BOQ Online SS

EMD Details
EMD Details
EMD Value EMD Bank Details DD and / or Nos.
Required Required Required

Required Required Required
Minimum 1 rows entry required. You can create maximum 2 rows. Number of Rows To Add: Add Row
Action
Document Fees including GST
Furnish the following details
Document Fees including GST

Amount of Document Fee including GST Required Amount Enter Numeric Value
Mode of Payment Required Required
Demand Draft No Required
DD Date Required Date
Bank Details (Name, Branch & City) Required
ANNEXURE - 1
DETAILS OF THE FIRM
DETAILS OF THE FIRM

Sr. No Particular Bidder Details
. NAME OF THE FIRM: Required

A
1 Address of Registered Office Required
2 Contact Personal Required
3 Designation Required
4 Residential Address Required
5 Phone Nos. (Office and Residential) Required
6 Fax No. Required
7 Telegraphic code Required
B
1 Address of works Required
2 Contact Personal Required
3 Designation Required
4 Residential Address Required
5 Phone Nos. (Office and Residential) Required
6 Fax No. Required
7 Telegraphic code Required
ANNEXURE - 2
DETAILS OF THE EXPERIENCE FOR SUPPLY and ERECTION WORK IN LAST FIVE YEARS FROM THE DUE DATE OF TENDE
A GUJARAT Energy Transmission CorporationMinimum 1 rows entry required. Number of Rows T

Sr. No Name of TransmissionOrder reference no. aOrder value ( Rs.)
Required Required Required RequiredCurrencyEnter
B OTHER STATE ELECTRICITY BOARDS: Minimum 1 rows entry required. Number of Rows T
C PRIVATE FIRMS: Minimum 1 rows entry required. Number of Rows T


VE YEARS FROM THE DUE DATE OF TENDER:
1 rows entry required. Number of Rows To Add: Add Row

Length of line Date of completion Order fully executed Status if order under Action
Required Required Required Required



ANNEXURE – 3
LIST OF PERFORMANCE CERTIFICATES SUBMITTED WITH THE TECHNICAL BID
. Minimum 1 rows entry required. Number o

SR NO Name of the Authority by
Reference No. and Date Details of items

rows entry required. Number of Rows To Add: Add Row
Action
SCHEDULE – 3
FINANCIAL CAPABILITY
.
Name of the Bidder: Required
.
Sr. No. Details
Required Required
.
1. Solvency and Income Tax clearance.
2. A Scheduled Banker’s Certificate of present Solvency and last Income Tax certificate to be attached.
3. Annual turnover for last five years.
4. Price of the biggest job carried out.
Amount Rs In lacs
RequiredCurrencyEnter Positive ValueEnter Positive Value

zero
esent Solvency and last Income Tax certificate to be attached.

Minimum 1 rows entry required. Number of Rows To Add: Add Row
Remarks Action
Required
-6
CONFIRMATION OF DETAILS OF BIDDER
Sr. No
1
2
3
4
5 (a)
i) Registration Letter No. and date.

ii) Class of Registration
Iii) Validity
Sr. No
5 (c)
6 (a)
6 (b)
7 Whether following documents as specified are submitted.
a
b
c
d
e
f
g
h
i
j
Bidders are required to furnish following information specifying YES / NO
Particular YES / NO
Whether the Bid is on item rate basis as called for. Required

Whether rebate furnished is in percentage basis as called for. Required
Whether the Bid is submitted by RPAD/Speed Post. Required
Whether all pages of Bid Specifications are sealed and signed by the Bidder. Required
Whether the Bidder is registered with GETCO. Required
In case of “Yes”, please furnish following details:

Required
Required
Required
.
Particular Yes / No
Whether Bidder is having PF Code No. Required

Whether EMD paid. ( DD / BG ) Required
In case “Yes”, furnish details Required
s specified are submitted.
Human Resources detail. Required
Availability of tools, equipments etc. Required
Details of orders executed / on hand Required
Financial capability. Required
Experience as specified. Required
Latest Income-tax certificate Required
Companys Articles Of Association Required
Details Of Partners / Directors Required
B.R./P.A. Authorising Person Required
Power of Attorney of Consortium Members Required
ANNEXURE - X
Vendor must fill up below details and should place at the top of the Technical Bid.
1. PRICE : (FIRM ONLY PV applicable on Tower and Bolt-Nuts only) (Please specify YES / No.)
2. GST (In Percentage) Please quote GST No. and Date
3. PENALTY TERMS AGREE (Please specify YES / No.)
4. SECURITY TERMS AGREE (Please specify YES / No.)
5. P.B.G. TERMS AGREED (Wherever applicable) (P.B.G. – Performance Bank Guarantee)
6. PAYMENT TERMS AGREE (Please specify YES / No.)
7. Completion Period Agreed (Please specify YES / No.)
8. TELEPHONE NOS. and FAX NO.
9. AUTHORISED PERSON OF THE FIRM
10. NAME OF THE PROPRIETOR, , PARTNERS, DIRECTORS (AS THE CASE MAY BE), ALONG WITH ADDRESS, TELEPHONE, FAX NO.
11. If Vendor Registration is done (Please furnish the details of Vendor Registration No.)
A N N E X U R E -‘X’
Required
Required
Required
Required
Required
Required
Required
Required
Required
Required
Required
SCHEDULE – 16
.
I / WE, confirm that following documents are attached with the bid of the offer.
Sr.No. Details
1 Firm’s details as per “Annexure –1”

2 Certificate of Important Instruction and certificate-A
3 GETCO’s technical specification duly signed and with seal of firm.
4 Guaranteed Technical particulars submitted in GETCO’s Performa only.
5 ANNEXURE - ‘X’
NOTE: ALL THE DOCUMENTS SHOULD BE PROPERLY FILED AND SHOULD BE GIVEN FLAG MARKING FOR IDENTIFICAT
Confirmation Yes / No
Required
Required
Required
Required
Required
MARKING FOR IDENTIFICATION.
Bid Forms
S.NO Form Name Submission Type
1. Civil Part 1 Single
2. Supply Part 1 Single
3. Supply Part 1.2 Single
8. Erection Part 1 Single
9. Erection Part 1.2 Single
10 . Erection Part 1.3 Single
12 . Total Supply Part I Single
13 . Total Erection Part I Single
14 . Grand Summary of Package I Single
15 . Civil Part 2 Single
16 . Supply Part 2 Single
17 . Supply Part 2.2 Single
20 . Erection Part 2 Single
23 . Total Supply Part II Single
24 . Total Erection Part II Single
25 . Grand Summary of Package II Single
26 . Grand Total of Package I and Package II Single
Note: Suppliers are requested to fill up mandatory fields of forms to save data.
Indicates Bid Status is Filled
Indicates Bid Status is Partially Filled(Indicates only Document Status)
Indicates Bid Status is Not Filled
Form Requirement Form Status Document Status Action
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
Mandatory --
ms to save data.
Civil Schedule
Civil Section
Civil Part 1
Sr. No.
SAC code for
Sr.No identification only
1 Required
2 Required
3 Required
4 Required
- Required
- Required
- Required
- Required
- Required
- Required
- Required
- Required
- Required
- Required
- Required
- Required
- Required
- Required
- Required
- Required
5 Required
6 Required
- Required
- Required
- Required
- Required
7 Required
8 Required
- Required
- Required
- Required
9 Required
- Required
- Required
2 Required
3 Required
4 Required
10 Required
11 Required
- Required
- Required
- Required
- Required
- Required
- Required
12 Required
13 Required
14 Required
15 Required
16 Required
17 Required
18 Required
19 Required
20 Required
21 Required
22 Required
23 Required
24 Required
25 Required
SPECIAL NOTE: Billing break up for Buildings LUMPSUM(package) items shall be as under. (1)
SR.NO.:STAGE OF WORK : Percentage OF PAYMENT TO BE RELEASED
1.1 : Up to plinth level : 15 Percentage
1.2 : Up to GF lintel level : 5 PERCENTAGE
1.3 : Up to GF Slab level : 15 percentage
1.4 : Up to FF lintel level : 5 percentage
1.5 : Up to FF slab level : 10 Percentage
1.6 : Masonry up to FF slab level including parapet. : 15 percentage
1.7 : Plastering,Flooring, Door/Window,Painting , False ceiling etc : 20 Percentage
1.8 : Water supply and Drainage line : 5 percentage
1.9 : Completion of building in all respect (The amount will be paid within 60 days against commis
"SPECIAL NOTE: Billing break up for LUMPSUM(package) items shall be as under. (2) For all GI
SR.NO. : STAGE OF WORK : PERCENTAGE OF PAYMENT TO BE RELEASED
2.1 : Up to plinth level : 15 Percentage
2.2 : Up to GF lintel level : 15 Percentage
2.3 : Up to GF Slab level : 20 percentage
2.4 : Masonry up to FF slab level including parapet.: 15 percentage
2.5 : Plastering,Flooring, Door/Window,Painting , False ceiling etc : 20 percentage
2.6 : Water supply and Drainage line : 5 Percentage
2.7 : Completion of building in all respect (The amount will be paid within 60 days against commis
Description
Design and construction with supply of all required materials for following items as per relevant standards,
technical specifications,special conditions and tender drawings. Bidder shall submit the required design
calculation, drawing for execution for approval prior to execution.
GIS BUILDING fo 220 kv system including foundations for GIS and its all related items,ramp with platform,
case with railing, steel stair for accesing crane platform, cable trench with Hot dip galvanised ( Galvanizing
shall be as per releavant IS codes and specification)racks and trays, Glass partition ,flooring as per
Tech.specification,Door,window,Ventilator civil and strctural works for fixing EOT crane of approved capaci
etc including water supply, drainage as per latest relevant indian standards and as per requirement as dire
by GETCO( All the fixtures and items such as Bibcock,pillar cock, stop cocvk,wash basin,Eurpopeon
WC/Indian WC with all fixtures etc shall be of JAGUAR or equivalent approved company make), Glass
partition and flooring civil . Payment will be released progressively on achieving mile stones as per billing
break up given . (Note: Minimum carpet area and height of GIS building shown in Tender drawing as well in
Tender specifiaction alongwith tender GIS housing is given alongwith tender to spell out requirements and
enable bidders to quote.However, it is important that bidder shall study and include full requirements-
functional,operational and mainenance, safety and grid code etc which are essential and necessary for
building and installing 220 kv GIS as per standards in their bid.) GIS building consist of GIS hall, Room for
control and protection panels and AHU room. Room for control and protection panel and AHU room shall b
RCC framed structure..(Protection of RCC structure under ground and above ground against corrsion and
weather shall be provided as mentioned in Technical specification.The cement and steel shall also be
considered accordingly.).. The contractor shall submit performance guarantee of the waterproofing item of
100000.00 in the form of DD/BG of Schedule Bank / Nationalised Bank in favour of GETCO (A/c Agency) f
period of 5 years from actual date of completion of work on the stamp paper of Rs. 300.00 in approved form
of GETCO.Looking to the soil conditions, all Column/Column footing/strcture foundations shall be rested o
pile foundation only Please note that monimum depth of foundation shall be as under (1) For pile foundatio
2000mm cutoff level The mimimum Grade of concrete shall be M30.Dimension of GIS building shall be as
mentioned in Tender drawing, Technial specifiction and relevant IS codes and standards.However,Item Ra
and Scope of work shall be inclusive of all the works/items mentioned in Tender drawing, BOQ description,
Technical specification and requirement to complete the work as per relevant IS codes and standards
enable bidders to quote.However, it is important that bidder shall study and include full requirements-
building and installing 220 kv GIS as per standards in their bid.). GIS building consist of GIS hall, Room for
control and protection panels and AHU room. Room for control and protection panel and AHU room shall b
RCC framed structure..(Protection of RCC structure under ground and above ground against corrsion and
weather shall be provided as mentioned in Technical specification.The cement and steel shall also be
considered accordingly.).. The contractor shall submit performance guarantee of the waterproofing item of
100000.00 in the form of DD/BG of Schedule Bank / Nationalised Bank in favour of GETCO (A/c Agency) f
period of 5 years from actual date of completion of work on the stamp paper of Rs. 300.00 in approved form
of GETCO.Looking to the soil conditions, all Column/Column footing/strcture foundations shall be rested o
pile foundation only. Please note that monimum depth of foundation shall be as under (1) For pile foundatio
2000mm cutoff level The mimimum Grade of concrete shall be M30.Dimension of GIS building shall be as
mentioned in Tender drawing, Technial specifiction and relevant IS codes and standards.However,Item Ra
and Scope of work shall be inclusive of all the works/items mentioned in Tender drawing, BOQ description,
IMPORTANT NOTE: (1)Soil data has been provided in bid for reference only.Bidder shall take soil investig
at their own cost and design the civil buildings and foundations for other strcture accordingly as per
specification and requirement.GETCO shall pay as per quoted LUMPSUM price only.
CONTROL ROOM CUM ADMINISTRATIVE BUILDING for 220/66kV sub station including foundations and
all related required items,ramp with platform, stair case with railing, RCC cable trench with Hot dip galvanis
Galvanizing shall be as per releavant IS codes and specification) racks and tray ,vertical tray etc as per
requirement, Glass partition ,flooring as per Technical specification,door,window,ventilator etc including wa
supply, drainage inside building as per latest relevant standards and codes and as per requirement( All the
fixtures and items such as Bibcock,pillar cock, stop cocvk,wash basin,Eurpopeon WC/Indian WC with all
fixtures etc shall be of JAGUAR or equivalent approved company make) etc(GF+FF WITH TERRACE CAB
as per latest relevant standards. Payment will be released progressively on achieving mile stones as per b
break up given . (Note: Minimum carpet area shown in Tender drawing as well in Tender specifiaction
alongwith tender to spell out requirements and enable bidders to quote.However, it is important that bidder
shall study and include full requirements- functional,operational and mainenance and safety etc which are
essential and necessary for control room and administrative building as per standards and grid codes in th
bid.) CONTROL ROOM CUM ADMINISTRATIVE BUILDING shall be RCC framed structure.(Protection of
structure under ground and above ground against corrsion and weather shall be provided as mentioned in
Technical specification. The cement and steel shall also be considered accordingly.).) The contractor shall
submit performance guarantee of the waterproofing item of Rs. 43000.00 in the form of FDR of Schedule B
/ Nationalised Bank in favour of GETCO (A/c Agency) for a period of 5 years from actual date of completion
work and on stamp paper of Rs.300.00 in approved format of GETCO.The mimimum Grade of concrete sh
be M30.CONTROL ROOM CUM ADMINISTRATIVE BUILDING SHALL BE RCC FRAMED
STRCTURE.Looking to the soil conditions, all Column/Column footing/strcture foundations shall be rested
pile foundation only. Please note that monimum depth of foundation shall be as under (1) For pile foundatio
2000mm cutoff level However,Item Rate and Scope of work shall be inclusive of all the works/items mentio
in Tender drawing, BOQ description, Technical specification and requirement to complete the work as per
relevant IS codes and standards.
Providing and laying RCC FOUNDATIONS FOR SUPPORT STRUCTURES FOR FOLLOWING
EQUIPMENT/TOWER GANTRY/TRANSFORMER/REACTOR etc of minimum grade M-30 for exposed wo
including the cost of excavation in all sorts of soil/rock/RCC, back filling with non cohesive soil/sand,lean
concrete, necessary formwork ( ply wood shuttering form work and adjustable tubular steel supports),
scaffolding in true line and level, pouring and compacting with machine vibrator,Providing and fixing founda
bolt with templete, grouting of foundation bolts with GP-2 or equivalent high strength non-shrink type mate
curing with jute bags on RCC surface etc. complete Including cost of reinforcement.(CRS). (Protection of R
structure under ground and above ground against corrsion and weather shall be provided as mentioned in
Technical specification.The cement and steel shall also be considered accordingly.)..Grade of concrete for
and pile cap shall be M30 Looking to the soil conditions, all Column/Column footing/strcture foundations sh
be rested on pile foundation only. Please note that minimum depth of foundation shall be as under (1) For
foundation -- 2000mm cutoff level for Tower Gantry foundation and1000mm cutoff level for Equipment supp
strcture foundation. However, Item Rate and Scope of work shall be inclusive of all the works/items mentio
in Tender drawing,BOQ description, cost of Foundation bolt as per approved drawing , cost of Rail pieces f
Transformer and rail cum road work,Technical specification and requirement to complete the work as per
relevant IS codes and standards A. FOR 220KV LA/HLA
B-FOR 220KV BPI/HBPI

C-FOR 220KV SF6-AIR.BUSHING
D-FOR 220KV CT(M)
E-FOR 220KV PT(M)
F-FOR SUPPORT STRUCTURE OF 220KV GIS BUS DUCT
G-FOR 220KV ONE TIER GANTRY COLUMN(2GT1) - COMBINED FOOTING SUPPORTED BY PILE
H-FOR 66KV BPI/HBPI
I-FOR 33KV LA
J-33KV SG6 TO AIR BUSHING
K-FOR SUPPORT STRUCTURE OF 33KV GIS BUS DUCT
L-FOR TRANSFORMER OF 220/33KV(160MVA/150MVA) INCLUDING RADIATORBANK AND OTHER

FOUNDATIONS AND ITS MARSHALLING WORK AND ITS TRACK UPTO ROAD INCLUDING REQUIRE
RAIL PIECES.The rate includes design and construction of oil soak pit of required capacity surrounding
Transformer of required capacity as per relevant standards and codes and design of rail cum road. Tender
drawing is attached herewith for ready reference.( Construction of Transformer foundation shall be cast in
stage as under.(1) Main plinth( minimum size shall be 6500 mm(L) x 4000mm(B) ) for transformer shall be
in first stage as per the data given by GETCO as tentative but on higher side loading from available data o
manufacturer of 160 mva transformer . (2) foundations for acessories other than main plinth alongwith
surrounding oil soak pit and rail cum road shall be cast in 2nd stage as per GA drawing of manufacturer of
actual alloted transformer by GETCO.) It is important that bidder shall study and include full requirements-
TRANSFORMER as per standards in their bid.However,Item Rate and Scope of work shall be inclusive of
the works/items mentioned in Tender drawing, BOQ description, Technical specification and requirement to
complete the work as per relevant IS codes and standards
M-FOR LIGHTENING MAST OF REQUIRED HEIGHT( AS PER REQUIREMENT OF DESIGN CALCULAT

AND APPROVED LAY OUT)
N-FOR 500 KVA TRANSFOREMER INCLUDING REQUIRED RAIL PIECES(11KV/440V)
O-FOR TRANSFORMER OF 66/11KV (5 MVA) INCLUDING RADIATORBANK AND OTHER FOUNDATIO

AND ITS MARSHALLING WORK AND ITS TRACK UPTO ROAD INCLUDING REQUIRED RAIL PIECES.
rate includes design and construction of oil soak pit of required capacity for Transformer as per relevant
standards and codes. It is important that bidder shall study and include full requirements-
TRANSFORMER as per standards in their bid However,Item Rate and Scope of work shall be inclusive of
the works/items mentioned in Tender drawing/BOQ description, Technical specification and requirement to
complete the work as per relevant IS codes and standards.
P-D.G.SET 250 KVA ( RCC WITH MINIMUM 1500MM DEPTH INSIDE GROUND LEVEL)
Q-22/11 KV LA/CT/CB/ISO/DOUBLE POLE STRCTURE/CABLE TERMINTION

