Engineering

GREAT Solutions

Safety Valves
for Process Industries
Safety Valves for Process Industries

Contents Engineering
GREAT Solutions
03 Safety Valves Introduction

04 Safety Valves Overview

05 Regular Flow Safety valves for pressure

relief in accordance to PED, DIN/EN
and ASME

10 High Flow Process and steam safety

valves to PED and DIN/EN standards

15 Safety Valves in accordance to High Flow

ASME Sec. I, Sec. III and Sec. VIII

19 Special Valves

2
 Safety Valves Introduction

IMI Bopp & Reuther spring loaded safety valves can be found
wherever pressure systems for steam, gases and liquids need to
be reliably protected. Customers from every area of the process
industry benefit from our experience and process expertise:

We develop both individual solutions and standard products for

> Chemical industry > Process steam systems

> Petrochemicals > Water supply systems
> Power generation > Refineries
and supply > Polymer applications

Our solutions for critical fluids and operating conditions

help to optimise processes and protect people and plants.
Our company has been a highly specialized partner of the
process industry for decades; almost all the global players in
this branch are among our customers.

Safety valves for

all sectors of the
process industry

3
Safety Valves for Process Industries

Safety valves overview

Safety valves have the function of preventing inadmissible overpressure in pipe systems, pressure
vessels and boilers, in order to avoid danger to people, plant and the environment. They are set to a
higher pressure than the operating pressure of the protected system. Safety valves …
… open once the set pressure is reached.
… discharge the required mass flow in a controlled manner.
… close after the pressure has dropped.

Regular flow safety valves for pressure relief

in accordance to PED, DIN/EN and ASME
Safety valves for pressure systems with low mass flow or where the mass flow
is of marginal importance, e.g. with thermal expansion, are grouped in the
application category Regular Flow.

High flow process and steam safety valves

to PED and DIN/EN standards
In the application category High Flow, the required capacity is usually the most
important criteria for selecting a size. The size of the outlet is always larger than the
inlet, in order to provide the space for supercritical relief of the fluid in the discharge
area.

High flow safety relief valves according to API Standard

526, ASME Sec. I, Sec. III, Sec. VIII and PED
This category includes high performance process and steam safety valves
certified to ASME Sec. I, Sec. III and Sec. VIII.

Special valves
This category includes Controlled Safety Valves, Control Unit, Pressure
Reducing Valves and Change Over Valves.

IMI Bopp & Reuther develops, designs, labels, manufactures and supplies safety valves in accordance
with common approvals and standards, which can be found in the detailed product description.
4
 Flexible selection of
Regular Flow optimal and cost-effective ASME VIII certified
safety valves
The Regular Flow programme
offers a great number of types
and sizes, material designs
and an extensive range of
connections. Flange, weld-
end, threaded and clamp-type
connections can be selected
to suit the pressure system.
Special connections are easy
to provide, if requested by the
customer.

Si 0 Si C1
The main applications for this Compact The Compact Safety Valve is installed
Safety Valve is high pressure in the in compressors and whereever medium
chemical industry. must be relieved as effect of thermal
exposure.
The block body design in 1.4571
stainless steel provides an excellent The valve is available with EN and
chemical resistance. ASME flanges.

Si 2x21 with seat bushing Si 4x22

Si 2x23/24/25 with full nozzle The state-of-the-art Safety Valve for
The Low & High Pressure Valve Liquids has a cost-effective body
finds its operating conditions prevalently design with seat bushing.
in water supply and for protection of Stable function at low lift and built
system components at high pressure up back pressure up to 20% for
and feed water supply. Smooth and conventional design enables use in
stable behaviour thanks to comparatively many applications.
low lift.

5
Safety Valves for Process Industries

Si 0 Si 0321 compact safety

valve with flange connection
The basic version of the Si 0 High Pressure Compact Safety Valve
is delivered with male screwed inlet and female screwed outlet,
gastight bonnet and cap.

Sizes DN 15 to 25 NPS ½" to 1"

Set pressures 0.40 bar g up to 400 bar g 6.6 psig to 5800 psig

Materials 1.4571 stainless steel

Benefits and features

The compact spring-loaded safety valve is made of stainless steel (1.4571) for high
chemical resistance. It is also available with bellows to balance back pressure and
for high tightness to the outside, even at higher back pressures.
The safety valve has a variety of connections and is wear resistant with hard-faced
seat.
The valve Si 0329 for pressure protection (vapours, gases and liquids) is used in
the chemical and petrochemical industry, for industrial gases, cooling and oxygen
applications, equipment engineering and chemical reactors, also suitable for mobile
pressure vessels and for back pressures above 60 bar g.

