Pressure Transmitters and Transducers

165
 ESI Technology Ltd
The worldwide specialist for customised high precision
pressure transmitters and transducers

For decades, ESI In 2009 ESI Technology Ltd was acquired by

SUCO. Since then ESI stands for Electronics,
Technology with Sensors and Instruments. By forming part of
a bigger organisation, yet keeping its own
headquarters in independence, ESI has gained the strength

Wrexham (UK) has to expand its sales efforts and services

world-wide.
served its customers
ESI Technology has become one of the
with consistent product leading suppliers for specialised pressure

development, special sensors by offering bespoke solutions for

specific applications.
engineered solutions
With a dedicated manufacturing and
and outstanding engineering facility in Wrexham, ESI serves

technical service and an extensive range of major industries such

as Oil and Gas, Subsea, Aerospace, Marine,
1 sales support. Process, Test and Calibration.
Being one of the key suppliers to these Additional services, such as tailoring of the
industries requires high performance, not existing product range to suit application
only of its products, but also from design requirements, product conditioning such as
and sourcing through to shipment and ESS (Environmental Stress Screening) and
customer service, ESI’s Management System product documentation packaging, make
is approved to ISO 9001:2008 and ATEX, ESI the perfect partner for customers who
IECEx and DNV-GL approval is available on a
need a bespoke service.
wide range of products.

With a wide sales network, ESI Technology is

Throughout the product range, ESI uses a
able to deliver its special services globally. If
variety of state of the art sensor technolo-
you can’t find the suitable solution on the
gies to make each product a perfect fit to
the desired application. following pages, please do not hesitate to
contact the ESI Technology sales team or
The jewel of ESI’s sensor technologies is one of its partners who are always close by.
Silicon-on-Sapphire, which has redefined
the performance capability of pressure We are looking forward
monitoring products. to supporting you! 2
 Contents
Technical Explanation for ESI Pressure Sensors page 07
ATEX/ IECEx Information page 09
Product Selection Matrix - Help in choosing the correct transmitter page 11

S.01 Special Solutions page 15

Application specific design solutions
Customised housing design
Choice of output signals and pressure ranges
Specialised process connections
Various electrical connectors
Special housing materials

S.02 Oil & Gas and Subsea Solutions page 17

Dual redundancy (Pressure sensors and electronics)
Hyperbaric testing to 3,300 m Depth
Environmental Stress Screening (ESS)
Bespoke process connections
Extended service life
Special housing materials
Comprehensive documentation package and certification

S.03 USB-Transducer page 19

Pressure Ranges: From Vac up to 5,000 bar
Sensor Technology: Silicon-on-Sapphire (SoS)
Accuracy: ≤ ±0.15 % of span BFSL
Output Signal: USB-Interface power supply and data transfer via USB
Wetted Parts: Titanium
Process Connection: ¼” BSP male (G ¼); ¼” NPT male or Autoclave F250-C female;
Electrical Connection: USB Mini B
Types: GS4200-USB; GD4200-USB

ESI__S.1 HP

S.04 General Purpose Pressure Transmitter page 23

Pressure Ranges: From Vac up to 1,500 bar
Sensor Technology: Silicon-on-Sapphire (SoS)
Accuracy: ≤ ±0.25 % of span BFSL
Output Signal: 10 mV/V or 0–5 V or 0–10 V or 4–20 mA
Wetted Parts: Titanium
Process Connection: 1/4" BSP (G ¼) or 1/4" NPT Male (others options available)
Options: ATEX/IECEx (available only for 4–20 mA), includes mining
areas (Group I M1) DNV-GL certified option
Types: GS4200; GS4201; GS4202; GS4212; GS4203; GS4213

3 ESI__S.1 HP
S.05 High Pressure Transmitter page 27

Pressure Ranges: From 0 – 600 bar up to 5,000 bar
Sensor Technology: Silicon-on-Sapphire (SoS)
Accuracy: ≤ ±0.25 % of span BFSL
Output Signal: 10 mV/V or 0–5 V or 0–10 V or 4–20 mA
Wetted Parts: All Titanium, machined from a single piece (≥1,000 bar)
Process Connection: Autoclave F250-C female; M16 x 1.5 female
Options: ATEX/IECEx (available only for 4–20 mA), includes mining
areas (Group I M1) DNV-GL certified option
Types: HP1000; HP1001; HP1002; HP1003; HP1011; HP1012; HP1100; ESI__S.1 HP

HP1101; HP1102; HP1103; HP1111; HP1112

S.06 Low Pressure Transmitter page 31

Pressure Ranges: From 0–50 mbar up to 1,000 mbar
Sensor Technology: Piezoresistive Silicon Sensor
Accuracy: ≤ ±0.5 % of span BFSL
Output Signal: 10 mV/V (typ.) or 0–5 V or 0–10 V or 4–20 mA
Wetted Parts: SAE 316 stainless steel
Process Connection: ¼” BSP male (G ¼); ½” BSP male (G1/2); ¼” NPT male; ½” NPT
male (others on request)
Types: LP1000; LP1001; LP1011; LP1002; LP1012; LP1003; ESI__S.1 HP

S.07 High Precision Pressure Transducer page 35

Pressure Ranges: 0–500 mbar to 1,500 bar
Sensor Technology: Silicon-on-Sapphire (SoS)
Accuracy: ≤ ±0.1 % of span BFSL
Temperature Effects: ±1.0 % FS max. thermal error band over -20 °C to +70 °C
Output Signal: 10 mV/V (typ.) or 0–5 V or 0–10 V
Wetted Parts: All Titanium Process Connection: ¼” BSP male (G ¼)
or ¼” NPT male
Electrical Connection : MIL-C-26482 6 pin Bayonet or 1 m PTFE cable ESI__S.1 HP

Options: ATEX/IECEx (available only for mV output),

includes mining areas (Group I M1)
Types: HI2000; HI2001; HI2002 HI2010; HI2011; HI2012

4
 Contents

S.08 Intrinsically Safe Pressure Transmitter page 39

Certification: ATEX and IECEx approved for explosion protection for flam
mable gases (zone 0), dusts (zone 20) and mining areas (group I M1).
Pressure Ranges: 0-100 mbar up to 1,500 bar
Output Signal: 4-20 mA
Process Connection: 1/4" NPT female standard or 1/2" BSP male (G1/2);
other options available
Options: DNV-GL certified option
ESI__S.1 HP
Types: PR3900; PR3110EX

S.09 High Temperature Pressure Transmitter page 45

Temperature Ranges: Media temperature up to 250 °C
Pressure Ranges: : From Vac up to 1,500 bar
Output Signal: mV or 4–20 mA
Process Connection: ¼” BSP male (G ¼); ¼” NPT male or ½” BSP flush diaphragm
Electrical Connection: MIL-C-26482 6 pin Bayonet; 1 m PTFE cable; DIN EN 175301
Option: ATEX/IECEx, includes mining areas (Group I M1)
Types: HI2200; HI2210; HI2300; HI2310; PR3860; PR3861; PR3862
ESI__S.1 HP

S.10 Submersible Depth / Level Pressure Transmitter page 51

Pressure Ranges: 0–1 mWG up to 500 mWG
Accuracy: ≤ ±0.3 % of span BFSL
Output Signal: 4–20 mA (other options on request)
Electrical Connection: Vented Cable
Option: ATEX/IECEx (available only for 4-20 mA), includes
mining areas (Group I M1) DNV-GL certified option
Types: PR3420; PR3441; PR3442

ESI__S.1 HP

S.11 Flush Diaphragm Pressure Transmitter page 55

Pressure Ranges: From Vac up to 400 bar
Sensor Technology: Thick Film Ceramic Sensor
Accuracy: ≤ ±0.3 % of span BFSL
Output Signal: 4–20 mA (other options on request)
Wetted Parts: Stainless steel 316 Process Connection: ½” BSP (G1/2);
Pipe-clamp; DIN 11851 (other options on request)
Options: ATEX/IECEx (available only for 4–20 mA), includes
mining areas (Group I M1)
5 ESI__S.1 HP
Types: PR3800; PR3801; PR3802; PR3820; PR3821; PR3822; PR3850;
PR3851; PR3852; PR3860; PR3861; PR3862
S.12 Differential Pressure Transmitter page 61

Pressure Ranges: 0–5 mbar up to 200 bar
Accuracy: ≤ ±0.3 % of span BFSL
Output Signal: 4 – 20 mA (other options on request)
Wetted Parts: Suitable for liquids or gases
Options: ATEX/IECEx (available only for 4–20 mA),
includes mining areas (Group I M1)
Types: PR3200; PR3202; PR3203; PR3204

ESI__S.1 HP

S.13 Standard Industrial Pressure Transmitter page 65

Pressure Ranges: From Vac to 1,000 bar
Output Signal: 2 mV/V typical, 0-5 V, 0-10 V or 4-20 mA
Process Connection: 1/4" BSP (G1/4); 1/2" BSP male (G1/2) or 1/4" NPT Male
(other options available)
Option: ATEX/IECEx (available only for 4–20 mA),
includes mining areas (Group I M1)
Types: GS4000; GS4001; GS4011; GS4002; GS4012; GS4003; GS4100;
GS4101; GS4111; GS4102; GS4112; GS4103; PR3101;
PR3102; PR3103
ESI__S.1 HP

S.14 Heavy Duty/ Wireless Pressure Transmitter page 71

Pressure Ranges: From Vac up to 1,500 bar
Sensor Technology: Silicon-on-Sapphire (SoS)
Output Signal: 4-20 mA or radio transmission
Process Connection: 1/2" BSP male (G1/2); other options available
Options: ATEX/IECEx (available only for 4–20 mA), includes mining
areas (Group I M1) or Wireless UHF radio transmitter
(non-ATEX/IECEx)
Types: PR9000; PR9500; RX9500
ESI__S.1 HP

S.15 Accessories page 77

High Temperature Pressure Adapter
Plug-in Display
Panel Meter

ESI__S.1 HP
6
 Technical Explanation
for ESI Pressure Sensors

Technical Explanation SoS technology

What is a pressure transmitter? In the silicon-on-sapphire technology, the substrate of the thin film
measuring cell is synthetic sapphire. This has excellent mechani-
A pressure transmitter (also called pressure transducer or pressure cal and temperature-stable properties, and prevents undesired
converter) is a component used to convert a pneumatic or hydrau- parasitic effects, thereby having a positive effect on accuracy and
lic pressure to an electrical (usually analogue and linear) output stability. In conjunction with a titanium membrane, this results in a
signal, such as a current or voltage. virtually unique coaction between the temperature coefficients of
sapphire and titanium. This is because, unlike silicon and high-gra-
How does a pressure transmitter work? de steel, they are more closely matched and so only require a low
level of compensation overhead. This also has a favourable effect
The pressure measuring cell has a membrane (1) that is exposed to on long-term stability.
the pressure to be measured. Affixed on this membrane is a bridge
circuit consisting of four ohmic resistors in the form of a Wheatsto- "Oil-filled" high-grade steel measuring cell
ne bridge. The values of these resistors change proportionally to (Isolated Piezoresistive)
the pressure load present at the measuring cell or membrane. The
bridge voltage of the measuring cell is amplified in the evaluation IIn this measuring cell technology, the piezo-resistive measuring
electronics (2) and a calibrated signal is established in the signal cell is packaged within a metallic housing filled with fluorine or
conditioner / microcontroller (3). silicone oil. This means the measuring cell is virtually free of exter-
nal mechanical stresses. Fluorine oil has excellent characteristics as
The downstream output stage (4) converts this signal to the out- regards temperature and ageing behaviour, and is not flammable
put signal required (such as 4 - 20 mA, 0 – 5 V, or 0 – 10 V). and so lends itself perfectly to deployment in oxygen applications.
It is not recommended for food applications.

Ceramic measuring cell / thick film technology

Ceramic thick film pressure measuring cells are made up of a sin-

ELECTRICAL tered ceramic body. The ceramic body sleeve already has the key
CONNECTION
geometries for the subsequent pressure range and thus, the pres-
sure range required is established with grinding and lapping. The
4 resistors are imprinted with thick film technology and interconnect
3 to form a measuring bridge.

2
Bonded foil measuring cell
1 Bonded foil pressure measuring cells are based on the same prin-
ciple as a strain gauge. Four foil gauges, made from constantan on
a flexible polyimide backing, are bonded to a high-grade steel dia-
phragm in the form of a Wheatstone bridge circuit. The diaphragm
PRESSURE flexes and strains in response to an applied pressure and causes
CONNECTION an electrical resistance change in the strain gauges producing a
sensitivity of 2 mV/V.

Block diagram
Piezoresistive silicon

The measuring cell consists of a piezoresistive silicon sensing

element without a protective membrane. The cell is packaged in
a plastic housing for direct mounting to a printed circuit board.
It is suitable only for air and non-corrosive / non-ionising gases,
and is typically used for very low pressure air differential pressure
measurement.

7
Standard signals bearing on the output signal. In order to guarantee the functiona-
lity of a transmitter, the supply voltage should not fall below the
Output signals 4 - 20 mA, 0 – 5 V and 0- 10 V in particular are esta- minimum operating voltage. The maximum operating voltage
blished in the industry. Unamplified millivolt (mV) output signals may not be exceeded to ensure the electronics are not damaged
are available for some variants. Also offered are transmitters with beyond repair.
digital USB output or customer-specific output signals (such as
1 – 5 V). Accuracy

Output configuration v ESI defines accuracy as the combined error due Non-linearity,
Hysteresis and Repeatability (NLHR), defined at room tempe-
The output configuration for a 4-20 mA signal is a 2 wire connec- rature and condition as new. The maximum deviation from an
tion. For 0-5 V and 0-10 V signals, the configuration is either 3 wire ideal characteristic curve is defined in accordance with Best Fit
or 4 wire connection depending on the model variant. All mV Straight Line (BFSL) method. Other factors that have a bearing on
outputs are 4 wire accuracy, such as zero and span tolerance and temperature error,
are specified separately.
Load / apparent ohmic resistance for pressure
transmitters

An appropriate ohmic load must be connected to guarantee per-

fect functioning of a pressure transmitter.
The load resistance for transmitters with a voltage output; 0 – 5 V
should be at greater than 5 kΩ, and for 0-10 V should be greater
than 10 kΩ For mV output the measuring instrument input impe-
dance should be as high as possible to reduce loading errors and
should be no lower than 1 MΩ
For transmitters with a current output (4 - 20 mA), the maximum
load is calculated using the following formula:
Temperature errors and ranges

Uv+ _ Uv+(min) The temperature (for both ambient and medium) generally has a
RL = significant bearing on the accuracy of a pressure transmitter. Pres-
20mA
sure transmitters are temperature compensated over a particular
Where U_(v+) (UB) is the actual supply voltage and Uv+ (min) is range corresponding to the typical application. This means that
the minimum supply voltage to be taken from the data sheet. For temperature errors within this temperature range are minimised
example with a supply voltage range 10 – 36 VDC and thus Uv+ by means of circuitry design and algorithms. The temperature
(min) = 10 V, this gives the following operating range for example: error is added to the accuracy and is shown in the total error band
of the pressure transmitter, also called "butterfly graph". The maxi-
mum error is not defined outside the compensated temperature
range but the transmitter will still function however. To prevent
mechanical and electrical damage, pressure transmitters may not
be deployed beyond the threshold temperature ranges specified
in the data sheet.

Operating/supply voltage

All pressure transmitters work with DC voltage and have no

galvanic isolation. Within the thresholds specified in the relevant
8
data sheet, the supply voltage may change without it having a
 Our Ex Certification
for ESI Pressure Sensors

Our Ex Certification
ESI has an extensive range of intrinsically safe transmitters,
all ATEX and IECEx approved for explosion protection for
flammable gases (zone 0), dusts (zone 20) and mining areas
(group I M1).

II 1 G Ex ia IIC T4 Ga
II 1 D Ex ia IIIC T135°C Da
I M 1 Ex ia I Ma

9
Putting safety first in explosive to occur during normal operations or will exist for only a brief
environments….. period of time.

Our range of Ex certified pressure transmitters have both ATEX

and IECEx approval.

ATEX is an EU Directive (94/9/EC) that ensures products are safe to

use in explosive environments.

IECEx scheme certifies worldwide conformity to international stan-

dards and provides assurance that equipment for use in explosive
atmospheres are manufactured and operated according to the
highest International Standards of safety.

The most common protection method for process instrumenta-

tion is Intrinsic Safety (IS) and this is the protection method used
in ESI transmitters. With these instruments the low voltage elec-
tronics is designed in such a way that it is incapable of releasing
enough energy thermally or electrically to cause an ignition of
flammable gases or liquids. To achieve this there are limitations
set on levels of voltage, current, capacitance and inductance such
that the available energy at a sparking device is below the mini-
mum ignition energy of the potentially explosive atmosphere.
Zone 0 and 20 require Category 1 marked equipment, Zone 1 and
Intrinsic safety equipment must undergo Type Examination by an 21 require Category 1 or 2 marked equipment and Zone 2 and 22
approved third party. It involves a detailed process of examination, require Category 1, 2, or 3 marked equipment. Zone 0 and 20 are
testing and assessment of equipment confirming and demonst- the zones with the highest risk of an explosive atmosphere being
rating that the product is safe to use within potentially explosive present
atmospheres. The certification process must be undertaken by a
Notified Body. Using an Intrinsically Safe Barrier

Hazardous Zone Classification The essential concept behind intrinsic safety is the restriction of
electrical energy to apparatus, and the interconnecting wiring
Hazardous areas are classified into zones exposed to the potentially explosive atmosphere, to a level that
(0, 1, 2 for gas-vapour-mist and 20, 21, 22 for dust) will not cause ignition by either sparking or heating effects. It is
therefore a low-energy signaling technique that prevents explo-
The zones are determined by the type of combustible material sions from occurring by ensuring that the energy transferred to
present, the length of time it is present, and the physical construc- a hazardous area is well below the energy required to initiate an
tion of the area where such material is present. explosion.

