Scribd
Upload
693 views1 page

Roughness Conversion Chart Rampinelli

This document provides a conversion chart for surface roughness measurements using different scales. It lists various roughness measurement scales including Ra, AA, Centre Line Average, Rt, Rz, Ry, UEFCO, ISO, and MCC. The chart converts between these different scales and associates them with surface finish descriptions from superfinishing to raw material. Key information measured includes the mean arithmetical value Ra in micrometers and the maximum Rt and average Rz roughness values in different points.

Uploaded by

Servesh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
693 views1 page

Roughness Conversion Chart Rampinelli

This document provides a conversion chart for surface roughness measurements using different scales. It lists various roughness measurement scales including Ra, AA, Centre Line Average, Rt, Rz, Ry, UEFCO, ISO, and MCC. The chart converts between these different scales and associates them with surface finish descriptions from superfinishing to raw material. Key information measured includes the mean arithmetical value Ra in micrometers and the maximum Rt and average Rz roughness values in different points.

Uploaded by

Servesh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ROUGHNESS CONVERSION CHART

Ra AA Centre Line Rt Rz Ry UEFCO ISO MCC


μm μinch Average μm μm JIS μm 1302
ISO 468 USA CLA μinch Germany average max.
e 4287 ASA B.46.1 UK in 10 height
BS 1134 points
0.006 0.25 N01
0.012 0.5 0.05 0.05 N0
0.025 1 0.25 0.1 0.1 N1
0.05 2 0.5 0.2 0.2 N2
0.1 4 4 0.8 0.4 0.4 N3 f5
0.2 8 8 1.6 0.8 0.8 fP N4
0.4 16 16 2.5 1.6 1.6 fP N5 f4
0.8 32 32 4 3.2 3.2 fG N6 f3
1.6 63 63 8 6.3 6.3 fF N7 f2
3.2 125 125 16 12.5 12.5 fO N8 f1
6.3 250 250 25 25 25 fO N9 f
12.5 500 500 50 50 50 fR N10
25 1000 1000 100 100 100 fT N11
50 2000 200 200 N12
100 4000 400 400 N13
200 8000 N14
SYMBOLS & FINISHING GRADE
Ra AA – CLA
Conventional symbols Surface description
μm μinch
0.025 1 Superfinishing
0.05 2 Burnishing diamond paste
0.1 4 Lapped, extremely fine finish, perfectly smooth
0.2 8 Lapped for seal joints
0.4 16 Ground, EDM
0.8 32 Machined, extremely fine finish
1.6 63 Machined, very smooth
3.2 125 Machined, smooth
6.3 250 Machined, medium finish
12.5 500 Machined, coarse
25 1000 ~ Raw material
50 2000 ~ Raw material

- Roughness is measured in a trasversal direction to


the main grooves.
- The mean arithmetical value “Ra” in μm is assumed
for roughness measurements.
- Rt: maximum value of roughness from the lowest to
the highest point.
1 𝑙
𝑅𝑎 = 𝑙 ∫0 𝑚|𝑦| 𝑑𝑥 - Rz: average roughness in 10 points.
𝑚

You might also like