T

WELL CONTROL EQUIPMENT

2015-February

Shanghai SK Petroleum Equipment Co.,Ltd.

Add: 1769 Puxing Road,Shanghai 201114,China
Tel: 86-21-64293625 / 64290260
Fax: 86-21-34030004
Http: // www.shenkai.com www.shenkai.com
 SK provides all kinds of S Type and U Type BOP Stacks (Annular / Ram Type BOP), accumulator system, TYPE S Ram BOP
choke & kill Manifolds. The products are manufactured according to API, GOST, etc. They are applicable
to working conditions, such as cold area (-60℃), forest area (wet 90%), desert area (+60℃), offshore rig The design and manufacture of Type S Ram BOP is according to API Spec 16A standard. Type S Ram
(high causticity) and widely used in Russia, CIS nations, South and North America, Middle East, South- BOP can be equipped with rams of various sizes.
east Asia, Africa regions, etc.

Structure Features:
- Provide special BOPs such as low temp. BOPs / BOP operating under pressure/ Rotating BOPs / Tubing BOPs, etc - Use floating type side door seal, making it more reliable in sealing
- Many kinds of Accumulator Systems such as pneumatic, electric and wireless control types, 1 to 20 control objects for - Use buried oil way inside body. Loading hinge is separated from hydraulic hinge
standard, extendable - Use arc-shaped body chamber with four round corners as transition section to reduce stress peak value whenever bearing
- Bore Size Range：2 1/16”～30” the pressure
- Pressure Range：3.5 MPa～140MPa - Ram cavity can be fitted with ram assembly of same type BOP made abroad
- H2S Service Range： According to NACE MR0175 - Reliable fixed structure to make it more compact than the same type of products made abroad

Type S Double Ram BOP Flange Connection Annular BOP

1 www.shenkai.com 2
 Dimension Drawing of Type S Single Ram BOP Dimension Drawing of Type S Double Ram BOP

Operat- Vertical Main drift Operat- Vertical Main drift

Size ing diame- diameter L W H Weight Size ing diame- diameter L W H Weight
Remarks Remarks
（in.） Pressure ter connection (mm) (mm) (mm) （Kg） （in.） Pressure ter connection (mm) (mm) (mm) （Kg）
（psi） （in.） flange form （psi） （in.） flange form

7 1/16 5,000 7 1/16 A 1420 633 624 977 7 1/16 5,000 7 1/16 A 1420 633 910 1724
7 1/16 10,000 7 1/16 A 1720 715 829 2291 7 1/16 10,000 7 1/16 A 1720 715 1262 3520
Allowed to be fitted with a Allowed to be fitted with a
7 1/16 10,000 7 1/16 B 2684 715 700 2490 shear ram 7 1/16 10,000 7 1/16 B 2684 715 1064 3830 shear ram
Allowed to be fitted with a Allowed to be fitted with a
7 1/16 15,000 7 1/16 A 1842 934 922 3405 shear ram 7 1/16 15,000 7 1/16 A 1842 934 1372 6291 shear ram
9 3,000 9 A 1700 595 580 1078 9 3,000 9 A 1700 595 860 2016
9 5,000 9 A 2036 815 820 2033 9 5,000 9 A 2036 815 1200 3669
9 10,000 9 B 2384 940 809 3450 9 10,000 9 B 2384 940 1289 6672
9 15,000 9 B 2170 1048 880 4760 9 15,000 9 B 2170 1048 1378 7324
11 3,000 11 A 2265 895 802 2640 11 3,000 11 A 2265 895 1228 4661
11 5,000 11 A 2265 820 943 3646 11 5,000 11 A 2265 820 1337 7022
11 5,000 11 A 2363 866 980 3800 Allowed to be fitted with a 11 5,000 11 A 2363 866 1470 6300 Allowed to be fitted with a
shear ram shear ram
11 10,000 11 A 2384 940 1047 4067 11 10,000 11 A 2384 940 1582 6940
11 15,000 11 A 2640 1167.5 1244 7154 Allowed to be fitted with a 11 15,000 11 A 2640 1167.5 1784 12686 Allowed to be fitted with a
shear ram shear ram
13 5/8 5,000 13 5/8 A 2468 970 950 4398 13 5/8 5,000 13 5/8 A 2468 970 1430 7814
13 5/8 10,000 13 5/8 A 3274 1488 1275 9485 Allowed to be fitted with a 13 5/8 10,000 13 5/8 A 3274 1488 1732 14582 Allowed to be fitted with a
shear ram shear ram
13 5/8 15,000 13 5/8 A 3074 1305 1420 12035 Allowed to be fitted with a 13 5/8 15,000 13 5/8 A 3074 1305 1985 18439 Allowed to be fitted with a
shear ram shear ram
16 3/4 5,000 16 3/4 A 2923 1188 1090 5330 16 3/4 5,000 16 3/4 A 2923 1188 1570 10260
20 3/4 3,000 20 3/4 A 3424 1238 1070 5938 18 3/4 10000 18 3/4 D 3430 1449 1490 18394
21 1/4 2,000 21 1/4 A 3366 1205 915 6605 20 3/4 3,000 20 3/4 A 3424 1238 1655 14000
21 1/4 5,000 21 1/4 A 3614 1445 1320 8800 21 1/4 2,000 21 1/4 A 3366 1205 1505 10435
26 3/4 3,000 26 3/4 A 4350 1663 1250 12713 21 1/4 5,000 21 1/4 A 3590 1445 1950 17252
26 3/4 3,000 26 3/4 A 4350 1663 2050 22980

