User Guide LCD TECHNIKA LCD 24-621 - L2M16+DVD PDF

User Guide
Contents
Introduction USB Operation

HDMI 5 Brief introduction 26
Safety is Important 5 Playback 27
In the box 5 Play Music 29
Play Movie 29
Safety Information
Operate in full screen state 30
Keep these instructions 6 Play Photo 30
Important 6
Electrical Information 7
ATV Menu Setup
Parts Identification ATV Setting 31
Front panel 8 Picture 32
Local keyboard panel 8 Sound 33
Side panel 9 Function 33
Connecting the TV Teletext Function
Connecting the TV antenna 10 Teletext Function 34

Connecting external devices 10
Connecting diagram 11 VIDEO Menu Setup
Common Interface slot Video Setting Menu 35
Common Interface 12
VGA Menu Setup
Wall Mounting
VGA Setting 36
Wall Mounting 13 Sound 36
Picture 37
Remote Control Function 37
Remote buttons 14
Battery Installation 16
Let‘s Start
Switching on 17
Selecting source operation 17
DTV Menu Setup
DTV Setting 18
Picture 24
Sound 25
Function 25
Contents
DVD Operation DVD Function Setup

Brief Introduction 38 Picture 50
Comparison between Sound 50
DVD and other Discs 38 DVD Settting 50
Function Introduction 38 Function 52
Features 39
Compatible Disc types 40 Troubleshooting
Region code 40
Playback 41 Display Troubleshooting 53
Volume control 41 Sound and TV Troubleshooting 53
VCD, SVCD Menu Playback 42 DVD Troubleshooting 54
Memory 42 Specifications
Select track to play directly by
Number buttons 43 Specifications 55
Select Language / Audio 43
Repeat Playback 44 Display Mode
Repeat Playback of
Display Mode 57
selected Segment 44
Fast Playback 45
Play from the Desired Position 45
Additional Information
Zooming the Displayed Frame 46 Care and Maintenance
MPEG4 and JPEG file Playback 47 (Handling Discs) 58
Disposal 58
Warranty 58
Introduction
Thank you for purchasing this Technika

HD Ready 1080p LCD/DVD TV which has been
In the box
designed and manufactured to give you many
years of trouble-free service. You will find the following:
You may already be familiar with using a • HD Ready 1080p LCD/DVD TV

similar product but please take time to read
these instructions which have been written • User Guide
to ensure you get the very best from your • Power Cable
purchase.
• Remote Control
Throughout the remainder of this user guide
the Technika HD Ready 1080p LCD/DVD TV will • 2 x AAA Batteries
be referred to as the ‘TV’.
Note: If any of the items listed are
damaged or missing, please contact
HDMI the TESCO electrical help line on
0845 456 6767.
HDMI (High Definition Multimedia Interface)

is the next generation of digital interface.
Unlike conventional connections, it transmits
uncompressed digital and audio signals using
a single cable. This TV supports high-definition
video input (720p and 1080i) via the HDMI
sockets on the back of the TV.
Safety is Important
To ensure your safety and the safety of others,

please read the Safety precautions BEFORE
you operate this product.
Keep this information in a safe place for

future reference.
23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide 5

Safety Information
IMPORTANT SAFETY INSTRUCTIONS - • To avoid interference, switch this TV off
READ CAREFULLY BEFORE USE while operating other radio devices in the
immediate vicinity.
Take note of the following safety information
which appears on the back of this TV. • Refer all servicing to qualified service
personnel. Servicing is required when the TV
CAUTION! RISK OF ELECTRIC SHOCK
has been damaged in any way, such as the
DO NOT OPEN.
power cord or plug being damaged, liquid
TO REDUCE THE RISK OF ELECTRIC
being spilled on or objects have fallen onto
SHOCK DO NOT REMOVE COVER (OR
the TV, the TV has been exposed to rain or
BACK).
moisture, does not operate normally, or has
NO USER-REMOVABLE PARTS INSIDE
been dropped.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. WARNING! TO REDUCE THE RISK
OF FIRE OR ELECTRICAL SHOCK,
DO NOT EXPOSE THIS TV TO RAIN
This symbol indicates that there are
OR MOISTURE. THE TV MUST NOT
important operating and maintenance
BE EXPOSED TO DRIPPING AND
instructions in the literature
SPLASHING AND NO OBJECTS FILLED
accompanying this TV.
WITH LIQUIDS SHOULD BE PLACED ON
This symbol indicates that dangerous THE TV.
voltage constituting a risk of electric
shock is present within this TV.
• No naked flame sources such as candles
Keep these instructions. should be placed on the TV.
Caution! Changes or modifications not

• Do not use this TV near water.
expressly approved by the manufacturer
• Clean only with a slightly damp cloth. could void the user’s authority to operate this
device.
• Do not block any ventilation openings.
Caution! Usage of controls or adjustments or
• Install in accordance with the supplied performance of procedures other than those
this User Guide. specified herein may result in hazardous
exposure.
• Do not install or operate near any heat
sources such as radiators, stoves, or other Important
apparatus that produce heat.
This TV generates, uses and can radiate radio
• Protect the power cord from being walked frequency energy and, if not installed and
on or pinched, particularly at plugs, and the used in accordance with these instructions,
point where it exits from the TV. may cause harmful interference to radio
communication. However, this is no guarantee
• Do not allow the power cord to overhang
that interference will not occur in a particular
the edge of a table.
installation. If the TV does cause harmful
• Unplug this TV during lightning storms or interference to electrical devices, which can
when unused for long periods of time. be determined by turning the TV off and on,
6 23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide

Safety Information
the user is encouraged to try to correct the

interference by one of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the

external device and the TV.
• Connect the external device into an outlet

on a circuit different from that to which the
TV is connected.
• Consult the dealer or an experienced radio/

TV technician for help.
Electrical Information
Mains Supply
The mains operating voltage is detailed on the
rating plate on the rear of the TV.
The mains lead on this equipment may be

supplied with a moulded plug incorporating
a fuse. Should the fuse need to be replaced,
an ASTA or BSI approved BS1362 fuse must
be used of the same rating. If the fuse cover
is detachable never use the plug with the
cover removed. If a replacement fuse cover
is required, ensure it is of the same colour
as that visible on the pin face of the plug. If
there is no alternative to cutting off the mains
plug, dispose of it immediately, having first
removed the fuse, to avoid a possible shock
hazard by inadvertent connection to the mains
supply.

Parts Identification
FRONT PANEL
1. IR sensor window
2. Indicator (the indicator is red when in standby mode, and blue when working normally).
3. Mains Switch
1
3 2
LOCAL KEYBOARD PANEL
1 2 3 4 5 6 7 8 9
1. Start of play or pause of play

2. Take the disc out
3. Select input source
4. Enter or exit menu
5. Decrease channel number
6. Increase channel number
7. Decrease sound volume
8. Increase sound volume
9. Switch between standby
and power-on mode
COVER SIDE TO BACK

Parts Identification
SIDE PANEL
1
2
4
5
1. 12V DC power input (intended for feeding
6 to the TV using a car battery power or
external 12V DC power supply adapter)
7 2. HDMI input
3. PC VGA input
8 4. SCART connecting terminal
5. CI connector
9 6. S-VIDEO input
7. CVBS input
10 8. CVBS / S-Video Left audio input
11 9. CVBS / S-Video Right audio input
10. PC audio input
12 11. Audio Earphone output
12. TV signal input
13 13. USB connector

