Scribd
Upload
156 views

Manual Partial Discharge PD Detector PD

The document describes a manual partial discharge PD detector. It has a wide measuring range and high precision. It is designed to have strong functions to attenuate interference from space and power supply. It is suitable for testing partial discharge in equipment like motors, transformers, cables and more.

Uploaded by

Alejandro Maturano
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
156 views

Manual Partial Discharge PD Detector PD

The document describes a manual partial discharge PD detector. It has a wide measuring range and high precision. It is designed to have strong functions to attenuate interference from space and power supply. It is suitable for testing partial discharge in equipment like motors, transformers, cables and more.

Uploaded by

Alejandro Maturano
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

WWW.HIMALAYAL.COM.

CN

Manual Partial Discharge PD Detector / PD Tester

HCL2010-M
Pioneer on Interference discriminate logic anti-interference mode

IEC60270, IEC60885-3

HCL2010-M manual partial discharge tester is special designed with wide measuring range and high

precision. The PD tester adopt balance method principle. The function of attenuation on space

interference and power supply interference is strength. Discharging repeat rate is digit measuring, the

accuracy is highly improved. Easy operating, convenient for wide User. It good selection for PD tester with

low budget.

Application:

The partial discharge tester suitable for motor, transformer, instrument transformer, cable, bushing,

T: 86 21-61016210 Himalayal, always by your side. Copy right © HIMALAYAL


[email protected] 1 All right reserved.
WWW.HIMALAYAL.COM.CN

capacitor and other high voltage products’ partial discharge measurement.

Applied Standard

• IEC60270 《Partial discharge measurement》

• IEC60885-3 《Test methods for partial discharge measurements on lengths of extruded power

cables》

• DL417 《Partial discharge testing guide for power equipment》

• GB/T16927 《High-voltage test technique》

• IEC60060-1&2

• IEC-885

• IEEE Std.4

Application Scope

Power Cable

Project HCL2010

Working environment Temperature: -10 ~ 45℃ Relative humidity: ≤ 95%

Measurement channel Singe channel

Inspection sensitivity 0.02pC (When capacitor is 50pF )

Pulse peak value surpass threshold value (threshold value can be

Interference discriminate logic customize), continuous four ( or above four ) test voltage cycle, “effective”

indicate lamp display.

Display methods Ellipsoid and straight line

Window width: 15 ~ 150, window turn range 0 ~ 170


Time window
The two time window is independent.

Frequency 50, 100, 200, 400Hz, each 30 is one grade, rotate 360 degree.
Ellipsoid scan time base (T.B.)
Absorb power <1VA.

T: 86 21-61016210 Himalayal, always by your side. Copy right © HIMALAYAL


[email protected] 2 All right reserved.
WWW.HIMALAYAL.COM.CN

Pulse peak value meter 31/2 digit LED display, error < 5% F.S

Test object capacitance range: 6pF ~ 250uF

Test voltage meter Measuring range:100kV (expandable) digit display, error <3% F.S

Measurement range 0.01pC ~ 1000nC (1nC = 1000pC)

3db low frequency F1, 10Hz, 20Hz, 40Hz selectable

Amplifier 3db high frequency Fh 80kHz, 200kHz, 300kHz selectable

Positive pulse and negative pulse response asymmetry <1db

Gain adjusting range >120db

Gains The gain between each grade is 20±1db.

Linearity(10-100% FS) 1%

Uncertainty of scale factor 3%

Scale change 0 ~ above than 120db

Power AC 220V Frequency 50Hz / 60Hz, Max. consumption power: 500vA

Test voltmeter 0~ 100kV (expandable)

Partial discharge level repeat


Range: 1x104pps, error < 5% F.S
rate

z The convenient PD setting device, enable reading the partial discharge value directly
on the interface
z Pulse peak value meter sampling and digital voltmeter matching well with each other,
high accuracy on measuring.
z The discharge quantity can be record (Repeat rate n), matching up with other
component, can get the relationship between q—n,n—ψ,q—ψ. ( q – discharge level,
ψ phase angle )
z Digital display, different parameters are visible.
z Small volume, light weight, suitable for testing in power institute or workshop or high
voltage research.
z High sensitivity

T: 86 21-61016210 Himalayal, always by your side. Copy right © HIMALAYAL


[email protected] 3 All right reserved.
WWW.HIMALAYAL.COM.CN

z Pioneer on Interference discriminate logic device.


z Equip particular anti-interference mode, the device can attenuation the interference
greatly.
z High strength on anti-impulse.

Other parameter:

Dimension: 500x490x200 mm (W x L x H)
Weight: 15kg

Shanghai Himalayal Co.,Ltd Himalayal Corporation Limited


Office: 808-809, 1088A, New Jinqiao Road Headoffice: 23F Citybank Group Building,
, Shanghai, 201206, China Huayuanshiqiao Road,
Tel: 0086-21-6101 6212 Shanghai, 200120, China
6101 6210 Tel: 0086-21-38810278
Fax: 0086-21-6101 6213 Mail:[email protected]
Mail: [email protected] Website: http://www.himalayal.com
Website: http://www.himalayal.com.cn

T: 86 21-61016210 Himalayal, always by your side. Copy right © HIMALAYAL


[email protected] 4 All right reserved.

You might also like