SELF ASSESSMENT REPORT (SAR) FORMAT

UNDERGRADUATE ENGINEERING PROGRAMS (TIER-II)

FIRST TIME ACCREDITATION

(Applicable for all the programs, except those granted full accreditation for 5 years as per Jan 2013 Manual)

NBCC Place, 4th Floor East Tower, Bhisham Pitamah Marg,

Pragati Vihar New Delhi 110003
P: +91(11)24360620-22, 24360654
Fax: +91(11) 24360682
E-mail: [email protected]
Website: www.nbaind.org
(June, 2015)

1
 SAR Contents

Serial Code & Link

Item Page No.
to the Item

PART A Institutional Information 3

PART B Criteria Summary 7

Program Level Criteria

1 Vision, Mission and Program Educational Objectives 8

2 Program Curriculum and Teaching – Learning Processes 9

3 Course Outcomes and Program Outcomes 11

4 Students’ Performance 17

5 Faculty Information and Contributions 24

6 Facilities and Technical Support 30

7 Continuous Improvement 31

Institute Level Criteria

8 First Year Academics 35

9 Student Support Systems 39

10 Governance, Institutional Support and Financial Resources 40

PART C Declaration by the Institution 45

Program Outcomes(POs) & Program Specific

Annexure-I 46
Outcomes(PSOs)

2
 PART A: Institutional Information

1. Name and Address of the Institution:

2. Name and Address of the Affiliating University:

3. Year of establishment of the Institution:

4. Type of the Institution:

University
Deemed University
Government Aided
Autonomous
Affiliated

5. Ownership Status:

Central Government

State Government

Government Aided

Self - Financing

Trust

Society

Section 25 Company

Any Other (Please specify)

Provide Details:

6. Other Academic Institutions of the Trust/Society/Company etc., if any:

Year of
Name of the Institution(s) Programs of Study Location
Establishment

Table A.6 Note: Add rows as needed.

3
7. Details of all the programs being offered by the institution under consideration:

Name of Increase
Year
S. Program the in Year of AICTE Accreditation
of Intake
No. Name Department intake, increase Approval Status*
Start
if any

Table A.7
* Write applicable one:
 Applying first time
 Granted provisional accreditation for two /three years for the period(specify period)
 Granted accreditation for 5 /6 years for the period (specify period)
 Not accredited (specify visit dates, year)
 Withdrawn (specify visit dates, year)
 Not eligible for accreditation
 Eligible but not applied

Note: Add rows as needed.

8. Programs to be considered for Accreditation vide this application:

S. No. Program Name

1.

N.
Table A.8
9. Total number of employees in the institution:

A. Regular Employees (Faculty and Staff):

CAY CAYm1 CAYm2

Items
Min Max Min Max Min Max

M
Faculty in Engineering
F

M
Faculty in Maths, Science &
Humanities F

M
Non-teaching staff
F

Table A.9a
Note: Minimum 75% should be Regular faculty and the remaining shall be Contractual Faculty as per
AICTE norms and standards.

4
 The contractual faculty (doing away with the terminology of visiting/adjunct faculty,
whatsoever) who have taught for 2 consecutive semesters in the corresponding academic year on
full time basis shall be considered for the purpose of calculation in the Student Faculty Ratio

CAY – Current Academic Year

CAYm1- Current Academic Year minus1 = Current Assessment Year
CAYm2 - Current Academic Year minus2=Current Assessment Year minus 1

B. Contractual Staff Employees (Faculty and Staff): (Not covered in Table A):

CAY CAYm1 CAYm2

Items
Min Max Min Max Min Max

M
Faculty in Engineering
F

M
Faculty in Maths, Science &
Humanities F

M
Non-teaching staff
F

Table A.9b

10. Total number of Engineering Students:

Item CAY CAYm1 CAYm2

Total no. of boys

Total no. of girls

Total no. of students

Table A.10

(Instruction: The data may be categorized in tabular form separately for undergraduate, postgraduate
engineering, other program, if applicable)

Note: In case the Institution is running AICTE approved additional courses such as MBA, MCA in the
first shift, engineering courses in the second shift, Polytechnic in Second shift etc., separate
tables with the relevant heading shall be prepared.