Zone 0 or 20 locations are those areas where ignitable or flam- This is achieved by limiting the electrical energy transferred to a
hazardous area through the use of an Intrinsic Safety Barrier situa-
mable concentrations of combustible gases or dusts exist conti-
ted in a safe area.
nuously or for long periods of time
Intrinsic Safety Barriers provide both power and signal isolation. A
Zone 1 or 21 locations are those areas where ignitable or flam- safety barrier is used between the "safe area" and the "hazardous
mable concentrations of combustible gases or dusts are likely to area" so that any fault that generates a high energy level would
or frequently exist during normal operations not get carried over to the hazardous area.

Zone 2 or 22 locations are those areas where ignitable or flam- Contact the sales team for more
mable concentrations of combustible gases or dusts are not likely information [email protected]
10
 Selection Matrix

Isolated Piezoresistive Silicon

Bonded Foil Strain Gauge

Piezoresistive Silicon
Silicon-on-Sapphire

Ceramic Thick Film

Page Number

No. of wires
 Standard
 Option

Output
Hispec HI2000 Pressure Transducer, cable outlet 37 10mV/V 4 
High HI2001 Pressure Transducer, cable outlet 37 0-5 V 4 
Specification HI2004 Pressure Transducer, cable outlet 37 0-5 V 3 
HI2002 Pressure Transducer, cable outlet 37 0-10 V 4 
HI2005 Pressure Transducer, cable outlet 37 0-10 V 3 
HI2010 Pressure Transducer, MIL-C-26482 37 10mV/V 4 
HI2011 Pressure Transducer, MIL-C-26482 37 0-5 V 4 
HI2014 Pressure Transducer, MIL-C-26482 37 0-5 V 3 
HI2012 Pressure Transducer, MIL-C-26482 37 0-10 V 4 
HI2015 Pressure Transducer, MIL-C-26482 37 0-10 V 3 
Hispec HI2200 Transducer Unrationalised, Cable Outlet, max. 200⁰C 47 10-20mV/V 4 
High HI2210 Transducer Unrationalised, MIL-C-26482, max. 200⁰C 47 10-20mV/V 4 
Temperature HI2300 Transducer Compensated, Cable Outlet, max. 200⁰C 47 10mV/V 4 
HI2310 Transducer Compensated, MIL-C-26482, max. 200⁰C 47 10mV/V 4 
Genspec GS4200 Silicon-on-Sapphire, Pressure Transmitter 25 4-20mA 2 
General GS4201 Silicon-on-Sapphire, Pressure Transducer 25 10mV/V 4 
Purpose GS4202 Silicon-on-Sapphire, Pressure Transducer 25 0-5 V 4 
GS4212 Silicon-on-Sapphire, Pressure Transducer 25 0-5 V 3 
GS4203 Silicon-on-Sapphire, Pressure Transducer 25 0-10 V 4 
GS4213 Silicon-on-Sapphire, Pressure Transducer 25 0-10 V 3 
USB GS4200-USB Digital Pressure Transducer USB Interface 21 USB n/a 
GD4200-USB Dynamic Digital Pressure Transducer USB Interface 21 USB n/a 
Genspec GS4000 Pressure Transducer, Micro DIN connector 67 2mV/V 4 
Standard GS4001 Pressure Transducer, Micro DIN connector 67 0-5 V 4 
Industrial GS4011 Pressure Transducer, Micro DIN connector 67 0-5 V 3 
GS4002 Pressure Transducer, Micro DIN connector 67 0-10 V 4 
GS4012 Pressure Transducer, Micro DIN connector 67 0-10 V 3 
GS4003 Pressure Transmitter, Micro DIN connector 67 4-20mA 2 
GS4100 Pressure Transducer, Micro DIN connector 67 2mV/V 4 
GS4101 Pressure Transducer, Micro DIN connector 67 0-5 V 4 
GS4111 Pressure Transducer, Micro DIN connector 67 0-5 V 3 
GS4102 Pressure Transducer, Micro DIN connector 67 0-10 V 4 
GS4112 Pressure Transducer, Micro DIN connector 67 0-10 V 3 
GS4103 Pressure Transmitter, Micro DIN connector 67 4-20mA 2 
Protran PR3100 Standard Industrial Pressure Transmitter 69 4-20mA 2  
Process PR3101 Standard Industrial Pressure Transducer 69 2mV/V 4  
PR3102 Standard Industrial Pressure Transducer 69 0-5 V 4  
PR3103 Standard Industrial Pressure Transducer 69 0-10 V 4  
PR3110EX ATEX/IECEx Certified Low Pressure Transmitter 43 4-20mA 2 
Protran PR3200 Silicon-on-Sapphire, Liquid Pressure Transmitter 63 4-20mA 2 
Differential PR3202 Air/Non-corrosive Gas Pressure Transmitter 63 4-20mA 2 
PR3203 Air/Non-corrosive Gas Pressure Transducer 63 0-5 V 3 
11 PR3204 Air/Non-corrosive Gas Pressure Transducer 63 0-10 V 3 




Differential











Hazardous Area option

























High Accuracy



High Pressure (>1500Bar)

Flush Diaphragm















High Specification





High Temperature (>125oC)





Low Pressure (< 500mBar)

Wireless























Aerospace









Automotive




Clean Room
















Defence


Depth & Level



























General Purpose






















Hydraulic

Hygienic


























Oil & Gas




























Process

Subsea




























Test & Calibration









Marine

12
 Selection Matrix

Isolated Piezoresistive Silicon

Bonded Foil Strain Gauge

Piezoresistive Silicon
Silicon-on-Sapphire

Ceramic Thick Film

Page Number
 Standard

No. of wires
 Option

Output
Protran PR3420 Pressure Transmitter, Sludge Platform 53 4-20 mA 2 
Submersible PR3441 Pressure Transmitter, Pu Vented Cable 53 4-20 mA 2 
Depth/Level PR3442 Slimline Pressure Transmitter, 16 mm diameter 53 4-20 mA 2 
Protran PR3800 Pressure Transmitter Pipe Clamp 57 4-20mA 2 
Flush PR3801 Pressure Transducer Pipe Clamp 57 0-5 V 4 
Diaphragm PR3802 Pressure Transducer Pipe Clamp 57 0-10 V 4 
PR3820 Pressure Transmitter DIN11851 / SMS / RJT 57 4-20mA 2 
PR3821 Pressure Transducer DIN11851 / SMS / RJT 57 0-5 V 4 
PR3822 Pressure Transducer DIN11851 / SMS / RJT 57 0-10 V 4 
PR3850 Pressure Transmitter 1/2" BSP (G1/2) 59 4-20mA 2 
PR3851 Pressure Transducer 1/2" BSP (G1/2) 59 0-5 V 4 
PR3852 Pressure Transducer 1/2" BSP (G1/2) 59 0-10 V 4 
PR3860 High Temperature Pressure Transmitter 1/2" BSP (G1/2) 49/59 4-20mA 2 
PR3861 High Temperature Pressure Transducer 1/2" BSP (G1/2) 49/59 0-5 V 4 
PR3862 High Temperature Pressure Transducer 1/2" BSP (G1/2) 49/59 0-10 V 4 
Protran PR3900 Hazardous Area Pressure Transmitter 41 4-20mA 2 
Oil & Gas PR3913 Control Valve Pressure Transmitter 17 4-20mA 2 
PR3914 Subsea Pressure Transmitter 17 4-20mA 2 
PR3915 Subsea Dual Redundant Pressure Transmitter 17 4-20mA 2 
PR3920 Subsea DP Control Valve Pressure Transmitter 17 4-20mA 2 
Protran PR9000 Process Pressure Transmitter 73 4-20mA 2 
Heavy Duty PR9500 Wireless Pressure Transmitter 74 4-20mA 2 
Hipres HP1000 Silicon-on-Sapphire Transducer to 2,000 bar 29 10 mV/V 4 
High Pressure HP1001 Silicon-on-Sapphire Transducer to 2,000 bar 29 0-5 V 4 
HP1011 Silicon-on-Sapphire Transducer to 2,000 bar 29 0-5 V 3 
HP1002 Silicon-on-Sapphire Transducer to 2,000 bar 29 0-10 V 4 
HP1012 Silicon-on-Sapphire Transducer to 2,000 bar 29 0-10 V 3 
HP1003 Silicon-on-Sapphire Transducer to 2,000 bar 29 4-20mA 2 
HP1100 Silicon-on-Sapphire Transducer to 5,000 bar 29 10mV/V 4 
HP1101 Silicon-on-Sapphire Transducer to 5,000 bar 29 0-5 V 4 
HP1111 Silicon-on-Sapphire Transducer to 5,000 bar 29 0-5 V 3 
HP1102 Silicon-on-Sapphire Transducer to 5,000 bar 29 0-10 V 4 
HP1112 Silicon-on-Sapphire Transducer to 5,000 bar 29 0-10 V 3 
HP1103 Silicon-on-Sapphire Transducer to 5,000 bar 29 4-20mA 2 
Lopres LP1000 Air and Liquid Transducer 33 10mV/V 4 
Low Pressure LP1001 Air and Liquid Transducer 33 0-5 V 4 
LP1011 Air and Liquid Transducer 33 0-5 V 3 
LP1002 Air and Liquid Transducer 33 0-10 V 4 
LP1012 Air and Liquid Transducer 33 0-10 V 3 
LP1003 Air and Liquid Transducer 33 4-20mA 2 

13
 
Differential














Hazardous Area option


















High Accuracy















High Pressure (>1500Bar)















Flush Diaphragm






High Specification






High Temperature (>125oC)










Low Pressure (< 500mBar)


Wireless

Aerospace













Automotive







Clean Room



Defence













Depth & Level














General Purpose




















Hydraulic
















Hygienic























Oil & Gas






































Process









Subsea























Test & Calibration
















Marine

14
 S.01 Special Solutions

Application specific design solutions

Customised housing design

Choice of output signals and pressure ranges

Specialised process connections

Various electrical connector options

Special housing materials

15
 S.01

From Conception to Completion…

The custom design service from ESI.
Whatever your application may be, there are times when your requirements are not straightforward and you
need a tailor made pressure measurement solution to your unique specifications.

ESI Technology specialise in the design and manufacture of pressure transducers and transmitters for a wide range of industries.

In addition to the standard range of instruments, a team of qualified engineers, with extensive experience in electronic, software and
mechanical instrumentation offer a complete design service using the latest technologies. The team are able to analyse and interpret
customers’ specific requirements and create a product that meets, and often exceeds, the exact needs of the application in order to
eradicate any compromise from the customer.

The ability to design bespoke solutions, often just minor adjustments to standard products, is a major benefit to customers in certain
applications. In addition, ESI have the capabilities to take on major design projects and, using extensive in-house pressure and
environmental test equipment, create prototype sensors complete with qualification and first article test reports.

Sensor technology, output signals, pressure ranges, electrical connections and specialised process connections can be adapted to
customer requirements. Stringent quality control and inspection is exercised at every stage of the manufacturing process to ensure our
customers complete satisfaction with the end product, backed up with technical advice and support. Customer focus and high quality is
maintained, regardless of whether the project is small, mid or high volume.

16
 S.02 Oil, Gas & Subsea

PR3914 PR3915

PR3913 PR3920

D
 ual Redundant pressure sensors and electronics

H
 yperbaric testing to 3,300 metres depth

E
 nvironmental Stress Screening (ESS)

S
 pecialised process connections

E
 xtended service life

R
 ange of housing materials

C
 omprehensive documentation package
and certification

17
 S.02

Oil, Gas & Subsea

Oil, gas & subsea applications have become a speciality of ESI. The ability to meet exacting requirements for
these markets can be illustrated by the evolution of the field proven oil & gas and subsea product range which
includes dual redundant and subsea differential designs.

Pressure measurement plays an important role in the oil & gas industry. With the necessity to find oil in less accessible places, the
systems utilised in exploration become more complex and the use of pressure transducers and transmitters is increasing. New and
more challenging applications require specifically designed solutions to cope with higher static pressures, aggressive processes and
environmental conditions. One of our particular areas of expertise is in deep-water subsea applications where we provide specialist
transmitters, often for control valve operation and for immersion up to 6,000 metres with an expected service life of 25 years.

Pressure port threads, output signals, pressure ranges, electrical connections and wetted parts can be tailored to adapt to the harsh
and unforgiving environments synonymous with the oil, gas and subsea industries. At the heart of the design is ESI’s unique Silicon-
on-Sapphire sensor technology; a sensor not only with high sensitivity and stability, but also rugged and resilient against high overload
pressures and transients.

Optional ATEX and IECEx approved versions of this product range are available for explosion protection for flammable gases (zone 0),
dusts (zone 20) and mining areas (group I M1).

Product Conditioning

Pre-conditioning and testing is fundamental to the success of our oil, gas and subsea range. Our investment in hyperbaric test facilities
means that each and every unit we supply has already been subjected to 3,300 metres of submersion before leaving the factory and the
customer can rest assured that there is no concern about leakage or integrity when deploying these pressure transmitters in deep water
subsea applications.

Investment in vibration test equipment and automated thermal chambers means that transmitters can be environmentally screened at ESI
before shipment, confirming that the units are fit and reliable for a long service life on the seabed. This is a major benefit to the customer
as the cost of valve retrieval from a subsea process is extreme.

This investment and commitment means that every customer receives a material requirement package with each transmitter confirming
calibration, accuracy, material conformity, hyperbaric test and ESS test certificates

Documentation Support

The provision of documentation to support products is usually beyond the scope of most quality systems, but we have adapted our
procedures to offer full and comprehensive document support including certificates of conformity, calibration certificates and material
certificates for traceability. Document packages have become a standard requirement in the competitive oil and gas market and ESI are
ready to support any new requirements that arise.

18
 S.03 Genspec Standard GS4200-USB and
Genspec DYNAMIC GD4200-USB
Digital Pressure Transducer

ESI__S.1 HP

Sample rate software selection up to 1,000 Hz

Silicon-on-Sapphire pressure sensor technology

Choice of pressure ranges from vacuum to 5,000 bar

Accuracy (NLHR) ±0.15% of span BFSL

ESI-USB© downloadable software with auto update

Measure & record up to 16 pressure inputs together

Create customised test certificate

Automatic temperature compensation

Support for easy integration with applications created by

C#, VB, Labview and Excel VBA (api dll library)

2m lead & carry case included

19
 S.03

DESCRIPTION
The GS4200-USB and GD4200-USB Digital Pressure Transducer have been designed to measure, analyse and
record pressure directly on your computer without the need for costly I/O interface boards. The user can
measure up to 16 pressure inputs simultaneously and easily create customised test certificates.

The transducer is powered by the computer’s USB port, data is then presented on the PC via the ESI-USB© configurable Windows Interface
software. It has instant connection with auto-detection, and will configure automatically with your desktop, laptop or Windows tablet via
USB protocol.

The GD4200-USB sample rate enables dynamic pressures to be measured with up to 21 bit resolution at user selectable speeds up to 1,000
Hz. For real-time analysis, data transferred to the PC is achieved without loss of accuracy or bandwidth. This pressure transducer is USB 2.0
compatible, the ESI-USB© interface configuration and analysis software is compatible exclusively with Windows© 7 (32bit & 64bit), 8, 8.1
and 10. Data can be displayed in graphical or tabular form, with a choice of pressure units and fully adjustable scales. Data can be saved
to a file or exported to Excel/ PDF.

The unique Silicon-on-Sapphire sensor technology provides outstanding performance and gives excellent stability over a wide tempera-
ture range. Excellent measurement accuracy provides high resolution with a precision greater than 1 in 10,000. Nine pressure ranges have
been carefully selected to enable the user to cover any pressure that the application requires, from vacuum up to 5,000 bar, via the use of
the ESI-USB© digitally self scaling software.

Each unit requires free download of the ESI-USB© software and is supplied with 2m USB lead, rated to IP68, and a convenient carry case.

