Gear Cover Lower 2

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

9/1/2019 QuickServe Online | (4022250) ISX15 CM2250 Service Manual

(/qs3/pubsys2/xml/en/manual/4022250/4022250-titlepage.html)

Install
Note : The two M12 capscrews support the fuel pump
and air compressor respectively.
Install the lower gear cover with the three M8 capscrews, one
hex nut, and two M12 capscrews hand-tight, while holding the
cover in place.

Tighten the three M8 capscrews and one hex nut.


Torque Value: 20 n•m [ 177 in-lb ]
Tighten the two M12 capscrews.
Torque Value: 81 n•m [ 60 ft-lb ]

Install and tighten the two M8 capscrews, holding the


crankshaft position sensor wiring onto the lower gear cover.
Torque Value: 20 n•m [ 177 in-lb ]

Last Modified: 27-Feb-2015

https://quickserve.cummins.com/qs3/portal/service/manual/en/4022250/ 1/2
9/1/2019 QuickServe Online | (4022250) ISX15 CM2250 Service Manual

https://quickserve.cummins.com/qs3/portal/service/manual/en/4022250/ 2/2

You might also like