5
11. Vision of the Institution:

12. Mission of the Institution:

13. Contact Information of the Head of the Institution and NBA coordinator, if designated:

i. Name:

Designation:

Mobile No:

Email id:

ii. NBA coordinator, if designated:

Name:

Designation:

Mobile No:

Email id:

6
 PART B: Criteria Summary

Name of the program:

Criteria
Criteria Mark/Weightage
No.

Program Level Criteria

1. Vision, Mission and Program Educational Objectives 60

2. Program Curriculum and Teaching – Learning Processes 120

3. Course Outcomes and Program Outcomes 120

4. Students’ Performance 150

5. Faculty Information and Contributions 200

6. Facilities and Technical Support 80

7. Continuous Improvement 50

Institute Level Criteria

8. First Year Academics 50

9. Student Support Systems 50

10. Governance, Institutional Support and Financial Resources 120

Total 1000

7
 CRITERION 1 Vision, Mission and Program Educational Objectives 60

1. VISION, MISSION AND PROGRAM EDUCATIONAL OBJECTIVES (60)

1.1. State the Vision and Mission of the Department and Institute (5)
(Vision statement typically indicates aspirations and Mission statement states the broad approach
to achieve aspirations)

(Here Institute Vision and Mission statements have been asked to ensure consistency with the
department Vision and Mission statements; the assessment of the Institute Vision and Mission will
be taken up in Criterion 10)

1.2. State the Program Educational Objectives (PEOs) (5)

(State the PEOs (3 to 5) of program seeking accreditation)

1.3. Indicate where the Vision, Mission and PEOs are published and disseminated among
stakeholders (10)

(Describe where (websites, curricula, posters etc.) the Vision, Mission and PEOs are published
and detail the process which ensures awareness among internal and external stakeholders with
effective process implementation)

(Internal stakeholders may include Management, Governing Board Members, faculty, support
staff, students etc. and external stakeholders may include employers, industry, alumni, funding
agencies, etc.)

1.4. State the process for defining the Vision and Mission of the Department, and PEOs of the
program (25)
(Articulate the process for defining the Vision and Mission of the department and PEOs of the
program)

1.5. Establish consistency of PEOs with Mission of the Department (15)

(Generate a “Mission of the Department – PEOs matrix” with justification and rationale
of the mapping)

PEO Statements M1 M2 …. Mn

PEO1:

PEO2:

PEO5:

Table B.1.5

Note: M1, M2,... Mn are distinct elements of Mission statement. Enter correlation levels 1, 2 or 3
as defined below:

1: Slight (Low) 2: Moderate (Medium) 3: Substantial (High)

It there is no correlation, put “-”

Note: In this document wherever the term ‘Process’ has been used its meaning is process formulation,
notification and implementation.

8
 CRITERION 2 Program Curriculum and Teaching – Learning Processes 120

2. PROGRAM CURRICULUM AND TEACHING - LEARNING PROCESSES (120)

2.1. Program Curriculum (20)

Government Engineering College, Bhavnagar is affiliated to the Gujarat Technological
University; hence Mechanical Engineering course has to follow the University curriculum
in compliance with AICTE. The extent of compliance of University curriculum with the POs
& PSOs is identified and the process adapted to find out the curricular gaps is as
mentioned below:

The Curriculum is divided broadly into seven Categories as listed below.