One of our
smallest compact
safety valves
Si 0

Made entirely of
stainless steel

Ideal for very high

pressures in the
chemical industry

Bellows upon
request

Also available
with threated
connection

Suitable for
high back Si 042, the designation “4” in the type
code specifies bellows design.
pressures

6
Si C1 ASME VIII certified

The compact safety valve series is the ideal solution for protection
against excess pressure in all industrial applications in the low-to-
medium capacity range involving steam, gases and liquids. This
universal compact safety valve is certified according to PED and
ASME VIII.

Sizes DN 15 to 25 NPS ½” to 1”

Set pressures 0.55 bar g up to 200 bar g 8 psig to 2900 psig

Materials 1.0619 WCB

1.4408 CF8M

Benefits and features

Si C1 valve is available with multiple options, which includes balanced bellows for Si C1329, the standard compact safety
body seat sizes 12.2 mm and 17 mm. valve with threated connection

This series has an excellent return on investment and due to the simple design, it
is available at very short notice, providing various types of connection. Thanks to a
ball-bearing disc there is increased sealing performance. Outer
The compact design covers a broad range of applications: the major purpose is parts Inner
thermal expansion, protection of pipelines, chemical and petrochemical industry, parts of
technical gases, cooling and oxygen applications, OEM applications (e.g. pumps our Si C1
and compressors) and also for steam, gases or liquids.

Optimal construction -
easy maintenance
Straight forward design for easy
assembly

All inner spare

parts made from Various types
stainless steel of connections
inlet and outlet Sizes DN 20 and DN 25 (¾" and 1") with
balanced bellows possible

7
Safety Valves for Process Industries

Si 2x21 / Si 2x23/24/25
Si 2x21 is a low cost regular Safety Valve especially built for low
pressure. Built for high pressure the Si 2x23/24/25 is full nozzle
design with a solid inlet nozzle.

Si 2x21 Si 2x23/24/25

Sizes DN 20 to 150 DN 15 to 50

Set pressures 0.45 bar g to 16 bar g 0.45 bar g to 400 bar g

Materials 0.6025 / GG 25 1.0619

1.4408

Benefits and features

There functional behaviour smooth and stable. Si 2321, our cast iron safety valve for
basic applications
Easy maintenance because of special design features, e.g. one part spindle.
Dismanteling of the valve for lapping of seat and disc without change of
set-pressure is possible.
Spindle
This product is used for the following applications: vapours, gases or liquids;
protection of systems downstream of control valves, water supply up to PN 16
and Si 2x23/24/25 up to PN 400. Internally luberpox coated the Si 2x21 is suitable
for drinking water service. Disc
holder
Stable opening response Discs
with very low lift

Internally
coated for
water supply Spare parts for all safety valves upon
systems use request and supported for many years.

Stainless steel
inner parts

High pressure safety valve Si 2323 for

cooling water circle in power plant.

8
Si 4x22
The modern Safety Valve for all regular capacity applications in all
process industries sectors

Sizes DN 25 to 100 NPS 1" to 4"

Set pressures 0.1 bar g up to 40 bar g 1.5 psig to 600 psig

Materials 1.0619 WCB

1.4408 CF8M

Benefits and features

This valve series has a cost-effective body design with seat bushing developed with
the modular principle with other series and a smooth and stable behavior thanks to
comparetively low lift.
The inner parts are made of stainless steel. Si 4322, our standard process safety
For applications in thermal expansion, protection of pipelines, protection of heat valve for regular capacities
exchangers, chemical industry, petrochemicals, industrial gases, cooling and oxygen
applications and for other process applications up to PN 40.