STRCTURE/BPI/HBPI/TRIPPLE POLE STRUCTURE/LTPB AS PER APPROVED ELECTRICAL LAY OUT
RCC OIL SUMP having net storage capacity of Minimum 50000 LITRE as per attached Tender Drawing.
Appropriate diameter of C class piping with required fixtures,masonry chambers etc and other required
arrangement as per latest relevant IS codes and standards.Rate is inclusive of all items required for
completion of Job for full functioning of transportation of oil from tramsformer to oil sump (in case of fire of
transformer) such as pipe line required from transformer plinth to oil sump, inspection chamber,valves of
approved quality,diameter and make etc and as per relvant standards and codes and CEA requirements.
(Protection of RCC structure under ground and above ground against corrsion and weather shall be provid
as mentioned in Technical specification.The cement and steel shall also be considered accordingly.).Lookin
the soil conditions, Oil sump shall be rested on pile foundation.The mimimum Grade of concrete shall be
M30.However,Item Rate and Scope of work shall be inclusive of all the works/items mentioned in Tender
drawing, BOQ description, Technical specification and requirement to complete the work as per relevant IS
codes and standards
RCC CABLE TRENCHES/BIG BEN CROSSING with Supply and Erection of Galvenized Rack and Ladd
Type Cable Trays of required width and Accessories as per respective Technical Specifications and relev
special conditions.Cable trench cover shall be prestressed cover of required thickness.(Minimum thicknes
the prestressed cover shall be 50mm). The mimimum Grade of concrete shall be M30 . No seperate paym
shall be made for making base if any. Protection of RCC structure under ground and above ground again
corrsion and weather shall be provided as mentioned in Technical specification.The cement and steel sh
also be considered accordingly.). However,Item Rate and Scope of work shall be inclusive of all the
works/items mentioned in Tender drawing, BOQ description, Technical specification and requirement to
complete the work as per relevant IS codes and standards.RCC Cable trench shall be supported on pil
foundation only. Payment shall be made on RMT basis for Item no A,B , C and D and on Sq.Meter basis
item no. E. A- ONE TIER CABLE TRENCH (MINIMUM INNER SIZE SHALL BE 300 MM X 450 MM)
B-TWO TIER CABLE TRENCH ( MINIMUM INNER SIZE SHALL BE 1000 MM X 800 MM)
C-THREE TIER CABLE TRENCH ( MINIMUM INNER SIZE SHALL BE 1000 MM X 1000MM)
D- CABLE TRENCH FOR XLPE POWER CABLE - For 33KV 3C X 500 SQ. mm XLPE Power Cable. Inn
size of cable trench ( Width x Depth) including no of Tier shall be decided during detailed Engineering
(Seperate cable trench section for each BLOCK -A1,A2, A3 and A4 . Section of each cable trench shall
suitable for Minimum 15 cables of 33KV 3C X 500 SQ. mm XLPE Power Cable ) on the basis of relevant
Codes and standards and requirement of GPCL. .Work shall be executed as per approved Electrical lay o
CABLE TRENCH AT ROAD CROSSING HAVING CAPACITY TO TAKE LOAD OF MINIMUM 400KV( 500
MVA) TRANSFORMER WITH TRAILOR
RCC FIRE PROTECTION WALL in all respect with latest relavant STANDARDS and CODES and as per
requirement of transformer/Reactor safety Looking to the soil conditions, all Column/Column footing/strctur
foundations shall be rested on pile foundation only. Minimum depth of foundation inside ground level shall
as under. (2) For pile foundation -- 2000mm cutoff level The mimimum Grade of concrete shall be M30
(Protection of RCC structure under ground and above ground against corrsion and weather shall be provid
as mentioned in Technical specification.The cement and steel shall also be considered accordingly.).
However,Item Rate and Scope of work shall be inclusive of all the works/items mentioned in Tender drawin
BOQ description, Technical specification and requirement to complete the work as per relevant IS codes a
standards FOR 220/66/33KV TRANSFORMER
RCC Roads supprted by WBM road( WBM road having Minimum750mm thickness shall consist of GSB la
and WMM layer as per MORT and H specification( minimum thickness of GSB layer shall be 450mm thick
which may be increased as per design requiremnt and minimum thickness of WMM layer shall be 300mm
which may increse as per design requirement ) , Minimum thickness of RCC road shall be 300mm. C.D Wo
Paving and Storm water Drains in all respect shall be provided as per latest relevant STANDARDS.Design
WBM road shall be done as per CBR value and other soil data. Yellow earth required for embankment ( oth
than GSB layer ,WMM layer,bitumnous carpets etc) shall be paid seperately as per actual required on
site.Design of RCC road with WBM road road shall be done as per CBR value, IRC standard, relevant
specifications/standards/BOQ description and other soil data.Payment shall be paid as per actual executio
Width of road from shoulder to shoulder shall be considered for payment However,Item Rate and Scope of
work shall be inclusive of all the works/items mentioned in Tender drawing, BOQ description, Technical
specification and requirement to complete the work as per relevant IS codes and standards A-RCC ROAD
3.0/4.50/6.0/7.0 METER WIDE WITH FANNING REQUIRED FOR TURNING OF 500MVA TRANSFOREM
WITH TRAILER AT JUNCTION with minimum loading of 500MVA transformer with trailer.Width of road sha
as per approved electrical lay out.
B-RCC ROAD SIDE DRAIN( MINIMUM CLEAR DIMENSION OF 750MM WIDTH and 600MM DEPTH
C- RCC CROSS DRAINAGE WORK.with minimum loading of 500mva transformer with trailer
D-RCC PERIPHERAL DRAIN ( MINIMU INNER CLEAR DIMENTION SHALL BE 1000 WIDTH X 600MM
DEPTH )
External Water Supply System (U/G + OH tank) including necessary fixtures,fastenings,valves etc. AS PER
RELEVANT STANDARDS AND CODES. A-Providing and installing readymade white color three layered P
water tight storage tank made from linear low density polyethylene and low density polyethylene LDPF pro
confirming to I.S: 10146/1982 with cover including providing and fixing one 20mm.dia. float valve ball cock
,one 20mm.dia. G.I. Waste pipe with plug one 25mm.dia.G.I.Over flow pipe of length up to 0.30 Mt. includin
making all connection for inlet/outlet supply with necessary fittings for outlet/ inlet etc., complete as directe
E.I.C.1500 litre capacity
B-Providing and Erecting in position UNDERGROUND R.C.C. Water tank in M30 having 250mm. thick bot
slab, 170mm thick top slab and side walls 250mm. thick with clear inner dimension of 5000 X 3000 X2500m
shuttering finishing outer exposed faces with 12mm. thick cement plaster in C.M.(1:3)and inner surfaces w
12mm. thick with water proof in C.M.(1:3) using water proofing compound, one 600 X 600mm. CI manhole
cover(Heavy duty) with one over flow pipe and hole for inlet pipe giving leak proof test etc., completed as
directed by E.I.C. The Rate is inclusive of making connection for inlet/outlet supply with necessary fittings f
outlet/inlet, submersible monoblock of required capacity( For lifting water from under ground tank to terrace
control room building.Minimum 2.0 HP pump shall be used) with eletrical fiitings including censors at terrac
tank and underground tank, wires,PVC water stopper and all items required to complete the work in all
respect. Looking to the soil conditions, Oil sump shall be rested on pile foundation.Tender drawing is attach
for reference purpose.However,Item Rate and Scope of work shall be inclusive of all the works/items
mentioned in Tender drawing, BOQ description, Technical specification and requirement to complete the w
as per relevant IS codes and standards
C-PIPING REQD FOR ABOVE WORK OF VARYING DIAMETER( Water supply line inside the buildings is
the scope of their individual items. This item includes pipe line from water source to O.H. Tank / terrace tan
each building and water line reuired in switch yard area). Qty considered is on approximate basis. Howeve
payment shall be made as per actual execution of work. Providing laying and joining in true line and level
UPVC pipe (SCH-40) including fittings of PRINCE/ SUPRIME/ ASTRAL/ FINOLEX or equivelent make or a
approved by EIC.Pipe shall be fixed on the wall with the help of clamp at every 2000mm c/c or shall be
concilled or necessary excavation in trenches as directed including necessary fittings including testing of p
and joints and fixing the same with adhesive solvant,including cost of all materials and necessary refilling t
trenches,dressing etc complete. 1- u Pvc pipe of 40mm dia
u Pvc pipe of 25mm dia

Providing, supplying, fabricating and erecting chain link fencing WITH GATE as shown in approved electric
lay out and as per instruction of EIC. The item rate includes necessary excavation and foundation of minim
grade of M30, chainlink fencing panel, supporting angle post, erection and cost of all
materials,labours,bolts,nuts,chainlink fencing, Barbed wire fencing etc. The detaied description of chainlink
fencing panel and supporting angle is as under. CHAIN LINK FENCING PANEL: Chainlink fencing panel o
size 2400 X 200Omm. made from 75X75mm and 10 Gauge G.I. Chainlinks and50X50X6mm. angle includ
fixing the chainlink in angle frame by means of 40X3mm. M.S. Flat welded to angle frame drilling to holes i
angle frame and flat and fixing the same with angle post in line level and plumb by means of 10mm. dia. bo
frame and flat and nuts, etc., completed as per drawing and as directed by E.I.C. .. CHAINLINK FENCING
ANGLE: Chain link fencing angle of size 50X50X6mm. M.S. Angle for vertical support 3.35Mt. long includin
providing and 50X6mm. M.S. Flat/pieces, 150mm. long welded at top and bottom of support with 18mm. d
slotted holes in flats, cutting and bending angle at 45 degree as required at top with 3 nos. of 6mm.dia. hol
for fixing barbed wire at top as per drawing and as directed by E.I.C. Grouting the same in pillar in line and
level etc., complete. Rate is inclusive of BB masonry below chainlink fencing upto depth depending on soil
conditions. Payment shall be made in RMT basis.( ALL THE MS STRUCTURE SHALL BE HOT DIP
GALVANIZED)Looking to the soil conditions, angle support foundations shall be supported on
pile.However,Item Rate and Scope of work shall be inclusive of all the works/items mentioned in Tender
drawing, BOQ description, Technical specification and requirement to complete the work as per relevant IS
codes and standards
Septic Tank with Soak Pit and complete drainage system including inspection chamber AS PER CODES A
RELEVANT STANDARDS. The minimim Grade of concrete shall be M30 However, Scope of work shall be
inclusive of all the works/items mentioned in Tender drawing/BOQ description, Technical specification and
requirement to complete the work as per relevant IS codes and standards, A-RCC SEPTIC TANK ON THE
BASIS OF ATTACHED TENDER DRAWING.However,Item Rate and Scope of work shall be inclusive of al
works/items mentioned in Tender drawing, BOQ description, Technical specification and requirement to
B-Providing 3000mm. internal diameter and 4.0 Mt. deep soak pit including excavation in all types of soil a
soft rock and B.B.C.C. (1:4:8) bedding 300mm. thick below masonry and 450mm. thickBrick Masonry in C.
(1:6) up to 1500mm. height, 350mm. thick for further 1500mm. and 230mm.thick for remaining height hone
combed, plastering in C.M.(1:3) outside up to 1.5 Mt. height and 100mm. thick R.C.C. Slab with 600X600m
C.I .HEAVY cover with frame, with necessary reinforcement as per design and C.I. Vent pipe 1800mm.long
with Bella Masonry pillar 350X350X450 plastered all around filling 40 to 50mm. size brick bats up to 1.5 M
depth, including 16mm. dia. M.S. U stages steps refilling including disposal of the surplus excavated earth
to the lead of 300mt radius including 3 coats of white or colours wash to all exposed finished surface etc.
complete as directed as directed by E.I.C.Rate is inclusive of modifying the design if required as per soil
condition which is to be approved by GETCO.However,Item Rate and Scope of work shall be inclusive of a
the works/items mentioned in Tender drawing, BOQ description, Technical specification and requirement to
C-Providing and laying A class RCC Hume pipe of 300 mm dia. including necessary excavation, refilling
trenches, laying 150 mm thick B.B.C.C 1:4 below joints and upto half the height of joints making water tig
joints in C.M. 1:1 curing etc. comp. Qty considered is on approximate basis. However payment shall be m
as per actual execution of work.Design and lay out of drain to be apporved by GETCO.
D-Providing and laying A class RCC Hume pipe of 150 mm dia. including necessary excavation, refilling
trenches, laying 150 mm thick B.B.C.C 1:4 below joints and upto half the height of joints making water tig
joints in C.M. 1:1 curing etc. comp.Qty considered is on approximate basis. However payment shall be m
as per actual execution of work.Design and lay out of drain to be apporved by GETCO.
E-Providing and laying 150mm internal diameter (to level or slopes) and jointing with stiff mixture of cemen
mortar in proportion 1:1 approved quality salt glazed stoneware pipes including testing of pipes and joints
complete. Qty considered is on approximate basis. However payment shall be made as per actual executio
work.Design and lay out of drain to be apporved by GETCO.
F-Providing and laying 100mm internal diameter (to level or slopes) and jointing with stiff mixture of cemen
mortar in proportion 1:1 approved quality salt glazed stoneware pipes including testing of pipes and joints
complete. Qty considered is on approximate basis. However payment shall be made as per actual executio
work.Design and lay out of drain to be apporved by GETCO.
G-Constructing masonary for under ground C.I. Inspection chamber and bends with bricks/blocks having
crushing strength not less then 35mkg//cm 2 in Cm 1:5 C.I. cover with frame light duty 455 mm x 610 mm
internal dimension total weight of cover with frame to be not less then 38 Kg(wt. Of cover 23 Kg and wt of
frame 15 Kg) RCC top slab with 1:2:4 mix (1 cement: 2 coarse sand:4 grade stone aggregate 20mm size)
foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth a floating co
neat cement on walls and bed concrete etc. complete Inside dimension 455mmx610mm
Supplying and spreading Round up(Glyphosphate 41PERCENTAGE SL) of approved ISI standard make o
equivalent weedicide for weed control in proportion of 100ml weedicide and 250 gram ammonium sulphate
,mixing with sticking agent mixed with 10 litre of clean fresh water and second spray with same treatment a
stated above after two months and as per manufacturers specification and as directed by Engineer-in char
However, Scope of work shall be inclusive of all the works/items mentioned in Tender drawing/BOQ
description, Technical specification and requirement to complete the work as per relevant IS codes and
standards. Qty considered is on approximate basis. However payment shall be made as per actual execut
of work as per approved Electrical lay out by GETCO
Supply and Spreading black trap stone machine crushed kapchi metal 25 to 40 mm. size metal in yard in
100mm layer with 100mm thick river sand underneath including royalty, all Government taxes transportatio
etc., complete as directed by E.I.C. The Scope of work includes the area grading work for maintaining requ
slope for metal spreading, compaction of earth etc However, Scope of work shall be inclusive of all the
works/items mentioned in Tender drawing/BOQ description, Technical specification and requirement to
complete the work as per relevant IS codes and standards Qty considered is on approximate basis. Howev
payment shall be made as per actual execution of work as per approved Electrical lay out by GETCO
Tree Plantation in the sub station to the entire satisfaction of GETCO. This item includes Providing plantati
and development of plants /trees /flowers, ornamental plants,Lawns(Dub grass) and garden shrubs,small t
of plants of selected and approval name, quality,size and growth in good condition. The work including cos
plants,materials,digging pit in the soil of size 0.60 x 0.60 meter. Soil for planting trees,mixing of manure an
refilling the pit with good earth, watering as and when required.Providing pestisides/fertilizer with maintena
upto commission of sub station, labours,tools, and tackles, transportation, loading, unloading etc complete
(approx. 1000 trees/plants and lawn of 1000 Sq.meter).The scope of work shall be as per area shown in
tender drawing of Electrical lay out.Design of land scapping and trees/plants etc shall be made in consulta
with experienced Hotriculturist.( Total area =393 METER X 204 METER ). The lay out of area where tree
plantation is to be provided shall be decided at the time of detailed engineering.However, Scope of work sh
be inclusive of all the works/items mentioned in Tender drawing/BOQ description, Technical specification a
requirement to complete the work as per relevant IS codes and standards
Vehicle parking sheds(Approx. size shall be 15.0x 5.0 meter) of steel tubular structure with PVC fire resista
roof as per latest relevant STANDARDS. Finolex of equivalent make corrugated sheet fire resistance Roo
fixed with required quality nut / washer complete, including plates, multiwall corrugated sheet of required
including filling in gaps with silicon etc complete. Looking to the soil conditions, all Column/Column
footing/strcture foundations shall be rested on pile foundation only. The Grade of concrete shall be M30
However, Scope of work shall be inclusive of all the works/items mentioned in Tender drawing/BOQ
description, Technical specification and requirement to complete the work as per relevant IS codes and
standards
TYPE.4 RESIDENTIAL QUARTER (TWIN TYPE) for 400kv sub station including foundations and its all rel
required items, stair case etc(GF+FF+ WITH TERRRACE CABIN) including water supply, drainage as per
latest relevant standards.Architect drawing shall be provided by GETCO.However, construction drawing sh
be developed by bidder.Payment will be released as per billing break up given. (Note: Architect drawing
showing the dimension of room and othe details is given by GETCO and other details mentioned in Tender
specifiaction are given alongwith tender to spell out requirements and enable bidders to quote.However, it
important that bidder shall study and include full requirements as per relevant standards and codes.TYPE.
QUARTER BUILDING shall be a RCC framed structure.The Grade of concrete shall be M30 Protection of
RCC structure under ground and above ground against corrsion and weather shall be provided as mention
in Technical specification.The cement and steel shall also be considered accordingly)Looking to the soil
conditions, all Column/Column footing/strcture foundations shall be rested on pile foundation only. Please
that monimum depth of foundation shall be as under (1) For pile foundation -- 2000mm cutoff level Howeve
Scope of work shall be inclusive of all the works/items mentioned in Tender drawing/BOQ description,
given. (Note: Architect drawing showing the dimension of room and othe details is given by GETCO and ot
details mentioned in Tender specifiaction are given alongwith tender to spell out requirements and enable
bidders to quote.However, it is important that bidder shall study and include full requirements as per releva
standards and codes. STORE BUILDING shall be a RCC framed structure. (Protection of RCC structure u
ground and above ground against corrsion and weather due to lying in saline atmosphere/marine environm
conditions shall be provided with Epoxy painting / coating of FOSROC or Equivalent company product.) Th
contractor shall submit performance guarantee for water proofing item of Rs.20000.00 in the form of FDR o
Schedule Bank / Nationalised Bank in favour of GETCO (A/c Agency) for a period of 5 years from actual da
of completion of work and on the stamp paper of Rs.100.00 in approved format of GETCO. The Grade of
concrete shall be M30 Rate is inclusive of Design, Engineering, supply, construction and installation of EO
overhead crane of 3.0 M.T. capacity of approved make in store building and its related civil works Looking
the soil conditions, all foundations shall be rested on pile foundation only. Please note that monimum depth
foundation shall be as under (1) For pile foundation -- 2000mm cutoff level However, Scope of work shall b
inclusive of all the works/items mentioned in Tender drawing/BOQ description, Technical specification and
requirement to complete the work as per relevant IS codes and standards
Toilet block system for Labors including foundations and its all related required items,ramp with platform as
latest relevant standards. (Note: Tentative arrangment of toilet block to be provided is shown in tender draw
given alongwith tender to spell out requirements and enable bidders to quote.However, it is important that
bidder shall study and include full requirements- functional,operational and mainenance, safety and nation
codes etc which are essential and necessary for building as per standards in their bid.).Please note that ra
inclusive of dismantling complete toilet block after commissioning of sub station and written instruction of
Engg. incharge.All usable items shall be credited in GETCO store under Surendranagar Tr. circle office.Us
items shall be decided by concern EE(const)/EE(civil). PAYMENT SHALL BE RELEASED ONLY AFTER
SATISFACTORY COMPLETION OF WORK IN ALL RESPECT. The Grade of concrete shall be M30 Howe
Scope of work shall be inclusive of all the works/items mentioned in Tender drawing/BOQ description,
Stacking Platform (size shall be 30.3x 10.35 meter) of R.C.C. frame structure as per attached tender draw
and technical specification including foundations and its all related required items,ramp with platform, as
latest relevant standards and loading given by GETCO. (Note: Tentative arrangment of stacking platform t
provided is shown in tender drawing given alongwith tender to spell out requirements and enable bidders
quote.However, it is important that bidder shall study and include full requirements- functional,operational
mainenance, safety and national codes etc which are essential and necessary as per standards in their b
The Grade of concree shall be M30 Looking to the soil conditions, all Column/Column footing/strcture
foundations shall be rested on pile foundation only. However, Scope of work shall be inclusive of all the
works/items mentioned in Tender drawing/BOQ description, Technical specification and requirement to
SECURITY CABIN for400kv sub station including foundations and its all related required items,,including w
supply, drainage as per latest relevant standards.Architect drawing shall be provided by GETCO. However
construction drawing shall be developed by bidder.Payment will be released progressively on achieving mi
stones as per billing break up given (Note: Architect drawing showing the dimension of room and othe deta
is given by GETCO and other details are mentioned in Tender specifiaction are given alongwith tender to s
out requirements and enable bidders to quote.However, it is important that bidder shall study and include f
requirements as per relevant standards and codes. SECURITY CABIN shall be a RCC framed structure.
Protection of RCC structure under ground and above ground against corrsion and weather shall be provide
as mentioned in Technical specification.The cement and steel shall also be considered accordingly.) Lookin
the soil conditions, all Column/Column footing/strcture foundations shall be rested on pile foundation only.
minimum grade of concrete shall be M30 Please note that monimum depth of foundation shall be as under
For pile foundation -- 20000mm cutoff level However, Scope of work shall be inclusive of all the works/item
mentioned in Tender drawing, Technical specification and requirement to complete the work as per relevan
codes and standards.
investigation agencys report and recommendation.Scope of work shall be as mentioned in detailed
specification and tender drawing (Note: Tender drawing is given by GETCO and other details mentioned in
Tender specifiaction are given alongwith tender to spell out requirements and enable bidders to
quote.However, it is important that bidder shall study and include full requirements, terrain of site etc and a
per relevant standards and codes.Compound wall shall be of RCC column and Beam and gap shall be fille
with Brick/Block masonry and Retaining wall shall be of RCC. Height of compound wall shall be 2.0 meter
Finished Ground level Plus concertina coil. The Item rate is inclusive of cost of fabrication work , excavatio
masonry, hodfast, , all type of concrete(RCC column,Beams,Retaining wall ), reinforcement, 20mm thick
plaster work, M.S. Grill( To be provided at every span)),concertina coil,painting ( as mentioned in Technica
specification) to compound wall ,coping, fixing etc as shown in drawing.(Protection of RCC structure under
ground and above ground against corrsion and weather shall be provided as mentioned in Technical
specification.The cement and steel shall also be considered accordingly) Looking to the soil conditions, all
Column/Column footing/strcture foundations shall be rested on pile foundation only. The Grade of concrete
shall be M30.However, Scope of work shall be as mentioned in detailed specification,Tender drawing and a
per relvant standards and codes.
bars at 200 mm C/C alternatively (i.e.One between two pipes) vertically welded to 40 mm dia pipe frame a
per drawing and design with necessary brackets,hold fasts,locking arrangement on top and aldrop on both
side including base rail for sliding the gate having ball bearing rollers and guide tracks of 50x6mm M.S. fla
with hold fast, fabrication of side supports including fixing GETCO letter on front side etc.comp.With three
coats of approved Acid/Alkali resistant painting and one coat of red oxide primer on all steel strcture as
directed by EIC. The rate is inclusive of cost of fabrication work , excavation, masonry, hodfast, box type he
duty hinges, box type heavy duty rollers, rail track of required size with grouting , all type of concrete(RCC
column,Beams ), reinforcement, channel to be embeded in RCC column for fixing of hinges of shutters( To
nos of channel), heavy duty pvc conduite pipe to be embeded in column for lamp post, cost of decorative l
post/dom, electrification work for Dom work as well as for complete centrally operating system, plaster wor
painting to gate and wall, fixing GETCO letter as shown in drawing, concrete coping etc. Scope of work sh
be as mentioned in Technical specification and tender drawing. The Grade of concrete shall be M30 (Note:
Tender drawing is given by GETCO and other details mentioned in Tender specifiaction and tender drawing
are given alongwith tender to spell out requirements and enable bidders to quote.However, it is important t
bidder shall study and include full requirements, terrain of site etc and as per relevant standards and codes
help of TOTAL STATION) prior to start the filling work and final level after completion of work in presence o
GETCO representative and payment shall be made as per actual contour/Level and FGL decided. (Please
note that, quantity of YELLOW EARTH filling in yard is tentative. (Quantity of YELLOW EARTH filing in yar
Total qty. of YELLOW EARTH filing as per contour - Qty. of cutting earth (as executed in item no.26) - Qty.
surplus excavated earth from executed foundations of buildings/switch yard foundations/cable trench etc.
under scope of bidder.Area of Earth filling shall be considered as per actual.( Deduction for all
buildings,strctures etc shall be done while calculating payable area) Fill material imported for raising subgr
level shall consist of YELLOW EARTH ( cohesive non swelling granular material). Suitability should be
determined by the testing. In general materials for filling shall not contain rocks or hard lumps greater than
mm in maximum dimension and should have at least 80 percent passing the 9.5mm sieve and at least 5
percent passing the 0.075 mm sieve. The fill materials should be free of organics, debris, or other deleterio
materials. Any imported materials shall have water-soluble sulfate and chloride contents that are less than
1000 parts per million and 500 parts per million, respectively, pH greater than 7.0 and Expansion Index les
than 20.
Earth cutting in any sorts of soil/soft rock/hard Rock including breaking rock in required size preparing th
surface , cutting with all required lead and lift, consolidating spreaded soil and rolling of filled earth work in
mm thick layers at OMC.to required dry density with power roller 8 to 10 tones including filling in depressi
which occur during the process, and stacking or utilizing the cutting stuff in S/S area as directed by EIC
throwing away the extra stuff out side s/s premises as directed by EIC . Only cutting measurement will be
Note: (1) Bidder has to take initial level in the grid of 5.0-meter x 5.0 meter (with the help of TOTAL STATIO
prior to start the cutting work and final level after completion of work in presence of GETCO representative
payment shall be made as per actual contour/Level and FGL decided.
Asphalt Roads(consists of 50mm minimum thick bituminous carpet, 20mm minimum thick Bitumionous s
coat and liquid seal coat on top of road) supprted by WBM road( minimum thickness of GSB layer shall
450mm thick but which may be increased as per design requiremnt and minimum thickness of WMM lay
shall be 300mm which may increse as per design requirement ), C.D Works, Paving and Storm water Drai
all respect as per latest relevant STANDARDS.Design of Section of Asphalt road with WBM road road sha
done as per CBR value, IRC standard, relevant specifications/standards and other soil data. Yellow ear
required for embankment ( other than GSB layer ,WMM layer,bitumnous carpets etc) shall be paid sepera
as per actual required on site. Design and construction of asphalt road shall be done as per MORT and H
Latest Revision and other IS codes and standards.However, Scope of work shall be as mentioned in deta
specification,Tender drawing, RCC Toe wall, stone pitching with pointing and as per relevant standards a
codes.All materials and constrcuction shall be in accordance with Technical specification of IRC item
desciption and Specification of MORT and H unless otherwise specified. A-Asphalt road (Bituminous roa
15.0 METER WIDE ( 0.50 meter shoulder width + 6.0 meter carriage width + width of divider + 6.0 mete
carriage width + 0.50 meter shoulder width) WITH FANNING REQUIRED FOR TURNING OF 500MVA
TRANSFOREMR WITH TRAILER AT JUNCTION with minimum loading of 500MVA transformer with trai
Payment shall be paid as per actual execution. Width of road from shoulder to shoulder shall be considere
payment. Asphalt road shall be provided from out side road up to substation Gate. This item shall not b
executed inside substation premises.
ng break up for Buildings LUMPSUM(package) items shall be as under. (1) For Control room building,Type.4 quarter
WORK : Percentage OF PAYMENT TO BE RELEASED
: 15 Percentage
vel : 5 PERCENTAGE
vel : 15 percentage
vel : 5 percentage
vel : 10 Percentage
F slab level including parapet. : 15 percentage
ng, Door/Window,Painting , False ceiling etc : 20 Percentage
d Drainage line : 5 percentage
uilding in all respect (The amount will be paid within 60 days against commissioning of sub station only after settleme
ng break up for LUMPSUM(package) items shall be as under. (2) For all GIS Buildings, Security cabin and store buil
WORK : PERCENTAGE OF PAYMENT TO BE RELEASED
: 15 Percentage
vel : 15 Percentage
vel : 20 percentage
F slab level including parapet.: 15 percentage
ng, Door/Window,Painting , False ceiling etc : 20 percentage
d Drainage line : 5 Percentage
uilding in all respect (The amount will be paid within 60 days against commissioning of sub station only after settleme
Total
Cost in
Unit Rate of Rs.
Civil Excluding excludin
Unit Quantity GST g GST
Require
d
Required Currenc
LUMPS
CurrencyEnter yEnter
UM
1 Numeric Numeric
(Packag
ValueEnter ValueEnt
e)
Positive Value er
Positive
Value
Require
d
Currenc
yEnter
Required Numeric
LUMPS CurrencyEnter ValueEnt
UM Numeric er
(Packag ValueEnter Positive
e) 1 Positive Value Value
Require
d
Currenc
yEnter
Required Numeric
UM Numeric er
Require
d
Require
Currenc
d
yEnter
Required Currenc
Numeric
ValueEnt
Required
Numeric Numeric
er
CurrencyEnter
ValueEnter ValueEnt
Positive
NO 33 Numeric
Positive Value er
Value
ValueEnter Positive
NO 33 Positive Value Value
d
Currenc
Require
yEnter
d
Required Numeric
Currenc
CurrencyEnter Require
ValueEnt
yEnter
d
Numeric
Required er
Numeric
ValueEnter Currenc
Positive
CurrencyEnter ValueEnt
Require
yEnter
NO 33 Positive
Numeric Value Value
er
d
Required Numeric
ValueEnter
CurrencyEnter Positive
Currenc
ValueEnt
NO 9 Positive
Numeric Value Value
yEnter
er
Required Require
Numeric
ValueEnter Positive
d
No 9 CurrencyEnter
Positive Value ValueEnt
Value
Currenc
Numeric er
Require
yEnter
ValueEnter Positive
d
NO 297 Required
Positive Value Numeric
Value
CurrencyEnter Currenc
ValueEnt
Require
Numeric yEnter
er
d
Required
ValueEnter Numeric
Positive
Currenc
NO 15 CurrencyEnter
Require
Value
yEnter
Numeric
Required er
d
Numeric
ValueEnter
CurrencyEnter Positive
Currenc
ValueEnt
NO 54 Positive
Numeric Value Value
yEnter
Require
er
Required
ValueEnter Numeric
d
Positive
NO 30 CurrencyEnter
Currenc
Value
Numeric er
yEnter
ValueEnter
Required Positive
Numeric
NO 24 CurrencyEnter
Positive Value Value
ValueEnt
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Require
d
Numeric er
Currenc
ValueEnter Positive
yEnter
NO 8 Positive
Required Value Value
Numeric
Numeric er
ValueEnter Positive
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
Require
yEnter
d
Required Numeric
Currenc
yEnter
Numeric er
Require
Required Numeric
ValueEnter Positive
CurrencyEnter dValueEnt
Currenc
Numeric er
ValueEnter yEnter
Positive
NO 2 Required
Value
UM Numeric er
Require
d
Required Currenc
LUMPS
UM
2 Numeric Numeric
(Packag
ValueEnter ValueEnt
e)
Positive Value er
Positive
Value
Require
d
Currenc
Require
yEnter
Required d
Numeric
CurrencyEnter Currenc
ValueEnt
Numeric yEnter
er
Required
ValueEnter Numeric
Positive
RMT 210 CurrencyEnter
Value
Numeric er
ValueEnter Positive
RMT 100 Positive Value Value
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Require
Positive
RMT 270 Positive Value d
Value
Currenc
yEnter
Required Numeric
Require
d
Numeric er
Currenc
ValueEnter Positive
yEnter
RMT 125 Positive
Required Value Value
Numeric
Numeric er
SQ. ValueEnter Positive
METER 50 Positive Value Value
Require
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Require
Numeric
Numeric Currenc
er
SQ.MET ValueEnter yEnter
Positive
ER 8490 Positive Value Numeric
Required Value
Numeric er
ValueEnter Positive
d
Currenc
yEnter
Required Require
Numeric
Numeric Currenc
er
SQ.MET ValueEnter yEnter
Positive
ER 40 Required
Value
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Require
Required Numeric
d
Currenc
Numeric er
yEnter
ValueEnter Positive
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Require
Numeric er
Currenc
ValueEnter Positive
yEnter
RMT 300 Required
Value
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
NO 6 Positive Value Require
Value
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
RMT 200 Positive Value Require
Value
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Numeric er
Require
d
Currenc
yEnter
Required Numeric
Numeric er
Require
d
Currenc
yEnter
Required Numeric
UM Numeric er
Require
d
Currenc
yEnter
Required Numeric
UM Numeric er
Require
d
Currenc
yEnter
Required Numeric
UM Numeric er
Require
d
Currenc
yEnter
Required Numeric
UM Numeric er
Require
d
Currenc
yEnter
Required Numeric
UM Numeric er
Require
d
Currenc
yEnter
Required Numeric
UM Numeric er
Require
d
Currenc
yEnter
Required Numeric
UM Numeric er
Require
d
Currenc
yEnter
Required Numeric
Numeric er
ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
UM Numeric er
Require
d
180400 Currenc
yEnter
Required Numeric
Numeric er
CU. ValueEnter Positive
METER Positive Value Value
Require
d
Currenc
yEnter
Required Numeric
Numeric er
CU. ValueEnter Positive
Require
d
Currenc
yEnter
Required Numeric
Numeric er
SQ.MET ValueEnter Positive
ER 9000 Positive Value Value
arter (FOR GF+FF BUILDINGS)
ement of material account statement of items supplied, used, erected, and successful commissioning of sub station.
e building (FOR GF BUILDINGS)
ement of material account statement of items supplied, used, erected, and successful commissioning of sub station.
zero
issioning of sub station.The amount will be released in final bill only and payment will be made only after passing of f
issioning of sub station.The amount will be released in final bill only and payment will be made only after passing of f
only after passing of final bill.) : 10 percentage
only after passing of final bill.) : 10 Percentage