3 www.shenkai.com 4
 SWL-*T

Type U Double Ram BOP Type U Single Ram BOP

Side View Front View

Ram BOPs —— Type U BOPs Type U Single Ram BOP

Type U BOPs are manufactured according to API Spec 16A standards and equipped with rams of
A-1 Length—the ram is closed and locking shaft is locked
various sizes. With the best quality front ram rubber, top ram rubber and flange sealing stacks, TYPE A-2 Length—the ram is opened and the locking shaft is locked
U ram BOP can work in the extreme woking conditions including extremely high or low temperature B Height—flange connection
and extreme chemical environment. C Width—excluding the bypass outlet

Size Working Pressure Vertical Path A-1 A-2 B C Weight

Technical Specification: （in.） （psi） （in.） (mm) (mm) (mm) (mm) （Kg）
- The pressure-bearing components are forged, so it has better strength and impact toughness
7 1/16 3,000 7 1/16 1880 2780 611 515 1400
- Floating sealing is applied to the cylinder cover and the open / close of the cover is realized by hydraulic power, so it is
quick and convenient for changing rams 7 1/16 5,000 7 1/16 1880 2780 699 515 1500
- The auxiliary oil cylinder affords a smaller volume with same function 7 1/16 10,000 7 1/16 2507 3303 806 757 2072
- The ram rubber has massive storage volume and it adopts self-contained sealing 7 1/16 15,000 7 1/16 2477 3273 832 768.8 2195
- The standard configuration includes a manual locking device, which ensures that the ram is closed tightly in case there is a
11 3,000 11 3105 4165 750 640 2406
hydraulic pressure loss
- Both the manual and hydraulic locking device and the auxiliary oil cylinder can be installed flexibly into different position 11 5,000 11 3105 4165 898 648 4200
according to customers' requirements, and the installation position can be changed easily 11 10,000 11 2996 4030 942 892 3845
- Ram cavity can be fitted with ram assembly of the same type of BOP made abroad 11 15,000 11 3305 4393 1205 1080 6725
- The inner body could be inlayed by inconel, which meets demands of high H2S service
13 5/8 3,000 13 5/8 3200 4356 795 743 3260
13 5/8 5,000 13 5/8 3627 4895 982 840 6540
13 5/8 10,000 13 5/8 3707 4893 1027 850 5555UM
13 5/8 15,000 13 5/8 3957 5319 1340 1156 9291UM
20 3/4 3,000 20 3/4 4120 5800 1030 1120 8100
21 1/4 2,000 21 1/4 4120 5800 940 1110 7600
21 1/4 5,000 21 1/4 4484 6364 1259 1178 14000

The weight is calculated according to top and bottom flange type.

5 www.shenkai.com 6
 Annular BOP
SWL-*T

The design and manufacture of Annular BOP is according to API Spec 16A standard.