DIMENSIONS (in mm)

ESI-USB Software

Ø28

~110
GRAPH SCREEN

19 A/F
HEX

12

1/4" BSP (G1/4) 1/4" NPT OR F250-C

MONITOR SCREEN 20
 Genspec Standard GS4200-USB and
Genspec DYNAMIC GD4200-USB
Digital Pressure Transducer

TECHNICAL DATA

Type: GS4200-USB GD4200-USB

Sensor Technology: Silicon-on-Sapphire (SoS)

Output signal: USB 2.0 compatible

Supply Voltage: 5 VDC via USB bus

Pressure Reference: Gauge (default); Absolute reference input by user

-1 to 2.5 bar; 0 - 16 bar; 0 - 100 bar; 0 - 400 bar;

Standard Pressure -1 to 2.5 bar; 0 - 16 bar; 0 - 100 bar; 0 - 400 bar;
0 - 1,000 bar; 0 - 1,500 bar; 0 - 2,000 bar; 0 - 4,000 bar,
Ranges: 0 - 1,000 bar; 0 - 1,500 bar; 0 - 2,000 bar; 0 - 4,000 bar
0 - 5,000 bar
Standard Pressure
User selectable for psi and other measurement units
Ranges (other):
2x up to 400 bar; 1.5x for 1,000 bar; 1.1x for 1,500 bar;
2x up to 400 bar; 1.5x for 1,000 bar; 1.1x for 1,500 bar;
Overpressure Safety: 1.5x for 2,000 bar; 1.25x for 4,000 bar; 1.2x for 5,000
1.5x for 2,000 bar; 1.25x for 4,000 bar
bar;

Accuracy NLHR: ≤ ±0.15 % of span BFSL

User selectable to 1,000 samples per second (1,000

User selectable to 5 readings per second (5Hz);
Sample Rate: Hz) Resolution: 21 bits for ≤5 Hz; 16 bits for
resolution ³ 21 bits
>5 - 1,000 Hz
Operating Ambient
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:
Operating Media
-50 °C to +125 °C (-58 °F to +257 °F)
Temperature:

Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice

±1.5 %FS total error band for -20 °C to +70 °C. Typical ±1.5 %FS total error band for -10 °C to +80 °C. Typical
Temperature Effects:
thermal zero and span coefficients ±0.015 %FS/ °C thermal zero and span coefficients ±0.015 %FS/ °C
Electromagnetic
EN61326-1, EN61326-2-3 (Laboratory equipment)
Compatibility:

Wetted Parts: Titanium alloy

Pressure Media: All fluids compatible with titanium alloy

Pressure Connection: 1/4“ BSP male (G1/4); 1/4“ NPT male or F250-C (Autoclave)

Electrical Connection: Mating to USB mini B socket for cable connection to PC. Supplied with 2m USB lead rated to IP68 as standard.

Software compatibility: Windows 7, Windows 8, Windows 8.1 and Windows 10

21
 S.03
Genspec

ORDER MATRIX

Output Type Electrical Pressure Process

Wires Connector Range Connection
Standard (20 Hz) GS4200-USB
Dynamic (1,000 Hz) GD4200-USB

Electrical Connection / Option

Mating to USB mini B socket –

Pressure Range in bar

-1 to 2.5 bar 02.5
0-16 bar 0016
0-100 bar 0100
0-400 bar 0400
0-1,000 bar 1000
0-1,500 bar 1500
0-2,000 bar 2000
0-4,000 bar 4000
0-5,000 bar (Dynamic only) 5000

Process Connection
1/4" BSP male (G1/4) AB
1/4“ NPT male AM
Autoclave F-250-C female (for pressures above 1500bar) DE
GS4200-USB
Order Number Example GD4200-USB1500AB

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards. GD4200-USB 22
 S.04 Genspec GS4200
General Purpose Pressure Transmitter

ESI__S.1 HP

Silicon-on-Sapphire sensor technology

for outstanding performance

Pressure ranges to 1,500 bar

Unblemished track record of reliability

Excellent corrosion resistance

High strength titanium pressure port

High resistance to overpressure and pressure transients

ATEX/IECEx option available (includes M1

for mining applications)

DNV GL certification available

23
 S.04

DESCRIPTION
The GENSPEC GS4200 pressure transmitter is designed to meet the operational requirements of demanding
pressure measurement applications where good quality, quick delivery and value for money are of the highest
priority.

The unique Silicon-on-Sapphire sensor technology provides outstanding performance and gives excellent stability over a wide
temperature range. Standard accuracy is ± 0.25% with a typical over pressure limit of twice the rated pressure range, this together with
a selection of outputs and easy access for re-calibration affirm the excellent design. All models are supplied with integral 1/4” BSP or
alternative pressure connections. The all titanium alloy wetted parts offer unbeatable corrosion resistance. Versions are also available
offering IP67 sealing for installations requiring high levels of environmental protection.

Applications for the GS4200 include the continuous monitoring of hydraulic systems with oil, gas, water and other process liquids,
industrial, medical and aerospace industries. Also ideal for the measurement and control of pressure in refrigeration, pneumatic,
compressor, HVAC and engine monitoring systems.

An optional ATEX and IECEx approved version of this product is available for explosion protection for flammable gases (zone 0), dusts (zone
20) and mining areas (group I M1).

DNV GL rules for classification of ships, high speed & light craft and DNV GL offshore standards.

DIMENSIONS (in mm)

~35

PG9

~126
ELECTRICAL CONNECTION (mA)

Pin. No. 2 wire

1 + supply
2 4-20 mA signal
3 not fitted
to case

19 A/F HEX ELECTRICAL CONNECTION (V)

12 Pin. No. 4 wire 3 wire

1 - supply common
2 + supply + supply
¼”BSP male (G1/4)* 3 + output + output
* Other threads available - output to case
24
 Genspec GS4200
General Purpose Pressure Transmitter

TECHNICAL DATA

Type: GS4200 GS4201 GS4202/GS4212 GS4203/GS4213

Sensor Technology Silicon-on-Sapphire (SoS)

Output signal: 4 - 20 mA (2 wire) 0 - 10 mV/V (4 wire) 0 - 5 V (4 or 3 wire) 0 -10 V (4 or 3 wire)
Supply Voltage: 10 - 36 VDC 10 VDC (5 - 15V) 13 - 30 VDC 13 - 30 VDC
Pressure Reference: Gauge
Protection of Supply
Protected against supply voltage reversal up to 50 V (amplified versions)
Voltage:
Standard Pressure 0-1 bar Vac; 0-0.5 bar; 0-1 bar; 0-2.5 bar; 0-6 bar; 0-10 bar; 0-16 bar; 0-25 bar; 0-100 bar; 0-250 bar; 0-400 bar;
Ranges (bar): 0-600 bar; 0-1,000 bar; 0-1,500 bar (other ranges available)
Standard Pressure 0-30 in Hg; 0-7.5 psi; 0-15 psi; 0-30 psi; 0-100 psi; 0-150 psi; 0-200 psi; 0-300 psi; 0-1,500 psi; 0-3,000 psi; 0-6,000
Ranges (psi): psi; 0-8,700 psi; 0-15,000 psi; 0-20,000 psi (other ranges available)
Overpressure Safety: 4x for 0.5 bar range; 2x for ranges -1 bar to 600 bar; 1.5x for 1,000 bar range; 1.1x for 1,500 bar range
4-20 mA: RL < [UB - 10 V] / 20 mA (e.g. with supply voltage (UB) of 36 V, max. load (RL) is 1300 Ω) 10 mV/V:
Load Driving Capability:
n/a; 0-5 V: max. load RL > 5 KΩ; 0-10 V: max. load RL > 10 KΩ
Accuracy NLHR: ≤ ±0.25 % of span BFSL (Optional higher accuracy version of ≤ ±0.1 % of span BFSL available)
Zero Offset and ±0.5 %FS at room temperature (GS4201: ±1 mV); ±5 %FS (approx.) adjustment with easy access trimming
Span Tolerance: potentiometers on amplified versions only
Operating Ambient Temperature: -40 °C to +85 °C (-40 °F to +185 °F)
Operating Media Temperature: -50 °C to +125 °C (-58 °F to +257 °F)
Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice
Temperature Effects: ±1.5 %FS total error band for -20 °C to +70 °C. Typical thermal zero and span coefficients ±0.015 %FS /°C
Ex II 1 G Ex ia IIC T4 Ga (zone 0)
ATEX/IECEx Approval Ex II 1 D Ex ia IIIC T135 °C Da
n/a n/a n/a
(4-20 mA version only): (zone 20)
Ex I M 1 Ex ia I Ma (group 1 M1)
Ui = 28 V
Ii = 119 mA
Pi = 0.65 W
ATEX/IECEx Safety Li = 0.1 µH
Ci = 74 nF n/a n/a n/a
Values: Temperature Range = -20 °C to
+70 °C
Max. cable length = 45 m

DNV GL Approval Class: Temperature: D; Humidity: B; Vibration: B; EMC: B; Enclosure: C (contact sales for more information)
Electromagnetic
Emissions: EN61000-6-3; Immunity: EN61000-6-2; Certification: CE Marked
Capability:
Insulation Resistance: > 100 MΩ @ 50 VDC
Response time 10-90 %: 1 mS
Titanium alloy (1/4“ BSP male (G1/4) and 1/4“ NPT male thread); other thread options typically Titanium allo-
Wetted Parts:
y/316L stainless steel
All fluids compatible with Titanium alloy (1/4“ BSP male (G1/4) and 1/4“ NPT male); other threads typically
Pressure Media:
Titanium alloy/316L stainless steel
1/4“ BSP male (G1/4); 1/4“ NPT male; 1/4“ BSP male (G1/2); 1/2“ NPT male and 1/4“ BSP female
Pressure Connection:
(others options available)
Mating socket EN175301-803 Form A (ex DIN43650) rated IP65 with PG9 cable entry
25 Electrical Connection:
(other options available)
 S.04
Genspec

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
4-20 mA 2 GS4200
10 mV/V 4 GS4201
4 GS4202
0-5 V
3 GS4212
4 GS4203
0-10 V
3 GS4213

Electrical Connection / Option

DIN EN175301 plug and socket –
Cable outlet 1m screened A
M12 connector B
Cable outlet 1m screened IP67 protection C
ATEX/ IECEx certified with DIN EN175301 plug
EX
and socket

Pressure Range in bar

0-1 bar Vac V001
0-0.5 bar 00.5
GS4200
0-1 bar 0001
0- 2.5 bar 02.5
0-6 bar 0006
0-10 bar 0010
0- 16 bar 0016
0-25 bar 0025
0-100 bar 0100
0-250 bar 0250
0-400 bar 0400
0-600 bar 0600
0-1000 bar 1000
0-1,500 bar 1500

Process Connection
1/4" BSP male (G1/4) AB
1/2“ BSP male (G1/2) AC
1/4" NPT male AM
1/2" NPT male AN

Order Number Example GS4200B1500AB

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards. 26
 S.05 Hipres HP1000 Series
High Pressure Transmitter

ESI__S.1 HP

Pressure ranges to 5,000bar

High pressure integrity for safe use due to

unique sensor design.

Pressure diaphragm and process connection is machined

from one piece of Titanium with no seals or welds.

High resistance to overpressure and pressure transients

Silicon-on-Sapphire (SoS) sensor technology for

outstanding performance and reliability

ATEX/IECEx option available (includes M1 for

mining applications) for 4-20mA versions

DNV GL Certification available

27
 S.05

DESCRIPTION
The HP1000 series extends the Silicon-on-Sapphire pressure sensor technology
into very high pressure applications, with operating ranges up to 5,000 bar and
still maintaining an extremely high performance level.

The unique Silicon-on-Sapphire sensor provides outstanding performance and gives excellent stability
over a wide temperature range. The wetted parts and diaphragm are machined from a single piece of
titanium alloy which means no weld joints and therefore high pressure integrity and overload capacity.
Available in pressure ranges from 0-600 bar to 0-5,000 bar and with electrical outputs of 0-10 mV/V,
0-5 V, 0-10 V and 4-20 mA. Applications include aerospace, laboratory and test, oil and gas monitoring
equipment and general industrial.

An optional ATEX and IECEx approved version of this product is available for explosion protection for
flammable gases (zone 0), dusts (zone 20) and mining areas (group I M1).

DNV GL rules for classification of ships, high speed & light craft and DNV GL offshore standards.

DIMENSIONS (in mm)

~ 35

PG9

~ 113 ELECTRICAL CONNECTION (mA)

Pin. No. 2 wire

1 + supply
2 4-20 mA signal
3 N\C
to case

ELECTRICAL CONNECTION (V)

12 Pin. No. 4 wire 3 wire

1 - supply common
2 + supply + supply
3 + output + output
22 A/F HEX
- output to case
28
 Hipres HP1000 Series
High Pressure Transmitter

TECHNICAL DATA

Type: HP1000/HP1100 HP1xx1 HP1xx2 HP1003/HP1103

Sensor Technology: Silicon-on-Sapphire (SoS)
Output signal: 10 mV/V (4 wire) 0-5 V (3 or 4 wire) 0-10 V (3 or 4 wire) 4-20 mA (2 wire)
Supply Voltage: 10 VDC (5-15V) 13-30 VDC 13-30 VDC 10-36 VDC
Pressure Reference: Gauge
Protection of Supply
Protected against supply voltage reversal up to 50 V (amplified versions)
Voltage:
Standard Pressure HP10xx: 0 - 600 bar; 0 - 700 bar; 0 - 1,000 bar; 0 - 1,500 bar; 0-2,000 bar. HP11xx: 0 - 2,500 bar; 0 - 4,000 bar;
Ranges (bar): 0 - 5,000 bar (other ranges available)
Standard Pressure 0-10,000 psi; 0-15,000 psi; 0-20,000 psi; 0-30,000 psi; 0-40,000 psi; 0-60,000 psi; 0-72,000 psi
Ranges (psi): (other ranges available)

Overpressure Safety: 1.5x for ranges 0 - 600 bar to 0 - 3,000 bar; 1.25x for 4,000 bar; 1.2x for 5,000 bar

4 - 20 mA: RL < [UB - 10 V] / 20 mA (e.g. with supply voltage (UB) of 36 V, max. load (RL) is 1300 Ω); 10 mV/V:
Load Driving Capability:
n/a; 0 - 5 V: max. load RL > 5 KΩ; 0 - 10 V: max. load RL > 10 KΩ

Accuracy NLHR: ≤ ±0.25 % of span BFSL (Optional higher accuracy version of ≤ ±0.1 % of span BFSL available)

Zero Offset and ±0.5 %FS at room temperature (HP1000/HP1100: ±1 mV); ±5 %FS (approx.)
Span Tolerance: adjustment with easy access trimming potentiometers on amplified versions only

Operating Ambient Temperature: -40 °C to +85 °C (-40 °F to +185 °F)

Operating Media Temperature: -50 °C to +125 °C (-58 °F to +257 °F)
Storage Temperature: 5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice

Temperature Effects: ±1.5 %FS total error band for -20 °C to +70 °C. Typical thermal zero and span coefficients ±0.015 %FS/ °C

ATEX/IECEx Approval Ex II 1 G Ex ia IIC T4 Ga (zone 0)

Option (4-20mA version n/a n/a n/a Ex II 1 D Ex ia IIIC T135 °C Da (zone 20)
only): Ex I M 1 Ex ia I Ma (group 1 M1)

Ui = 28 V; Ii = 119 mA;
ATEX/IECEx Safety Values: Pi = 0.65 W; Li = 0.1 µH;
n/a n/a n/a Ci = 74 nF; Temperature Range = -20
°C to +70 °C Max. cable length = 45 m

DNV GL Approval Class: Temperature: D; Humidity: B; Vibration: B; EMC: B; Enclosure: C (contact sales for more information)
Electromagnetic Capability: Emissions: EN61000-6-4; Immunity: EN61000-6-2; Certification: CE Marked
Insulation Resistance: > 100 MΩ @ 50 VDC
Response time 10-90 %: 1 mS
Titanium alloy machined from a single piece (≥1,000 bar);
Wetted Parts:
Titanium alloy and SAE 316 stainless steel (<1,000 bar)
All fluids compatible with Titanium alloy (≥1,000 bar); All fluids compatible with
Pressure Media:
Titanium alloy and SAE 316 stainless steel (<1,000 bar)
Pressure Connection: F250-C Autoclave fitting; thread type 9/16-18UNF-2B female or M16 x 1.5 female cone seal

Mating socket EN175301-803 Form A (ex DIN43650) rated IP65 with PG9 cable entry
Electrical Connection:
29 (other options available)
 S.05
Hipres

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
Model to 2,000 bar
4 HP1000
10 mV/V (incl. 30,000 psi)
Model above 2,000 bar 4 HP1100
Model to 2,000 bar
4 HP1001
(incl. 30,000 psi)
Model above 2,000 bar 4 HP1101
0-5 V
Model to 2,000 bar
3 HP1011
(incl. 30,000 psi)
Model above 2,000 bar 3 HP1111
Model to 2,000 bar
4 HP1002
(incl. 30,000 psi)
Model above 2,000 bar 4 HP1102
0-10 V
Model to 2,000 bar
3 HP1012
(incl. 30,000 psi)
Model above 2,000 bar 3 HP1112
Model to 2,000 bar
2 HP1003
4-20 mA (incl. 30,000 psi)
Model above 2,000 bar 2 HP1103

Electrical Connection / Option

DIN EN175301 plug and socket – HP1103
Cable outlet 1m screened A
M12 connector B
Cable outlet 1m screened IP67 protection C
ATEX/ IECEx certified with DIN EN175301
EX
plug and socket

Pressure Range in bar

0-600 bar 600
0-1,000 bar 1000
0-1,500 bar 1500
0-2,000 bar 2000
0-3,000 bar 3000
0-4,000 bar 4000
0-5,000 bar 5000

Process Connection
Autoclave F-250-C female DE
M16 x 1.5 female cone seal FK

Order Number Example HP1000A1000DE

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards. 30
 S.06 Lopres LP1000 Series
Low Pressure Transmitter

ESI__S.1 HP

Piezoresistive sensor technology for high performance

Low pressure measurement from 50 mbar

Robust stainless steel construction for durability

Low hysteresis and excellent long term stability

Wide operating temperature

On-site zero and span adjustment

31
 S.06

DESCRIPTION
LP1000 series transmitters are designed for very low-pressure applications, with
operating ranges down to 0-50 mbar whilst still maintaining high performance.
The advanced sensor design provides very low hysteresis and excellent long-term
stability not normally achievable when measuring very low pressure.

