Sony Dav-Is10 Manual PDF

3-212-589-31(1)
DVD Home Theatre System

Operating Instructions
(1)
©2007 Sony Corporation
Sony Corporation Printed in Malaysia http://www.sony.net/
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb02reg.fm]
masterpage:Left
specdef v20060111
Disposal of Old
WARNING Electrical & Electronic
Equipment (Applicable
To reduce the risk of fire or electric in the European Union
shock, do not expose this apparatus to and other European
rain or moisture. countries with separate
collection systems)
Caution – The use of optical instruments This symbol on the product or on
with this product will increase eye its packaging indicates that this
hazard. product shall not be treated as household waste. Instead
it shall be handed over to the applicable collection
Do not install the appliance in a confined space, such point for the recycling of electrical and electronic
as a bookcase or built-in cabinet. equipment. By ensuring this product is disposed of
To prevent fire, do not cover the ventilation of the correctly, you will help prevent potential negative
apparatus with news papers, table-cloths, curtains, etc. consequences for the environment and human health,
And don’t place lighted candles on the apparatus. which could otherwise be caused by inappropriate
To prevent fire or shock hazard, do not place objects waste handling of this product. The recycling of
filled with liquids, such as vases, on the apparatus. materials will help to conserve natural resources. For
Batteries or batteries installed apparatus shall not be more detailed information about recycling of this
exposed to excessive heat such as sunshine, fire or the product, please contact your local Civic Office, your
like. household waste disposal service or the shop where
you purchased the product.
Don’t throw away the battery with The manufacturer of this product is Sony Corporation,
general house waste, dispose of it 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The
correctly as chemical waste. Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart, Germany. For any service
or guarantee matters please refer to the addresses given
This appliance is in separate service or guarantee documents
classified as a CLASS 1
LASER product. This
marking is located on Precautions
the bottom exterior.
On power sources
• AC power cord (mains lead) must be changed only at
the qualified service shop.
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet (mains), even if the unit itself has been turned
off.
• Install this system so that the AC power cord (mains
lead) can be unplugged from the wall socket
immediately in the event of trouble.
Welcome!
Thank you for purchasing Sony DVD Home
Theatre System. Before operating this system,
please read this manual thoroughly and retain it
for future reference.
2GB
model name [DAV-IS10]

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb02regTOC.fm]
masterpage:Right
specdef v20060111
Table of Contents
Welcome!................................................ 2 Enjoying STB (Set Top Box) Digital
About This Manual ................................. 5 Sound or Digital Satellite Receiver
This System Can Play the Following Sound from the System .................. 45
Discs .................................................5 (STB SYNCHRO)
Getting Started – BASIC – Various Functions for Playing
Step 1: Positioning the Speakers.............9 Discs
Step 2: Connecting the System ............. 12 Searching for a Particular Point on
Step 3: Connecting the TV.................... 17 a Disc.............................................. 47
Step 4: Performing the Quick Setup ..... 18 (Scan, Slow-motion Play, Freeze
Getting Started Frame)
– ADVANCED – Searching for a Title/Chapter/Track/
Scene, etc........................................ 48
Connecting the TV (Advanced) ............ 21 Searching by Scene............................... 49
Connecting Other Components............. 24 (Picture Navigation)
Installing the Speakers on a Wall.......... 26 Resuming Playback from the Point Where
Basic Operations You Stopped the Disc..................... 50
Playing Discs ........................................ 30 (Resume Play)
Enjoying the Radio or Other Creating Your Own Program................ 51
Components .................................... 33 (Program Play)
Enjoying TV or VCR Sound from All Playing in Random Order ..................... 53
Speakers.......................................... 35 (Shuffle Play)
Selecting the Movie or Music Mode..... 36 Playing Repeatedly ............................... 54
(Repeat Play)
Sound Adjustments Using the DVD’s Menu ........................ 55
Enjoying Surround Sound by Using Sound Changing the Sound.............................. 55
Field ................................................ 37 Selecting [ORIGINAL] or [PLAY LIST]
Adjusting the Bass, Middle, and Treble on a DVD-R/DVD-RW.................. 57
Level ............................................... 38 Viewing Information About the Disc ... 58
Using the HDMI CONTROL Changing the Angles ............................ 61
Function for ‘BRAVIA’ Theatre Displaying the Subtitles........................ 61
Adjusting the Delay Between the Picture
Sync
and Sound....................................... 62
Preparing for the HDMI CONTROL (A/V SYNC)
function ........................................... 40 About MP3 Audio Tracks and JPEG
Watching DVD by a Single Button Image Files ..................................... 62
Press................................................ 42 Playing DATA CDs or DATA DVDs with
(One-Touch Play) MP3 Audio Tracks and JPEG Image
Enjoying the TV Sound from the Speakers Files ................................................ 64
in this System.................................. 43 Playing Audio Tracks and Images as a
(System Audio Control) Slide Show with Sound .................. 66
Turning off the System with the TV ..... 44 Enjoying DivX® Videos....................... 68
(System Power Off) Playing VIDEO CDs with PBC Functions
(Ver.2.0) ......................................... 70
(PBC Playback)
continued
3GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb02regTOC.fm]
masterpage:Left
specdef v20060111
Tuner Functions Additional Information

Presetting Radio Stations ...................... 71 Precautions ........................................... 98
Listening to the Radio ........................... 72 Notes about the Discs ........................... 99
Using the Radio Data System (RDS).... 74 Troubleshooting.................................... 99
Other Operations Self-diagnosis Function ...................... 103
(When letters/numbers appear in
Controlling the TV with the Supplied the display)
Remote............................................ 75 Specifications ..................................... 104
Enjoying Multiplex Broadcast Glossary.............................................. 105
Sound .............................................. 77 Language Code List............................ 108
(DUAL MONO) Index to Parts and Controls ................ 109
Enjoying the Sound at Low Volume..... 77 Guide to the Control Menu Display ... 114
(NIGHT MODE) DVD Setup Display List..................... 117
Using the Sleep Timer .......................... 78 System Menu List............................... 119
Changing the Brightness of the Front Tuner Menu List ................................. 119
Panel Display .................................. 78 Index ................................................... 120
Changing the Display Mode ................. 79
(INFORMATION MODE)
Changing the Display Appearance of the
Soft-touch Buttons .......................... 79
(ILLUMINATION MODE)
Using the DIGITAL MEDIA PORT
Adapter ........................................... 80
Advanced Settings and
Adjustments
Locking Discs ....................................... 82
(CUSTOM PARENTAL
CONTROL, PARENTAL
CONTROL)
Calibrating the Appropriate Settings
Automatically ................................. 85
(AUTO CALIBRATION)
Using the Setup Display........................ 88
Setting the Display or Sound Track
Language ........................................ 89
[LANGUAGE SETUP]
Settings for the Display......................... 90
[SCREEN SETUP]
Custom Settings .................................... 93
[CUSTOM SETUP]
Settings for the Speakers....................... 94
[SPEAKER SETUP]
Returning to the Default Settings.......... 97
4GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
About This Manual This System Can Play the

• The instructions in this manual describe the Following Discs
controls on the remote. You can also use the
controls on the control unit if they have the Format of
same or similar names as those on the remote. Disc logo
discs
• The Control Menu items may be different DVD VIDEO
depending on the area.
• “DVD” may be used as a general term for
DVD VIDEOs, DVD+RWs/DVD+Rs, and
DVD-RWs/DVD-Rs. DVD-RW/
DVD-R
• The following symbols are used in this
manual.
Symbol Meaning DVD+RW/

Functions available for DVD DVD+R
VIDEOs, DVD-Rs/DVD-RWs in
video mode, and DVD+Rs/
DVD+RWs
Functions available for DVD-Rs/
DVD-RWs in VR (Video
Recording) mode
Functions available for VIDEO
VIDEO CD
CDs (including Super VCDs or CD-
(Ver. 1.1 and
Rs/CD-RWs in video CD format or
Super VCD format) 2.0 discs)/
Audio CD
Functions available for music CDs
or CD-Rs/CD-RWs in music CD CD-RW/CD-R
format (audio data)
(MP3 files)
Functions available for DATA CDs (JPEG files)
(CD-ROMs/CD-Rs/CD-RWs)
containing MP31) audio tracks,
JPEG image files, and DivX2)3)
video files
Functions available for DATA
DVDs (DVD-ROMs/DVD-Rs/
“DVD+RW,” “DVD-RW,” “DVD+R,”
DVD-RWs/DVD+Rs/DVD+RWs)
“DVD VIDEO,” and the “CD” logos are trademarks.
containing MP31) audio tracks,
JPEG image files, and DivX2)3)
video files
1)MP3 (MPEG1 Audio Layer 3) is a standard format

defined by ISO/MPEG which compresses audio data.
2) DivX® is a video file compression technology,
developed by DivX, Inc.
3)
DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under license.
continued
5GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
• An adapter to convert an 8 cm disc to standard

Note about CDs/DVDs size.
Adapter
The system can play CD-ROMs/CD-Rs/CD-
RWs recorded in the following formats:
– audio CD format
– video CD format
– MP3 audio tracks, JPEG image files, and
DivX video files of format conforming to ISO
9660 Level 1/Level 2, or its extended format,
Joliet • A disc with paper or stickers on it.
• A disc that has the adhesive of cellophane tape
The system can play DVD-ROMs/DVD+RWs/ or a sticker still left on it.
DVD-RWs/DVD+Rs/DVD-Rs recorded in the
following formats: Notes about CD-R/CD-RW/DVD-R/
DVD-RW/DVD+R/DVD+RW
– MP3 audio tracks, JPEG image files, and
DivX video files of format conforming to In some cases, CD-R/CD-RW/DVD-R/DVD-
UDF (Universal Disk Format) RW/DVD+R/DVD+RW cannot be played on
this system due to the recording quality or
physical condition of the disc, or the
Example of discs that the characteristics of the recording device and
system cannot play authoring software.
The disc will not play if it has not been correctly
The system cannot play the following discs:
finalized. For more information, see the
• CD-ROMs/CD-Rs/CD-RWs other than those
operating instructions for the recording device.
recorded in the formats listed on page 5
Note that some playback functions may not
• CD-ROMs recorded in PHOTO CD format work with some DVD+RWs/DVD+Rs, even if
• Data part of CD-Extras they have been correctly finalized. In this case,
• DVD Audios view the disc by normal playback. Also some
• DATA DVDs that do not contain MP3 audio DATA CDs/DATA DVDs created in Packet
tracks, JPEG image files, or DivX video files Write format cannot be played.
• DVD-RAMs
Music discs encoded with
• A DVD VIDEO with a different region code
(page 7, 107). copyright protection
• Super Audio CD technologies
• A disc that has a non-standard shape (e.g., card This product is designed to play back discs that
shaped, heart shaped). conform to the Compact Disc (CD) standard.
• A disc that has a commercially available Recently, various music discs encoded with
accessory attached, such as a label or ring. copyright protection technologies are marketed
Ring by some record companies. Please be aware that
among those discs, there are some that do not
Label
conform to the CD standard and may not be
playable by this product.
6GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Note on DualDiscs operating instructions supplied with the DVDs

A DualDisc is a two sided disc product which or VIDEO CDs.
mates DVD recorded material on one side with
digital audio material on the other side. Copyrights
However, since the audio material side does not
conform to the Compact Disc (CD) standard, This product incorporates copyright protection
playback on this product is not guaranteed. technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
About Multi Session CD authorized by Macrovision, and is intended for
• This system can play Multi Session CDs when home and other limited viewing uses only unless
an MP3 audio track is contained in the first otherwise authorized by Macrovision. Reverse
session. Any subsequent MP3 audio tracks engineering or disassembly is prohibited.
recorded in later sessions can also be played
This system incorporates with Dolby* Digital
back.
and Dolby Pro Logic (II) adaptive matrix
• This system can play Multi Session CDs when surround decoder and the DTS** Digital
a JPEG image file is contained in the first Surround System.
session. Any subsequent JPEG image files
recorded in later sessions can also be played * Manufactured under license from Dolby
back. Laboratories.
• If audio tracks and images in music CD format “Dolby,” “Pro Logic,” and the double-D symbol are
or video CD format are recorded in the first trademarks of Dolby Laboratories.
session, only the first session will be played ** Manufactured under license from DTS, Inc. “DTS”
and “DTS Digital Surround” are registered
back.
trademarks of DTS, Inc.
Region code
Your system has a region code printed on the
bottom of the control unit and will only play
DVDs labeled with the same region code.
DVD VIDEOs labeled ALL will also play on this

system.
If you try to play any other DVD VIDEO, the
message [Playback prohibited by area
limitations.] will appear on the TV screen.
Depending on the DVD VIDEO, no region code
indication may be given even though playing the
DVD VIDEO is prohibited by area restrictions.
Note on playback operations

of DVDs and VIDEO CDs
Some playback operations of DVDs and VIDEO
CDs may be intentionally set by software
producers. Since this system plays DVDs and
VIDEO CDs according to the disc contents the
software producers designed, some playback
features may not be available. Be sure to read the
7GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb04gsb.fm]
masterpage:Left
specdef v20060111
Getting Started – BASIC –

Unpacking
• Control unit (1)
• Speakers (5)
• Subwoofer (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Video Cord (1)
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
• Brackets (5)
• Wrench (1)
• Operating Instructions
• Quick Start Guide (card) (1)
Inserting batteries into the remote

You can control the system using the supplied remote. Insert two R6 (size AA) batteries by matching
the 3 and # ends on the batteries to the markings inside the compartment. To use the remote, point it
at the remote sensor on the control unit.
Note
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting apparatus. Doing so may cause a malfunction.
• If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
8GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Step 1: Positioning the Using the subwoofer

efficiently
Speakers

To reinforce the bass sound, place the subwoofer
For the best possible surround sound, all the possible close to a wall.
speakers other than the subwoofer should be Close to a wall
placed at the same distance from the listening
position (1). It is recommended that the
subwoofer should be placed (2).
Place speakers and subwoofer as illustrated

below.
Front speaker (L)
Center speaker
Subwoofer
2 Front speaker (R)

Note
• If the subwoofer is to be placed ahead of the front
speaker, the distance should be less than 0.5 m.*
*
1 1 1
1 1
Surround speaker (L) Surround speaker (R)
Tip
• You can also place the subwoofer either side, facing
the listening position. • You may not get the bass sound efficiently when the
• When you install the speaker, the speaker face may be subwoofer is placed outside (3). You need to adjust
unstable. In this case, use a commercially available the setting of the distance from the listening position.
wire clamper or a commercially available tape, etc.,
to secure the speaker cord. 3 3
continued
9GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
• Do not place objects on the top of the subwoofer • Do not place the subwoofer back of the obstruction,
where the speaker unit is installed. such as TV, etc. Middle range sound will fall.
TV etc.
• Do not place the subwoofer under a desk or in a

cabinet, etc.
Note
• Do not set the speakers in an inclined position.
• Do not place the speakers in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight
• Use caution when placing the speakers and/or
speaker stands (not supplied) that are attached with
the speakers on a specially treated (waxed, oiled,
polished, etc.) floor, as staining or discoloration may
result.
• When cleaning, use a soft cloth such as a cleaning
cloth for glasses.
• Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine.
• Image distortion on the TV screen may occur
depending on the location of the subwoofer. In this
case, place the subwoofer away from the TV.
Tip
• When you change the positions of the speakers, it is
recommended that you change the settings. For
details, see “Calibrating the Appropriate Settings
Automatically” (page 85).
10GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Note on handling the subwoofer

• Do not place your hand into the slit of the subwoofer
when lifting it. The speaker driver may be damaged.

When lifting, hold the bottom of the subwoofer.
Subwoofer
Slits
• Do not push the top of the subwoofer where the
speaker unit is installed.
Speaker unit
11GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Step 2: Connecting the System

The following is the basic connection of the system.
Refer to the connection diagram below, and read the additional information from 1 to 4 on the
following pages.
2 Front 2 Center speaker 2 Front

speaker (L) speaker (R)
3 AM loop antenna (aerial) Rear of the control unit
DMPORT
3 FM wire
antenna
(aerial)
Bottom of the 1 Plug
subwoofer
SYSTEM CONTROL ONLY FOR HCD-IS10
SPEAKER ONLY FOR SS-IS10
FRONT R FRONT L SUR R SUR L CENTER
Subwoofer 4 AC power cord

(mains lead)
2 Surround 2 Surround
speaker (L) speaker (R)
12GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
1 Connecting the Control unit

Connect the system connector of the control unit to the SYSTEM CONTROL jack of the subwoofer.

Insert the plug of the SYSTEM CONTROL cord, then secure the screws of the plug.
Bottom of the subwoofer

Rear of the control unit
DMPORT
Subwoofer
Plug
SYSTEM CONTROL cord

Screws
continued
13GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
2 Connecting the Speakers

Connect the connectors of the speaker cords to their corresponding SPEAKER jacks. The connectors
of the speaker cords are the same color as the jacks to be connected.
Front speaker (R) Front speaker (L) Center speaker
Speaker cords
Red Green
White
Subwoofer
Bottom of the
subwoofer
Gray Blue
Speaker cords
Surround speaker (R) Surround speaker (L)
3 Connecting the Antenna (Aerial)

To connect the AM loop antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1 Remove only the loop part from the plastic stand.
2 Set up the AM loop antenna (aerial).
14GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
3 Connect the cords to the AM antenna (aerial) terminals.

The cords can be connected to either terminal.

Insert the cords pushing down the terminal clamp.
DMPORT
Insert until this

part.
Note
• Do not place the AM loop antenna (aerial) near the system or other AV equipment, as noise may result.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4 Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.
To connect the FM wire antenna (aerial)

Connect the FM wire antenna (aerial) to the FM 75 Ω COAXIAL jack.
FM wire antenna (aerial)

(supplied)
DMPORT
FM 75 Ω COAXIAL jack
Note
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
Tip
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the control unit to an outdoor
FM antenna (aerial) as shown below.
Outdoor FM antenna (aerial)
continued
15GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
4 Connecting the AC power cord (mains lead)

Before connecting the AC power cord (mains lead) of the subwoofer to a wall outlet (mains), connect
all the speakers to the subwoofer (page 14).

Subwoofer
To a wall outlet
(mains)
AC power cord
(mains lead)
Note
• After connecting the AC power cord (mains lead), wait about 20 seconds before turning on the power by pressing
"/1.
16GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Step 3: Connecting the TV

The following is the basic connection of the control unit and TV. For other TV connections, see
page 21. For other component connections, see page 24.
: Video signal flow TV

: Audio signal flow
AUDIO VIDEO
OUT IN
B L
DMPORT
Required cords
A Video cord
.
Yellow
This connection sends the image to the TV. Connect the VIDEO OUT (VIDEO) jack of the control unit
to the VIDEO IN jack of the TV.
B Audio cord (not supplied)

White (L/audio)
Red (R/audio)
This connection sends TV sound to the system. You can enjoy TV sound from the speakers with this
connection. Connect the TV (AUDIO IN) jacks of the control unit to the AUDIO OUT jacks of the TV.
Note
• When connecting the jack, insert the plug into the jack as far as it will go.
Example
Incorrect
Correct
17GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
4 Press without inserting a disc.

Step 4: Performing the The Setup Display for selecting the
language used in the on-screen display
Quick Setup
appears on the TV screen.
Follow the steps below to make the minimum LANGUAGE SETUP

number of basic adjustments for using the OSD: ENGLISH
MENU: ENGLISH
system. AUDIO: FRANÇAIS
SUBTITLE: DEUTSCH
ITALIANO
"/1 ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
5 Press X/x to select a language.

The system displays the menu and subtitles
in the selected language.
C/X/x/c,
6 Press .
DISPLAY
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
SCREEN SETUP
TV TYPE: 16:9
YCBCR/RGB (HDMI): 16:9
SCREEN SAVER: 4:3 LETTER BOX
BACKGROUND: 4:3 PAN SCAN
4:3 OUTPUT: FULL
1 Turn on the TV.
2 Press [/1.
The system turns on.
3 Switch the input selector on your TV so
7 Press X/x to select the setting that
matches your TV type.
that the signal from the system
appears on the TV screen. x If you have a wide-screen TV or a 4:3
[Press [ENTER] to run QUICK SETUP.] standard TV with a wide-screen mode
appears at the bottom of the TV screen. If [16:9] (page 90)
this message does not appear, recall the x If you have a 4:3 standard TV
Quick Setup display (page 20) and perform [4:3 LETTER BOX] or [4:3 PAN SCAN]
again. (page 90)
8 Press .
The [AUTO CALIBRATION] display
appears.
AUTO CALIBRATION
Connect calibration mic. Start

measurement?
YES
NO
18GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
9 Connect the calibration mic to the volume down. Give consideration to children
ECM-AC2 jack on the rear of the control and neighbor.
unit, and set it up at the ear level using • Avoid being in the measurement area and

a tripod, etc. (not supplied). making noise during the measurement (which
The front of each speaker should face the takes about 1 minute), as it may interfere with
measurement.
calibration mic, and there should be no
obstruction between the speakers and the 11 Unplug the calibration mic and press C/
calibration mic. c to select [YES].
Note
Measurement complete.
• The ECM-AC2 jack is used for the supplied FRONT L : 5.00m 0.0dB
calibration mic only. Do not connect other FRONT R : 5.00m 0.0dB
microphones. CENTER : 5.00m + 1.0dB
SUBWOOFER : 5.00m + 4.0dB
Rear of the control unit SURROUND L : 3.00m - 2.0dB
SURROUND R : 3.00m - 2.0dB
If OK, unplug calibration mic and select
“YES”.
YES NO
DMPORT
Note
• The environment of the room in which the
system is installed may affect measurements.
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
To ECM-AC2 jack
12 Press .
Calibration mic
Quick Setup is finished. All connections
and setup operations are complete.
To quit the Quick Setup

Press DISPLAY in any Step.
Tip
• If you cancel [AUTO CALIBRATION], perform the
speaker settings in “Settings for the Speakers”
(page 94).
• If you change the position of the speakers, reset the
speaker settings. See “Calibrating the Appropriate
Settings Automatically” (page 85).
• If you want to change any of the settings, see “Using
the Setup Display” (page 88).
• For details on [AUTO CALIBRATION] and the error
messages of [AUTO CALIBRATION], see
“Calibrating the Appropriate Settings Automatically”
(page 85).
10 Press X/x to select [YES], then press

.
[AUTO CALIBRATION] starts. Be quiet
during the measurement.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the
continued
19GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
To recall the Quick Setup display

1 Press DISPLAY when the system is in
stop mode.
The Control Menu display appears on the TV

screen.
2 Press X/x to select [SETUP], then
press .
The options for [SETUP] appear.
12(27)
18(34) DVD VIDEO
T 0:00:02
QUICK
QUICK
CUSTOM
RESET
BNR
3 Press X/x to select [QUICK], then press .

