Unit Eng PDF
Unit Eng PDF
SAMWHA CAPACITOR
Low Voltage Power Capacitor
( Unit Type )
Capacitor benefits to
Authorized Dealer :
SAMWHA CAPACITOR CO.,LTD.
www.samwha.com , www.samwha.co.th
Company Profile
SAMWHA CAPACITOR CO.,LTD. Was established in 1956. The factory is located in Yongin
in Korea. Since our humble beginning in 1956, we have steadily grown to become the sole
general manufacturer of Capacitors in Korea. During the past half‐century, Samwha
Capacitor has been providing High & Low Voltage Power Capacitors to the customers
including overseas customers.
Product Certification
Low Voltage Power Capacitor – Dry (Unit type)
The power range varies from 2.5 to 75kVar , depending on a three‐phase or single‐
phase capacitor design. Samwha dry type capacitor is especially intended for power factor
correction in industrial and semi‐industrial application. The capacitors are manufactured
using metalized polypropylene film as the dielectric and housed in a cylindrical aluminum
case. The three‐phase capacitor is composed of the single‐phase element stacks. The
electrodes are connected by metal spraying the face ends of the winding elements. The
winding elements are encapsulated in cylindrical aluminum case hermetically sealed either
by a press‐rolled metal lid. Taken to be parallel to the desired value. And packed into a
metal body again to facilitate application deployment.
PRODUCT SCOPE
Type : Dry type (Unit type)
Voltage Range : 220V to 1,000V
Frequency : 50Hz , 60Hz
Power Range : 5Kvar to 75Kvar
Capacitor Loss : Total 0.45W/Kvar
Capacity Tolerance : ‐5% ~ 10% (at 20oC)
Max Overvoltage : Un + 10% [up to 8 hours daily]
Un + 15% [up to 30 mins daily]
Un + 20% [up to 5 mins monthly]
Un + 30% [up to 1 mins monthly]
Max Overcurrent : 1.3 x In
Withstand Voltage : 2.15 x Un (10 seconds)
Connection : 3 Phase (Single phase on request)
Insulation level : 3/15Kv
Dielectric : Polypropylene
Ambient Temp : ‐25oC ~ 55oC
Discharge : External discharge module
Cooling : Natural forced
Impregnation : Epoxy resin
Safety : Self‐healing technology
Overpressure disconnector
Installation Place : Indoor
Applicable Standards : IEC60831‐1,2
CHARACTERISTICS OF DIELECTRIC
OPERATING CONDITION POLYPROPYLENT METALIZED
‐‐> S=temp.[0C]
TORN‐OFF CONDITION
‐‐> t=time.(hour)
‐‐> S=temp.[0C]
LOW VOLTAGE POWER CAPACITOR DRY TYPE ( UNIT )
DIMENSIONS
TYPE W H D STUD
CDU-S 185 320 155 M6
CDU-M 355 400 155 M8
CDU-L 355 400 230 M10
UNIT : mm.
Temperature class of capacitors (IEC 60831‐1)
Temperature class Ambient Temperature
Maximum Average
Category Maximum
For 24 hours For 1 year
B 45oC 35oC 25oC
C 50oC 40oC 30oC
o
D 55 C 45oC 35oC
Global Network (www.samwha.com)
Overseas Branches