SUPPLY-1
SUPPLY SCHEDULE
SUPPLY
Sr. No. Descriptio Unit Qty. HSN Code fUnit Ex-WoUnit Freig UNit InsuraF.O.R.Unit
Supply and Erection of 220kV Switch Yard GIS Equipments considering 31mm/KV creepage distance due to marin
220 KV Indoor GIS Equipment (Separate Enclosure for Each Phase shall be considered)
1.1 3- Ø 220 kVSets 2 Required Required CRequired CRequired CRequired C
1.2 3- Ø 220 kVSet 1 Required Required CRequired CRequired CRequired C
220 KV Outdoor Equipments
2.1 Polymer hoNos. 33 Required Required CRequired CRequired CRequired C
2.2 220kV HighNos. 33 Required Required CRequired CRequired CRequired C
2.3 220kV SF6 Nos. 33 Required Required CRequired CRequired CRequired C
2.4 Metering CNos. 9 Required Required CRequired CRequired CRequired C
2.5 3 X Single Nos. 9 Required Required CRequired CRequired CRequired C
Supply and Erection of Galvanised Structure /Material for 220kV Switch Yard suitable to marine atmosphere (as
1 Gantry str MT 65.6 Required Required CRequired CRequired CRequired C
- Gantry struMT 4.2 Required Required CRequired CRequired CRequired C
2 Lighting MaMT 20.30208 Required Required CRequired CRequired CRequired C
- Lighting MaMT 0.81348 Required Required CRequired CRequired CRequired C
Note: The weight of LM structure may vary as per actual requirement of LMs.
Stringing of Flyover bus with Following Conductor for all the three phases with required Silicon Rubber Insulator
4-B Break Up oRmtr. 787.5 Required Required CRequired CRequired CRequired C
- Silicon RubNo. 36 Required Required CRequired CRequired CRequired C
- Double TenNo. 9 Required Required CRequired CRequired CRequired C
Droppers (including required suspension string with hardware and accessories, if any) and Jumpers (including Eq
5-B Break Up oRMtr 330 Required Required CRequired CRequired CRequired C
- Single Sus No. 9 Required Required CRequired CRequired CRequired C
- Spacers suNo. 33 Required Required CRequired CRequired CRequired C
- Fire WedgeNo. 18 Required Required CRequired CRequired CRequired C
5-D Break Up oRMtr 90 Required Required CRequired CRequired CRequired C
6 Stringing oLump sum 1 Required Required CRequired CRequired CRequired C
Supply and Erection of 33kV Switch Yard Equipments considering 31mm/KV creepage distance due to marine atm
33kV Indoor GIS (Without vaccum interupter) Equipments
1.1 3- Ø 33 kV,Sets
2500 A, 40 kA-3 sec,
24 Required
metal enclosed
Required
SF6 Gas
CRequired
Insulated
CRequired
Switchgear
CRequired
- Line bay
C Module comp
1.2 3- Ø 33 kV,Sets
3150 A, 40 kA-3 sec,
8 Required
metal enclosed
Required
SF6 Gas
CRequired
Insulated
CRequired
Switchgear
CRequired
- Bus bar
C Module comp
1.3 3- Ø 33 kV,Sets
3150 A, 40 kA-3 sec,
10 Required
metal enclosed
Required
SF6 Gas
CRequired
Insulated
CRequired
Switchgear
CRequired
- Bus Coupler
C bay and B
1.4 3- Ø 33 kV,Sets
2500 A, 40 kA-3 sec,
8 Required
metal enclosed
Required
SF6 Gas
CRequired
Insulated
CRequired
Switchgear
CRequired
- 220/33
C KV Transforme
1.5 3- Ø 33 kV,Set
2500 A, 40 kA-3 sec,
2 Required
metal enclosed
Required
SF6 Gas
CRequired
Insulated
CRequired
Switchgear
CRequired
- 33/11C KV Transformer
2 : 33kV Outdoor Equipments
2.1 66kV compos Nos. 24 Required Required CRequired CRequired CRequired C
2.2 66kV compo Nos. 30 Required Required CRequired CRequired CRequired C
2.4 33kV SF6 tNos. 24 Required Required CRequired CRequired CRequired C
Supply and Erection of Galvanised Structure /Material for 33kV Switch Yard suitable to marine atmosphere (as p
Stringing of Flyover bus with Following Conductor for all the three phases with required Silicon Rubber Insulator
3.1 B Break Up oRmtr. 1680 Required Required CRequired CRequired CRequired C
4. Droppers (including required suspension string with hardware and accessories, if any) and Jumpers (including
- Single Sus No. 24 Required Required CRequired CRequired CRequired C
6 Supply andRmtr. 460 Required Required CRequired CRequired CRequired C
7 EOT Crane Nos. 2 Required Required CRequired CRequired CRequired C
8 EOT Crane Nos.
o 1 Required Required CRequired CRequired CRequired C
9 Visual MoniLump sum 1 Required Required CRequired CRequired CRequired C
Ventilation system (for maintaining positive pressure) shall be provided for following building as per Technical Sp
1 220KV GIS Lump sum 1 Required Required CRequired CRequired CRequired C
2 33KV-66KVLump sum 1 Required Required CRequired CRequired CRequired C
10 Fire DetectLump sum 1 Required Required CRequired CRequired CRequired C
11 Supply andNo. 10 Required Required CRequired CRequired CRequired C
- 2) Dry chemNo. 6 Required Required CRequired CRequired CRequired C
- 3) Dry chemNo. 6 Required Required CRequired CRequired CRequired C
- 4) Carbon dNo. 15 Required Required CRequired CRequired CRequired C
- 5) Carbon dNo. 10 Required Required CRequired CRequired CRequired C
- 6) MechanicNo. 6 Required Required CRequired CRequired CRequired C
- 7) MechaniNo. 6 Required Required CRequired CRequired CRequired C
Supply and installation of Tower/Split Air Conditioner Machine at following Locations.
1 3 Ton CapacNos. 7 Required Required CRequired CRequired CRequired C
- 2) LCC RooNos. 7 Required Required CRequired CRequired CRequired C
2 1.5 Ton CapNos. 2 Required Required CRequired CRequired CRequired C
- 2) Admin. ONos. 7 Required Required CRequired CRequired CRequired C
- 3) Recepti Nos. 3 Required Required CRequired CRequired CRequired C
- 4) SecurityNos. 1 Required Required CRequired CRequired CRequired C
3 3 Ton CapaNos. 2 Required Required CRequired CRequired CRequired C
- 2) Confer Nos. 2 Required Required CRequired CRequired CRequired C
- 3) MeetingNos. 1 Required Required CRequired CRequired CRequired C
Total F.O.R.Cost in Rs.
eepage distance due to marine atmosphere of site (as per respective Technical Specifications and relevant special conditions ) suitable f
Required CurrencyEnter Numeric ValueEnter Positive Value


e to marine atmosphere (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus scheme. Only str
ired Silicon Rubber Insulators, hardwares and accessories, spacers provided at every 5.0 mtr. interval (Suitable for 350mm spacing)etc.
y) and Jumpers (including Equipment to Equipment) with Following conductor as per standards and approved drawings with provision
e distance due to marine atmosphere of site (as per respective Technical Specifications and relevant special conditions ) suitable for 2 B


to marine atmosphere (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus scheme. Only stru
ired Silicon Rubber Insulators, hardwares and accessories, spacers provided at every 5.0 mtr. interval (Suitable for 350mm spacing)etc.
any) and Jumpers (including Equipment to Equipment) with Following conductor as per standards and approved drawings with provisio
g building as per Technical Specifications

zero
special conditions ) suitable for 2 Bus system
e for 2 Bus scheme. Only structure drawings of gantry structures shall be issued by GETCO. However, other details required for fabricati
ble for 350mm spacing)etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement
ved drawings with provision of required spacers (Suitable for 350mm spacing) at every 5.0 mtr. interval.
al conditions ) suitable for 2 Bus system

for 2 Bus scheme. Only structure drawings of gantry structures shall be issued by GETCO. However, other details required for fabricatio
roved drawings with provision of required spacers (Suitable for 350mm spacing) at every 5.0 mtr. interval.
details required for fabrication of gantry structures shall be developed by bidder at no extra cost.
ontinuous Bus Arrangement.