0.9
0.9

0.8
0.8

0.7
0.7

0.6
0.6

aw [–] 0.5
0.5
αW [−]

Typical regular 0.4

0.4

safety valve for 0.9

0.9 0.3

many applications 0.8

0.8 0.2

d0 = 13.6-52 mm
0.7
0.7 0.1

0.6
0.6 0.0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.8 0.9 1.0
pb/p0[–]

0.5
0.5
αw [−]
aw [–]

0.4
0.4

Ball-bearing- 0.3
0.3

mounted disc 0.2

0.2
0.9

for high seat

0.9

0.1
0.1 d0 = 13.6-52 mm

tightness 0.0
0.0
0.8
0.8

0.7
0.7
0.00
0.00 0.05
0.05 0.10
0.10 0.15
0.15 0.20
0.20 0.25
0.25 0.30
0.30 0.35
0.35 0.40
0.40
h/d [−]
h/d0 [–]
0

0.6
0.6

0.5
0.5
aw [–]
αw [−]

0.4
0.4

0.3
0.3

0.2
0.2

d0 = 13.6-52 mm
0.1
0.1

0.0
0.0
0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40
0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40
h/d0[–]
h/d0 [−]

20% back pressure

without bellows
permissible Si 4322 certified by EC type examination.

9
Safety Valves for Process Industries

High Flow Safety Valves according to PED, DIN/EN

The required capacity is usually
the most important criteria for
selecting a size in this category.
With reference to the inlet size,
high flow valves can discharge
the highest capacity and in
particular on gas/vapour service
open rapidly for instant pressure
relief.

The size of the outlet is always

larger than that of the inlet, in
order to provide the fluid room
for supercritical relief in the
discharge.

The variety of pressure ratings,

temperature classes and sizes Si 6x01 Si 4x02
provides a flexible choice for all
The Low Pressure Safety Valve for The state-of-the-art High Capacity
industrial requirements. Steam Applications has a cast iron Process Safety Valve for medium
body with stainless steel inner parts pressure has a cost-effective semi
(except for spring and spring washer). nozzle body design with seat bushing.
It is cost-efficient due to its semi-nozzle It is developed in modular design with
design. other series and offers a reliable function
with ideal capacity.

Si 6x03-05 Si 6106
The proven quality high-pressure The High Pressure Steam Safety
safety valve has a reliable design valve with materials suitable for high
with solid inlet nozzle, screwed in and temperature application.
welded. It offers various sizes and
The product is ideal for combination
options and is available in material
with the pneumatic actuator AK and
designs for high as well as low
PC 50/53 control unit for “controlling”
temperatures.
the discharge process.
10
Si 6x01
This low pressure safety valve is often used in steam applications
and protection of heat generation units. It has a cast iron body with
stainless steel inner parts (except for spring and spring washer).

Sizes DN 20 to 150

Set pressures up to 16 bar g

Materials 0.6025 / GG 25

Benefits and features

The semi nozzle body design makes the valve cost-effective. It is suitable for
vapours, gases and liquids.
With limited options and variations the Si 6x01 is standardized for ease of use also
for non-industrial sectors. Si 6301, standard version of our cost-
efficient low pressure valve

Selected for
Options heating technologies
upon request

Basic valve for

low pressure

The special design with diaphragm

seal (option .58) serves to tightly seal
the spring chamber and guides

Spare parts:
spring, discs,
disc holders

Spare parts for all safety valves upon

Economic for request and always on call
heating systems
and water use
11
Safety Valves for Process Industries

Si 4x02
The state-of-the-art High Capacity Process Safety Valve for
medium pressure has a cost-effective semi nozzle body design
with seat bushing.

Sizes DN 20 to 200 NPS 1" to 8"

Set pressures 0.1 bar g up to 40 bar g 1.5 psig to 600 psig

1.0619 WCB
Materials
1.4408 CF8M

Benefits and features

Developed as a modular design with other series, it provides a reliable function with
ideal capacity.
The inner parts are made of stainless steel (except for spring and spring washer). Si 4302, state-of-the-art high capacity
process safety valve for medium pressure
Easy maintenance because of dismanteling of the valve for lapping of seat and disc
without change of set-pressure is possible and the bellows is in a safe location
because it is outside the flowpath for ensuring extended lifetime.
For vapours, gases and liquids, typical applications are protection of pressure
vessels, heat exchangers, system components. Suitable for all industrial applications
such as chemical and petrochemical industry, technical gases, cooling and oxygen
applications, power generation and power supply and steam boilers up to PN 40.

Engineered with
high discharge

Si 4302 as cutaway model

Optimum engineered
operation for easy
piping

Single Trim for

Steam, Gases, Liquids IMI Bopp & Reuther new sizing software
Si-Tech 4.0 - A worldclass tool for sizing
and selection of safety valves.