The LP1000 is suitable for use with most liquids in pressure ranges 0-100 mbar or above. For pressure
ranges below 100 mbar, LP1000 can be used with air, non-corrosive gases and various liquids
compatible with silicon. The stainless steel housing, fluorosilicone seals and silicon sensing element
enables the product to maintain accurate performance and provide extremely good durability. Availa-
ble in pressure ranges from 0-50 mbar to 0-1,000 mbar and with electrical outputs of 0-100 mV, 0-5 V,
0-10 V and 4-20 mA.

Applications include laboratory and test, air and gas pressure monitoring, leak detection, low pressure
liquid and hydrostatic pressure measurements.

DIMENSIONS (in mm)

~35

PG9

110
ELECTRICAL CONNECTION (mA)

75 Pin. No. 2 wire

1 + supply
2 4-20 mA signal
3 N/C
to case

27 A/F HEX
ELECTRICAL CONNECTION (V)

14 Pin. No. 4 wire 3 wire

1 - supply common
2 + supply + supply
3 + output + output
- output to case
32
 Lopres LP1000 Series
Low Pressure Transmitter

TECHNICAL DATA

Type: LP1000 LP10x1 LP10x2 LP1003

Sensor Technology: Piezoresistive Silicon or Isolated Piezoresistive Silicon

Output signal: 10 mV/V typical (4 wire) 0-5 V (4 or 3 wire) 0-10 V (4 or 3 wire) 4-20 mA (2 wire)

Supply Voltage: 10 VDC 13-30 VDC 13-30 VDC 10-36 VDC

Pressure Reference: Gauge or Absolute (limited ranges)
Protection of Supply
Protected against supply voltage reversal up to 50 V (amplified versions)
Voltage:
Standard Pressure 0-50 mbar; 0-100 mbar; 0-250 mbar; 0-500 mbar; 0-1,000 mbar (other ranges available);
Ranges (bar): Absolute ranges from 0-500 mbar
Standard Pressure
0-0.75 psi; 0-1.5 psi; 0-3 psi; 0-4 psi; 0-5 psi; 0-6 psi; 0-7.5 psi; 0-10 psi; 0-15 psi (other ranges available)
Ranges (psi):
Overpressure Safety: 4x for ranges 50 mbar to 250 mbar; 3x for ranges 500 mbar to 1,000 mbar
4-20 mA: RL < [UB - 13 V] / 20 mA; (e.g. with supply voltage (UB) of 36V, max. load (RL) is 1150 Ω; 10 mV/V: n/a;
Load Driving Capability:
0-5 V: max. load RL > 5 KΩ; 0-10 V: max. load RL > 10 KΩ
Accuracy NLHR: ≤ ±0.5 % of span BFSL
Zero Offset and ±0.5 %FS at room temperature (LP1000: ±1 mV); ±5 %FS (approx.)
Span Tolerance: adjustment with easy access trimming potentiometers on amplified versions only
Operating Media
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:
Operating Media
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:

Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice

Temperature Effects: ±3.0 %FS total error band for -20 °C to +70 °C. Typical thermal zero and span coefficients ±0.05 %FS/ °C

Electromagnetic
Emissions: EN61000-6-4; Immunity: EN61000-6-2; Certification: CE Marked
Capability:

Insulation Resistance: > 100 MΩ @ 50 VDC

Response time 10-90 %: 1 mS

≥100mbar: SAE 316 stainless steel and Nitrile NBR O-ring; <100mbar: SAE 316 stainless steel, Nitrile NBR
Wetted Parts:
O-ring, silicon diaphragm, glass filled polyamide

≥100mbar: All fluids compatible with SAE 316 stainless steel and Nitrile NBR; <100mbar: Non-corrosive,
Pressure Media:
non-ionic fluids, air & dry gases

Pressure Connection: 1/4" BSP male (G1/4); 1/4" NPT male; 1/4" BSP male (G1/2); 1/2" NPT male (other options available)

Electrical Connection: Mating socket EN175301-803 Form A (ex DIN43650) rated IP65 with PG9 cable entry (other options available)

33
 S.06
Lopres

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
10 mV/V 4 LP1000
4 LP1001
0-5 V
3 LP1011
4 LP1002
0-10 V
3 LP1012
4-20 mA 2 LP1003

Electrical Connection / Option

DIN EN175301 plug and socket –
Cable outlet 1m screened A
M12 connector B
Cable outlet 1m screened IP67 protection C

Pressure Range in bar

0-50 mbar (Gauge only) 0050
0-100 mbar (Gauge only) 0100
0-250 mbar (Gauge only) 0250
0-500 mbar 0500
0-500 mbar Absolute 500A

Process Connection
1/4“ BSP male (G1/4) AB LP1003
1/2" BSP male (G1/2) AC
1/4" NPT male AM
1/2" NPT male AN

Order Number Example L P10 03 –0 0 5 0 AC

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards.

34
 S.07 Hispec HI2000 Series
High Precision Pressure Transducer

ESI__S.1 HP

High accuracy and performance

Silicon-on-Sapphire sensor technology for outstanding

stability

Pressure ranges to 1,500 bar

Titanium wetted parts for excellent chemical

compatibility

High thermal stability over wide operating temperature

ATEX/IECEx option available

(includes M1 for mining applications)

TEDS version on request

35
 S.07

DESCRIPTION
The HISPEC HI2000 series of pressure transducers, with Silicon-on-Sapphire sensor
technology, offer high levels of accuracy and performance

The unique Silicon-on-Sapphire sensor provides outstanding stability and accuracy over a wide tempe-
rature range. The wetted parts and diaphragm are machined from a single piece of titanium alloy which
provides excellent chemical compatibility. Applications include aerospace, laboratory and test, oil and
gas monitoring equipment (down-hole) and subsea. Available in pressure ranges from
0-500 mbar to 0-1,500 bar and with electrical outputs of 10 mV/V, 0-5 V and
0-10 V.

An optional ATEX and IECEx approved version of this product with mV/V output is available for explosi-
on protection for flammable gases (zone 0), dusts (zone 20) and mining areas (group I M1).

A TEDS (Transducer Electronic Data Sheet) version is available. A TEDS contains the critical information
needed by an instrument or measurement system to identify, characterize, interface, and properly use
the signal from an analog sensor. IEEE 1451.4 defines the method of encoding TEDS information for a
broad range of senor types and applications.

DIMENSIONS (in mm) ELECTRICAL CONNECTION

MIL-C-26482

Pin. Designation
A +supply
12 MAX B +output
C -output
D -supply
E N/C
F N/C

ELECTRICAL CONNECTION
CABLE OUTLET
Ø25.4
WIRE COLOUR Designation
A
RED +supply
GREEN +output
YELLOW -output
BLUE -supply

19 A/F Dim. A
HEX
HI2000 80
12 HI2001/2 95
HI2010 80
HI2011/12 95

¼”BSP male (G1/4) OR 1/4" NPT

36
 Hispec HI2000 Series
High Precision Pressure Transducer

TECHNICAL DATA

Type: HI2000/HI2010 HI2xx1/ HI2xx4 HI2xx2/ HI2xx5

Sensor Technology: Silicon-on-Sapphire (SoS)
Output signal: 10 mV/V (4 wire) 0 - 5V (4 or 3 wire) 0 - 10V (4 or 3 wire)
Supply Voltage: 10 VDC (5-15V) 13-30 VDC 13-30 VDC
Pressure Reference: Gauge
Protection of Supply
n/a Protected against supply voltage reversal up to 50 V (amplified versions)
Voltage:
Standard Pressure 0-1 bar Vac; 0-1 bar; 0-10 bar; 0-25 bar; 0-100 bar; 0-250 bar; 0-400 bar; 0-600 bar; 0-1,000 bar; 0-1,500 bar
Ranges (bar): (other ranges available)
Standard Pressure 0-30 in Hg; 0-15 psi; 0-150 psi; 0-300 psi; 0-1,500 psi; 0-3,000 psi; 0-6,000 psi; 0-10,000 psi; 0-15,000 psi; 0-20,000
Ranges (psi): psi (other ranges available)
Overpressure Safety: 4x for 0.5 bar range; 2 x for ranges 1 bar to 600 bar; 1.5x for 1,000 bar range; 1.1x for 1,500 bar range

Load Driving Capability: 10 mV/V: n/a; 0-5 V: max. load RL > 5 KΩ; 0-10 V: max. load RL > 10 KΩ

Accuracy NLHR: ≤ ±0.1 % of span BFSL

Zero Offset and Span
±0.5% FS at room temperature (HI2000/HI2010: ±1 mV)
Tolerance:
Operating Ambient
-40 °C to +85 °C (-40 °F to +185 °F)
Temperature:
Operating Media
-50 °C to +125 °C (-58 °F to +257 °F)
Temperature:
Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice

Temperature Effects: ±1.0 %FS total error band for -20 °C to +70 °C. Typical thermal zero and span coefficients ±0.005 %FS/ °C
Ex II 1 G Ex ia IIC T4 Ga (zone 0)
ATEX/IECEx Approval
Ex II 1 D Ex ia IIIC T135 °C Da (zone 20) n/a n/a
Option (mV version only):
Ex I M 1 Ex ia I Ma (group 1 M1)

Ui = 28 V; Ii = 119 mA
Pi = 0.65 W ; Li = 0.1 µH
ATEX/IECEx Safety Values: Ci = 0; n/a n/a
Temperature Range = -20 °C to +70 °C
Max. cable length = 50 m

TEDS: IEEE 1451.4 Sensor TEDS (contact sales for more information)

Emissions: EN61000-6-4
Electromagnetic Capability: Immunity: EN61000-6-2
Certification: CE Marked
Insulation Resistance: > 100 MΩ @ 50 VDC
Response time 10-90 %: 1 mS
Wetted Parts: Titanium alloy
Pressure Media: All fluids compatible with Titanium alloy
Pressure Connection: 1/4“ BSP male (G1/4) or 1/4“ NPT male (others options available)
HI200x: PTFE insulated flying lead, conductor size 7/0.1 mm. HI201x: MIL-C-26482 6 pin bayonet connector
Electrical Connection:
(Accessory not included: mating connector type MS3116F10-6S).

37
 S.07
Hispec

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
10 mV/V 4 HI2000
4 HI2001
0-5 V Cable outlet 1m
3 HI2004
PTFE
4 HI2002
0-10 V
3 HI2005
10 mV/V 4 HI2010
4 HI2011
0-5 V MIL-C-26482
3 HI2014
6 pin bayonet
4 HI2012
0-10 V
3 HI2015

Electrical Connection / Option

No special option required –
ATEX/ IECEx certified (HI2000 & HI2010 only) EX

Pressure Range in bar

0-1 barVac V001
0-1 bar 0001
0-10 bar 0010 HI2000
0-25 bar 0025
0-100 bar 0100
0-250 bar 0250
0-400 bar 0400
0-600 bar 0600
0-1,000 bar 1000
0-1,500 bar 1500

Process Connection
1/4“ BSP male (G1/4) AB
1/4" NPT male AM

Order Number Example H I2 0 0 0 E X0 0 2 0 A B

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards.
HI2010 38
 S.08 Protran PR3900
and Protran PR3110EX
Intrinsically Safe Pressure Transmitter

ESI__S.1 HP

ATEX and IECEx certified

Designed for operation in zone 0, zone 20 and M1 mining

Wide choice of low and high pressure ranges

NACE corrosion resistant materials

Rugged, weatherproof design option

DNV GL certification available

39
 S.08

DESCRIPTION
Our PR3900 and PR3110EX are made exclusively for hazardous areas intended for installation and operation in
zone 0, gas group IIC, temperature class T4 and zone 20 dust and M1 mining. Both have ATEX and IECEx appro-
val and protection is by intrinsic safety when used with a safety or isolation barrier.
The PR3900 provides a stable and accurate intrinsically safe two wire output signal of 4-20mA. Pressure ranges available from 0-10 bar to
0-1,500 bar. The unique Silicon-on-Sapphire sensor provides outstanding performance, stability and accuracy over a wide temperature
range and provides excellent chemical compatibility. Electrical connection is via a strong and durable polyurethane cable with integral
vent tube for effective gauge venting to atmosphere. Various process connections are available. Applications include any above ground
explosive / hazardous environment installations, oil and gas industries and volatile chemical processing and storage.

The PR3110EX pressure transmitter is designed to meet the requirements of the majority of hazardous applications where accurate low
pressure measurement is required. Robustly constructed from stainless steel this range of pressure transmitters incorporates the latest sili-
con strain gauge technology together with a custom IC amplifier offering excellent stability and accuracy over a long service life. Electrical
connection is via a detachable DIN connector allowing easy access to zero and span adjustment. Standard pressure connection is 1/2” BSP,
but other options are available. Pressure ranges are available from 0-100 mbar to 0-900 mbar. Suitable for use with low pressure fluid and
gas applications. DNV GL rules for classification of ships, high speed & light craft and DNV GL offshore standards.

DIMENSIONS (in mm) DIMENSIONS (in mm)

~35

PG9

1/2"NPT

~111
~132
Ø30

27A/F
15 HEX
20 1/2"
7/8" A/F BSP
HEX

Model shown PR3900 Model shown PR3110EX

40
 Protran PR3900
Hazardous Area Pressure Transmitter

TECHNICAL DATA

Type: PR3900

Sensor Technology: Silicon-on-Sapphire (SoS)

Output signal: 4 - 20 mA (2 wire)

Supply Voltage: 10 - 36 VDC

Pressure Reference: Gauge

Protection of Supply
Protected against supply voltage reversal up to 50 V
Voltage:

Standard Pressure
0-10 bar; 0-25 bar; 0-60 bar; 0-100 bar; 0-250 bar; 0-600 bar; 0-1,000 bar; 0-1,500 bar (other options available)
Ranges (bar):
Standard Pressure
0-150 psi; 0-300 psi; 0-1,000 psi; 0-1,500 psi; 0-3,000 psi; 0-8,700 psi; 0-15,000 psi; 0-20,000 psi (other options available)
Ranges (psi):

Overpressure Safety: 2x for ranges up to 600 bar; 1.5x for 1000 bar; 1.1x for 1,500 bar

4 - 20 mA: RL < [UB - 10 V] / 20 mA

Load Driving Capability:
(e.g. with supply voltage (UB) of 36V, max. load (RL) is 1300 Ω)

Accuracy NLHR: ≤ ±0.3 % of span BFSL (optional higher accuracy version of ≤ ±0.15 % of span BFSL)

Zero Offset and

±0.5 %FS at room temperature
Span Tolerance:

Operating Ambient
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:

Operating Media
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:

Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice

Temperature Effects: ±1.5 %FS total error band for -20 °C to +70 °C. Typical thermal zero and span coefficients ±0.015 %FS/ °C

Ex II 1 G Ex ia IIC T4 Ga (zone 0)
ATEX/IECEx Approval: Ex II 1 D Ex ia IIIC T135 °C Da (zone 20)
Ex I M 1 Ex ia I Ma (group 1 M1)
Ui = 28 V Ii = 119 mA Pi = 0.65 W
Li = 0.1 µH Ci = 74 nF
ATEX/IECEx Safety Values:
Temperature Range = -20 °C to +70 °C
Max. cable length = 45 m

DNV GL Approval Class: Temperature: D; Humidity: B; Vibration: B; EMC: B; Enclosure: C (contact sales for more information)
Ingress Protection: Fully welded housing. Rated IP67 when correctly installed to conduit connection.

Electromagnetic
Emissions: EN61000-6-4; Immunity: EN61000-6-2; Certification: CE Marked
Compatibility:

Insulation Resistance: > 100 MΩ @ 50 VDC

Response time 10-90 %: 1 mS

Wetted Parts: SAE 316 stainless steel with titanium alloy measurement cell

Pressure Media: All fluids compatible with SAE 316 stainless steel and titanium alloy

Pressure Connection: 1/4“ NPT female standard (other options available)

Electrical Connection: 1m polyurethane cable with integral screen, Kevlar strain cord and vent tube. Conductor size 7/0.20 mm (24 AWG)
41
 S.08
Protran

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
4-20 mA 2 PR3900

Electrical Connection / Option

1m submersible polyurethane cable
–
with integral screen

Pressure Range in bar

0-10 bar 0010
0-25 bar 0025
0-60 bar 0060
0-100 bar 0100
0-250 bar 0250
0-600 bar 0600
0-1,000 bar 1000
0-1,500 bar 1500

Process Connection
1/4“ NPT female AS
1/4" BSP male (G1/4) AB
1/4" NPT male AM
1/2“ BSP male (G1/2) AC
1/2" NPT male AN

Order Number Example PR3900–1000AS

For options not listed please contact sales team.

