Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Assignments 2 1st 2019 20

    Uploaded by

    Alhaz Uddin
    The document contains 4 questions regarding reinforced concrete design. Question 1 asks to calculate reinforcement for a T-beam section under a given moment. Question 2 asks to calculate reinforcement for an interior beam in a floor system under a given moment. Question 3 asks to check the adequacy of a T-beam section under given service loads. Question 4 asks to design shear reinforcement for a rectangular beam with varying parameters based on student ID.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Assignments 2 1st 2019 20

    Uploaded by

    Alhaz Uddin
    19 views3 pages
    The document contains 4 questions regarding reinforced concrete design. Question 1 asks to calculate reinforcement for a T-beam section under a given moment. Question 2 asks to calculate reinforcement for an interior beam in a floor system under a given moment. Question 3 asks to check the adequacy of a T-beam section under given service loads. Question 4 asks to design shear reinforcement for a rectangular beam with varying parameters based on student ID.

    Original Description:

    Reinforced concrete assignment

    Original Title

    Assignments-2-1st-2019-20

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains 4 questions regarding reinforced concrete design. Question 1 asks to calculate reinforcement for a T-beam section under a given moment. Question 2 asks to calculate reinforcement for an interior beam in a floor system under a given moment. Question 3 asks to check the adequacy of a T-beam section under given service loads. Question 4 asks to design shear reinforcement for a rectangular beam with varying parameters based on student ID.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views3 pages

    Assignments 2 1st 2019 20

    Uploaded by

    Alhaz Uddin
    The document contains 4 questions regarding reinforced concrete design. Question 1 asks to calculate reinforcement for a T-beam section under a given moment. Question 2 asks to calculate reinforcement for an interior beam in a floor system under a given moment. Question 3 asks to check the adequacy of a T-beam section under given service loads. Question 4 asks to design shear reinforcement for a rectangular beam with varying parameters based on student ID.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Course Title: Reinforced Concrete-i Assignment #: 2

    Course Code: CE 470 Submission Deadline:


    25/11/2019
    Instructor: Dr. Mohammad Alhaz
    Uddin Date:
    Level/Year Level 6/ Fall 2019 College of Engineering 18/11/2019
    Department of Civil Engineering
    Student Name: I.D#: Total Marks 20

    Question # 1 Total Marks 5 CLO 2 SO 2 PLO 4

    Question # 2 Total Marks 5 CLO 2 SO 2 PLO 4

    Question # 3 Total Marks 5 CLO 2 SO 2 PLO 4

    Question # 4 Total Marks 5 CLO 2 SO 2 PLO 4

    Q1. The T-beam section shown in Figure has a web width, b𝑤, of 250 mm, a flange width, b, of 1000 mm, a
    flange thickness of 100 mm, and an effective depth, d (mm). Determine the necessary reinforcement if the
    applied factored moment is 380 kN.m. Given: fc′ = 20.5 MPa and fy = 414 MPa.

    Q2. The floor system shown in Figure consists of 75 mm slabs supported by 4 m-span beams spaced 3 m
    on center. The beams have a web width, b𝑤, of 350 mm and an effective depth, d, of 462.5 mm. Calculate the
    necessary reinforcement for a typical interior beam if the factored applied moment is 574 kN.m. Use
    fc′ = 20.5 MPa and fy = 414 MPa.
    Q3. Verify the section is either adequate or not based on ACI design moment strength Md of the T-beam shown
    in the figure if a service dead load of 29 kN/m (including the beam weight) and a service live load of 22 kN/m for
    12 m simple span. Use fc’ =20 MPa and fy = 420 MPa. [All the dimension in figure is centimeter]
    Q4. A rectangular beam has span length L (m) and dimensions shown in the figure and a factored uniform load
    of Wu (kN/m) is applied on the beam. Design the necessary shear reinforcement given that fc’ (MPa) and fy (MPa).
    Width of support is equal to 300 mm. [Note: Each student has different values in the table is required to select
    based on student ID].

    Student ID L (mm) Wu (kN/m) fc’ (MPa) fy (MPa)


    321100307 8.5 90 30 420
    351101173 6.6 85 28 416
    361100130 7.9 83 25 426
    361100473 9.0 72 27 414
    361101436 7.3 95 32 430
    361101968 8.2 75 24 428
    401101989 8.7 80 21 418

    You might also like