Connecting the TV
WARNING! ENSURE THE TV AND VGA cable

ALL ANCILLARY EQUIPMENT IS
You can use your TV as a monitor for your
UNPLUGGED FROM THE MAINS
personal computer by using a VGA cable.
BEFORE MAKING ANY CONNECTIONS!
Sound from your personal computer may also
be played through the TV. This requires the
audio output of the personal computer to be
Connecting the TV antenna connected to the AUDIO IN connection of the
TV.
Connect the TV antenna to the aerial socket
S-VIDEO lead
with a 75 ohm co-axial plug. For best results
You can connect this TV to a compatible
use a high gain TV aerial, preferably roof or
device using an S-VIDEO lead.
loft mounted.
• To improve picture quality in a poor signal Component Input

area, purchase and install a signal amplifier. (CVBS cables)
• If the antenna needs to be split for two You can connect this TV to a compatible
TV‘s, use a 2-Way Signal Splitter device using CVBS cables. Connect
(not supplied). the red, white and yellow outputs to
the matching coloured inputs on the
Connecting external devices compatible device. An additional audio
input is required.
Note: The TV will connect through
the HDMI cable by default. Only use
USB connector
the HDMI cable and one other option. This product has a USB 2.0 interface;
Connecting more than one option you can play music, movie and picture
files from USB equipment. USB refers
may cause interference.
to Universal Serial Bus. Most of the USB
devices on the market are USB 1.1 or
USB 2.0. There are some types USB 1.1
HDMI lead devices:
You can connect this TV to a compatible Monitors Communication devices, Audio,
Human Input Device (HID), Mass storage,
device using a HDMI lead. This method will
Most flash memory, USB HDD etc.
give the best picture. Belongs to Mass Storage Class.
Mass Storage Class includes 2 transport
Connect the cable from the HDMI equipment
manners:
to the TV HDMI socket.
1. USB 1.1 Mass Storage Class
Control/Bulk/Interrupt (CBI) Transport
SCART lead 2. USB 1.1 Mass Storage Class
Bulk-Only Transport. This unit supports
You can connect this TV to a compatible USB 1.1 Mass Storage Class Bulk-Only
device using a SCART lead. The connection Transport, we are not sure that other USB
uses component video signals, i.e. the red, devices can be supported! So please
green and blue (RGB) content of the video are find out about the features of USB
sent on separate signals. equipments before using it.

Connecting the TV
CONNECTING DIAGRAM
NOTE
You should insert all necessary cables BEFORE pluggin g in po wer cor d.

Common Interface slot
COMMON INTERFACE
The Common Interface (CI) slot is designed to

accept the Conditional Access Module (CAM)
and Smart Card in order to view the pay TV
programmes and additional services. Contact
your Common Interface service provider to
get more information about the modules and
subscription.
Note: Conditional Access Modules and
Smart Cards are sold separately.
WARNING: SWITCH OFF YOUR TV

BEFORE ANY MODULE IS INSERTED IN
THE COMMON INTERFACE SLOT.
The CI slot is located on the side of your TV.

Insert the CAM correctly into the CI slot, then
add the Smart Card to the CAM.

Wall Mounting
WALL MOUNTING
Suitable for wall mounting - VESA 100 x 100 mm
1. The base must first be removed. Place

the TV face down.
2. Remove the three screws holding the
base in position.
3. Remove and store the base and
screws.
4. Use four machine screws (M4 x 10 mm)
to mount the TV on the bracket.
Mounting the wall bracket - please refer

to the user instructions supplied with
the wall bracket (not supplied).

BATTERY INSTALLATION
Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of
the battery to the -/+ marks inside the battery compartment, as follows:
BATTERY LIFE
Normally, battery can be used for one year.
If the remote control is still not working, when very near to the TV's remote sensor window,
please use new batterys.
Please use SUM-4(AAA) battery.
NOTES
Never use rechargeable battery.
Never charge, short-circuit, disassemble and heat the battery, or throw it into fire.
Pay attention not to fall or knock the remote controller, which will cause damage or
function failure to it.
Do not use a new and an old battery together.
When not using the remote controller for a long time, please take out the battery to avoid
liquid leakage. Before replacing a new battery, please clean the electrolyte in the remote
controller.
If electrolyte splashes into the body, please clean it with water.
CAUTION：
Please put the battery into a place children cannot touch. If swallow by accident, please
contact your local doctor immediately.

Let's Start
SWITCHING ON
After the unit has been suitably placed / fixed, on the desk or on the wall, and all necessary
cables including the power have been connected, the next you should do is:
Press the [STANDBY] button on the remote control to make the unit switch to power-on
mode - you will see the LED indicator turn blue. Now you can enjoy the many features of
your new TV.
STANDBY
INDICATOR
SELECTING SOURCE OPERATION
You can select input source by using source menu. Press [SOURCE] button to show the
menu as follows:
Input Source
DTV
ATV
SCART
AV
S-VIDEO
DVD
VGA
HDMI
USB
EXIT OK
The current source item is highlighted. Press [ ] button on the remote control
or [ CH+/CH- ] key on the front of LCD TV to select your required source. Press [ ] button,
[VOL+/VOL-] key or [OK] button to confirm your choice .

DTV Menu Setup
In D TV mode, press [SETUP] button into the main menu and the main menu will show as follows:
Press [ ] button on the remote control, you can select main menu sections
(main menu sections consist of) " DTV SETTING " , " PICTURE ", " SOUND " , " FUNCTION ") .
Press [ ] or [OK] button to enter this menu section.
Press [ ] button on the remote control to select the item, and then press [ ] button to
adjust parameter value. Press [SETUP] button to return to main menu sections.
DTV SETTING DTV SETTING
Auto Tuning
Select DTV SETTING item to adjust channels.
Manual Tuning
You may select auto Tuning, Manual Tuning,
Programme Edit
Programme Edit, Audio Language, Subtitle
Audio Language English
Language, PVR File System and Preference. Subtitle Language English
PVR File System

Preference
Select Adjust SETUP Return
Auto Tuning item enables you to adjust channel setting automatically.
Channel Tuning DTV SETTING

6 %... UHF 24
Auto Tuning
Manual Tuning
Do you want to exit tuning?
DTV : 0 Programme(s)
Programme Edit
Radio : 0 Programme(s) Please select country first,
Audio Language Englishinfo.
Then select Start to update
Yes No
Subtitle Language English
Country selection Australia

Time Off
SETUP exit
New
Preference Add Cancel
EXIT exit
Manual Tuning item enables you to change channel settings.

Manual Tuning
VHF 5 104.50MHz
Please select channel then

Press OK to search
Programme Edit item enables you to enter submenu. NO SIGNAL
Bad Normal Good

Programme Edit
DTV 5 five
DTV 16 QVC
DTV 17 UK Gold EXIT OK SETUP
DTV 23 bid-up.tv
DTV 25 TCM
DTV 26 UK Style
DTV 27 Discovery
DTV 28 DiscoveryH&L
DTV 32 Cartoon Nwk
DTV 33 Boomerang Note: If LCN function is enabled, then the manual sorting
of digital TV programmes is not allowed.
DELETE MOVE SKIP FAV

DTV Menu Setup
Audio Language item enables you to adjust audio language. Audio Language
MPEG English L R
MPEG English VI
EXIT SETUP OK
Subtitle language item enables you to adjust subtitle language. Subtitle Language
Off
English
EXIT OK SETUP
PVR File System item enables you to view status of external USB storage device and get ready it for
PVR function.
PVR (Personal Video Recorder) REMOTE CONTROL KEY FUNCTIONS
PVR RECORD key: RED/GOTO
Starts recording the program. The second click hides
the Program recording menu and shows the time recording
programs. Switches from EPG to Recorder menu.
PVR PLAY key:
Starts the playback.
PVR REWIND key:
Rewinds at high speed. Each time you press this button the
rewind speed is increased.
PVR FAST FORWARD key:
Fast forward at high speed. Each time you press this button
the fast forward speed is increased.
PVR LIST key: BLUE/ANGLE
Displays the recorded programs list.
PVR PAUSE key: II/
Pauses the play of recorded program.
PVR STOP key:
Stops a recording or go to the live program.
PVR PREVIOUS key: I
To go back to the previous recorded program.
PVR NEXT key: I
To go forward to the next recorded program.

DTV Menu Setup
USB PVR FUNCTIONS
DTV SETTING
Imagine coming home to your own personal
library of television programs, movies, and Select Disk C:
sports that you can watch whenever it's Check PVR File System Start
convenient for you. USB Disk
Format
Rewind and replay programs so you don't Time Shift Size
miss them. Speed
Record your favourite programs and view
Max record time 6 Hr.
them as many times as you want.
Note: PVR function requires external USB Memory Stick
device (not supplied) plugged in to USB conector on TV.
The PVR File system menu description
DTV SETTING
Select Disk: Select the disk as a PVR file system disk.
Check PVR File System: check the USB disk format. Select Disk C:
USB Disk: Display the USB Disk activation Check PVR File System Start
status, "PASS" flag means, that the disk is active. USB Disc
File System Size
Format: Format the USB disk, create PVR file Format English
All SD 54 Min.
system on the disk. Time Shift Size Off
Speed: Shows read and write speed. Speed OK Cancel

Max record time: Set the maximum recording time Max record time 6 Hr.
in hours.
USB PVR Digital Video Record

Insert a USB Memory Stick device, select PVR File System option under the DTV SETTING
menu, then select Check PVR File System option. If the USB Memory Stick device is not
previously formatted, then the system will prompt USB Memory Stick device formatting.
You can set File System Size before formatting (all disk capacity is default).
Press the [RED] key while having no menu to start the program recording.
Press the [RED] key repeatedly to shrink the information
to the bottom right corner of screen.
Recording 08 : 26
REC REC
33 BBC World
[ 00:00:12 ] No Information (02:27:43) [ 00:00:12 ]
Press [ ] key to stop the recording.
Note:
The recording will stop, when the USB disk will become full.
You can pass EPG menu to set the begining time
of the desired TV program.