PR3900

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards.
42
 Protran PR3110EX
Intrinsically Safe Pressure Transmitter

TECHNICAL DATA

Type: PR3110E X

Sensor Technology: Isolated Piezoresistive Silicon

Output signal: 4 - 20 mA (2 wire)
Supply Voltage: 13 - 36 VDC
Pressure Reference: Gauge or Absolute ranges from 500mbar
Protection of Supply
Protected against supply voltage reversal up to 50 V
Voltage:
Standard Pressure 0-100 mbar, 0-200 mbar, 0 -250 mbar; 0-300 mbar; 0- 400 mbar, 0-500 mbar, 0-600 mbar,
Ranges (bar): 0-750 mbar, 0-900 mbar (other ranges available)
Standard Pressure
0-1.5 psi; 0-3 psi; 0-4 psi: 0-7.5 psi; 0-15 psi (other ranges available)
Ranges (psi):
Overpressure Safety: 6x for 100 mbar range; 3x for ranges 200 mbar to 900 mbar
4 - 20 mA: RL < [UB - 13 V] / 20 mA
Load Driving Capability:
(e.g. with supply voltage (UB) of 36V, max. load (RL) is 1150Ω)
Accuracy NLHR: ≤ ±0.3 % of span BFSL
Zero Offset and
±0.5%FS at room temperature; ±5 %FS (approx.) adjustment with easy access trimming potentiometers
Span Tolerance:
Operating Ambient
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:
Operating Media
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:
Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice

Temperature Effects: ±2 %FS total error band for -20 °C to +70 °C. Typical thermal zero and span coefficients ±0.03 %FS/ °C

ATEX/IECEx Approval Ex II 1 G Ex ia IIC T4 Ga (zone 0)

Option (4-20mA version Ex II 1 D Ex ia IIIC T135 °C Da (zone 20)
only): Ex I M 1 Ex ia I Ma (group 1 M1)
Ui = 28 V Ii = 119 mA Pi = 0.65W Li = 0.1 µH Ci = 74 nF
ATEX/IECEx Safety
Temperature Range = -20 °C to +70 °C
Values:
Max. cable length = 45 m
DNV GL Approval Class: Temperature: D; Humidity: B; Vibration: B; EMC: B; Enclosure: C (contact sales for more information)
Electromagnetic
Emissions: EN61000-6-4; Immunity: EN61000-6-2; Certification: CE Marked
Capability:
Insulation Resistance: > 100 MΩ @ 50 VDC
Response time 10-90 %: 1 mS
Wetted Parts: SAE 316 stainless steel and nitrile (NBR) seal

Pressure Media: All fluids compatible with SAE 316 stainless steel and nitrile (NBR).

Pressure Connection: 1/4“ BSP male (G1/4); 1/4“ NPT male; 1/4“ BSP male (G1/2); 1/2“ NPT male (other options available)

Electrical Connection: Mating socket EN175301-803 Form A (ex DIN43650) rated IP65 with PG9 cable entry (other options available)

43
 S.08
Protran

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
4-20 mA, ATEX/ IECEx certified 2 PR3110EX

Electrical Connection / Option

ATEX/ IECEx certified with DIN EN175301
EX
plug and socket

Pressure Range in bar

0-100 mbar 00.1
0-200 mbar 00.2
0-250 mbar 0.25
0-300 mbar 00.3
0-400 mbar 00.4
0-500 mbar 00.5
0- 500 bar Absolute 0.5A
0-600 mbar 00.6
0-750 mbar 0.75
0-900 mbar 00.9
0- 900 mbar Absolute 0.9A
PR3110EX
Process Connection
1/4“ BSP male (G1/4) AB
1/4" NPT male AM
1/2" BSP male (G1/2) AC
1/2" NPT male AN

Order Number Example PR3110EX0.9AAC

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards.

44
 S.09 Hispec HI2200/2300 Series
and Protran PR3860
High Temperature Transmitter

ESI__S.1 HP

High operating temperatures of up to 250 ºC

High ambient temperatures of up to 200 ºC

Pressure ranges to 1,500 bar

Temperature compensated option

Good chemical compatibility for a range of applications

ATEX/IECEx option available

(includes M1 for mining applications)

45
 S.09

DESCRIPTION
Our high temperature pressure transducers and transmitters are designed to ope-
rate at constant media and ambient temperatures of up to 250 ºC, at pressure
ranges of up to 1,500 bar.

The HI2200/HI2300 model takes advantage of the advanced Silicon-on-Sapphire sensors’ outstanding
insulation properties which allows the sensor to operate over a very wide temperature range without
loss of performance. The HI2200/ HI2300 offers compensated and un-compensated output options and
not only does it perform effectively at high media temperatures, but can also be used in environments
where there are elevated ambient temperatures of up to 200 °C- Inside a furnace or thermal chamber
for example.

The PR3860 high temperature pressure transmitter has been designed to meet the requirements of the
majority of industrial pressure measurement applications where a hygienic flush diaphragm connection
is required. Robustly constructed from stainless steel, the PR3860 pressure transmitter permits accura-
te pressure measurement at elevated temperatures up to 250 ºC. The flush membrane can be easily
cleaned for long term reliability and performance. An optional weldable boss is available to ensure
flush-face installation of the transmitter to tanks and pipe-work. An optional ATEX and IECEx approved
version is available.

DIMENSIONS (in mm) DIMENSIONS (in mm)

~35

15

Ø25.4

~210
~68

19 A/F
HEX

12 1/2"
BSP

27A/F HEX
Model shown HI2200 Model shown PR3860
46
 Hispec HI2200/2300 Series
High Temperature Transmitter

TECHNICAL DATA

Type: HI2200/HI2210 HI2300/HI2310

Sensor Technology: Silicon-on-Sapphire (SoS)

10-20 mV/V 10 mV/V

Output signal:
(Un-rationalised and un-compensated) (Rationalised and compensated)

Supply Voltage: 10 VDC (5-15 V)

Pressure Reference: Gauge

Standard Pressure
0-1 bar Vac; 0-1 bar; 0-10 bar; 0-25 bar; 0-100 bar; 0-250 bar; 0-700 bar; 0-1,500 bar (other ranges available)
Ranges (bar):

Standard Pressure 0-30 in Hg; 0-15 psi; 0-150 psi; 0-300 psi; 0-1,500 psi; 0-3,000 psi; 0-10,000 psi; 0-20,000 psi
Ranges (psi): (other ranges available)

Overpressure Safety: 2x for ranges 1 bar Vac to 600 bar; 1.5x for 1,000 bar range; 1.1x for 1,500 bar range

Load Driving Capability: n/a

Accuracy NLHR: ≤ ±0.1 % of span BFSL

Zero Offset and Span Zero offset: ±1 mV/V Zero offset: ±1 mV

Tolerance: Span Tolerance: 10-20 mV/V Span Tolerance: ±1% FS

Operating Ambient
-40 °C to +200 °C (-40 °F to +392 °F)
Temperature:
Operating Media
-50 °C to +200 °C (-58 °F to +392 °F)
Temperature:

Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice

Typical thermal zero and span coefficients ±2.0% FS Total error band -40°C to +150°C, typical ther-
Temperature Effects:
compensated ±0.05% FS/ °C mal zero and span coefficients ±0.005% FS/ °C

Electromagnetic
Emissions: EN61000-6-4; Immunity: EN61000-6-2; Certification: CE Marked
Capability:

Insulation Resistance: > 100 MΩ @ 50 VDC

Response time 10-90 %: 1 mS

Wetted Parts: Titanium alloy

Pressure Media: All fluids compatible with Titanium alloy

Pressure Connection: 1/4“ BSP male (G1/4) or 1/4“ NPT male (others options available)

HI2x00: PTFE insulated flying lead, conductor size 7/0.1 mm.

Electrical Connection: HI2x10: MIL-C-26482 6 pin bayonet connector
(Accessory not included: mating connector type MS3116F10-6S).

47
 S.09
Hispec
Protran

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
1m PTFE
insulated flying 4 HI2200
10-20 mV/V lead
MIL-C-26482 6 pin
4 HI2210
bayonet
1m PTFE
insulated flying 4 HI2300
10 mV/V lead
MIL-C-26482 6 pin
4 HI2310
bayonet

Electrical Connection / Option

1m PTFE insulated flying lead (HI2200, HI2300) –
MIL-C-26482 6 pin bayonet (HI2210, HI2310) –

Pressure Range in bar

0-1 barVac V001
0-1 bar 0001
0-10 bar 0010
0-25 bar 0025
0-100 bar 0100
0-250 bar 0250
0-700 bar 0700 HI2200
0-1,500 bar 1500

Process Connection
1/4“ BSP male (G1/4) AB
1/4" NPT male AM

Order Number Example H I2 2 0 0 –0 4 0 0 A B

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards.

48
 Protran PR3860
High Temperature Transmitter

TECHNICAL DATA

Type: PR3860 PR3861 PR3862

Sensor Technology: Bonded Foil Strain Gauge

Output signal: 4 - 20 mA (2 wire) 0 - 5 V (4 wire) 0 - 10 V (4 wire)

Supply Voltage: 13 - 36 VDC 13 - 30 VDC 13 - 30 VDC

Pressure Reference: Gauge

Protection of Supply Protected against supply voltage reversal up to 50 V

Voltage:

Standard Pressure 0-10 bar; 0-25 bar; 0-60 bar; 0-100 bar; 0-250 bar; 0-400 bar (other options available)
Ranges (bar):
Standard Pressure
Ranges (psi): 0-150 psi; 0-300 psi; 0-1,500 psi; 0-3,000 psi; 0-6,000 psi (other options available)

Overpressure Safety: 1.5x all ranges

4 - 20 mA: RL < [UB - 13 V] / 20 mA

(e.g. with supply voltage (UB) of 36V, max. load (RL) is 1150 Ω)
Load Driving Capability: 0 - 5 V: max load RL > 5 KΩ
0 - 10 V: max load RL > 10 KΩ

Accuracy NLHR: ≤ ±0.3 % of span BFSL

Zero Offset and ±1.0 %FS at room temperature; ±5 %FS (approx.) adjustment with easy access trimming
Span Tolerance: potentiometers on amplified versions only

Operating Ambient -20 °C to +85 °C (-4 °F to +185 °F)

Temperature:

Operating Media ‚0 °C to +205 °C (+32 °F to 185°F) with standard o-ring ; 0 °C to +250 °C (+32 °F to +482 °F) with optional o-ring
Temperature: (sensor and electronics thermally insulated from media temperature)

Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice

Temperature Effects: ±2.5% FS total error band for -20 °C to +70 °C. Typical thermal zero and span coefficients ±0.04 %FS/ °C

Ex II 1 G Ex ia IIC T4 Ga (zone 0)
ATEX/IECEx Approval Ex II 1 D Ex ia IIIC T135 °C Da (zone 20) n/a n/a
(4-20mA version only): Ex I M 1 Ex ia I Ma (group 1 M1)
Ui = 28 V
Ii = 119 mA
Pi = 0.65 W
ATEX/IECEx Safety Values: Li = 0.1 µH n/a n/a
Ci = 62 nF
Temperature Range = -20 °C to +70 °C
Max. cable length = 105 m
Electromagnetic Compati- Emissions: EN61000-6-4; Immunity: EN61000-6-2; Certification: CE Marked
bility:
Insulation Resistance: > 100 MΩ @ 50 VDC

Wetted Parts: SAE 316L stainless steel

Pressure Media: All fluids compatible with SAE 316L stainless steel
1/2“ BSP male (G1/2) with standard integral viton (FKM) o-ring seal and flush SAE 316L stainless steel diaphragm.
Pressure Connection: O-ring seal is for service temperature up to max. 205 °C. An alternative o-ring material can be provided for service up
to 250 °C (charged accessory)

Mating socket EN175301-803 Form A (ex DIN43650) rated IP65 with PG9 cable entry
Electrical Connection:
(other options available)

49
 S.09
Hispec
Protran

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
4-20 mA 2 PR3860
0-5 V 4 PR3861
0-10 V 4 PR3862

Electrical Connection / Option

DIN EN175301 plug and socket –
Cable outlet 1m screened A
M12 connector B
Cable outlet 1m screened IP67 protection C
ATEX/ IECEx certified with DIN EN175301 plug
EX
and socket

Pressure Range in bar

0-10 bar 0010
0-25 bar 0025
0-60 bar 0060
0-100 bar 0100
0-250 bar 0250
0-400 bar 0400

Process Connection
1/2“ BSP flush diaphragm male BA
(* Optional 250ºC rated o-ring available on request.)

Order Number Example PR 3 8 6 0 –0 4 0 0 B A

For options not listed please contact sales team.

PR3860

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards.

50
 S.10 Protran PR3441/PR3420/PR3442
Submersible Depth/Level Pressure Transmitter

ESI__S.1 HP

Piezoresistive sensor technology for excellent stability

and repeatability

Robust stainless steel construction

Pressure ranges available from 1 mWG

High strength, moulded cable for protection

against ingress

Ultra slim option for borehole applications

Sludge Platform option to raise sensor

above sediment level

ATEX/IECEx option available

(includes M1 for mining applications)

DNV GL certification available

51
 S.10

DESCRIPTION
The submersible range of pressure transmitters has been designed for the accura-
te measurement of the depth and level of liquids in many applications. Standard
output signal is 4-20 mA, and electrical connection is via a high strength moulded
cable with integral tube for trouble-free venting to the surface atmosphere.

The PR3441 transmitter has a 25 mm diameter, suitable for depth and level measurement in boreholes,
while the PR3442 model has a slim-line 16mm diameter suitable for boreholes from 19 mm wide. Appli-
cations include borehole level and reservoir level monitoring, water mains pressure, power level and
outlet pressure measurement on submersible pumps.

The PR3420 submersible depth and level transmitter has been designed for accurate level measurement
where sediment is present. The integral sludge platform ensures that the sensing element is elevated
above the sediment level.

An optional ATEX and IECEx approved version of this product is available for explosion protection for
flammable gases (zone 0), dusts (zone 20) and mining areas (group I M1).

DNV GL rules for classification of ships, high speed & light craft and DNV GL offshore standards (PR3441
only).

DIMENSIONS (in mm)

~195
ELECTRICAL CONNECTION

Red + supply
Blue 4-20 mA signal
Screen to case

~25

Model shown PR3441

52
 Protran PR3441/PR3420/PR3442
Submersible Depth/Level Pressure Transmitter

TECHNICAL DATA

Type: PR3441 PR3420 PR3442

Sensor Technology: Isolated Piezoresistive Silicon

Output signal: 4-20 mA (2 wire) Other options on request 4-20 mA (2 wire)
Supply Voltage: 13 -36 VDC 13 -36 VDC 13 -36 VDC
Pressure Reference: Vented Gauge
Protection of Supply Voltage: Protected against supply voltage reversal up to 50 V
Lightening Protection: On Request
0 - 30 mWG; 0 - 50 mWG; 0 - 80
Standard Pressure 0-1 mWG; 0-10 mWG; 0-20 mWG; 0-50 mWG; 0-100 mWG; 0-250 mWG; 0 - 100 mWG; 0 - 150 mWG;
Ranges (mWG): mWG; 0-500 mWG (other options available) 0 - 250 mWG; 0 - 500 mWG
(other options available)
0-50 psi; 0-75 psi; 0-100 psi; 0-150 psi;
Standard Pressure 0-3 psi; 0-5 psi; 0-7.5 psi; 0-10 psi; 0-15 psi; 0-30 psi; 0-50 psi; 0-100
0-200 psi; 0-300 psi; 0-750 psi (other
Ranges (psi): psi; 0-200 psi; 0-300 psi (other options available)
options available)
Overpressure Safety: 2x all ranges
4 - 20 mA: RL < [UB - 13 V] / 20 mA; (e.g. with supply voltage (UB) of 36V, 4-20 mA: RL < [UB - 13 V] / 20 mA (e.g.
Load Driving Capability: max. load (RL) is 1150 Ω; 10 mV/V: n/a; 0 - 5 V: max. load RL > 5 KΩ; 0 - 10 V: with supply voltage (UB) of 36V, max. load
max. load RL > 10 KΩ (RL) is 1150 Ω)

Accuracy NLHR: ≤ ±0.3 % of span BFSL

Zero Offset and
±0.5% FS at room temperature
Span Tolerance:
Operating Ambient
-20 °C - +60 °C (-4 °F to +140 °F)
Temperature:
Operating Media
Media must not freeze around the sensor
Temperature:
Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice
Temperature Effects: ±2.0% FS total error band for -20 °C - +60 °C. Typical thermal zero and span coefficients +/0.03%FS/°C
ATEX/IECEx Approval Option: Ex II 1 G Ex ia IIC T4 Ga (zone 0) Ex II 1 D Ex ia IIIC T135°C Da (zone 20) Ex I M 1 Ex ia I Ma (group 1 M1)
Ui = 28 V
Ii = 119 mA
ATEX/IECEx Safety Pi = 0.65 W
Values: Li = 0.1 µH
Temperature Range = -20 °C to +70 °C
Max. cable length = 105 m

