Order No.

ITD1511904GE

Model No. OLED-201510

2015 – OLED TV

Ver. 1.0

c Panasonic Corporation 2015

Unauthorized copying and distribution is
a violation of law.
 Revision History

Version Issued/Revised Revised content

date
Ver. 1.0 6th. Nov. 2015 First version

2
 INDEX

1.Lineup and Function Comparison

2.About OLED
3.Board Layout
4.Video Signal Processing
5.SOS Protection Circuit and Troubleshooting
6.Set layout of OLED
7.Service & handling instructions for OLED

3
1. Lineup and Function Comparison

4
OLED TV Model Concept

■Strengthen Panasonic Brand image by this model. Introduce this model with consider about “CURVED”
design Trend with our top level of picture quality and Smart functionality
■As reference position of Panasonic TV, pursuit of black performance based on self emitting device
characteristic and also pursuit of thinness with advanced quality cosmetic design
-Unmeasurable contrast and highest quality video performance based on self emitting device advantage
-Stylish and high quality cosmetic design with 360 degree utilize with thinnest OLE device
-Comply with basic 4K functionality such as HEVC, HDMI2.0(with HDCP2.2), and VP9

■Target User ■Basic Function

・The Customer who pursuit “NEW” trend for TV ・Model Name: TX-65CZ950E
・Cinema Lover who pursuit DEEPEST black performance ・LGD Module w/5000R, One body type TV
・HEVC, VP9, 3D(Passive)
・Design oriented w/ALCANTARA material
■Unique Sales Point
■Sales area
1.Design ・Euro(B/E/W), Russia
- 360 degree design with thin and curved image

2.High Quality video/High function performance

- Best Black reproduction based on self emitting device
Unmeasurable black reproduction
- Dynamic Cinema LCD: black float OLED: deep black
Realize wide dynamic range performance with deep
black and White peak on OLED character
Thin design
6.5mm at edge
3.Function
- Compatible with 4K IPTV（Netflix, Amazon, You tube） FRONT VIEW REAR VIEW
5
New Model Number

Continental Europe
T X - 6 5 C Z 9 5 0 E *
T=TV H = Asia Year Series Design/ Country/ (Extra)
(fixed) Inch Grade Function/ Region
C = Americas
Derived model
X = Europe

<Year> : 1 digit alphabet ( 2014=A, 2015=C, … )

<Series> : 1 digit alphabet ( S=Smart, Non=no smart , X=4k, R=Curved 4k, Z=OLED)
<Design/Grade> : 3 digit number ( hundred's digit =Design/Grade,
ten’s digit and one’s digit = function difference or derived model )
< Examples >
UK/Ireland
T X - 6 5 C Z 9 5 2 B *
DACH (Germany, Austria)
T X - 6 5 C Z W 9 5 4 *
Switzerland
T X - 6 5 C Z C 9 5 4 *
Russia
T X - 6 5 C Z R 9 5 0 *

6
Lineup and Comparison of the Functions（Europe/CIS)
2014 2015
Model Name TX-65AX900E TX-65CZ950E TX-65CR850E
OLED Curved LCD
SoC Pro5+GCX2 Pro5+GCX2+MT5810 MT5810+GCX2

Function/ My Home Screen 1.0 (No MHS, No Firefox OS) 2.0 powered by Firefox OS
Easy Operation
WiFi N Y Y
HDMI 4 ports 4 ports 3 ports
SD Card Y N Y
DisplayPort Y N N
3D Y(Active) Y(Passive) Y(Active)
Multi Window Y Y(only Picture-and-Picture) Y
Mic/Camera/Sensor Mic/Camera/Motion Sensor N Motion Sensor
Picture/Sound Real 10bit N Y N
HDR N Y N
VP9 4K decode N Y(except Media Player) Y
Speaker System 18W 60W 40W
Front Squawker 4W x2 Front Tweeter 10W x2 Front Tweeter /Sq 10W x2
Woofer 10W x1 Box Bottom Sq 10W x2 Woofer 10W x2
Woofer 10W x2
Design Screen radius of Infinity(Flat) Curved 5000R Curved 4000R
curvature
Pedestal Slant type, arc Upright, buffed slim pipe Slant type, arc
Cosmetic cover N Y (ALCANTARA fabric finish, N
detachable)

The detail lineup and specification are different in each countries.