DTV Menu Setup
Recorded List - Programme
While no menu is present, press the [BLUE] Guinness World Rec...
key to get the recorded programs list.
Sport
Press [ ] key to play or [ II/ ] to pause
World News
the selected program.
I
Press [ ] key to go forvard for the next
recorded program.
I
Press [ ] key to go back for the previous
recorded program.
During the playback You can use
rewind / forward [ / ] keys.
DELETE INFO LIST
Important Information About USB PVR function
USB Memory stick must be at least 1GB in capacity. Maximum recording time and time shift depends on disk space.
VIP - When formatting USB device, it will delete all existing recordings and data stored on the USB.
If USB device has a virus, format function may not work.
Has multiple partitions such as the use of mobile hard disk, you can select the corresponding PVR letter
from PVR File System menu.
PVR function will only work if the external USB device has it's own power supply.
Records in DTV video format (TS streams).
PVR function is only available in DTV source.
USB device must be compatible USB 2.0 HS specification.
Preference item enables you to enter the lock system submenu.
DTV SETTING
Lock System item enables you to lock the auto tuning,
manual tuning, programme edit and block Lock System Off
programme. if you want to change the lock system, Change Password

you must enter default password (0,0,0,0) first. Block Programme
Parental Guidance
Please enter password
Off
CI Infrormation _ _ _
Time
LC

DTV Menu Setup
Change password item enables you to change the DTV SETTING

locked password.
Lock System Off
Change Password
Block Programme
Parental Guidance Off
Please enter password
CI Information
New _ _ _
Time Confirm _ _ _ _
LC
Block Programme item enables you to set the lock

channel. Block programme
DTV 5 five
DTV 16 QVC
DTV 17 UK Gold
DTV 23 bid-up.tv
DTV 25 TCM
DTV 26 UK Style
DTV 27 Discovery
DTV 28 DiscoveryH&L
DTV 32 Cartoon Nwk
DTV 33 Boomerang
EXIT LOCK SETUP OK
Parental Guidance item enables to set guidance DTV SETTING

(0ff, from 4 to 18). Lock System Off
Change Password
CI Information item enables to read the SMART card
Block Programme
information.
ParentalGuidance Off
CI Information
Time
LCN Off

DTV Menu Setup
Time item enables you to enter submenu. DTV SETTING
Clock __ __ __ __
Time Zone to adjust the time zone from Canary
Time Zone Canary GMT
GMT to Berlin GMT+1.
Daylight Off
Daylight to adjust summer time off or on.
LCN item enables to set on or off the automatic sorting of

digital TV programmes according the logical channel numbers (LCN).
The sorting is performed during the tuning of TV channels. It works, if the DTV station in selected
country provides the logical channel numbers.
Note: If LCN function is enabled, then the manual sorting of digital TV programmes is not allowed.
Favourite List item enables to display favourite channel and

FAVOURITE LIST
select the current channel in the list.
DTV 5 five
DTV 16 QVC
DTV 17 UK Gold
EXIT SETUP OK

DTV Menu Setup
ELECTRONIC PROGRAM GUIDE (EPG)
By pressing the EPG button, an Electronic
Program Guide is displayed. The EPG PROGRAMME GUIDE DTV 5 five
14:35 -15:38 The Streets of San Frandsco
supplies information, such as program 10 Mar 2004 14:53
lists, start and end times of all available DTV

10 Mar
14:30 15:30
channels. In addition, the detailed 5 five L... The Streets of San Francisco No Information
information about the program is often 16 QVC Gold Workshop With Jan Springer
available in the EPG. (The availability 17 UK Gold No Information
and the amount of program details will 23 bid-up.tv No Information
vary depending on the broadcaster.) 25 TCM No Information
26 UK Style
Press RED button to enable PVR by EPG function. No Information
Press GREEN button to start Schedule function. EXIT OK Info Rec Schedule DATE Reminder
Press YELLOW button to enable DATE function.

Press BLUE button to enable EPG reminder.
Press Info button to view program information.
INFORMATION five
DTV
To obtain more information about present 576i

SD MPEG
and following events, you can press twice
[OK] button. Like previously, the
following event is displayed by pressing The Streets of San Francisco 14:54
the [ ] buttons (toggle between present Wed Mar 10 2004 14:35 15:38 Next
Subtitle English MHEG5 576i

and following events):
Entertainment
The cases of Detective Mike Stone and his partner Steve Keller.
PICTURE
PICTURE
Picture Mode User
Select PICTURE item to adjust picture parameters. Contrast 70
You may adjust Picture Mode, Contrast, Brightness, Brightness 55
Colour, Sharpness, Tint and Preference. Colour 50

Sharpness 50
Picture mode item can be changed between Tint 0

User, Standard, Soft, Dynamic Preference
You may adjust Brightness, Contrast, Colour, Select Adjust SETUP Return
Sharpness, Tint for User mode.
Preference item enables you to enter the sub menu. PICTURE

Colour Temp. item can select colour temperature Colour Temp Normal
mode: Standard, Warm, Cool and User. Red 70
Noise Reduction item can select reduce noise Green 55

mode: Off, Low, Middle, High. Blue 50
NoiseReduction Middle

DTV Menu Setup
SOUND
Select SOUND item to adjust sound parameters.
SOUND
You may adjust Sound Mode, Treble, Bass,
Sound Mode User
Balance, Auto Volume and Surround Sound.
Treble 75
Bass 50
Sound Mode item can be changed between Balance 50
Music, Film, News, User. Auto Volume Off
Surround Sound Off

Auto Volume item enables you to adjust off or on
for control volume automatic.
Surround Sound item enables you to select off or
on for surround sound.
FUNCTION
Select FUNCTION item to adjust function parameters. FUNCTION
You may select Language, Sleep Timer, Aspect Language English
Ratio, Blue Screen and Restore Setting. Sleep Timer Off
Aspect Ratio 16:9

Blue Screen On
Region Other
Restore Setting
Language item enables you to select the OSD

language. Select OK Enter SETUP Return
Sleep Timer item enables you to set the sleep timer

(Off,10min,20min,30min,60min,90min,120min,180min and 240min)
Aspect Ratio item can be changed between: Auto,16:9, 4:3, ZOOM1, ZOOM2
Auto,ZOOM1, ZOOM2 not valid for VGA mode.
Blue Screen item can be changed between On and Off.
Restore Setting item enables you to reset all values to default.

USB Operation
BRIEF INTRODUCTION

7KLVSURGXFWKDVD86%LQWHUIDFH\RXFDQSOD\PXVLFPRYLHDQG
SLFWXUHILOHVIURP86%HTXLSPHQW
86%UHIHUVWR8QLYHUVDO6HULDO%XV0RVWRI86%GHYLFHVRQWKHPDUNHW
DUH86%RU86%7KHUHDUHVRPHW\SHV86%GHYLFHV
0RQLWRUV&RPPXQLFDWLRQGHYLFHV$XGLR+XPDQ,QSXW'HYLFH+,'0DVV
VWRUDJH0RVWIODVKPHPRU\86%+''HFW%HORQJVWR0DVV6WRUDJH&ODVV
0DVV6WRUDJH&ODVVLQFOXGHVWUDQVSRUWPDQQHUV
86%0DVV6WRUDJH&ODVV&RQWURO%XON,QWHUUXSW&%,7UDQVSRUW
86%0DVV6WRUDJH&ODVV%XON2QO\7UDQVSRUW7KLVXQLWVXSSRUWV86%
0DVV6WRUDJH&ODVV%XON2QO\7UDQVSRUWZHDUHQRWVXUHWKDWRWKHU86%
GHYLFHVFDQEHVXSSRUWHG6RSOHDVHILQGRXWDERXWWKHIHDWXUHVRI86%
HTXLSPHQWVEHIRUHXVLQJLW

USB Operation
PLAYBACK
Press [SOURCE] button to select USB source and insert USB equipment,
the USB operation menu appears on screen as below.