1. Humanities and social sciences (HS)
2. Mandatory courses (MC)
3. Basic sciences (BS)
4. Engineering Sciences (ES)
5. Professional Subjects – core (PC)
6. Professional Subjects – Elective (PE)
7. Open Subjects – Electives (OE)
8. Project Work (EEC – Employability Enhancement Course)

S.
Course
No Course Title Sem. Credits POs
Code
.
Humanities and Social sciences (HS)
1. 3110003 English 1 3
2. 3110011 Physics 1 4
3. 3130004 Effective Technical Communication 3 3
4. 3141909 Organisational Behaviour 4 3
5.
Total Credits
Mandatory Courses (MC)
6. 3110007 Environmental Sciences 1 0
7. 3110017 Induction Programme 3 0
8. 3130007 Indian Constitution 3 0
9.
10. Total Credits
Basic sciences (BS)
11. 3110014 Mathematics -I 1 5
12. 3110015 Mathematics - II 1 5
Complex Variables and Partial 3
13. 3130005 5
Differential Equations
14. 3141901 Mechanical Measurement and Metrology 4 5
15.
16.
17.
18.
Total Credits

9
S.
Course
No Course Title Sem. Credits POs
Code
.
Engineering Sciences (ES)
19. 3110003 Programming for Problem Solving 1 4
20. 3110004 Basic Civil Engineering 1 4
21. 3110005 Basic Electrical Engineering 1 4
22. 3110006 Basic Mechanical Engineering 1 4
23. 3110012 Workshop/ Manufacturing Practices 1 2
24. 3110013 Engineering Graphics & Design 1 4
25. 3131904 Material Science and metallurgy 3 4
26.
27.
28.
29.
Total Credits
Professional Subjects – core (PC)
30. 3131905 Engineering Thermodynamics 3 5
31. 3131906 Kinematics and Theory of Machines 3 5
32. 3141906 Fluid Mechanics and Hydraulic Machines 4 5
33. 3141907 Fundamentals of Machine Design 4 5
34. 3141908 Manufacturing Processes 4 4
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
Total Credits
Professional Subjects – Elective (PE)
56.
57.
58.
59.
Total Credits
Open Subjects – Electives (OE)
60.

10
 S.
Course
No Course Title Sem. Credits POs
Code
.
61.
Total Credits
Project Work (EEC – Employability Enhancement Course)
62. 3130008 Design Engineering - IA 3 1
63. 3140005 Design Engineering - IB 3 1
64.
65.
66.
67.
Total Credits

Table B.2.1a

2.1.1. State the process used to identify extent of compliance of the University
curriculum for attaining the Program Outcomes and Program Specific Outcomes
as mentioned in Annexure I. Also mention the identified curricular gaps, if any
(10)

(State the process details; also mention identified curricular gaps).

Note: In case all POs are being demonstrably met through University Curriculum then
2.1.2 will not be applicable and the weightage of 2.1.1 will be 20.
Following is the process used to identify extent of compliance of curriculum for
attaining the POs and PSOs.
• Identify Course Outcomes for each subject
• Map each Course Outcome with POs and PSOs
• Based on All CO-POs/PSOs mapping, Map subject with POs and PSOs
• Categorize entire Curriculum into Core Courses, Science & Humanities,
• Programming, Inter Disciplinary, Projects / Lab Practices
• Map each category with POs and PSOs

Mapping of the each subject has to be pasted here

2.1.2. State the delivery details of the content beyond the syllabus for the attainment of
POs and PSOs (10)

(Provide details of the additional course/learning material/content/laboratory

experiments/projects etc., arising from the gaps identified in 2.1.1 in a tabular form in
the format given below)

CAYm1

S.No. Gap Action Date- Resource Person % of Relevance to

taken Month-Year with designation students POs, PSOs

Table B.2.1.2a
11
 CAYm2

S.No. Gap Action Date- Resource Person % of Relevance to

taken Month-Year with designation students POs, PSOs

Table B.2.1.2b

CAYm3

S.No. Gap Action Date- Resource Person % of Relevance to

taken Month-Year with designation students POs, PSOs

Table B.2.1.2c

Note: Please mention in detail whether the Institution has given such inputs and
suggestions to the Affiliating University regarding curricular gaps and possible
addition of new content/add-on courses in the curriculum, to bridge the gap and to
better attain program outcome(s).

