Scribd
Upload
96 views1 page

A10 DSP Ecm

This document is a past exam paper for a Digital Signal Processing course. It contains 10 short answer questions in Part A worth 20 marks total, and 5 long answer questions in Part B worth 50 marks total. The long answer questions cover topics such as properties of the discrete Fourier transform, implementation of the FFT algorithm, z-transforms, filter design techniques, multirate signal processing, and impulse responses of systems.

Uploaded by

Shashank Sai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
96 views1 page

A10 DSP Ecm

This document is a past exam paper for a Digital Signal Processing course. It contains 10 short answer questions in Part A worth 20 marks total, and 5 long answer questions in Part B worth 50 marks total. The long answer questions cover topics such as properties of the discrete Fourier transform, implementation of the FFT algorithm, z-transforms, filter design techniques, multirate signal processing, and impulse responses of systems.

Uploaded by

Shashank Sai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Sreenidhi Institute of Science & Technology A10

(An Autonomous Institution)


Code No: 101EC15/111EC15
B. TECH. III – Year II – Semester Examinations, January 2015 (Supplementary)
DIGITAL SIGNAL PROCESSING (ECM)
Time: 3 Hours Max. Marks: 70

Note: No additional answer sheets will be provided.


Part - A
Max.Marks:20
ANSWER ALL QUESTIONS.
1. Check whether the given system is stable or unstable? y(n)= ncosx(n) .
2. Determine the convolution sum of the two sequences. x(n)={4,3,2,1}, h(n)={1,2,1,2}.
3. Compare the radix-2 DIT-FFT and DIF-FFT?
4. What is the relation between discrete-time Fourier transform and Z -Transform?
5. What is meant by pre warping?
6. What are the advantages of multirate digital signal processing?
7. Compute the 4-point DFT of the sequence x(n)={1, -3, 2, -1}
8. Calculate no. of complex additions and multiplications in 256-point DFT using FFT?
9. Explain the Gibb’s phenomenon?
10. Find the Z- Transform of the sequence. x(n)= {1, 2, -3, 0, 4, 2, 1, 2, 5}.

Part – B
Max.Marks:50
ANSWER ANY FIVE QUESTIONS. EACH QUESTION CARRIES 10 MARKS.
1. Determine whether the following systems are (i) linear/non linear (ii) time Variant/time invariant?
(a) y(n)= n2x(n) (b) y(n)= x(n) x(n-2).

2. (a) List the properties of DFT and prove any 3 properties of DFT. [6M]
(b) x(n)={1, 2, 3, 4} & h(n)={1, 2, 2, 1}. Find y(n) by using circular convolution. [4M]

3. (a) Find 4-point DFT of a sequence x(n)={2,2,1,1} using DIF-FFT algorithm. [4M]
(b) Explain Radix-2 DIT-FFT algorithm. [6M]

4. (a) Find the inverse Z-Transform of X(Z)= Z-1 /(3–4Z-1 +Z-2) ROC: │Z│ > 1
(b) Obtain the direct form-II of the following system
y(n)= –3/8 y(n-1) +3/32 y(n-2) + 1/64 y(n-3)+ x(n) + 3x(n-1) + 2x(n-2)?

5 (a) Compare the Butterworth and Chebyshev filters.


(b) Apply the Bilinear transformation to Hd(s)= 4/(s+3)(s+4), with T= 0.5 sec. Find H(Z).

6. Design a high filter using Hamming window, with a cut off frequency of 1.2 rad/sec and N=9.

7 (a) Discuss sampling rate convertion by the factor I/D with the help of neat diagram.
(b) What are Multirate systems? Discuss their importance in real time processing of signals.

8 (a) Find the Impulse response for the following system


y(n) – 3/4 y(n-1) + 1/8 y(n-2) = x(n) + 1/3 x(n-1).
(b) Compare IIR and FIR filters.
-- 00 -- 00 --
Page 1 of 1

You might also like