Scribd Logo
Upload

Welcome to Scribd!

  • 100 views

    Software Upgrade Procedure

    Uploaded by

    jorgeizapata
    This document provides a procedure for upgrading software on AGS20 equipment. It involves downloading a new boot firmware if needed, then downloading a new system version. Care must be taken not to interrupt the boot download. A restart is required after boot download and a bench switch after system download.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Software Upgrade Procedure

    Uploaded by

    jorgeizapata
    100 views4 pages
    This document provides a procedure for upgrading software on AGS20 equipment. It involves downloading a new boot firmware if needed, then downloading a new system version. Care must be taken not to interrupt the boot download. A restart is required after boot download and a bench switch after system download.

    Original Description:

    Software Upgrade Procedure SIAE

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a procedure for upgrading software on AGS20 equipment. It involves downloading a new boot firmware if needed, then downloading a new system version. Care must be taken not to interrupt the boot download. A restart is required after boot download and a bench switch after system download.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    100 views4 pages

    Software Upgrade Procedure

    Uploaded by

    jorgeizapata
    This document provides a procedure for upgrading software on AGS20 equipment. It involves downloading a new boot firmware if needed, then downloading a new system version. Care must be taken not to interrupt the boot download. A restart is required after boot download and a bench switch after system download.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    SIAE MICROELETTRONICA

    HEADQUARTERS
    VIA MICHELANGELO BUONARROTI, 1
    20093 COLOGNO MONZESE MILANO – ITALY
    TEL. +39 0227325.1
    FAX +39 0225391585

    Software upgrade procedure

    11/02/2013
    1. SCOPE ................................................................................................................................. 3
    2. TOOLS NEEDED ................................................................................................................ 3
    3. WARNINGS ......................................................................................................................... 3
    4. PROCEDURE ...................................................................................................................... 3
    4.1 BOOT DOWNLOAD....................................................................................................................... 3
    4.2 SYSTEM VERSION DOWNLOAD ................................................................................................... 4

    AGS20 Software Upgrade

    SIAE MICROELETTRONICA Proprietary and Confidential. All rights reserved. The copyright of this document is the
    property of SIAE MICROELETTRONICA. No part of this document may be copied, reprinted or reproduced in any material
    Page 2 of 4 form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA. Further, the contents of this
    document or the methods or techniques contained therein must not be disclosed to any person.
    1. SCOPE

    Scope of this document is to provide a procedure that describes, step by step, how to perform
    the software upgrade of AGS20 equipment.

    2. TOOLS NEEDED

    A PC equipped with the SCT or WebLCT Console (WLC) software

    Software version folders:

    • bin (containing the system version)

    • boot_e82115_xxyyzz (containing the boot firmware version xx.yy.zz)

    The above mentioned version folders are contained in the distributed N31030-01 XXX.zip file
    (where XXX varies depending on the distributed version).

    3. WARNINGS

    Before proceeding with the upgrade, the running boot version shall be verified against the one
    provided. If the running version is lower than the provided one, a boot download must be
    performed before upgrading the system version. If the running version is equal to the one
    provided, the boot download must not be performed.

    During the boot firmware download, the connection to the equipment must not be
    interrupted.

    4. PROCEDURE

    4.1 Boot Download


    Follow the steps below to perform the boot software upgrade of AGS20 equipment.
    1. Unzip files N31030-01 XXX.zip in a suitable directory of the PC used to perform the
    upgrade.
    2. Connect to the equipment using the SCT or the WebLCT (login as 'System').
    3. Open the Software Download window.
    4. Select the file E82115.dwl (boot firmware) from the directory boot_e82115_xxyyzz.
    5. Select "Only difference or not present/peripheral" as download mode.

    AGS20 Software Upgrade

    SIAE MICROELETTRONICA Proprietary and Confidential. All rights reserved. The copyright of this document is the
    property of SIAE MICROELETTRONICA. No part of this document may be copied, reprinted or reproduced in any material
    Page 3 of 4 form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA. Further, the contents of this
    document or the methods or techniques contained therein must not be disclosed to any person.
    6. Start the download and confirm by clicking on the window that pops-up.
    7. At the end of the boot firmware download, the equipment Controller will automatically
    restart. Wait for the restart to be completed.
    4.2 System Version Download
    1. Unzip files N31030-01 XXX.zip in a suitable directory of the PC used to perform the
    upgrade.
    2. Connect to the equipment using the SCT or the WebLCT (login as 'System').
    3. Open the Software Download window.
    4. Select the file N31030.dwl (system version) from the directory bin.
    5. Select "Forced" as download mode.
    6. Start the download and confirm by clicking on the window that pops-up.
    7. At the end of the system version download, to activate the new system version a bench
    switch is required: click on “Bench switch” confirm by clicking on the window that pops-
    up. Warning: the bench switch may be traffic affecting, depending on the system
    version previously running

    AGS20 Software Upgrade

    SIAE MICROELETTRONICA Proprietary and Confidential. All rights reserved. The copyright of this document is the
    property of SIAE MICROELETTRONICA. No part of this document may be copied, reprinted or reproduced in any material
    Page 4 of 4 form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA. Further, the contents of this
    document or the methods or techniques contained therein must not be disclosed to any person.

    You might also like