2.2. Teaching - Learning Processes (100)

2.2.1. Describe Processes followed to improve quality of Teaching & Learning (25)

(Processes may include adherence to academic calendar and improving instruction methods
using pedagogical initiatives such as real world examples, collaborative learning, quality of
laboratory experience with regard to conducting experiments, recording observations,
analysis of data etc. encouraging bright students, assisting weak students etc. The
implementation details and impact analysis need to be documented)
(Implementation details and impact analysis need to be documented)

1. Preparation of Academic Time-Table:

• Academic Time-Table is prepared for every semester before reopen of the
classes, and displayed on the notice board as well as provided to the students in
the registration kit. It also consists of the activities planned for the 1st semester
students which include registration date, commencement of the classes.

2. Instruction methods and Pedagogical initiatives:

 Class time table and lab manuals for all the subjects are prepared by respective
faculty and circulated to the students. Students are provided with syllabus, schemes
and text/reference book details.
• Additional lectures like NPTEL are arranged for students on Saturdays.
• The faculty are oriented towards Outcome based Education (OBE) and are actively

12
 utilizing the OBE to cater the learning needs of students by innovative way.
• The faculty of department adopts various innovative Teaching & Learning
methodologies to create the best learning environment for student. These
methodologies include traditional black board teaching, power point presentations,
video lecturing and demonstration of models and charts.
• Students are initiated and motivated for group activities such as group discussion,
seminars and small presentation on any topic related to the course, quiz etc.
Individual improvement is also emphasized and assessed.
• Videos are shown to improve the teaching learning process.
• All the faculties are bound to maintain Attendance registers, course files, Work
dairies.
• Industrial visits are conducted at least once a year to reduce the gap between
industry and institute.
• Workshops are organized to help the students to understand concepts beyond
curriculum.
• One-one discussion, interaction between Professors and students and continuous
monitoring has increased confidence levels of the students.

3. Collaborative learning:
• Conduction of events like organizing guest lectures, conferences, industrial visits,
students’ participation in intercollege competitions, and technical events arranged in
campus etc. for the semester are planned and the coordinators are allotted for all the
events during the department meeting prior to events for effective conduction of the
activities throughout.
• Regular conduction of Industrial expert talk from industrial person, government
organizations helps the students to update the industrial need and industrial
requirements.
• A separate central communication lab has been established to provide/improvement
of communication skills of the students.
• Additionally, the Centre of Excellence has been developed at the institute in
collaboration with the Siemens Pvt. Ltd. To provide the edge knowledge of industrial
softwares, hand on experience on training kit and some advanced machine tools like
CNCs and other trainer kits for machines tools and controllers.
 Based on the programme results and on-going research areas and current trends in
Mechanical engineering industries, the improvements in courses and curriculum are
identified and applied as and when needed. In the curriculum, new electives have
been introduced for the different areas in Mechanical engineering.

4. Quality of laboratory experiments:

• As per the guidelines 10-12 experiments are conducted in almost all courses as per
the GTU guidelines in the syllabus.
• Laboratory manuals are prepared by students with the details of the experiment,
designing issues with the help of course teacher so that the students can develop the

13
 habit of writing and self-understanding.
• Well-equipped lab and updation of practicals as per the latest technologies helps the
students to update themselves. Students are permitted/ encouraged to repeat the
experiments/ programming practice to become skilled to enhance their ability to
prepare the protocols for a particular experiment (not for all labs).
• Centre of Excellence developed in the institutes are used for conducting and
demonstrating the experiments which improves the student interest in research.
Higher version equipment with latest standard software helps to learn the students to
analyse the data as per the industrial standards.

