Scribd
Upload
321 views1 page

How To Update The Firmware On Your MOTU Hardware

This document provides instructions for updating the firmware on different MOTU hardware devices, including the 828x, Audio Express, UltraLite-mk4, 828mk3 Hybrid, and UltraLite. The steps generally involve turning off the device, putting it into firmware update mode by pressing and holding specific buttons while powering on, then using the firmware updater program to complete the installation.

Uploaded by

jimmyd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
321 views1 page

How To Update The Firmware On Your MOTU Hardware

This document provides instructions for updating the firmware on different MOTU hardware devices, including the 828x, Audio Express, UltraLite-mk4, 828mk3 Hybrid, and UltraLite. The steps generally involve turning off the device, putting it into firmware update mode by pressing and holding specific buttons while powering on, then using the firmware updater program to complete the installation.

Uploaded by

jimmyd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

5/23/2018 MOTU.

com - How to update the firmware on your MOTU hardware


5. Release the volume knob when the letter B appears on the top panel LED's.
6. Open the firmware updater program and follow the on-screen instructions to install the update.

Audio Ex press

1. Turn off the Audio Express.


2. Disconnect the FireWire cable from back panel if it is connected.
3. Connect the Audio Express to the computer via USB.
4. Press and hold the Mic 1 knob on the front panel, and turn on the Audio Express.
5. Release the Mic 1 knob when the word UP appears on the front panel LED's.
6. Open the firmware updater program and follow the on-screen instructions to install the update.

UltraLite-m k4

(updating with internet connection)

1. Launch the MOTU Pro Audio Control web app on your computer, as usual.
2. Go to the Device tab.
3. In the New Update Available banner, click More Info.
4. After reviewing the list of enhancements, click OK to start the update.
5. Follow the on-screen instructions.

(updating without internet connection)

1. Download the latest firmware file from Firmware Change Log.


2. Transfer the file to the computer connected to the UltraLite-mk4.
3. Launch the MOTU Pro Audio Control web app on the computer, as usual.
4. Go to the Device tab.
5. Scroll down to the bottom and click Update from File.
6. Locate the file on your hard drive and click OK to start the update.
7. Follow the on-screen instructions.

828x , 828m k3 Hy brid, 896m k3 Hy brid, UltraLite m k3 Hy brid

1. Turn off the device.


2. Disconnect the FireWire (or ThunderBolt) cable from back panel if it is connected.
3. Connect the device to the computer via USB.
4. Press and hold the Page knob on the front panel and turn on the device.
5. Release the Page knob when the bootloader version number appears on the LCD.
6. Open the firmware updater program and follow the on-screen instructions to install the update.

828m k3, 896m k3, T rav eler m k3, UltraLite m k3

1. Turn off the device.


2. Connect the device to the computer via FireWire.
3. Press and hold the Page knob on the front panel and turn on the device.
4. Release the Page knob when the bootloader version number appears on the LCD.
5. Open the firmware updater program and follow the on-screen instructions to install the update.

8pre FireWire

1. Connect the 8pre to the computer and turn it on.


2. Open the firmware updater program and follow the on-screen instructions to install the update.

UltraLite

1. Turn off the UltraLite.


2. Connect the UltraLite to the computer via FireWire.
3. Press and hold the Page knob and the Cursor knob on the front panel, and turn on the device.
4. Release the Page and Cursor knobs when the words Firmware Upgrade appear on the LCD.
5. Open the firmware updater program and follow the on-screen instructions to install the update.

http://www.motu.com/techsupport/technotes/firmware/#x/H 2/3

You might also like