12
Si 6x03 / Si 6x04 / Si 6x05
The proven IMI Bopp & Reuther high-pressure safety valve has a
reliable high quality design with solid inlet nozzle, screwed in and
welded, available with various sizes and options.

Si 6303/6304/6305

Sizes DN 25 to 400

Set pressures up to 250 bar g

1.0619

Materials 1.7357

1.4408
Si 6303 high-pressure safety valve also
for low temperatures
Benefits and features
Different material designs are available for high as well as low temperatures.
For vapours, gases and liquids. Typical applications are the protection of system
components, steam boiler, air separator, power plants and industrial steam
generation. It is also used in high-pressure chemical processes and paper factories.

Engineered for
high pressure
protection

Seal welds with the highest accuracy

between nozzle and body

IMI Bopp & Reuther high-pressure safety

valves type Si 63 installed

Full nozzle design

13
Safety Valves for Process Industries

Si 6106
The High Pressure Steam Safety valve is designed to manage high
forces.

Sizes DN 80 to 300
Set pressures 15 bar g up to 200 bar g
1.0619 GS
Materials 1.7357CrMo
1.7359CrMo 9-10

Benefits and features

The benefits of this High Pressure Safety Valve is a solid inlet nozzle, screwed in and
welded. The material design is for high temperatures with the option to select the
material at the inlet in accordance with customer specifications. Si 6106, high pressure steam safety
It is ideal for combination with the pneumatic actuator AK and to be operated with valve with piston AK.
the PC 50/53 control unit. This installation provides for “controlling” the discharge
process. Open bonnet design with the resulting ventilation of the bonnet chamber
permits a standard steel spring to be used in fluid temperatures up to 400°C. 0.9
0.9

Suitable for applications such as steam boilers, superheaters, power plants and 0.8
0.8
0.9
0.9

industrial steam generators, for steam temperatures above 500 °C and large flow 0.7
0.7
0.8

diameter with high pressures. 0.6

0.6
0.7

0.5
0.5
0.6
αw [−]
aw [–]

0.4
0.4
0.5
0.5

[−]
αaW [–]
w
0.3
0.3
0.4
0.4

Engineered specifially for

0.2
0.2
0.3
0.3

HP steam application
0.1 d0 = 56-140 mm
0.1
d0.2
= 155-200 mm
0.2
0

0.0
0.0 d0 = 56-140 mm
0.1
0.1
d0 = 155-200 mm
0.00
0.00 0.10
0.10 0.20
0.25 0.30
0.30 0.40
0.40
h/d [−]
h/d0 [–]
0

0.0
0.0

0.1
0.1 0.2
0.2 0.3
0.3 0.4
0.4 0.5
0.5 0.6
0.6 0.7
0.7 0.8
0.8 0.9
0.9
paP/p/P
0 [−]
[–]
b 0

Si 6106, coefficient of discharge aw

depending on h/d0 and pb/p0 for gases
and vapours

Safe operation
with 25% back
pressure

IMI Bopp & Reuther does possess the

technology to perform high quality body
seat repair.
Full nozzle design

14
Safety Valves according to ASME, API
This application category
includes safety valves, which
belong to global industry
standards, e.g. API 526. The
valves are manufactured in
accordance with ASME Sec. I
or VIII.
The applications for Si 8 type
valves can be found in the
chemical industry, petro-
chemicals, oil/gas – onshore
and offshore, refineries, tank
farms and closed systems.
Series Si 9 is built for high
performance applications on
fired vessels as per ASME Sec. I.
Si 8 D-T Si 8 V, W
The API Safety Valve is manufactured Exceeding the API 526 standard the
in accordance with API 526, ASME additional orifies V and W meet very
Code Sec. VIII. The National Board large capacity requirements.
of Boiler (NB) and Pressure Vessel
Inspectors certified capacities for air,
steam and water.

Si 9
The High Performance Steam Safety
Valve Si 9 is designed according to
ASME Sec. I requirements. A large scale
of orifice sizes ensure optimum selection.

15
Safety Valves for Process Industries

Si 8 Size D-T according to API 526 Ideal für die chemische und
petrochemische Industrie

The Si 8 Safety Valve type fully meets the specification of API 526
and is manufactured in accordance with ASME Code Sec.VIII.

