Scribd
Upload
508 views1 page

WIFI Kit 32

This document provides a pinout diagram for a WIFI kit with 32 pins. It lists the pin functions such as power, ground, GPIO ports, analog pins, DAC, SPI, I2C, and serial pins. It notes that GPIO pins are only 3.3V tolerant and some pins are used for the on-board OLED display.

Uploaded by

luca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
508 views1 page

WIFI Kit 32

This document provides a pinout diagram for a WIFI kit with 32 pins. It lists the pin functions such as power, ground, GPIO ports, analog pins, DAC, SPI, I2C, and serial pins. It notes that GPIO pins are only 3.3V tolerant and some pins are used for the on-board OLED display.

Uploaded by

luca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GND WIFI Kit 32 Pinout Diagram

Power

Control Notes:

Touch Pin *GPIO input only


*ADC preamplifier
GPIO Port pin GND GPIOs are 3.3V tolerant only
GND
Analog Pin 5V 5V

DAC 3V3 3V3


RST GND
Serial SPI I2C
TPUCH4 ADC2_4 GPIO13 13 TX CLX3 GPIO1 UO_TXD
Physical Pin
TOUCH5 ADC2_5 GPIO12 12
On-board RX CLX2 GPIO3 UO_RXD
hardware Pin TOUCH6 ADC2_6 GPIO14 14 15 GPIO15 ADC2_3 HSPI_CSO Touch3 OLED_SCL
TOUCH7 ADC2_7 GPIO27 27 2 CS GPIO2 ADC2_2 HSPI_WP Touch2
DAC1 ADC2_9 GPIO26 26 0 CLK1 GPIO0 ADC2_1 Touch1 Button
LED DAC2 ADC2_8 GPIO25 25 4 GPIO4 ADC2_0 HSPI_HD Touch0 OLED_SDA
Touch8 ADC1_5 GPIO33* XTAL32 33 16 GPIO16 U2_RXD OLED_RST
Touch9 ADC1_4 GPIO32* XTAL32 32 17 GPIO17 U2_TXD
ADC1_7 GPIO35* 35 5 GPIO5 V_SPI_CSO

ADC1_6 GPIO34* 34 18 SCK GPIO18 V_SPI_CLK

ADC1_3* GPIO39* Sensvn 39 23 MOSI GPIO23 V_SPI_D

ADC1_2* GPIO38* CapVN 38 19 MISO GPIO19 V_SPI_Q UO_CTS


ADC1_1* GPIO37* CapVP 37 22 SCL GPIO22 V_SPI_WP UO_RTS

ADC1_0* GPIO36* Sensevp 36 21 SDA GPIO21 V_SPI_HD

WIFI Kit 32
Pins with this arrow are used by on-board OLED, they must not be used
for other purpose unless you know what you are doing!

You might also like