7
2. About OLED

8
About
仕様概略 OLED
■What is OLED?
OLED (Organic Light Emitting Diode)
Using an organic compound in the luminescent material, it is a kind of light-emitting element using a
phenomenon called “Organic EL (organic electroluminescence)”.
The OLED is deposited organic materials to electrodes formed on a glass substrate, has a sandwiched
structure with the electrodes, it is able to control the intensity with the current flow from the electrode.
Compared to the LCD, the advantages are,
① Contrast improvement by self-luminous
② Lower power consumption
③ Excellent Response speed

■Panel structure ■Light-emitting theory of OLED

Slim & light-weight without backlight
DATA POWER
(OLED) (LCD) Scanning line Data Voltage

Drain Current
(Id)

Need No
Backlight TFT OLED device
Color Filter
TFT Cell Each voltage supplied to "data line" and the
White EL
"power line“ makes TFT "ON", the current flows
Pixel structure to the OLED device and it emit light. Brightness
of the device is controlled by the current value.

9
3. Board Layout

10
Board Layout (CZ950 series)

Panel Assy

P2 FR
P1 A

Wi-Fi

GK PN
BT

S K

Board Name Function Board Name Function

A-Board Main Board FR-Board Image processor (GCX2), Audio AMP

P1-Board Power supply (not repairable) K-Board Remote Receiver, Power LED, C.A.T.S
P2-Board Power supply (not repairable) GK-Board Control Buttons
PN-Board Temperature Sensor S-Board Main Power Switch
11
4. Video Signal Processing

12
 Video/Audio Signal Process
CZ950 series OPT_out

WiFi

Bluetooth IC8650 A FR
USB1 (USB HUB)
IC9500
USB2 (GCEX2-1)

USB3.0 Frame
IC8000 Rate
Antenna TU670* IC6800/6803 (PEAKS Pro5) Convert
terminal TUNER De-Modulation
Resize to OLED Panel
AV IP conv. eDP BUS eDP-BUS( V by One 8 Lane )
Video for SCART
IC3000 OSD
Component 2D->3D
(BROWNIE) Audio IN/OUT IC9600
SCART
AV Switch (GCEX2-2)
(only Europe) Internal HDMI Tx
Headphone Frame
IC8600 Rate
LAN
LAN Cont. Convert

CI-slot x2
(only Europe) CI Cont.
( TCON section is
HDMI
IC4510 IC10000 attached to OLED
HDMI IC4512 (RIO) (MT5810) PANEL)
HDMI HDMI SW HDMI Rx VP9 Decode
HDMI

The input terminals are different by the models or countries. 13

5. SOS Protection Circuit and Troubleshooting

14
Power SOS
SOS table of TX-65CZ950 series

LED (times) Failure Estimated Failure parts Note

1 Panel_SOS OLED panel New

2 EVDD(24V)_SOS OLED panel / P2 board New

7 SUB 3.3V_SOS A board/ P2 board =AX900

8 Power_SOS P2 board New

9 SOUND_SOS A board/ Speaker =AX900

10 GCX_SOS (GCEX2 initialization error) FR board =AX900

13 Emergency SOS A board =AX900

15
6. Set layout of OLED

16
Set layout KADOMA Mechanical Design

◆Put COSMETIC-COVER onto REAR-COVER by customer.

◆OLED panel module is supplied as complete module.
[OLED-PANEL＋MIDDLE-CABINET(AL/outline)＋BACK-COVER＋UDM-CHASSIS＋T-CON]
FRONT-ORNAMENT is assembled in FACTORY.