Sizes NPS 1" to 8"

Set pressures up to 414 bar g up to 6000 psig
Materials 1.0619 WCB
1.7357 WC6
1.4408 CF8M

Benefits and features

The Si 8 series is also approved by EC type examination and can be CE marked.
The one-trim design makes the valve suitable for gas, vapour and liquids. Si 8401, API safety valve with bellows
The valve has a positive lift stop at full capacity. The disc bearing has been
optimized for high seat tightness.
The nozzle ring is always set to lowest position because the valve is designed to
operate at optimum without ring adjustment.
Maintenance is easy due to a one-part spindle, a simplified disc retention clip and
the rugged guide design.
Suitable for applications in the chemical and petrochemical industries, closed
systems, oil/gas – onshore and offshore, refineries and tank farms as well as nuclear
facilities according to ASME Sec. III.
Upon request the fulfillment of NACE MR 0175 and NACE MR 0103 requirement is
available.

A wide range
of sizes
Engineered in
full compliance API valve group with different sizes
with API 526 High quality individually adjusted to specification.
overpressure
protection

One-trim
design for
gas, vapour
and liquid

Explosion view of API valve shows inner

Designed with and outer parts.
excellence,
proven in tests
up to 280 bar g

16
Si 8 Large Sizes V, W Bellows in safe
location, outside
the flowpath
The additional orifice sizes V and W allow for selection of one
or smaller quantity of valves where the API 526 standard would
require a multiple installation for large capacity.
Based on the general API range V, W orifices are designed for
high capacities.

Sizes NPS 10" to 12"

Set pressures up to 20.7 bar g up to 300 psig
Materials 1.0619 WCB
1.7357 WC6
1.4408 CF8M

Orifice W-safety valve for high capacity

applications
Benefits and features
The additional orifice sizes V and W are made for very large flow applications.
These capacities are also cerftified by the National Board of Boiler and Pressure
Vessel Inspectors.
Using similar design the orifice D-T - valve benefits also apply to sizes V and W.
Suitable for applications in the chemical and petrochemical industries, closed
systems, oil/gas – onshore and offshore, refineries and tank farms as well as nuclear
facilities according to ASME Sec. III.

High capacity
safety valve Si 84 with balanced bellows

Druck [bar]
0 5 10 [bar]
Druck 15 20
Set Pressure [bar g]
1000 00 55 10
10 15
15 20
20
500
1000
1000

800 500
500 01
400 WC6
800
800
[°C][°C]
[°F] [°F]

400
400
600 300
Inlet temperature [ °C]
Temperatur

Temperatur
Inlet temperature [°F]

600
600
300
300
Temperatur

Temperatur

400 200
400
400 200
200 00
WCB
200 100
200
200 100
100

0
0
00

Adjusting
00
100 200 300
0 100
100 Druck [psi] 200 200 300
300

of ring not
Set Pressure [psig]
Druck [psi]
01 03

required
01 03

01 Druck03
[bar]
Set Pressure [bar g]
00 55 Druck 10 [bar]
10 15
15 20
20

Refer to Si 830 see 1000

1000

1000
0 5 10 15 20
500
500

selection charts
800
800 500
400
400
800
600 400

detailed in our
Inlet temperature [ °C]

600
300
Inlet temperature [°F]

300
[°C][°C]

600
[°F] [°F]

300
400
400 200
200

leaflets.
Temperatur

Temperatur

400 200
04
Temperatur

CF8M
100
Temperatur

200
200 100

200 100
00
00
0 0
−100
-100
−200
-200
−100
−200 −200
-200
−400
-400
−200
−400
00 100
100 200
200 300
300
Set Pressure [psig]
0 100 Druck [psi] 200 300
Druck [psi]

Selection chart for Orifice W, that

shows the used material depending
on temperature and set pressure.
17
Safety Valves for Process Industries

Si 9
The high performance Steam Safety Valve Si 9 is designed
according to ASME Sec.I in requirements. A large scale of orifice
sizes ensures optimum selection.

Sizes NPS 1½" to 12"

Set pressures 3 bar g to 330 bar g 44 psig to 4.786 psig
Materials WCB
WC9
C12A

Benefits and features

Fixed overpressure and blowdown according ASME Sec. I with no rings hence no
requirement for adjustment. ASME safety valve Si 910x.83b with
disc spring for high pressure steam
It guarantees a stable position of the disc by mechanical lift stop at full lift. The application
optimized disc spindle connection offers high seat tightness.
The forged inlet nozzle is available with welding connection or flanged connection.
Special disk spring design for high pressures and large orifice diameters is proven.
The Si 9 is full nozzle design and the inlet pressure contained by a forged solid part.
The cast outlet body is charged by the reliefed pressure only. The valve function is
stable up to 25% built up to backpressure.
This product is used for the following applications: power plants and industrial
steam generation; steam applications in the petrochemical industry; steam boilers;
superheaters and process steam systems.