The Quick Setup display appears.
20GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb05gsa.fm]
masterpage:Right
specdef v20060111
Getting Started – ADVANCED –
Connecting the TV (Advanced)

Connecting the TV with the video cord/component video cord/
HDMI cable
Sends the played back DVD image to the connected TV.
Check the jacks of your TV, and choose connection method A, B, or C. Picture quality improves in
order from A (standard) to C (HDMI).
To HDMI OUT jack To the HDMI input

jack
Rear of the
control unit
IN
DMPORT
C TV with HDMI IN jack

To VIDEO OUT To VIDEO OUT
(VIDEO) jack (COMPONENT) jacks
VIDEO
IN Y
PB/CB
To the video To the component
input jack video input jacks PR/CR
A TV with VIDEO IN jack B TV with COMPONENT

VIDEO IN jacks
: Signal flow
Note
• When connecting the HDMI cable, make sure that the direction of jacks are the same.
.
continued
21GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
A To connect to a TV with the VIDEO IN jack

Connect the video cord.
.
Yellow
B To connect to a TV with the COMPONENT VIDEO IN jacks

Connect a component video cord (not supplied). To use the VIDEO OUT (COMPONENT) jacks (Y,
PB/CB, PR/CR) instead of the video jacks, your TV monitor must be equipped with COMPONENT
VIDEO IN jacks (Y, PB/CB, PR/CR). If your TV accepts progressive format signals, you can use this
connection and set the output channel of the system to progressive format (this system is compatible
with the 525 or 625 progressive format) (page 91).
Red
Blue
Green
C To connect to a TV with the HDMI (high-definition multimedia

interface)/DVI (digital visual interface) IN jack
Use a certified HDMI (high-definition multimedia interface) cable (not supplied) to enjoy high quality
digital picture and sound through the HDMI OUT (high-definition multimedia interface out) jack.
HDMI (high-definition multimedia interface)

The system incorporates High-Definition Multimedia Interface (HDMITM) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
To connect to a TV with DVI (digital visual interface) input
Use an HDMI (high-definition multimedia interface)-DVI (digital visual interface) converter cord (not
supplied) with an HDMI (high-definition multimedia interface)-DVI (digital visual interface) adaptor
(not supplied). The DVI (digital visual interface) jack will not accept any audio signals. Furthermore,
you cannot connect the HDMI OUT (high-definition multimedia interface out) jack to DVI (digital
visual interface) jacks that are not HDCP (high-bandwidth digital content protection) compliant (e.g.,
DVI (digital visual interface) jacks on PC displays).
22GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Connecting the TV with the digital optical cord

A TV with a digital optical out jack (TV with built-in digital satellite receiver, etc.) can be connected
to the TV (DIGITAL IN OPTICAL) jack instead of the TV (AUDIO IN) jacks on the rear of the control
unit.
The system can accept both the digital and analog signals. Digital signals have priority over analog

signals. If the digital signal ceases, the analog signal will be processed after a few seconds.
TV with the digital optical jack Rear of the control unit
OPTICAL
DIGITAL
OUT
DMPORT
To the digital
optical output jack To TV (DIGITAL
IN OPTICAL) jack
: Audio signal flow
Note
• When connecting the digital optical cord, insert the connector until it clicks.
23GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Connecting Other Components

You can enjoy other components.
Connecting the system and the other component

Outputs the other component through the speakers of this system.
VCR, digital satellite
receiver, etc.
To the digital
coaxial output jack
COAXIAL
DIGITAL
OUT
To SAT/CABLE
(DIGITAL IN COAXIAL) jack
Rear of the
control unit
DMPORT
To DMPORT jack
DIGITAL MEDIA
PORT adapter
: Signal flow
Note
• Do not connect or disconnect the DIGITAL MEDIA PORT adapter to/from the control unit while the system is
turned on.
• When connecting the DIGITAL MEDIA PORT adapter, be sure to match the V marks.
.
Tip
• You can assign a digital sound input corresponding with the function “TV” and “SAT/CABLE.” For details, see
[DIGITAL IN] (page 93).
24GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
To connect the DIGITAL MEDIA PORT adapter

Connect a DIGITAL MEDIA PORT adapter (not supplied) to the DMPORT jack. For details of the
DIGITAL MEDIA PORT adapter, see “Using the DIGITAL MEDIA PORT Adapter” (page 80).
If you connect a digital satellite receiver with a DIGITAL OUT (COAXIAL
or OPTICAL) jack

A digital satellite receiver can be connected to the SAT/CABLE (DIGITAL IN COAXIAL) or TV
(DIGITAL IN OPTICAL) jack.
To connect, use a digital coaxial cord (not supplied) for the SAT/CABLE (DIGITAL IN COAXIAL)
jack or digital optical cord (not supplied) for the TV (DIGITAL IN OPTICAL) jack.
The system can accept both digital and analog signals. Digital signals have priority over analog signals.
If the digital signal ceases, the analog signal will be processed after a few seconds.
Digital coaxial cord
Digital optical cord
Note
• Be sure to make connections securely to avoid hum and noise.
25GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Installing the Speakers on a Wall

You can use the speakers installed on a wall.
Installing the speakers on a wall

1 Prepare screws (not supplied) that are suitable for the holes of the bracket.
2 Secure the bracket to the wall using hole 1.
3 4
Tip
• To prevent the speaker from rotating, use the hole 2, too.
3 Remove the rear cap using the wrench (supplied), and remove the speaker pedestal
using a screwdriver (+) (not supplied).
Wrench (supplied)
Rear cap
26GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
4 Push A with the supplied wrench (1), and then remove the speaker cords (2).
(2)

(1) A
When the lever is down, the When the lever is up, the
speaker cords are locked. speaker cords can be removed.
5 Thread the speaker cords through hole 3.
6 Reconnect the detached speaker cords, matching 3/# to the appropriate speaker
terminals (1), and then push the lever down completely (2).
(2)
(1)
Tip
• If it is difficult to push the lever down, use the wrench (supplied).
continued
27GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
7 Reattach the rear cap using the wrench (supplied).
8 Secure the speaker to the bracket with the screw in Step 3 using hole 4.
Note
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
About connecting speaker cord

The connectors of the speaker cords are the same color as the jacks to be connected.
Do not catch the

# speaker cords
insulation in the speaker
Black terminals.
28GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Tip
• You can remove the speaker cords from the connector. With the catch facing down, press and hold the connector
down against a flat surface (1) and remove the speaker cords from the connector (2).
(1)
(2)

Catch
To avoid short-circuiting the speakers

Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch
another speaker terminal or the bare wire of another speaker cord, such as shown below.
Stripped speaker cord is Stripped cords are touching each

touching another speaker other due to excessive removal of
terminal. insulation.
Note
• Be sure to match the speaker cords to the appropriate speaker terminals: 3 to +, and # to –. If the cords are
reversed, the sound will lack bass and may be distorted.
29GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb06bas.fm]
masterpage:Left
specdef v20060111
Basic Operations
Playing Discs
Depending on the DVD or VIDEO CD, some operations may be different or restricted.
Basic Operations
Refer to the operation details supplied with your disc.
Soft-touch buttons
"/1
FUNCTION VOLUME
Z
FUNCTION
/
Z
./>
"/1 Disc slot H
X
Note
• Soft-touch buttons function by touching lightly. Do not press x
them strongly. VOLUME +/–
• Do not place objects on the top of the control unit. Doing so MUTING
may activate the soft-touch buttons or deactivate the buttons
of the control unit.
Tip
• Soft-touch buttons function when they are lit up.
• You can select the way of displaying the soft-touch buttons
located on the top of the control unit (page 79).
30GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
1 Turn on your TV.

2 Switch the input selector on the TV to this system.
3 Press "/1.
The system turns on.
Unless the mode of the system is set to “DVD,” press FUNCTION on the remote or FUNCTION
(soft-touch button) on the control unit to select “DVD.”
“No Disc” appears in the front panel display and the system is ready for loading the disc.
Basic Operations
4 Load a disc.
Push the disc into the disc slot until the disc is pulled in automatically.
Labeled side facing to upper surface
The disc is drawn into the control unit automatically and the following indication appears in the
front panel display.
5 Press H on the remote, or touch N (soft-touch button) on the control unit.

The system starts playback (continuous play).
Adjust the VOLUME +/– on the remote or touch the VOLUME +/– (soft-touch button) on the
control unit.
Tip
• You can change the speed at which the volume is turned up and down.
To turn the volume up/down quickly:
– Press and hold the VOLUME +/– on the remote.
– Touch the VOLUME +/– (soft-touch button) on the control unit, when “VOLUME XX” (X is a number) appears,
touch and hold the VOLUME +/–.
To set the volume up/down precisely:
– Press the VOLUME +/– briefly on the remote.
– Touch briefly VOLUME +/– (soft-touch button) on the control unit.
• When you connect the system and TV with the HDMI cable, you can operate them simply using the HDMI
CONTROL function. For details, see page 39.
Note
• When you set the HDMI CONTROL function to on, the TV that is connected to the control unit with the HDMI
cable can be synch-operated with the system. For details, see page 39.
continued
31GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
To save the power in standby mode

Press "/1 while the system turns on. To cancel standby mode, press "/1 once.
Note
• When the system is turned off, do not push a disc into the control unit.
Additional operations
To Press
Basic Operations
Stop x
Pause X
Resume play after pause X / H on the remote or N (soft-touch button) on the
control unit.
Go to the next chapter, track, > (except for JPEG)
or scene
Go back to the preceding . (except for JPEG)
chapter, track, or scene
Turn off the sound MUTING. To cancel muting, press it again or VOLUME
temporarily + to adjust the sound volume.
Stop play and remove the Z
disc
Replay the previous scene* (instant replay) during playback.
Briefly fast forward the (instant advance) during playback.
current scene**
* DVD VIDEOs/DVD-RWs/DVD-Rs only. The button can be used except for DivX video files.
** DVD VIDEOs/DVD-RWs/DVD-Rs/DVD+RWs/DVD+Rs only. The button can be used except for DivX video
files.
Note
• You may not be able to use the instant replay or instant advance function with some scenes.
32GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Enjoying the Radio or Other Components
Selecting the connected component

You can use a TV, VCR, or other components connected to the TV or SAT/CABLE jacks on the rear
of the control unit. Refer to the operating instructions supplied with the components for further
information.
Basic Operations
FUNCTION
Press FUNCTION repeatedly until the desired function name appears in the front panel
display.
Each time you press FUNCTION, the mode of the system changes in the following sequence.
DVD t FM t AM t TV t SAT/CABLE t DMPORT t DVD t …

Tip
• You can assign a digital sound input corresponding with the function “TV” and “SAT/CABLE.” For details, see
[DIGITAL IN] (page 93).
Note
• When you use both the TV (AUDIO IN) jacks (analog connection) and TV (DIGITAL IN OPTICAL) jack (digital
connection) at the same time, the digital connection takes priority.
continued
33GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Changing the input level of the sound from connected

components
Distortion may occur when listening to a component connected to the TV (AUDIO IN) jacks on the
rear of the control unit. This is not a malfunction and will depend on the component connected.
To prevent this, you can change the input level from the sound of the other components.
Basic Operations
FUNCTION
X/x/c,
SYSTEM
MENU
With the cover opened.
1 Press FUNCTION repeatedly until “TV” appears in the front panel display.
2 Press SYSTEM MENU.
3 Press X/x repeatedly until “ATTENUATE” appears in the front panel display, then press
or c.
4 Press X/x to select a setting.
The default setting is underlined.
• “ATT ON”: attenuates the input level. The output level is changed.
• “ATT OFF”: normal input level.
5 Press .
The setting is made.
The system menu turns off.
Note
• “ATTENUATE” appears only when the function is set to the “TV” function.
34GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Enjoying TV or VCR Sound from All Speakers

You can enjoy TV or VCR sound from all the speakers in this system.
For details, see “Step 3: Connecting the TV” (page 17), “Connecting the TV (Advanced)” (page 21),
and “Connecting Other Components” (page 24).
Basic Operations
FUNCTION
SOUND
FIELD
1 Press FUNCTION repeatedly until “TV” or “SAT/CABLE” appears in the front panel
display.
2 Press SOUND FIELD repeatedly until the sound field you want appears in the front panel
display.
When you want to output the TV sound or stereo sound of a 2 channel source from the all speakers,
select the “PLII MOVIE” or “PLII MUSIC” sound field.
For details of sound field, see page 37.
Note
• When you set the [HDMI CONTROL] setting in [CUSTOM SETUP] to [ON] (page 93), the System Audio Control
function is activated and no sound may be output from the TV. For details, see page 43.
• When you use both the TV (AUDIO IN) jacks (analog connection) and TV (DIGITAL IN OPTICAL) jack (digital
connection) at the same time, the digital connection takes priority.
35GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Selecting the Movie or Music Mode
You can choose a suitable sound mode for movies or music.

Basic Operations
MOVIE/
MUSIC
Press MOVIE/MUSIC during playback.

Press MOVIE/MUSIC repeatedly until the mode you want appears in the front panel display. The
default setting is underlined.
• “AUTO”: selects the mode automatically to produce the sound effect depending on the disc or sound
stream.
• “MOVIE”: provides sound suitable for movies.
• “MUSIC”: provides sound suitable for music.
Tip
• When the movie or music mode is selected, “MOVIE” or “MUSIC” lights up in the front panel display. When
neither “MOVIE” or “MUSIC” lights up in the front panel display, “AUTO” is selected.
Note
• Depending on the disc or source, when you select “AUTO,” the beginning of the sound may be cut off as the
optimum mode is automatically selected. To avoid cutting the sound, select “MOVIE” or “MUSIC.”
36GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb07sou.fm]
masterpage:Right
specdef v20060111
Automatic outputting of the

Sound Adjustments original sound
Enjoying Surround Sound x AUTO FORMAT DIRECT STANDARD

The auto decoding function automatically
by Using Sound Field detects the type of audio signal being input
(Dolby Digital, DTS, or standard 2 channel
stereo) and performs the proper decoding if
necessary. This mode presents the sound as it
was recorded/encoded, without adding any
You can take advantage of surround sound effects (e.g. reverberation).
Sound Adjustments
simply by selecting one of system’s pre- However, if there are no low frequency signals
programmed sound fields. They bring the (Dolby Digital LFE, etc.), it will generate a low
exciting and powerful sound of movie theaters frequency signal for output to the subwoofer.
into your home.
Outputting the sound from
multiple speakers
x AUTO FORMAT DIRECT MULTI
This mode lets you enjoy audio playback of all
types of discs from multiple speakers.
SOUND
Note
FIELD
• The sound is not output from multiple speakers
depending on the source.
• Depending on the disc or source, the beginning of the
sound may be cut off as the optimum mode is
automatically selected. To avoid cutting the sound,
select “A.F.D. STD.”
Outputting 2 channel sources

like CDs by 5.1channel
Press SOUND FIELD.
x Dolby Pro Logic II MOVIE/MUSIC
Press SOUND FIELD repeatedly until the sound Dolby Pro Logic II produces five full-bandwidth
field you want appears in the front panel display. output channels from 2 channel sources. This is
All sound field done using an advanced, high-purity matrix
surround decoder that extracts the spatial
Sound field Display properties of the original recording without
adding any new sounds or tonal colorations.
AUTO FORMAT DIRECT A.F.D. STD
STANDARD Note
AUTO FORMAT DIRECT A.F.D. MULTI • When the input signal is multi channel source, Dolby
MULTI Pro Logic II MOVIE/MUSIC are canceled and the
Dolby Pro Logic II MOVIE PLII MOVIE multi channel source is output directly.
• When the bilingual broadcast sound is input, Dolby
Dolby Pro Logic II MUSIC PLII MUSIC
Pro Logic II MOVIE/MUSIC are not effective.
PORTABLE AUDIO P. AUDIO
ENHANCER
OMNI-DIRECTIONAL OMNI-DIR
SOUND
continued
37GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb07sou.fm]
masterpage:Left
specdef v20060111
Enjoying the sound effect Adjusting the Bass,

x PORTABLE AUDIO ENHANCER
This mode reproduces a clear enhanced sound
Middle, and Treble Level
image from your portable audio device. This
You can adjust the bass, middle, and treble level
mode is ideal for MP3 and other compressed
easily.
music.
x OMNI-DIRECTIONAL SOUND
This mode reproduces the stereo effect
everywhere surrounding by five satellite
speakers.
To turn the surround effect off TONE

Press SOUND FIELD repeatedly until “A.F.D.
STD” appears in the front panel display. X/x,
Tip
• The system memorizes the last sound field selected
for each function mode.
Whenever you select a function such as DVD or
TUNER, the sound field that was last applied to
function is automatically applied again. For example,
if you listen to DVD with Dolby Pro Logic II MOVIE
as the sound field, then change to another function,
and then return to DVD, Dolby Pro Logic II MOVIE
will be applied again. 1 Press TONE repeatedly until “BASS,”
“MIDDLE,” or “TREBLE” appears in the
front panel display.
• “BASS”: adjusts the bass level
(–6.0 – +6.0 dB, 0.5 dB increments).
• “MIDDLE”: adjusts the middle level
(–6.0 – +6.0 dB, 0.5 dB increments).
• “TREBLE”: adjusts the treble level
(–6.0 – +6.0 dB, 0.5 dB increments).
2 Press X/x to adjust.
The adjusted value appears in the front
panel display.
3 Press .
38GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb08usi.fm]
masterpage:Right
specdef v20060111
Using the HDMI CONTROL Function for ‘BRAVIA’ Theatre Sync
‘BRAVIA’ Theatre Sync can be used only with Sony ‘BRAVIA’ TVs that carry this function.
By connecting Sony components that are compatible with the HDMI CONTROL function with an
HDMI cable (not supplied), operation is simplified as below:
• One-Touch Play (page 42): By pressing only H on the remote, the TV turns on and is set for DVD
input mode automatically, and the sound is output automatically from the speakers of this system.
• System Audio Control (page 43): While watching TV, you can select to output the sound from the
TV speaker or the speakers of this system.
• System Power Off (page 44): When you turn the TV off by using the power button on the TV's
remote, the system turns off simultaneously.

HDMI CONTROL is a mutual control function standard used by HDMI CEC (Consumer Electronics
Control) for HDMI (high-definition multimedia interface).
The HDMI CONTROL function will not operate in the following cases:
• When you connect this system to a component which is not correspond with Sony's HDMI
CONTROL function.
• When you connect the control unit and components using other than the HDMI connection.
We recommend that you connect this system to products featuring ‘BRAVIA’ Theatre Sync.
Note
• Depending on the connected component, the HDMI CONTROL function may not work. See the operating
instructions of the component.
39GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Preparing for the HDMI CONTROL function
To use the HDMI CONTROL function, set up the system and the TV.
Before you use the HDMI CONTROL function, be sure you have performed the following procedures.
1 Make sure that the control unit is connected to the TV (compatible with HDMI CONTROL
function) via the HDMI connection.
2 Turn on the system and the TV.
3 Switch the input selector on the TV so that the signal from the system appears on the
TV screen.
4
Set the respective HDMI CONTROL function for this system and the TV.
For details on this system, see “Setting [HDMI CONTROL] function” below. For details on the
setting up TV, see the operating instructions of the TV. Depending on the TV, the default setting
of the HDMI CONTROL function may be off.
Setting [HDMI CONTROL] function
X/x,
DISPLAY
1 Press DISPLAY when the system is in stop mode.

The Control Menu display appears on the TV screen.
40GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
2 Press X/x to select [SETUP], then press .

12(27)
18(34) DVD VIDEO
T 0:00:02
QUICK
QUICK
CUSTOM
RESET
BNR
3 Press X/x to select [CUSTOM], then press .

The Setup Display appears.

LANGUAGE SETUP
OSD: ENGLISH
MENU: ENGLISH
AUDIO: ORIGINAL
SUBTITLE: AUDIO FOLLOW
4 Press X/x to select [CUSTOM SETUP], then press .

The Setup item is selected.
CUSTOM SETUP
HDMI CONTROL: OFF
STB SYNCHRO: OFF
DIGITAL IN: TV OPT, SAT/CABLE COAX
PAUSE MODE: AUTO
TRACK SELECTION: OFF
MULTI-DISC RESUME: ON
AUDIO DRC: OFF
AUDIO (HDMI): OFF
DivX: Registration Code
5 Press X/x to select [HDMI CONTROL], then press .

6 Press X/x to select [ON].
• [ON]: sets the [HDMI CONTROL] function to on.
• [OFF]: sets the [HDMI CONTROL] function to off.
7 Press .
Note
• If [Please verify the HDMI connection.] appears in Step 6, check that this system and the TV are connected
properly.
41GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Watching DVD by a Single Button Press

(One-Touch Play)
Simply pressing by H (one-touch) on the remote, the system and the components with the HDMI
connections turn on simultaneously, and then DVD playback starts automatically.
Check the HDMI connections of the respective component and make sure [HDMI CONTROL] is set
to [ON] (page 40).
Press H on the remote.