5. To support weak students and encourage bright students (Student

encouragement) :
• Identification of bright and weak students is made as per the performance of the
student during his mid semester and end semester examinations. The weak students
are motivated to attend remedial classes and help them to better understand the
subject.
• Bright students are encouraged to take up mini projects and case studies etc. to
enhance their technical skil.
• Support is also provided for the students to take up final year project in the
industry/IITs.

2.2.2. Quality of internal semester Question papers, Assignments and Evaluation (20)

(Mention the initiatives, implementation details and analysis of learning levels

related to quality of semester question papers, assignments and evaluation)

2.2.3. Quality of student projects (25)

(Quality of the project is measured in terms of consideration to factors including, but not
limited to, environment, safety, ethics, cost, type (application, product, research, review
etc.) and standards. Processes related to project identification, allotment, continuous
monitoring, evaluation including demonstration of working prototypes and enhancing the
relevance of projects. Mention Implementation details including details of POs and PSOs
addressed through the projects with justification)

14
 Evaluation Criteria grades*
Sr.
En. No. Project Title PSOs POs Application Innovation Research Safety Cost
No.
(4) (4) (4) (4) (5)

* Each evaluation criteria carries 4 marks.

Table B.2.2.3
2.2.4. Initiatives related to industry interaction (15)

(Give details of the industry involvement in the program such as industry-attached

laboratories, partial delivery of appropriate courses by industry experts etc. Mention
the initiatives, implementation details and impact analysis)

List of Industrial Visits for Mechanical Engineering Students

Sr. No. Name of the Organizations Date Of No. of students
Visit participated

2.2.5. Initiatives related to industry internship/summer training (15)

(Mention the initiatives, implementation details and impact analysis)

 Training & Placement Cell/Course related faculties identifies the organizations,

suitable for Mechanical Engineering students and approach them to allow our
students for internship/ summer training.
 Faculty members also arrange internships (through their personal contacts) for the
students, in suitable organizations.
 The faculties and students also interacts with alumni those who are working in the
industries and request them to provide necessary guidelines and supports for their
internship.
 Some of the organizations where students are going for the internships/ summer
training for CAY 2019 -20 are appended below:

Sr. Name of the Students Certification/ Organization Duration Date

No. Training Name
Details

16
 CRITERION 3 Course Outcomes and Program Outcomes 120

3. COURSE OUTCOMES AND PROGRAM OUTCOMES (120)

3.1. Establish the correlation between the courses and the Program Outcomes (POs) and
Program Specific Outcomes (PSOs) (20)

(Program Outcomes as mentioned in Annexure I and Program Specific Outcomes as defined by the
Program)

3.1.1. Course Outcomes (COs) (SAR should include course outcomes of one course from
each semester of study, however, should be prepared for all courses and made
available as evidence, if asked) (05)

Note: Number of Outcomes for a Course is expected to be around 6.

Course Name: Ciii Year of Study: YYYY – YY; for ex. C202 Year of study 2013-14

C202.1 <Statement>

C202.2 <Statement>

C202.3 <Statement>

… <Statement>

C202.N <Statement>

Table B.3.1.1

C202 is the second course in second year and ‘.1’ to ‘.6’ are the outcomes of this course.

3.1.2. CO-PO matrices of courses selected in 3.1.1 (six matrices to be mentioned; one
per semester from 3rd to 8th semester) (05)

CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

C202.1

C202.2

C202.3

C202.N

C202

Table B.2.1.2

17
 Note:

1. Enter correlation levels 1, 2 or 3 as defined below:

1: Slight (Low) 2: Moderate (Medium) 3: Substantial (High)

It there is no correlation, put “-”

2. Similar table is to be prepared for PSOs

3.1.3. Program level Course-PO matrix of all courses INCLUDING first year courses (10)

Course PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

C101

C202

C303

….

….

C4…

Table B.3.1.3

Note:

1. Enter correlation levels 1, 2 or 3 as defined below:

1: Slight (Low) 2: Moderate (Medium) 3: Substantial (High)

It there is no correlation, put “-”

 It may be noted that contents of Table 3.1.2 must be consistent with information
available in Table 3.1.3 for all the courses.