SUPPLY-4
SUPPLY SCHEDULE
SUPPLY
L. Supply and Erection of General purpose equipments and materials as per respective technical specifications and r
1 Suitable arPackage 1 Required Required CRequired CRequired CRequired C
2 Distributi Set 4 Required Required CRequired CRequired CRequired C
3 33/11kV 5M Nos. 2 Required Required CRequired CRequired CRequired C
4 DG set 250Set 2 Required Required CRequired CRequired CRequired C
Note: Bidder has to quote against the following spares as applicable. Quantities against the spares shall be finalized
1 220 kV GasNos. 3 Required Required CRequired CRequired CRequired C
1.2 SF6 PressuNos 3 Required Required CRequired CRequired CRequired C
1.3 “O” Rings Set 1 Required Required CRequired CRequired CRequired C
1.4 Molecular Ss et 1 Required Required CRequired CRequired CRequired C
1.5 All types Nos 3 Required Required CRequired CRequired CRequired C
1.6 Covers/ShieSet 1 Required Required CRequired CRequired CRequired C
1.7 Locking devSet 1 Required Required CRequired CRequired CRequired C
1.8 Each type oSet 1 Required Required CRequired CRequired CRequired C
1.9 SF6 to air Nos 3 Required Required CRequired CRequired CRequired C
1.1 Motor of ESet 1 Required Required CRequired CRequired CRequired C
1.11 Limit swit Set 1 Required Required CRequired CRequired CRequired C
2.1 For GIS 220No. 1 Required Required CRequired CRequired CRequired C
2.2 Trip coil Nos 6 Required Required CRequired CRequired CRequired C
2.3 Closing co Nos 3 Required Required CRequired CRequired CRequired C
2.4 Relays, Po Set 1 Required Required CRequired CRequired CRequired C
3: For GIS 220 kV ISOLATORS
3.1 For GIS 220Nos 3 Required Required CRequired CRequired CRequired C
3.2 High speed/No 1 Required Required CRequired CRequired CRequired C
3.3 Single phasNos 1 Required Required CRequired CRequired CRequired C
4 : For GIS 220 KV CURRENT TRANSFORMER
4.1 CTs used i Set 1 Required Required CRequired CRequired CRequired C
5 : For GIS 220kV Potential Transformer
5.1 Gas Insula No 1 Required Required CRequired CRequired CRequired C
33 kV Gas Insulated Switchgear
1.0 General
1.1 SF6 gas Pr Nos 3 Required Required CRequired CRequired CRequired C
1.5 All types Nos 3 Required Required CRequired CRequired CRequired C
1.6 Covers/Shie Set 1 Required Required CRequired CRequired CRequired C
1.8 Each type Set 1 Required Required CRequired CRequired CRequired C
1.11 SF6 to air No 3 Required Required CRequired CRequired CRequired C
2.1 For GIS 33 No 1 Required Required CRequired CRequired CRequired C
2.2 Trip coil Nos 2 Required Required CRequired CRequired CRequired C
2.3 Closing co Nos 1 Required Required CRequired CRequired CRequired C
3.1 For GIS 33 Nos 1 Required Required CRequired CRequired CRequired C
3.2 High speed/ Nos 1 Required Required CRequired CRequired CRequired C
3.3 Three phase Nos 1 Required Required CRequired CRequired CRequired C
4.1 For GIS 33 Set 1 Required Required CRequired CRequired CRequired C
5.1 For GIS 33 No 1 Required Required CRequired CRequired CRequired C
6 : Spares for E O T crane
6.1 Hoist MotoNo 1 Required Required CRequired CRequired CRequired C
6.2 C.T. Motor No 1 Required Required CRequired CRequired CRequired C
6.3 L.T.Motor No 1 Required Required CRequired CRequired CRequired C
6.4 All type of Set 1 Required Required CRequired CRequired CRequired C
(C) DG set ( p Set 2 Required Required CRequired CRequired CRequired C
(D) Welding M/Set 1 Required Required CRequired CRequired CRequired C
(C) Tools and Tackles (General)
1 Earthing R Nos 18 Required Required CRequired CRequired CRequired C
2 Spanner (RSet 3 Required Required CRequired CRequired CRequired C
3 Steel RollerNos 10 Required Required CRequired CRequired CRequired C
4 AluminiumNos R 5 Required Required CRequired CRequired CRequired C
5 One/two/th Nos 2 Required Required CRequired CRequired CRequired C
6 Winch Mach Nos 2 Required Required CRequired CRequired CRequired C
7 Hydraulic PNos 2 Required Required CRequired CRequired CRequired C
8 Hand drill Nos 1 Required Required CRequired CRequired CRequired C
9 Drill MachiNos 2 Required Required CRequired CRequired CRequired C
10 Chain pulleNos 2 Required Required CRequired CRequired CRequired C
11 Wire rope Set 1 Required Required CRequired CRequired CRequired C
12 Water pump Nos 2 Required Required CRequired CRequired CRequired C
13 Crowbar -1Nos 5 Required Required CRequired CRequired CRequired C
14 Crowbar -1Nos 5 Required Required CRequired CRequired CRequired C
15 Hammer wiNos 1 Required Required CRequired CRequired CRequired C
16 Pickaxe ( TNos 5 Required Required CRequired CRequired CRequired C
17 Pawda(shov Nos 5 Required Required CRequired CRequired CRequired C
18 Axe (KuhadNos 5 Required Required CRequired CRequired CRequired C
19 Sythe (DhaNos 10 Required Required CRequired CRequired CRequired C
20 Tar Poline Nos 5 Required Required CRequired CRequired CRequired C
21 Nylon RopeBundle 1 Required Required CRequired CRequired CRequired C
24 AluminiumSet L 2 Required Required CRequired CRequired CRequired C
25 Telescopic Nos 1 Required Required CRequired CRequired CRequired C
26 Hot air bl Nos 1 Required Required CRequired CRequired CRequired C
- Big Capaci Nos 1 Required Required CRequired CRequired CRequired C
27 Vaccum cleNos 1 Required Required CRequired CRequired CRequired C
(D) Safety Tools
1 Full body HNos 15 Required Required CRequired CRequired CRequired C
2 Halmet witNos 10 Required Required CRequired CRequired CRequired C
3 Hand Gloves Pair 6 Required Required CRequired CRequired CRequired C
4 Gum boot P( air for ea 3 Required Required CRequired CRequired CRequired C
(E) Display Boards and others
2 Single lin Set 2 Required Required CRequired CRequired CRequired C
2 Gas Single Set 2 Required Required CRequired CRequired CRequired C
3 Key board Set 2 Required Required CRequired CRequired CRequired C
Supply of Furniture, RO Water Filter System, Water Cooler Etc. as per Annexure-C
1 Furniture No 15 Required Required CRequired CRequired CRequired C
2 b) Steel ra Nos 2 Required Required CRequired CRequired CRequired C
3 c) Providi No 1 Required Required CRequired CRequired CRequired C
4 d) Office Nos 4 Required Required CRequired CRequired CRequired C
5 e) ModularNos 2 Required Required CRequired CRequired CRequired C
6 f) Revolvi Nos 40 Required Required CRequired CRequired CRequired C
7 g) WoodenNos 2 Required Required CRequired CRequired CRequired C
8 h) WoodenNos 2 Required Required CRequired CRequired CRequired C
9 i) Confere Nos 1 Required Required CRequired CRequired CRequired C
10 j) providin Sq.meter 40 Required Required CRequired CRequired CRequired C
11 k) T.W. par Sq.meter 10 Required Required CRequired CRequired CRequired C
12 l)ProvidingSq.meter 1.75 Required Required CRequired CRequired CRequired C
13 m) ProvidinNos 2 Required Required CRequired CRequired CRequired C
14 RO water fNo. 1 Required Required CRequired CRequired CRequired C
15 Water CoolNos 1 Required Required CRequired CRequired CRequired C
16 42 , Sony oNo 1 Required Required CRequired CRequired CRequired C
220KV : EOT Crane spares
1 Hoist MotoNo. 1 Required Required CRequired CRequired CRequired C
2 C.T. Motor No. 1 Required Required CRequired CRequired CRequired C
3 L.T.Motor No. 1 Required Required CRequired CRequired CRequired C
4 All type of Set 1 Required Required CRequired CRequired CRequired C
5 All type of Set 1 Required Required CRequired CRequired CRequired C
2 Supply andSet 2 Required Required CRequired CRequired CRequired C
3 Providing No. 200 Required Required CRequired CRequired CRequired C
4 Tent-StandSet 1 Required Required CRequired CRequired CRequired C
ve technical specifications and relevant special conditions.

nst the spares shall be finalized during detailed Engineering and bidder has to supply the same. If any item not quoted against spares, but








zero
not quoted against spares, but required during detailed engineering shall be supplied by the successful bidder at no extra cost to GETCO.
dder at no extra cost to GETCO.
SUPPLY-1
SUPPLY SCHEDULE
SUPPLY
Protection BOQ of 400kV Dholera Sub-Station

A. Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical s
1 GPS based Set 1 Required Required CRequired CRequired CRequired C
B. Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical s
1. Control and Protection panels for 220KV Bays ( Control Voltage - 220V DC ) as per tech specifications and suitable
1 Control andSet 3 Required Required CRequired CRequired CRequired C
3 Control anSet 1 Required Required CRequired CRequired CRequired C
5 Busbar ProtSet 1 Required Required CRequired CRequired CRequired C
C. Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical s
1. Control and Protection panels for 33KV Bays ( Control Voltage - 220V DC ) as per tech specifications and suitable fo
1.1 Control andSet 24 Required Required CRequired CRequired CRequired C
1.2 Control anSet 4 Required Required CRequired CRequired CRequired C
D. Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical s
1. SCADA comaptible Control and Protection panels for 11KV Bays with Bay Control and Protection Relay ( Control Vo
E. Supply, Erection, Testing and Commissioning of General purpose equipments and materials as per respective tech
1 Battery setNo. 2 Required Required CRequired CRequired CRequired C
2 Battery ChaNo. 2 Required Required CRequired CRequired CRequired C
3 DCDB-220 N Vo. 6 Required Required CRequired CRequired CRequired C
4 SCADA comp No. 1 Required Required CRequired CRequired CRequired C
F. Supply, Installation, Testing and Commissioning of materials/item for Power Cable and Control Cable including pre
1. Supply and Laying of 1.1 kV FRLSH PVC armoured copper/Aluminum control/LT power cable in trench including bi
1.1 2c x 2.5 m LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.2 2c x 4 mm2LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.3 4cx2.5 mm2 LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.6 12c x 2.5 LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.7 12c x 4 mmLUMPSUM 1 Required Required CRequired CRequired CRequired C
1.1 A) 1 x 50 LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.1 B) 4C x 10 LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.11 4 x 10 mm2LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.12 3.5 x 25 m LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.14 3.5 x 120 LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.15 1C x 150 mLUMPSUM 1 Required Required CRequired CRequired CRequired C
2 Supply, EreLUMPSUM 1 Required Required CRequired CRequired CRequired C
3. Providing and fixing of suitable BOX type GI perforated tray with necessary clamps and couplings for control cable
1 220 kV SwiMtr. 30 Required Required CRequired CRequired CRequired C
2 11 kV swit Mtr. 20 Required Required CRequired CRequired CRequired C
1 11 kV swit Mtr. 70 Required Required CRequired CRequired CRequired C
2 Providing aNo. 2 Required Required CRequired CRequired CRequired C
Providing and fixing of all weather proof, cold rolled sheet steel junction box for CVT and PT, CT terminations with 30
1 PT JB No. 1 Required Required CRequired CRequired CRequired C
2 CT JB No. 1 Required Required CRequired CRequired CRequired C
Note:
Battery and Charger sizings are tentative as they are derived on the basis of available data of trip coil, LCC, DC Drives
$ Quantity and size of cables shall be derived by bidder based on GIS and LCC requirement. Typical philosophies are
@ Being a Solar Generation pooling Substation, Under frequency protection will not be applicable, hence panel is no
All items in Part-1 and Part-2 are compliment to each other and the whole BOQ is for single system, all line items pri
SCADA BOQ of 400kV Dholera Sub-Station
(400kV, 220kV, 66kV and 33kV)
A. Supply, Erection, Testing and Commissioning of SCADA equipments and materials as per respective technical spec
1 Bay ControlNos 1 Required Required CRequired CRequired CRequired C
2 HMI ServerNos 2 Required Required CRequired CRequired CRequired C
3 DR workstaNo. 1 Required Required CRequired CRequired CRequired C
4 Gateway foNo 1 Required Required CRequired CRequired CRequired C
5 SCADA softw No 1 Required Required CRequired CRequired CRequired C
6 Ethernet FNos 25 Required Required CRequired CRequired CRequired C
7 Line Interf Nos 30 Required Required CRequired CRequired CRequired C
9 Laser Jet c Nos 1 Required Required CRequired CRequired CRequired C
10 Laser Jet PNos 1 Required Required CRequired CRequired CRequired C
11 3 KVA UPS Nos 2 Required Required CRequired CRequired CRequired C
12 Armoured M F TR. 2000 Required Required CRequired CRequired CRequired C
13 Panel for Nos 1 Required Required CRequired CRequired CRequired C
15 Furniture Set 1 Required Required CRequired CRequired CRequired C
Spares for SCADA and Protection (Of Highest Configuration)
1 Bay ControNos 2 Required Required CRequired CRequired CRequired C
2 Bay ControNos 1 Required Required CRequired CRequired CRequired C
3 Transformer Nos 1 Required Required CRequired CRequired CRequired C
5 Ethernet fiNos 4 Required Required CRequired CRequired CRequired C
6 Busbar ProNos 2 Required Required CRequired CRequired CRequired C
7 Busbar ProtNos 1 Required Required CRequired CRequired CRequired C
Note:
1) Any material/equipment accessories which are not listed in BOQ or scope of supply but required to complete the
2)Ethernet switches shall have as many spare ports as utilized ports. If two Ethernet Switches are provided in place o
3) PLCC / FOTE BCU shall have sufficient I/Os as per given list considering future lines also.
4) BCU for station Auxiliary shall have sufficient I/Os as per list or otherwise suitable RTU shall be provided.
5) Contractor shall be responsible for necessary co-ordination with FOTE and OPGW supplier and erection agency to
6) @ Quantity shall be sufficient to accommodate all spares as per spare list.
Termination of the Control and Power cable at panel / MK box/equipment including PVC binding, dressing, shaping,
- 1) cables f Lumsum 1 Required Required CRequired CRequired CRequired C
- 2) cables aLumsum 1 Required Required CRequired CRequired CRequired C
Laying of 1.1kv FRLSH PVC/XLPE armored Al. LT power cable in ground by digging trench of suitable width and 450 m
- 1) Control Lumsum 1 Required Required CRequired CRequired CRequired C
- 2) Control Lumsum 1 Required Required CRequired CRequired CRequired C
rials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 400kV side
ials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus with Sectionaliser system on 22
tech specifications and suitable for GIS switchgear modules with following break up
ech specifications and suitable for GIS switchgear modules with following break up
rials as per respective technical specifications and relevant special conditions and suitable for Single Bus system on 11kV side
and Protection Relay ( Control Voltage - 220V DC ) as per tech specifications and suitable for conventional switchgear module with followin
materials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 400kV and 66
and Control Cable including preparation of wiring schedule on the basis of GIS/HYBRID and LCC requirement and referring to typical philos
ower cable in trench including binding/clamping of cable with PVC locable wire tie as per requirement including supply and fixing of identifi
s and couplings for control cable of PT/CVT etc. equipments including fixing with structures up to plinth level as per instruction of Engineer
s and couplings for control cable of CB, Isolator, Earth Switch etc. equipments including fixing with structures up to plinth level as per instru
and PT, CT terminations with 30 Nos. of disconnecting type, Elmex - make CATDM 4 or equivalent type connectors and required no of fuse
e data of trip coil, LCC, DC Drives, GIS Module etc. Bidder has to derive Battery and Charger sizing based on their GIS component rating and
ement. Typical philosophies are for reference only. However basic requirements like, 4 Sq.mm cable for CT, PT and 2.5 Sq.mm for Control w
be applicable, hence panel is not cosnidered.
r single system, all line items price shall must be filled by all contractors rationally or otherwise bid will not be considered. The system mus
as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 400kV and 66kV and Tw

ply but required to complete the job shall be included and shown in technical bid.
Switches are provided in place of one Ethernet Switch to (satisfy port requirements) as per tender drawings/documents then provided two
RTU shall be provided.

supplier and erection agency to establish remote connectivity and over all operation from Master Control Centre through SCADA system.
PVC binding, dressing, shaping, drilling of holes in panels for glands nuts, providing of glands for following size. The work also includes loop
ench of suitable width and 450 mm depth with providing and fixing of brick and sand layer covering the cable in any type of soil and Laying
zero
s system on 400kV side
s with Sectionaliser system on 220kV side
stem on 11kV side

witchgear module with following break up
ain Bus system on 400kV and 66kV side and Two Main Bus with Sectionaliser system on 220kV and 33kV side
ent and referring to typical philosophy. However, final Cable philosophy shall be derived during detailed engineering and got approved. (Ple
uding supply and fixing of identification tags at both ends and at distance of every 100mtr. (Note :- Aluminium cables of size 185 mm2 and a
el as per instruction of Engineer-in-charge.
es up to plinth level as per instruction of Engineer-in-charge.
nnectors and required no of fuses, links etc.as per instruction of Engineer-in-charge.
their GIS component rating and design and accordingly it shall be quoted (Size not less than shown in BOQ). Battery and charger sizing sha
PT and 2.5 Sq.mm for Control wiring is to be followed as per philosophy. Also, 1CX150 size cables for incoming AC supply are to be conside
be considered. The system must be integrated in all respect to act as single system, testing and comissioninfg of whole system shall be com
stem on 400kV and 66kV and Two Main with Bus sectionalizer on 220kV and 33kV side
gs/documents then provided two switches shall be considered as single switch.
Centre through SCADA system.
size. The work also includes looping in Panel and MK box by using crimping type lugs of suitable size with ferruling (machine printed) with
ble in any type of soil and Laying of 1.1kv PVC armored copper control cable in heavy duty PVC pipe of suitable size buried in ground by digg
gineering and got approved. (Please refer Remarks)
um cables of size 185 mm2 and above shall be XLPE type)
Q). Battery and charger sizing shall be got approved during detailed engineering before finalization. Accordingly dimensions of LV Room, Batt
ming AC supply are to be considered as per rating of LT Panel board. Other than GIS-LCC - Panel cables, typical philosophies may be referred
nfg of whole system shall be completed as single system.