1
4
2
\SUBTITLE\
1. Avi
Size: 4240K Bytes

5
EXIT EXIT OK ENTER SELECT

1: State window Display the current playing mode.
2: DIR window Display the path.
3: File window Display the current path's file.
4: Preview window Movie playing or image preview window.
5: Information window Display the current file‘s information.
Press to select playing mode and press [OK] button to enter.

Thus current playing mode is highlighted.
,WHP
WHP GHVFULSWLRQ
GHVFULSWLRQ
0XVLFPRGH

0RYLHPRGH

3KRWRPRGH


USB Operation

Notes:
1. This product supports MP3, MPEG1, MPEG2, AVI, JPEG and BMP format
files.
2. The file system supports FAT16, FAT32 and NTFS.
3. MTP (Media Transfer Protocol) is not supported.
4. Please connect directly to the USB port of your TV. If you are using a
separate cable connection, there may be a USB compatibility problem.
5. Before connecting your device to the TV, please back up your files to
prevent them from damage or loss of data. The manufacturer is not
responsible for any data file damage or data loss.
6. Do not disconnect the USB device while it is loading.
7. If you want to change playing mode, firstly you have to exit current playing
mode through pressing [EXIT] button.
8. The higher the resolution of the image, the longer it takes to display on the
screen.
9. For unsupported or corrupted files, the ‘Unsuported format’ message is

displayed.

USB Operation
PLAY MUSIC
1. Press button to select " "item and press [OK] button to enter.
Press
2. button to select the directory you desire and press [OK]
button to confirm. Select " " item and press [OK] button to return previous
path.
3. Press button to select the file you desire and press [OK] button to
confirm.
4. Press [ ] button to pause playing and press button to resume.

5. Press to stop playing.
6. You can set the repeat mode. Press [REPEAT] button to set the mode: off,
repeat one or repeat all.
Press [EXIT] button to exit music mode.

PLAY MOVIE
1. Press button to select " "item and press [OK] button to enter.
Press
button to confirm. Select " " item and press [OK] button to return previous
path.
confirm.
4. Press button to play full screen, and exit full screen by pressing
or [exit] button.

USB Operation
OPERATE IN FULL SCREEN STATE
1. Press [SETUP] button to enter into the main menu. The menu setup is the

same as AV mode. You can find it in preceding pages.
2. Press [ ] button to pause playing/steps playback in pause mode and
press button to continue playback.
3. Press button and the unit begins fast forward playback.
Press button each time and the program playback speed switches in the
following sequence circularly:
Play -> 2x fast forward ->play
PLAY PHOTO
1. Press button to select " " item and press [OK] button to enter.
Press
button to confirm. Select “ “ item and press [OK] button to return previous
path.
confirm.
4. Press button to play full screen, and quit full screen by pressing
or [EXIT] button.
5. Press button in full screen mode to turn to the last or next page.


ATV Menu Setup
This product can store up to 99-channel programs (1 99). You can select your favourite
channel through pressing [CH+/-] or number buttons, and you can scan and store all of the
channels through manual or automatic mode.
In ATV mode, press [SETUP] button into the main menu and the main menu will show as follows:
Press [ ] button on the remote control, you can select main menu sections
(main menu sections consist of " ATV SETTING " , " PICTURE ", " SOUND " , " FUNCTION ") .
Press [ ] or [OK] button to enter this menu section.
Press [ ] button on the remote control to select the item, and then press [ ] button to
adjust parameter value. Press [SETUP] button to return to main menu sections.
ATV SETTING
ATV SETTING
Channel 17
Select ATV SETTING item to adjust channels.
Colour system AUTO
You may select Channel, Colour System,
Audio system DK
Audio System, Fine-Tune, Manual Tuning,
Fine - Tune 224.25MHz
Auto Tuning and Programme Edit.
Manual Tuning
Channel items enables you to change the channel Auto Tuning
number.
Programme Edit
Colour System item enables you to select the colour Select Adjust SETUP Return
system: "AUTO", "PAL" and "SECAM".
Audio System item enables you to select sound

system:"BG","DK","I" and "L".
Fine-Tune item enables you to adjust the channel frequency accurately to make the sound
and picture effect better.
Manual Tuning item enables you to change channel settings.
NOTES
System will set "AUDIO SYSTEM" automatically. In some special conditions, "AUDIO
SYSTEM" setting will be wrong, please adjust manually.
"COLOUR SYSTEM" and "AUDIO SYSTEM" mode are according to the local ATV
broadcasting system.
If the local system is SECAM L, set the "REGION" to "FRANCE",
please refer "Function" in P 33.
Channel Tuning
Auto Tuning item enables you to adjust channel setting automatically. Channel Tuning
9 %... 119.75MHz
TV : 0 Programme(s)
Do you want to exit tuning?
SETUP exit
Yes No
EXIT exit

ATV Menu Setup
Programme Edit item enables you to enter submenu to
Programme Edit
set channel DELETE, RENAME, MOVE, SKIP, FAV.
TV 1 S-42
Press RED button to delete channel. TV 2 C-04

TV 3 S-02
Press GREEN button to rename channel. TV 4 S-04

TV 5 S-04
Press YELLOW button to move channel. TV 6 S-05
TV 7 S-06
Press BLUE button to SKIP channel. TV 8 S-07
TV 9 S-08
Press FAV button to set favourite channel. TV 10 S-09
DELETE RENAME MOVE SKIP FAV
Programme Edit
TV 1 S-42
TV 2 C-04
TV 3 S-02
TV 4 S-04
TV 5 S-04
TV 6 S-05
TV 7 S-06
TV 8 S-07
TV 9 S-08 RENAME
TV 10 S-09
EXIT SETUP
PICTURE PICTURE
Picture Mode User

Select PICTURE item to adjust picture parameters. Contrast 70
You may adjust Picture Mode, Contrast, Brightness, Brightness 55
Colour, Sharpness, Tint and Preference. Colour 50
Sharpness 50
Picture Mode item can be changed between
Tint
User, Standard, Soft, Dynamic. 0
Preference
You may adjust Brightness, Contrast, Colour,
Select Enter Return
Tint for user mode. OK SETUP
NOTES PICTURE
You can't adjust TINT while watching TV channels. Colour Temp Normal
Red 70
Green 55
Preference item enables you to enter the sub menu.
Blue 50
Colour Temp. item can select colour temperature NoiseReduction Middle
mode: Standard, Warm, Cool and User.

Noise Reduction item can select reduce noise
Select Enter SETUP Return
mode: Off, Low, Middle, High. OK

ATV Menu Setup
SOUND
SOUND
You may adjust Sound Mode, Treble, Bass,
Sound Mode User
Balance, Auto Volume and Surround Sound.
Treble 75
Bass 50
Balance 50
Sound Mode item can be changed between
Auto Volume Off
Music, Film, News, User.
SurroundSound Off
Auto Volume item enables you to adjust off or on
for control volume automatic.
Surround Sound item enables you to select off or Select Adjust SETUP Return
on for surround sound.
FUNCTION
You may select Language, Sleep Timer, Aspect Ratio, Language English
Blue Screen, Region and Restore Setting. Sleep Timer Off
Aspect Ratio 16:9
Language item enables you to select the OSD Blue Screen On

language. Region Other
Restore Setting
( Off,10min,20min,30min,60min,90min,120min,180min
and 240min). Select OK Enter SETUP Return
Aspect Ratio item can be changed between: Auto,16:9, 4:3, ZOOM1, ZOOM2
Auto, ZOOM1, ZOOM2 not valid for VGA mode.
Region item enables you to set the analogue TV region.

Teletext Function
Most TV stations provide cost-free teletext information, including the latest news, weather
information, TV program list and stock information etc. You just input the needed teletext
page according to the teletext content.
Note : Press [CANCEL] button to cancel teletext.
ZOOM IN TELETEXT
When teletext page shows, you may double zoom in to display this teletext page;
Press [SIZE] button to zoom in the upper half part of the teletext page;
Press [SIZE] button again to enter the lower half of the teletext page;
Press this button once more to return to the original display mode.
DISPLAY MODE
Press [REVEAL] button to display the hidden teletext information. Press this button
again to cancel .
COLOURIZED BUTTONS (RED, GREEN, YELLOW, BLUE)
Select the corresponding teletext page through colourized buttons.