DNV GL Approval Class Temperature: D; Humidity: B; Vibration:

B; EMC: B; Enclosure: D (contact sales for
(PR3441 only): more information)

Electromagnetic
Emissions: EN61000-6-4; Immunity: EN61000-6-2; Certification: CE Marked
Compatibility:
Insulation Resistance: > 100 MΩ @ 50 VDC
S AE 316L stainless steel housing and 303 or 316L stainless steel housing and SAE 316L stainless steel housing & diaphragm
Wetted Parts: diaphragm, polyurethane cable and nitrile diaphragm, polyurethane cable and and polyurethane cable
(NBR) o-ring seal nitrile (NBR) o-ring seal

All fluids compatible with SAE 316L stain- All fluids compatible with 303/316L All fluids compatible with SAE 316L stainless
Pressure Media: less steel, polyurethane and nitrile (NBR) stainless steel and Nitrile steel and polyurethane

tainless steel nose cone with radial pres- Stainless steel nose cone with radial pressure
Pressure Connection: sure inlets or 1/4" BSP male (G1/4) Sludge Platform inlets

Submersible black polyurethane cable moulded to housing. With integral screen, Kevlar strain cord and vent
Electrical Connection:
53 tube. Conductor size 7/0.20 mm (24 AWG), resistance 8.9 Ω / 100 m (x2)
 S.10
Protran

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
With sludge
2 PR3420
platform
4-20 mA
25mm diameter 2 PR3441
16mm diameterr 2 PR3442

Electrical Connection / Option

No special option required –
ATEX/ IECEx certified (PR3420 and PR3441 only) EX

Pressure Range in mWG (Metres Water Gauge)

0-1 mWG (PR3420 and PR3441 only) 0001
0-5 mWG (PR3420 and PR3441 only) 0005
0-10 mWG (PR3420 and PR3441 only) 0010
PR3441
0-50 mWG 0050
0-100 mWG 0100
0-250 mWG 0250
0-500 mWG 0500

Process Connection
Protective nose cone (PR3441 and PR3442 only) AX
1/4" BSP (PR3441 only) AB
Sludge platform AY

Cable
Cable length is specified by adding a 3 digit numeric code as a suffix to the part number.
Example -010 = 10 metres.
Max cable lenght 500 meters

Order Number Example PR3441–0010AX-010

PR3420
For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards. PR3442 54
 S.11 Protran PR3800/PR3820/
PR3850/PR3860
Flush Diaphragm Pressure Transmitter

ESI__S.1 HP

Easy clean flush membrane to prevent clogging

Thick film sensor technology for long service life

Pressure ranges to 400 bar

Range of sanitary grade pressure fittings

Up to 250 ºC media temperature option

Models available with integral O-ring seal option to

ensure flush pressure seal

ATEX/IECEx option available

(includes M1 for mining applications)

55
 S.11

DESCRIPTION
The range of flush diaphragm pressure transmitters have been designed to meet the requirements of the
majority of industrial pressure measurement applications where a hygienic flush diaphragm or remote barrier
seal connection is required.
Robustly constructed from stainless steel, this range of pressure transmitters incorporates the latest strain gauge technology together with
a custom IC amplifier offering excellent stability and accuracy over a long service life. The range offers a stable and accurate output signal
of 4-20 mA with options for 0-5 V and 0-10 V.

Typical applications include food processing, pharmaceutical, petrochemical, waste water and slurry handling. In these installations the
process media may corrode the sensing diaphragm or clog the narrow pressure inlet on a standard transmitter. The flush membrane can
be easily cleaned for long term reliability and outstanding performance.

For hygienic applications the PR3800 and PR3850 series provides a sanitary grade pressure fitting. Seals are available in a variety of forms
and materials for a wide range of applications and can be directly attached to the proposed connection or remotely via stainless steel
capillary.

For food processing, pharmaceutical and petrochemical applications the PR3860 is suitable for use at media temperature up to 250 ºC.
Pressure ranges available from 0-200 mbar to 0-400 bar.

An optional ATEX and IECEx approved versions of this range are available for explosion protection for flammable gases (zone 0), dusts (zone
20) and mining areas (group I M1).

DIMENSIONS (in mm)

~35

PG9

~131
ELECTRICAL CONNECTION (mA)

Pin. No. 2 wire

1 + supply
2 4-20 mA signal
3 N/C
to case

1/2" BSP ELECTRICAL CONNECTION (V)

19
Pin. No. 4 wire 3 wire
1 - supply common
2 + supply + supply
27 A/F HEX 3 + output + output
Model shown PR3850 - output to case
56
 Protran PR3800/PR3820
Flush Diaphragm Pressure Transmitter

TECHNICAL DATA

Type: PR3800 PR3801 PR3802 PR3820 PR3821 PR3822

Sensor Technology: Ceramic Thick Film or Isolated Piezoresistive Silicon
4-20 mA 0-5 V 0-10 V 4-20 mA 0-5 V 0-10 V
Output signal:
(2 wire) (4 wire) (4 wire) (2 wire) (4 wire) (4 wire)
Supply Voltage: 13 to 36 VDC 13-30 VDC 13-30 VDC 13 to 36 VDC 13-30 VDC 13-30 VDC
Pressure Reference: Gauge
Protection of Supply
Protected against supply voltage reversal up to 50 V
Voltage:
Standard Pressure 0-1 bar Vac; 0-200mbar, 0-1 bar; 0-2.5 bar; 0-6 bar; 0-10 bar; 0-16 bar; 0-25 bar; 0-40 bar
Ranges (bar): (other options available)
Standard Pressure 0-30 in Hg; 0-1.5psi; 0-15 psi; 0-30 psi; 0-100psi; 0-150 psi; 0-200 psi; 0-300 psi; 0-600 psi
Ranges (psi): (other options available)
Overpressure Safety: 1.5x for all ranges

Load Driving Capability: 4-20 mA: RL < [UB - 13 V] / 20 mA (e.g. with supply voltage (UB) of 36V, max. load (RL) is 1150 Ω)

Accuracy NLHR: ≤ ±0.3 % of span BFSL

Zero Offset and Span ±1.0% FS at room temperature; ±5% FS (approx.) adjustment with easy access
Tolerance: trimming potentiometers on amplified versions only
Operating Ambient
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:
Operating Media
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:
Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice
Temperature Effects: ±2.5% FS total error band for -20°C - +70°C. Typical thermal zero and span coefficients ±0.04% FS/ °C
ATEX/IECEx Approval Ex II 1 G Ex ia IIC T4 Ga (zone 0)
Option (4-20mA version Ex II 1 D Ex ia IIIC T135°C Da (zone 20)
only): Ex I M 1 Ex ia I Ma (group 1 M1)
ATEX/IECEx Safety Ui = 28 V, Ii = 119 mA, Pi = 0.65 W, Li = 0.1 µH, Ci = 62 nF, Temperature Range = -20°C - +70°C, Max.
Values: cable length = 105 m
Emissions: EN61000-6-4
Electromagnetic
Immunity: EN61000-6-2
Capability:
Certification: CE Marked
Insulation Resistance: > 100 MΩ @ 50 VDC
Response time 10-90 %: Ranges < 6 bar 1mS; Ranges ≥ 6 bar 10 mS
Wetted Parts: Ranges <6 bar: SAE 316 stainless steel and nitrile (NBR); Ranges ≥ 6 bar: SAE 316L stainless steel
Ranges <6 bar: all fluids compatible with SAE 316L stainless steel and nitrile (NBR);
Pressure Media:
Ranges ≥ 6 bar: all fluids compatible with SAE 316L stainless steel
Pipe clamp (Tri-clover) 1.5" 316L Stainless steel DIN 11851 female 316L Stainless steel
(Other options available) (Other options available)
Pressure Connection:
Ranges ≥0-6 bar; Flush diaphragm SAE 316L stainless steel hygienic diaphragm seal;
Ranges <6 bar: Semi-flush SAE 316L diaphragm seal
Mating socket EN175301-803 Form A (ex DIN43650) rated IP65 with PG9 cable entry
Electrical Connection:
57 (other options available)
 S.11
Protran

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
2 PR3800
4-20 mA
2 PR3820
4 PR3801
0-5 V
4 PR3821
4 PR3802
0-10 V
4 PR3822

Electrical Connection / Option

DIN EN175301 plug and socket –
Cable outlet 1m screened A
M12 connector B
Cable outlet 1m screened IP67 protection C
ATEX/ IECEx certified with DIN EN175301
EX
plug and socket

Pressure Range in bar

0-1 bar vac V001
0-1 bar 0001
0-2.5 bar 02.5
0-10 bar 0010
PR3800
0-16 bar 0016
0-25 bar 0025
0-40 bar 0040

Process Connection
Pipe clamp (Tri-clover) 1.5" 316L Stainless steel (PR3800 only) BG
Pipe clamp (Tri-clover) 2" 316L Stainless steel (PR3800 only) BH
RJT 38mm female 316L Stainless steel (PR3820 only) BJ
DIN11851 female 32mm Stainless steel (PR3820 only) BR
SMS 40mm female 316 Stainless steel (PR3820 only) BV

Order Number Example PR 3 8 0 0 –0 0 1 0 B G

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards. 58
 Protran PR3850/PR3860
Flush Diaphragm Pressure Transmitter

TECHNICAL DATA

Type: PR3850 PR3851 PR3852 PR3860 PR3861 PR3862

Sensor Technology: Ceramic Thick Film
4-20 mA 0-5 V 0-10 V 4-20 mA 0-5 V 0-10 V
Output signal:
(2 wire) (4 wire) (4 wire) (2 wire) (4 wire) (4 wire)
Supply Voltage: 13 to 36 VDC 13-30 VDC 13-30 VDC 13 to 36 VDC 13-30 VDC 13-30 VDC
Pressure Reference: Gauge
Protection of Supply
Protected against supply voltage reversal up to 50 V
Voltage:
Standard Pressure 0 - 4 bar; 0 - 10 bar; 0 - 25 bar; 0 - 100 bar; 0 - 250 0 - 10 bar; 0 - 25 bar; 0 - 60 bar; 0 - 100 bar; 0 - 250 bar; 0
Ranges (bar): bar; 0 - 400 bar (other options available) - 400 bar (other options available)
Standard Pressure 0-60 psi; 0-150 psi; 0-300 psi; 0-1,500 psi; 0-3,000 0-150 psi; 0-300 psi; 0-1,500 psi; 0-3,000 psi; 0-6,000 psi
Ranges (psi): psi; 0-6,000 psi (other options available) (other options available)
Overpressure Safety: 1.5x for all ranges

Load Driving Capability: 4-20 mA: RL < [UB - 13 V] / 20 mA (e.g. with supply voltage (UB) of 36V, max. load (RL) is 1150 Ω)

Accuracy NLHR: ≤ ±0.3 % of span BFSL

Zero Offset and Span ±1.0% FS at room temperature; ±5% FS (approx.) adjustment with easy access
Tolerance: trimming potentiometers on amplified versions only
Operating Ambient
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:
0 °C to +205 °C (+32 °F to 185°F) with standard o-ring ;
Operating Media 0 °C to +250 °C (+32 °F to +482 °F) with optional o-ring
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature: (sensor and electronics thermally insulated from media
temperature)
Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice
Temperature Effects: ±2.5% FS total error band for -20 °C - +70 °C. Typical thermal zero and span coefficients ±0.04% FS/ °C
ATEX/IECEx Approval Ex II 1 G Ex ia IIC T4 Ga (zone 0)
Option (4-20mA version Ex II 1 D Ex ia IIIC T135°C Da (zone 20)
only): Ex I M 1 Ex ia I Ma (group 1 M1)
ATEX/IECEx Safety Ui = 28 V, Ii = 119 mA, Pi = 0.65 W, Li = 0.1 µH, Ci = 62 nF, Temperature Range = -20°C - +70°C, Max.
Values: cable length = 105 m
Electromagnetic
Emissions: EN61000-6-4; Immunity: EN61000-6-2; Certification: CE Marked
Capability:
Insulation Resistance: > 100 MΩ @ 50 VDC
Response time 10-90 %: 10 mS
Wetted Parts: SAE 316L stainless steel
Pressure Media: All fluids compatible with SAE 316L stainless steel
1/2" BSP male (G1/2) with standard integral Viton o-ring seal and flush SAE 316L stainless steel
Pressure Connection:
diaphragm.
Mating socket EN175301-803 Form A (ex DIN43650) rated IP65 with PG9 cable entry
Electrical Connection:
(other options available)

59
 S.11
Protran

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
2 PR3850
4-20 mA
2 PR3860
4 PR3851
0-5 V
4 PR3861
4 PR3852
0-10 V
4 PR3862

Electrical Connection / Option

DIN EN175301 plug and socket –
Cable outlet 1m screened A
M12 connector B
Cable outlet 1m screened IP67 protection C
ATEX/ IECEx certified with DIN EN175301
EX
plug and socket

Pressure Range in bar

0-4 bar (PR385x only) 0004
0-10 bar 0010
0-25 bar 0025
0-100 bar 0100 PR3850
0-250 bar 0250
0-400 bar 0400

Process Connection
1/2" BSP male with flush membrane BA
1" BSP male with flush membrane (PR385x only) BC
* Optional 250ºC rated o-ring available on request (PR3860)

Order Number Example PR 3 8 6 0 –0 2 5 0 B A

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards.

PR3860 60
 S.12 Protran PR3200/PR3202
Differential Pressure Transmitter

ESI__S.1 HP

Wide range of pressure ranges from ultra-low

to 200 barDP

SoS Sensor Technology for higher pressures

WET/WET or DRY/DRY operation

Available for gauge reference or bi-directional

measurement

Durable designs for industrial and commercial

installations

R.F.I. shielded for protection against

electromagnetic radiation

ATEX/IECEx option available

(includes M1 for mining applications)

61
 S.12

DESCRIPTION
Differential pressure measurement has a wide number of applications from measuring a few millibar in clean-
rooms up hundreds of bar in subsea environments. ESI Technology has a range of differential pressure trans-
mitters with pressure ranges available from 0-5 mbar to 0-200 bar in DP, gauge reference or bi-directional.

The PR3200 differential pressure transmitter uses two titanium alloy Silicon-on-Sapphire pressure sensors, offering high stability and per-
formance with true wet/wet operation, suitable for use with all liquids and gases compatible with stainless steel and titanium. Applications
include flow measurement with orifice plates and mass flow meters, plus static differential pressure measurement and control in com-
bustion chambers, also condition monitoring and filter monitoring in high pressure hydraulic systems or any application on liquid or gas
requiring reliable differential pressure measurement.

The PR3202 air differential pressure transmitter provides an accurate solution for low pressure sensing, and is fully temperature compensa-
ted for unrivalled stability at very low pressures. Housed in an RFI shielded wall mountable box for EMC protection, the PR3202 combines
precise measurement with the robustness and flexibility for industrial and commercial installations. An optional heavy-duty aluminium
die-cast housing is available for the harshest environments.

Optional ATEX and IECEx approved versions are available for explosion protection for flammable gases (zone 0), dusts (zone 20) and mining
areas (group I M1).