erruling (machine printed) with proper size of copper cable wire. The loops should be bunched by using button tape and proper shaping et
able size buried in ground by digging trench of suitable width and 450 mm depth in any type of soil including supply and fixing of Pipe and i
ngly dimensions of LV Room, Battery room etc. shall be finalized.
cal philosophies may be referred.
utton tape and proper shaping etc.
ng supply and fixing of Pipe and identification tags at distance of every 100 Mtrs for following size
SUPPLY-5
SUPPLY SCHEDULE
SUPPLY
M. Supply and installation of materials for Illumination system in all respect as per respective specifications and spec
Indoor Illumination
1. Providing and Fixing of Energy Efficient LED type (Techhnical spec Cl No. 2.10.4.8-I LED 3 type) Indoor decorative l
i SCADA ConPackage 1 Required Required CRequired CRequired CRequired C
ii Lab Package 1 Required Required CRequired CRequired CRequired C
iii Reception Package 1 Required Required CRequired CRequired CRequired C
iv Conferenc Package 1 Required Required CRequired CRequired CRequired C
v Admin OffiPackage 1 Required Required CRequired CRequired CRequired C
vi LCC RoomsPackage 1 Required Required CRequired CRequired CRequired C
2. Providing and Fixing of Energy Efficient LED Type (Techhnical spec Cl No. 2.10.4.8-I LED 1 or I LED 2 type) Indoor d
i LV Room Package 1 Required Required CRequired CRequired CRequired C
ii Store Roo Package 1 Required Required CRequired CRequired CRequired C
iii Ramp SlopPackage 1 Required Required CRequired CRequired CRequired C
iv Pantry Package 1 Required Required CRequired CRequired CRequired C
v Passage (CPackage 1 Required Required CRequired CRequired CRequired C
vi Ramp SlopPackage 1 Required Required CRequired CRequired CRequired C
vii Veranda Package 1 Required Required CRequired CRequired CRequired C
viii WCs Package 1 Required Required CRequired CRequired CRequired C
ix Toilets Package 1 Required Required CRequired CRequired CRequired C
x AHU RoomPackage 1 Required Required CRequired CRequired CRequired C
xi Security C Package 1 Required Required CRequired CRequired CRequired C
xii Battery R Package 1 Required Required CRequired CRequired CRequired C
3. Providing and Fixing of Energy Efficient LED type (Techhnical spec Cl No. 2.10.4.8-I LED4 Type) Indoor decorative lu
i 220KV andPackage 1 Required Required CRequired CRequired CRequired C
i Store buildPackage 1 Required Required CRequired CRequired CRequired C
5. Providing and Fixing of Energy Efficient Indoor 2x36 Tube light for Quaters (4 Nos.) in all the rooms, passages com
i Drawing roPackage 1 Required Required CRequired CRequired CRequired C
ii Bedroom 1o Package 1 Required Required CRequired CRequired CRequired C
iii Bedroom 2Package 1 Required Required CRequired CRequired CRequired C
6. Providing and Fixing of Energy Efficient Indoor luminaries in all the rooms, passages Qtr (4 Nos.) complete (ref. An
i Passage forPackage 1 Required Required CRequired CRequired CRequired C
ii Toilet com Package 1 Required Required CRequired CRequired CRequired C
iii Toilet att Package 1 Required Required CRequired CRequired CRequired C
iv Kitchen forPackage 1 Required Required CRequired CRequired CRequired C
v Store for TPackage 1 Required Required CRequired CRequired CRequired C
Outdoor Illumination
7 Providing aPackage 1 Required Required CRequired CRequired CRequired C
14 Supply andNos 4 Required Required CRequired CRequired CRequired C
16 Providing oPackage 1 Required Required CRequired CRequired CRequired C
Note: The quantities of the ACPs mentioned in the schedule of requirement are based on std. requirement, which sh
Indoor illumination : Providing and Fixing of Energy Efficient LED type (Techhnical spec Cl No. 2.10.4.8-I LED 3 type) I
- Meeting R Package 1 Required Required CRequired CRequired CRequired C
espective specifications and special conditions (Important Note: Concealed wiring shall be considered for Indoor Illumination)
I LED 3 type) Indoor decorative luminaries as per design calculation, with respect to required lux level and relevant tender drgs.as per techn
I LED 1 or I LED 2 type) Indoor decorative luminaries as per design calculation, with respect to required lux level and relevant tender drgs.a
I LED4 Type) Indoor decorative luminaries as per design calculation, with respect to required lux level and relevant tender drgs., and requir
) in all the rooms, passages complete (ref. Ann-4) as per technical spec with required casing caping point wiring as per technical spec. Scop
es Qtr (4 Nos.) complete (ref. Ann-4 as per technical spec Cl No. 2.10.4.8 (CFL type) with required casing caping point wiring as per technica

ed on std. requirement, which shall be finalized during detail engineering. The bidder has to assess the qty. of ACPs at the time of quoting t
ec Cl No. 2.10.4.8-I LED 3 type) Indoor decorative luminaries as per design calculation, with respect to required lux level and relevant tende
zero
ndoor Illumination)
relevant tender drgs.as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex-
level and relevant tender drgs.as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency Light, Bel
elevant tender drgs., and required industrial grade point wiring as per technical spec. Scope also includes providing and fixing of 15/5 A plu
iring as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan,with requis
ping point wiring as per technical spec. Scope also includes providing and fixing of 15/5 A plug, as per Ann-4 in following rooms--- With sup
of ACPs at the time of quoting the bid. The qty of ACPs finalized during detail engineering is binding to the bidder and no any extra payme
uired lux level and relevant tender drgs.as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency L
e Emergency Light, Bell, Fan, Ex- Fan, DC Point,Occupancy and Light Level Sensor with requisite MCBs and DC 100W lamp , DC Plug etc all it
g, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point, Occupancy and Light Level Sensor with requisite MCBs and DC 100W lamp , DC Pl
providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point,Occupancy and Light Level Sensor with requisite M
ht, Bell, Fan, Ex- Fan,with requisite MCBs and as per Ann-4 in following amenities
-4 in following rooms--- With supply and fixing of 3 KW Geyser (Instant type Sphere hot make ) Arrangement in bathroom or attached toile
e bidder and no any extra payment shall be made. In all the case the decision of GETCO will be final.
5/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point,Occupancy and Light Level Sensor with requisite MCBs and DC 100W lamp
DC 100W lamp , DC Plug etc all items as per Ann-4 in following rooms (with safety device ELCB)
MCBs and DC 100W lamp , DC Plug etc all items as per Ann-4 in following rooms (with safety device ELCB)
ght Level Sensor with requisite MCBs and DC 100W lamp , DC Plug etc all items as per Ann-4 in following rooms (with safety device ELCB)
MCBs and DC 100W lamp , DC Plug etc all items as per Ann-4 in following room.
nt in bathroom or attached toilet blocks

quisite MCBs and DC 100W lamp , DC Plug etc all items as per Ann-4 in following rooms (with safety device ELCB)
ooms (with safety device ELCB)
SUPPLY-6
SUPPLY SCHEDULE
SUPPLY
N. Supply and installation of materials for Earthing system in all respect as per respective specifications and special c
1. Supply and Installation of earthing strips/round bars as shown below including digging of 600 mm depth and 450
a) 75 x 10 mmRMt. 8000 Required Required CRequired CRequired CRequired C
b) 50 x 6 mm RMt.
G 5550 Required Required CRequired CRequired CRequired C
c) 40 mm diaRMt. 7120 Required Required CRequired CRequired CRequired C
d) 40mm dia 3 Nos. 80 Required Required CRequired CRequired CRequired C
e) 25X3mm GIRMt. 10000 Required Required CRequired CRequired CRequired C
2 Providing aNos. 4 Required Required CRequired CRequired CRequired C
3 Supply, In Nos. 110 Required Required CRequired CRequired CRequired C
4 Providing Nos. 110 Required Required CRequired CRequired CRequired C
5 Design of ePackage 1 Required Required CRequired CRequired CRequired C
6 Earthing AdPackage 1 Required Required CRequired CRequired CRequired C
7 Thermo scanPackage 1 Required Required CRequired CRequired CRequired C
Note: Extra earth should be removed away from the site s/s premises or refilling earthing pits if required. All require
O. Supply and Erection of Ladder type Cable trays and Accessories as per respective Technical Specifications and rele
i Width of t Rmtr. 400 Required Required CRequired CRequired CRequired C
ii Width of t Rmtr. 400 Required Required CRequired CRequired CRequired C
Length: Standard length of tray is 2500mm, Height is 75mm, Thickness is 2mm (min.)
Note: Cross, Tees, Elbows, Coupler plates, Bends, Reducer etc. required for complete installation of Ladder Type Tray
SPECIAL NOTES:
1.Supply and Erection of any 220/33kV Transformers are not in the scope of bidder, but bidder will erect the items o
2 . Cable sealing end with termination kit suitable for 3 Run 3CX500sq.mm XLPE cable for line bays are in the scope o
3. Submission of study report of Very Fast Transient Over Voltage (VFTO) shall be in the scope of bidder.
4. Successful bidder has to depute his expert to visit site annually for the period of five years from the date of comm
5.Lightning Masts shall be provided for Switchyard area etc. as per DSLP Calculation. Lightning protection of Building
6 : LCC of 220 and 33kV GIS shall be front openable. LCC shall be installed in such a way that facing of front side of LC
7 : Mounting channels to be grouted in flooring for GIS support shall be designed and verified by GIS OEM only.
8 : Perforated GI tray along with GI cover shall be considered for supporting cables on GIS module also up to cable tr
9 : 5 MVA 33/11 KV Station Transformer and 11kV/415V Distribution Transformers shall be painted with anti-corrosiv
10 : All the GIS Equipment structure, GIB duct supoort str. and outdoor equipment structures, Gantry structures and
ctive specifications and special conditions (Successful bidder has to submit the complete design and BOQ for approval)
gging of 600 mm depth and 450 mm wide trench fixing on structure as per std equipment earthing philosophy including fixing arrangemen
thing pits if required. All required materials for this job such as Copper Bonded Earthing Steel Rods, CI cover with frame,cement,sand, Grou
Technical Specifications and relevant special conditions
e installation of Ladder Type Tray are included in the Scope.
but bidder will erect the items other than the scope of transformer manufacturer and witness during the erection and testing of the same
le for line bays are in the scope of GIS manufacturer.It shall be installed in co-ordination with cable laying agency by EPC contractor.
the scope of bidder.
five years from the date of commissioning to inspect GIS for carrying out status evaluation of GIS performance.This is intended to share the
Lightning protection of Buildings shall be provided as per IS 2309.
way that facing of front side of LCC and GIS module is same. Opposite to LCC panel, CandR panels shall be arranged exactly in line with GIS
d verified by GIS OEM only.
on GIS module also up to cable trench.
hall be painted with anti-corrosive PU based paint having minimum 50 micron coating. considering saline atmosphere.
tructures, Gantry structures and LM structures shall have GI coating considering marine atmosphere as per specifications.
zero
or approval)
phy including fixing arrangement with two bolt arrangement, jointing, welding etc. complete.
er with frame,cement,sand, Ground Enhancement Material, gravel, bricks etc. to be supplied by the contractor.
erection and testing of the same and provide all the result in as built drawings/documents.
gency by EPC contractor.
nce.This is intended to share the operational challenges and confirming the maintenances followed by GETCO.
arranged exactly in line with GIS module. Sufficient maintenance space shall be kept between LCC and CandR panel.
tmosphere.
r specifications.
SUPPLY-3
SUPPLY SCHEDULE
SUPPLY
Annexure - B
1 AIO Comput Set 1 Required Required CRequired CRequired CRequired C
2 A-4 size m set 1 Required Required CRequired CRequired CRequired C
3 Digital Earth
NoResistance Tester 1with
Required
all required
Required
accessories
CRequired
from
CRequired
followingCRequired
make andCmodel GE-OHM C M
4 Clamp on m No 1 Required Required CRequired CRequired CRequired C
5 Hydraulic No. 1 Required Required CRequired CRequired CRequired C
6 Insulation No 1 Required Required CRequired CRequired CRequired C
7 Tan Delta No 1 Required Required CRequired CRequired CRequired C
8 EmergencyNo 1 Required Required CRequired CRequired CRequired C
9 CB AnalyzeNo 1 Required Required CRequired CRequired CRequired C
10 LCM Kit fr No 1 Required Required CRequired CRequired CRequired C
11 Oil BDV te No 1 Required Required CRequired CRequired CRequired C
12 SF6 gas fi No 1 Required Required CRequired CRequired CRequired C
13 SF6 Gas Fi Set 1 Required Required CRequired CRequired CRequired C
14 Dew point Set 1 Required Required CRequired CRequired CRequired C
15 SF6 gas le Set 1 Required Required CRequired CRequired CRequired C
16 Portable h No 1 Required Required CRequired CRequired CRequired C
17 Hydraulic PNo 1 Required Required CRequired CRequired CRequired C

zero
Erection Schedule
Erection-1
Erection
Sr. No. Descriptio Unit Quantity Unit Rate oTotal Cost in Rs. excluding GST
Sr.No SAC code for identification only
Supply and Erection of 220kV Switch Yard GIS Equipments considering 31mm/KV creepage distance due to marine a
A- Supply and Erection of 220kV Switch Yard GIS Equipments considering 31mm/KV creepage distance due to marin
1 : 220 KV Indoor GIS Equipment (Separate Enclosure for Each Phase shall be considered)
1.1 Required 3- Ø 220 kVSets 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
1.3 Required 3- Ø 220 kVSet 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
1.5 Required 3- Ø 220 k Sets 8 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 : 220 KV Outdoor Equipments
2.1 Required Polymer hoNos. 33 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.2 Required 220kV HighNos. 33 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.3 Required 220kV SF6 Nos. 33 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.4 Required Metering CNos. 9 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.5 Required 3 X Single Nos 9 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Supply and Erection of Galvanised Structure /Material for 220kV Switch Yard suitable to marine atmosphere (as per
1 Required Gantry struMT 69.8 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required Lighting MaMT 21.11556 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Note: The weight of LM structure may vary as per actual requirement of LMs.
4 Required Stringing oRmtr. 393.75 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required Droppers (RMtr 165 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5.2 Required Single AL5 RMtr 90 Required CRequired CurrencyEnter Numeric ValueEnter Positive
6 Required Stringing oLump sum 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
zero
eepage distance due to marine atmosphere of site (as per respective Technical Specifications and relevant special conditions ) suitable for 2
creepage distance due to marine atmosphere of site (as per respective Technical Specifications and relevant special conditions ) suitable fo
nter Numeric ValueEnter Positive Value


e to marine atmosphere (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus scheme. Only structu

special conditions ) suitable for 2 Bus system
nt special conditions ) suitable for 2 Bus system
e for 2 Bus scheme. Only structure drawings of gantry structures shall be issued by GETCO. However, other details required for fabrication
Erection Schedule
Erection-1
Erection
Supply and Erection of 33kV Switch Yard Equipments considering 31mm/KV creepage distance due to marine atmos
33kV Indoor GIS (Without vaccum interupter) Equipments
1.1 Required 3- Ø 33 kV,Sets
2500 A, 40 kA-3 sec,
24 Required
metal enclosed
CRequired
SF6 Gas
CurrencyEnter
Insulated Switchgear
Numeric ValueEnter
- Line bay Positive
Modul
3150 A, 40 kA-3 sec,
8 Required
metal enclosed
CRequired
SF6 Gas
CurrencyEnter
Numeric ValueEnter
- Bus bar Module
Positive
3150 A, 40 kA-3 sec,
10 Required
metal enclosed
CRequired
SF6 Gas
CurrencyEnter
Numeric ValueEnter
- Bus Coupler
Positive
bay
2500 A, 40 kA-3 sec,
8 Required
metal enclosed
CRequired
SF6 Gas
CurrencyEnter
Numeric ValueEnter
- 220/33 KVPositive
Tran
1.5 Required 3- Ø 33 kV,Set2500 A, 40 kA-3 sec,
2 Required
metal enclosed
CRequired
SF6 Gas
CurrencyEnter
Numeric ValueEnter
- 33/11 KVPositive
Transf
2 : 33kV Outdoor Equipments
2.1 Required 66kV compos Nos. 24 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.2 Required 66kV compo Nos. 30 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.3 Required Polymer hoNos 30 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.4 Required 33kV SF6 tNos. 24 Required CRequired CurrencyEnter Numeric ValueEnter Positive
D : Supply and Erection of Galvanised Structure /Material for 33kV Switch Yard suitable to marine atmosphere (as pe
1 Required Gantry str MT 27.4 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required Stringing oRmtr. 840 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required Droppers (RMtr 480 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required Supply andRmtr. 460 Required CRequired CurrencyEnter Numeric ValueEnter Positive
6 Required EOT Crane Nos.
( 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
o 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
8 Required Visual MoniLump sum 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
9 Required VentilationLump sum 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required 33KV-66KVLump sum 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
10 Required Fire DetectLump sum 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Supply and Erection of General purpose equipments and materials as per respective technical specifications and rele
11 Required Suitable arPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
12 Required Distributi Set 4 Required CRequired CurrencyEnter Numeric ValueEnter Positive
13 Required 33/11kV 5MV Nos. 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
14 Required DG set 250Set 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
15 Required Supply andSet 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
zero
e distance due to marine atmosphere of site (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus


ble to marine atmosphere (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus scheme. Only struc
technical specifications and relevant special conditions.
ble for 2 Bus scheme. Only structure drawings of gantry structures shall be issued by GETCO. However, other details required for fabricatio
er details required for fabrication of gantry structures shall be developed by bidder at no extra cost.
Erection Schedule
Erection-1
Erection
Supply and installation of materials for Illumination system in all respect as per respective specifications and special
Indoor Illumination
1 Required Providing aPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required Lab Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required Reception Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4 Required Conferenc Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required Admin OffiPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
6 Required LCC RoomsPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
7 Required Meeting R Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Store Roo Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Ramp SlopPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Pantrys Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Passages (CPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Ramp SlopPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Veranda Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required WCs Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Toilets Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required AHU RoomPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Security C Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Battery R Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Bedroom 1o Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Bedroom 2Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Toilet com Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Toilet att Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Kitchen forPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required Store for TPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Outdoor Illumination
14 Required Supply andNos 4 Required CRequired CurrencyEnter Numeric ValueEnter Positive
16 Required Providing oPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Supply and installation of materials for Earthing system in all respect as per respective specifications and special con
1 Required Supply andRMt. 8000 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required b) 50 x 6 mRMt. 5550 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required c) 40 mm diRMt. 7120 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required d) 40mm diNos. 80 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required e) 25X3mmRMt. 10000 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required Providing aNos. 4 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required Supply, In Nos. 110 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4 Required Providing Nos. 110 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required Design of ePackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
6 Required Earthing AdPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
7 Required Thermo scan Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
8 Required Supply andRmtr.
Erection of Ladder
400Type
Required
CableCRequired
Trays and Accessories
CurrencyEnteras per
Numeric
respective
ValueEnter
Technical
Positive
Spe
- Required 2.350mm Rmtr. 400 Required CRequired CurrencyEnter Numeric ValueEnter Positive
SPECIAL NOTES:
Supply and Erection of any 220/33kV Transformers are not in the scope of bidder, but bidder will erect the items oth
Cable sealing end with termination kit suitable for 3 Run 3CX500sq.mm XLPE cable for line bays are in the scope of G
Lightning Masts shall be provided for Switchyard area etc. as per DSLP Calculation. Lightning protection of Buildings
Submission of study report of Very Fast Transient Over Voltage (VFTO) shall be in the scope of bidder.
Successful bidder has to depute his expert to visit site annually for the period of five years from the date of commiss
LCC of 220 and 33kV GIS shall be front openable. LCC shall be installed in such a way that facing of front side of LCC a
Mounting channels to be grouted in flooring for GIS support shall be designed and verified by GIS OEM only.
Perforated GI tray along with GI cover shall be considered for supporting cables on GIS module also up to cable trenc
5 MVA 33/11 KV Station Transformer and 11kV/415V Distribution Transformers shall be painted with anti-corrosive P
All the GIS Equipment structure, GIB duct supoort str. and outdoor equipment structures, Gantry structures and LM
zero
ective specifications and special conditions (Important Note: Concealed wiring shall be considered for Indoor Illumination)