The system and the components with the HDMI connections turn on simultaneously, and DVD
playback starts automatically.
This system and the TV operate as follows:
This system TV
Turns on. Turns on.
r r
Switches to “DVD” function. Switches to HDMI input.
r r
Plays back a DVD and outputs the sound. Minimizes sound level.
Note
• When the “DMPORT” function is active, One-Touch Play will not work.
• Depending on the TV, the start of the content may not be output.
42GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Enjoying the TV Sound from the Speakers in this System

(System Audio Control)
You can enjoy the TV sound from the speakers of this system by a simple operation.
To use System Audio Control, connect the control unit and the TV with an audio cord (not supplied)
(A) and an HDMI cable (not supplied) (B).
: Audio signal flow TV
AUDIO
OUT
A L
R IN

IN
DMPORT
B
Depending on the TV setting, the system turns on and switches to “TV” function automatically while
you are watching the TV. TV sound is output from the system speakers, and the volume of the TV
speakers is minimized simultaneously.
You can use System Audio Control as follows:

• When you turn on this system while watching the TV, TV sound is output from the system speakers automatically.
• You can adjust the system volume using the TV volume.
• If you turn off the system, the sound will be output from the TV speakers.
You can also operate System Audio Control from the TV menu. For details, see the operating
instructions of the TV.
Note
• When the TV is turned on before turning on the system, the TV sound will not output for a moment.
• When you select the TV program (the active picture is highlighted) or return to the TV mode while watching the
TV and a DVD by PAP (picture and picture) mode, the DVD playback will stop.
• To output the sound from the TV, set [AUDIO (HDMI)] to [ON] on the system (page 94).
43GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Turning off the System with the TV

(System Power Off)
When you turn off the TV using the power button on the TV’s remote, this system also turns off
automatically.
To use System Power Off, connect the control unit and the TV with an HDMI cable (not supplied) and
an audio cord (not supplied). See page 43.
When you turn off the system by pressing "/1 on the remote of the system or on the control unit, the
TV will not turn off.
Note
• Before using the System Power Off function, the TV function to link a power supply should be on. For details, see
the operating instructions of the TV.
• Depending on the status, the system may not be turned off.
44GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Enjoying STB (Set Top Box) Digital Sound or Digital

Satellite Receiver Sound from the System
(STB SYNCHRO)
You can enjoy digital sound and images of STB or a digital satellite receiver. Sound is output from the
speakers of this system. Images of STB or a digital satellite receiver are output from the TV by the
HDMI connection (HDMI 1 shown below). Follow the connections and settings.
Connecting the system

Connect the STB to the HDMI input jack of the TV with an HDMI cable (not supplied) (make sure to

connect from the smallest number).
By connecting as the following illustration, you can enjoy Multi Channel Broadcasted Audio from the
speakers of this system.
Note
• To enjoy STB sound, the TV must be equipped with 2 HDMI input jacks.
• The names of HDMI inputs in the following illustration are examples.
: Video signal flow

: Audio signal flow
TV
To HDMI 2 (HDMI cable) To HDMI 1 (HDMI cable)
DMPORT
STB
C
Digital coaxial cord or
digital optical cord
Setting [STB SYNCHRO]

1 Press "/1.
2 Press DISPLAY when the system is in stop mode.
3 Press X/x to select [SETUP], then press .
4 Press X/x to select [CUSTOM], then press .
5 Press X/x to select [CUSTOM SETUP], then press .
Note
• In order to set the [STB SYNCHRO] function, first set [HDMI CONTROL] to [ON] (page 40).
continued
45GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
6 Press X/x to select [STB SYNCHRO], then press .

7 Press X/x to select [ON].
• [ON]: sets the [STB SYNCHRO] function to on.
• [OFF]: sets the [STB SYNCHRO] function to off.
8 Press .
[DIGITAL IN] setting is selected automatically.
CUSTOM SETUP
HDMI CONTROL: ON
STB SYNCHRO: ON
DIGITAL IN: TV OPT, SAT/CABLE COAX
PAUSE MODE:TV OPT, SAT/CABLE COAX
TV COAX, SAT/CABLE OPT
TRACK SELECTION:
AUDIO DRC: OFF

AUDIO (HDMI): OFF
9 Press X/x to select a setting depending on the coaxial or optical cord (C).
• [TV t OPT, SAT/CABLE t COAX]: Optical audio input signals are assigned to “TV”
function, coaxial audio input signals are assigned to “SAT/CABLE” function.
• [TV t COAX, SAT/CABLE t OPT]: Coaxial audio input signals are assigned to “TV”
function, optical audio input signals are assigned to “SAT/CABLE” function.
10 Press .
Tip
• You can operate this function on STB or a digital satellite receiver which is not compatible with HDMI CONTROL
function.
Note
• Depending on the TV, this function may not work when STB or a digital satellite receiver is connected to the HDMI
1 jack of the TV.
Enjoying digital sound

Select the HDMI input of your TV connected to the STB or digital satellite receiver (HDMI 1
shown above).
The system accepts the signal from the SAT/CABLE (DIGITAL IN COAXIAL or OPTICAL) jack
automatically and outputs the sound of the STB or digital satellite receiver from the speakers of the
system.
46GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb09pla.fm]
masterpage:Right
specdef v20060111
Playback direction
Various Functions for Playing Discs × 2B t 1M t 2M t 3M
Searching for a Particular 3M (DVD VIDEO/DVD-VR mode/DivX video/

VIDEO CD only)
Point on a Disc × 2B (DVD VIDEO/CD only)
(Scan, Slow-motion Play, Freeze Opposite direction

Frame)
× 2b t 1m t 2m t 3m
3m (DVD VIDEO/DVD-VR mode/DivX video/

VIDEO CD only)
You can quickly locate a particular point on a × 2b (DVD VIDEO only)
disc by monitoring the picture or playing back
slowly. With each press, playback speed becomes faster.
Various Functions for Playing Discs

Watching frame by frame
(Slow-motion Play)
(DVD VIDEO, DVD-R, DVD-RW, DivX
video, VIDEO CD only)
Press /m or M/ when the system is in

pause mode. To return to the normal playback
speed, press H. Each time you press /m or
c/C M/ during Slow-motion Play, the playback
STEP
H speed changes. Two speeds are available. With
each press the indication changes as follows:
m/M
/
Playback direction
2 y1
Opposite direction (DVD VIDEO/DVD-R/
DVD-RW only)
Note 2 y1
• Depending on the DVD/DivX video/VIDEO CD, you
may not be able to do some of the operations
described. Playing one frame at a time
(Freeze Frame)
Locating a point quickly by (DVD VIDEO, DVD-R, DVD-RW, DivX
video, VIDEO CD only)
playing a disc in fast forward
or fast reverse (Scan) When the system is in the pause mode, press
(except for JPEG) STEP C ( ) to go to the next frame. Press
c STEP ( ) to go to the preceding frame
Press /m or M/ while playing a disc. (DVD VIDEO/DVD-R/DVD-RW only). To
When you find the point you want, press H to return to normal playback, press H.
return to normal speed. Each time you press /
Note
m or M/ during scan, the playback speed
• You cannot search for a still picture on a DVD-R/
changes. With each press the indication changes
DVD-RW in VR mode.
as shown below. Actual speeds may differ with
• For DATA CDs/DATA DVDs, this function works
some discs. only for DivX video files.
47GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
[ALBUM]
Searching for a Title/ [FILE]
Chapter/Track/Scene, Example: when you select
[CHAPTER]
etc. [** (**)] is selected (** refers to a number).
The number in parentheses indicates the
total number of titles, chapters, tracks,
indexes, scenes, albums or files.
You can search a DVD by title or chapter, and 12(27)

you can search a VIDEO CD/CD/DATA CD/ 18(34) DVD VIDEO
T 1:32:55
DATA DVD by track, index, or scene. As titles
and tracks are assigned unique numbers on the
disc, you can select the desired one by entering
its number. Or, you can search for a scene using
Selected row
the time code.
3 Press .
[** (**)] changes to [– – (**)].
Number
buttons 12(27)
CLEAR (34) DVD VIDEO
T 1:32:55
X/x,
DISPLAY
4 Press X/x or the number buttons to

select the title, chapter, track, index,
scene, etc., number you want to search
for.
1 Press DISPLAY. (When playing a If you make a mistake

DATA CD/DATA DVD with JPEG image Cancel the number by pressing CLEAR,
files, press DISPLAY twice.) then select another number.
The Control Menu display appears on the 5 Press .
TV screen.
The system starts playback from the
2 Press X/x to select the search method. selected number.
The display will show different items
To search for a scene using the
depending on the disc.
time code (DVD VIDEO and
[TITLE], [SCENE], [TRACK]
DVD-VR mode only)
[CHAPTER], [INDEX]
1 In Step 2, select [TIME/TEXT].
[TIME/TEXT] [T **:**:**] (playing time of the current title)
Select [TIME/TEXT] to search for a is selected.
starting point by inputting the time code. 2 Press .
[TRACK] [T **:**:**] changes to [T --:--:--].
48GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
3 Input the time code using the number

buttons, then press . Searching by Scene
For example, to find the scene at 2 hours, 10
minutes, and 20 seconds after the beginning, (Picture Navigation)
just enter “21020.”
Tip You can divide the screen into 9 subscreens and
• When the Control Menu display is turned off, you can
find the desired scene quickly.
search for a chapter (DVD VIDEO/DVD-R/DVD-
RW), track (VIDEO CD/CD), or file (DATA CD/
DATA DVD (DivX video)) by pressing the number
buttons and .
Note
• You cannot search for a scene on a DVD+RW using
the time code.
C/X/x/c,

PICTURE
NAVI
1 Press PICTURE NAVI during playback.

The following display appears on the TV
screen.
CHAPTER VIEWER ENTER
2 Press PICTURE NAVI repeatedly to

select an item.
• [TITLE VIEWER] (DVD VIDEO only)
• [CHAPTER VIEWER] (DVD VIDEO
only)
• [TRACK VIEWER] (VIDEO CD/
Super VCD only)
continued
49GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
3 Press .
The first scene of each title, chapter, or Resuming Playback from
track appears as follows.
the Point Where You
Stopped the Disc
1 2 3
(Resume Play)
4 5 6
7 8 9 When you stop the disc, the system remembers

the point where you pressed x and “Resume”
4 Press C/X/x/c to select a title, chapter, appears in the front panel display. As long as
or track, and press . you do not remove the disc, Resume Play will
The system starts playback from the work even if the system enters standby mode by
selected scene. pressing "/1.
To return to normal play during
setting "/1
Press O RETURN.
Note
• Depending on the disc, you may not be able to select
some items.
H
x
1 While playing a disc, press x to stop

playback.
“Resume” appears in the front panel
display.
If “Resume” does not appear, Resume Play
is not available.
2 Press H.
The system starts playback from the point
where you stopped the disc in Step 1.
50GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
To enjoy a disc that is played

before by resume playback Creating Your Own
(Multi-disc Resume)
Program
(DVD VIDEO, VIDEO CD only)
(Program Play)
This system recalls the point where you stopped
the disc the last time it was played and resumes
playback from that point the next time you insert
You can play the contents of a disc in the order
the same disc. When the resume playback
you want by arranging the order of the tracks on
memory is full, the resume playback point for
the disc to create your own program. You can
the first disc is deleted.
program up to 99 tracks.
To activate this function, set [MULTI-DISC
RESUME] in [CUSTOM SETUP] to [ON]. For
details, see “[MULTI-DISC RESUME] (DVD
VIDEO/VIDEO CD only)” (page 94).
Tip

• This system can store at least 10 resume playback
points.
• To play from the beginning of the disc, press x twice,
then press H. X/x/c,
Note
DISPLAY
• If [MULTI-DISC RESUME] in [CUSTOM SETUP]
is set to [OFF] (page 94), the resume point is cleared H
when you change the function by pressing
FUNCTION.
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
• The point where you stopped playing may be cleared
when: 1 Press DISPLAY.
– you eject the disc. The Control Menu display appears on the
– the system enters standby mode (DATA CD/ TV screen.
DATA DVD only).
– you change or reset the settings on the Setup
2 Press X/x to select
[PROGRAM], then press .
Display.
– you change the function by pressing FUNCTION. The options for [PROGRAM] appear.
– you disconnect the AC power cord (mains lead).
– you change the parental control level. 6 (14) PLAY
T 2:50 CD
• For DVD-Rs/DVD-RWs in VR mode, VIDEO CDs,
OFF
CDs, DATA CDs, and DATA DVDs, the system OFF
remembers the resume playback point for the current SET
disc. ON
• Resume Play does not work during Program Play and

Shuffle Play.
• This function may not work properly with some
discs.
continued
51GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
3 Press X/x to select [SET t], then 7 Press H to start Program Play.
press . Program Play starts.
When the program ends, you can restart the
[TRACK] is displayed when you play a same program again by pressing H.
VIDEO CD or CD.
PROGRAM 0:00:00
To return to normal play
T
ALL CLEAR In Step 3, press CLEAR or select [OFF]. To play
1. TRACK ––
2. TRACK – – 01
the same program again, select [ON] in Step 3
3. TRACK – – 02 and press .
4. TRACK – – 03
5. TRACK – – 04
6. TRACK – – 05 To turn off the Control Menu
7. TRACK – – 06 display
Tracks recorded Total time of Press DISPLAY repeatedly until the Control
on a disc programmed tracks Menu display is turned off.
To change or cancel a program

4 Press c.
The cursor moves to the track row [T] (in 1 Follow steps 1 to 3 of “Creating Your Own
this case, [01]). Program.”
2 Select the program number of the track you
PROGRAM 0:00:00 want to change or cancel using X/x.
T
ALL CLEAR If you want to delete the track from the
1. TRACK – – ––
2. TRACK – – 01 program, press CLEAR.
3. TRACK – – 02
4. TRACK – – 03 3 Follow Step 5 for new programming. To
5. TRACK – – 04 cancel a program, select [--] under [T], then
6. TRACK – – 05
7. TRACK – – 06 press .
To cancel all of the tracks in the

5 Select the track you want to program. programmed order
For example, select track [02].
1 Follow steps 1 to 3 of “Creating Your Own
Press X/x to select [02] under [T], then Program.”
press .
2 Press X and select [ALL CLEAR].
Selected track 3 Press .
PROGRAM 0:15:30
T
ALL CLEAR
1. TRACK 02 ––
2. TRACK –– 01
3. TRACK –– 02
4. TRACK –– 03
5. TRACK –– 04
6. TRACK –– 05
7. TRACK –– 06
Total time of the programmed tracks
6 To program other tracks, repeat steps 4

to 5.
The programmed tracks are displayed in the
selected order.
52GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
3 Press X/x to select the item to be

Playing in Random Order shuffled.
x When playing a VIDEO CD or CD
(Shuffle Play)
• [TRACK]: shuffles tracks on the disc.
x When Program Play is activated
You can have the system “shuffle” tracks. • [ON]: shuffles tracks selected in Program
Subsequent “shuffling” may produce a different Play.
playing order. x When playing a DATA CD (except for
DivX) or DATA DVD (except for DivX)
• [ON (MP3)]: shuffles MP3 audio tracks in
the album on the current disc. When no
album is selected, the first album will play
in random order.
Note
• A track already played is also selected in

random order.
X/x,
4 Press .
DISPLAY
Shuffle Play starts.

In Step 3, press CLEAR or select [OFF].
To turn off the Control Menu

display
Note Press DISPLAY repeatedly until the Control
• Same song may be played repeatedly during MP3 Menu display is turned off.
playback.
Note
1 Press DISPLAY during playback. • You cannot use this function with VIDEO CDs and
Super VCDs with PBC playback.
The Control Menu display appears on the
TV screen.
2 Press X/x to select [SHUFFLE],
then press .
The options for [SHUFFLE] appear.
6 (14) PLAY
T 2:50 CD
OFF
OFF
TRACK
53GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
3 Press X/x to select the item to be

Playing Repeatedly repeated.
(Repeat Play)
x When playing a DVD VIDEO or DVD-
VR
• [OFF]: does not play repeatedly.
• [DISC]: repeats all of the titles on the disc.
You can play all the titles, tracks or albums on a • [TITLE]: repeats the current title on a
disc or a single title, chapter, track, or album disc.
repeatedly.
• [CHAPTER]: repeats the current chapter.
You can use a combination of Shuffle or
Program Play modes. x When playing a VIDEO CD or CD
• [DISC]: repeats all of the tracks on the
disc.
• [TRACK]: repeats the current track.
x When playing a DATA CD or DATA
DVD
• [DISC]: repeats all of the albums on the
X/x,
disc.
DISPLAY • [ALBUM]: repeats the current album.
• [TRACK] (MP3 audio tracks only):
REPEAT
repeats the current track.
• [FILE] (DivX video files only): repeats
the current file.
4 Press .
The item is selected.
1 Press DISPLAY during playback.
TV screen. In Step 3, press CLEAR or select [OFF].
2 Press X/x to select [REPEAT], To turn off the Control Menu
then press . display
The options for [REPEAT] appear. Press DISPLAY repeatedly until the Control
Menu display is turned off.
6 (14) PLAY
T 2:50 CD
Note
• You can quickly display the [REPEAT] status.
OFF Press REPEAT on the remote.
OFF • You cannot use this function with VIDEO CDs and
DISC
TRACK Super VCDs with PBC playback.
• When playing a DATA CD/DATA DVD which
contains MP3 audio track and JPEG image files, and
their playing time are not the same, the audio sound
will not match the image.
• When [MODE (MP3, JPEG)] is set to [IMAGE
(JPEG)] (page 66), you cannot select [TRACK].
54GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Using the DVD’s Menu Changing the Sound
A DVD is divided into a lot of sections, which

make up a picture or music feature. These When playing a DVD VIDEO or DATA CD/
sections are called “titles.” When you play a DATA DVD (DivX video files) recorded in
DVD which contains several titles, you can multiple audio formats (PCM, Dolby Digital,
select the title you want using DVD TOP MPEG audio, or DTS), you can change the
MENU. audio format. If the DVD VIDEO is recorded
When you play DVDs that allow you to select with multilingual tracks, you can also change the
items such as the language for the subtitles and language.
the language for the sound, select these items With VIDEO CDs, CDs, DATA CDs, or DATA
using DVD MENU. DVDs, you can select the sound from the right or
left channel and listen to the sound of the
selected channel through both the right and left

speakers.
Number
buttons
DVD
TOP MENU DVD MENU
C/X/x/c,
1 Press DVD TOP MENU or DVD MENU. AUDIO
The disc’s menu appears on the TV screen.

The contents of the menu vary from disc to With the cover opened.
disc.
2 Press C/X/x/c or the number buttons to
1 Press AUDIO during playback.
select the item you want to play or The following display appears on the TV
change. screen.
3 Press .
1:ENGLISH DOLBY DIGITAL 3/2.1
2 Press AUDIO repeatedly to select the

desired audio signal.
continued
55GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
x When playing a DVD VIDEO x When playing a Super VCD

Depending on the DVD VIDEO, the choice The default setting is underlined.
of language varies. • [1:STEREO]: the stereo sound of the
When four digits are displayed, they audio track 1
indicate a language code. Refer to • [1:1/L]: the sound of the left channel of
“Language Code List” (page 108) to see the audio track 1 (monaural)
which language the code represents. When • [1:2/R]: the sound of the right channel of
the same language is displayed two or more the audio track 1 (monaural)
times, the DVD VIDEO is recorded in • [2:STEREO]: the stereo sound of the
multiple audio formats. audio track 2
x When playing a DVD-VR • [2:1/L]: the sound of the left channel of
The types of sound tracks recorded on a disc the audio track 2 (monaural)
are displayed. The default setting is • [2:2/R]: the sound of the right channel of
underlined. the audio track 2 (monaural)
Example:
Note
• [1: MAIN] (main sound) • While playing a Super VCD on which the audio track
• [1: SUB] (sub sound) 2 is not recorded, no sound will come out if you select
• [1: MAIN+SUB] (main and sub sound) [2:STEREO], [2:1/L], or [2:2/R].
• [2: MAIN]
• [2: SUB] Checking the audio signal
• [2: MAIN+SUB] format
Note (DVD, DivX video only)
• [2: MAIN], [2: SUB], and [2: MAIN+SUB] do
not appear when one audio stream is recorded on If you press AUDIO repeatedly during
the disc. playback, the format of the current audio signal
(PCM, Dolby Digital, DTS, etc.) appears on the
x When playing a VIDEO CD, CD, DATA
TV screen as shown below.
CD (MP3 audio), or DATA DVD (MP3
audio) x When playing a DVD
Example:
• [STEREO]: the standard stereo sound
• [1/L]: the sound of the left channel Dolby Digital 5.1 ch
(monaural) LFE (Low
• [2/R]: the sound of the right channel Surround (L/R) Frequency Effect)
(monaural)
x When playing a DATA CD (DivX 1:ENGLISH DOLBY DIGITAL 3 / 2 .1
video) or DATA DVD (DivX video)
L C R
The choice of DATA CD or DATA DVD Front (L/R) +
Center LFE
audio signal formats differ, depending on
LS RS
the DivX video file contained on the disc.
The format is shown in the display. Currently playing
program format
56GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Example:
Dolby Digital 3 ch Selecting [ORIGINAL] or
Surround [PLAY LIST] on a DVD-R/
Front (L/R) (Monaural)
DVD-RW
2:SPANISH DOLBY DIGITAL 2 / 1
L R
Some DVD-Rs/DVD-RWs in VR (Video
S
Recording) mode have two types of titles for
playback: originally recorded titles
Currently playing ([ORIGINAL]) and titles that can be created on
program format
recordable DVD players for editing ([PLAY
LIST]). You can select the type of title to be
x When playing a DATA CD (DivX video) or
played.
DATA DVD (DivX video)
Example:

MP3 audio
1: MP3 128k
Bit rate
X/x,
About audio signals DISPLAY

Audio signals recorded in a disc contain the
sound elements (channels) shown below. Each
channel is output from a separate speaker.
• Front (L)
• Front (R)
• Center
• Surround (L) 1 Press DISPLAY when the system is
• Surround (R) in stop mode.
• Surround (Monaural): This signal can be either The Control Menu display appears on the
Dolby Surround Sound processed signals or TV screen.
Dolby Digital sound’s monaural Surround
audio signals.
2 Press X/x to select [ORIGINAL/
PLAY LIST], then press .
• LFE (Low Frequency Effect) signal
The options for [ORIGINAL/PLAY LIST]
appear.
1 (44)
3 ( 28) DVD-VR
T 1:30:50
PLAY LIST
PLAY LIST
ORIGINAL
continued
57GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111

The default setting is underlined. Viewing Information About
• [PLAY LIST]: plays the titles created
from [ORIGINAL] for editing.
the Disc
• [ORIGINAL]: plays the titles originally
recorded.
4 Press .
DISPLAY
DISPLAY
Viewing the playing time and

remaining time in the front
panel display
You can check disc information, such as the
remaining time, total number of titles in a DVD,
tracks in a VIDEO CD, CD, MP3, or file name
of a DivX video using the front panel display
(page 111).
Press DISPLAY.
Each time you press DISPLAY while playing
the disc, the front panel display changes
1 t 2 t 3 t ... t 1 t ...
Some displayed items may disappear after a few
seconds.
When playing a DVD VIDEO or

