This document provides general specifications for KÖCO threaded studs including yield values, tensile loads, torque values, and shear strengths for mild steel grade 4.8 and high strength steel grade KÖCO K800 studs in various diameters and thread types. It notes that the information is provided without warranty and users are responsible for safe use. Torque values assume no plastic thread deformation and depend on the nut used. Studs should not be loaded to the yield point and safety factors must be applied per regulations. Contact application engineering for additional information.
This document provides general specifications for KÖCO threaded studs including yield values, tensile loads, torque values, and shear strengths for mild steel grade 4.8 and high strength steel grade KÖCO K800 studs in various diameters and thread types. It notes that the information is provided without warranty and users are responsible for safe use. Torque values assume no plastic thread deformation and depend on the nut used. Studs should not be loaded to the yield point and safety factors must be applied per regulations. Contact application engineering for additional information.
This document provides general specifications for KÖCO threaded studs including yield values, tensile loads, torque values, and shear strengths for mild steel grade 4.8 and high strength steel grade KÖCO K800 studs in various diameters and thread types. It notes that the information is provided without warranty and users are responsible for safe use. Torque values assume no plastic thread deformation and depend on the nut used. Studs should not be loaded to the yield point and safety factors must be applied per regulations. Contact application engineering for additional information.
This document provides general specifications for KÖCO threaded studs including yield values, tensile loads, torque values, and shear strengths for mild steel grade 4.8 and high strength steel grade KÖCO K800 studs in various diameters and thread types. It notes that the information is provided without warranty and users are responsible for safe use. Torque values assume no plastic thread deformation and depend on the nut used. Studs should not be loaded to the yield point and safety factors must be applied per regulations. Contact application engineering for additional information.
Notes to be observed: All information given without warranty. KÖCO assumes no responsibility for any errors. The responsibility for safe dimensioning and use rests with the user.
Torque indications are based on the assumption that a plastic deformation of the thread does not take place. The achievable torque depends largely on the nut used. KÖCO supplies only studs, not complete sets. Therefore, the torque data are to be regarded as indicative only. A coefficient of friction of 0.18 is assumed both in the thread and between the nut and the base. The studs should not be loaded to the calculated yield point. A safety factor must be used, which can be found in the applicable regulations. For further information please contact our application engineering.
8/2019 Trillmich – General specifications Threaded studs.docx
Notes to be observed: All information given without warranty. KÖCO assumes no responsibility for any errors. The responsibility for safe dimensioning and use rests with the user.
Torque indications are based on the assumption that a plastic deformation of the thread does not take place. The achievable torque depends largely on the nut used. KÖCO supplies only studs, not complete sets. Therefore, the torque data are to be regarded as indicative only. A coefficient of friction of 0.18 is assumed both in the thread and between the nut and the base. The studs should not be loaded to the calculated yield point. A safety factor must be used, which can be found in the applicable regulations. For further information please contact our application engineering.
8/2019 Trillmich – General specifications Threaded studs.docx