Technical Specification
- Packing element is spherical or tapered type with massive storage volume, low operation pressure and excellent sealing
function
- Bonnet is hemispherical-shaped, so there is no stress concentration on bonnet whenever bearing the pressure. So the
pressure is evenly distributed, convenient for disassembly and assembly (except tapered packing element)
Side View Front View - Piston is set in low position to have a shorter moving distance. Use wear ring on piston
- Lip type seal rings are used to realize long service life

Type U Doulbe Ram BOP

A-1 Length—the ram is closed and the locking shaft is locked
A-2 Length—the ram is opened and the locking shaft is locked
B Height—flange connection
C Width—excluding the bypass outlet

Size Working Pressre Vertical Path A-1 A-2 B C Weight

（in.） （psi） （in.） (mm) (mm) (mm) (mm) （Kg） Wedge Block Connection Annular BOP Flange Connection Annular BOP Claw Plate Connection Annular BOP
7 1/16 3,000 7 1/16 1880 2780 1041 515 2270
7 1/16 5,000 7 1/16 1880 2780 1122 515 2360
7 1/16 10,000 7 1/16 2507 3303 1216 757 3644 Annular BOP Classification
7 1/16 15,000 7 1/16 2477 3273 1242 768.8 4066 Working- Drift diameter（in）
11 3,000 11 3105 4165 1250 640 4500 Pressure
11 5,000 11 3105 4165 1380 748 7310 （psi） 7 1/16 9 11 13 5/8 16 3/4 18 3/4 20 3/4 21 1/4
11 10,000 11 2996 4030 1440 892 7282
2000 Flanged - Flanged Flanged - - - Claw
11 15,000 11 3305 4393 1840 1080 12068 plate
13 5/8 3,000 13 5/8 3200 4356 1356 743 6500
Wedge Claw
3000 Flanged Flanged Flanged Flanged block - plate -
13 5/8 5,000 13 5/8 3627 4895 1542 840 12200
13 5/8 10,000 13 5/8 3707 4893 1455 1027 10101UM Wedge
5000 Flanged Flanged Flanged Flanged - - Claw
13 5/8 15,000 13 5/8 3957 5319 2076 1156 15994UM block plate

20 3/4 3,000 20 3/4 4120 5800 1676 1120 15600 Wedge Wedge Wedge Wedge
10000 Flanged
block block block
-
block
- -
21 1/4 2,000 21 1/4 4120 5800 1590 1110 14500
21 1/4 5,000 21 1/4 4884 6364 2081 1178 26700
The weight is calculated according to top and bottom flange type.

7 www.shenkai.com 8
 Coil Tubing BOP Accumulator System For Surface-mounted BOP Stacks
- Advanced design principle, combinet configuration, complete function, - The product design and manufacture are strictly comply with API
fit special condition Spec 16D Standard, fit for CE Ex-proof requirements, stable in
- Professional design, efficiently balance pressure in cavities before closing working and safe for use
blind and pipe rams to ensure safety - Optional types of Pneumatic, Electric and wireless control, etc.
- Exchangeable structure design of Slip type ram, special teeth-shape - Standard of 1～20 control unit, extendable
design to protect tubes - Widely use in circumstances of temperatures, fit for cold area (-60 °
- Quick joint at open and close port of oil control lines with proctection C), forest area (wet 90%), desert area (+60 ° C), offshore rigs (high
device for easy operation and safety causticity) environments, etc
- Equipment pressure device for shearing booster, to make neat shearing - Automatic and intelligent operation
- Being able to Equipment pressure sensor at side outlets to monitor - Real time feedback of each working condition, intelligent
pressure of well head alarming
Electric Hydraulic Control Systems for Surface-mounted BOP Stacks

Choke And Kill Manifold Main Parameters of Electric Hydraulic Control Systems

Rated working pressure of the system 21 Mpa 3000 psi

Choke and Kill Manifold are necessary in well control process. The choke valves can be used for
controling the casing pressure to stablize the well bottom pressure when drilling. And while the Pressure regulating rang of the system 0~14 Mpa 3000 psi
normal circum of mud was blocked, it is able to balance the inner pressure with ground by pushing
mud through Kill Manifold by pump. Choke and Kill Manifold can also be used for well washing. Nitrogen charging pressure of accumulator 7±0.7 Mpa 3000 psi

Pressure controller setting range 18.9~21 Mpa 2700~3000psi

Gas – hydraulic switch setting range 18.9~21 Mpa 2700~3000psi

Air supply pressure 0.65~0.8 Mpa 93~115psi

380±19V / 50Hz
Power supply Operational as requirement
by customer

Control power supply 24V DC

Kill manifold Choke manifold
Elevating type kill manifold Elevating type choke manifold