DVD-R/DVD-RW
1 Playing time and number of the current title
2 Remaining time and number of the current
title
3 Playing time and number of the current
chapter
58GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
4 Remaining time and number of the current 1 Press DISPLAY during playback.
chapter The following display appears on the TV
5 Disc name screen.
6 Title and chapter
When playing a DATA CD (DivX T 1:01:57
video) or DATA DVD (DivX video)

Time information
1 Playing time of the current file
2 Current file name
3 Current album and file number 2 Press DISPLAY repeatedly to change
the time information.
When playing a VIDEO CD
The display and the kinds of time that you
(without PBC functions) or CD can check depend on the disc you are
1 Playing time and number of the current track playing.
2 Remaining time and number of the current
x When playing a DVD VIDEO or DVD-
track
RW
3 Playing time of the disc

• T **:**:**
4 Remaining time of the disc
Playing time of the current title
5 Disc name
• T–**:**:**
6 Track and index*
* VIDEO CD only.
Remaining time of the current title
• C **:**:**
When playing a DATA CD (MP3 Playing time of the current chapter
audio) or DATA DVD (MP3 audio) • C–**:**:**
1 Playing time and number of the current track Remaining time of the current chapter
2 Track (file) name x When playing a VIDEO CD (with PBC
Tip
functions)
• When playing VIDEO CDs with PBC functions, the • **:**
playing time is displayed in the front panel display. Playing time of the current scene
Note x When playing a VIDEO CD (without
• The system can only display the first level of the PBC functions) or CD
DVD/CD text, such as the disc name or title. • T **:**
• If an MP3 file name cannot be displayed, “*” will Playing time of the current track
appear in the front panel display instead. • T–**:**
• The disc name or track name may not be displayed Remaining time of the current track
depending on the text.
• D **:**
• Playing time of MP3 audio tracks and DivX video
Playing time of the current disc
files may not be displayed correctly.
• D–**:**
Remaining time of the current disc
Checking the playing time and
x When playing a DATA CD (MP3
remaining time on the TV audio) or DATA DVD (MP3 audio)
screen • T **:**
Playing time of the current track
You can check the playing time and remaining
time of the current title, chapter, or track, and the x When playing a DATA CD (DivX
total playing time or remaining time of the disc. video) or DATA DVD (DivX video)
You can also check the DVD text and MP3 • **:**:**
folder name/file name recorded on the disc. Playing time of the current file
continued
59GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Note
• Characters/marks may not be displayed for some
Checking the date
languages. information
• Depending on the type of disc being played, the (JPEG only)
system can only display a limited number of
characters. Also, depending on the disc, not all text You can check the date information during
characters will be displayed. playback when the Exif* tag is recorded in JPEG
image data.
Checking the play information Press DISPLAY twice during playback.

of the disc The Control Menu display appears on the TV
screen.
To check DVD/CD text
Press DISPLAY repeatedly in Step 2 to display 1(8)
text recorded on the DVD/CD. 1(20) DATA CD JPEG
31/ 01/ 2007
The DVD/CD text appears on the TV screen
only when text is recorded in the disc. You Date information
cannot change the text. If the disc does not
contain text, “NO TEXT” appears.
* “Exchangeable Image File Format” is a digital

camera image format defined by the Japan
BRAHMS SYMPHONY Electronics and Information Technology Industries
Association (JEITA).
Tip
To check DATA CD/DATA DVD
• Date information is [DD/MM/YYYY].
(MP3 audio/DivX video) text DD: Day
By pressing DISPLAY while playing MP3 MM: Month
audio tracks or DivX video files on a DATA YYYY: Year
CD/DATA DVD, you can display the name of
the album/track/file, and the audio bit rate (the
amount of data per second of the current audio)
on your TV screen.
Bit rate*
T 17:30 128k
JAZZ
RIVER SIDE
Album name Track/file name
* Appears when:
– playing an MP3 audio track on DATA CDs/DATA
DVDs.
– playing a DivX video file that contains MP3 audio
signals on DATA CDs/DATA DVDs.
60GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Changing the Angles Displaying the Subtitles
If various angles (multi-angles) for a scene are If subtitles are recorded on a disc, you can turn
recorded on a DVD VIDEO, you can change the the subtitles on or off while playing. If
viewing angle. multilingual subtitles are recorded on the disc,
you can change the subtitle language while
playing, or turn the subtitles on or off whenever
you want.

ANGLE
With the cover opened. SUBTITLE
Press ANGLE during playback.

Each time you press ANGLE, the angle changes. With the cover opened.
Note
Press SUBTITLE during playback.
• Depending on the DVD VIDEO, you may not be able
to change the angle even if multi-angles are recorded Each time you press SUBTITLE, the subtitle
on the DVD VIDEO. language changes.
Note
• Depending on the DVD VIDEO, you may not be able
to change the subtitles even if multilingual subtitles
are recorded on it. You also may not be able to turn
them off.
• You can change the subtitles if the DivX video file
has an “.AVI” or “.DIVX” extension and contains
subtitle information within the same file.
61GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Adjusting the Delay About MP3 Audio Tracks

Between the Picture and and JPEG Image Files
Sound
(A/V SYNC)
What is MP3/JPEG?
When the sound does not match the pictures on MP3 is audio compression technology that
the TV screen, you can adjust the delay between satisfies the ISO/MPEG regulations. JPEG is
the picture and sound. image compression technology.
Discs that the system can

play
You can play back DATA CDs (CD-ROMs/CD-
Rs/CD-RWs) or DATA DVDs (DVD-Rs/DVD-
RWs/DVD+Rs/DVD+RWs/DVD-ROMs)
X/x/c,
recorded in MP3 (MPEG1 Audio Layer 3) or
JPEG format. However, the DATA CDs must be
recorded according to ISO 9660 Level 1, Level
2 or Joliet format and DATA DVDs of Universal
Disk Format (UDF) for the system to recognize
the tracks (or files). You can also play discs
recorded in Multi Session.
See the operating instructions supplied with the
SYSTEM
MENU CD-R/CD-RW or DVD-R/DVD-RW drives and
the recording software (not supplied) for details
on the recording format.
1 Press SYSTEM MENU. About Multi-Session disc
2 Press X/x repeatedly until “A/V SYNC” If MP3 audio tracks or JPEG image files are
appears in the front panel display, then recorded in the first session, the system will also
press or c. play MP3 audio tracks or JPEG image files in
3 Press X/x to select a setting. other sessions. If audio tracks and images in
The default setting is underlined. audio CD format or video CD format are
recorded in the first session, only the first
• “LONG”: adjusts the difference between
session will be played back.
picture and sound by 130 msec.
• “SHORT”: adjusts the difference between Note
picture and sound by 70 msec. • The system may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
• “OFF”: does not adjust.
format.
4 Press .
MP3 audio track or JPEG
5 Press SYSTEM MENU. image file that the system can
The system menu turns off. play
The system can play the MP3 audio tracks or
JPEG image files:
62GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
• that have the extension “.MP3” (MP3 audio When you insert a DATA CD or DATA DVD,
track) or “.JPG”/“.JPEG” (JPEG image file) the numbered tracks (or files) are played
• that conform to the DCF* image file format sequentially, from 1 through 7. Any sub-
* “Design rule for Camera File system”: Image albums/tracks (or files) contained within a
standards for digital cameras regulated by Japan currently selected album take priority over the
Electronics and Information Technology Industries next album in the same tree. (Example: C
Association (JEITA). contains D so 4 is played before 5.)
Note
• The system will play any data with the When you press DVD MENU and the list of
extension “.MP3,” “.JPG,” or “.JPEG” even if album names appears on the TV screen
they are not in MP3 or JPEG format. Playing (page 64), the album names are arranged in the
this data may generate a loud noise which following order:
could damage your speaker system. A t B t C t D t F t G. Albums
• The system does not conform to audio in that do not contain tracks (or files) (such as
MP3PRO format. album E) do not appear in the list.
Tip

• If you add numbers (01, 02, 03, etc.) to the front of the
Playback order of MP3 audio track (or file) names when you store the tracks (or
tracks or JPEG image files files) in a disc, the tracks (or files) will be played in
that order.
The playback order of MP3 audio tracks or
• A disc with many trees takes longer to start playback.
JPEG image files recorded on a DATA CD or
DATA DVD is as follows: Note
• Playback order may differ from the illustration
x Structure of disc contents depending on the software you use to create the
DATA CD or DATA DVD, or if there are more than
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5
200 albums and 300 tracks (or files) in each album.
ROOT • The system can recognize up to 200 albums, and will
not play any albums beyond the 200th.
• The system may take longer time to playback when
progressing to the following album or jump to other
album.
• Some types of JPEG files cannot be played.
Album Track (MP3 audio) or

File (JPEG image)
63GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
3 Press X/x to select an album.

Playing DATA CDs or x When selecting an album
Press H to start playing the selected
DATA DVDs with MP3 album.
Audio Tracks and JPEG x When selecting a track
Press .
Image Files A list of tracks contained in the album
appears.
MY FAVOURITE SONG
1(256)
ALL BLUES
AUTUMN LEAVES
MILES TONES
MY FUNNY VALENTINE
MY ROMANCE
S O M E D A Y M Y P R I N C E W ...
WALTZ FOR DEBBY
DVD MENU
C/X/x/c, Press X/x to select a track and press .
The selected track starts playing. You can
turn the track list off by pressing DVD
H MENU. Pressing DVD MENU again will
display the album list.
To stop playback
PICTURE
NAVI
Press x.
To play the next or previous MP3

audio track
Press ./>. Note that you can select the
Selecting an MP3 audio track next album by continuing to press > after the
or album last track on the current album, but that you
cannot return to the previous album by pressing
1 Load a DATA CD or DATA DVD. .. To return to a previous album, select the
2 Press DVD MENU. album from the album list.
The albums recorded on the DATA CD or To return to the previous display
DATA DVD appear on the TV screen.
Press O RETURN.
When an album is being played, its title is
shaded. To turn off the display
Press DVD MENU.
3( 30)
BOSSA NOVA
CLASSIC
JAZZ
KARAOKE
MY FAVOURITE SONG
R&B
ROCK BEST HIT
SALSA OF CUBA
64GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
To play the next or previous JPEG

Selecting a JPEG image file or image file
album
Press C/c when the Control Menu display is not
1 Load a DATA CD or DATA DVD. displayed on the TV screen. Note that you can
2 Press DVD MENU.
select the next album by continuing to press c
after the last image on the current album, but that
The albums recorded on the DATA CD or
you cannot return to the previous album by
DATA DVD appear on the TV screen.
pressing C. To return to the previous album,
When an album is being played, its title is
select the album from the album list.
shaded.
To rotate a JPEG image
3( 30) When a JPEG image file is displayed on the TV
BOSSA NOVA
screen, you can rotate the image by 90 degrees.
CLASSIC Press X/x while viewing an image. Each time
JAZZ
KARAOKE you press X, the image rotates counterclockwise
MY FAVOURITE SONG by 90 degrees.
R&B

ROCK BEST HIT Example of when you press X once:
SALSA OF CUBA
Rotating direction
3 Press X/x to select an album.

x When selecting an album
Press H to start playing the selected
album.
x When selecting an image
Press PICTURE NAVI.
Images of files in the album appear in 16
subscreens.
Press CLEAR to return to normal view.
1 2 3 4 To stop playback
Press x.
5 6 7 8
Tip
9 10 11 12 • A scroll box is displayed at the right side of the TV

screen. To display the additional image files, select
the bottom image and press x. To return to the
13 14 15 16
previous image, select the top image and press X.
Press C/X/x/c to select the image you want
to view and press .
65GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111

Playing Audio Tracks and The default setting is underlined.
• [AUTO]: plays both the JPEG image files
Images as a Slide Show and MP3 audio tracks in the same album
with Sound as a slide show.
• [AUDIO (MP3)]: plays only MP3 audio
tracks continuously.
• [IMAGE (JPEG)]: plays only JPEG
You can play a slide show with sound by first image files as a slide show.
placing both MP3 and JPEG files in the same
album on a DATA CD or DATA DVD. When
6 Press .
you play back the DATA CD or DATA DVD, 7 Press DVD MENU.
select [AUTO] mode as explained below. The list of albums recorded on the DATA
CD or DATA DVD appears.
8 Press X/x to select the album you want
and press H.
The system starts playing the selected
album.
You can turn the album list on and off by
pressing DVD MENU repeatedly.
DVD MENU
X/x, Tip
• When you select [AUTO], the system can recognize
DISPLAY up to 300 MP3 tracks and 300 JPEG files in a single
H
x
album. When you select [AUDIO (MP3)] or [IMAGE
(JPEG)], the system can recognize up to 600 MP3 and
600 JPEG files in a single album. A maximum of 200
albums can be recognized regardless of the selected
mode.
Note
• If you set [MODE (MP3, JPEG)] to [IMAGE
1 Load a DATA CD or DATA DVD. (JPEG)] on a disc that contains MP3 tracks only or
2 Press x. [AUDIO (MP3)] on a disc that contains JPEG files
only, you may not be able to change the [MODE
3 Press DISPLAY when the system is (MP3, JPEG)] setting.
in stop mode. • PICTURE NAVI does not work when [AUDIO
The Control Menu display appears on the (MP3)] is selected.
TV screen. • If you play large MP3 track data and JPEG image
data at the same time, the sound may skip. It is
4 Press X/x to select [MODE recommended that you set the MP3 bit rate to 128
(MP3, JPEG)], then press . kbps or lower when creating the file. If the sound still
The options for [MODE (MP3, JPEG)] skips, then reduce the size of the JPEG file.
appear.
12(27)
18(34) DATA CD MP3
T 2:55
AUTO
AUTO
AUDIO (MP3)
IMAGE (JPEG)
66GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Specifying the slide show Selecting an effect for image

duration files in the slide show
(JPEG only) (JPEG only)
When you play JPEG image files using slide When you play a JPEG image file, you can
show, you can specify the duration for slides to select the effect to be used when viewing the
appear on the screen. slide show.
1 Press DISPLAY twice. 1 Press DISPLAY twice.
The Control Menu display for JPEG The Control Menu display appears on the
appears on the TV screen. TV screen.
2 Press X/x to select 2 Press X/x to select [EFFECT],
[INTERVAL], then press . then press .
The options for [INTERVAL] appear. The options for [EFFECT] appear.
3 ( 12) 3 ( 12)

1( 4) DATA CD JPEG 1( 4) DATA CD JPEG
29/10/2007 23/10/2007
NORMAL
NORMAL MODE1
FAST MODE1
SLOW1 MODE2
SLOW2 MODE3
MODE4
MODE5
OFF

• [NORMAL]: sets the duration to about 6 The default setting is underlined.

to 9 seconds. • [MODE1]: The image sweeps in from top
• [FAST]: sets the duration shorter than to bottom.
[NORMAL]. • [MODE2]: The image stretches out from
• [SLOW1]: sets the duration longer than left to right of the screen.
[NORMAL]. • [MODE3]: The image stretches out from
• [SLOW2]: sets the duration longer than the center of the screen.
[SLOW1]. • [MODE4]: The images randomly cycle
through the effects.
4 Press . • [MODE5]: The next image slides over the
Note previous image.
• Some JPEG files may take longer to display than • [OFF]: Turns off this function.
others, which may make the duration seems longer
than the option you selected. Especially progressive 4 Press .
JPEG files or JPEG files of 3,000,000 pixels or more.
67GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
About playback order of data on

Enjoying DivX® Videos DATA CDs or DATA DVDs
See “Playback order of MP3 audio tracks or
JPEG image files” (page 63). Note that the
playback order may not be applicable,
depending on the software used for creating the
DivX video file, or if there are more than 200
albums and 600 DivX video files in each album.
Note
• The system may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format.
DVD MENU
X/x, DivX video files that the system
can play
H
The system can play data that is recorded in
DivX format, and which has the extension
“.AVI,” or “.DIVX.” The system will not play
files with the extension “.AVI” or “.DIVX” if
they do not contain a DivX video.
Tip
• For details about playable MP3 audio tracks or JPEG
image files on DATA CDs or DATA DVDs, see
About DivX Video Files “Discs that the system can play” (page 62).
DivX® is a video file compression technology, Note

developed by DivX, Inc. This product is an • The system may not play a DivX video file when the
official DivX® Certified product. file has been combined from two or more DivX video
You can play DATA CDs and DATA DVDs that files.
contain DivX® video files. • The system cannot play a DivX video file of size
more than 720 (width) × 576 (height) or 2GB.
DATA CDs and DATA DVDs that • Depending on the DivX video file, sound may skip or
the system can play not match the pictures on the TV screen.
• The system cannot play some DivX video files that
Playback of DATA CDs (CD-ROMs/CD-Rs/ are longer than 3 hours.
CD-RWs) and DATA DVDs (DVD-ROMs/ • Depending on the DivX video file, the picture may
DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs) on pause or be unclear. In which case, it is recommended
this system is subject to certain conditions: that you create the file at a lower bit rate. If the sound
– With DATA CDs/DATA DVDs that contain is still noisy, MP3 is the recommended audio format.
DivX video files in addition to MP3 audio Note, however, this system does not conform to
tracks or JPEG image files, the system plays WMA (Windows Media Audio) format.
only the DivX video files. • Because of the compression technology used for
DivX video files, it may take some time after you
However, this system only plays DATA CDs
press H for the picture to appear.
whose logical format is ISO 9660 Level 1/Level
2 or Joliet, and DATA DVDs of Universal Disk
Format (UDF).
Refer to the operating instructions supplied with
the disc drives and the recording software (not
supplied) for details on the recording format.
68GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Selecting an album To go to the next or previous

1 Press DVD MENU.
page
A list of albums on the disc appears. Only Press C/c.
albums that contain DivX video files are To return to the previous display
listed.
Press O RETURN.
3( 3) To stop playback
MY FAVOURITES Press x.
NEW YEAR'S DAY
SUMMER 2003 To play the next or previous DivX
video file without turning on the
above file list
You can select the next or previous DivX video
2 Press X/x to select the album you want file in the same album by pressing ./>.
You can also select the first file of the next
to play.

album by pressing > during playback of the
3 Press H. last file of the current album. Note that you
The system starts playing the selected cannot return to the previous album by pressing
album. .. To return to the previous album, select it
To select DivX video files, see “Selecting a from the album list.
DivX video file” (page 69).
Tip
To go to the next or previous • If the number of viewing times is preset, you can play
the DivX video files as many times as the preset
page
number. The following occurrences are counted:
Press C/c. – when the system is turned off.
– when another file is played.
To turn off the display
– when you eject the disc.
Press DVD MENU repeatedly.
To stop playback
Press x.
Selecting a DivX video file

1 After Step 2 of “Selecting an album,”
press .
The list of files in the album appears.
MY FAVOURITES
1(2 )
HAWAII 2004
VENUS
2 Press X/x to select a file and press .

The selected file starts playing.
69GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Note
Playing VIDEO CDs with • Depending on the VIDEO CD, [Press ENTER] in
Step 3 may appear as [Press SELECT] in the
PBC Functions (Ver.2.0) operating instructions supplied with the disc. In this
case, press H.
(PBC Playback)
Tip
• To play without PBC, press ./> or the number
buttons while the system is in stop mode to select a
With PBC (Playback Control) functions, you track, then press H or . The system starts
can enjoy simple interactive operations, search continuous play. You cannot play still pictures such
functions, and other such operations. as a menu. To return to PBC playback, press x twice,
PBC playback allows you to play VIDEO CDs then press H.
interactively by following the menu on the TV
screen.
Number
buttons
1 Start playing a VIDEO CD with PBC

functions.
The menu for your selection appears on the
TV screen.
2 Select the item number you want with
the number buttons.
3 Press .
4 Follow the instructions in the menu for
interactive operations.
Refer to the operating instructions supplied
with the disc, as the operating procedure
may differ depending on the VIDEO CD.
To go back to the menu
Press O RETURN.
70GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb10rad.fm]
masterpage:Right
specdef v20060111
6 Press X/x to select the preset number

you want.
Tuner Functions
TUNED STEREO
Presetting Radio Stations

You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down Tip
the volume to minimum. • You can select the preset number directly by
pressing the number buttons.
7 Press .
The station is stored.
TUNED STEREO
FUNCTION
X/x,
8 Press TUNER MENU.
9 Repeat 1 to 8 to store other stations.
Tuner Functions
TUNING
–/+ To change the preset number
Restart from Step 3.
TUNER
MENU
1 Press FUNCTION repeatedly until “FM”

or “AM” appears in the front panel
display.
2 Press and hold TUNING + or – until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” and “STEREO” (for
stereo program) light up in the front panel
display.
3 Press TUNER MENU.
4 Press X/x repeatedly until “Memory?”
appears in the front panel display.
5 Press .
A preset number appears in the front panel
display.
TUNED STEREO
71GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
when the system receives the radio station. To

Listening to the Radio stop the automatic tuning manually, press
TUNING + or –.
Preset radio stations in the system’s memory
To listen to radio stations when
first (see “Presetting Radio Stations” (page 71)).
you know the frequencies
Use direct tuning in Step 2.
DISPLAY
1 Press DIRECT TUNING.
2 Press the number buttons to select the
frequency number you want to listen to. For
FUNCTION example, to input “98.00MHz,” press the
number buttons in the following order.
9t8t0t0
3 Press .
PRESET
–/+ If an FM program is noisy
VOLUME If an FM program is noisy, you can select
+/– monaural reception. There will be no stereo
effect, but reception will improve.
TUNER
MENU 1 Press TUNER MENU.
With the cover opened. 2 Press X/x repeatedly until “FM Mode?”
appears in the front panel display, then
1 Press FUNCTION repeatedly until “FM” press or c.
or “AM” appears in the front panel 3 Press X/x to select “MONO.”
display. The default setting is underlined.
The last received station is tuned in. • “STEREO”: stereo reception.
2 Press PRESET + or – repeatedly to

• “MONO”: monaural reception.
select the preset station. 4 Press .

