Grupo Electrogeno FG Wilson P44e5

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Output Ratings

Generating Set Model P40P5 P44E5


380–415V, 50 Hz 40.0 kVA 44.0 kVA
32.0 kW 35.2 kW
480V, 60 Hz 45.0 kVA 50.0 kVA
36.0 kW 40.0 kW
Ratings at 0.8 pf
Ratings Definitions
www.FGWilson.com
Prime Power – Model P40P5
These ratings are applicable for supplying continuous electrical power (at variable
load) in lieu of commercially purchased power. There is no limitation to the
annual hours of operation and this model can supply 10% overload power for
1 hour in 12 hours.

Standby Power – Model P44E5


These ratings are applicable for supplying continuous electrical
power (at variable load) in the event of a utility power failure.
No overload is permitted on these ratings. The alternator on this
model is peak continuous rated (as defined in ISO 8528-3).

Technical Data
Engine Model: Perkins 1104A-44G
Alternator Model: LL2014B
Number of Cylinders: 4 In Line
Displacement: litres (cu.in) 4.4 (268.5)
Bore/Stroke: mm (in) 105.0 (4.1)/127.0 (5.0)
Compression ratio: 19.25:1
Induction: Naturally Aspirated
Frequency: 50 Hz 60 Hz
Engine Speed: 1500 RPM 1800 RPM
Gross Engine Power: kW (hp) 45.0 (60.0) 54.0 (72.0)
BMEP: kPa (psi) 818.0 (118.7) 818.0 (118.7)
Piston Speed: m/sec (ft/sec) 6.4 (20.8) 7.6 (25.0)
Fuel Tank Capacity: litres (US gal) 175 (46.2) 175 (46.2)
Fuel Consump, P40P5: l/hr (US g/hr) 9.7 (2.6) 10.4 (2.7)
Fuel Consump, P44E5: l/hr (US g/hr) 10.7 (2.8) 11.6 (3.1)
Heat Rejected to
Exhaust System: kW (Btu/min) 38.0 (2161) 48.0 (2730)
Heat Rejected to
Water & Lube Oil: kW (Btu/min) 27.4 (1558) 31.0 (1763)
Heat Radiation to Room: kW (Btu/min) 9.0 (512) 8.0 (455)
Exhaust Gas Temperature: ˚C (˚F) 580 (1076) 600 (1112)
Radiator Cooling
Air Flow: m3/min (cfm) 74.4 (2627) 97.8 (3454)
Cooling system designed to operate
in ambient conditions up to 50˚C (122˚F)*
Combustion Air Flow: m3/min (cfm) 2.8 (99) 3.4 (120)
Exhaust Gas Flow: m3/min (cfm) 7.7 (272) 9.4 (332)

*Contact your local FG Wilson dealer for power ratings at specific site conditions.

Dimensions and Weights


Length: mm (in) Width: mm (in) Height: mm (in) Dry: kg (lb) Wet: kg (lb)
2150 (84.6) 752 (29.6) 1366 (53.8) 904 (1993) 917 (2022)
Dry = With Lube Oil Wet = With Lube Oil and Coolant

Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1/22.

P40P5 / P44E5
Generating set pictured may include optional accessories.

Generator set picture may contain non-standard options

abcde
FG Wilson has manufacturing facilities in the following
locations:
Northern Ireland • Brazil • China • India • USA
With headquarters in Northern Ireland, FG Wilson operates through a Global Dealer
Network. To contact your local Sales Office please visit the FG Wilson website at
www.FGWilson.com

In line with our policy of continuous product development, we reserve the right to change specification without notice.
10000-06115 P40P5 / P44E5/1PP/0606/GB

You might also like