ve specifications and special conditions (Successful bidder has to submit the complete design and BOQ for approval)
ut bidder will erect the items other than the scope of transformer manufacturer and witness during the erection and testing of the same an
or line bays are in the scope of GIS manufacturer.It shall be installed in co-ordination with cable laying agency by EPC contractor.
ightning protection of Buildings shall be provided as per IS 2309.
e scope of bidder.
years from the date of commissioning to inspect GIS for carrying out status evaluation of GIS performance.This is intended to share the op
y that facing of front side of LCC and GIS module is same. Opposite to LCC panel, CandR panels shall be arranged exactly in line with GIS mo
erified by GIS OEM only.
GIS module also up to cable trench.
be painted with anti-corrosive PU based paint having minimum 50 micron coating. considering saline atmosphere.
tures, Gantry structures and LM structures shall have GI coating considering marine atmosphere as per specifications.
or Illumination)
ection and testing of the same and provide all the result in as built drawings/documents.
ncy by EPC contractor.
e.This is intended to share the operational challenges and confirming the maintenances followed by GETCO.
nged exactly in line with GIS module. Sufficient maintenance space shall be kept between LCC and CandR panel.
Erection Schedule
Erection-1
Erection
" Protection BOQ of 400kV Dholera Sub-Station
A : Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical
1 Required Control andSet 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
B : Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical s
3 Required Control anSet 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required 9) Busbar PSet 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical spe
2 Required 2) Control Set 4 Required CRequired CurrencyEnter Numeric ValueEnter Positive
1 Required SCADA comap Set 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Supply, Erection, Testing and Commissioning of General purpose equipments and materials as per respective technic
1 Required Battery setNo. 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required Battery ChaNo. 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required DCDB-220 N Vo. 6 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4 Required SCADA comp No. 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required SCADA comp No. 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
"Supply, Installation, Testing and Commissioning of materials/item for Power Cable and Control Cable including prep
Supply and Laying of 1.1 kV FRLSH PVC armoured copper/Aluminum control/LT power cable in trench including bind
1 Required 1) 2c x 2. LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required 2) 2c x 4 LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required 3) 4cx2.5 LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required 5) 7c x 2. LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
10 Required 10A) 1 x 5 LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
11 Required 10B) 4C x LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
12 Required 11) 4 x 10 LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
13 Required 12) 3.5 x LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
16 Required 15) 1C x 1 LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required Termination LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 2) cables aLS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required Laying of 1LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 2) Control LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3.1 Required Supply, EreLS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4 Required Providing aMtr 30 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 2)11 kV swMtr 20 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4.1 Required Providing aMtr 70 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required Providing aNo. 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 2) CT JB No 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Note: Battery and Charger sizings are tentative as they are derived on the basis of available data of trip coil, LCC, DC
Quantity and size of cables shall be derived by bidder based on GIS and LCC requirement. Typical philosophies are fo
"SCADA BOQ of 400kV Dholera Sub-Station
A :Supply, Erection, Testing and Commissioning of SCADA equipments and materials as per respective technical spec
1 Required Bay ControlNos 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required HMI ServerNos 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required DR workstaNo 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4 Required Gateway foNo 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required SCADA softw No 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
6 Required Ethernet FNo 25 Required CRequired CurrencyEnter Numeric ValueEnter Positive
7 Required Line Interf Nos 30 Required CRequired CurrencyEnter Numeric ValueEnter Positive
8 Required Line Interf No 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
9 Required Laser Jet c Nos 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
10 Required Laser Jet PNo 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
11 Required 3 KVA UPS Nos 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
12 Required Armoured M F TR. 2000 Required CRequired CurrencyEnter Numeric ValueEnter Positive
13 Required Panel for Nos 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
15 Required Furniture Set 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Note: 1) Any material/equipment accessories which are not listed in BOQ or scope of supply but required to comple
zero
rials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus with Sectionaliser system on 2
s as per respective technical specifications and relevant special conditions and suitable for Two Main Bus with Sectionaliser system on 33kV
s as per respective technical specifications and relevant special conditions and suitable for Single Bus system on 11kV side
aterials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 400kV and 66kV
and Control Cable including preparation of wiring schedule on the basis of GIS/HYBRID and LCC requirement and referring to typical philoso
er cable in trench including binding/clamping of cable with PVC locable wire tie as per requirement including supply and fixing of identifica
vailable data of trip coil, LCC, DC Drives, GIS Module etc. Bidder has to derive Battery and Charger sizing based on their GIS component ratin
ment. Typical philosophies are for reference only. However basic requirements like, 4 Sq.mm cable for CT, PT and 2.5 Sq.mm for Control wir
of supply but required to complete the job shall be included and shown in technical bid. 2)Ethernet switches shall have as many spare ports
us system on 400kV side
us with Sectionaliser system on 220kV side
with Sectionaliser system on 33kV side
m on 11kV side
n Bus system on 400kV and 66kV side and Two Main Bus with Sectionaliser system on 220kV and 33kV side
nt and referring to typical philosophy. However, final Cable philosophy shall be derived during detailed engineering and got approved.
ng supply and fixing of identification tags at both ends and at distance of every 100mtr. (Note :- Aluminium cables of size 185 mm2 and abo
sed on their GIS component rating and design and accordingly it shall be quoted (Size not less than shown in BOQ). Battery and charger sizi
T and 2.5 Sq.mm for Control wiring is to be followed as per philosophy. Also, 1CX150 size cables for incoming AC supply are to be considere
stem on 400kV and 66kV and Two Main with Bus sectionalizer on 220kV AND 33kV side
s shall have as many spare ports as utilized ports. If two Ethernet Switches are provided in place of one Ethernet Switch to (satisfy port req
neering and got approved.
cables of size 185 mm2 and above shall be XLPE type)
in BOQ). Battery and charger sizing shall be got approved during detailed engineering before finalization. Accordingly dimensions of LV Roo
ng AC supply are to be considered as per rating of LT Panel board. Other than GIS-LCC - Panel cables, typical philosophies may be referred.
hernet Switch to (satisfy port requirements) as per tender drawings/documents then provided two switches shall be considered as single sw
ccordingly dimensions of LV Room, Battery room etc. shall be finalized.
al philosophies may be referred. Being a Solar Generation pooling Substation, Under frequency protection will not be applicable, hence pan
s shall be considered as single switch. 3) PLCC / FOTE BCU shall have sufficient I/Os as per given list considering future lines also. 4) BCU for
will not be applicable, hence panel is not cosnidered.
ering future lines also. 4) BCU for station Auxiliary shall have sufficient I/Os as per list or otherwise suitable RTU shall be provided. 5) Contra
RTU shall be provided. 5) Contractor shall be responsible for necessary co-ordination with FOTE and OPGW supplier and erection agency to
W supplier and erection agency to establish remote connectivity and over all operation from Master Control Centre through SCADA system.6
l Centre through SCADA system.6) @ Quantity shall be sufficient to accommodate all spares as per spare list.
Total Supply Part I
-
For this form Cross Form Formula exist in Supply Part 1Supply Part 1.2Supply Part 1.3Supply Part 1.4Supply Part 1.5S
Total Supply Part 1

Supply 1 zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
Supply 1.2 zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
Total Supplzero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
3Supply Part 1.4Supply Part 1.5Supply Part 1.6 Forms, First fill the associated form then fill this form
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
Total Erection Package I
-
For this form Cross Form Formula exist in Erection Part 1Erection Part 1.2Erection Part 1.3Erection Part 1.4 Forms, Fi
Total Erection Package 1

Erection 1 zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
Erection 1.zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
Total Erect zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
art 1.3Erection Part 1.4 Forms, First fill the associated form then fill this form
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
Grand Summary Package I
-
For this form Cross Form Formula exist in Civil Part 1Total Supply Part ITotal Erection Part I Forms, First fill the associa
Total Civil plus Supply plus Erection of Package I

Civil 1 zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
Total Supp zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
Total Civil zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
Grand Summ zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
Part I Forms, First fill the associated form then fill this form
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
Civil Schedule
Civil Section
Civil Part 2
Design and construction with supply of all required materials for following items as per relevant standards, technical
1 Required GIS BUILDIN LUMPSUM ( 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
IMPORTANT NOTE: (1)Soil data has been provided in bid for reference only.Bidder shall take soil investigation at thei
2. Providing and laying RCC FOUNDATIONS FOR SUPPORT STRUCTURES FOR FOLLOWING EQUIPMENT/TOWER GANT
2.1 Required FOR 400KVNO 24 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.7 Required FOR SUPPONO 258 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.19 Required FOR 66KV NO 6 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.24 Required FOR TRANSF NO 3 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.25 Required FOR BUS RE NO 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.26 Required FOR TRANSF NO 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.27 Required FOR LIGHTNO 4 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required RCC OIL SUM LUMPSUM ( 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4. RCC CABLE TRENCHES/BIG BEN CROSSING with Supply and Erection of Galvenized Rack and Ladder Type Cable Tra
4.1 Required ONE TIER RMT 360 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4.2 Required TWO TIER RMT 230 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4.3 Required THREE TIE RMT 10 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4.4 Required CABLE TREN RMT 18 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4.5 Required CABLE TRESQ. METER 20 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5. RCC FIRE PROTECTION WALL in all respect with latest relavant STANDARDS and CODES and as per requirement of
5.1 Required FOR 400K NO 3 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5.2 Required FOR 220/6NO 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
6. RCC Roads supprted by WBM road( WBM road having Minimum750mm thickness shall consist of GSB layer and W
6.1 Required RCC ROAD-SQ. METER 3400 Required CRequired CurrencyEnter Numeric ValueEnter Positive
6.2 Required RCC ROAD RMT 450 Required CRequired CurrencyEnter Numeric ValueEnter Positive
6.3 Required RCC CROSSNO 20 Required CRequired CurrencyEnter Numeric ValueEnter Positive
7. External Water Supply System (U/G + OH tank) including necessary fixtures,fastenings,valves etc. AS PER RELEVAN
7.1 Required Providing aNO 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
7.2 Required Providing aLUMPSUM ( 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
7.3 "PIPING REQD FOR ABOVE WORK OF VARYING DIAMETER( Water supply line inside the buildings is in the scope o
Providing laying and joining in true line and level UPVC pipe (SCH-40) including fittings of PRINCE/ SUPRIME/ ASTRAL
1 Required u Pvc pipe RMT 300 Required CRequired CurrencyEnter Numeric ValueEnter Positive
8. Septic Tank with Soak Pit and complete drainage system including inspection chamber AS PER CODES AND RELEVA
8.1 Required RCC SEPTICNO 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
8.2 Required Providing 3NO 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
8.3 Required Providing aRMT 200 Required CRequired CurrencyEnter Numeric ValueEnter Positive
8.7 Required Constructi NO 15 Required CRequired CurrencyEnter Numeric ValueEnter Positive
9 Required Supplying SQ. METER 11500 Required CRequired CurrencyEnter Numeric ValueEnter Positive
10 Required Supply andSQ. METER 11500 Required CRequired CurrencyEnter Numeric ValueEnter Positive
SPECIAL NOTE: Billing break up for LUMPSUM(package) items shall be as under. (2) For400kv GIS building, (FOR GF B
SR.NO.: STAGE OF WORK : PERCENTAGE OF PAYMENT TO BE RELEASED
2.1 : Up to plinth level : 15 Percent
2.2 : Up to GF lintel level : 15 Percent
2.3 : Up to GF Slab level :20 percent
2.4 : Masonry up to FF slab level including parapet. : 15 Percent
2.5 : Plastering,Flooring, Door/Window,Painting , False ceiling etc : 20 percent
2.6 : Water supply and Drainage line : 5 percent
2.7 : Completion of building in all respect (The amount will be paid within 60 days against commissioning of sub stati
zero
per relevant standards, technical specifications,special conditions and tender drawings. Bidder shall submit the required design calculation
hall take soil investigation at their own cost and design the civil buildings and foundations for other strcture accordingly as per specification
WING EQUIPMENT/TOWER GANTRY/TRANSFORMER/REACTOR etc of minimum grade M-30 for exposed work including the cost of excavatio
d Rack and Ladder Type Cable Trays of required width and Accessories as per respective Technical Specifications and relevant special conditi
ODES and as per requirement of transformer/Reactor safety Looking to the soil conditions, all Column/Column footing/strcture foundations
s shall consist of GSB layer and WMM layer as per MORT and H specification( minimum thickness of GSB layer shall be 450mm thick but wh
ings,valves etc. AS PER RELEVANT STANDARDS AND CODES.
de the buildings is in the scope of their individual items. This item includes pipe line from water source to O.H. Tank / terrace tank of each
gs of PRINCE/ SUPRIME/ ASTRAL/ FINOLEX or equivelent make or as approved by EIC.Pipe shall be fixed on the wall with the help of clamp
mber AS PER CODES AND RELEVANT STANDARDS. The mimimum Grade of concrete shall be M30. However, Scope of work shall be inclusive
For400kv GIS building, (FOR GF BUILDINGS)
gainst commissioning of sub station only after settlement of material account statement of items supplied, used, erected, and successful co
the required design calculation, drawing for execution for approval prior to execution.
e accordingly as per specification and requirement.GETCO shall pay as per quoted LUMPSUM price only.
rk including the cost of excavation in all sorts of soil/rock/RCC, back filling with non cohesive soil/sand,lean concrete, necessary formwork (
tions and relevant special conditions.Cable trench cover shall be prestressed cover of required thickness.(Minimum thickness of the prestre
mn footing/strcture foundations shall be rested on pile foundation only. Minimum depth of foundation inside ground level shall be as unde
yer shall be 450mm thick but which may be increased as per design requiremnt and minimum thickness of WMM layer shall be 300mm wh
O.H. Tank / terrace tank of each building and water line reuired in switch yard area). Qty considered is on approximate basis. However paym
n the wall with the help of clamp at every 2000mm c/c or shall be concilled or necessary excavation in trenches as directed including necess
, Scope of work shall be inclusive of all the works/items mentioned in Tender drawing/BOQ description, Technical specification and require
used, erected, and successful commissioning of sub station.The amount will be released in final bill only and payment will be made only aft
concrete, necessary formwork ( ply wood shuttering form work and adjustable tubular steel supports), scaffolding in true line and level, po
Minimum thickness of the prestressed cover shall be 50mm). The mimimum Grade of concrete shall be M30 . No seperate payment shall be
ide ground level shall be as under. (2) For pile foundation -- 2000mm cutoff level The mimimum Grade of concrete shall be M30 (Protection
WMM layer shall be 300mm which may increse as per design requirement ) , Minimum thickness of RCC road shall be 300mm. C.D Works,
pproximate basis. However payment shall be made as per actual execution of work.
ches as directed including necessary fittings including testing of pipe and joints and fixing the same with adhesive solvant,including cost of
chnical specification and requirement to complete the work as per relevant IS codes and standards
nd payment will be made only after passing of final bill.): 10 percent

affolding in true line and level, pouring and compacting with machine vibrator,Providing and fixing foundation bolt with templete, grouting
0 . No seperate payment shall be made for making base if any. Protection of RCC structure under ground and above ground against corrsion
oncrete shall be M30 (Protection of RCC structure under ground and above ground against corrsion and weather shall be provided as menti
oad shall be 300mm. C.D Works, Paving and Storm water Drains in all respect shall be provided as per latest relevant STANDARDS.Design of
hesive solvant,including cost of all materials and necessary refilling the trenches,dressing etc complete.
on bolt with templete, grouting of foundation bolts with GP-2 or equivalent high strength non-shrink type material, curing with jute bags o
nd above ground against corrsion and weather shall be provided as mentioned in Technical specification.The cement and steel shall also be
eather shall be provided as mentioned in Technical specification.The cement and steel shall also be considered accordingly.). However,Item
t relevant STANDARDS.Design of WBM road shall be done as per CBR value and other soil data. Yellow earth required for embankment ( ot
material, curing with jute bags on RCC surface etc. complete Including cost of reinforcement.(CRS). (Protection of RCC structure under grou
e cement and steel shall also be considered accordingly.). However,Item Rate and Scope of work shall be inclusive of all the works/items m
red accordingly.). However,Item Rate and Scope of work shall be inclusive of all the works/items mentioned in Tender drawing, BOQ descri
th required for embankment ( other than GSB layer ,WMM layer,bitumnous carpets etc) shall be paid seperately as per actual required on s
tion of RCC structure under ground and above ground against corrsion and weather shall be provided as mentioned in Technical specificati
clusive of all the works/items mentioned in Tender drawing, BOQ description, Technical specification and requirement to complete the wo
d in Tender drawing, BOQ description, Technical specification and requirement to complete the work as per relevant IS codes and standard
ately as per actual required on site. Design of RCC road with WBM road road shall be done as per CBR value, IRC standard, relevant specific
mentioned in Technical specification.The cement and steel shall also be considered accordingly.)..Grade of concrete for pile and pile cap shal
equirement to complete the work as per relevant IS codes and standards. RCC Cable trench shall be supported on pile foundation only. Pay
r relevant IS codes and standards
e, IRC standard, relevant specifications/standards/BOQ description and other soil data. Payment shall be paid as per actual execution. Wid
oncrete for pile and pile cap shall be M30 Looking to the soil conditions, all Column/Column footing/strcture foundations shall be rested on
rted on pile foundation only. Payment shall be made on RMT basis for Item no A,B , C and D and on Sq.Meter basis for item no. E.
aid as per actual execution. Width of road from shoulder to shoulder shall be considered for payment However,Item Rate and Scope of wo
re foundations shall be rested on pile foundation only. Please note that minimum depth of foundation shall be as under (1) For pile foundati
ter basis for item no. E.

ever,Item Rate and Scope of work shall be inclusive of all the works/items mentioned in Tender drawing, BOQ description, Technical specifi
be as under (1) For pile foundation -- 2000mm cutoff level for Tower Gantry foundation and1000mm cutoff level for Equipment support st
OQ description, Technical specification and requirement to complete the work as per relevant IS codes and standards
ff level for Equipment support strcture foundation. However, Item Rate and Scope of work shall be inclusive of all the works/items mention
e of all the works/items mentioned in Tender drawing,BOQ description, cost of Foundation bolt as per approved drawing , cost of Rail piece
roved drawing , cost of Rail pieces for Transformer and rail cum road work,Technical specification and requirement to complete the work as
rement to complete the work as per relevant IS codes and standards.
SUPPLY-1
SUPPLY SCHEDULE
SUPPLY
Supply and Erection of 400kV Switch Yard Equipments considering 31mm/KV creepage distance due to marine atmo
400 KV Indoor GIS Equipment
Supply and Erection of 400kV outdoor Equipments considering 31mm/KV creepage distance due to marine atmosph
2.2 400kV Bus Nos 24 Required Required CRequired CRequired CRequired C
2.3 400kV SF6 Nos 24 Required Required CRequired CRequired CRequired C
2.4 Metering CNos 12 Required Required CRequired CRequired CRequired C
1 Gantry str MT 107 Required Required CRequired CRequired CRequired C
- Gantry struMT 5 Required Required CRequired CRequired CRequired C
2 Lighting MaMT 6.76736 Required Required CRequired CRequired CRequired C
- Lighting MaMT 0.27116 Required Required CRequired CRequired CRequired C
Stringing of Flyover bus with Following Conductor for all the three phases with required Silicon Rubber Insulators, ha
3-B Break Up oRmtr. 186 Required Required CRequired CRequired CRequired C
- 2. Silicon No. 24 Required Required CRequired CRequired CRequired C
- 3.Double TNo. 6 Required Required CRequired CRequired CRequired C
- 5.Spacers No. 36 Required Required CRequired CRequired CRequired C
Droppers (including required suspension string with hardware and accessories, if any) and Jumpers (including Equipm
- 3.Fire WedNo. 72 Required Required CRequired CRequired CRequired C
- 4.Silicon R No. 18 Required Required CRequired CRequired CRequired C
- 5. Single No. 18 Required Required CRequired CRequired CRequired C
Supply and Erection of 220kV Switch Yard Equipments considering 31mm/KV creepage distance due to marine atmo
220 KV Indoor GIS Equipment (Separate Enclosure for Each Phase shall be considered)
220 KV Outdoor Equipments
2.2 220kV Bus Nos. 6 Required Required CRequired CRequired CRequired C
2.3 220kV HighNos 6 Required Required CRequired CRequired CRequired C
2.4 220kV SF6 Nos. 12 Required Required CRequired CRequired CRequired C
2.6 3 X Single Nos. 12 Required Required CRequired CRequired CRequired C
3-B Break Up oRmtr. 211.5 Required Required CRequired CRequired CRequired C
- 3. Double No. 3 Required Required CRequired CRequired CRequired C
- 3.Single S No. 9 Required Required CRequired CRequired CRequired C
Supply and Erection of 66kV Switch Yard Equipments considering 31mm/KV creepage distance due to marine atmos
66 KV GIS Indoor Equipment
1.1 3- Ø 66 kV,Sets 6 Required Required CRequired CRequired CRequired C
1.3 3- Ø 66 kV,Set 1 Required Required CRequired CRequired CRequired C
Supply and Erection of 66kV outdoor Equipments considering 31mm/KV creepage distance due to marine atmosphe
2.4 66kV SF6 tNos. 6 Required Required CRequired CRequired CRequired C
Supply and Erection of Galvanised Structure /Material for 66kV Switch Yard suitable to marine atmosphere (as per re
3-B Break Up oRmtr. 423 Required Required CRequired CRequired CRequired C
- 3.Single S No. 6 Required Required CRequired CRequired CRequired C
age distance due to marine atmosphere of site (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus

distance due to marine atmosphere of site as per respective technical specifications suitable for 2 Bus system.
ired Silicon Rubber Insulators, hardwares and accessories, spacers provided at every 5.0 mtr. interval (Suitable for 450mm spacing)etc. com
y) and Jumpers (including Equipment to Equipment) with Following conductor as per standards and approved drawings with provision of re
age distance due to marine atmosphere of site (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus


e distance due to marine atmosphere of site (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus

istance due to marine atmosphere of site as per respective technical specifications suitable for 2 Bus system.
to marine atmosphere (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus scheme. Only structur
zero
ial conditions ) suitable for 2 Bus system
ial conditions ) suitable for 2 Bus system

ble for 350mm spacing)etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement.
for 2 Bus scheme. Only structure drawings of gantry structures shall be issued by GETCO. However, other details required for fabrication o
ble for 350mm spacing)etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement.
ontinuous Bus Arrangement


SUPPLY-1
SUPPLY SCHEDULE
SUPPLY
G EOT Crane Nos.