(Assemble in Factory) (Customer Process)

Display PANEL ASSY

(from LGD)
A-PCB BOTTOM
AV BRACKET
M/Cabinet FR-PCB SIDE_AV
BRACKET
P2-PCB COSMETIC COVER
P1-PCB （ASSY）
Support
Bar REAR COVER
Back-Cover
Assemble in （Pana-custom） FAN [6pcs]
Factory
K-PCB
ASSY FAN
（IR/AI/LED) METAL
DUCT
T-Con BARRIER
FRONT
ORNAMENT UDM Metal-Plate

Wi-Fi AP-PCB
ASSY
STAND BRACKET AD-PCB
[4pcs] BT ASSY Pedestal Stand
HANDLE [2pcs]
SP BRACKET GK-PCB S-PCB
[6pcs] ASSY HOLDER S-PCB
ASSY
(Control SW) AC CODE
VESA METAL (Power SW)
COVER
[L&R] BOTTOM COVER
TWEETER
[2pcs]

SP BOX [L&R] SOUND AS ASSEMBLY(except STAND-POLE)

REFLECTOR [L&R]
17
7. Service & handling instructions for OLED

18
How to move OLED TV set, how to lay OLED TV set/panel

1. How to move OLED TV set

Two people are required to move the OLED TV set to Reinforced by Metal Plate
prevent the panel from bending.
Due to large screen and thin design, OLED panel is Area which can be handle
Area which should
weaker than other present TV set. not be handle
（Both side)
Handle at metal plate of the OLED panel.
Due to weakness of OLED panel, do not handle at the Handle Hole
area which is not reinforced by the metal plate.

Don’t move the TV without Back Cover. Area which can be handle
Back Cover

Prior to handle, please make sure that the Back Cover

is fixed with at least four screws. Handling area
Handling the Bottom Cover will drop the TV set.
Use handle holes on the Back Cover.

2. How to lay OLED TV set/panel

Handle at metal plate of the OLED panel.
Same reason as above.
Handle CUSHON-FRONT
at metal plate
CUSHON-FRONT is necessary for laying the OLED TV
set or OLED panel on the table.(See next page also.)

When laying the OLED panel

19
How to exchange OLED panel and Packing spec. of OLED repair panel
CUSHION FRONT
(TPD0E51001) OLED panel
1. How to exchange OLED repair panel
When exchanging OLED panel, place the cushion-front bundled
in packing of OLED repair panel between the panel and the table
to prevent the panel from bending.

2. Packing of OLED repair panel How to put the OLED panel on the table

The packing specification for OLED repair panel uses one OLED set (TX-65CZ950) which includes
CARTON BOTTOM and All cushions of OLED repair panel.
CUSHION FRONT CUSHION REAR CUSHION TOP
BAG OLED repair panel
(TPD0E51001) (TPD0E51011) (TPD0E13991)

Dummy Rear Cover

& Bottom Cover
CARTON BOTTOM CURTON TOP for repair :
CUSHION BOTTOM (TPC0EA33001) Size is the same as OLED set.
(TPD0E23961) The content of the Print is the special for Service. 20
IC parts exchanged at the same time
Combination of exchange IC simultaneously / CZ950 series
1. Pro5 IC(IC8000) + eMMC(IC8920) (=AX900)
When Pro5 IC (IC8000) is replaced, eMMC (IC8920) should be also replaced with new one the same time.
When eMMC (IC8920) is replaced, Pro5 IC (IC8000) is not necessary to be replaced the same time.

2. MT5810 IC(IC10000) + eMMC(IC14000) (New/ CZ950)

When MT5810 IC (IC10000) is replaced, eMMC (IC14000) should be also replaced with new one the same time.
When eMMC (IC14000) is replaced, Pro5 IC (IC10000) is not necessary to be replaced the same time.

How to re-encrypt after the replacement IC (=AX900)

After the replacement of IC (IC8000+IC8920, IC10000+IC14000), SELF CHECK with factory shipment setting
should be done.