Each time you press the button, the system The setting is made.
tunes in one preset station. 5 Press TUNER MENU.
Tip Tip
• You can select the preset number directly by • To improve reception, reorient the supplied antennas
pressing the number buttons. (aerials).
3 Adjust the volume by pressing

VOLUME +/–.
To turn off the radio

Press "/1 to turn off the system.
To change to another function, press
FUNCTION.
To listen to non-preset radio

stations
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or –
repeatedly.
For automatic tuning, press and hold TUNING +
or –. The automatic tuning stops automatically
72GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Naming preset stations Viewing the station name or

frequency in the front panel
You can enter a name for preset stations. These
names (for example, “XYZ”) appear in the front display
panel display when a station is selected. When the system is set to “FM” or “AM,” you
Note that no more than one name can be entered can check the frequency using the front panel
for each preset station. display.
Note
Press DISPLAY.
• You cannot enter a name for preset stations of the
Radio Data System (RDS) (page 74).
Each time you press DISPLAY, the front panel
display changes as shown.
1 Press FUNCTION repeatedly until “FM” 1 Station name*
or “AM” appears in the front panel 2 Frequency**
display. * This is displayed if you have entered a name for a
The last received station is tuned in. preset station.
2 Press PRESET + or – repeatedly to

** Returns to the original display when several seconds
have elapsed.
select the preset station you want to
create an index name for.
3
Tuner Functions
Press TUNER MENU.
4 Press X/x repeatedly until “Name In?”
TUNED STEREO
5 Press .
6 Create a name by using C/X/x/c.
Press X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station name.
If you make a mistake

Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
To erase the character, press C/c
repeatedly until the character to be erased
flashes, then press CLEAR.
7 Press .
“Complete!” appears in the front panel
display, and the station name is stored.
8 Press TUNER MENU.
Tip
• You can check the frequency in the front panel
display by pressing DISPLAY repeatedly (page 73).
73GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Using the Radio Data

System (RDS)
What is the Radio Data

System?
The Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features, such as station name display.
RDS is available only for FM stations.*
Note
• RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly,
or if the signal strength is weak.
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
Receiving RDS broadcasts

Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name* appears in the front
panel display.
* If an RDS broadcast is not received, a station name
will not appear in the front panel display.
Tip
• When a station name is displayed, you can check the
frequency by pressing DISPLAY repeatedly.
74GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb11oth.fm]
masterpage:Right
specdef v20060111
TV
Manufacturer Code number
Other Operations
SONY 501 (default), 502
Controlling the TV with the ADMIRAL 510, 535, 542
AIWA 501, 536, 539
Supplied Remote AKAI 503
AOC 503
By adjusting the remote signal, you can control
your TV with the supplied remote. BCLL&HOWELL 535, 542
BROKSONIC 503
TV mode
indicator CROSLEX 518
TV "/1
TV CURTIS-MATHES 503, 551, 566, 567
TV INPUT
DAEWOO 503, 504, 505, 506, 507, 515
Number DAYTRON 517
buttons EMERSON 503, 517
-
ENTER FISHER 508, 545
C/X/x/c, FUJITSU 528
TOOLS
FUNAI 548
RETURN TV MENU GENERAL 503, 509, 510
ELECTRIC
Other Operations
GOLDSTAR/LG 503, 512, 515, 517, 568, 576
VOLUME +/–
GRUNDIG 511, 533
TV CH +/–
HITACHI 503, 513, 514, 515, 517, 557
ITT/NOKIA 521, 522
J.C.PENNY 503, 510, 566
JVC 516, 552
Note
• When you replace the batteries of the remote, the KTV 503, 517
code number may reset itself to the default (SONY) LOEWE 515, 556
setting. Reset the appropriate code number. LXI (Sears) 503, 508, 510, 517, 518, 551
MAGNAVOX 503, 515, 517, 518, 566
Controlling TVs with the MARANTZ 527
remote MITSUBISHI/MGA 503, 519, 527, 566, 568
NEC 503, 520, 527, 554
Press and hold TV [/1 while entering your
PANASONIC 509, 524, 553, 572
TV’s manufacturer’s code (see the table)
using the number buttons. Then release TV PHILCO 503, 504, 514, 517, 518
[/1. PHILIPS 515, 518, 557
If you successfully set the manufacturer’s code, PIONEER 509, 525, 526, 551, 555
the TV mode indicator flashes twice slowly. If PORTLAND 503
the setting is unsuccessful, the TV mode QUASAR 509, 535
indicator flashes five times quickly.
RADIO SHACK 503, 510, 527, 565, 567
Code numbers of controllable TVs RCA/PROSCAN 503, 510, 523, 529
If more than one code number is listed, try SAMSUNG 503, 515, 517, 531, 532, 534,
entering them one at a time until you find the one 556, 557, 566, 569, 574
that works with your TV. SANYO 508, 545, 546, 567
SCOTT 503, 566
continued
75GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Manufacturer Code number To control the TV

SHARP 517, 535, 550, 565 You can control the TV by using following
SIGNATURE 535, 542, 550 buttons.
SYLVANIA 503, 518, 566
By pressing You can
TELEFUNKEN/ 530, 537, 538, 547, 549, 558
TV [/1 Turn the TV on or off.
SABA
TV INPUT Switch the TV’s input source
THOMSON 530, 537, 547, 549
between the TV and other input
TOSHIBA 535, 539, 540, 541, 551 sources.
VIDECH 503, 514 VOLUME +/–* Adjust the TV volume.
WARDS 503, 517, 566 TV CH +/– Select the TV channel.
ZENITH 542, 543, 567 Number Select the TV channel.
buttons*,
CATV ENTER*
Manufacturer Code number TOOLS* Displays the operation menu for
SONY 802, 821, 822, 823, 824, 825, the current display.
865 RETURN* Return to the previous display.
AMSTRAD 845, 846 TV MENU* Display the menu of the TV.
BSKYB 862 C/X/x/c*, * Select the item on the menu.
GRUNDIG 859, 860
HAMLIN/REGAL 836, 837, 838, 839, 840 * To use these buttons while in the TV mode (the TV
mode indicator lights up), press the TV button.
HUMAX 846, 847
- is for selecting a channel number greater than
JERROLD 830, 831 10. (For example, for channel 25, press -, then
JERROLD/GI 806, 807, 808, 809, 810, 811, 2 and 5.)
812, 813, 814
Note
MOTOROLA 807, 819
• Depending on the TV, you may not be able to control
NOKIA 851, 853, 854, 864 your TV or to use some of the buttons above.
OAK 841, 842, 843 • The TV mode turns off when you do not operate the
PACE 848, 849, 850, 852, 862, 863, remote for 10 seconds.
864
PANASONIC 816, 826, 833, 834, 835, 855
PHILIPS 830, 831, 856, 857, 858, 859,
860, 864
PIONEER 828, 829
SCIENTIFIC 815, 816, 817, 844
ATLANTA
THOMSON 830, 831, 857, 861, 864, 876
ZENITH 826, 827
76GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Enjoying Multiplex Enjoying the Sound at Low

Broadcast Sound Volume
(DUAL MONO) (NIGHT MODE)
You can enjoy multiplex broadcast sound when You can enjoy sound effects or dialog, as you
the system receive the Dolby Digital multiplex would in a movie theater, even at low volume. It
broadcast signal. is useful for watching movies at night.
Note
• To receive the Dolby Digital signal, you need to
connect a digital satellite receiver to the control unit
with an optical or coaxial digital cord (page 24) and
set the digital output mode of the digital satellite
receiver to Dolby Digital.
Other Operations
NIGHT
Press NIGHT.
“NIGHT” lights up in the front panel display and
AUDIO
the sound effect is activated.
Tip
With the cover opened. • To enjoy more effects, set [AUDIO DRC] to
[STANDARD] or [MAX] (page 94).
Press AUDIO.
Press AUDIO repeatedly until the signal you To turn off the sound effect
want appears in the front panel display. The Press NIGHT again.
default setting is underlined.
• “MAIN”: Sound of the main language will be
output.
• “SUB”: Sound of the sub language will be
output.
• “MAIN+SUB”: Mixed sound of both the main
and sub languages will be output.
77GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Using the Sleep Timer Changing the Brightness

You can set the system to turn off at a preset of the Front Panel Display
time, so you can fall asleep listening to music.
You can preset the time in 10 minutes The brightness of the front panel display can be
decrements. set to either of 2 levels.
SLEEP
DIMMER

Press SLEEP.
Each time you press this button, the minute Press DIMMER.
display (the remaining time) changes in the front Each time you press DIMMER, the brightness of
panel display as follows: the front panel display changes. The default
setting is underlined.
SLEEP OFF t SLEEP 90M t SLEEP 80M • “DIMMER OFF”: Bright.
R r • “DIMMER ON”: The front panel display
SLEEP 10M ..... SLEEP 60M T SLEEP 70M becomes dark.
When you set the sleep timer, “SLEEP” lights

up in the front panel display.
To check the remaining time
Press SLEEP once.
To change the remaining time

Press SLEEP repeatedly to select the desired
time.
To cancel the sleep timer

function
Press SLEEP repeatedly until “SLEEP OFF”
78GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Changing the Display Changing the Display

Mode Appearance of the Soft-
(INFORMATION MODE) touch Buttons
(ILLUMINATION MODE)
You can change the displayed information in the
front panel display. You can select the way of displaying the soft-
touch buttons located on the top of the control
unit.
X/x/c,
X/x/c,
Other Operations
SYSTEM
MENU
SYSTEM
MENU
2 Press X/x repeatedly until “INFO
MODE” appears in the front panel 1 Press SYSTEM MENU.
or c.
display, then press
2 Press X/x repeatedly until “ILLUM
3 Press X/x to select a setting. MODE” appears in the front panel
The default setting is underlined. display, then press or c.
• “STANDARD”: displays information 3 Press X/x to select a setting.
fully such as the kind of disc, track The default setting is underlined.
number, repeat mode information, radio • “STANDARD”: sets the soft-touch
frequency, etc., for the selected function. buttons lit up always.
For details of the displayed information,
• “SIMPLE”: sets the soft-touch buttons lit
see “Front Panel Display” (page 111).
up when you touch them. To operate the
• “SIMPLE”: displays the selected function soft-touch buttons, touch them once and
name only. light them up. The soft-touch buttons turn
4 Press . off if you do not touch them for about 10
The setting is made. seconds.
5 Press SYSTEM MENU. 4 Press .

The system menu turns off. The setting is made.
The system menu turns off.
continued
79GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Tip
• Even if “SIMPLE” mode is set, only N on the top of Using the DIGITAL MEDIA
the control unit lights up during playback.
Note
PORT Adapter
• When the soft-touch buttons turn off in “SIMPLE”
mode, first touch the soft-touch button area so that the
The DIGITAL MEDIA PORT (DMPORT)
soft-touch buttons light up, then operate the system adapter is for enjoying sound from a portable
with them. audio source or computer. By connecting a
DIGITAL MEDIA PORT adapter, you can
Soft-touch button area
enjoy sound from the connected component on
the system.
Available DIGITAL MEDIA PORT adapters
vary in each area.
For details on connecting the DIGITAL MEDIA
PORT adapter, see “Connecting Other
Components” (page 24).
Note
• Do not connect an adaptor other than the DIGITAL
MEDIA PORT adapter.
• Do not connect or disconnect the DIGITAL MEDIA
PORT adapter to/from the control unit while the
system is turned on.
• Depending on the type of DIGITAL MEDIA PORT
adapter (not supplied), images may also be output. In
this case, the system outputs only a composite video
signal (see page 21, connection method A)
regardless of the type of video signal.
Playing the connected

component on the system
FUNCTION
1 Press FUNCTION repeatedly until

“DMPORT” appears in the front panel
display.
80GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
2 Start playback of the connected

component.
The sound and images from the connected
component are played on the system or
connected TV.
For operation details, see the operating
instructions of the DIGITAL MEDIA
PORT adapter (not supplied).
Tip
• When listening to MP3 or other compressed music
using a portable audio source, you can enhance the
sound. Press SOUND FIELD repeatedly until
“P.AUDIO” appears in the front panel display.
• Depending on the type of DIGITAL MEDIA PORT
adapter (not supplied), you may be able to operate a
connected component using either the buttons on the
remote or the control unit. The following illustration
shows an example of buttons that can be used in this
case.
Other Operations
./>
H
x
X
81GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb12adv.fm]
masterpage:Left
specdef v20060111
2 Press DISPLAY while the system is

in stop mode.
Advanced Settings and Adjustments The Control Menu display appears on the
TV screen.
Locking Discs
(CUSTOM PARENTAL CONTROL, [PARENTAL CONTROL], then press
PARENTAL CONTROL) .
The options for [PARENTAL CONTROL]
appear.
You can set two kinds of playback restrictions
for the desired disc. 12(27)
18(34) DVD VIDEO
• Custom Parental Control T 1:32:55
You can set playback restrictions so that the
system will not play inappropriate discs. OFF
ON
• Parental Control PLAYER
Playback of some DVD VIDEOs can be PASSWORD
limited according to a predetermined level

such as the age of the users. Scenes may be
blocked or replaced with different scenes. 4 Press X/x to select [ON t], then press
The same password is used for both Custom .
Parental Control and Parental Control. x If you have not entered a password
The display for registering a new password
appears.
Number
buttons
PARENTAL CONTROL
Enter a new 4-digit password,

then press ENTER .
X/x,
DISPLAY
x Enter a 4-digit password using the number

buttons, then press .
The display for confirming the password
appears.
x When you have already registered a
password
The display for entering the password
Preventing playback of appears.
specific discs [CUSTOM
PARENTAL CONTROL]
You can set the same Custom Parental Control PARENTAL CONTROL
password for up to 40 discs. When you set the Enter password, then press ENTER .
41st-disc, the first disc is canceled.
1 Insert the disc you want to lock.
If the disc is playing, press x to stop
playback.
82GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
5 Enter or re-enter your 4-digit password

using the number buttons, then press Limiting playback for children
. [PARENTAL CONTROL]
[Custom parental control is set.] appears (DVD VIDEO only)
and the TV screen returns to the Control
Playback of some DVD VIDEOs can be limited
Menu display.
according to a predetermined level such as the
To turn off the Custom Parental age of the users. The [PARENTAL CONTROL]
Control function function allows you to set a playback limitation
level.
1 Follow steps 1 through 3 of “Preventing
playback of specific discs [CUSTOM 1 Press DISPLAY while the system is
PARENTAL CONTROL].” in stop mode.
2 Press X/x to select [OFF t], then press The Control Menu display appears on the
. TV screen.
3 Enter your 4-digit password using the 2 Press X/x to select
number buttons, then press . [PARENTAL CONTROL], then press
.
To play a disc for which Custom The options for [PARENTAL CONTROL]
Parental Control is set appear.
1 Insert the disc for which Custom Parental
12(27)
Control is set. 18(34) DVD VIDEO
The [CUSTOM PARENTAL CONTROL] T 1:32:55
display appears on the TV screen.

OFF
Advanced Settings and Adjustments

ON
PLAYER
PASSWORD
CUSTOM PARENTAL CONTROL
Custom parental control is already

set. To play, enter your password
and press ENTER . 3 Press X/x to select [PLAYER t], then
press .
x If you have not entered a password
The display for registering a new password
2 Enter your 4-digit password using the appears.
number buttons, then press .
The system is ready for playback.
PARENTAL CONTROL
Tip
• If you forget your password, enter the 6-digit number Enter a new 4-digit password,
“199703” using the number buttons when the then press ENTER .
[CUSTOM PARENTAL CONTROL] display asks
you for your password, then press . The display
will ask you to enter a new 4-digit password.
Enter a 4-digit password using the number

buttons, then press .
The display for confirming the password
appears.
continued
83GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
x When you have already registered a 7 Press X/x to select [LEVEL], then press
password .
The display for entering the password The selection items for [LEVEL] are
appears. displayed.
PARENTAL CONTROL PARENTAL CONTROL

LEVEL: OFF
Enter password, then press ENTER . STANDARD: OFF
8:
7: NC17
6: R
5:
4 Enter or re-enter your 4-digit password 8 Press X/x to select the level you want,
using the number buttons, then press then press .
. Parental Control setting is complete.
The display for setting the playback
limitation level appears.
PARENTAL CONTROL
LEVEL: 4: PG13
STANDARD: USA
PARENTAL CONTROL
LEVEL: OFF
STANDARD: USA
The lower the value, the stricter the

limitation.
5 Press X/x to select [STANDARD], then To turn off the Parental Control
press . function
The selection items for [STANDARD] are Set [LEVEL] to [OFF] in Step 8.
displayed.
To play a disc for which Parental
Control is set
PARENTAL CONTROL 1 Insert the disc and press H.
LEVEL: OFF
STANDARD: USA The display for entering your password
USA
OTHERS appears on the TV screen.
2 Enter your 4-digit password using the
The system starts playback.
6 Press X/x to select a geographic area Tip
as the playback limitation level, then • If you forget your password, remove the disc and
press . repeat steps 1 to 3 of “Preventing playback of specific
The area is selected. discs [CUSTOM PARENTAL CONTROL]”. When
When you select [OTHERS t], select and you are asked to enter your password, enter “199703”
using the number buttons, then press . The display
enter a standard code in the table of
will ask you to enter a new 4-digit password. After
“Parental Control Area Code List”
you enter a new 4-digit password, replace the disc in
(page 108) using the number buttons. the control unit and press H. When the display for
entering your password appears on the TV screen,
enter your new password.
84GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Note
• When you play discs which do not have the Parental Calibrating the
Control function, playback cannot be limited on this
system. Appropriate Settings
• Depending on the disc, you may be asked to change
the parental control level while playing the disc. In Automatically
this case, enter your password, then change the level.
If the Resume Play mode is canceled, the level returns
(AUTO CALIBRATION)
to the previous level.
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
Changing the password automatically.
1 Press DISPLAY while the system is
in stop mode.
TV screen.
[PARENTAL CONTROL], then press FUNCTION
.
The options for [PARENTAL CONTROL] C/X/x/c,
appear. DISPLAY
3 Press X/x to select [PASSWORD t],
then press .
The display for entering the password

appears.
4 Enter your 4-digit password using the
5 Enter a new 4-digit password using the
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the volume
6 To confirm your password, re-enter it down. Give consideration to children and neighbor.
using the number buttons, then press
.
If you make a mistake entering

your password
Press C before you press and input the
correct number.
continued
85GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
1 Connect the calibration mic to the 4 Press X/x to select [AUTO

ECM-AC2 jack on the rear of the control CALIBRATION], then press .
unit, and set it up at the ear level using
a tripod, etc. (not supplied). 1(44)
3(28) DVD VIDEO
The front of each speaker should face the T 0:03:04
calibration mic, and there should be no AUTO CALIBRATION
START
obstruction between the speakers and the
calibration mic.
Note
• The ECM-AC2 jack is used for the supplied
calibration mic only. Do not connect other
microphones. 5 Press .
Rear of the control unit The [AUTO CALIBRATION] display
appears.
AUTO CALIBRATION
DMPORT
Connect calibration mic. Start

measurement?
YES
NO
To ECM-AC2 jack
Calibration mic
6 Press X/x to select [YES], then press
to start [AUTO CALIBRATION].
Be quiet during the measurement.
Measuring. Please wait a moment.
Note
• Avoid being in the measurement area and
making noise during the measurement (about 1
minute), to avoid measurement failure. During
the measurement, test signals are output from
the speakers.
• The environment of the room in which the
2 Press FUNCTION repeatedly until system is installed may affect measurements.
“DVD” appears in the front panel
display.
3 Press DISPLAY when the system is
in stop mode.
TV screen.
86GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
• If an error message appears on the TV screen, About error messages for the
follow the message, then select [YES]. auto calibration
An error message appears when:
– the calibration mic is not connected. If the following message appears during [AUTO
– front speakers are not correctly connected. CALIBRATION], check “Symptoms and
– surround speakers are not correctly remedies” and retry the auto calibration.
connected.
– front and surround speakers are not correctly Error Symptoms and remedies
connected. message
– subwoofer is not connected. [Check No channel sound can be detected.
7 Press C/X/x/c to select [YES] or [NO], calibration mic Check that the calibration mic is
connection.] connected properly.
then press .
If the calibration mic is connected
x The measurement is OK. properly, the calibration mic or
Unplug the calibration mic, then select calibration mic cord may be
[YES]. The result is implemented. damaged.
[Mic input level The calibration mic or system may
Measurement complete. overloaded.] be damaged.
FRONT L : 5.00m 0.0dB Contact your Sony dealer or local
FRONT R : 5.00m 0.0dB
CENTER : 5.00m + 1.0dB authorized Sony service facility.
SUBWOOFER : 5.00m + 4.0dB
SURROUND L : 3.00m - 2.0dB [Check front Front speakers are not connected.
SURROUND R : 3.00m - 2.0dB speaker Check that the front speakers are
If OK, unplug calibration mic and select connection.] connected properly (page 12).
“YES”.
YES NO
[Check Only one surround speaker is
surround connected. Check that the surround
speaker speakers are connected properly

x The measurement is not OK.
connection.] (page 12).
Follow the message, then select [YES] to
retry. [Check front Front speakers are not connected
and surround and only one surround speaker is
speaker connected. Check that the speakers
Measurement failure.
connection.] are connected properly (page 12).
Check speaker connection. [Check Contact your Sony dealer or local
Retry?
subwoofer authorized Sony service facility.
YES connection.]
NO
Tip
• You can check the distance between the listening
position and each speaker. See page 94.
Note
• While the Auto Calibration function works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
– do not insert or eject a disc.
– do not unplug the calibration mic.
87GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
4 Press X/x to select [CUSTOM], then

Using the Setup Display press .
By using the Setup Display, you can make
various adjustments to items such as picture and LANGUAGE SETUP
OSD: ENGLISH
sound. MENU: ENGLISH
AUDIO: ORIGINAL
For an overall list of Setup Display items, see SUBTITLE: AUDIO FOLLOW
page 117.
Displayed items differ depending on the country
model.
5 Press X/x to select the setup item from

the displayed list: [LANGUAGE
SETUP], [SCREEN SETUP], [CUSTOM
SETUP], or [SPEAKER SETUP]. Then
press .
FUNCTION
The Setup item is selected.
X/x, Example: [SCREEN SETUP]
DISPLAY Selected item
SCREEN SETUP
TV TYPE: 16:9
YCBCR/RGB (HDMI): YCBCR
SCREEN SAVER: ON
BACKGROUND: JACKET PICTURE
4:3 OUTPUT: FULL
Note Setup items

• Playback settings stored in the disc take priority over
the Setup Display settings and not all the functions
described may work.
6 Select an item using X/x, then press
.
1 Press FUNCTION repeatedly until The options for the selected item appear.
“DVD” appears in the front panel
Example: [TV TYPE]
display.
2 Press DISPLAY when the system is SCREEN SETUP
TV TYPE: 16:9
in stop mode. YCBCR/RGB (HDMI): 16:9
The Control Menu display appears on the SCREEN SAVER: 4:3 LETTER BOX
4:3 PAN SCAN
TV screen. 4:3 OUTPUT: FULL
3 Press X/x to select [SETUP],

then press .
Options
12(27)
18(34) DVD VIDEO
T 0:00:02
QUICK
QUICK
CUSTOM
RESET
BNR
88 GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
7 Select a setting using X/x, then press