VIDEO Menu Setup
VIDEO SETTING MENU
The menu setup of SCART/ S-VIDEO/ HDMI modes is the same as that of the TV mode,
except the " "section . You can find it in preceding pages.
NOTE
If no signal input in DTV, ATV, SCART/ AV / S-VIDEO/ HDMI, the screen will show as below.
This unit will switch to standby mode automatically if there is no signal input more than 5 minutes.
SCART
NO SIGNAL
4:50

VGA Menu Setup
The VGA mode supported up to 1920X1080@75Hz, you can use this unit as a
multimedia PC monitor. When this unit works in VGA mode, the following setup can
be done.
Press [SETUP] button to enter main section. Press [ ] button to select sections and then
press [ ] button or [OK] button to enter. If all is complete, please press [SETUP] button twice to
exit and your setup data will be saved automatically.
VGA SETTING
Select VGA SETTING item to adjust such VGA SETTING

parameters as Contrast, Brightness,
Contrast 75
H-offset, V-offset, Frequency, Phase, Brightness 50
Auto Adjust. H-Offset 50
V-Offset 50
Frequency 0
Phase 60
Auto Adjust
Select OK Enter SETUP Return
NOTE
When your PC goes into standby mode, the screen will show
as right side. This unit will go into sleep mode if no signal
input for 5 minutes. In this mode, the indicator will remain VGA
green, and the screen will turn off. You can wake it up by NO SIGNAL
waking up your PC.
1 : 50
SOUND
You may adjust Sound Mode, Treble, Bass, SOUND
Balance, Auto Volume and Surround Sound. Sound Mode User

Treble 75
Bass 50
Balance 50
Sound Mode item can be changed between
Auto Volume Off
Music, Film, News, User.
SurroundSound Off
Auto Volume item enables you to adjust Off or On
for controlling volume automatically.
Surround Sound item enables you to select Off or

On for surround sound.

VGA Menu Setup
PICTURE
PICTURE
Colour Temp Standard

Select PICTURE item to adjust such parameters
Red 50
as Colour Temp, Red, Green, Blue. Green 50
Blue 50
Colour Temp item can be set to: User, Standard,

Warm and Cool.
Red, Green and Blue items enables you to adjust
RGB value of colour temperature. Select OK Enter SETUP Return
NOTE
The picture will be displayed incorrectly while adjusting.
FUNCTION
Blue Screen and Restore Setting. Sleep Timer Off
Aspect Ratio 16:9

Blue Screen On
Region UK
Restore Setting

language. Select OK Enter SETUP Return

(Off, 10 min, 20 min, 30 min, 60 min, 90 min, 120 min, 180 min and 240 min).
Aspect Ratio item can be changed between 16:9 and 4:3.

DVD Operation
Warning!
Use only DVD (Ø 120 mm) discs, don’t use MINI DVD (Ø 80 mm).
BRIEF INTRODUCTION
DVD provides brand-new AV effect for consumers with its extraordinarily large capacity and
outstanding audio-video effects. Its capacity is as high as 4.7-17 GB (approximately 7-26 times the
CD capacity) and horizontal resolution of picture is above 500-line.
Comparison between DVD and other Discs
DVD LD SVCD VCD CD CDROM
Recording Method Digital/MPEG2 Analogue Digital/MPEG2 Digital/MPEG1 Digital Digital
Single Single Double- Double-

sided sided sided sided 650MB 650MB
Capacity 650MB 650MB
1 layer 2 layers 1 layer 2 layers
4.7G 8.5G 9.4G 17G
266min 1 side 60min. 45min 74min

Playback Time 133min 242min 484min 74min
2 sides 120min.
Disc Diameter 12CM 30CM 12CM 12CM 12CM 12CM
Horizontal Resolution 500 lines or more 430 lines or more 350 lines or more 250 lines or more
Aspect Ratio Multiple One
Subtitle 32 types Max. 16 types
Audio Linear PCM

Linear PCM Linear PCM
FM modulation
Sound Quality 48kHz 96kHz/16 20 24bit 44.1kHz/16bit 44.1kHz 44.1kHz/16bit
Function Introduction
Multiple languages and subtitles

DVD disc can support as many as 8 dubbing languages and 32 subtitle languages.
Multiple story plots

User can select to play the desired plots (the beginning, development or ending) of the same disc.
Multiple aspect ratios

Multiple aspect ratios support various TV screens.

DVD Operation
TV Screen
Disc Pictures 4:3
16:9
Pan-Scan Letterbox
4:3
16:9
FEATURES
This player employs the new generation MTK decode chip with more convenient system
and more stable operation. Super error correction slot-in loader with twin laser with good
shockproof performance.
Brand-new AV Effects
1 Compatible with MPEG 4 format discs to produce wonderful pictures.
2 108MHz/12bit video DAC with more vivid and brilliant pictures.
3 Progressive-scan video outputs to eliminate the flickers not rectified by
interlacing scan and therefore your eyesight will be well-protected. At the same time,
the pictures definition is sharply enhanced and the pictures will be finer, smoother
and more stable.
Convenient Functions
1 Direct entry into desired scenes (title/chapter/time/track search).
2 Multi-level zoom in/out playback function to provide you with brand-new enjoyment method.
3 Multiple aspect ratios to fit TV sets of various screen ratios.
4 Parental lock function to prevent children from watching unsuitable discs.
5 Multiple dubbing languages and subtitle languages bring you the best entertainment status
all the time.
Super compatible with VCD, SVCD, CD, HDCD, KODAK PICTURE CD etc.
NOTE: * Some discs labelled with MPEG4 on the market actually are *.rm/*.ra/*.ram/*.rmm and others
which are not compatible. Please take care when buying discs.

DVD Operation
DVD Operation
COMPATIBLE DISC TYPES
Types Sizes Recorded Contents
12cm DVD: Compressed digital audio + compressed digital video (dynamic picture)
12cm SVCD: Compressed digital audio + compressed digital video (dynamic picture)
MPEG4 12cm MPEG4: Compressed digital audio + compressed digital video (dynamic picture)
DIGITAL VIDEO
12cm VIDEO CD: Compressed digital audio + compressed digital video (dynamic picture)
12cm CD-DA: Digital audio
NOTES
Issues related to DVD MPEG4 SVCD VCD CD
These icons on the top banner indicate the disc types that the function described in the section applies to.
VCD
DVD Applies to VCD disc
Applies to DVD disc
MPEG4 CD
Applies to MPEG4 disc Applies to CD disc
SVCD
Applies to SVCD disc
This model does not support the 8cm disc. Do not insert that type of disc into this device
to prevent a disc jam.
This model supports DIVX playback, but with data rate of up to 10Mbps.
Region code
If the region code of the disc being played
does not match the region code of this DVD
player then the disc cannot be played. If you
do try to do this a region violation notice will
appear on the screen.
The region code for this player is region 2
(refer to the symbols below).

DVD Operation
PLAYBACK
DVD MPEG4 SVCD VCD CD
1. Power on and switch signal source to DVD mode and the unit begins to work.
2. Place the disc (with label side facing user) to the door and the unit will draw in the disc
automatically.
The unit begins to read disc information.
3. Press [PLAY] button to begin playing disc.

When the unit is playing a disc, press[ ] button the first time and the unit enters pause state, while
press [ ] button again and the unit resumes playback.
4. Press [STOP] button to stop playing.

When the unit is playing a disc, press [ ] button the first time and the unit enters pre-stop state,
while press [ ] button again and the unit enters stop state.
At the pre-stop state, if you press [ ] button, the unit will continue to play from the stopped point.
At the stop state, if you press [ ] button, the unit will play from the beginning point of the disc.
Press [ ] button when playing MPEG4 discs and the unit enters stop state directly.
5. Press [ ] button to take out disc.

6. When finishing playing, switch signal source to other working state and press [ ]
button to make the unit enter standby state. Please pull out the power plug from power
socket when not using the unit for a long time.
[ ] button is effective only when selecting DVD signal source. In other signal source ,such as TV,
AV, etc, this button is invalid.
VOLUME CONTROL
1. Press [VOL+/VOL-] buttons to adjust volume.

2. Press [VOL+/VOL-] buttons on the remote control of this unit.
Press [VOL+] button to increase volume; press [VOL-] button to decrease volume; the
maximum volume is 100.