Complete range
of sizes and
pressures High
performance
steam safety IMI Bopp & Reuther operates 2 steam
valve test benches for hot setting of steam
safety valves

ASME I
compliance Forged full
without rings nozzle inlet

18
Special Valves
The category includes
Controlled safety valves,
Control Unit, Pressure
Reducing valves
and Change Over valves.

Controlled Safety Pressure Control Unit PC 50

Relief System (CSPRS) The “Control Unit” PC 50 is designed
The operation limits of spring loaded for operation of pneumatic assisted
safety valves can be improved by use of safety valves.
pneumatic control.

Re 34 Change Over Valves

The “Pressure Reducing Valve” “Change Over Valves” allows
regulates automatically the downstream switching from one Safety Valve to
pressure in water supply installations. another during continuous system
It is suitable for variable downstream operation in order to avoid process
consumption and large pressure interruption or shutdown.
differences.

19
Safety Valves for Process Industries

Controlled Safety Pressure Relief System (CSPRS)

This Controlled Safety Pressure Relief System is used primarily
where standard spring-loaded safety valves cannot meet stringent
operating conditions. In addition to the safety valve spring the con-
trolled safety valve is equipped with an air pressure cylinder piston.

The control unit PC 50 operates in accordance with the closed

circuit principle, i.e. the loading air discharges by reaching the
engage pressure (usually set pressure).

5 piston sizes are available and combinable with all safety valves
from DN 25 to DN 400.

Benefits and features PC 50 control unit with connected

The load air increases the closing force up to the set pressure and the lifting air pneumatic assisted springloaded
supports the blow-off process. safety relief valve
The fail-safe function of the safety valve is guaranteed by installed spring loading
even in case of air failure. More than one safety valve can be operated with one
control unit.
There is a static performance, e.g. increased tightness up to valve opening, high
setting accuracy, and precise repetition of the set pressure thus improving operating
efficiency.
Typical applications are systems with high operating pressures, increased tightness
requirements, limited opening and reseating parameters, critical applications.
For nuclear application the Control Unit PC 50 is available in stainless steel body
housing with reinforced superstructure. This design is dynamically qualified for 3g
including fundamental frequency test.

Five piston sizes for all

dimensions and pressures
Reduced hysteresis Pneumatic piston AK based on
differencial area piston principle.
+3% | -4% possible

Sealing up to
API valves prepared for pneumatic
set pressure
assistance, equipped with supplementary
loaded piston.

20
PC 50
The use of the Pneumatic Control Unit PC 50 with set pressure of
0.1 bar g up to 250 bar g is to control safety valves with modular
differential surface double acting piston AK or safety valve with
integrated differential surface piston.

Benefits and features

The standard device offers pneumatic triple redundancy.
The pressure switches can be checked during operation.
Only one auxiliary power (pneumatic air) required for operation.
The pressure switch design is a frictionless force-balance measuring system and
with high setting accurancy (<1%).
This product is suitable for gases, steam or liquids, for applications in chemical and
Control
Betriebstechnische Unit PC 50 controls safety valves
Dokumentation Bopp & Re
petrochemical industries, in process industries, power generation, in conjunction
with piston and lifting device.
with assisted safety valves as well as for nuclear applications.

PH1P
H1 1
Characteristic Line
Kennlinie

Lifting Air Pressure

Hubluftdruck

Spring Set
Federansprechdruck
Pressure
(ungesteuert)
(Uncontrolled)