. Setting the Display or
The setting is selected and setup is
complete. Sound Track Language
[LANGUAGE SETUP]
SCREEN SETUP
TV TYPE: 4:3 LETTER BOX
YCBCR/RGB (HDMI): YCBCR [LANGUAGE SETUP] allows you to set
SCREEN SAVER: ON various languages for the on-screen display or
4:3 OUTPUT: FULL sound track.
Select [LANGUAGE SETUP] in the Setup

Selected setting Display. For details, see “Using the Setup
Display” (page 88).
LANGUAGE SETUP
OSD: ENGLISH
MENU: ENGLISH
AUDIO: ORIGINAL
SUBTITLE: AUDIO FOLLOW
x [OSD] (On-Screen Display)

Switches the display language on the TV screen.

x [MENU] (DVD VIDEO only)
You can select the desired language for the
disc’s menu.
x [AUDIO] (DVD VIDEO only)
Switches the language of the sound track.
When you select [ORIGINAL], the language
given priority in the disc is selected.
x [SUBTITLE] (DVD VIDEO only)
Switches the language of the subtitle recorded
on the DVD VIDEO.
When you select [AUDIO FOLLOW], the
language for the subtitles changes according to
the language you selected for the sound track.
Tip
• If you select [OTHERS t] in [MENU], [AUDIO],
and [SUBTITLE], select and enter a language code
from “Language Code List” (page 108) using the
number buttons.
Note
• When you select a language in [MENU], [AUDIO],
or [SUBTITLE] that is not recorded on the DVD
VIDEO, one of the recorded languages will be
automatically selected (depending on the disc, the
language may not be selected automatically).
89GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Note
Settings for the Display • Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
[SCREEN SETUP] vice versa.
Choose settings according to the TV to be x [YCBCR/RGB (HDMI)]

connected. Selects the type of HDMI signal output from
HDMI OUT jack.
Select [SCREEN SETUP] in the Setup Display. [YCBCR] Outputs YCBCR signals.
For details, see “Using the Setup Display”
[RGB] Outputs RGB signals.
(page 88).
The default settings are underlined.
Note
SCREEN SETUP • If the playback picture becomes distorted, set
TV TYPE: 16:9
YCBCR/RGB (HDMI): YCBCR
[YCBCR] to [RGB].
SCREEN SAVER: ON • If the HDMI OUT jack is connected to equipment
4:3 OUTPUT: FULL with a DVI jack, [RGB] signals will be automatically
output even when you select [YCBCR].
x [SCREEN SAVER]
The screen saver image appears on the TV
screen when you leave the system in pause or
x [TV TYPE]
stop mode for 15 minutes, or when you play back
Selects the aspect ratio of the connected TV (4:3
a CD, DATA CD (MP3 audio), or DATA DVD
standard or wide).
(MP3 audio) for more than 15 minutes. The
screen saver will help prevent your display device
[16:9] Select this when you connect a
from becoming damaged (ghosting). Press any
wide-screen TV or a TV with a
wide mode function. button (e.g., H button) to cancel the screen
saver.
[4:3 LETTER Select this when you connect a 4:3
BOX] screen TV. Displays a wide picture
[ON] Turns on the screen saver.
with bands on the upper and lower
portions of the screen. [OFF] Turns off the screen saver.
[4:3 PAN SCAN] Select this when you connect a 4:3
screen TV. Automatically displays x [BACKGROUND]
the wide picture on the entire Selects the background color or picture on the
screen and cuts off the portions TV screen in stop mode or while playing a CD,
that do not fit. DATA CD (MP3 audio), or DATA DVD (MP3
audio).
[16:9]
[JACKET The jacket picture (still picture)
PICTURE] appears, but only when the jacket
picture is already recorded on the
disc (CD-EXTRA, etc.). If the
[4:3 LETTER BOX] disc does not contain a jacket
picture, the [GRAPHICS] picture
appears.
[GRAPHICS] A preset picture stored in the
system appears.
[4:3 PAN SCAN]
[BLUE] The background color is blue.
[BLACK] The background color is black.
90GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
x [4:3 OUTPUT] Does your TV accept progressive

This setting is effective only when you set [TV signals?
TYPE] in [SCREEN SETUP] to [16:9]
Progressive is a TV image display method
(page 90). Adjust to watch 4:3 aspect ratio
which reduces flickering, and sharpens the
progressive signals. If you can change the aspect
image. To display using this method, you need
ratio on your progressive format (525p/625p)
to connect to a TV that accepts progressive
compatible TV, change the setting on your TV,
signals.
not the system. Note that this setting is effective
only for the HDMI connection or progressive
signals output from the VIDEO OUT
(COMPONENT) jacks.
Note
• This setting is effective only when “PROGRE”
(PROGRESSIVE) is selected by using FUNCTION
RESOLUTION (page 91).
[FULL] Select this when you can change

the aspect ratio on your TV.
[NORMAL] Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left and RESOLUTION
right sides of the image.

“PROGRESSIVE” lights up in the front panel

display when the system outputs progressive
signals.
16:9 aspect ratio TV 1 Press FUNCTION repeatedly to select
“DVD.”
2 Press RESOLUTION.
The current signal appears in the front panel
display.
Each time you press RESOLUTION, the
display changes as follows:
t “INTERLACE” (NORMAL)
r
“PROGRE” (PROGRESSIVE)
continued
91GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
x “INTERLACE” (NORMAL) output through the VIDEO OUT (COMPONENT)

Select this setting when: jacks. Even though you set to “PROGRE”
(PROGRESSIVE), images from the VIDEO OUT
– your TV does not accept progressive signals,
(VIDEO) jack are unaffected as they are output in the
or,
interlace format.
– the TV is connected to the VIDEO OUT
(VIDEO) jack. To select the type of video signal
output from the HDMI OUT (high-
x “PROGRE” (PROGRESSIVE)
Select this setting when: definition multimedia interface
– your TV accepts progressive signals, and,
out) jack
– the TV is connected to the VIDEO OUT When you connect the control unit and the TV
(COMPONENT) jacks. with the HDMI cable, select the type of video
Normally select this if the above conditions are signals output from the HDMI OUT (high-
met. This automatically detects the software definition multimedia interface out) jack.
type, and selects the appropriate conversion For details, refer also to the operating
method. Note that the picture will not be clear or instructions supplied with the TV/projector, etc.
no picture will appear if you select these settings 1 Press FUNCTION repeatedly to select
when either of the above conditions is not met. “DVD.”
Note 2 Press RESOLUTION.
• When you connect the control unit and the TV with The current type of video signals appears in
the HDMI cable during the system is set to the front panel display.
“INTERLACE” (NORMAL), the system is set to Each time you press RESOLUTION, the
“PROGRE” (PROGRESSIVE) automatically. display changes as follows:
Tip t “480p*” or “576p*”
• When you connect the control unit and the TV with
r
the HDMI cable, RESOLUTION is used for selecting
“720p*”
the type of video signals output from the HDMI OUT
jack. For details, see “To select the type of video
r
signal output from the HDMI OUT (high-definition “480p*” or “576p*”
multimedia interface out) jack” (page 92). r
“1080i*”
About DVD software types and
• “480p*”: Sends [720 × 480p] video
the conversion method
signals.
DVD software can be divided into 2 types: film • “576p*”: Sends [720 × 576p] video
based software and video based software. signals.
Video based software is derived from TV, such • “720p*”: Sends [1280 × 720p] video
as dramas and sit-coms, and displays images at
signals.
30 frames/60 fields per second. Film based
• “1080i*”: Sends [1920 × 1080i] video
software is derived from film and displays
signals.
images at 24 frames per second. Some DVD
* i: interlace, p: progressive
software contains both video and film.
In order for these images to appear natural on Note
your screen when output in progressive format, • When the HDMI indicator on the front panel lights
the progressive signals need to be converted to up, images other than [720 × 480p] or [720 × 576p]
match the type of DVD software that you are are stretched vertically.
watching. When connecting to a standard
Note 4:3 screen TV
• When you play video based software in progressive Depending on the disc, the image may not fit
signal format, sections of some types of images may
your TV screen.
appear unnatural due to the conversion process when
To change the aspect ratio, see page 90.
92GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
[ON] Sets the [STB SYNCHRO]

Custom Settings function to on.
[CUSTOM SETUP] Note

• When this function is set to [ON], [DIGITAL IN]
Use this to set up playback related and other function setting begins.
settings.
x [DIGITAL IN]
Select [CUSTOM SETUP] in the Setup Display. Assigns a digital sound input corresponding
For details, see “Using the Setup Display” with the function “TV” and “SAT/CABLE.”
(page 88).
The default settings are underlined. [TV t OPT, Optical audio input signals are
SAT/CABLE t assigned to “TV” function,
COAX] coaxial audio input signals are
CUSTOM SETUP
HDMI CONTROL: OFF
STB SYNCHRO: OFF assigned to “SAT/CABLE”
DIGITAL IN: TV OPT, SAT/CABLE COAX function.
PAUSE MODE: AUTO
TRACK SELECTION: OFF [TV t COAX, Coaxial audio input signals are
AUDIO DRC: OFF
SAT/CABLE t assigned to “TV” function, optical
AUDIO (HDMI): OFF OPT] audio input signals are assigned to
“SAT/CABLE” function.
x [HDMI CONTROL]
x [PAUSE MODE] (DVD VIDEO/DVD-R/
Switches the HDMI CONTROL function on or DVD-RW only)
off. This function is available when you connect Selects the picture in pause mode.
the system and TV with the HDMI cable. For
details, see “Preparing for the HDMI

[AUTO] The picture, including subjects
CONTROL function” (page 40).
that move dynamically, is output
with no jitter. Normally select this
[OFF] Sets the [HDMI CONTROL] position.
function to off.
[FRAME] The picture, including subjects
[ON] Sets the [HDMI CONTROL] that do not move dynamically, is
function to on. output in high resolution.
You can operate mutually
between components that are x [TRACK SELECTION] (DVD VIDEO only)
connected with the HDMI cable. Gives the sound track which contains the highest
number of channels priority when you play a
Note DVD VIDEO on which multiple audio formats
• When you set to [ON] without the HDMI connection (PCM, DTS, MPEG audio, or Dolby Digital
of the TV, [Please verify the HDMI connection.] format) are recorded.
appears and you cannot set to [ON].
x [STB SYNCHRO] [OFF] No priority given.
Switches the STB SYNCHRO function on or [AUTO] Priority given.
off. This function is available when you connect
the system and TV with the HDMI cable and Note
you set [HDMI CONTROL] to [ON]. For • When you set the item to [AUTO], the language may
details, see “Enjoying STB (Set Top Box) change. The [TRACK SELECTION] setting has
Digital Sound or Digital Satellite Receiver higher priority than the [AUDIO] settings in
Sound from the System” (page 45). [LANGUAGE SETUP] (page 89). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
[OFF] Sets the [STB SYNCHRO]
tracks have the same number of channels, the system
function to off.
continued
93GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
selects PCM, DTS, Dolby Digital sound, and MPEG

audio tracks in this order. Settings for the Speakers
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
[SPEAKER SETUP]
Switches the Multi-disc Resume setting on or
To obtain the best possible surround sound, set
off.
connection of the speakers and their distance
from your listening position. Then use the test
[ON] Stores the resume settings in tone to adjust the level and the balance of the
memory.
speakers to the same level.
[OFF] Does not store the resume settings
in memory. Playback restarts at Select [SPEAKER SETUP] in the Setup
the resume point only for the Display. For details, see “Using the Setup
current disc in the system.
Display” (page 88).
x [AUDIO DRC] (DVD VIDEO only)
Narrows the dynamic range of the sound track. SPEAKER SETUP
CONNECTION:
Useful for watching movies at low volume late DISTANCE(FRONT):
at night. DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE: OFF
[OFF] No compression of dynamic FRONT: YES
range. CENTER: YES
SURROUND: YES
SUBWOOFER: YES
[STANDARD] Reproduces the sound track with
the kind of dynamic range that the
To return to the default setting
recording engineer intended.
when changing a setting
[MAX] Compresses dynamic range fully.
Select the item, then press CLEAR. Note that
x [AUDIO (HDMI)] only the [CONNECTION] setting does not
Selects the audio output status from the HDMI return to the default setting.
OUT jack. x[CONNECTION]
If you do not connect center or surround
[OFF] The sound is not output from the speakers, set the parameters for [CENTER] and
HDMI OUT jack. [SURROUND]. Since the front speaker and
[ON] Outputs audio signals by subwoofer setting is fixed, you cannot change
converting Dolby Digital, DTS, or them.
96 kHz/24 bit PCM signals to 48
[FRONT] [YES]
kHz/ 16 bit PCM.
[CENTER] [YES]: Normally select this.
Note [NONE]: Select this if no center
• When you connect the control unit and TV with the speaker is used.
HDMI cable and [ON] is selected, AUDIO DRC, A/ [SURROUND] [YES]: Normally select this.
V SYNC, TONE, MOVIE/MUSIC, and sound field
[NONE]: Select this if no
are not applied to the sound that is output from the
surround speaker is used.
TV.
[SUBWOOFER] [YES]
x [DivX]
Displays the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.
94GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
x [DISTANCE (FRONT)]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 18), the settings is automatically
displayed.
Be sure to change the value in the Setup Display

when you move the speakers.
[L/R] Surround speaker distance

3.0 m* from the listening position can
(appears when you set be set from 0.0 to 7.0 meters.
[SURROUND] to
[YES] in the
Be sure to change the value in the Setup Display [CONNECTION]
when you move the speakers. setting.)
* When you perform the Quick Setup (page 18), the

[L/R] Front speaker distance from
3.0 m* the listening position can be default settings are changed.
set from 0.0 to 7.0 meters.
Note
[CENTER] Center speaker distance from • Depending on the input stream, the [DISTANCE
3.0 m* the listening position can be (FRONT)]/[DISTANCE (SURROUND)] setting
(appears when you set set from 0.0 to 7.0 meters. may not be effective.
[CENTER] to [YES] in
the [CONNECTION] • When the speaker distance setting is not in the
setting.) recommended range, / ** m is displayed (**
being the number). indicates over the
[SUBWOOFER] Subwoofer distance from the
3.0 m* recommended distance. indicates below.
listening position can be set
from 0.0 to 7.0 meters. x [LEVEL (FRONT)]
You can vary the level of front speakers as
* When you perform the Quick Setup (page 18), the follows. Be sure to set [TEST TONE] to [ON]
default settings are changed. for easy adjustment.
x [DISTANCE (SURROUND)]
The default distance setting for the speakers in [L/R] Set this between -6.0 dB and
0.0 dB +6.0 dB.
relation to the listening position is shown below.
When you set the distance using the Quick Setup [CENTER] Set this between -6.0 dB and
(page 18), the settings is automatically 0.0 dB +6.0 dB.
(appears when you set
displayed.
[CENTER] to [YES] in
the [CONNECTION]
setting.)
[SUBWOOFER] Set this between -6.0 dB and
0.0 dB +6.0 dB.
continued
95GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
x [LEVEL (SURROUND)] 1 Press DISPLAY when the system is

You can vary the level of surround speakers as in stop mode.
follows. Be sure to set [TEST TONE] to [ON] The Control Menu display appears.
for easy adjustment.
2 Press X/x to select [SETUP],
then press .
[L/R] Set this between -6.0 dB and
0.0 dB +6.0 dB. The options for [SETUP] appear.
(appears when you set
[SURROUND] to 3 Press X/x to select [CUSTOM], then
[YES] in the press .
[CONNECTION]
setting.)
4 Press X/x repeatedly to select
To adjust the volume of all the [SPEAKER SETUP], then press or
speakers at one time c.
Press VOLUME +/– on the remote or touch 5 Press X/x repeatedly to select [TEST
VOLUME +/– (soft-touch button) on the control TONE], then press or c.
unit. 6 Press X/x repeatedly to select [ON],
x [TEST TONE] then press .
The speakers will emit a test tone to adjust You will hear the test tone from each
[LEVEL (FRONT)] and [LEVEL speaker in sequence.
(SURROUND)].
7 From your listening position, adjust the
[OFF] The test tone is not emitted from the value of [LEVEL (FRONT)] or [LEVEL
speakers. (SURROUND)] using C/X/x/c.
[ON]
The test tone is emitted from only the
The test tone is emitted from each speaker
in sequence while adjusting level. When speaker which you are adjusting.
you select one of the [SPEAKER SETUP] 8 Press when you have finished
items, the test tone is emitted from each making adjustments.
speaker in sequence.
9 Press X/x repeatedly to select [TEST
TONE], then press .
Adjusting the speaker level by 10 Press X/x repeatedly to select [OFF],
using the test tone then press .
Note
• The test tone signals are not output from the HDMI
OUT jack.
C/X/x/c,
DISPLAY
96GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Returning to the Default Returning the settings on the

Setup Display to the default
Settings 1 Press FUNCTION repeatedly until “DVD”
Returning the sound field 2 Press DISPLAY when the system is in
settings or radio settings to stop mode.
the default The Control Menu display appears on the TV
screen.
3 Press X/x to select [SETUP], then
press .
4 Press X/x to select [RESET], then press
.
5 Press X/x to select [YES].
You can also quit the process and return to the
Control Menu display by selecting [NO] here.
6 Press .
"/1 All the settings explained on pages 89 to 96
return to the default settings. Do not press [/
1 Turn off the power. 1 while resetting the system as it takes a few
seconds to complete.
2

Press and hold "/1 on the control unit
Note
about 5 seconds.
• When you turn the system on after resetting and no
“MEMORY CLR” and “PUSH POWER” disc is in the control unit, the guide message appears
appear alternately in the front panel display on the TV screen. To perform the Quick Setup
about 10 seconds. (page 18), press , to return to normal screen, press
3 Press "/1. CLEAR.
• “BASS,” “MIDDLE,” or “TREBLE” settings are also
“CLEARING” appears in the front panel returned to the default.
display and the default settings are returned.
After “CLEARED!” appears, the system is
turned off.
Note
• In Step 3, if you do not press "/1 or press any buttons
other than "/1 on the control unit, the system turns
on. The setting is not made.
• When you turn on the system after returning to the
default settings, wait about 20 seconds before turning
on the power by pressing "/1.
97GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb13add.fm]
masterpage:Left
specdef v20060111
On adjusting volume
• Do not turn up the volume while listening to a section
Additional Information with very low level inputs or no audio signals. If you
do, the speakers may be damaged when a peak level
Precautions section is suddenly played.
On power sources On cleaning

• Unplug the subwoofer from the wall outlet if you do • Clean the cabinet, panel, and controls with a soft cloth
not intend to use it for an extended period of time. To slightly moistened with a mild detergent solution. Do
disconnect the cord, pull it out by the plug, never by not use any type of abrasive pad, scouring powder or
the cord. solvent such as alcohol or benzine.
If you have any questions or problems concerning
On placement your system, please consult your nearest Sony dealer.
• Place the system in a location with adequate On cleaning discs, disc/lens
ventilation to prevent heat build-up in the system.
cleaners
• At high volume, over long periods of time, the cabinet
becomes hot to the touch. This is not a malfunction. • Do not use cleaning discs or disc/lens cleaners
However, touching the cabinet should be avoided. Do (including wet or spray types). These may cause
not place the control unit in a confined space where apparatus to malfunction.
ventilation is poor as this may cause overheating.
On your TV’s color
• Do not block the ventilation slots by putting anything
on the system. The system is equipped with a high • If the speakers should cause the TV screen to have
power amplifier. If the ventilation slots are blocked, color irregularity, turn off the TV then turn it on after
the control unit can overheat and malfunction. 15 to 30 minutes. If color irregularity should persist,
• Do not place the control unit on surfaces (rugs, place the speakers further away from the TV set.
blankets, etc.) or near materials (curtains, draperies)
that may block the ventilation slots. IMPORTANT NOTICE
Caution: This system is capable of holding a still
• Do not install the control unit near heat sources such
video image or on-screen display image on your
as radiators, or air ducts, or in a place subject to direct
television screen indefinitely. If you leave the still
sunlight, excessive dust, mechanical vibration, or
video image or on-screen display image displayed
shock.
on your TV for an extended period of time you risk
• Do not install the control unit in an inclined position.
permanent damage to your television screen.
It is designed to be operated in a horizontal position
Projection televisions are especially susceptible to
only.
this.
• Keep the control unit and discs away from equipment
with strong magnets, such as microwave ovens, or
The nameplate is located on the bottom exterior of the
large loudspeakers.
control unit.
• Do not place anything on the control unit and the
subwoofer. On moving the system
On operation When you carry the system, use the following
procedure to protect the inner mechanism.
• If the system is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture 1 Press Z to remove a disc.
may condense on the lenses inside the control unit. Make sure that a disc is removed from the
Should this occur, the system may not operate control unit.
properly. In this case, remove the disc and leave the
system turned on for about half an hour until the 2 Press "/1 to turn off the power.
moisture evaporates. 3 Remove the AC power cord (mains lead)
• When you move the system, take out any disc. If you from the wall outlet (mains).
don’t, the disc may be damaged.
• If anything falls into the cabinet, unplug the
subwoofer and have it checked by qualified personnel
before operating it any further.
98GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Notes about the Discs Troubleshooting

