Scribd Logo
Upload

Welcome to Scribd!

  • 313 views

    PU158TI

    Uploaded by

    Trevor Burnett
    This document provides specifications for the PU158TI P-Drive engine including: 1. The engine has a maximum power output of 397kW at 2100rpm and maximum torque of 2117Nm at 1500rpm, with a fuel consumption of 222g/kWh at 2100rpm. 2. If run continuously, the engine power is restricted to 353kW at 1800rpm. 3. The engine has an 8 cylinder V configuration, is water cooled and turbocharged with intercooling, and uses direct fuel injection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PU158TI

    Uploaded by

    Trevor Burnett
    313 views2 pages
    This document provides specifications for the PU158TI P-Drive engine including: 1. The engine has a maximum power output of 397kW at 2100rpm and maximum torque of 2117Nm at 1500rpm, with a fuel consumption of 222g/kWh at 2100rpm. 2. If run continuously, the engine power is restricted to 353kW at 1800rpm. 3. The engine has an 8 cylinder V configuration, is water cooled and turbocharged with intercooling, and uses direct fuel injection.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the PU158TI P-Drive engine including: 1. The engine has a maximum power output of 397kW at 2100rpm and maximum torque of 2117Nm at 1500rpm, with a fuel consumption of 222g/kWh at 2100rpm. 2. If run continuously, the engine power is restricted to 353kW at 1800rpm. 3. The engine has an 8 cylinder V configuration, is water cooled and turbocharged with intercooling, and uses direct fuel injection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    313 views2 pages

    PU158TI

    Uploaded by

    Trevor Burnett
    This document provides specifications for the PU158TI P-Drive engine including: 1. The engine has a maximum power output of 397kW at 2100rpm and maximum torque of 2117Nm at 1500rpm, with a fuel consumption of 222g/kWh at 2100rpm. 2. If run continuously, the engine power is restricted to 353kW at 1800rpm. 3. The engine has an 8 cylinder V configuration, is water cooled and turbocharged with intercooling, and uses direct fuel injection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    PU158TI P-DRIVE

    ◎ POWER RATING

    Intermittent rating Max. torque Fuel consumption


    kW(PS) / rpm N.m(kg.m) / rpm g/kW.h(g/PS.h) / rpm

    397 (540) / 2100 2117 (216) / 1500 222 (163) / 2100

    1. The engine performance corresponds to ISO 3046, DIN 6270B.


    2. If needs continuous duty, Engine power is restricted to 353kW(480ps) @1800rpm.

    ◎ MECHANICAL SYSTEM ◎ FUEL SYSTEM


    ㅇEngine Model PU158TI ㅇInjection pump Bosch in-line “P” type
    ㅇEngine Type V-type 4 cycle, water cooled ㅇGovernor Mechanical type
    Turbo charged & intercooled ㅇFeed pump Mechanical type
    ㅇCombustion type Direct injection ㅇInjection nozzle Multi hole type
    ㅇCylinder Type Replaceable wet liner ㅇFuel filter Full flow, cartridge type
    ㅇ Number of cylinders 8 ㅇUsed fuel Diesel fuel oil
    ㅇBore x stroke 128(5.04) x 142(5.59) mm(in.)
    ㅇDisplacement 14.618(892.0) lit.(in3) ◎ LUBRICATION SYSTEM
    ㅇCompression ratio 15 : 1 ㅇLub. Method Fully forced pressure feed type
    ㅇFiring order 1-5-7-2-6-3-4-8 ㅇOil pump Gear type driven by crankshaft
    ㅇInjection timing 18° BTDC ㅇOil filter Full flow, cartridge type
    ㅇDry weight Approx. 950 kg (2,094 lb) ㅇOil pan capacity High level 21 liters ( 5.55 gal.)
    ㅇDimension 1,484 x 1,389 x 1,161.5 mm Low level 17 liters ( 4.50 gal.)
    (LxWxH) (58.4 x 54.7 x 45.7 in.) ㅇAngularity limit Front down 35 deg.
    ㅇRotation Counter clockwise viewed from Flywheel Front up 35 deg.
    ㅇFly wheel housing SAE NO.1M Side to side 35 deg.
    ㅇFly wheel Clutch NO.14M ㅇLub. Oil Refer to Operation Manual

    ◎ MECHANISM ◎ PERFORMANCE CURVE


    ㅇType Over head valve
    ㅇNumber of valve Intake 1, exhaust 1 per cylinder
    ㅇValve lashes at cold Intake 0.25mm (0.0098 in.)
    Exhaust 0.35mm (0.0138 in.)

    ◎ VALVE TIMING
    Opening Close
    ㅇIntake valve 24 deg. BTDC 36 deg. ABDC
    ㅇExhaust valve 63 deg. BBDC 27 deg. ATDC

    ◎ OPTION & ACCESSORY PARTS


    ㅇEngine parts Fly wheel & housing
    Intake & exhaust manifold
    ㅇAccessory parts Raditor, silencer & air cleaner
    ㅇElectrical parts Gauge panel & stop solenoid

    DOOSAN Infracore Printed in August 2012 PDE-SBP0715-E1F


    PU158TI P-DRIVE

    ◎ COOLING SYSTEM ◎ ENGINEERING DATA


    ㅇCooling method Fresh water forced circulation ㅇWater flow 454 liters/min @2,100 rpm
    ㅇWater capacity 20 liters ( 5.28 gal.) ㅇHeat rejection to coolant 45.2 kcal/sec @2,100 rpm
    (engine only) ㅇHeat rejection to CAC 18.8 kcal/sec @2,100 rpm
    ㅇPressure system Max. 0.5 kg/cm2 ( 7.1 psi) ㅇAir flow 34.5 m3/min @2,100 rpm
    3
    ㅇWater pump Centrifugal type driven by belt ㅇExhaust gas flow 87.4 m /min @2,100 rpm
    ㅇWater pump Capacity 454 liters ( 120 gal.)/min ㅇExhaust gas temp. 600 °C @2,100 rpm
    at 2,100 rpm (engine) ㅇMax. permissible restrictions
    ㅇThermostat Wax – pellet type -.Intake system 220 mmH2O initial
    Opening temp. 79°C 635 mmH2O final
    Full open temp. 94°C -.Exhaust system 1000 mmH2O max.
    ㅇCooling fan Blower type, plastic
    915 mm diameter, 7 blade

    ◎ ELECTRICAL SYSTEM ◆ CONVERSION TABLE


    ㅇCharging generator 24V x 45A alternator in. = mm x 0.0394 lb/ft = N.m x 0.737
    ㅇVoltage regulator Built-in type IC regulator PS = kW x 1.3596 U.S. gal = lit. x 0.264
    ㅇStarting motor 24V x 7.0kW psi = kg/cm2 x 14.2233 kW = 0.2388 kcal/s
    ㅇBattery Voltage 24V in3 = lit. x 61.02 lb/PS.h = g/kW.h x 0.00162
    ㅇBattery Capacity 200 AH (recommended) hp = PS x 0.98635 cfm = m3/min x 35.336
    ㅇStarting aid (Option) Block heater lb = kg x 2.20462

    Doosan Infracore Co., Ltd.


    21st Floor, Doosan Tower, 18-12, Euljiro 6-ga,
    Jung-gu, Seoul, Korea

    TEL : +82-2-3398-8400 / Fax : +82-2-3398-8509


    E-mail : [email protected]
    Web site : www.doosaninfracore.com

    ※ Speccifications are subject to change without prior notice


    DOOSAN Infracore Printed in Agust 2012 PDE-SBP0715-E1F

    You might also like