9 www.shenkai.com 10
 Configuration Parameter of Electric Hydraulic Control Systems Functional Configuration Of Electric Hydraulic Control System
No. of Accumulator unit Explosion proof motor Pump system displacement Rated operating Maximum operating PN-T Zero
Model control power(Kw) pressure of the pressure of the Electric Pneumatic Manual Alarm Standby Protection Insulated Driller’s Auxiliary Pipe Rack Automatic Pressure
Objects Total Available Installation Triplex Pneumatic pump Model Oil Pump Oil Pump Oil Pump Device Nitrogen House House House Console And Hose Recording Starting
system system Sysem
Volume(L) volume(L) pump(mL/r) （mL/strok） System System
(Mpa) (Mpa)

FKDQ1600-14 14 80×20 800 Side/ Back 18.5×2 80×2 120×4 21 31.5 FKDQ1600-14 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○

FKDQ1600-12 12 80×20 800 Side/ Back 18.5×2 80×2 120×4 21 31.5 FKDQ1600-12 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○

FKDQ1600-10 10 80×20 800 Side/ Back 18.5×2 80×2 120×4 21 31.5 FKDQ1600-10 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ1440-14 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ1440-14 14 60×24 720 Side/ Back 18.5×2 80×2 120×4 21 31.5
FKDQ1280-10 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ1280-10 10 80×16 640 Side/ Back 18.5×2 80×2 120×3 21 31.5
FKDQ1280-9 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ1280-9 9 80×16 640 Side/ Back 18.5×2 80×2 120×3 21 31.5
FKDQ 1280-8 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ1280-8 8 80×16 640 Side/ Back 18.5×2 80×2 120×2 21 31.5
FKDQ1280-7 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ1280-7 7 80×16 640 Side/ Back 18.5×2 80×2 120×2 21 31.5 FKDQ1200-9 ● ● ○ ○
○ ● ○ ● ○ ● ○ ○
FKDQ1200-9 9 60×20 600 Side/ Back 18.5×2 80×2 120×3 21 31.5 FKDQ1200-8 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ1200-8 8 60×20 600 Side/ Back 18.5×2 80×2 120×2 21 31.5 FKDQ960-8 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ960-8 8 60×16 480 Side/ Back 18.5×2 80×2 120×2 21 31.5 FKDQ960-7 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○

FKDQ960-7 7 60×16 480 Side/ Back 18.5×2 80×2 120×2 21 31.5 FKDQ800-8 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ 800-7 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ800-8 8 40×20 400 Side/ Back 18.5 80 120 21 31.5
FKDQ 800-6 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ 800-7 7 40×20 400 Side/ Back 18.5 80 120 21 31.5
FKDQ720-7 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ 800-6 6 40×20 400 Side/ Back 18.5 80 120 21 31.5
FKDQ 720-6 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ720-7 7 60×12 360 Side/ Back 18.5 80 120 21 31.5
FKDQ 640-6 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ 720-6 6 60×12 360 Side/ Back 18.5 80 120 21 31.5 FKDQ 640-5 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ 640-6 6 40×16 320 Side/ Back 18.5 80 120 21 31.5 FKDQ 480-5 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ 640-5 5 40×16 320 Side/ Back 18.5 80 120 21 31.5 FKDQ 480-4 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ 480-5 5 40×12 240 Side/ Back 18.5 80 120 21 31.5 FKDQ320-5 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○

FKDQ 480-4 4 40×12 240 Side/ Back 18.5 80 120 21 31.5 FKDQ320-4 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○

FKDQ320-5 40×8 21
FKDQ320-3 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
5 160 Side/ Back 15 60 120 31.5
FKDQ240-3 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ320-4 4 40×8 160 Side/ Back 15 60 120 21 31.5
FKDQ200-4 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ320-3 3 40×8 160 Side/ Back 15 60 120 21 31.5
FKDQ160-3 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ240-3 3 40×6 120 Side/ Back 15 60 120 21 31.5
FKDQ150-2 ● ● ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ200-4 4 25×8 100 Side/ Back 15 60 120 21 31.5 FKDQ125-3 ● × ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ160-3 3 40×4 80 Side/ Back 15 60 120 21 31.5 FKDQ80-3 ● × ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ150-2 2 50×3 75 Side/ Back 15 60 120 21 31.5 FKDQ80-2 ● × ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ125-3注6 3 25×5 62.5 Side/ Back 7.5/11 28 × 21 21 FKDQ75-2 ● × ○ ● ○ ● ○ ● ○ ○ ○ ○