How to diagnosis between Pro5 and MT5810 MT5810(parts side)

What signal or contents are abnormal?

No (Other contents)
Pro5(solder side)
Are only VP9 contents abnormal? Pro5 NG

Yes (Only VP9 contents)

MT5810 NG
* Only VP9 contents are played back by using MT5810.
21
 Selfcheck
Selfcheck (Changing items from AX900) <How to display SelfCheck MENU> (=AX900)
1. Self-check indication only:
(1) Add the information of Easter
Panel Vol - + remote control “Blue” button
(1-a) software/EEPROM /LSI-DATA version
(1-b) result of Device Check
2. Self-check indication and forced to factory shipment setting:
Panel Vol - + remote control “Menu” button (Press>=3sec)
(2) Delete inch/panel type information

(2) e.g. 50FHD → deleted

SELF CHECK FAILED

H14TUN OK PEAKS-SOFT 3.040 MODEL ID 0b Delete “H52CAMERA” form AX900
H15TUN2 OK PEAKS-EEP 01.07.0005 03000101
H90STBY OK LSI-PACKAGE 0.014 00004000
H30AVSW OK LSI-RELEASE 1.09
H07TEMP OK STBY-SOFT 1.02.00 < (1-a) Information of Easter side>
H17LAN OK STBY-EEP 1.00.33bd DEC-SOFT : MT5810 version
H00FE OK STBY-ROMCOR 0.00.00 DEC-EEP : MT5810 EEPROM version
H00SAT-TU OK GCX DATA a4010201
H96ID OK LSI-PACKAGE :LSI-PACKAGE version
Add Soft Ver MT5810(Easter)
H97ID2 OK LSI-RELEASE :LSI-DATA version
H45BT OK DEC-SOFT 1.000 STBY-SOFT :STBY(uP) version
H42WIFI 01 DEC-EEP 01.00.0000 STBY-EEP :STBY(uP) EEPROM version
delete H03FAN OK LSI-PACKAGE 0.001
H36GCX OK LSI-RELEASE 1.000
H37GCX2 OK STBY-SOFT 1.00.00
*If PRO5 can not get these information,
H71TCON OK STBY-EEP 1.00.0000 “-----” is displayed instead of version.
H80HDMISW OK
H81HDMISW2 OK
H92MEM1 OK
H91MEM2 OK Add key for MT5810(Easter) < (1-b) Result of Device Check of Easter>
H00LAN OK H00LAN :ether device & MAC address check
H00ID3 OK (A-board)
H00ID3 :DTCP-IP KEY check (A-board)

Device Check area Version Other (model id & SOS history)

22
OLED Panel Test mode

You can diagnose a failure(abnormal picture) of CZ950 series

by using Panel test mode of OLED (Panel Free Run mode and FR test mode)

How to enter : While pressing [VOLUME ( - )] button of the main unit, How to diagnosis (=AX900)
press [YELLOW] button of the remote control three times.
(Symptom)
Picture : abnormal
LED blinking (Green <-> Red)
Sound : normal

Panel Free Run Enter Panel Free Run mode

White Red Green
(=AX900) Panel Free Run mode
Repeat Yes
Still abnormal picture
is displayed on test pattern OLED panel NG
of Panel free run
How to move : Press [OK] button of the remote control three times.

No (picture: normal)

FR Test mode Condition : FR Test mode

The input of the signal is essential for display of FR test pattern.
(=AX900) Abnormal picture Yes
In case of no signal , FR test pattern will not be able to be displayed.
is displayed FR board NG
Only 1 test pattern on FR test pattern
LED blinking (Green <-> Red)

How to move : Press [OK] button of the remote control three times. No (picture: normal)

A board NG
New Panel Free Run Special
Not Use for failure diagnosis
(OLED special mode) pattern
* Not use for diagnosis Repeat

LED blinking (Green <-> Red)

Exit

How to exit : Switch off the power with the [POWER] button on the main unit
or the [POWER] button on the remote control..

23