DIMENSIONS (in mm)

1/4" BSP
FEMALE BOTH
SIDES (19mm
spanner flats)

120

ELECTRICAL CONNECTION (mA)

Pin. No. 2 wire

1 + supply
2 4-20 mA signal
3 N/C
to case
63.5
93.5

Model shown PR3200

62
 Protran PR3200/PR3202
Differential Pressure Transmitter

TECHNICAL DATA

Type: PR3200 PR3202 PR3203 PR3204

Sensor Technology: Silicon-on-Sapphire (SoS) Piezoresistive Silicon
Output signal: 4-20 mA (2 wire) 4-20 mA (2 wire) 0-5 V (3 wire) 0-10 V (3 wire)
Supply Voltage: 10-36 VDC 10-36 VDC 13-30 VDC 13-30 VDC
Pressure Reference: Differential
Protection of Supply Voltage: Protected against supply voltage reversal up to 50 V
Standard Pressure 0-0.5 bar; 0-1 bar; 0-10 bar; 0-20 0-5 mbar; 0-10 mbar; 0-20 mbar; 0-50 mbar; 0-100 mbar; 0-250 mbar; 0-500 mbar; 0-1,000 mbar
bar; 0-40 bar; 0-100 bar; 0-200 bar
Ranges (bar): (other options available) (other options available)

Standard Pressure 0-15 psi; 0-150 psi; 0-750 psi; 0-2 inH2O; 0-4 inH2O; 0-8 inH2O; 0-10 inH2O; 0-12 inH2O; 0-20 inH2O; 0-1 psi; 0-1.5 psi; 0-3 psi; 0-4
0-1,500 psi; 0-3,000 psi (other ran-
Ranges (psi): ges available) psi; 0-7.5 psi; 0-15 psi (other options avialable)

1.5x maximum static line pressure 25 mbar max. for ranges 0-5 mbar to 0-10 mbar; 200 mbar max. for ranges 0-20 mbar to 0-100
Overpressure Safety: for all ranges mbar; 1,200 mbar max. for ranges 0-150 mbar to 0-1,000 mbar
2.5 bar for 0-0.5 bar range; 4 bar for
0-1 bar range; 40 bar for 0-10 bar
Common Mode range; 60 bar for 0-20 bar range; 375 mbar equal to both ports for ranges 0-5 to 0-10 mbar; 2 bar max.
(Static line pressure) 160 bar for 0-40 bar range; 400 bar equal to both ports for ranges 0-20 mbar to 0-1,000 mbar
for 0-100 bar range; 600 bar for
0-200 bar range

4-20mA: RL < [UB - 10 V] / 20 mA

Load Driving Capability: (e.g. with supply voltage (UB) of 4-20 mA: RL < [UB - 13 V] / 20 mA (e.g. with supply voltage (UB) of 36 V, max. load (RL) is 1150 Ω)
36V, max. load (RL) is 1300 Ω)

≤ ±0.3 % of span BFSL (Optional

Accuracy NLHR: higher accuracy version of ≤ ±0.1 ≤ ±0.3 % of span BFSL
% of span BFSL available)

Zero Offset and Span Tolerance: ±1.0% FS at room temperature ±5% FS (approx.) adjustment with easy access trimming potentiometers

Operating Ambient -20 °C to +85 °C (-4 °F

-20 °C - +70 °C (-4 °F to +158 °F)
Temperature: to +185 °F)
Operating Media -20 °C to +85 °C (-4 °F
-20 °C - +70 °C (-4 °F to +158 °F)
Temperature: to +185 °F)
Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice
±3.0% FS total error band for -20 °C ±2.0% FS total error band for -20 °C - +70 °C. Typical thermal zero and span coefficients
Temperature Effects: - +70 °C. Typical thermal zero and
span coefficients ±0.05% FS/ °C ±0.04% FS/ °C
ATEX/IECEx Approval Ex II 1 G Ex ia IIC T4 Ga (zone 0) Ex II 1 D Ex ia IIIC T135°C Da (zone 20)
N/A
(4-20mA version only): Ex I M 1 Ex ia I Ma (group 1 M1)

ATEX/IECEx Safety Ui = 28 V Ii = 119 mA, Pi = 0.65 W Li = 0.1 µH, Ci = 74 nF

N/A
Values: Temperature Range = -20 °C - +70 °C Max. cable length = 45 m

Electromagnetic Capability: Emissions: EN61000-6-4; Immunity: EN61000-6-2; Certification: CE Marked

Insulation Resistance: > 100 MΩ @ 50 VDC
Response time 10-90 %: 1 mS
SAE 304 stainless steel and titanium
Wetted Parts: alloy Nickel plated brass, silicone tubing, silicon diaphragm, glass filled polyamide

All fluids compatible with SAE 304

Pressure Media: stainless steel and titanium alloy Non-corrosive, non-ionic fluids, such as air, dry gases

1/4"BSP female
Pressure Connection: (other options available) 4 mm I.D. hose (other options available)

Mating socket EN175301-803 Form Screw terminals for conductor sizes 0.2-2 mm2 are located beneath the enclosure lid.
63 Electrical Connection:
A (ex DIN43650), a screw terminal
Cable entry is via IP66 cable gland with compression seal for cable sizes 4-8 mm (optio-
connector rated IP65 with PG9 cab-
le entry (other options available) nal M20 conduit available)
 S.12
Protran

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
2 PR3200
4-20 mA
2 PR3202
0-5 V 3 PR3203
0-10 V 3 PR3204

Electrical Connection / Option

DIN EN175301 plug and socket (PR3200 only) –
PG7 cable gland (PR3202 only) –
ATEX/ IECEx certified EX

Pressure Range in bar

0-5 mbar (PR3202, PR3203, PR3204 only) 0005
0-50 mbar (PR3202, PR3203, PR3204 only) 0050
0-100 mbar (PR3202, PR3203, PR3204 only) 0100
0-500 mbar (PR3202, PR3203, PR3204) 0500 PR3200
0-500 mbar (PR3200) 00.5
0-1 bar 0001
0-10 bar (PR3200 only) 0010
0-50 bar (PR3200 only) 0050
0-100 bar (PR3200 only) 0100
0-200 bar (PR3200 only) 0200

Process Connection
1/4" BSP female (PR3200 only) AR
1/4" NPT female (PR3200 only) AS
4.8mm tube connection (push-on stem) (PR3202, PR3203, PR3204 only) AW
1/4" BSP male (PR3202, PR3203, PR3204 only) AB
PR3202

Order Number Example PR 32 0 0 E X0 2 0 0 A R

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve 64
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards.
 S.13 Genspec GS4000
and Protran PR3100
Standard Pressure Transmitter

ESI__S.1 HP

Suitable for the majority of industrial applications

Pressure ranges available from 0-500 mbar to 0-700 bar

Reliable pressure measurement

Long service life

Robust yet compact designs

ATEX/IECEx option available, including

M1 for mining applications (PR3100 only).

65
 S.13

DESCRIPTION
Our standard industrial pressure transmitters are designed to cover the majority of
industrial applications.

The Genspec GS4000 series is designed for applications where economical price and reliable pressure
measurement is required. Incorporating bonded thick film strain gauge technology with 17/4PH
stainless steel diaphragm for ranges above 20 bar, and a ceramic diaphragm for lower ranges, the
GS4000 series of transmitters and transducers offer a robust yet compact design ideal for use in OEM
applications.

The PR3100 series is robustly constructed from stainless steel incorporating thick film, ceramic and
bonded strain gauge technology offering excellent stability and accuracy over a long service life.
PR3100 is available in corrosion resistant materials on request. Pressure ranges are available from 0-1
bar to 0-600 bar. An optional ATEX and IECEx approved versions of the PR3100 is available for explosion
protection for flammable gases (zone 0), dusts (zone 20) and mining areas (group I M1).

DIMENSIONS (in mm) DIMENSIONS (in mm)

~35

PG9
PG7
36

~132
Ø22
<64

27A/F
22 A/F HEX
HEX
1/2"
BSP 20
15

Model shown GS4003 Model shown PR3100

66
 Genspec GS4000 Series
Standard Pressure Transmitter

TECHNICAL DATA

Type: GS4000/GS4100 GS4xx1 GS4xx2 GS4003/GS4103

Sensor Technology Ceramic Thick Film or Bonded Foil Strain Gauge

Output signal: 2 mV/V typical (4 wire) 0 - 5 V (3 or 4 wire) 0 - 10 V (3 or 4 wire) 4 - 20 mA (2 wire)

Supply Voltage: 10 VDC (5 - 15 V) 13 - 30 VDC 13 - 30 VDC 13 - 36 VDC
Pressure Reference: Gauge (up to 700 bar) or Absolute (up to 25 bar)
Protection of Supply
Protected against supply voltage reversal up to 50 V (amplified versions)
Voltage:
Standard Pressure 0-1 bar Vac; 0-0.5 bar; 0-1 bar; 0-10 bar; 0-25 bar; 0-100 bar; 0-250 bar; 0-700 bar
Ranges (bar): (other ranges available)
Standard Pressure 0-30 in Hg; 0-7.5 psi; 0-15 psi; 0-150 psi; 0-300 psi; 0-1,500 psi; 0-3,000 psi; 0-10,000 psi
Ranges (psi): (other ranges available)
1.6x from ranges -1 bar to 20 bar; 2x for ranges 25 bar to 250 bar; 1.5 for ranges 400 bar (6,000 psi)
Overpressure Safety:
to 700 bar (10,000 psi)
4-20 mA: RL < [UB - 13 V] / 20 mA (e.g. with supply voltage (UB) of 36V, max. load (RL) is 1150 Ω);
Load Driving Capability:
2 mV/V: n/a; 0-5 V: max. load RL > 5 KΩ; 0-10 V: max. load RL > 10 KΩ

Accuracy NLHR: ≤ ±0.4 % of span BFSL

Zero Offset and

±1.0 %FS at room temperature (GS4000/GS4100: ±0.2 mV)
Span Tolerance:
Operating Ambient
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:
Operating Media
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:
Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice

Temperature Effects: ±2% FS total error band for -20 °C to +70 °C. Typical thermal zero and span coefficients ±0.03 %FS/°C

Electromagnetic
Emissions: EN61000-6-4; Immunity: EN61000-6-2; Certification: CE Marked
Capability:

Insulation Resistance: > 100 MΩ @ 50 VDC

Response time 10-90 %: 1 mS
SAE 303 stainless steel, alumina and nitrile (NBR) seal for ranges up to 20 bar, and 17/4PH and SAE 303 stain-
Wetted Parts:
less steel for ranges above 20 bar
All fluids compatible with SAE 303 stainless steel, alumina and nitrile (NBR) seal for ranges up to 20 bar, and
Pressure Media:
17/4PH stainless steel for ranges above 20 bar
Pressure Connection: 1/4“ BSP male (G1/4) or 1/4“ NPT male (others options available)
Mating micro DIN socket EN175301-803 Form C (ex DIN43650), a screw terminal connector rated IP65 (other
Electrical Connection:
options available)

67
 S.13
Genspec
Protran

ORDER MATRIX

Type Electrical Pressure Process

Output Wires Connector Range Connection
2mV/V 4 GS4000
4 GS4001
0-5Vdc
3 GS4011
Model above 20 bar
4 GS4002
0-10Vdc
3 GS4012
4-20mA 2 GS4003
2mV/V 4 GS4100
4 GS4101
0-5Vdc
3 GS4111
Model up to 20 bar
4 GS4102
0-10Vdc
3 GS4112
4-20mA 2 GS4103

Electrical Connection / Option

DIN plug and socket –
Cable outlet 1m screened A
M12 connector B
Cable outlet 1m screened IP67 protection C
GS4003
Pressure Range in bar
0-1 bar Vac V001
0-0.5 bar 0.05
0-1 bar 0001
0-10 bar 0010
0-25 bar 0025
0-100 bar 0100
0-250 bar 0250
0-700 bar 0700

Process Connection
1/4" BSP male (G1/4) AB
1/4" NPT Male AM

Order Number Example GS4003–V001AB

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd
are calibrated using precision calibration equipment with traceability to international standards.

68
 Protran PR3100 Series
Standard Pressure Transmitter

TECHNICAL DATA

Type: PR3100 PR3101 PR3102 PR3103

Sensor Technology: Thick Film or Bonded Foil Strain Gauge

Output signal: 4 - 20 mA (2 wire) 2 mV/V typical (4 wire) 0 - 5 V (4 wire) 0 - 10 V (4 wire)
Supply Voltage: 13 - 36 VDC 10 VDC (5 - 15V) 13 - 30 VDC 13 - 30 VDC
Pressure Reference: Gauge or Absolute
Protection of Supply
Protected against supply voltage reversal up to 50 V (amplified versions)
Voltage:
Standard Pressure
0-1 bar Vac; 0-2.5 bar; 0-10 bar; 0-100 bar; 0-250 bar; 0-600 bar; 0-1,000 bar (other ranges available)
Ranges (bar):
Standard Pressure
0-30 in Hg; 0-30 psi; 0-150 psi; 0-1,500 psi; 0-3,000 psi; 0-10,000 psi; 0-15,000 psi (other ranges available)
Ranges (psi):
Overpressure Safety: 2x for ranges 1 bar to 400 bar; 1.5x for 600 bar range; 1.2x 1,000 bar range
4-20 mA: RL < [UB - 13 V] / 20 mA (e.g. with supply voltage (UB) of 36V, max. load (RL) is 1150 Ω); 2mV/V: n/a;
Load Driving Capability:
0-5 V: max load RL > 5 KΩ; 0-10 V: max load RL > 10 KΩ
Accuracy NLHR: ≤ ±0.3 % of span BFSL
Zero Offset and ±0.5 %FS at room temperature (PR3101: ±0.2 mV); 5 %FS (approx.) adjustment with easy access trimming
Span Tolerance: potentiometers on amplified versions only
Operating Ambient
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:
Operating Media
-20 °C to +85 °C (-4 °F to +185 °F)
Temperature:
Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice
Temperature Effects: ±1.5 %FS total error band for -20 °C to +70 °C. Typical thermal zero and span coefficients ±0.015 %FS/ °C
Ex II 1 G Ex ia IIC T4 Ga (Zone
ATEX/IECEx Approval 0) Ex II 1 D Ex ia IIIC T135 °C
n/a n/a n/a
(4-20mA version only): Da (Zone 20) Ex I M 1 Ex ia I
Ma (group 1 M1)

Ui = 28 V
Ii = 119 mA
Pi = 0.65 W
ATEX/IECEx Safety Li = 0.1 µH
Ci = 74 nF n/a n/a n/a
Values: Temperature Range =
-20*C to +70*C
Max. cable length = 45 m

Electromagnetic
Emissions: EN61000-6-4; Immunity: EN61000-6-2; Certification: CE Marked
Capability:
Insulation Resistance: > 100 MΩ @ 50 VDC
Response time 10-90 %: 1 mS
SAE 316 stainless steel, alumina and nitrile (NBR) seal for ranges up to 20 bar, and 17/4PH and SAE 316 stain-
Wetted Parts:
less steel for ranges above 20 bar

All fluids compatible with SAE 316 stainless steel, alumina and nitrile (NBR) seal for ranges up to 20 bar, and
Pressure Media:
17/4PH stainless steel for ranges above 20 bar

Pressure Connection: 1/4“ BSP male (G1/4); 1/4“ NPT male; 1/4“ BSP male (G1/2); 1/2“ NPT male (other options available)

69 Electrical Connection: Mating socket EN175301-803 Form A (ex DIN43650) rated IP65 with PG9 cable entry (other options available)
 S.13
Genspec
ORDER MATRIX Protran

Type Electrical Pressure Process

Output Wires Connector Range Connection
4-20 mA 2 PR3100
2 mV/V 4 PR3101
0-5 V 4 PR3102
0-10 V 4 PR3103

Electrical Connection / Option

DIN EN175301 plug and socket –
Cable outlet 1m screened A
M12 connector B
Cable outlet 1m screened IP67 protection C
ATEX/ IECEx certified with DIN EN175301 plug
EX
and socket

Pressure Range in bar

0-1 bar Vac V001
0-2.5 bar 02.5
0-10 bar 0010
0-100 bar 0100
0-250 bar 0250
0-600 bar 0600 PR3100
0-1,000 bar 1000

Process Connection
1/4" BSP male (G1/4) AB
1/4" NPT male AM
1/2" BSP male (G1/2) AC
1/2" NPT male AN

Order Number Example PR 310 0 –0 1 0 0 AC

For options not listed please contact sales team.

DISCLAIMER : ESI Technology Ltd operates a policy of continuous product development. We reserve
the right to change specification without prior notice. All products manufactured by ESI Technology Ltd 70
are calibrated using precision calibration equipment with traceability to international standards.
 S.14 Protran PR9000
and Protran PR9500
Heavy Duty and Wireless Pressure Transmitter

ESI__S.1 HP

Silicon-on-Sapphire sensor technology for outstanding

performance and reliability

Pressure ranges up to 1,500 bar

All stainless steel, robust construction for harsh

environments

Wireless version with receiver for lower installation

cost and maintenance

Wetted parts in various materials

ATEX/IECEx option available, including M1 for

mining applications (PR9000 only)

71
 S.14

DESCRIPTION
Developed for use in pressure applications that involve measurement of media in harsh environments, the
PR9000 and wireless PR9500 are designed with robust stainless steel housing construction and Silicon-on-
Sapphire strain gauge technology, together with a custom design amplifier offering excellent stability and
accuracy over a long service life.

The PR9000 has easily accessible screw terminal connections and the conveniently positioned zero/span potentiometers inside the screw
cover head for simplified on-site adjustment and installation. Cable entry to the transmitter head is through a PG9 gland or an optional
M20 conduit fitting. Pressure ranges are from vacuum to 1,500 bar. An optional ATEX and IECEx approved versions of the PR9000 is availa-
ble for explosion protection for flammable gases (zone 0), dusts (zone 20) and mining areas (group I M1).

The PR9500 wireless pressure transmitter, used in conjunction with the RX9500 receiver, provides a wireless solution for safe operation in
tough industrial and process applications eliminating the need for hard wiring. The transmitter can be situated in inaccessible areas, allo-
wing the operator to monitor at safe distances on site.

No hard wiring means lower installation cost and maintenance. The PR9500 transmitter operates by sending data signals by radio tele-
metry to a RX9500 receiver which provides a 4-20 mA output signal. Powered by an internal battery or 8-30 Vdc supply, the transmitter is
capable of sending data signals at distances of up to 200 metres. Pressure ranges are from vacuum to 1,500 bar.