DVD Operation
VCD, SVCD MENU PLAYBACK
SVCD VCD
When playing SVCD, VCD2.0 discs with the menu playback function, you may enjoy simple
menu playback alternative function. You may set menu playback state in the setup
menu and select menu playback or sequence playback.
For instance, VCD 2.0 disc menu playback.
1. TV screen displays main menu.
1.
2.
Press number buttons to select. For instance, press number button 1 to select main menu 1.
1.
2.
2. After entering main menu 1, TV screen displays submenu.

1.
2.
3.
4.
5.
3. Press [ ], [ ] buttons to turn pages.

4. Press number buttons to select submenu content. For instance,
press number button 5 and the unit begins to play the fifth track.
1.
2.
3.
4.
5.
5. When playing, pressing [DVD-MENU] button to return to the

root menu.
MEMORY
DVD
1. This player can save the currently played time point automatically when you leave the current
DVD disc playback (switch from DVD to card read state, switch from DVD signal source to
other signal source, enter standby state in DVD mode).
2. When switching to DVD playback state again, this player can automatically search the time point
saved last time to continue playing. If you want to play from the beginning, please press [ ]
button twice and then press [ ] button.
NOTE
This player may save one DVD disc for one time.
The DVD disc played the last time will be saved, and the former saved contents will be cleared
by new saved contents.
lf power is cut off unexpectedly, the DVD disc played currently will not be saved.

DVD Operation
SELECT TRACK TO PLAY DIRECTLY BY NUMBER BUTTONS
DVD SVCD VCD CD
1. Insert disc, after disc reading and normal playback, press number buttons to select track
to play directly.
If track number is less than 10, press number buttons 1 to 9 to directly select. For instance,
select the seventh track: 7
If track number is more than or equal to 10, press [-/- -] button and then number buttons 0 to 9.
1 + 6
For instance, select the 16th track -/-- 6
If track number is more than or equal to 20, press [-/- -] button twice and then number buttons
0 to 9. The rest can be performed by analogue.
SELECT LANGUAGE/AUDIO
DVD SVCD VCD CD
1. Press [AUDIO] button.
As for DVD discs with multiple languages, you may select the desired language when playing.
DVD disc:
Audio 1/2 Chinese Audio 2/2 French
As for SVCD, VCD or CD disc with multiple channels, you may select audio output from
left or right channel or select stereo audio output. For VCD disc, left channel records
dubbing and right channel records singing, and you may select left channel for dubbing.
SVCD, VCD, CD disc:

Mono Left Mono Right
Stereo Mix-Mono
NOTE
Language type varies with disc recording.
For VCD story disc with double languages, you may press [AUDIO] button to select
the desired language.
When playing some DVD discs, pressing [AUDIO] button to switch language may
result in playing the track from its beginning.

DVD Operation
REPEAT PLAYBACK
The repeat playback function enables a certain title/chapter/track/disc repeated.

1. Press [REPEAT] button. Each press of REPEAT button may realize different repeat functions.
DVD DISC:
Chapter Title ALL Repeat Off
SVCD, VCD, CD discs:

To SVCD, VCD2.0 discs, the repeat function is effective in sequence playback mode; to VCD1.1,
CD discs, the repeat function may be directly operated.
Track ALL Repeat Off
To SVCD, VCD2.0 discs, the repeat function cannot be operated in menu playback mode.
REPEAT PLAYBACK OF SELECTED SEGMENT

When playing disc, you may press [A-B] button to play your desired segment content repeatedly.
1. In normal playback, press [A-B] button at the beginning point (point A) of the segment that
you desire to play repeatedly.
TV screen displays: A
2. In normal playback, press [A-B] button at the ending point (point B) of the segment that
you desire to play repeatedly.
AB
TV screen displays:
The unit automatically returns to point A and begins to play the selected segment (A-B).
3. Press [A-B] button for the third time.
The unit restores to normal playback.
NOTE
The A-B repeat function may be invalid for some discs. In menu playback mode, the segment
can only be selected in the track.

DVD Operation
FAST PLAYBACK
When playing discs, you may select fast forward or fast backward playback to search for a certain
point.
1. Press [ ] button and the unit begins fast forward playback.
Press [ ] button each time and the disc playback speed switches in the following sequence
circularly: 2X 4X 8X
16X
2. Press [ ] button and the unit begins fast backward playback.

Press [ ] button each time and the disc playback speed switches in the following sequence
circularly: 2X 4X 8X
16X
PLAY FROM THE DESIRED POSITION

Play DVD disc

Inputting a certain time, title number or chapter number directly may search the disc quickly and
then play forward from this position.
1. Search title and chapter. For instance, search the 2nd chapter in title 6.
Press [GOTO] button and TV screen displays:
Title 03/30 Chapter /02
Press [ ] button to move cursor and lighten the title number, shown in the figure:
Title /30 Chapter 01/02
Then press number button 6 to select Title 6, shown in the figure:

Title 06 /30 Chapter /02
Finally press number button 2 to select Chapter 2, shown in the figure:

Title 06 /30 Chapter 02/02
2. Search title time

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to
input hour, minute and second.
Title 06/30 Time : :
3. Search chapter time

Chapter 01/04 Time : :

DVD Operation
Play MPEG4 disc
1. Select track
input the track.
Select
2. Search track time

Go To -:--:--
Play SVCD, VCD and CD discs

1. Search disc time
input minute and second.
Disc Go To --:--
2. Search track time

input minute and second.
Track Go To --:--
3. Select the track
Press [GOTO] button until TV screen displays the following figure. Press number buttons to input
track.
Select Track -- /15
ZOOMING THE DISPLAYED FRAME

DVD MPEG4 SVCD VCD
Zoom in/out the player frame.

1. When playing a disc, press the [ZOOM+/-] button can open the zoom in/out function, and the TV
screen displays( take X2 mode as an example):
The frame is magnified to 2 times of the normal size.

2. Press the [ ZOOM + ] button continually, all the magnified/ minified modes display on the screen
in turn. The magnified/ minified modes includes:2X,3X,4X.
3. Press the [ ZOOM - ] button continually, all the magnified/ minified modes display on the screen
in turn. The magnified/ minified modes includes:1/2,1/3,1/4.
4. When the mode is on 4X, press [ ZOOM + ] button to close the zoom in/ out function, and the
frame restores normal size. When the mode is on 1/4,press [ ZOOM -] button.
5. When the picture is magnified, press the [ ] buttons to move the frame.

DVD Operation
MPEG4 AND JPEG FILE PLAYBACK
MPEG4 is the audio standard published by MPEG(Moving Pictures Experts Group) in

November,1998. As the discrepant parts between frames of picture are only processed and
the same parts are deleted, the data number are greatly decreased. The most distinct
feature of MPEG4 is the high compression and clear imaging. Furthermore, MPEG4 provides
elastic specifications to adjust the stream according to the used requirements. The larger
stream can be used when collecting private films; and the small stream can be used in
network transferring, which make MPEG4 use widely.
JPEG(Joint Photographic Experts Group) is the most widely used picture compression and
storage format today. Utilizing high efficiency compression algorithm, JPEG compresses
the original picture 15 to 20 times with excellent picture quality. JPEG is featuring small
size data, convenient application and supported by most picture processing software, so
it is very fit to store photos.
The strong decoding capability of this unit can decode and play the files with the above
formats. In the course of playing, an operation menu will appear and its construction is
shown as follows.
1 State window 4 Scroll bar window
00:00 00:00
004/369 1 Display the current Indicate the current file's
\PIC\ state information. position.
2
..
3 2 DIR window 5 Preview window
Du000
Du001 4 Display the current JPEG image preview.
Du002 5 path.
6 3 File window 6 Information window
Display the current Display the current operation
path's file. prompts.
The state information in state window is as follows:
1 2 3 4 1 Elapsed playback time
00:57 03:31 128

2 Total playback time
002/073 3 The audio bit rate (generally the bit rate is 128kbps,
sometimes it is VBR.)
5 6 4 Current playback mode indicator
5 Track indicator
6 Dynamic frequency spectrum indicator

DVD Operation
1. Play MPEG4 file
After you put an MPEG4 format file into the unit, it will search disc information and display the
operation menu as figure A (The displayed content varies with disc.).
A: 00:00 00:00
001/004
B: 00:00 00:00
001/369
\ \Du000\
Du000 ..
Du001 A/V
MP000
Du002 A/V
MP001
Du003 A/V
MP002
Press [ ] button to select the directory you desired and press [OK] button to confirm.
For instance, you select the directory Du000 in Figure A, press [OK] button and TV screen
displays as in Figure B. The window returns to the previous directory when you select [ ....]
or press [ ] button.
In Figure B, press [ ] button to select the MPEG4 format file you desired and press [OK]
button to confirm. The unit begins to play MPEG4 format movie.
2. Play JPEG file

After you put an JPEG format file into the unit, it will search disc information and display the
operation menu as in the following figure. After selecting JPEG file, the preview window will appear
this file's preview image to facilitate you to select. After you select the JPEG file you desired and
press [OK] button to confirm, the picture will display in full screen.
00:00 00:00
004/369
\PIC\
..
Du000
Du001
Du002
RESOLUTION 640 480
Other basic operation methods

1. Press [ ],[ ] button may turn to the next or last page.
Other functions of JPEG file

1. When playing JPEG file, press [ZOOM] button to enter zoom in/out, and press it again to
stop this function.
2. When in zoom in/out, pressing [ ] button may magnify the picture and it can magnify the frame
twice at most as the original one. Pressing [ ] button may minify the picture and it can minify
the frame half at most as the original one.