FKDQ80-3注6 3 40×2 40 Side/ Back 7.5 28 × 21 21 FKDQ63-2 ● × ○ ● ○ ● ○ ● ○ ○ ○ ○

FKDQ80-2注6 2 40×2 40 Side/ Back 7.5 21 FKDQ50-2 ● × ○ ● ○ ● ○ ● ○ ○ ○ ○

28 × 21
FKDQ40-2 ● × ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ75-2注6 2 25×3 62.5 Side/ Back 7.5 28 × 21 21
FKDQ25-2 ● × ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ63-2注6 2 63×1 31.5 Side/ Back 7.5 28 × 21 21
FKDQ25-1 ● × ○ ● ○ ● ○ ● ○ ○ ○ ○
FKDQ50-2 注6 2 25×2 25 Side/ Back 7.5 28 × 21 21
Note:
FKDQ40-2注6 2 40×1 20 Side/ Back 7.5 28 × 21 21
- Listed above are basic configurations of our products, where,“●”represents basic configuration and “○” optional
- The optional configuration here doesn’t mean that it is available in any model, which should be discussed at time of contract conclusion
FKDQ25-2注6 2 25×2 12.5 Side/ Back 7.5 28 × 21 21 - Protection room width:2100mm for common room and 2300mm for room with thermal insulation
- Listed above are basic configurations, but special design and manufacturing can be provided upon request
FKDQ25-1注6 1 25×2 12.5 Side/ Back 7.5 28 × 21 21 - The auxiliary driller’s console can be based on buttons or touch screen
- Pneumatic pump is not available to FKDQ series liquid control equipment. The remote console must be provided with air supply interface for pneumatic control

11 www.shenkai.com 12
 Configuration Parameters Of Pneumatic Hydraulic Control System Functional Configuration Of Pneumatic Hydraulic Control System
number of Accumulator unit Explosion proof motor Pump system displacement Rated operating Maximum operating Eletric oil Pneumatic oil Manual oil Standby Protection Insulated Driller’s Auxiliary Pipe rack and Zero pressure
controlled Model Alarm device
Model Total Installation
power(Kw) pressure of the pressure of the pump pump pump nitrogen house house console console hose starting
objects Available liquid Triplex Pneumatic pump
system system system system
Volume(L) volume(L) mode pump(mL/r) （mL/strok）
(Mpa) (Mpa)
FKQ1600-14 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ1600-14 14 80×20 800 Side/ Back 18.5×2 80×2 120×4 21 31.5
FKQ1600-12 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ1600-12 12 80×20 800 Side/ Back 18.5×2 80×2 120×4 21 31.5 FKQ1600-10 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ1600-10 10 80×20 800 Side/ Back 18.5×2 80×2 120×4 21 31.5 FKQ1440-14 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ1440-14 14 60×24 720 Side/ Back 18.5×2 80×2 120×4 21 31.5 FKQ1280-10 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ1280-10 10 80×16 640 Side/ Back 18.5×2 80×2 120×3 21 31.5 FKQ1280-9 ● ● ○ ○ ○ ● ○ ● ○ ○ ○

FKQ1280-9 9 80×16 640 Side/ Back 18.5×2 80×2 120×3 21 31.5 FKQ 1280-8 ● ● ○ ○ ○ ● ○ ● ○ ○ ○

FKQ1280-8 8 80×16 640 Side/ Back 21 FKQ1280-7 ● ● ○ ○ ○ ● ○ ● ○ ○ ○

18.5×2 80×2 120×2 31.5
FKQ1200-9 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ1280-7 7 80×16 640 Side/ Back 18.5×2 80×2 120×2 21 31.5
FKQ1200-8 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ1200-9 9 60×20 600 Side/ Back 18.5×2 80×2 120×3 21 31.5
FKQ960-8 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ1200-8 8 60×20 600 Side/ Back 18.5×2 80×2 120×2 21 31.5
FKQ960-7 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ960-8 8 60×16 480 Side/ Back 18.5×2 80×2 120×2 21 31.5 FKQ800-8 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ960-7 7 60×16 480 Side/ Back 18.5×2 80×2 120×2 21 31.5 FKQ 800-7 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ800-8 8 40×20 400 Side/ Back 18.5 80 120 21 31.5 FKQ 800-6 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ 800-7 7 40×20 400 Side/ Back 18.5 80 120 21 31.5 FKQ720-7 ● ● ○ ○ ○ ● ○ ● ○ ○ ○