2. Similar table is to be prepared for PSOs

3.2. Attainment of Course Outcomes (50)

3.2.1. Describe the assessment processes used to gather the data upon which the
evaluation of Course Outcome is based (10)

(Examples of data collection processes may include, but are not limited to, specific
exam/tutorial questions, assignments, laboratory tests, project evaluation, student
portfolios (A portfolio is a collection of artifacts that demonstrate skills, personal
characteristics and accomplishments created by the student during study period), internally
developed assessment exams, project presentations, oral exams etc.)

18
3.2.2. Record the attainment of Course Outcomes of all courses with respect to set
attainment levels (40)

Program shall have set Course Outcome attainment levels for all courses.

(The attainment levels shall be set considering average performance levels in the university
examination or any higher value set as target for the assessment years. Attainment level
is to be measured in terms of student performance in internal assessments with respect to
the Course Outcomes of a course in addition to the performance in the University
examination)

Measuring Course Outcomes attained through University Examinations

Target may be stated in terms of percentage of students getting more than the university
average marks or more as selected by the Program in the final examination. For cases
where the university does not provide useful indicators like average or median marks etc.,
the program may choose an attainment level on its own with justification.

Example related to attainment levels Vs. targets: (The examples indicated are for
reference only. Program may appropriately define levels)

Attainment Level 1: 60% students scoring more than University average percentage
marks or set attainment level in the final examination.

Attainment Level 2: 70% students scoring more than University average percentage
marks or set attainment level in the final examination.

Attainment Level 3: 80% students scoring more than University average percentage
marks or set attainment level in the final examination.

 Attainment is measured in terms of actual percentage of students getting set

percentage of marks.

 If targets are achieved then all the course outcomes are attained for that year.
Program is expected to set higher targets for the following years as a part of
continuous improvement.

 If targets are not achieved the program should put in place an action plan to attain
the target in subsequent years.

Measuring CO attainment through Internal Assessments: (The examples

indicated are for reference only. Program may appropriately define levels)

Target may be stated in terms of percentage of students getting more than class average
marks or set by the program in each of the associated COs in the assessment instruments
(midterm tests, assignments, mini projects, reports and presentations etc. as mapped with
the COs)

Example

Mid-term test 1 addresses C202.1 and C202.2. Out of the maximum 20 marks for this test
12 marks are associated with C202.1 and 8 marks are associated with C202.2.

19
 Examples related to attainment levels Vs. targets:

Attainment Level 1: 60% students scoring more than 60% marks out of the relevant
maximum marks.

Attainment Level 2: 70% students scoring more than 60% marks out of the relevant
maximum marks.

Attainment Level 3: 80% students scoring more than 60% marks out of the relevant
maximum marks.

 Attainment is measured in terms of actual percentage of students getting set

percentage of marks.

 If targets are achieved then the C202.1 and C202.2 are attained for that year.
Program is expected to set higher targets for the following years as a part of
continuous improvement.

 If targets are not achieved the program should put in place an action plan to attain
the target in subsequent years.

Similar targets and achievement are to be stated for the other midterm tests/internal
assessment instruments

Course Outcome Attainment:

For example:

Attainment through University Examination: Substantial i.e. 3

Attainment through Internal Assessment: Moderate i.e. 2

Assuming 80% weightage to University examination and 20% weightage to Internal

assessment, the attainment calculations will be (80% of University level) + (20% of
Internal level ) i.e. 80% of 3 + 20% of 2 = 2.4 + 0.4 = 2.8

Note: Weightage of 80% to University exams is only an example. Programs may decide
weightages appropriately for University exams and internal assessment with due
justification.

