Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    R1-Methdology of Extension of Slab Culvert

    Uploaded by

    rajiv kumar
    The document outlines the methodology for extending a slab culvert, including: dowel bars to be provided 400mm into the raft and 600mm below ground; chipping the existing abutment wall vertically so the extended wall can be properly bounded; anchoring the RCC bed block with PCC abutment/pier extension with reinforcement rods; checking the top level of the wall for revised slab thickness; providing a 2% chamber on top of the slab; breaking the existing slab for 300mm and overlapping reinforcement; installing a tar paper bearing and asphaltic plug expansion joint; and providing a 75mm thick wearing coat with reinforcement over the existing and extended slabs. Reinforcement for the top slab will be as

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    R1-Methdology of Extension of Slab Culvert

    Uploaded by

    rajiv kumar
    17 views1 page
    The document outlines the methodology for extending a slab culvert, including: dowel bars to be provided 400mm into the raft and 600mm below ground; chipping the existing abutment wall vertically so the extended wall can be properly bounded; anchoring the RCC bed block with PCC abutment/pier extension with reinforcement rods; checking the top level of the wall for revised slab thickness; providing a 2% chamber on top of the slab; breaking the existing slab for 300mm and overlapping reinforcement; installing a tar paper bearing and asphaltic plug expansion joint; and providing a 75mm thick wearing coat with reinforcement over the existing and extended slabs. Reinforcement for the top slab will be as

    Original Description:

    extension of slab culverts a method devised

    Original Title

    r1-Methdology of Extension of Slab Culvert

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines the methodology for extending a slab culvert, including: dowel bars to be provided 400mm into the raft and 600mm below ground; chipping the existing abutment wall vertically so the extended wall can be properly bounded; anchoring the RCC bed block with PCC abutment/pier extension with reinforcement rods; checking the top level of the wall for revised slab thickness; providing a 2% chamber on top of the slab; breaking the existing slab for 300mm and overlapping reinforcement; installing a tar paper bearing and asphaltic plug expansion joint; and providing a 75mm thick wearing coat with reinforcement over the existing and extended slabs. Reinforcement for the top slab will be as

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    17 views1 page

    R1-Methdology of Extension of Slab Culvert

    Uploaded by

    rajiv kumar
    The document outlines the methodology for extending a slab culvert, including: dowel bars to be provided 400mm into the raft and 600mm below ground; chipping the existing abutment wall vertically so the extended wall can be properly bounded; anchoring the RCC bed block with PCC abutment/pier extension with reinforcement rods; checking the top level of the wall for revised slab thickness; providing a 2% chamber on top of the slab; breaking the existing slab for 300mm and overlapping reinforcement; installing a tar paper bearing and asphaltic plug expansion joint; and providing a 75mm thick wearing coat with reinforcement over the existing and extended slabs. Reinforcement for the top slab will be as

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 1

    METHODOLOGY OF EXTENSION OF SLAB CULVERT

     Dowel bar 32mm dia @ 1000 mm c/c (transverse direction) in two rows
    has to be provided 400 mm into raft and 600 mm below ground (1000 mm
    length).
     Existing abutment wall will be chipped vertically or stepped so that
    extended wall can be properly bounded. After concreting gap has to be
    grouted with cement mortar 1:3.
     RCC Bed block has to be anchored with PCC Abutment/Pier
    Extension.with 8mm dia rods at regular interval (say at 500mm c/c in two
    rows)
     Top level of wall to be checked for revised thickness of slab.
     Chamber of 2% has to be provided on top of slab.
     Existing slab has to be broken for 300 mm width and distributor
    reinforcement of both slabs should be overlapped with anchor bend and
    then continually concreted.
     Tar paper bearing and asphaltic plug expansion joint has to be provided.
     75 mm thick wearing coat (cc) will be provided over both existing slab and
    extension with nominal reinforcement of 8mm dia at 150mmcc at bottom.
     Reinforcement for top slab has to be as per standard MORTH drawing for
    6.4m effective spam .Slab thickness shall be 500mm.

    SENIOR BRIDGE ENGINEER,REWA.

    You might also like