( 1 Required Required CRequired CRequired CRequired C
H VentilationLump sum 1 Required Required CRequired CRequired CRequired C
Supply and installation of Portable and wheel/trolley mounted fire extinguishers for Control room, 400kV GIS Hall, R
1 1) Dry chemNos 5 Required Required CRequired CRequired CRequired C
2 2) Dry chemNo. 3 Required Required CRequired CRequired CRequired C
3 3) Dry chemNo. 3 Required Required CRequired CRequired CRequired C
4 4) Carbon dNo. 7 Required Required CRequired CRequired CRequired C
5 5) Carbon dNo. 5 Required Required CRequired CRequired CRequired C
6 6) MechanicNo. 3 Required Required CRequired CRequired CRequired C
7 7) MechaniNo. 3 Required Required CRequired CRequired CRequired C
Supply and installation of Tower/Split Air Conditioner Machine at following Locations.
1 3 Ton CapacNos. 10 Required Required CRequired CRequired CRequired C
2 3 Ton CapaNos. 1 Required Required CRequired CRequired CRequired C
Supply and Erection of General purpose equipments and materials as per respective technical specifications and rele
A N N E X U R E A Major Spares and Tools and Tackles
Note: Bidder has to quote against the following spares as applicable. Quantities against the spares shall be finalized
General
1.1 SF6 gas Pr Nos. 3 Required Required CRequired CRequired CRequired C
1.5 All types Nos. 3 Required Required CRequired CRequired CRequired C
1.6 Covers/ShieSet 1 Required Required CRequired CRequired CRequired C
1.8 Each type oSet 1 Required Required CRequired CRequired CRequired C
1.9 SF6 to air Nos. 3 Required Required CRequired CRequired CRequired C
For GIS 400 kV Circuit Breaker
2.1 Complete CNo. 1 Required Required CRequired CRequired CRequired C
2.2 Trip coil Nos. 6 Required Required CRequired CRequired CRequired C
2.3 Closing co Nos. 3 Required Required CRequired CRequired CRequired C
For GIS 400 kV ISOLATORS
3.1 Complete se Nos. 3 Required Required CRequired CRequired CRequired C
3.2 High speed/ No. 1 Required Required CRequired CRequired CRequired C
3.3 Single phasNo. 1 Required Required CRequired CRequired CRequired C
For GIS 400 KV CURRENT TRANSFORMER
For GIS 400kV Potential Transformer
5.1 Gas Insula No. 1 Required Required CRequired CRequired CRequired C
Spares for E O T crane
6.1 Hoist MotoNo. 1 Required Required CRequired CRequired CRequired C
6.2 C.T. Motor No. 1 Required Required CRequired CRequired CRequired C
6.3 L.T.Motor No. 1 Required Required CRequired CRequired CRequired C
Spares for 66kV GIS
General
1.1 SF6 gas Pr Nos. 3 Required Required CRequired CRequired CRequired C
1.2 SF6 PressuNos. 3 Required Required CRequired CRequired CRequired C
1.5 All types Nos. 3 Required Required CRequired CRequired CRequired C
1.6 Covers/Shie Set 1 Required Required CRequired CRequired CRequired C
1.8 Each type Set 1 Required Required CRequired CRequired CRequired C
For GIS 66 kV Circuit Breaker
2.1 Complete CNo. 1 Required Required CRequired CRequired CRequired C
2.2 Trip coil Nos. 2 Required Required CRequired CRequired CRequired C
2.3 Closing co Nos. 1 Required Required CRequired CRequired CRequired C
For GIS 66 kV ISOLATORS
3.1 Complete se Nos. 1 Required Required CRequired CRequired CRequired C
3.2 High speed/ No. 1 Required Required CRequired CRequired CRequired C
3.3 Three phase No. 1 Required Required CRequired CRequired CRequired C
For GIS 66 KV CURRENT TRANSFORMER
For GIS 66kV Potential Transformer
5.1 Gas Insula No. 1 Required Required CRequired CRequired CRequired C
Display Boards and others
1 Single lin Set 1 Required Required CRequired CRequired CRequired C
2 Gas Single Set 1 Required Required CRequired CRequired CRequired C
3 Key board Set 1 Required Required CRequired CRequired CRequired C
I Providing No. 70 Required Required CRequired CRequired CRequired C
J : Supply and installation of materials for Illumination system in all respect as per respective specifications and spec
Indoor Illumination
2 Toilets Package 1 Required Required CRequired CRequired CRequired C
3 AHU RoomPackage 1 Required Required CRequired CRequired CRequired C
4 LV Room Package 1 Required Required CRequired CRequired CRequired C
5 Battery R Package 1 Required Required CRequired CRequired CRequired C
5 Supply andNos 1 Required Required CRequired CRequired CRequired C
Supply and installation of materials for Earthing system in all respect as per respective specifications and special con
Supply and Installation of earthing strips/round bars as shown below including digging of 600 mm depth and 450 mm
1 a) 75 x 10 RMt. 6300 Required Required CRequired CRequired CRequired C
2 b) 50 x 6 mRMt. 1000 Required Required CRequired CRequired CRequired C
3 c) 40 mm diRMt. 6000 Required Required CRequired CRequired CRequired C
4 d) 40mm diNos. 60 Required Required CRequired CRequired CRequired C
5 e) 25X3mmRMt. 5000 Required Required CRequired CRequired CRequired C
2 Providing aNos. 1 Required Required CRequired CRequired CRequired C
3 Supply, In Nos. 75 Required Required CRequired CRequired CRequired C
4 Providing Nos. 75 Required Required CRequired CRequired CRequired C
7 Supply andRmtr.
Erection of Ladder
450Type
Required
Cable Trays
Required
and Accessories
CRequired CRequired
as per respective
CRequiredTechnical
C Specifications
- 350mm Rmtr. 200 Required Required CRequired CRequired CRequired C
SPECIAL NOTES:
Supply and Erection of any 400/220kV and 220/66kV Transformers are not in the scope of bidder, but bidder will ere
Cable sealing end with termination kit suitable for 3 Run 3CX500sq.mm XLPE cable for line bays are in the scope of G
Lightning Masts shall be provided for Switchyard area etc. as per DSLP Calculation. Lightning protection of Buildings
Submission of study report of Very Fast Transient Over Voltage (VFTO) shall be in the scope of bidder.
Successful bidder has to depute his expert to visit site annually for the period of five years from the date of commiss
LCC of 400,220 and 66kV GIS shall be front openable. LCC shall be installed in such a way that facing of front side of
Mounting channels to be grouted in flooring for GIS support shall be designed and verified by GIS OEM only.
Perforated GI tray along with GI cover shall be considered for supporting cables on GIS module also up to cable trenc
5 MVA 33/11 KV Station Transformer and 11kV/415V Distribution Transformers shall be painted with anti-corrosive P
All the GIS Equipment structure, GIB duct supoort str. and outdoor equipment structures, Gantry structures and LM

Control room, 400kV GIS Hall, Relay panel room of GIS Hall,Transformers,Reactors and other Strategic locations as per Technical Specificati

technical specifications and relevant special conditions.
nst the spares shall be finalized during detailed Engineering and bidder has to supply the same. If any item not quoted against spares, but







spective specifications and special conditions (Important Note: Concealed wiring shall be considered for Indoor Illumination)

ve specifications and special conditions (Successful bidder has to submit the complete design and BOQ for approval)
ng of 600 mm depth and 450 mm wide trench fixing on structure as per std equipment earthing philosophy including fixing arrangement w
ope of bidder, but bidder will erect the items other than the scope of transformer manufacturer and witness during the erection and testin
or line bays are in the scope of GIS manufacturer.It shall be installed in co-ordination with cable laying agency by EPC contractor.
ightning protection of Buildings shall be provided as per IS 2309.
e scope of bidder.
years from the date of commissioning to inspect GIS for carrying out status evaluation of GIS performance.This is intended to share the op
way that facing of front side of LCC and GIS module is same. Opposite to LCC panel, CandR panels shall be arranged exactly in line with GIS
erified by GIS OEM only.
GIS module also up to cable trench.
be painted with anti-corrosive PU based paint having minimum 50 micron coating. considering saline atmosphere.
tures, Gantry structures and LM structures shall have GI coating considering marine atmosphere as per specifications.
zero
tions as per Technical Specification.
not quoted against spares, but required during detailed engineering shall be supplied by the successful bidder at no extra cost to GETCO.
door Illumination)
y including fixing arrangement with two bolt arrangement, jointing, welding etc. complete.
ss during the erection and testing of the same and provide all the result in as built drawings/documents.
ncy by EPC contractor.
e.This is intended to share the operational challenges and confirming the maintenances followed by GETCO.
arranged exactly in line with GIS module. Sufficient maintenance space shall be kept between LCC and CandR panel.
dder at no extra cost to GETCO.
SUPPLY-1
SUPPLY SCHEDULE
SUPPLY

A. Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical s
1.6 Busbar ProtSet 1 Required Required CRequired CRequired CRequired C
2 Supply, InsJob 1 Required Required CRequired CRequired CRequired C
B. Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical s
1.4 Busbar ProtSet 1 Required Required CRequired CRequired CRequired C
C. Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical s
1. Control and Protection panels for 66KV Bays ( Control Voltage - 220V DC ) as per tech specifications and suitable fo
D. Supply, Erection, Testing and Commissioning of General purpose equipments and materials as per respective tech
1 Battery setNo. 2 Required Required CRequired CRequired CRequired C
2 Battery ChaNo. 2 Required Required CRequired CRequired CRequired C
E. Supply, Installation, Testing and Commissioning of materials/item for Power Cable and Control Cable including pre
1. Supply and Laying of 1.1 kV FRLSH PVC armoured copper/Aluminum control/LT power cable in trench including bi
1.3 4cx2.5 mm2 LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.7 12c x 4 mmLUMPSUM 1 Required Required CRequired CRequired CRequired C
1.1 A) 1 x 50 LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.1 B) 4C x 10 LUMPSUM 1 Required Required CRequired CRequired CRequired C
1.11 4 x 10 mm2LUMPSUM 1 Required Required CRequired CRequired CRequired C
2 Supply, EreLUMPSUM 1 Required Required CRequired CRequired CRequired C
3.1 400 kV swiMtr. 40 Required Required CRequired CRequired CRequired C
3.2 220 kV SwiMtr. 15 Required Required CRequired CRequired CRequired C
Providing and fixing of all weather proof, cold rolled sheet steel junction box for CVT and PT, CT terminations with 30
4.1 CVT JB No. 4 Required Required CRequired CRequired CRequired C
Note:
1. Battery and Charger sizings are tentative as they are derived on the basis of available data of trip coil, LCC, DC Driv
$ Quantity and size of cables shall be derived by bidder based on GIS and LCC requirement. Typical philosophies are
@ Being a Solar Generation pooling Substation, Under frequency protection will not be applicable, hence panel is no
Supply, Erection, Testing and Commissioning of SCADA equipments and materials as per respective technical specific
1 Ethernet FNos 10 Required Required CRequired CRequired CRequired C
4 Armoured M F TR. 1000 Required Required CRequired CRequired CRequired C
5 Bay ControlNos 1 Required Required CRequired CRequired CRequired C
Note:
1) Any material/equipment accessories which are not listed in BOQ or scope of supply but required to complete the
2)Ethernet switches shall have as many spare ports as utilized ports. If two Ethernet Switches are provided in place o
3) PLCC / FOTE BCU shall have sufficient I/Os as per given list considering future lines also.
4) BCU for station Auxiliary shall have sufficient I/Os as per list or otherwise suitable RTU shall be provided.
5) Contractor shall be responsible for necessary co-ordination with FOTE and OPGW supplier and erection agency to
6) Quantity shall be sufficient to accommodate all spares as per spare list.
Termination of the Control and Power cable at panel / MK box/equipment including PVC binding, dressing, shaping,
- 1.1) cablesLumsum 1 Required Required CRequired CRequired CRequired C
- 2.2) cablesLumsum 1 Required Required CRequired CRequired CRequired C
Laying of 1.1kv FRLSH PVC/XLPE armored Al. LT power cable in ground by digging trench of suitable width and 450 m
- 1.1) ControLumsum 1 Required Required CRequired CRequired CRequired C
- 2. 2) ContrLumsum 1 Required Required CRequired CRequired CRequired C
ials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 66kV side
ech specifications and suitable for GIS switchgear modules with following break up
materials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 400kV and 66
and Control Cable including preparation of wiring schedule on the basis of GIS/HYBRID and LCC requirement and referring to typical philo
ower cable in trench including binding/clamping of cable with PVC locable wire tie as per requirement including supply and fixing of identifi
s and couplings for control cable of PT/CVT etc. equipments including fixing with structures up to plinth level as per instruction of Engineer
and PT, CT terminations with 30 Nos. of disconnecting type, Elmex - make CATDM 4 or equivalent type connectors and required no of fuse
ble data of trip coil, LCC, DC Drives, GIS Module etc. Bidder has to derive Battery and Charger sizing based on their GIS component rating a
ement. Typical philosophies are for reference only. However basic requirements like, 4 Sq.mm cable for CT, PT and 2.5 Sq.mm for Control w
be applicable, hence panel is not cosnidered.
per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 400kV and 66kV and Two
ply but required to complete the job shall be included and shown in technical bid.
Switches are provided in place of one Ethernet Switch to (satisfy port requirements) as per tender drawings/documents then provided two
RTU shall be provided.

supplier and erection agency to establish remote connectivity and over all operation from Master Control Centre through SCADA system.
PVC binding, dressing, shaping, drilling of holes in panels for glands nuts, providing of glands for following size. The work also includes loop
ench of suitable width and 450 mm depth with providing and fixing of brick and sand layer covering the cable in any type of soil and Laying
zero
ain Bus system on 400kV and 66kV side and Two Main Bus with Sectionaliser system on 220kV and 33kV side
ent and referring to typical philosophy. However, final Cable philosophy shall be derived during detailed engineering and got approved. (Ple
uding supply and fixing of identification tags at both ends and at distance of every 100mtr. (Note :- Aluminium cables of size 185 mm2 and a
el as per instruction of Engineer-in-charge.
nnectors and required no of fuses, links etc.as per instruction of Engineer-in-charge.
on their GIS component rating and design and accordingly it shall be quoted (Size not less than shown in BOQ). Battery and charger sizing s
PT and 2.5 Sq.mm for Control wiring is to be followed as per philosophy. Also, 1CX150 size cables for incoming AC supply are to be conside
m on 400kV and 66kV and Two Main with Bus sectionalizer on 220kV and 33kV side
gs/documents then provided two switches shall be considered as single switch.
Centre through SCADA system.
size. The work also includes looping in Panel and MK box by using crimping type lugs of suitable size with ferruling (machine printed) with
ble in any type of soil and Laying of 1.1kv PVC armored copper control cable in heavy duty PVC pipe of suitable size buried in ground by digg
gineering and got approved. (Please refer Remarks)
um cables of size 185 mm2 and above shall be XLPE type)
OQ). Battery and charger sizing shall be got approved during detailed engineering before finalization. Accordingly dimensions of LV Room, B
ming AC supply are to be considered as per rating of LT Panel board. Other than GIS-LCC - Panel cables, typical philosophies may be referred
erruling (machine printed) with proper size of copper cable wire. The loops should be bunched by using button tape and proper shaping et
able size buried in ground by digging trench of suitable width and 450 mm depth in any type of soil including supply and fixing of Pipe and i
rdingly dimensions of LV Room, Battery room etc. shall be finalized.
cal philosophies may be referred.
utton tape and proper shaping etc.
ng supply and fixing of Pipe and identification tags at distance of every 100 Mtrs for following size
SUPPLY-1
SUPPLY SCHEDULE
SUPPLY
FOTE BOQ for Dholera Substation: Part-2 (GETCO Scope) for GUVNL (400kV Side)
A. SDH FOTE - STM-4 system with following configuration. Approved Make: ABB India Ltd, Type: FOTE: FOX 615 and D
1 19 Rack witNos 3 Required Required CRequired CRequired CRequired C
2. Existing Available DC Supply Source
2.1 Suitable r Nos 6 Required Required CRequired CRequired CRequired C
3 Control CaNos 6 Required Required CRequired CRequired CRequired C
4 4 Port OLTENos 6 Required Required CRequired CRequired CRequired C
5 Optical FibNos 16 Required Required CRequired CRequired CRequired C
6 Stand alonNos 16 Required Required CRequired CRequired CRequired C
7 8 Ports of Nos 6 Required Required CRequired CRequired CRequired C
8 8 Ports 10 Nos 6 Required Required CRequired CRequired CRequired C
9 8 Ports - R Nos 3 Required Required CRequired CRequired CRequired C
10 4 Port OptiNos 6 Required Required CRequired CRequired CRequired C
11 Fiber Distr Nos 3 Required Required CRequired CRequired CRequired C
B. Mandatory Spares for FOTE
1 Existing AvNos 1 Required Required CRequired CRequired CRequired C
Note:
(1) LCT (Local Craft Terminal- Laptop) with EMS software shall have to be supplied by Manufacturer free of cost for lo
OEM will have to submit confirmation in written for following.
(1) The bidder shall furnish the copies of valid type test reports for the offered equipment from NABL accredited Lab
(2) The bidder should have to confirm for guarantee of 5 years from the date of receipt of equipment in store in goo
(3) The bidder should have to confirm the service and spares support for at least 10 years after the guarantee period
FOTE BOQ for Dholera Substation: Part-2 (GETCO Scope) for GUVNL (220 kV Side)
A. SDH FOTE - STM-4 system with following configuration. Approved Make: ABB India Ltd, Type: FOTE: FOX 615 and D
1 19 Rack witNos 2 Required Required CRequired CRequired CRequired C
2. Existing Available DC Supply Source
2.1 Suitable r Nos 4 Required Required CRequired CRequired CRequired C
9 8 Ports - R Nos 2 Required Required CRequired CRequired CRequired C
11 Fiber Distr Nos 2 Required Required CRequired CRequired CRequired C
B. Mandatory Spares for FOTE
1 Existing AvNos 1 Required Required CRequired CRequired CRequired C
Note:
(1) LCT (Local Craft Terminal- Laptop) with EMS software shall have to be supplied by Manufacturer free of cost for lo
OEM will have to submit confirmation in written for following.
(1) The bidder shall furnish the copies of valid type test reports for the offered equipment from NABL accredited Lab
(2) The bidder should have to confirm for guarantee of 5 years from the date of receipt of equipment in store in goo
(3) The bidder should have to confirm the service and spares support for at least 10 years after the guarantee period
Communication BOQ for 400KV/220KV Dholera GIS Sub-station:Part-2 (GETCO Scope) for GUVNL
BOQ- 400KV Side
1 400 kV Lin No. 12 Required Required CRequired CRequired CRequired C
2 400 kV metNo. 9 Required Required CRequired CRequired CRequired C
BOQ- 220KV Side
1 220kV CVTNo. 2 Required Required CRequired CRequired CRequired C
2 FSK Data MNo. 1 Required Required CRequired CRequired CRequired C
3 FSK Data MNo. 1 Required Required CRequired CRequired CRequired C
4 PLCC Exchan No. 1 Required Required CRequired CRequired CRequired C
5. DAS Meters network wiring, testing and commissioning for meter data polling to DAS PC of sub-station (Complete
a) 3 core comm Mtr. 1000 Required Required CRequired CRequired CRequired C
b) RS 485 to RNo. 1 Required Required CRequired CRequired CRequired C
c) RS 485 to No. 6 Required Required CRequired CRequired CRequired C
d) Ethernet FiNo. 3 Required Required CRequired CRequired CRequired C
e) Line Interf No. 3 Required Required CRequired CRequired CRequired C
f) Armoured M F tr. 1000 Required Required CRequired CRequired CRequired C
a Ltd, Type: FOTE: FOX 615 and Digital Teleprotection Equipment: NSD-570 / Make: GE TandD India Ltd, FOTE: Type: eterragridcom e-DXC e


y Manufacturer free of cost for local as well as remote configuration of FOTE equipment.
pment from NABL accredited Laboratory or KEMA type tested.

ipt of equipment in store in good condition or three years from the date of commissioning of offered FOTE (Operational for Speech+DATA+
years after the guarantee period.
a Ltd, Type: FOTE: FOX 615 and Digital Teleprotection Equipment: NSD-570 / Make: GE TandD India Ltd, FOTE: Type: eterragridcom e-DXC e


y Manufacturer free of cost for local as well as remote configuration of FOTE equipment.
pment from NABL accredited Laboratory or KEMA type tested.

ipt of equipment in store in good condition or three years from the date of commissioning of offered FOTE (Operational for Speech+DATA+
years after the guarantee period.
e) for GUVNL


