Scribd
Upload
110 views

Basic Cisco Commands

This document provides Cisco router configuration, show, copy, and debug commands mapped to common requirements. The configuration section includes commands for setting passwords, interfaces, routing protocols, and more. The show section lists commands for viewing router information and status. The copy section covers saving and loading configurations. The debug section enables debugging for various protocols.

Uploaded by

iarnab
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
110 views

Basic Cisco Commands

This document provides Cisco router configuration, show, copy, and debug commands mapped to common requirements. The configuration section includes commands for setting passwords, interfaces, routing protocols, and more. The show section lists commands for viewing router information and status. The copy section covers saving and loading configurations. The debug section enables debugging for various protocols.

Uploaded by

iarnab
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

1/5 Document Type Document Title

Author Date, Version


Unit/Dept. For internal use

Cisco Router Configuration Commands

Requirement Cisco Command

Set a console password to cisco Router(config)#line con 0


Router(config-line)#login
Router(config-line)#password cisco

Set a telnet password Router(config)#line vty 0 4


Router(config-line)#login
Router(config-line)#password cisco

Stop console timing out Router(config)#line con 0


Router(config-line)#exec-timeout 0 0

Set the enable password to cisco Router(config)#enable password cisco

Set the enable secret password to Router(config)#enable secret peter


peter.
This password overrides the
enable password and is
encypted within the config file

Enable an interface Router(config-if)#no shutdown

To disable an interface Router(config-if)#shutdown

Set the clock rate for a router Router(config-if)clock rate 64000


with a DCE cable to 64K

Set a logical bandwidth Router(config-if)bandwidth 64


assignment of 64K to the serial Note that the zeroes are not missing
interface

To add an IP address to a Router(config-if)#ip addr 10.1.1.1


interface 255.255.255.0

To enable RIP on all 172.16.x.y Router(config)#router rip


interfaces Router(config-router)#network
172.16.0.0
2/5 Document Type Document Title
Author Date, Version
Unit/Dept. For internal use

Disable RIP Router(config)#no router rip

To enable IRGP with a AS of Router(config)#router igrp 200


200, to all interfaces Router(config-router)#network
172.16.0.0

Disable IGRP Router(config)#no router igrp 200

Static route the remote network Router(config)#ip route 172.16.1.0


is 172.16.1.0, with a mask of 255.255.255.0 172.16.2.1 5
255.255.255.0, the next hop is
172.16.2.1, at a cost of 5 hops

Disable CDP for the whole Router(config)#no cdp run


router

Enable CDP for he whole router Router(config)#cdp run

Disable CDP on an interface Router(config-if)#no cdp enable

Cisco Router Show Commands

Requirement Cisco Command

View version information show version

View current configuration show running-config


(DRAM)

View startup configuration show startup-config


(NVRAM)

Show IOS file and flash space show flash

Shows all logs that the router has show log


in its memory

View the interface status of show interface e0


interface e0
3/5 Document Type Document Title
Author Date, Version
Unit/Dept. For internal use

Overview all interfaces on the show ip interfaces brief


router

View type of serial cable on s0 show controllers 0 (note the space


between the 's' and the '0')

Display a summary of connected show cdp neighbor


cdp devices

Display detailed information on show cdp entry *


all devices

Display current routing protocols show ip protocols

Display IP routing table show ip route

Display access lists, this includes show access-lists


the number of displayed matches

Check the router can see the show isdn status


ISDN switch

Check a Frame Relay PVC show frame-relay pvc


connections

show lmi traffic stats show frame-relay lmi

Display the frame inverse ARP show frame-relay map


table

Cisco Router Basic Operations

Requirement Cisco Command

Enable Enter privileged mode

Return to user mode from disable


privileged
4/5 Document Type Document Title
Author Date, Version
Unit/Dept. For internal use

Exit Router Logout or exit or quit

Recall last command up arrow or <Ctrl-P>

Recall next command down arrow or <Ctrl-N>

Suspend or abort <Shift> and <Ctrl> and 6 then x

Refresh screen output <Ctrl-R>

Compleat Command TAB

Cisco Router Copy Commands

Requirement Cisco Command

Save the current configuration copy running-config startup-config


from DRAM to NVRAM

Merge NVRAM configuration to copy startup-config running-config


DRAM

Copy DRAM configuration to a copy runing-config tftp


TFTP server

Merge TFTP configuration with copy tftp runing-config


current router configuration held
in DRAM

Backup the IOS onto a TFTP copy flash tftp


server

Upgrade the router IOS from a copy tftp flash


TFTP server

Cisco Router Debug Commands


5/5 Document Type Document Title
Author Date, Version
Unit/Dept. For internal use

Requirement Cisco Command

Enable debug for RIP debug ip rip

Enable summary IGRP debug debug ip igrp events


information

Enable detailed IGRP debug debug ip igrp transactions


information

Debug IPX RIP debug ipx routing activity

Debug IPX SAP debug IPX SAP

Enable debug for CHAP or PAP debug ppp authentication

Switch all debugging off no debug all


undebug all

You might also like