12
10
6 Design of base plate :
0
Consolidated Construction Consortium Limited
PROJECT Document No. Date Prepared Date
TITLE Revison No. Date Checked Date
CL.NO. DESIGN CALCULATION REFERENCES
1 Design of base plate(Base fixed)
Material Property
Grade of pedestal concrete = M20
Grade of Anchor Bolts = fe415
Yield Strength of anchor bolt fyb = 250 Mpa
Ultimate strength of Anchor Bolts fub = 410 Mpa
Youngs Modulus of steel = 200000 N/mm2
Yield Strength of base plate fy = 250 N/mm2
Ultimate strength of Base Plate fu = 490 N/mm2
Partial Safty factor for bolt γmb = 1.25
Partial safty factor for Material γm0 = 1.10
partial Safety Factor for Welds γmw = 1.25
s
Design Forces On Base Plate :
Axial Force Shear - Y Shear - Z Moment Mz
L/C Node
kN kN kN kNm
59 10 100 324
2.00 Base Plate Dimension :
Length of base plate L = 600 mm
Width of Base Plate B = 250 mm
Thickness Of Base plate tp = 20 mm
Depth of I section = 424 mm
Width of Section = 200 mm
Thickness of column flange plate = 12 mm
Thickness of column Web Plate = 4 mm
Length From tension bolt to column Center a = 260 mm
Distance From Bolt Centre to column flange = 48 mm
Total No.of Bolts in tension side = 5 Nos
Total number of bolts provided = 10 Nos
Calculation of Bolt Forces
N = C-T
Permissible bearing Stress pmax = 0.45 fck
= 9 N / mm2
C = 0.45 fck y B
Therefore, N = 0.45 fck y B - T
M = Cb + Ta
= 0.45fck y B (L/2 - y/2) +Ta
Solving above equation,
y = L/2 + a - {(L/2 + a )2 - [2(M+Na) / ( 0.45fckB)]}0.5
= 600/2+260-{(600/ 2 +260)^2
-[2 (324x10^6 + 59x10^3)/(0.45x20x250)]}^0.5
y = 450.62 mm
Consolidated Construction Consortium Limited
PROJECT Document No. Date Prepared Date
TITLE Revison No. Date Checked Date
CL.NO. DESIGN CALCULATION REFERENCES
Therfore, C = 9x450.618x250
C = 1013.9 kN
Tension in Anchor Bolts T = (1013.891)-(59)
T = 954.89 kN
Resultant shear force V = 100.5 kN
Check for Anchor Bolts :
Dia of bolt provided = 30 mm
Gross c/s area of bolt (Shank area) Asb = 707 mm2
Net area c/s area of bolt An = 561 mm2
Tensile Strength of bolt
Tbd = 0.9 x fub x An x / γmb < fyb x Asb / γm0 Cl 10.3.5 IS 800 :2007
= 0.9 x 410x561/1.25
< 250x707/1.1
Tbd = 160.682 kN
Shear strength of bolts Vdb = fu x ( nn Anb + ns Asb) / √3 x γmb Cl 10.3.3 IS 800 :2007
No.of shear planes with threads intercepting
nn = 1
the shear plane
`
No.of shear planes without threads intercepting
ns = 0
the shear plane
Shear strength of bolts Vdb = 132.796 kN
Tension forces in each bolt Tb = 190.978 kN > 160.682 kN
Not Safe
Shear Force In Each bolt Vsb = 10.0499 kN < 132.796
Hence Ok
Combined Shear and Tension = (Vsb/Vbd)2 + ( Tb / Tbd )2 ≤ 1
Cl 10.3.6, IS800:2007
= 1.41837 > 1.0
Not Safe
Check For Anchorage Length :
Length of Embedment for anchor bolt = 1000 mm IS456 cl 26.2.1.1
Maximum tensile force in bolt = 190.978 kN
Design Bond strength of concrete in Tension Ʈbd = 1.5 N/mm2
Anchorage Length Required = 1351.58 mm > 1000
Not Safe
Check For Thickness Of plate :
Bending Moment In Base Plate = 5x190.979x48x1000
= 45.8347 kNm
= 1.2 Ze fy / γmo
= 4.54545 kNm m
Not Safe
Design Of weld Between Column And Base Plate :
Flange To End Plate Weld
For full strength weld, af ≥ tf / 1.4
For part 1 = 8.571 mm
web To End Plate Weld
For full strength weld, aw ≥ tf / 1.4
For part 1 = 2.857 mm