FKQ 800-6 6 40×20 400 Side/ Back 18.5 80 120 21 31.5 FKQ 720-6 ● ● ○ ○ ○ ● ○ ● ○ ○ ○

FKQ720-7 7 60×12 360 Side/ Back 18.5 80 120 21 31.5

FKQ 640-6 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ 640-5 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ 720-6 6 60×12 360 Side/ Back 18.5 80 120 21 31.5
FKQ 480-5 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ 640-6 6 40×16 320 Side/ Back 18.5 80 120 21 31.5
FKQ 480-4 ● ● ○ ○ ○ ● ○ ● × ○ ○
FKQ 640-5 5 40×16 320 Side/ Back 18.5 80 120 21 31.5
FKQ320-5 ● ● ○ ○ ○ ● ○ ● ○ ○ ○
FKQ 480-5 5 40×12 240 Side/ Back 18.5 80 120 21 31.5
FKQ320-4 ● ● ○ ○ ○ ● ○ ● × ○ ○
FKQ 480-4 4 40×12 240 Side/ Back 18.5 80 120 21 31.5 FKQ320-3 ● ● ○ ○ ○ ○ ○
● ○ ● ×
FKQ320-5 5 40×8 160 Side/ Back 15 60 120 21 31.5 FKQ240-3 ● ● ○ ○ ○ ● ○ ● × ○ ○
FKQ320-4 4 40×8 160 Side/ Back 15 60 120 21 31.5 FKQ200-4 ● ● ○ ○ ○ ● ○ ● × ○ ○
FKQ320-3 3 40×8 160 Side/ Back 15 60 120 21 31.5 FKQ160-3 ● ● ○ ○ ○ ● ○ ● × ○ ○

FKQ240-3 3 40×6 120 Side/ Back 15 60 120 21 31.5 FKQ150-2 ● ● ○ ○ ○ ● ○ ● × ○ ○

FK125-3 ● × ○ ○ ○ ● ○ × × ○ ○
FKQ200-4 4 25×8 100 Side/ Back 15 60 120 21 31.5
FK80-3 ● × ○ ○ ○ ● ○ × × ○ ○
FKQ160-3 3 40×4 80 Side/ Back 15 60 120 21 31.5
FK80-2 ● × ○ ○ ○ ● ○ × × ○ ○
FKQ150-2 2 50×3 75 Side/ Back 15 60 120 21 31.5
FK75-2 ● × ○ ○ ○ ● ○ × × ○ ○
FK125-3 3 25×5 62.5 Side/ Back 7.5/11 28 × 21 21
FK63-2 ● × ○ ○ ○ ● ○ × × ○ ○
FK80-3 3 40×2 40 Side/ Back 7.5 28 × 21 21 ● ○ ○
FK50-2 × ○ ○ ○ ● ○ × ×
FK80-2 2 40×2 40 Side/ Back 7.5 28 × 21 21 FK40-2 ● × ○ ○ ○ ● ○ × × ○ ○
FK75-2 2 25×3 62.5 Side/ Back 7.5 28 × 21 21 FK25-2 ● × ○ ○ ○ ● ○ × × ○ ○
FK63-2 2 63×1 31.5 Side/ Back 7.5 28 × 21 21 FK25-1 ● × ○ ○ ○ ● ○ × × ○ ○

FK50-2 2 25×2 25 Side/ Back 7.5 28 × 21 21 Note:

- Listed above are basic configurations of our products, where,“●”represents basic configuration and “○” optional
FK40-2 2 40×1 20 Side/ Back 7.5 28 × 21 21 - The optional configuration here doesn’t mean that it is available in any model, which should be discussed at time of contract conclusion
- Protection room width:2100mm for common room and 2300mm for room with thermal insulation
FK25-2 2 25×2 12.5 Side/ Back 7.5 28 × 21 21 - Listed above are basic configurations, but special design and manufacturing can be provided upon request
- The auxiliary driller’s console can be based on buttons or touch screen
FK25-1 1 25×2 12.5 Side/ Back 7.5 28 × 21 21 - Pneumatic pump is not available to FKDQ series liquid control equipment. The remote console must be provided with air supply interface for pneumatic control

13 www.shenkai.com 14