Stable
performance PH2
PH2 2

State-of-the-art
components System Pressure
Systemdruck
The test procedure is carried out
at first (zeroDiagramm 1
point method) with
two system pressures at least-
13. Steuerschemata
in the diagram the points 1 and 2.
SchaltungThe
N (G rundausführlifting
registered ung) air pressure 0-5
SchaltungPH1
N (Pand
rüfauPH2
sführuat
ng)the pressure 0-5
Schaltunggauge
N (mit and the pressure
elektrischer of the
Anlüftung) 0-5
Basis-Gerät 1 system are entered into diagram.
Schaltung N (Prüfausführung mit elektrischer Anlüftung) 0-5
SchaltungThe
T (Gconnecting
rundaudführunstraight
g) line 0-5
Schaltungthrough
T (Prüfauthe
sfühmeasured
rung) points 0-5
Schaltungmeets
N2 (Gruthe
ndaux-Axis
sführunof
g) the diagram 0-5
Schaltungat
N2the
(Prüset
fauspressure.
führung) 0-5
N2during
SchaltungIf, a repeated
(mit elektrischer test,
Anlüftung) the 0-5
Schaltungmeasured valuesmit
N2 (Prüfausführung are on the Anlüftung)
elektrischer 0-5
Schaltungcharacteristic
T2 (Grundausfüline
hrungof)
the zero point 0-5
Basis-Gerät 2 measurement, this is considered
Schaltung T2 (Prüfausführung) 0-5
as a proof of the set pressure.
Schaltung TN (Grundausführung) 0-5
Schaltung TN (Prüfausführung) 0-5
Mobile Testing: Test of set pressure of
Schaltung TN (mit etektrischer Anlüftung) 0-5
Excellent Triple safety valve during operation
Schaltung TN (Prüfausführung mit elektrischer Anlüftung) 0-5
system redundancy
integrity

Highest
reliability
Pneumatisches Steuergerät PC 50 0-55-10003.4 Rev. C

21
Safety Valves for Process Industries

Re 34
This pressure reducing valve with sizes DN 65 to DN 400 for
water is suitable for variable downstream consumption and large
pressure differences. This valve balances the inlet pressure by
a proven and tested piston system, in which the seals can be
replaced quickly and easily.

Benefits and features

The valve works independently from external energy. Also it provides constant,
but adjustable low downstream pressure, even at varriable upstream pressure
and fluctuating volume flow. At no flow conditions the valve is completly tight.
A well proven piston-venturi nozzle system provides high encurance and long
service life. The stainless steel insert is easy to dissamble and requires only little
space for maintenance.
Re 3431, pressure reducing valve usually
Another benefit is the low mounting height which allows changing the sealing used for water applications
elements without removing the body from the line.
Applications are cold water, potable water, fluctuating flow and largest volume mass
flow. Re 34 piston as spare part
upon request

Perfectly suited for

water systems with large Smallest and largest flow in
geodetic height high accuracy
differences

Wet parts
made of
stainless steel

Re 34 produced for usage in sewage

plants

Maximum operational
reliability (piston system)

22
Change Over Valve
Change Over Valves with the sizes DN 20 to DN 300 for all
industrial facilities that require 100 % plant availability – even during
maintenance and testing of safety valves.

Benefits and features

IMI Bopp & Reuther Change Over Valves Assemblies increase process performance
and plant availability by providing the opportunity to switch from one safety valve to
another without process interruption or shutdown, whenever maintenance of the
safety valve in operation is needed.
Our Change Over Valves are designed and selected for best flow efficiency with
superior zeta-value in order to fulfill the maximum inlet pressure loss requirements of
3% according to AD 2000 and API 520.
Their high efficiency design often allows smaller nominal diameters, which saves
pipe network operation costs. Change over valve with two low cost
regular safety valves Si 2323
Change Over Valves can be used in two ways:
1) As stand alone valve at the inlet inside of two safety valves, in case of blowdown
to atmosphere.
2) As interlockable Change Over Valve combination on the inlet and outlet side of
two safety valves in case of blowdown to discharge piping.
Change Over Valves are used for steam, gases or liquids in these applications:
chemical and petrochemical industries, process industries and plant construction.

One safety valve

in operation, the
other in standby

Change over valve

with low pressure loss

Interlocked
combination for
inlet and outlet
change over

23
IMI Bopp & Reuther
Bopp & Reuther Sicherheits-
und Regelarmaturen GmbH
Carl-Reuther-Straße 1
68305 Mannheim
Deutschland
Tel: +49 (0)621 76220-100
Fax: +49 (0)621 76220-120
www.imi-critical.com
[email protected]

IMI Critical Engineering

Lakeside, Solihull Parkway
Birmingham Business Park
Birmingham B37 7XZ
IMI BuR / PI Product Range / en / 06_2016

United Kingdom
Tel: +44 (0)121 717 3700
Fax: +44 (0)121 717 3701
www.imi-critical.com