DAS PC of sub-station (Complete Job)
zero
TE: Type: eterragridcom e-DXC each with 19 inch Rack with 2 tier sub rack arrangement with B155/622 Boards connected back to back ove
(Operational for Speech+DATA+Protection + Remote SCADA over OPGW) at respective Sub-station which ever will be earlier.
TE: Type: eterragridcom e-DXC each with 19" Rack with 2 tier sub rack arrangement with B155/622 Boards connected back to back over ST
(Operational for Speech+DATA+Protection + Remote SCADA over OPGW) at respective Sub-station which ever will be earlier.
ards connected back to back over STM-4) and Digital Teleprotection equipment: eterragridcom DIP.
ever will be earlier.
connected back to back over STM-4) and Digital Teleprotection equipment: eterragridcom DIP.
ever will be earlier.
Erection Schedule
Erection-1
Erection
A. Supply and Erection of 400kV Switch Yard Equipments considering 31mm/KV creepage distance due to marine atm
1. 400 KV Indoor GIS Equipment
2. Supply and Erection of 400kV outdoor Equipments considering 31mm/KV creepage distance due to marine atmos
2.2 Required 400kV Bus Nos. 24 Required CRequired CurrencyEnter Numeric ValueEnter Positive
B . Supply and Erection of Galvanised Structure /Material for 400kV Switch Yard suitable to marine atmosphere (as p
1 Required Gantry struMT 112 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required Lighting MaMT 7.03852 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3. Stringing of Flyover bus with Following Conductor for all the three phases with required Silicon Rubber Insulators,
3.1 Required Twin AL59(6 Rmtr. 93 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4. Droppers (including required suspension string with hardware and accessories, if any) and Jumpers (including Equ
4.1 Required Twin AL59(RMtr 576 Required CRequired CurrencyEnter Numeric ValueEnter Positive
C. Supply and Erection of 220kV Switch Yard Equipments considering 31mm/KV creepage distance due to marine atm
1. 220 KV Indoor GIS Equipment (Separate Enclosure for Each Phase shall be considered)
2. 220 KV Outdoor Equipments
2.2 Required 220kV Bus Nos. 6 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.3 Required 220kV HighNos. 6 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.6 Required 3 X Single Nos. 12 Required CRequired CurrencyEnter Numeric ValueEnter Positive
D. Supply and Erection of Galvanised Structure /Material for 220kV Switch Yard suitable to marine atmosphere (as p
2. Stringing of Flyover bus with Following Conductor for all the three phases with required Silicon Rubber Insulators,
2.1 Required Twin AL59(6 Rmtr. 105.75 Required CRequired CurrencyEnter Numeric ValueEnter Positive
E. Supply and Erection of 66kV Switch Yard Equipments considering 31mm/KV creepage distance due to marine atm
1. 66 KV GIS Indoor Equipment
1.1 Required 3- Ø 66 kV,Sets 6 Required CRequired CurrencyEnter Numeric ValueEnter Positive
1.3 Required 3- Ø 66 kV,Set 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2. Supply and Erection of 66kV outdoor Equipments considering 31mm/KV creepage distance due to marine atmosp
2.4 Required 66kV SF6 tNos. 6 Required CRequired CurrencyEnter Numeric ValueEnter Positive
F. Supply and Erection of Galvanised Structure /Material for 66kV Switch Yard suitable to marine atmosphere (as per
2 . Stringing of Flyover bus with Following Conductor for all the three phases with required Silicon Rubber Insulators
2.1 Required Twin AL59(Rmtr. 211.5 Required CRequired CurrencyEnter Numeric ValueEnter Positive
zero
epage distance due to marine atmosphere of site (as per respective Technical Specifications and relevant special conditions ) suitable for 2 B

ge distance due to marine atmosphere of site as per respective technical specifications suitable for 2 Bus system.
able to marine atmosphere (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus scheme. Only stru
quired Silicon Rubber Insulators, hardwares and accessories, spacers provided at every 5.0 mtr. interval (Suitable for 450mm spacing)etc. co
any) and Jumpers (including Equipment to Equipment) with Following conductor as per standards and approved drawings with provision o
epage distance due to marine atmosphere of site (as per respective Technical Specifications and relevant special conditions ) suitable for 2 B


able to marine atmosphere (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus scheme. Only stru
quired Silicon Rubber Insulators, hardwares and accessories, spacers provided at every 5.0 mtr. interval (Suitable for 350mm spacing)etc. co
page distance due to marine atmosphere of site (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bu

e distance due to marine atmosphere of site as per respective technical specifications suitable for 2 Bus system.
le to marine atmosphere (as per respective Technical Specifications and relevant special conditions ) suitable for 2 Bus scheme. Only struct
equired Silicon Rubber Insulators, hardwares and accessories, spacers provided at every 5.0 mtr. interval (Suitable for 350mm spacing)etc. c
pecial conditions ) suitable for 2 Bus system
able for 2 Bus scheme. Only structure drawings of gantry structures shall be issued by GETCO. However, other details required for fabricati
itable for 450mm spacing)etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement
pecial conditions ) suitable for 2 Bus system

able for 2 Bus scheme. Only structure drawings of gantry structures shall be issued by GETCO. However, other details required for fabricatio
itable for 350mm spacing)etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement.
cial conditions ) suitable for 2 Bus system
ble for 2 Bus scheme. Only structure drawings of gantry structures shall be issued by GETCO. However, other details required for fabrication
uitable for 350mm spacing)etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement.
her details required for fabrication of gantry structures shall be developed by bidder at no extra cost.
r continuous Bus Arrangement

her details required for fabrication of gantry structures shall be developed by bidder at no extra cost.
r continuous Bus Arrangement.
r details required for fabrication of gantry structures shall be developed by bidder at no extra cost.
or continuous Bus Arrangement.

Erection Schedule
Erection-1
Erection
G. EOT Carane
( 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
H. Ventilation system (for maintaining positive pressure) shall be provided for following building as per Technical Spe
1 Required 400KV GIS Lump sum 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
I. Supply and installation of materials for Illumination system in all respect as per respective specifications and specia
Indoor Illumination
1. Providing and Fixing of Energy Efficient LED type (Techhnical spec Cl No. 2.10.4.8-I LED 3 type) Indoor decorative l
1 Required Meeting R Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.1 Required WCs Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.2 Required Toilets Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.3 Required AHU RoomPackage 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.4 Required LV Room Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2.5 Required Battery R Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3. Providing and Fixing of Energy Efficient LED type (Techhnical spec Cl No. 2.10.4.8-I LED4 Type) Indoor decorative lu
3.1 Required 400KV GIS Package 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required Supply andNos 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
J. Supply and installation of materials for Earthing system in all respect as per respective specifications and special co
1. Supply and Installation of earthing strips/round bars as shown below including digging of 600 mm depth and 450
1.1 Required 75 x 10 mmRMt. 6300 Required CRequired CurrencyEnter Numeric ValueEnter Positive
1.2 Required 50 x 6 mm RMt.
G 1000 Required CRequired CurrencyEnter Numeric ValueEnter Positive
1.3 Required 40 mm diaRMt. 6000 Required CRequired CurrencyEnter Numeric ValueEnter Positive
1.4 Required 40mm dia N 3 os. 60 Required CRequired CurrencyEnter Numeric ValueEnter Positive
1.5 Required 25X3mm GIRMt. 5000 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required Providing aNos. 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required Supply, In Nos. 75 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4 Required Providing Nos. 75 Required CRequired CurrencyEnter Numeric ValueEnter Positive
K. Supply and Erection of Ladder Type Cable Trays and Accessories as per respective Technical Specifications and rele
Width of tray
1 Required 450mm Rmtr. 450 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required 350mm Rmtr. 200 Required CRequired CurrencyEnter Numeric ValueEnter Positive
SPECIAL NOTES:
1. Supply and Erection of any 400/220kV and 220/66kV Transformers are not in the scope of bidder, but bidder will e
2. Cable sealing end with termination kit suitable for 3 Run 3CX500sq.mm XLPE cable for line bays are in the scope o
3.Lightning Masts shall be provided for Switchyard area etc. as per DSLP Calculation. Lightning protection of Building
4. Submission of study report of Very Fast Transient Over Voltage (VFTO) shall be in the scope of bidder.
5. Successful bidder has to depute his expert to visit site annually for the period of five years from the date of comm
6. LCC of 400,220 and 66kV GIS shall be front openable. LCC shall be installed in such a way that facing of front side o
7. Mounting channels to be grouted in flooring for GIS support shall be designed and verified by GIS OEM only.
8. Perforated GI tray along with GI cover shall be considered for supporting cables on GIS module also up to cable tre
9. 5 MVA 33/11 KV Station Transformer and 11kV/415V Distribution Transformers shall be painted with anti-corrosiv
10. All the GIS Equipment structure, GIB duct supoort str. and outdoor equipment structures, Gantry structures and
PLCC BOQ
400KV
1 Required 400 kV Lin Nos 12 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required 400 kV metNos 9 Required CRequired CurrencyEnter Numeric ValueEnter Positive
220KV
1 Required 220kV CVTNo. 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required FSK Data MNo. 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required FSK Data MNo. 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4 Required PLCC Exchan No. 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required DAS MetersMtr. 1000 Required CRequired CurrencyEnter Numeric ValueEnter Positive
6 Required b) RS 485 tNo. 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
7 Required c) RS 485 No 6 Required CRequired CurrencyEnter Numeric ValueEnter Positive
8 Required d) EthernetNo 3 Required CRequired CurrencyEnter Numeric ValueEnter Positive
9 Required e) Line Int No. 3 Required CRequired CurrencyEnter Numeric ValueEnter Positive
10 Required f) ArmoureMtr. 1000 Required CRequired CurrencyEnter Numeric ValueEnter Positive
FOTE : 400kv
1 Required Installatio Nos 3 Required CRequired CurrencyEnter Numeric ValueEnter Positive
FOTE : 220KV
1 Required Installatio Nos 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
zero
ing building as per Technical Specifications
pective specifications and special conditions (Important Note: Concealed wiring shall be considered for Indoor Illumination)
I LED 3 type) Indoor decorative luminaries as per design calculation, with respect to required lux level and relevant tender drgs.as per techn
I LED4 Type) Indoor decorative luminaries as per design calculation, with respect to required lux level and relevant tender drgs., and requir
tive specifications and special conditions (Successful bidder has to submit the complete design and BOQ for approval)
gging of 600 mm depth and 450 mm wide trench fixing on structure as per std equipment earthing philosophy including fixing arrangemen
Technical Specifications and relevant special conditions.

scope of bidder, but bidder will erect the items other than the scope of transformer manufacturer and witness during the erection and tes
e for line bays are in the scope of GIS manufacturer.It shall be installed in co-ordination with cable laying agency by EPC contractor.
Lightning protection of Buildings shall be provided as per IS 2309.
the scope of bidder.
five years from the date of commissioning to inspect GIS for carrying out status evaluation of GIS performance.This is intended to share the
h a way that facing of front side of LCC and GIS module is same. Opposite to LCC panel, CandR panels shall be arranged exactly in line with
d verified by GIS OEM only.
n GIS module also up to cable trench.
all be painted with anti-corrosive PU based paint having minimum 50 micron coating. considering saline atmosphere.
ructures, Gantry structures and LM structures shall have GI coating considering marine atmosphere as per specifications.



door Illumination)
relevant tender drgs.as per technical spec. Scope also includes providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex-
elevant tender drgs., and required industrial grade point wiring as per technical spec. Scope also includes providing and fixing of 15/5 A plu
or approval)
phy including fixing arrangement with two bolt arrangement, jointing, welding etc. complete.
ness during the erection and testing of the same and provide all the result in as built drawings/documents.
gency by EPC contractor.
nce.This is intended to share the operational challenges and confirming the maintenances followed by GETCO.
be arranged exactly in line with GIS module. Sufficient maintenance space shall be kept between LCC and CandR panel.
specifications.
e Emergency Light, Bell, Fan, Ex- Fan, DC Point,Occupancy and Light Level Sensor with requisite MCBs and DC 100W lamp , DC Plug etc all it
providing and fixing of 15/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point,Occupancy and Light Level Sensor with requisite M
CandR panel.
DC 100W lamp , DC Plug etc all items as per Ann-4 in following rooms (with safety device ELCB)
MCBs and DC 100W lamp , DC Plug etc all items as per Ann-4 in following rooms (with safety device ELCB)
ght Level Sensor with requisite MCBs and DC 100W lamp , DC Plug etc all items as per Ann-4 in following rooms (with safety device ELCB)
ooms (with safety device ELCB)
Erection Schedule
Erection-1
Erection
- Required 2) Control Set 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 6) Busbar PSet 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required Supply, InsJob 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 4) Busbar PSet 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Supply, Erection, Testing and Commissioning of General purpose equipments and materials as per respective technic
1 Required Battery setNos 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required Battery ChaNo. 2 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required DCDB-220 N Vos 4 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4 Required DCDB-220 N Vo. 4 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required SCADA comp Nos 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Supply, Installation, Testing and Commissioning of materials/item for Power Cable and Control Cable including prepa
1 Required Supply andLS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 2) 2c x 4 LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 3) 4cx2.5 LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 5) 7c x 2. LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 10A) 1 x 5 LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 10B) 4C x LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 11) 4 x 10 LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 12) 3.5 x LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 15) 1C x 1 LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
2 Required Termination LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 2) cables aLS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3 Required Laying of 1LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 2) Control LS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
3.1 Required Supply, EreLS 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4 Required Providing aMtr. 40 Required CRequired CurrencyEnter Numeric ValueEnter Positive
- Required 2) 220 kV Mtr. 15 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Note: Battery and Charger sizings are tentative as they are derived on the basis of available data of trip coil, LCC, DC
"SCADA BOQ of 400kV Dholera Sub-Station
A-Supply, Erection, Testing and Commissioning of SCADA equipments and materials as per respective technical spec
1 Required Ethernet FNos 10 Required CRequired CurrencyEnter Numeric ValueEnter Positive
4 Required Armoured M F TR. 1000 Required CRequired CurrencyEnter Numeric ValueEnter Positive
5 Required Bay ControlNos 1 Required CRequired CurrencyEnter Numeric ValueEnter Positive
Note:1) Any material/equipment accessories which are not listed in BOQ or scope of supply but required to complet
zero
s as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 400kV side
s as per respective technical specifications and relevant special conditions and suitable for Two Main Bus with Sectionaliser system on 220k
s as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 66kV side
aterials as per respective technical specifications and relevant special conditions and suitable for Two Main Bus system on 400kV and 66kV
nd Control Cable including preparation of wiring schedule on the basis of GIS/HYBRID and LCC requirement and referring to typical philosop
vailable data of trip coil, LCC, DC Drives, GIS Module etc. Bidder has to derive Battery and Charger sizing based on their GIS component ratin
f supply but required to complete the job shall be included and shown in technical bid. 2)Ethernet switches shall have as many spare ports
ystem on 400kV side
with Sectionaliser system on 220kV side
ystem on 66kV side
n Bus system on 400kV and 66kV side and Two Main Bus with Sectionaliser system on 220kV and 33kV side
t and referring to typical philosophy. However, final Cable philosophy shall be derived during detailed engineering and got approved. (Pleas
sed on their GIS component rating and design and accordingly it shall be quoted (Size not less than shown in BOQ). Battery and charger sizi
stem on 400kV and 66kV and Two Main with Bus sectionalizer on 220kV AND 33kV side
s shall have as many spare ports as utilized ports. If two Ethernet Switches are provided in place of one Ethernet Switch to (satisfy port requ
neering and got approved. (Please refer Remarks)
in BOQ). Battery and charger sizing shall be got approved during detailed engineering before finalization. Accordingly dimensions of LV Roo
ernet Switch to (satisfy port requirements) as per tender drawings/documents then provided two switches shall be considered as single sw
ccordingly dimensions of LV Room, Battery room etc. shall be finalized. Quantity and size of cables shall be derived by bidder based on GIS
s shall be considered as single switch. 3) PLCC / FOTE BCU shall have sufficient I/Os as per given list considering future lines also. 4) BCU for
derived by bidder based on GIS and LCC requirement. Typical philosophies are for reference only. However basic requirements like, 4 Sq.m
ring future lines also. 4) BCU for station Auxiliary shall have sufficient I/Os as per list or otherwise suitable RTU shall be provided. 5) Contra
r basic requirements like, 4 Sq.mm cable for CT, PT and 2.5 Sq.mm for Control wiring is to be followed as per philosophy. Also, 1CX150 size c
RTU shall be provided. 5) Contractor shall be responsible for necessary co-ordination with FOTE and OPGW supplier and erection agency to
er philosophy. Also, 1CX150 size cables for incoming AC supply are to be considered as per rating of LT Panel board. Other than GIS-LCC - Pa
supplier and erection agency to establish remote connectivity and over all operation from Master Control Centre through SCADA system.6
l board. Other than GIS-LCC - Panel cables, typical philosophies may be referred. @ Being a Solar Generation pooling Substation, Under fre
Centre through SCADA system.6) Quantity shall be sufficient to accommodate all spares as per spare list.
on pooling Substation, Under frequency protection will not be applicable, hence panel is not cosnidered.
Total Supply Part II
-
For this form Cross Form Formula exist in Supply Part 2Supply Part 2.2Supply Part 2.3Supply Part 2.4 Forms, First fill
Total Supply Package II

Total Summzero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
3Supply Part 2.4 Forms, First fill the associated form then fill this form
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
Total Erection Package II
-
For this form Cross Form Formula exist in Erection Part 2Erection Part 2.2Erection Part 2.3 Forms, First fill the associa
Total Erection Package II

art 2.3 Forms, First fill the associated form then fill this form
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
Total Civil plus Suppy plus Erection Package II
-
For this form Cross Form Formula exist in Civil Part 2Total Supply Part IITotal Erection Part II Forms, First fill the assoc
Grand Summary Package II

Total Supplzero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
Package II zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
n Part II Forms, First fill the associated form then fill this form
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999
Package I plus Package II Summary
-
For this form Cross Form Formula exist in Grand Summary of Package IGrand Summary of Package II Forms, First fill t
Package I plus Package II Summary

Package I i zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
Package II zero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
Package I azero only. RequiredreqdEnter Positive ValueEnter Positive Value between 0 and 9999999999999
ary of Package II Forms, First fill the associated form then fill this form
0 and 9999999999999
0 and 9999999999999
0 and 9999999999999

BOQ Online SS

Uploaded by

Copyright:

Available Formats

BOQ Online SS

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BOQ Online SS

Uploaded by

Copyright:

Available Formats

EMD Details

Required Required Required

Document Fees including GST

DETAILS OF THE FIRM

. NAME OF THE FIRM: Required

A GUJARAT Energy Transmission CorporationMinimum 1 rows entry required. Number of Rows T

Required Required Required RequiredCurrencyEnter

Required Required Required RequiredCurrencyEnter

C PRIVATE FIRMS: Minimum 1 rows entry required. Number of Rows T

Required Required Required RequiredCurrencyEnter

1 rows entry required. Number of Rows To Add: Add Row

Required Required Required Required

1 rows entry required. Number of Rows To Add: Add Row

Required Required Required Required

1 rows entry required. Number of Rows To Add: Add Row

Required Required Required Required

. Minimum 1 rows entry required. Number o

Required Required Required Required

RequiredCurrencyEnter Positive ValueEnter Positive Value

esent Solvency and last Income Tax certificate to be attached.

i) Registration Letter No. and date.

Whether the Bid is on item rate basis as called for. Required

In case of “Yes”, please furnish following details:

Whether Bidder is having PF Code No. Required

1 Firm’s details as per “Annexure –1”

B-FOR 220KV BPI/HBPI

D-FOR 220KV CT(M)

E-FOR 220KV PT(M)

F-FOR SUPPORT STRUCTURE OF 220KV GIS BUS DUCT

H-FOR 66KV BPI/HBPI

J-33KV SG6 TO AIR BUSHING

K-FOR SUPPORT STRUCTURE OF 33KV GIS BUS DUCT

L-FOR TRANSFORMER OF 220/33KV(160MVA/150MVA) INCLUDING RADIATORBANK AND OTHER

M-FOR LIGHTENING MAST OF REQUIRED HEIGHT( AS PER REQUIREMENT OF DESIGN CALCULAT

O-FOR TRANSFORMER OF 66/11KV (5 MVA) INCLUDING RADIATORBANK AND OTHER FOUNDATIO

Q-22/11 KV LA/CT/CB/ISO/DOUBLE POLE STRCTURE/CABLE TERMINTION

u Pvc pipe of 25mm dia

u Pvc pipe of 50mm dia

only after passing of final bill.) : 10 Percentage

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

al conditions ) suitable for 2 Bus system

ontinuous Bus Arrangement.

ontinuous Bus Arrangement.

ve technical specifications and relevant special conditions.

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Required CurrencyEnter Numeric ValueEnter Positive Value

Protection BOQ of 400kV Dholera Sub-Station