On handling discs If you experience any of the following
• To keep the disc clean, handle the disc by its difficulties while using the system, use this
edge. Do not touch the surface. troubleshooting guide to help remedy the
problem before requesting repairs. Should any
• Do not stick paper or tape on the disc.
problem persist, consult your nearest Sony
dealer.
Note that if service personnel changes some
parts during repair, these parts may be retained.
Power
• Do not expose the disc to direct sunlight or The power is not turned on.
heat sources such as hot air ducts, or leave it in • Check that the AC power cord (mains lead) is
a car parked in direct sunlight as the connected securely.
temperature may rise considerably inside the • Press "/1 after all indications disappear from the
car. front panel display.
• After playing, store the disc in its case. • After connecting the AC power cord (mains lead),
wait about 20 seconds before turning on the power
On cleaning by pressing "/1.
• Before playing, clean the disc with a cleaning If “PROTECTOR” and “PUSH POWER” appear
cloth. alternately in the front panel display.
Wipe the disc from the center out. Press "/1 to turn off the system, and check the
following items after “STANDBY” disappears.
• Are the 3 and # speaker cords short-circuited?
• Are you using only the specified speakers?
Additional Information
• Is anything blocking the ventilation slots of the
system?
Check the above items and fix any problems. After
“STANDBY” disappears, wait about 20 seconds
• Do not use solvents such as benzine, thinner, before turning on the power by pressing "/1. If the
commercially available cleaners, or anti-static cause of the problem cannot be found even after
spray intended for vinyl LPs. checking all the above items, consult your nearest
Sony dealer.
Picture
There is no picture.
• The video connecting cords are not connected
securely.
• The video connecting cords are damaged.
• The control unit is not connected to the correct TV
input jack (page 17, 21).
• The video input on the TV is not set so that you
can view pictures from the system.
• You have set progressive format but your TV
cannot accept the signal in progressive format. In
this case, return the setting to interlace format (the
default setting) (page 91).
• Even if your TV is compatible with progressive
format (525p/625p) signals, the image may be
affected when you set progressive format. In this
continued
99GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
case, return the setting to interlace format (the • If the speakers are used with a CRT-based TV or
default setting) (page 91). projector, install the speakers at least 0.3 m from
• Re-connect the connecting cord securely. the TV set.
• The control unit is connected to an input device • If the color irregularity persists, turn off the TV set
that is not HDCP (high-bandwidth digital content once, then turn it on after 15 to 30 minutes.
protection) compliant (“HDMI” does not light up • If howling occurs, reposition the speakers further
in the front panel display) (page 111). away from the TV set.
• If the HDMI OUT jack is used for video output, • Make sure that no magnetic object (magnetic latch
changing the type of video signal output from the on a TV stand, health care device, toy, etc.) is
HDMI OUT jack by pressing RESOLUTION may placed near the speakers.
solve the problem (page 92).
Connect the TV and the control unit using a video Sound
jack other than the HDMI OUT, and switch the
There is no sound.
TV’s input to the connected video input so that
• The speaker cord is not connected securely.
you can see the on-screen displays. Change the
type of video signal output from the HDMI OUT • Press MUTING on the remote if “MUTING ON”
jack, and switch the TV’s input back to HDMI. If is displayed in the front panel display.
the picture still does not appear, repeat the steps • The system is in pause mode or in Slow-motion
and try other options. Play mode. Press H to return to normal play
• You have selected “PROGRE” (PROGRESSIVE) mode.
using the RESOLUTION button on the remote • Fast forward or fast reverse is performed. Press
(“PROGRESSIVE” lights up in the front panel H to return to normal play mode.
display) even though your TV cannot accept the • Check the speaker settings (page 94).
progressive signal. In this case, disconnect the • The equipment connected to the HDMI OUT jack
HDMI cable from the control unit and then select does not conform to the audio signal format, in
“INTERLACE” (NORMAL) so that this case set [AUDIO (HDMI)] in [CUSTOM
“PROGRESSIVE” indicator turns off. SETUP] to [ON] (page 94).
• If the signal from the VIDEO OUT (VIDEO) jack No sound is output from the HDMI OUT jack.
is distorted, change the type of video signal output
• Set [AUDIO (HDMI)] in [CUSTOM SETUP] to
from the HDMI OUT jack by pressing
[ON] (page 94).
RESOLUTION to [720 × 480p] or [720 × 576p]
• The HDMI OUT jack is connected to a DVI
(page 92).
(digital visual interface) device (DVI (digital
Picture noise appears. visual interface) jacks do not accept audio
• The disc is dirty or flawed. signals).
• If the picture output from your system goes • Try the following: 1 Turn the system off and on
through your VCR to get to your TV, the copy- again. 2 Turn the connected equipment off and
protection signal applied to some DVD programs on again. 3 Disconnect and then connect the
could affect picture quality. If you still experience HDMI cable again.
problems even when you connect your control
The left and right sounds are unbalanced or
unit directly to your TV, try connecting your
reversed.
control unit to your TV’s video input (except for
• Check that the speakers and components are
the HDMI jack) (page 21).
connected correctly and securely.
Even though you set the aspect ratio in [TV • Perform [AUTO CALIBRATION] (page 85).
TYPE] of [SCREEN SETUP], the picture does
not fill the screen. Severe hum or noise is heard.
• The aspect ratio on the disc is fixed. • Check that the speakers and components are
connected securely.
Color irregularity occurs on the TV screen. • Check that the connecting cords are away from a
The subwoofer and the front speakers in this system transformer or motor, and at least 3 meters away
are magnetically shielded to prevent magnetic from your TV set or a fluorescent light.
leakage. However, some leakage may occur, as a • Move your TV away from the audio components.
high-strength magnet is employed. If this happens, • The plugs and jacks are dirty. Wipe them with a
check the following items: cloth slightly moistened with alcohol.
• Clean the disc.
100GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
The sound loses stereo effect when you play a • Press DISPLAY so that the frequency appears in
VIDEO CD, a CD, or an MP3. the front panel display.
• Set the audio setting to [STEREO] by pressing The remote does not function.
AUDIO (page 55). • There are obstacles between the remote and the
• Make sure the control unit is connected properly. control unit.
The surround effect is difficult to hear when • The distance between the remote and the control
you are playing a Dolby Digital, DTS, or MPEG unit is too far.
audio sound track. • The remote is not pointed at the remote sensor on
• Make sure the sound field function is on (page 37). the control unit.
• Check the speaker connections and settings (page • The batteries in the remote are weak.
12, 94). A disc does not play.
• Depending on the DVD, the output signal may not • There is no disc inserted.
be the entire 5.1 channel. It may be monaural or • The disc is upside down.
stereo even if the sound track is recorded in Dolby Insert the disc with the playback side facing down.
Digital or MPEG audio format. • The system cannot play CD-ROMs, etc. (page 5).
The sound comes from the center speaker • The region code on the DVD does not match the
only. system.
• Check the speaker connections. • Moisture has condensed inside the control unit
• Depending on the disc, the sound may come from and may cause damage to the lenses. Remove the
the center speaker only. disc and leave the control unit turned on for about
half an hour.
No sound is heard from the center speaker.
• The disc is not written properly.
• Check the speaker connections and settings (page
• The disc is dirty or flawed.
12, 94).
• Set the sound field to other than “OMNI- An MP3 audio track cannot be played.
DIRECTIONAL SOUND” (page 37). • The DATA CD is not recorded in an MP3 format
• Depending on the source, the effect of the center that conforms to ISO 9660 Level 1/Level 2, or
speaker may be less noticeable. Joliet.
• The DATA DVD is not recorded in an MP3
No sound or only a very low-level sound is
format that conforms to UDF (Universal Disk
heard from the surround speakers.
Format).
• Check the speaker connections and settings (page
• The MP3 audio track does not have the extension
12, 94).
“.MP3.”
• Make sure the sound field function is on (page 37).
• The data is not formatted in MP3 even though it
• Depending on the source, the effect of the
has the extension “.MP3.”
surround speakers may be less noticeable.
• The data is not MPEG1 Audio Layer 3 data.
• A 2 channel source is being played.
• The system cannot play audio tracks in MP3PRO
The beginning of the sound is cut off. format.
• Set the Movie/Music mode to “MOVIE” or • The [MODE (MP3, JPEG)] setting has been set to
“MUSIC” (page 36). [IMAGE (JPEG)] (page 66).
• Set the sound field to “A.F.D. STD” (page 37). • If you cannot change the [MODE (MP3, JPEG)]
setting, re-load the disc or turn the system off, then
Operation on.
Radio stations cannot be tuned in. • The DATA CD/DATA DVD contains a DivX
• Check that the antenna (aerial) is connected video file.
securely. Adjust the antenna (aerial) or connect an A JPEG image file cannot be played.
external antenna (aerial) if necessary. • The DATA CD is not recorded in a JPEG format
• The signal strength of the stations is too weak that conforms to ISO 9660 Level 1/Level 2, or
(when tuning in with automatic tuning). Use direct Joliet.
tuning. • The DATA DVD is not recorded in a JPEG format
• No stations have been preset or the preset stations that conforms to UDF (Universal Disk Format).
have been cleared (when tuning by scanning • It has an extension other than “.JPEG” or “.JPG.”
preset stations). Preset the stations (page 71).
continued
101GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
• It is larger than 3,072 (width) × 2,048 (height) in You cannot perform some functions such as
normal mode, or more than 2,000,000 pixels in Stop, Search, Slow-motion Play, or Repeat
Progressive JPEG which is mainly used on the Play.
Internet WEB site.
• Depending on the disc, you may not be able to
• It does not fit the screen (those images are perform some of the operations above. See the
reduced). operating instructions that came with the disc.
• The [MODE (MP3, JPEG)] setting has been set to
[AUDIO (MP3)] (page 66). Messages do not appear on the screen in the
language you want.
• If you cannot change the [MODE (MP3, JPEG)]
setting, re-load the disc or turn the system off, then • In the Setup Display, select the desired language
on. for the on-screen display in [OSD] under
[LANGUAGE SETUP] (page 89).
• The DATA CD/DATA DVD contains a DivX
video file. The language for the sound track cannot be
changed.
The MP3 audio tracks and JPEG image files
start playing simultaneously. • Multilingual tracks are not recorded on the DVD
being played.
• [AUTO] has been selected in [MODE (MP3,
JPEG)] (page 66). • The DVD prohibits changing the language for the
sound track.
The DivX video file cannot be played.
The subtitle language cannot be changed.
• The file is not created in DivX format.
• Multilingual subtitles are not recorded on the
• The file has an extension other than “.AVI” or
DVD being played.
“.DIVX.”
• The DVD prohibits changing the subtitles.
• The DATA CD/DATA DVD is not created in a
DivX format that conforms to ISO 9660 Level 1/ The subtitles cannot be turned off.
Level 2 or, Joliet/UDF. • The DVD prohibits turning off subtitles.
• The DivX video file is larger than 720 (width) ×
The angles cannot be changed.
576 (height).
• Multi-angles are not recorded on the DVD being
The titles of album/track/file name are not played (page 61).
displayed correctly. • The DVD prohibits changing the angles.
• The system can only display numbers and letters
A disc cannot be ejected and “LOCKED”
of the alphabets. Other characters are displayed as
[*].
• Contact your Sony dealer or local authorized Sony
A disc does not start playing from the service facility.
beginning.
[Data error] appears on the TV screen when
• Program Play, Shuffle Play, or Repeat Play has
playing a DATA CD or DATA DVD.
been selected.
Press CLEAR to cancel these functions before • The MP3 audio track/JPEG image file/DivX
playing a disc. video file you want to play is broken.
• Resume Play has been selected. • Data is not MPEG1 Audio Layer 3 data.
During stop, press x on the control unit or the • JPEG image file format does not conform to DCF.
remote and then start playback (page 50). • A JPEG image file has the extension “.JPG” or
• The title, DVD or PBC menu automatically “.JPEG,” but is not in JPEG format.
appears on the TV screen. • The file you want to play has the extension “.AVI”
or “.DIVX” but is not in DivX format, or is in
The system starts playing the disc
DivX format but does not conform to a DivX
automatically.
Certified profiles.
• The DVD features an auto playback function.
The system does not work normally.
Playback stops automatically.
• Disconnect the AC power cord (mains lead) from
• Some discs may contain an auto pause signal. the wall outlet (mains), then reconnect after
While playing such a disc, the system stops several minutes.
playback at the auto pause signal.
102GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
“DEMO PLAY” appears in the front panel

display. Self-diagnosis Function
• Contact your Sony dealer or local authorized Sony
service facility. (When letters/numbers appear in the
display)
The HDMI CONTROL function does not work.
• When “HDMI” does not light up in the front panel
When the self-diagnosis function is activated to
display, check the HDMI connection (page 21).
prevent the system from malfunctioning, a 5-
• Set the [HDMI CONTROL] setting in [CUSTOM
character service number (e.g., C 13 50) with a
SETUP] to [ON] (page 40, 93).
combination of a letter and 4 digits appears on
• Make sure that the connected component is
compatible with the HDMI CONTROL function.
the TV screen or the front panel display. In this
• Check that the AC power cord (mains lead) of the
case, check the following table.
connected component is connected securely.
• Check the connected component’s setting for the C:13:50
HDMI CONTROL function. See the operating
instructions of the component.
• If you change the HDMI connection, connect and
disconnect the AC power cord (mains lead), or
have a power failure, set the [HDMI CONTROL] First 3 Cause and/or corrective action
setting in [CUSTOM SETUP] to [OFF], then set characters of
the [HDMI CONTROL] setting in [CUSTOM the service
number
SETUP] to [ON] (page 40, 93).
• For details on the HDMI CONTROL function, see C 13 • The disc is dirty.
“Preparing for the HDMI CONTROL function” ,Clean the disc with a soft cloth
(page 40). (page 99).
• The disc is a format that the
No sound is output from the system and TV
system cannot play.
while using the System Audio Control
function. C 31 The disc is not inserted correctly.
• Make sure that the connected TV is compatible ,Restart the system, then re-insert
with the System Audio Control function. the disc correctly.
• For details on the System Audio Control function, E XX To prevent a malfunction, the
see “Enjoying the TV Sound from the Speakers in (xx is a number) system has performed the self-
this System” (page 43). diagnosis function.
• Check the connections. ,Contact your nearest Sony
dealer or local authorized Sony
service facility and give the 5-
character service number.
Example: E 61 10
continued
103GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
When displaying the version

number on the screen Specifications
When you turn on the system, the version
number [VER.X.XX] (X is a number) may Amplifier section
Power output (rated)
appear on the TV screen. Although this is not a
Front L / Front R (rated): 35 W + 35 W
malfunction and for Sony service use only, (at 10 ohms, 1 kHz, 1 %
normal system operation will not be possible. THD)
Turn off the system, and then turn on the system RMS output power (reference)
again to operate. Front L / Front R*: 50 W + 50 W
(at 10 ohms, 1 kHz, 10 %
VER.X.XX THD)
Center*: 50 W
(at 10 ohms, 1 kHz, 10 %
THD)
Surround L / Surround R*: 50 W + 50 W
(at 10 ohms, 1 kHz, 10 %
THD)
Subwoofer*: 100 W (at 4 ohms, 70 Hz,
10 % THD) + 100 W (at 4
ohms, 500 Hz, 10 % THD)
* Depending on the sound field settings and the source,

there may be no sound output.
Inputs (Analog)
TV (AUDIO IN) Sensitivity: 450/250 mV
Inputs (Digital)
SAT/CABLE (COAXIAL IN)
Impedance: 75 ohms
DVD system
Laser Semiconductor laser
(DVD: λ = 645 - 660 nm)
(CD: λ = 770 - 800 nm)
Emission duration:
continuous
Signal format system PAL/NTSC
Tuner section
System PLL quartz-locked digital
synthesizer
FM tuner section
Tuning range 87.5 – 108.0 MHz
(50 kHz step)
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range 531 – 1,602 kHz (with the
interval set at 9 kHz)
Antenna (aerial) AM loop antenna (aerial)
Intermediate frequency 450 kHz
104GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Video section
Outputs VIDEO: 1 Vp-p 75 ohms Glossary
COMPONENT:
Y: 1 Vp-p 75 ohms
Album
PB/CB, PR/CR: 0.7 Vp-p
75 ohms Section of a music piece or an image on a data
HDMI OUT: Type A (19 CD containing MP3 audio tracks or JPEG files.
pin) Chapter
Speakers Subdivision of a title on a DVD. A title is
Front/Center/Surround (SS-IS10) composed of several chapters.
Speaker system Full range speaker system
Speaker unit 35 mm Digital Cinema Auto Calibration
Rated impedance 10 ohms Digital Cinema Auto Calibration was developed
Dimensions (approx.) 45 × 55 × 40 mm (w/h/d) by Sony to automatically measure and adjusts
Mass (approx.) 0.07 kg the speaker settings to your listening
Speaker cords 4.5 m × 2, 3 m × 1, 12 m × environment in a short period of time.
2
DivX®
Subwoofer (SA-WSIS10)
Digital video technology created by DivX, Inc.
Speaker system 2 Way 2 Drivers
Subwoofer speaker system Videos encoded with DivX technology are
Speaker unit 120 mm + 160 mm among the highest quality with a relatively small
Rated impedance 4 ohms file size.
Dimensions (approx.) 190 × 450 × 450 mm
Dolby Digital
(w/h/d)
Mass (approx.) 13.5 kg This movie theater sound format is more
Power requirements 220 - 240 V AC, 50/60 Hz advanced than Dolby Surround Pro Logic. In
Power consumption On: 130 W this format, the surround speakers output stereo
Standby: 0.3 W (at the sound with an expanded frequency range, and a
Power Saving mode) subwoofer channel for deep bass is
Control unit (HCD-IS10) independently provided. This format is also
Dimensions (approx.) 215 × 105 × 207 mm called “5.1” with the subwoofer channel
(w/h/d) designed as the 0.1 channel (since it functions
Mass (approx.) 3.0 kg only when a deep bass effect is needed). All six
Power output channels in this format are recorded separately
(DIGITAL MEDIA PORT)DC OUT: 5 V, 700 mA for superior channel separation. Furthermore,
since all the signals are processed digitally, less
Design and specifications are subject to change
signal degradation occurs.
without notice.
Dolby Pro Logic II
• Standby power consumption 0.3 W (or Dolby Pro Logic II creates five full-bandwidth
less). output channels from 2 channel sources. This is
• Halogenated flame retardants are not done using an advanced, high-purity matrix
used in the printed wiring boards. surround decoder that extracts the spatial
• Over 85 % power efficiency of properties of the original recording without
amplifier block is achieved with the adding any new sounds or tonal colorations.
full digital amplifier, S-master.
• Halogenated flame retardants are not x Movie mode
used in the certain cabinets. The Movie mode is for use with stereo television
shows and all programs encoded in Dolby
Surround. The result is enhanced sound field
directionality that approaches the quality of
discrete 5.1-channel sound.
continued
105GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
x Music mode mode have the same format as a DVD VIDEO,

The Music mode is for use with any stereo music while discs created in VR (Video Recording)
recordings, and provides a wide and deep sound mode allow the contents to be programmed or
space. edited.
DTS File
Digital audio compression technology A JPEG image or a DivX video recorded on a
developed by DTS, Inc. This technology DATA CD/DATA DVD. (“File” is an exclusive
conforms to 5.1-channel surround. This format definition for this system.) A single file consists
comprises of stereo rear channel and there is of a single image or movie.
discrete subwoofer channel in this format. DTS
Film based software, Video based
provides the same 5.1 discrete channels of high
software
quality digital audio. The good channel
DVDs can be classified as film based or video
separation is realized due to the all channel data
based software. Film based DVDs contain the
being recorded discretely and processed in
same images (24 frames per second) that are
digitally.
shown at movie theaters. Video based DVDs,
DVD such as television dramas or sit-coms, displays
A disc that contains up to 8 hours of moving images at 30 frames (or 60 fields) per second.
pictures even though its diameter is the same as
HDMI (high-definition multimedia
a CD. interface)
The data capacity of a single-layer and single-
HDMI is an interface that supports both video
sided DVD, at 4.7 GB (Giga Byte), is 7 times
and audio on a single digital connection,
that of a CD. Furthermore, the data capacity of a
allowing you to enjoy high quality digital
dual-layer and single-sided DVD is 8.5 GB, a
picture and sound. The HDMI specification
single-layer and double-sided DVD 9.4 GB, and
supports HDCP (high-bandwidth digital
a dual-layer and double-sided DVD 17 GB.
contents protection), a copy protection
The picture data uses the MPEG 2 format, one of
technology that incorporates coding technology
a worldwide standard of digital compression
for digital video signals.
technology. The picture data is compressed to
about 1/40 of its original size. The DVD also Mica-reinforced-cellular-diaphragm
uses the variable rate coding technology that The Mica-reinforced-cellular-diaphragm is
processes allocated data according to the status made of a light weight and highly rigid
of the picture. composite material that consists of Mica flake
The audio data is recorded in Dolby Digital as and synthetic fiber.
well as in PCM, allowing you to enjoy more It is constructed with layers of Mica flake. This
realistic audio presence. construction realizes diaphragm with low
Furthermore, various advanced functions such density and high rigidity at the same time.
as the multi-angle, multilingual, and Parental In this system, a Mica-reinforced-cellular-
Control functions are provided with the DVD. diaphragm is used for the subwoofer.
DVD+RW MPEG audio
A DVD+RW (plus RW) is a recordable and A coding system to compress digital audio
rewritable disc. DVD+RWs use a recording signals. MPEG-1 is used for MP3 (MPEG-1
format that is comparable to the DVD VIDEO Audio Layer-3). MPEG-2 is used for one of the
format. audio format of DVD.
DVD-RW Multi-angle function
A DVD-RW is a recordable and rewritable disc Various angles of a scene, or viewpoints of the
that is the same size as a DVD VIDEO. The video camera are recorded on some DVDs.
DVD-RW has two different modes: VR mode
and Video mode. DVD-RWs created in Video
106GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Multilingual function original sound. The compact amplifier section