DVD Operation
3. When playing JPEG file, pressing [ ] button may realize preview playback function.
At the same time, all JPEG files are displayed on the TV screen. One frame can display up to
12 pictures at most. The other ones are shown on the next frame. Pressing [ ] button may
enter the next frame and [ ] button may enter the previous frame. You may press number
buttons or [ ] button to select the picture you desired and press [OK] button to confirm.
4. When in preview playback, pressing [DVD-MENU] button may exit preview playback function.
NOTE
When buttons are invalid, TV screen displays:
Please press effective button again.

DVD Function Setup
PICTURE
Select PICTURE item to adjust picture parameters.
You may adjust Picture Mode, Contrast, Brightness, PICTURE
Colour, Sharpness, Tint and Preference. Picture Mode Dynamic
Contrast 50
Picture mode item can be changed between Brightness 50
User, Standard , Soft, Dynamic.
Colour 50
You may adjust Brightness, Contrast, Colour, Sharpness 50
Sharpness, Tint for User mode. Tint 0
Preference
Preference item enables you to enter sub menu.
Colour Temp. item can select colour temperature Select OK Enter SETUP Return
mode: Normal, Warm, Cool and User.

Noise Reduction item can select reduce noise
mode: Off, Low, Middle, High.
SOUND
Select SOUND item to adjust sound parameters. SOUND
You may select Sound Mode, Treble, Bass, Balance,
Sound Mode User
Auto Volume and Surround Sound. Treble 50
Sound Mode item can be changed between Bass 50

Music, Film, News, User. Balance 0
Auto Volume Off
Auto Volume item enables you to adjust Off or On
for control volume automatic. Surround Sound Off
Surround Sound item enables you to select Off or

On for surround sound. Select OK Enter SETUP Return
DVD SETTING
Press [SETUP] button , and the main menu will show as follows:
By pressing [ ] button on the remote control, you DVD SETTING
can select the following items, "General", "Preference", General
press [ ] or [OK] button to confirm. Preference
Select OK Enter SETUP Return

DVD Function Setup
GENERAL SETUP
You may select TV DISPLAY, SCREEN SAVE and
DOWNMIX and Divx.
TV display: this item is used to set the output picture ratio of this unit. General Setup Page
Optional settings: Normal/Pan-Scan, Normal/Letterbox, Wide TV Display LB
Screen; Default: Normal/Letterbox Screen Save On

Downmix Stereo
Divx 1252
Screen Save: Open or close the screen saver
Optional settings: Off, On; Default: On Set TV Display Mode
Downmix: this item is used to set this unit's DOWNMIX mode to change multi-channel audio into
2-channel audio output.
Optional settings: Stereo, LT/RT; Default: Stereo
Divx: this item is used to set the codepage )character encoding table) for MPEG-4 format subtitles.
1252 - West European Latin (used by Western Eurpean languages)
1250 - East European Latin (used by Central & Eastern European languages)
1251 - Cyrillic (used by Belarusian, Bulgarian, Macedonian, Russian, Serbian and Ukrainian languages)
PREFERENCE SETUP
TV Type: To set the output video system of this player.
Optional settings: Auto, PAL, NTSC; Default: PAL
Preference Page
PBC: this item is used to set PBC state. TV Type PAL
PBC On
When playing SVCD, VCD2.0 discs, if PBC is set On, this unit Audio ENG
Subtitle ENG
enters PBC playback mode; if PBC is set Off, the unit plays the Disc Menu ENG
Parental Off
disc according to track sequence. Password
Default
Optional settings: On, Off; Default: On Set TV Standard
Audio: this item is used to set the preference audio language when playing.
Subtitle: this item is used to set the preference subtitle language when playing.
Disc menu language: this item is used to set the preference disc menu language when playing.
Default of disc menu language: English

Default of subtitle: English

DVD Function Setup
NOTE
Audio, subtitle and disc menu language are only effective to DVD disc.
If the disc is not recorded with the language you appointed, the unit will apply the language
that the disc appointed to play.
Select other languages: press [ ] button to move cursor to "OTHER" item, press [OK] button
and then number buttons to input the language code you desire. After input finishes, press
[OK] button again.
Parental: this item is used to set the parental control ratings to prevent children from watching
the restricted contents. (In case the disc supports this function)
Optional settings: KID SAFE, G, PG, PG 13, PGR, R, NC17, ADULT, Off; Default: Off
NOTE
When changing the parental control ratings, a password is needed. Please refer to the
following password item for details.
Password: this item is used to set a four digital password to enable you to change the parental
control ratings.
Old password
Default: 7890
New password
Confirm PWD
Default: this item is used to restore all settings to the default value
OK
except "Parental control" and "Password" in the setup menu.
FUNCTION

Blue Screen and Restore Setting. Sleep Timer Off
Aspect Ratio 16:9

Blue Screen Off
Region Other
language.
Restore Setting
( Off,10min,20min,30min,60min,120min,180min
and 240min). Select OK Enter SETUP Return
Aspect Ratio item can be changed between: Auto,16:9 and 4:3 (Auto is invalid for VGA)

Troubleshooting
Please check for causes of problems in accordance with the following chart before contacting
any maintenance personnel.
DISPLAY TROUBLESHOOTING
Symptom Causes and Correction

Check whether power cord is correctly connected, and
whether this unit is in power on.
Black screen, power
indicator light off Check whether the signal cord of input device is correctly
connected.
Check whether input device is in power on mode.
Check whether the input device signal is in this unit's

specification
Check computer output mode: control panel-display-setup

Image display flicker,
unstable If the setup does not accord with this unit's specification,
please change the display setup
Hor scanning frequency: 30kHz ~ 75kHz
Ver scanning frequency: 50 Hz~75Hz
SOUND AND TV TROUBLESHOOTING
Symptom Causes and Correction
Cannot power on Please make sure the power cord is connected correctly.
Please make sure the audio cord is connected correctly.

No sound
Check volume.
Make sure there is nothing plugged into the headphone jack.
Check volume.
Volume too low
If volume is still too low when adjusting volume to maximum,
please check whether the input device is correctly set.
Snowy picture Input antenna damaged or not correctly connected.
Check whether remote control batteries are functioning.
Check the battery installation is correct.
Remote control failure Check whether an obstacle is between the remote control and the
unit's receiving window.
Check whether the receiving window has a strong light.

Troubleshooting
DVD TROUBLESHOOTING
Symptom Causes Correction
1. Condensation on laser head 1. Switch on power and wait for 1 to 2 hours

Not play 2. Disc not properly loaded 2. Make sure label side of the disc is facing up
3. Disc not compatible with the unit 3. Confirm whether this unit compatible with
the inserted disc
1. Too large volume of connected 1. Adjust the device volume
Sound distortion device
2. Sound field mode not suitable for 2. Adjust appropriate sound field
disc
1. Disc warped or dirty 1. Clean the disc
No sound
2. The unit in mute state 2. Press MUTE button to cancel it.
No image 1. TV not set for proper system 1. Reset AV/TV state of TV
1. TV system not right 1. Try to change the colour system

No colour
2. TV colour not well adjusted 2. Reset the TV colour
1. Disc warped or dirty 1. Clean the disc

No disc reading 2. Disc not correctly placed 2. Reload a disc with label side facing up
3. Condensation on laser head 3. Switch on power, unload disc and leave
it for about 1 hour
1. Mal-fabricated disc used 1. Wait for 5 to 10 seconds to restore to

Temporary normality automatically
2. Wrong buttons pressed 2. Operate again
function failure 3. Static leakage into the unit from
3. Power off for 1 to 2 minutes to power
outside on again
1. No subtitle made in disc 1. Disc problem

No subtitle
2. The unit subtitle is turned off 2. Press Subtitle button to select it
Image rolling 1. System setup not suitable 1. Adjust system mode

for disc
If the above methods still cannot solve the problems or the troubles are special, please
contact the local maintenance personnel.