DIMENSIONS (in mm) DIMENSIONS (in mm)

Ø73 Ø73

PG9

~175 ~175

1/2"BSP 27 A/F
HEX
20 20 1/2" BSP
THREAD

27 A/F HEX

Model shown PR900 Model shown PR9500

72
 Protran PR9000
Heavy Duty and Wireless Pressure Transmitter

TECHNICAL DATA

Type: PR9000

Sensor Technology: Silicon-on-Sapphire (>1 bar)/ Isolated Piezoresistive Silicon (≤1 bar)

Output signal: 4 - 20 mA (2 wire)

Supply Voltage: 13 - 36 VDC

Pressure Reference: Gauge

Protection of Supply Protected against supply voltage reversal up to 50 V

Voltage:

Standard Pressure 0-1 bar Vac; 0-500 mbar; 0-1 bar; 0-10 bar; 0-25 bar; 0-100 bar; 0-250 bar; 0-700 bar; 0-1,500 bar (Other options available)
Ranges (bar):

Standard Pressure 0-30 in Hg; 0-7.5 psi; 0-15 psi; 0-150 psi; 0-300 psi; 0-1,500 psi; 0-3,000 psi; 0-10,000 psi; 0-20,000 psi
Ranges (psi): (other options available)

Overpressure Safety: 2x for ranges 1 bar to 600 bar; 1.5x for 1000 bar range; 1.1x for 1,500 bar range

Load Driving Capability: 4-20 mA: RL < [UB - 13 V] / 20 mA (e.g. with supply voltage (UB) of 36V, max. load (RL) is 1150 Ω)

Accuracy NLHR: ≤ ±0.2 % of span BFSL

Zero Offset and ±0.5 %FS at room temperature

Span Tolerance: ±5 %FS (approx.) adjustment with easy access trimming potentiometers

Operating Ambient -20 °C to +85 °C (-4 °F to +185°F)

Temperature:

Operating Media -20 °C to +85 °C (-4 °F to +185°F)

Temperature:

Storage Temperature: +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice

Temperature Effects: ±1.5 %FS total error band for -20 °C to +70 °C. Typical thermal zero and span coefficients ±0.02 %FS/ °C

Ex II 1 G Ex ia IIC T4 Ga (zone 0)
ATEX/IECEx Approval Opti- Ex II 1 D Ex ia IIIC T135 °C Da (zone 20)
on: Ex I M 1 Ex ia I Ma (group 1 M1)

Ui = 28 V
Ii = 119 mA
Pi = 0.65 W
ATEX/IECEx Safety Values: Li = 0.1 µH
Ci = 66 nF
Temperature Range = -20 °C to +70 °C
Max. cable length = 85 m

Emissions: EN61000-6-4
Electromagnetic
Compatibility: Immunity: EN61000-6-2
Certification: CE Marked
Insulation Resistance: > 100 MΩ @ 50 VDC

Response time 10-90 %: 1 mS

Wetted Parts: SAE 316 stainless steel and titanium alloy

Pressure Media: All fluids compatible with SAE 316 stainless steel and titanium alloy

Pressure Connection: 1/2“ BSP male (G1/2); 1/2“ NPT male (other options available)

Screw terminals for conductor sizes 0.2 - 2.0 mm2 are located beneath the screw lid. Cable entry to head is
Electrical Connection: through an IP68 cable gland with compression seal for cable sizes 4 - 8 mm. Optional M20 Conduit fitting is
73 available.
 Protran Wireless PR9500
Wireless Pressure Transmitter

TECHNICAL DATA

Type: PR9500

Sensor Technology Silicon-on-Sapphire (>1 bar)/ Isolated Piezoresistive Silicon (≤1 bar)

Output signal: Radio transmission

Power Supply: Replaceable 3.2 Vdc (1/2AA) Lithium Thionyl Chloride battery or 8 - 30 Vdc supply

Pressure Reference: Gauge

Protection of Supply Voltage: Protected against supply voltage reversal up to 50 V

Standard Pressure 0-1 bar Vac; 0-500 mbar; 0-1 bar; 0-10 bar; 0-25 bar; 0-100 bar; 0-250 bar; 0-700 bar; 0-1500 bar (Other options available)
Ranges (bar):

Standard Pressure 0-30 in Hg; 0-7.5 psi; 0-15 psi; 0-150 psi; 0-300 psi; 0-1,500 psi; 0-3,000 psi; 0-10,000 psi; 0-20,000 psi
Ranges (psi): (other options available)

Overpressure Safety: 2x for ranges 1 bar to 600 bar; 1.5x for 1000 bar range; 1.1x for 1500 bar range

UHF Radio Transmitter: Low power (license free), transmission frequency 433.92 MHz

Wireless Receiver: RX9500 radio receiver station (contact sales team for more information)

Transmission Range: Point-to-point radio transmission up to 200m line-of-sight

Data Transmission Rate: Serial radio packet at 4800/9600 baud (up to 4 samples per second)

Resolution: > ±0.05 %FS (12 bit ADC)

Load Driving Capability: n/a

Accuracy NLHR: ≤ ±0.3 % of span BFSL

Zero Offset and Span ±0.5 %FS at room temperature; ±5 %FS (approx.) adjustment with easy access trimming potentiometers
Tolerance:
Operating Ambient -10 °C to +55 °C (+14 °F to +131 °F)
Temperature:
Operating Media -20 °C to +85 °C (-4 °F to +185°F)
Temperature:

Storage Temperature: +5 °C to +40 °C (recommended best practice)

Temperature Effects: ±1.5 %FS total error band for -10 °C to +55 °C. Typical thermal zero and span coefficients ±0.02 %FS/ °C

Electromagnetic Compati- ETSI EN 301 489; Certification: CE Marked

bility:

Radio Type Approvals: ETSI EN 300 220

Insulation Resistance: > 100 MΩ @ 50 VDC

Wetted Parts: SAE 316 stainless steel and titanium alloy

Pressure Media: All fluids compatible with SAE 316 stainless steel and titanium alloy

Pressure Connection: 1/4" BSP male (G1/2); 1/2" NPT male (other options available)

Screw terminals for conductor sizes 0.2 - 2.0 mm2 are located beneath the screw lid. Cable entry to head is through an IP68
Electrical Connection: cable gland with compression seal for cable sizes 4 - 8 mm. Optional M20 Conduit fitting is available.
74
 Protran RX9500
Radio Receiver

TECHNICAL DATA

Type: RX9500

Radio Type: FM Receiver

Sensitivity: -107 dBm (range of 200m line of sight)

Identification Address: 8 bit, 256 selectable combinations
Communication Watch-
128 seconds before alarm output is activated
dog:

Alarm Output: Open drain switch, max. current 250 mA

Analogue Output: 4-20 mA (2 wire)

Output Compliance: 8.5 Vdc

Resolution: > ±0.05 %FS (12 bit ADC)

Power Requirements: 110/240 V, 50-60 Hz or 10.5-30 VDC

Current Requirements: 32 mADC

Housing: High impact polycarbonate, rated to IP65

Dimensions: 200 x 120 x 75 mm

Weight: ~ 1 Kg

Operating Temperature: -10 °C to +55 °C (+14 °F to 131 °F)

Storage Temperature: -20 °C to +65 °C (-4 °F to +149 °F)

Antenna: 1/4 wave helical in plastic moulding
RF Connector: External BNC
Cable Entry: IP65 nylon cable gland for cable diameter 4 - 8 mm
Electrical Connections: Screw terminal plug & socket. Wire size from 0.5 - 1.5 mm2

75
 S.14
Protran

ORDER MATRIX

Electrical
Type Pressure Process
Connec-
Output Range Connection
tor
4-20 mA (2 wire) Standard PR9000
Radio Transmission Wireless PR9500

Radio Receiver to be used with PR9500

RX9500
Wireless Transmitter

Electrical Connection / Option

Cable gland IP68 –
M20 Conduit M
ATEX/ IECEx certified with DIN EN175301 plug
EX
and socket (PR9000 only)

Pressure Range in bar

0-1 bar Vac V001
0-0.5 bar 00.5
0-1 bar 0001
0-10 bar 0010
0-25 bar 0025 PR9000
0-100 bar 0100
0-250 bar 0250
0-700 bar 0700
0-1,500 bar 1500

Process Connection
1/2" BSP male (G1/2) AC
1/2" NPT male AN

Order Number Example PR 9 0 0 0 EX1 0 0 0 AC

For options not listed please contact sales team.

PR9500

76
 S.15 Accessories PM8005/6 |
ADHT | PM1000

ESI__S.1 HP

Panel Meter

High temperature pressure adapter

Plug-in display

77
 S.15

DESCRIPTION
The ESI product range includes high quality accessories in order to grant users the
optimal installation solution in all applications

ADHT
The ADHT Cooling Coil Adapter provides thermal isolation for a pressure transducer from hot liquid or
gas media.

It is an ideal solution for applications where the media temperature exceeds the rating of a pressure
transducer or transmitter. The Cooling Coil adapter will reduce the temperature of the media before it
makes contact with the transducer sensing element. The ADHT can be used with media up to 200 °C
and with pressure ranges up to 400 bar max. Constructed entirely from 316L stainless steel, and available
with ¼” BSP male process connection as standard. It offers a simple yet effective solution to high tem-
perature applications when used with ESI pressure sensors.

PM1000
The PM1000 series is a 4 digit LED plug-on display for use with transmitters with 4-20mA 2 wire output
and fitted with DIN43650 connector. It provides a local display for a multitude of applications. Model
PM1001 offers an integral open-drain switch output.

The plug-on display simply fits between the transmitter plug and connecting cable socket and is
powered from the 4-20 mA current loop signal of the transmitter. No additional power source
is required.

PM8005/ PM8006
The PM8005/6 Series digital panel meters are easy to set up and commission, whilst offering extremely
high precision and long term reliability.
A menu-free calibration system is employed with this panel meter design. This makes calibration and
set-up of operating parameters very straightforward and radically simplifies this process compared with
the usual menu arrangement used on most digital meters.

PM1000 PM8005/8006 ADHT 78

 ESI wordwide:
International sales partners

CHILE
HEAD OFFICE Eathisa Chile
Tel.: +51 01 221 0671
ESI Technology Ltd www.eathisa.com
[email protected] DUBAI & ABU DHABI
Tel.: +44 (0)1978 262255
Gulf Oil & Gas International
www.esi-tec.com Tel.: +971 4 4207528
[email protected] www.goi-international.com
CHINA
instrumentation@
Beijing Oriental New Power goi-international.com
Tel.: +86 010 51233070
Fax: +86 010 51233071
AUSTRALIA www.bjonp.com
[email protected] FINLAND
ADM Systems PTY Ltd
Tel.: +61 3 9551 6922 Mintai Hydraulics Shanghai Co., OEM Finland Oy
Fax: +61 3 9551 6977 Ltd. Tel.: +358 207499499
Fax: +358 207499456 INDIA NORTH
www.admtech.com.au Tel.: +86 21 68393909 811
[email protected] Fax: +86 21 51969769 www.oem.fi Beda Flow Systems Pvt. Ltd.
www.mt-hydraulics.com [email protected] Tel.: +91 120 4329990 91
[email protected] Fax: +91 120 4080022
www.bedaflow.com
[email protected]
AUSTRIA FRANCE
BIBUS Austria Ges.m.b.H. COLOMBIA Suco VSE France INDIA SOUTH
Tel.: +43 2242 33388 ISATECK Tel.: +33 243141421
Fax: +43 2242 3338810 Tel.: +571 8855336 Fax: +33 243141425 Adroit Technologies
www.bibus.at Tel: +575 3686974 www.sucovse.fr Tel.: +91 9663395186
[email protected] www.isateck.com [email protected] Fax: +91 1147619422
[email protected] [email protected]

BELGIUM GERMANY
CROATIA INDONESIA
BINTZ TECHNICS NV SUCO Robert Scheuffele GmbH
Tel.: +32 (0) 2 720 4916 Bibus Zagreb d.o.o. & Co. KG PT Surya Sarana Dinamika
Fax: +32 (0) 2 720 37 50 Tel.: +385 13818004 Tel.: +49 7142 597 0 Tel.: +62 21 65835077 78
www.bintz.be Fax: +385 13818005 Fax: +49 7142 980151 Fax: +62 21 65835079 80
[email protected] www.bibus.hr www.suco.de www.suryasarana.com
[email protected] [email protected] [email protected]

BRAZIL CZECH REP GREECE ITALY

Pressure Comercial Ltda. Bibus s.r.o. SIGMA HELLAS LTD Ma.in.a s.r.l.
Tel.: +55 1146882113 Tel.: +420 547125300 Tel.: +30 210 4522745 Tel.: +39 02 55300732
Fax: +55 1142084028 Fax: +420 547125310 Fax: +30 210 4519020 Fax: +39 02 55300762
www.pressuresensors.com.br www.tlakovespinace.cz www.sigmahellas.gr www.mainasrl.it
[email protected] [email protected] [email protected] [email protected]

BULGARIA DENMARK HOLLAND JAPAN

BIBUS Bulgaria OOD OEM Automatic Klitso A/S Solar Nederland BV Japan Flow Controls Co., Ltd.
Tel.: +359 (0)2 971 76 10 Tel.: +45 70106400 Tel.: +31 88 765 27 00 Tel.: +81 352093393
Fax: +359 (0)2 927 32 64 Fax: +45 70106410 Fax: +31 72 5192790 Fax: +81 352568838
www.bibus.bg www.oemklitso.dk www.solarnederland.nl www.flow-jfc.com
[email protected] [email protected] [email protected] [email protected]
79
 SINGAPORE
Elshin International Pte Ltd
Tel.: +65 6286 7707
Fax: +65 6747 2477
www.elshin.com
[email protected]
TIS Instruments (S) Pte Ltd TAIWAN
Tel.: +65 67799272
Fax: +65 68738262 Daybreak Int'l (Taiwan) Corp.
www.tiscalibrator.com Tel.: +886 288661234
[email protected] Fax: +886 288661239
www.daybreak.com.tw
[email protected]

SLOVAKIA
Bibus s.r.o.
Tel.: +421 37 7777 911 THAILAND
Fax: +421 37 7777 968
www.bibus.sk CNS Universal Company Limited
[email protected] Tel.: +66 2 0195581 4
Fax: +66 2 0195587
www.cns-universal-com
[email protected]
KOREA PHILLIPINES SLOVENIA
Inter Instrument Co., Ltd
Continental Global Ltd Active Control Engineering and Inoteh d.o.o. (Bibus group) Tel.: +66 2 9343009
Tel.: +82 2 4221615 Supplies Tel.: +386 (0)2 665 11 31 Fax: +66 2 9343008
Fax: +82 2 414 6977 Tel.: +632 498-0818 Fax: +386 (0)2 665 20 81 www.inter-instrument.co.th
www.suco.co.kr [email protected] www.inoteh.si [email protected]
[email protected] [email protected]

UK
MALAYSIA POLAND SOUTH AFRICA
OEM Automatic Ltd
Active Control Asiatech (M) Bibus Menos Sp. Z.o.o Temperature Controls Tel.: +44 (0)1162 849900
Sdn Bhd Tel.: +48 58 762 72 06 Tel.: +27 11 7916000 Fax: +44 (0)1162 841721
Tel.: +60 03 7773 1633 Fax: +48 58 661 71 32 Fax: +27 11 7921140 www.oem.co.uk
Fax: +60 03 7773 1669 www.bibusmenos.pl www.tempcon.co.za [email protected]
www.activecontrol.com.my [email protected] [email protected]
[email protected]

UKRAINE
PORTUGAL SPAIN
NEW ZEALAND Bibus Ukraine TOV
Bibus Portugal, Lda. Instrumentos de Medida S.L Tel.: +380 445454404
ADM Systems PTY Ltd Tel.: +351 22 906 50 50 Tel.: +34 913000191 Fax: +380 445455483
Tel.: +61 3 9551 6922 Fax: +351 22 906 50 53 Fax: +34 913885433 www.bibus.ua
Fax: +61 3 9551 6977 www.bibus.pt www.idm-instrumentos.es [email protected]
www.admtech.com.au [email protected] [email protected]
[email protected]

USA
ROMANIA SWEDEN
NORWAY Ellison Sensors Inc.
SC Bibus SES SRL OEM Automatic AB Tel.: +1 561 989 8540
Autek Tel.: +40 0256 200500 Tel.: +46 (0)75 242 41 75 Fax: +1 561 989 8816
Tel.: +47 32219200 Fax: +40 0256 220666 Fax: +46 (0)75 242 41 19 www.esi-transducer.com
Fax: +47 32219201 www.bibus.ro www.oemautomatic.se [email protected]
www.autek.no [email protected] [email protected]
[email protected]

VIETNAM
RUSSIA SWITZERLAND
PERU QUYNH Engineering
Bibus o.o.o. Bibus AG Corporation
Eathisa Peru SA. Tel.: +7 495 703 04 42 Tel.: +41 44 877 50 11 Tel.: +84 837715330
Tel.: +51 01 221 0671 Fax: +7 499 786 42 67 Fax: +41 44 877 50 19 Fax: +84 837715330
www.eathisa.com www.bibus.ru www.bibus.ch www.quynh.vn
[email protected] [email protected] [email protected] [email protected]
80
 Notes:

81
Notes:

82
 www.esi-tec.com

Download
ESI Technology Ltd
The ESI Pressure
Converter Publisher ESI Technology,
Sensor House, Wrexham
Mobile App Technology Park, Wrexham LL13 7YP
The ESI Pressure converter allows
2. Edition, October 2017
you to quickly and easily access No of prints 1000pcs
a pressure conversion tool, Part No: ESI-2017-18
whether out on-site or in the office.
© Content and design are protected by copyright. May be
164 reproduced only with prior permission of the publisher. 164