Basic Static Routing Lab v1.

00 – Aaron Balchunas 1

- Basic Static Routing Lab -

Basic Static Routing – Lab

Basic Objectives:
1. Configure and cable the Serial/Ethernet interfaces as indicated in the above
diagram.
2. Configure the IP addresses on the routers using the following
192.168.YY.x/24 scheme:

Router 1 – 2 = 192.168.12.x Router 7 – 8 = 192.168.78.x

Router 2 – 3 = 192.168.23.x Router 8 – 9 = 192.168.89.x
Router 3 – 4 = 192.168.34.x Router 9 – 10 = 192.168.109.x
Router 4 – 5 = 192.168.45.x Router 10 – 11 = 192.168.101.x
Router 5 – 6 = 192.168.56.x Router 11 – 12 = 192.168.112.x
Router 6 – 7 = 192.168.67.x

***
All original material copyright © 2006 by Aaron Balchunas ([email protected]),
unless otherwise noted. All other material copyright © of their respective owners.
This material may be copied and used freely, but may not be altered or sold without the expressed written consent
of the owner of the above copyright. Updated material may be found at http://www.routeralley.com.
 Basic Static Routing Lab v1.00 – Aaron Balchunas 2

Static Routing – Lab (continued)

Static Routing Objectives:

1. Can you ping the routers directly connected to you? Why or why not?
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________

2. Can you ping any router not directly connected to you? Why or why not?
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________

3. View your current routing table. What command did you use? What is
displayed?
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________

***
All original material copyright © 2006 by Aaron Balchunas ([email protected]),
unless otherwise noted. All other material copyright © of their respective owners.
This material may be copied and used freely, but may not be altered or sold without the expressed written consent
of the owner of the above copyright. Updated material may be found at http://www.routeralley.com.
 Basic Static Routing Lab v1.00 – Aaron Balchunas 3

Static Routing – Lab (continued)

4. Configure end-to-end connectivity using static routes. What commands did

you use to accomplish this?
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________

5. Can you now ping every router not directly connected to you? Why or why
not?
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
***
All original material copyright © 2006 by Aaron Balchunas ([email protected]),
unless otherwise noted. All other material copyright © of their respective owners.
This material may be copied and used freely, but may not be altered or sold without the expressed written consent
of the owner of the above copyright. Updated material may be found at http://www.routeralley.com.
 Basic Static Routing Lab v1.00 – Aaron Balchunas 4

Static Routing – Lab (continued)

6. Perform a traceroute from your router to the furthest router from you. What
were the results?
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________

7. View the routing table again. Now what does it show?

_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________

***
All original material copyright © 2006 by Aaron Balchunas ([email protected]),
unless otherwise noted. All other material copyright © of their respective owners.
This material may be copied and used freely, but may not be altered or sold without the expressed written consent
of the owner of the above copyright. Updated material may be found at http://www.routeralley.com.
 Basic Static Routing Lab v1.00 – Aaron Balchunas 5

Static Routing – Lab (continued)

8. Unplug one of the cables from your router (either Ethernet or Serial). View
your routing table again. Has anything changed? Why or why not?
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________

9. Save the configuration. What command did you use?

_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________

***
All original material copyright © 2006 by Aaron Balchunas ([email protected]),
unless otherwise noted. All other material copyright © of their respective owners.
This material may be copied and used freely, but may not be altered or sold without the expressed written consent
of the owner of the above copyright. Updated material may be found at http://www.routeralley.com.