Specifications
LCD Screen 23.6": 60 cm
Panel Resolution 1920 x 1080
Input signal Video System PALǃSECAM

Frequency Band 42.25-- 863.25 MHz
ATV
BG/DK/I/L/L’
Sound System
NICAM/A2
VLF(50.5-142.5MHz)
Frequency Band VHF(149.5-426MHz
UHF(434-858MHz)
Channel bandwidth 7/8M
DTV
Modulation COFDM 2K/8K QPSK,16QAM, 64QAM
Video System MPEG-2 MP@ML
Sound System MPEG-1 layer 1,2
Basic Functions EPG, Subtitle, Teletext (EURO)
Input Level 1.0Vp-p +/-10%
CVBS
Format PAL,NTSC,SECAM
Format DOSǃVGAǃSVGAǃXGAǃSXGA
Color 24BIT
Analog RGB
H-Frequency 30ü85KHz
V-Frequency 56ü75Hz
USB File format MP3, MPEG1, MPEG2, AVI, JPEG, BMP
Compatibility of Disc CD, HDCD , VCD , DVD, DVD+R, DVD-R, ,

DVD DVD+RW, DVD-RW
Multimedia formats JPEG, MP3, WMA, MPEG-1, MPEG-2,
MPEG-4, DIVX3.xx , DIVX5.11 ;

Specifications
Scart Full Scart
480i,576i,1080i,480p,576p,720p
HDMI Format
1080P
Audio Input
0.22 Vr.m.s.
Level
Comb Filter 3D
Teletext 1000 Page
TV/DTV 1 IEC 75¡

Analog RGB 1 D-SUB 15 Jack
SCART SCART Jack
S-Video 1 Jack
CVBS 3 RCA Jack (Red/White/Yellow)

INPUT
Terminals PC Audio 1 Headphones jack
USB 1 USB 2.0 interface
HDMI HDMI Jack
CI Solt 1 CI Solt
Output Audio 1 Earphone Jack
AC 100-240V 50Hz
Power
Standby Mode ˘1W
Other Amplifier 2 X 6W˄8ȍ˅

Display Mode
Below the preset mode for VGAǃCVBS (pixel formatǃH-Frequency and V-Frequency)
ANALOGIC RGB FORMAT TABLE
Pixel Format Resolution Horiz. Freq. (KHz) Vert. Freq. (Hz) Standard
63.5 60
SXGA 1280X1024 VESA
80.0 75
48.4 60
XGA 1024X768 56.5 70 VESA
60.0 75
37.9 60
SVGA 800X600 47.2 72 VESA
46.9 75
31.5 60
VGA 640X480 37.9 72 VESA
37.5 75
640X480 31.5 60
DOS VESA
720X400 31.5 70
CVBS FORMAT TABLE
Format Resolution Horiz. Freq. (KHz) Vert. Freq. (Hz)
576i 576 15.63 50.00

59.94
480i 480 15.73
60.00
576p 576 31.26 50.00
480p 480 31.47 60.00
1080i/50 1080 28.13 50.00
1080i/60 1080 33.75 60.00

59.94
720p/60 720 44.96
60.00
1080P/50 1080 56.26 50.00
1080P/50 1080 67.5 60.00
NOTES
This product does not support the display mode not listed above. In order to achieve
the best display effect, please select the above-listed 20 display modes input signal.
Because of the difference of display card output signal (especially non-standard signal
output), the display image may appear with a little disturbance which can be adjusted through
" AUTO CONFIG " in the "PICTURE" menu by users.
To prolong this unit's service life, you are suggested to use power management function
of computer.

Additional Information
Care and Maintenance Disposal
Handling Discs UK: Waste electrical products should

not be disposed of with household
• To remove a disc from its storage case, press waste. Separate disposal facilities
down on the centre of the case and lift the exist, for your nearest facilities see
disc out. www.recycle-more.co.uk
or in-store for details.
• Discs should be returned to their cases after
use. This avoids serious scratches that could
ROI: Produced after 13th August 2005
cause the laser pickup to skip.
Waste electrical products should not
• Hold the disc by the edges, to avoid be disposed of with household waste.
touching the recorded side of the disc. Please recycle where facilities exist.
Check with your Local Authority or
• Fingerprints and dust should be carefully retailer for recycling advice.
wiped from the disc’s surface with a soft
cloth.
• Never use chemicals such as record sprays, Warranty

antistatic sprays, benzene, or thinners
to clean the discs. These chemicals can
irreparably damage the disc’s surface. Your TESCO appliance is covered by a warranty
for 12 months from the date of purchase. If
• Audio discs and DVD discs have no grooves a fault develops during this period, please
to collect dust and microscopic debris so contact the TESCO electrical help line on
gently wiping with a soft cloth should 0845 456 6767. Please have your original
remove most particles. purchase receipt with you when you call. This
warranty in no way affects your consumer
• Wipe in a straight line from the inside to
rights.
the outside of the disc. Small dust particles
and light stains should have no effect on
reproduction quality.
• Do not expose discs to direct sunlight,

high humidity, or high temperatures
for extended periods. Exposure to high
temperatures can warp the disc.
• Do not stick paper or write anything with a

ball point pen on the label side of the disc.

User Guide LCD TECHNIKA LCD 24-621 - L2M16+DVD PDF

Uploaded by

Copyright:

Available Formats

User Guide LCD TECHNIKA LCD 24-621 - L2M16+DVD PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

User Guide LCD TECHNIKA LCD 24-621 - L2M16+DVD PDF

Uploaded by

Copyright:

Available Formats

User Guide

Introduction USB Operation

Connecting the TV Teletext Function

Connecting the TV antenna 10 Teletext Function 34

DVD Operation DVD Function Setup

Thank you for purchasing this Technika

You may already be familiar with using a • HD Ready 1080p LCD/DVD TV

HDMI (High Deﬁnition Multimedia Interface)

To ensure your safety and the safety of others,

Keep this information in a safe place for

23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide 5

Caution! Changes or modiﬁcations not

6 23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide

the user is encouraged to try to correct the

• Re-orient or relocate the receiving antenna.

• Increase the separation between the

• Connect the external device into an outlet

• Consult the dealer or an experienced radio/

The mains lead on this equipment may be

23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide 7

LOCAL KEYBOARD PANEL

1. Start of play or pause of play

COVER SIDE TO BACK

8 23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide

23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide 9

WARNING! ENSURE THE TV AND VGA cable

• To improve picture quality in a poor signal Component Input

10 23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide

23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide 11

The Common Interface (CI) slot is designed to

WARNING: SWITCH OFF YOUR TV

The CI slot is located on the side of your TV.

12 23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide

Suitable for wall mounting - VESA 100 x 100 mm

1. The base must first be removed. Place

Mounting the wall bracket - please refer

23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide 13

Normally, battery can be used for one year.

Please use SUM-4(AAA) battery.

Never use rechargeable battery.

Do not use a new and an old battery together.

If electrolyte splashes into the body, please clean it with water.

16 23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide

SELECTING SOURCE OPERATION

23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide 17

DTV SETTING DTV SETTING

PVR File System

Select Adjust SETUP Return

Auto Tuning item enables you to adjust channel setting automatically.

Channel Tuning DTV SETTING

Country selection Australia

Manual Tuning item enables you to change channel settings.

Please select channel then

Programme Edit item enables you to enter submenu. NO SIGNAL

Bad Normal Good

18 23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide

23.6" HD Ready 1080p LCD/DVD TV with USB Record User Guide 19

convenient for you. USB Disk

Speed: Shows read and write speed. Speed OK Cancel

0RQLWRUV&RPPXQLFDWLRQGHYLFHV$XGLR+XPDQ,QSXW'HYLFH+,'0DVV

86%0DVV6WRUDJH&ODVV&RQWURO%XON,QWHUUXSW&%,7UDQVSRUW