Procedure For Sandblasting

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

PowerPoint Presentation:Scrap the sandpaper and opt for the quick and efficient process of sandblasting.

Sandblasting is used on
both creative and industrial levels, from removing old paint to etching and engraving. Master the art of sandblasting by following this
guide. Read up on the process, recommended equipment, sandblasting accessories, and top tips. A Step-by-Step Guide to the
Sandblasting Process

PowerPoint Presentation:What is Sandblasting? U sed in a variety of professions, sandblasting is the process by which the surface of
an object is eroded by means of a concentrated stream of very fine sand. Sandblaster guns refine a surface while also giving a
decorative finish to craft metals. It can be used to remove old paint, smooth a rough surface, roughen a smooth surface or give shape to
an object. In and around the home, sandblasting replaces the use for sandpaper, eliminating the need for hand-sanding and the mess
that goes along with it. Sandblasting is quick, efficient and delivers desirable results.

Safety Precautions:I t i s important to be aware of the necessary safety precautions that need to be put into place before home or
industrial sandblasting can take place. Take note of the following: Wear safety goggles to protect your eyes; Make use of protective
gloves; Ensure that you wear a mask to avoid inhaling the tiny particles of debris, and To avoid a big clean-up, wear old clothes or
overalls. Safety Precautions

Step One:T he first step in the sandblasting process is to determine what kind of material and equipment are necessary to complete the
task. It is also important to clean the surface upon which you will be working to ensure that there is no residue which will result in a
marred finish. Analyze the degree of work that is required, the type of blasting media that is required, and what tools will need to be
used. Wipe down the surface of the object. Ensure that all the correct safety apparel is available. Explore the different types of blasting
media – for materials that are more difficult to work with, abrasive mediums will need to be used. These include plastic abrasives , glass
beads , aluminium oxide, steel grit, and silicon carbide. Step One

Step Two:P repare your surrounding area to avoid an unnecessary mess. Sandblasting accessories include a sandblasting cabinet that
is used to contain the blasting media and stops it from flying all over the work area. Place duct tape over the areas that are not to be
blasted. Open the cabinet and place the item in the center while ensuring that it is stable. Close the compartment. Ensure that any
delicate surfaces are removed from the direct working area to avoid damage. Use protective covering for areas of concern. Step Two

Step Three:B last off! Once you have prepared your equipment and surroundings, get started with your project. It is important to keep in
mind that sandblasting is a process the requires practice before being able to perform the task properly. It is always a good idea to
practice before you begin with a major project. Turn the sandblaster on using the switch on the side. Place your hands into the glove
openings and pick up equipment. Use the lever on the top of the sandblaster’s nozzle to start the process. Ensure that you coat the
object evenly, keeping the blaster six to twelve inches away. Step Three

Top Tips:H ere are a few top tips that will ensure that your restoration process is successful: It's All in the S and . With a variety of fine
sand to choose from, ensure that you select one that won’t warp metal, is reusable, and doesn’t clog up your machine. Air Compressors
. Air compressors are not made for blasting . Ensure that you take periodic breaks within the process to prolong the use of your
compressor. Which to Choose . Depending on your workload and the type of work that you are doing, opt for either a siphon or
pressurized system to do the job. Establish which process will be easier and more effective to avoid excessive costs. Top Tips

Benefits of Sandblasting:T he main benefits of the sandblasting process are: Sandblasting saves time and is more efficient than using
sandpaper. Old, faded surfaces are evenly removed and cleaned. Sandblasting allows you to access corners and areas that are difficult
to reach. Sandblasting is particularly well suited to the removal of rust which causes property damage . Make use of sandblasting to
preserve the use and longevity of your metal pipes, furniture, and fittings. Benefits of Sandblasting

PowerPoint Presentation:L ocated in Michigan, Big A's Place LLC stocks a variety of sandblasting accessories and equipment for both
home and industrial use. As a direct distributor and aftermarket supplier, Big A’s is home to sandblasting cabinets, parts, and portable
sandblasting equipment, as well as a collection of safety products such as helmets and breathing filters. Brands include: Pirate Brand ,
Kennametal , Malyn Ceramics, and Everblast . If you are looking for top quality sandblasting accessories and equipment, give us a call
on (616) 741-9237 or visit us at www.sandblaster-parts.com .

You might also like