Several languages for the sound or subtitles in a supports a higher power efficiency and
picture are recorded on some DVDs. improved thermal performance.
Parental Control Scene
A DVD function to limit playback of the disc by On a VIDEO CD with PBC (playback control)
users of a predetermined age according to the functions, the menu screens, moving pictures
limitation level in each country. The limitation and still pictures are divided into sections called
varies from disc to disc; when it is activated, “scenes.”
playback is completely prohibited, violent Title
scenes are skipped or replaced with other scenes,
The longest section of a picture or music feature
etc.
on a DVD, movie, etc., in video software, or the
PCM (Pulse Code Modulation) entire album in audio software.
A method for converting analog audio to digital Track
audio. It is used for the Compact Disc (CD)
Section of a picture or a music piece on a
audio format.
VIDEO CD, CD, or MP3. An album is
Playback Control (PBC) composed of several tracks (MP3 only).
Signals encoded on VIDEO CDs (Version 2.0) VIDEO CD
to control playback.
A compact disc that contains moving pictures.
By using menu screens recorded on VIDEO
The picture data uses the MPEG 1 format, one of
CDs with PBC functions, you can enjoy playing
a worldwide standard of digital compression
simple interactive programs, programs with
technology. The picture data is compressed to
search functions, and so on.
about 1/140 of its original size. Consequently, a
Progressive format 12 cm VIDEO CD can contain up to 74 minutes
(sequential scanning) of moving pictures.
In contrast to the Interlace format, the VIDEO CDs also contain compact audio data.
progressive format can reproduce 50 - 60 frames Sounds outside the range of human hearing are
per second by reproducing all scanning lines compressed while sounds we can hear are not
(525 lines for the NTSC system, 625 lines for the compressed. VIDEO CDs can hold six times the
PAL system). The overall picture quality audio information of conventional audio CDs.
increases and still images, text and horizontal There are two versions of VIDEO CDs.
lines appear sharper. • Version 1.1: You can play only moving
Region Code pictures and sounds.
This system is used to protect copyrights. A • Version 2.0: You can play high-resolution still
region number is allocated on each DVD system pictures and enjoy PBC functions.
or DVD disc according to the sales region. Each This system conforms to both versions.
region code is shown on the system as well as on
the disc packaging. The system can play discs
that match its region code. The system can also
play discs with the “ ” mark. Even when the
ALL
region code is not shown on the DVD, the region

limit may still apply.
S-master
S-master is an all-digital amplifier technology
developed by Sony, which effectively
minimizes the occurrence of sound
fragmentation and jitter, delivering superb
dialog clarity and faithful reproduction of the
107GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Language Code List

The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language Code Language Code Language Code Language

1027 Afar 1183 Irish 1347 Maori 1507 Samoan
1028 Abkhazian 1186 Scots Gaelic 1349 Macedonian 1508 Shona
1032 Afrikaans 1194 Galician 1350 Malayalam 1509 Somali
1039 Amharic 1196 Guarani 1352 Mongolian 1511 Albanian
1044 Arabic 1203 Gujarati 1353 Moldavian 1512 Serbian
1045 Assamese 1209 Hausa 1356 Marathi 1513 Siswati
1051 Aymara 1217 Hindi 1357 Malay 1514 Sesotho
1052 Azerbaijani 1226 Croatian 1358 Maltese 1515 Sundanese
1053 Bashkir 1229 Hungarian 1363 Burmese 1516 Swedish
1057 Byelorussian 1233 Armenian 1365 Nauru 1517 Swahili
1059 Bulgarian 1235 Interlingua 1369 Nepali 1521 Tamil
1060 Bihari 1239 Interlingue 1376 Dutch 1525 Telugu
1061 Bislama 1245 Inupiak 1379 Norwegian 1527 Tajik
1066 Bengali; 1248 Indonesian 1393 Occitan 1528 Thai
Bangla 1253 Icelandic 1403 (Afan)Oromo 1529 Tigrinya
1067 Tibetan 1254 Italian 1408 Oriya 1531 Turkmen
1070 Breton 1257 Hebrew 1417 Punjabi 1532 Tagalog
1079 Catalan 1261 Japanese 1428 Polish 1534 Setswana
1093 Corsican 1269 Yiddish 1435 Pashto; 1535 Tonga
1097 Czech 1283 Javanese Pushto 1538 Turkish
1103 Welsh 1287 Georgian 1436 Portuguese 1539 Tsonga
1105 Danish 1297 Kazakh 1463 Quechua 1540 Tatar
1109 German 1298 Greenlandic 1481 Rhaeto- 1543 Twi
1130 Bhutani 1299 Cambodian Romance 1557 Ukrainian
1142 Greek 1300 Kannada 1482 Kirundi 1564 Urdu
1144 English 1301 Korean 1483 Romanian 1572 Uzbek
1145 Esperanto 1305 Kashmiri 1489 Russian 1581 Vietnamese
1149 Spanish 1307 Kurdish 1491 Kinyarwanda 1587 Volapük
1150 Estonian 1311 Kirghiz 1495 Sanskrit 1613 Wolof
1151 Basque 1313 Latin 1498 Sindhi 1632 Xhosa
1157 Persian 1326 Lingala 1501 Sangho 1665 Yoruba
1165 Finnish 1327 Laothian 1502 Serbo- 1684 Chinese
1166 Fiji 1332 Lithuanian Croatian 1697 Zulu
1171 Faroese 1334 Latvian; 1503 Singhalese
1174 French Lettish 1505 Slovak
1181 Frisian 1345 Malagasy 1506 Slovenian 1703 Not specified
Parental Control Area Code List
Code Area Code Area Code Area Code Area

2044 Argentina 2165 Finland 2362 Mexico 2149 Spain
2047 Australia 2174 France 2376 Netherlands 2499 Sweden
2046 Austria 2109 Germany 2390 New Zealand 2086 Switzerland
2057 Belgium 2248 India 2379 Norway 2528 Thailand
2070 Brazil 2238 Indonesia 2427 Pakistan 2184 United
2079 Canada 2254 Italy 2424 Philippines Kingdom
2090 Chile 2276 Japan 2436 Portugal
2092 China 2304 Korea 2489 Russia
2115 Denmark 2363 Malaysia 2501 Singapore
108GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Index to Parts and Controls

For more information, refer to the pages indicated in parentheses.
Control unit (front panel)
FUNCTION VOLUME
A Soft-touch buttons (N/x/FUNCTION/ D [/1 (on/standby) (30)
VOLUME –/+) (30) E Disc slot (30)
B Remote sensor (8) F Z (eject) (30)
C Front panel display (111)
continued
109GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Control unit (rear panel)
DMPORT
A AM terminals (12) F SAT/CABLE (DIGITAL IN COAXIAL)

B TV (AUDIO IN) jacks (17) jack (24)
C HDMI OUT jack (21) G VIDEO OUT (VIDEO) jack (17, 21)
D ECM-AC2 jack (18, 85) H VIDEO OUT (COMPONENT) jacks (21)
E TV (DIGITAL IN OPTICAL) jack (23) I Ventilation slots
J DMPORT jack (24, 80)
K FM 75Ω COAXIAL jack (12)
110GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Front Panel Display

About the indications in the front panel display
SLEEP NIGHT TUNED TITLE CHAP STEREO MONO MOVIE MUSIC NTSC
CD
REPEAT 1
DIGITAL PROGRESSIVE
A Lights up when the sleep timer is set. I Lights up when the HDMI OUT jack is
(78) correctly connected to HDCP (high-
B Lights up when the night mode is on. bandwidth digital content protection)
(77) compliant device with HDMI or DVI
(digital visual interface) input. (21)
C Lights up when a station is received.
(Radio only) (71) J Current repeat mode (54)
D Lights up when the time information of K Lights up when the system outputs
a title or chapter appears in the front progressive signals (DVD function
panel display. (DVD only) (58) only). (91)
E Stereo/Monaural effect (Radio only) L Lights up when a disc is loaded (DVD
(72) function only).
F Lights up when the movie or music M Displays system’s status such as
mode is selected. (36) chapter, title, or track number, time
G Current surround format (Except for information, radio frequency, playing
status, sound field, etc.
JPEG)
N Playing status (DVD function only)
H Lights up when an NTSC disc is
loaded. O Current surround format (Except for
JPEG)
P Lights up when a CD or a DATA CD is
loaded.
continued
111GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Subwoofer
Bottom of the subwoofer
A Ventilation slots
B SYSTEM CONTROL jack (12)
C SPEAKER jacks (12)
112GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Remote control
M (30)
c/C STEP (47)
N m/M (47)
/ (47)
TUNING –/+ (71)
O REPEAT (54)
P VOLUME +/–3) (30, 72, 76)
Q MUTING (30)
R AUDIO2) (55, 77)
S PICTURE NAVI (49)
T MOVIE/MUSIC (36)
U RESOLUTION (91)
V DIRECT TUNING (72)
W TUNER MENU (71, 119)
X [/1 (on/standby) (18, 30, 50)
Y DISPLAY (58, 72)
Z TV INPUT (76)
wj ENTER1) 3) (18, 34, 38, 40, 48, 71, 76, 82)
wk SOUND FIELD (35, 37)
wl DVD MENU (55)
TOOLS3) (76)
e; DISPLAY (18, 40, 48, 82, 114)
TV MENU3) (76)
ea H (play)2) (30, 42, 47)
es x (stop) (30, 50, 82)
ed X (pause) (30)
ef TV CH +/–2) (76)
eg SUBTITLE (61)
A TV [/1 (on/standby) (76) eh ANGLE (61)
B TV button/TV mode indicator (76) ej NIGHT (77)
C Z (eject) (30) ek DIMMER (78)
D SLEEP (78) el SYSTEM MENU (34, 79, 119)
E Number buttons2) 3) (48, 76, 82) 1) The ENTER wj button is the same function as the
F CLEAR (48) (ENTER) 0 button.

-/--3) (76) 2)
The 5, H, TV CH +, and AUDIO buttons have
G TONE (38) tactile dots. Use the tactile dots as references when
H FUNCTION (30, 71, 80, 85) operating the system.
3) These buttons change to the TV operation buttons
I DVD TOP MENU (55)
when the remote is in TV mode. The remote is in TV
J C/X/x/c, (ENTER)3) (18, 34, 38, 40, 48,
mode when the TV mode indicator 2 lights up by
71, 76, 82)
pressing the TV button 2.
K O RETURN3) (50, 76)
L ./> (30)
PRESET –/+ (72)
113GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
Guide to the Control Menu Display
DISPLAY
Use the Control Menu display to select a function and to view related information. Press DISPLAY
repeatedly to turn on or change the Control Menu display as follows:
, Control Menu display 1

m
Control Menu display 2 (appears for certain discs only)
m
Control Menu display off
Control Menu display

The Control Menu display 1 and 2 will show different items depending on the disc type. For details
about each item, see the pages in parentheses.
Example: Control Menu display 1 when playing a DVD VIDEO.
114GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
Currently playing title number1)
Currently playing chapter number2)
Total number of titles1)

Playback status
Total number of chapters2) (N Playback,
Control Menu items X Pause,
x Stop, etc.)
12 (27)
Type of disc being
18 (34) DVD VIDEO played3)
T 1:32:55
Playing time4)
Selected item OFF
OFF Current setting
DISC
Options
TITLE
CHAPTER
Function name of
selected Control REPEAT
Menu item ENTER Quit: DISPLAY
Operation message
1) Displaysthe scene number for VIDEO CDs (PBC is on), track number for VIDEO CDs/CDs, album number for
DATA CDs/DATA DVDs. DivX video album number for DATA CDs/DATA DVDs.
2)
Displays the index number for VIDEO CDs, MP3 audio track number, or JPEG image file number for DATA CDs/
DATA DVDs. DivX video file number for DATA CDs/DATA DVDs.
3)
Displays Super VCD as “SVCD.” Displays “MP3” in the Control Menu display 1 or “JPEG” in the Control Menu
display 2 for DATA CDs/DATA DVDs.
4)Displays the date for JPEG files.
To turn off the display

Press DISPLAY.
List of Control Menu items
Item Item Name, Function, Relevant Disc Type

[TITLE] (page 48)/[SCENE] (page 48)/[TRACK] (page 48)
Selects the title, scene, or track to be played.
[CHAPTER] (page 48)/[INDEX] (page 48)
Selects the chapter or index to be played.
[TRACK] (page 48)
Selects the track to be played.
[ORIGINAL/PLAY LIST] (page 57)
Selects the type of titles (DVD-R/DVD-RW) to be played, the [ORIGINAL] one, or an edited
[PLAY LIST].
[TIME/TEXT] (page 48)
Checks the elapsed time and the remaining playback time.
Input the time code for picture and music searching.
Displays the DVD/CD text or the MP3 track name.
continued
115GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
[AUTO CALIBRATION] (page 85)

Adjust the level of each speaker automatically.
[PROGRAM] (page 51)

Selects the track to play in the order you want.
[SHUFFLE] (page 53)
Plays the track in random order.
[REPEAT] (page 54)
Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/track/album
repeatedly.
[PARENTAL CONTROL] (page 82)
Sets to prohibit playback on this system.
[SETUP] (page 88)

[QUICK] Setup (page 18)
Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of
the TV, choose [YES] or [NO] to start the [AUTO CALIBRATION].
[CUSTOM] Setup
In addition to the Quick Setup setting, you can adjust various other settings.
[RESET]
Returns the settings in [SETUP] to the default setting.
[ALBUM] (page 48)

Selects the album to be played.
[FILE] (page 48)
Selects the JPEG image file or DivX video file* to be played.
* [DATE] (page 60)
Displays the date the picture was taken by a digital camera.
* [INTERVAL] (page 67)
Specifies the duration for which the slides are displayed on the TV screen.
* [EFFECT] (page 67)
Selects the effects to be used for changing slides during a slide show.
* [MODE (MP3, JPEG)] (page 66)
Selects the data type; MP3 audio track (AUDIO), JPEG image file (IMAGE) or both (AUTO)
to be played when playing a DATA CD/DATA DVD.
* These items are not displayed when playing a DATA CD/DATA DVD with DivX video file.
Tip
• The Control Menu icon indicator lights up in green t when you select any item except [OFF]
([PROGRAM], [SHUFFLE], and [REPEAT] only). The [ORIGINAL/PLAY LIST] indicator lights up in green
when you select [PLAY LIST] (default setting).
116GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
DVD Setup Display List

You can set the following items with the DVD Setup Display.
The order of the displayed items may be different from the actual display.
LANGUAGE SETUP SCREEN SETUP
OSD* TV TYPE 16:9
4:3 LETTER
MENU*
BOX
AUDIO* 4:3 PAN SCAN
SUBTITLE*
YCBCR/RGB (HDMI) YCBCR
RGB
SCREEN SAVER ON
OFF
BACKGROUND JACKET
PICTURE
GRAPHICS
BLUE
BLACK
4:3 OUTPUT FULL
NORMAL
* Select the language you want to use from the displayed language list.
continued
117GB

[3-212-589-31(1)]
masterpage:Left
specdef v20060111
CUSTOM SETUP SPEAKER SETUP

HDMI OFF CONNECTION FRONT YES
CONTROL ON CENTER YES
STB OFF NONE
SYNCHRO ON SURROUND YES
NONE
DIGITAL IN TV t OPT, SAT/CABLE t COAX
SUBWOOFER YES
TV t COAX, SAT/CABLE t OPT
DISTANCE L 0.0 – 7.0 m
PAUSE AUTO
(FRONT) R 0.0 – 7.0 m
MODE FRAME
CENTER 0.0 – 7.0 m
TRACK OFF 0.0 – 7.0 m
SUBWOOFER
SELECTION AUTO
MULTI-DISC ON DISTANCE L 0.0 – 7.0 m
RESUME OFF (SURROUND) R 0.0 – 7.0 m
AUDIO DRC OFF
STANDARD LEVEL L –6.0 dB – +6.0 dB
MAX (FRONT) R –6.0 dB – +6.0 dB
CENTER –6.0 dB – +6.0 dB
AUDIO OFF
SUBWOOFER –6.0 dB – +6.0 dB
(HDMI) ON
LEVEL L –6.0 dB – +6.0 dB
DivX
(SURROUND) R –6.0 dB – +6.0 dB
TEST TONE OFF
ON
118GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
System Menu List

You can set the following items with SYSTEM MENU on the remote.
System menu
A/V SYNC LONG
SHORT
OFF
ATTENUATE* ATT ON
ATT OFF
ILLUM MODE STANDARD
SIMPLE
INFO MODE STANDARD
SIMPLE
* “ATTENUATE” appears only when the function is set to the “TV” function.
Tuner Menu List

You can set the following items with TUNER MENU on the remote.
Tuner menu
Memory?
FM Mode?* STEREO
MONO
Name In?**
* “FM Mode?” appears only when the function is set to the “FM” function.
** “Name In?” does not appear when the system is receiving an RDS broadcast (page 74).
119GB

[3-212-589-31(1)]
filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb02regIX.fm]
masterpage:Left
specdef v20060111
Index
Numerics DVD 106 MENU 89
DVD+RW 106 Mica-reinforced-cellular-
16:9 90
DVD’s menu 55 diaphragm 106
4:3 LETTER BOX 90
DVD-RW 57, 106 MIDDLE 38
4:3 OUTPUT 91
DVI 22 MODE (MP3, JPEG) 66
4:3 PAN SCAN 90
MOVIE/MUSIC 36
5.1 Channel Surround 56 E MP3 62, 64
A EFFECT 67 MPEG audio 106
Multi Session CD 7
A/V SYNC 62 F Multi-angle function 61, 106
ALBUM 48
Fast forward 47 MULTI-DISC RESUME 94
Album 105
Fast reverse 47 Multilingual function 107
ANGLE 61
FILE 48 Multiplex broadcast sound 77
ATTENUATE 34
File 106 MUTING 32
AUDIO 89
AUDIO (HDMI) 94 Film based software 106
FM Mode 72 N
AUDIO DRC 94
Freeze Frame 47 Naming preset stations 73
Auto Calibration 85, 105
Front panel display 58, 111 NIGHT 77
B NIGHT MODE 77
H
BACKGROUND 90 O
BASS 38 Handling discs 99
HDMI OMNI-DIRECTIONAL
Batteries 8
YCBCR/RGB (HDMI) 90 SOUND 38
C HDMI (high-definition ORIGINAL 57
multimedia interface) 22, 106 OSD 89
CHAPTER 48
HDMI CONTROL 39, 93
Chapter 105 P
Continuous play 30 I PARENTAL CONTROL 83
Control Menu Display 114
ILLUMINATION MODE 79 Parental Control 107
Control unit 109
INDEX 48 PAUSE MODE 93
Controlling the TV 75
INFORMATION MODE 79 PBC Playback 70
CUSTOM 88
Installing the speakers on a wall PCM (Pulse Code Modulation)
CUSTOM PARENTAL
26 107
CONTROL 82
Instant advance 32 PICTURE NAVI 49, 65
CUSTOM SETUP 93
Instant replay 32 PLAY LIST 57
D INTERLACE 92 Playback Control (PBC) 107
INTERVAL 67 Program Play 51
D. C. A. C. 85, 105
PROGRESSIVE 92
DATA CD 64, 68 J Progressive format 91, 107
DATA DVD 64, 68
Digital Cinema Auto JPEG 62, 64
Q
Calibration 85, 105
Digital connection 25
L Quick Setup 18
DIGITAL IN 93 Language Code List 108
LANGUAGE SETUP 89 R
DIGITAL MEDIA PORT 80
DIMMER 78 Listening Radio 72
DISPLAY 73 a particular point 47 Radio Stations 71
DivX® 68, 94, 105 other components 33 RDS 74
Dolby Digital 55, 105 TV sound 35 Region Code 7, 107
Dolby Pro Logic II 105 Remote 8, 75, 113
DTS 55, 106
M Repeat Play 54
DUAL MONO 77 Memory Clear 97 RESET 97
Resume Play 50
120GB

[3-212-589-31(1)]
masterpage:Right
specdef v20060111
S
Scan 47
SCENE 48
Scene 107
SCREEN SAVER 90
SCREEN SETUP 90
SETUP 88
Setup Display 88, 117
Shuffle Play 53
SLEEP 78
Slide Show 66
Slow-motion Play 47
S-master 107
Soft-touch button 30
Sound Field 37
SPEAKER SETUP 94
CONNECTION 94
DISTANCE 95
LEVEL 95, 96
STB SYNCHRO 93
SUBTITLE 61, 89
Subwoofer 112
SYSTEM MENU 34, 62, 79
System menu list 119
T
TEST TONE 96
TIME/TEXT 48
TITLE 48
Title 107
TRACK 48
Track 107
TRACK SELECTION 93
TREBLE 38
Troubleshooting 99
Tuner menu list 119
TV connection 21
TV TYPE 90
U
Unpacking 8
Usable discs 5
V
Video based software 106
VIDEO CD 107
121GB

[3-212-589-31(1)]
masterpage:None Left
model name1[DAV2007]
[3-212-589-31(1)]
masterpage:None Right
model name1[DAV2007]
[3-212-589-31(1)]

Sony Dav-Is10 Manual PDF

Uploaded by

Copyright:

Available Formats

Sony Dav-Is10 Manual PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sony Dav-Is10 Manual PDF

Uploaded by

Copyright:

Available Formats

3-212-589-31(1)

DVD Home Theatre System

model name [DAV-IS10]

model name [DAV-IS10]

Tuner Functions Additional Information

model name [DAV-IS10]

About This Manual This System Can Play the

Symbol Meaning DVD+RW/

1)MP3 (MPEG1 Audio Layer 3) is a standard format

model name [DAV-IS10]

• An adapter to convert an 8 cm disc to standard

model name [DAV-IS10]

Note on DualDiscs operating instructions supplied with the DVDs

DVD VIDEOs labeled ALL will also play on this

Note on playback operations

model name [DAV-IS10]

Getting Started – BASIC –

Inserting batteries into the remote

model name [DAV-IS10]

Step 1: Positioning the Using the subwoofer

Getting Started – BASIC –

Place speakers and subwoofer as illustrated

2 Front speaker (R)

Surround speaker (L) Surround speaker (R)

model name [DAV-IS10]

• Do not place the subwoofer under a desk or in a

model name [DAV-IS10]

Note on handling the subwoofer

Getting Started – BASIC –

model name [DAV-IS10]

Step 2: Connecting the System

The following is the basic connection of the system.

2 Front 2 Center speaker 2 Front

3 AM loop antenna (aerial) Rear of the control unit

SYSTEM CONTROL ONLY FOR HCD-IS10

SPEAKER ONLY FOR SS-IS10

FRONT R FRONT L SUR R SUR L CENTER

Subwoofer 4 AC power cord

model name [DAV-IS10]

1 Connecting the Control unit

Getting Started – BASIC –

Bottom of the subwoofer

SYSTEM CONTROL ONLY FOR HCD-IS10

SPEAKER ONLY FOR SS-IS10

FRONT R FRONT L SUR R SUR L CENTER

SYSTEM CONTROL cord

model name [DAV-IS10]

2 Connecting the Speakers

Front speaker (R) Front speaker (L) Center speaker

SYSTEM CONTROL ONLY FOR HCD-IS10

SPEAKER ONLY FOR SS-IS10

FRONT R FRONT L SUR R SUR L CENTER

Surround speaker (R) Surround speaker (L)

3 Connecting the Antenna (Aerial)

model name [DAV-IS10]

3 Connect the cords to the AM antenna (aerial) terminals.

Getting Started – BASIC –

Insert until this

To connect the FM wire antenna (aerial)