3.3. Attainment of Program Outcomes and Program Specific Outcomes (50)

3.3.1. Describe assessment tools and processes used for measuring the attainment of
each of the Program Outcomes and Program Specific Outcomes (10)

(Describe the assessment tools and processes used to gather the data upon which the
evaluation of each of the Program Outcomes and Program Specific Outcomes is based
indicating the frequency with which these processes are carried out. Describe the
assessment processes that demonstrate the degree to which the Program Outcomes and
Program Specific Outcomes are attained and document the attainment levels)

20
 3.3.2. Provide results of evaluation of each PO & PSO (40)

Program shall set Program Outcome attainment levels for all POs & PSOs.

(The attainment levels by direct (student performance) and indirect (surveys) are to be
presented through Program level Course – PO & PSO matrix as indicated).

PO Attainment

Course PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

C101

C102

….

….

C409

Direct
Attainment

Indirect
Attainment

Table B.3.3.2

Note: Similar table is to be prepared for PSOs

C101, C102 are indicative courses in the first year. Similarly, C409 is final year course.
First numeric digit indicates year of study and remaining two digits indicate course nos. in
the respective year of study.

 Direct attainment level of a PO & PSO is determined by taking average across all courses
addressing that PO and/or PSO. Fractional numbers may be used for example 1.55.

 Indirect attainment level of PO & PSO is determined based on the student exit surveys,
employer surveys, co-curricular activities, extracurricular activities etc.

Example:

1. It is assumed that a particular PO has been mapped to four courses C2O1, C3O2, C3O3
and C4O1

21
2. The attainment level for each of the four courses will be as per the examples shown in
3.2.2

3. PO attainment level will be based on attainment levels of direct assessment and indirect
assessment

4. For affiliated, non-autonomous colleges, it is assumed that while deciding on overall

attainment level 80% weightage may be given to direct assessment and 20% weightage
to indirect assessment through surveys from students(largely), employers (to some
extent). Program may have different weightages with appropriate justification.

5. Assuming following actual attainment levels:

Direct Assessment

C201 –High (3)

C302 – Medium (2)

C303 – Low (1)

C401 – High (3)

Attainment level will be summation of levels divided by no. of courses 3+2+1+3/4=

9/4=2.25

Indirect Assessment

Surveys, Analysis, customized to an average value as per levels 1, 2 & 3.

Assumed level - 2

6. PO Attainment level will be 80% of direct assessment + 20% of indirect assessment i.e.
1.8 + 0.4 = 2.2.

Note: Similarly for PSOs

22
 CRITERION 4 Students’ Performance 150

4. STUDENTS’ PERFORMANCE (150)

Item
(Information to be provided cumulatively for all the shifts with CAY CAYm1 CAYm2
explicit headings, wherever applicable)

Sanctioned intake of the program (N)

Total number of students admitted in first year minus number of

students migrated to other programs/institutions plus no. of students
migrated to this program (N1)

Number of students admitted in 2nd year in the same batch via lateral
entry (N2)

Separate division students, if applicable (N3)

Total number of students admitted in the Program (N1 + N2 + N3)

Table B.4a
CAY – Current Academic Year
CAYm1- Current Academic Year minus1= Current Assessment Year
CAYm2 - Current Academic Year minus2=Current Assessment Year minus 1
LYG – Last Year Graduate minus 1
LYGm1 – Last Year Graduate minus 1
LYGm2 – Last Year Graduate minus 2

23
 Year of entry N1 + N2 + N3 Number of students who have
(As defined above) successfully graduated without
backlogs in any semester/year of
study
(Without Backlog means no compartment
or failures in any semester/year of study)
I Year II Year III Year IV Year

CAY

CAYm1

CAYm2

CAYm3

CAYm4 (LYG)

CAYm5 (LYGm1)

CAYm6 (LYGm2)
Table B.4b

Number of students who have successfully

N1 + N2 + N3 graduated in stipulated period of study)
Year of entry [Total of with Backlog + without Backlog]
(As defined above)
I Year II Year III Year IV Year
CAY

CAYm1

CAYm2

CAYm3

CAYm4 (LYG)

CAYm5 (LYGm1)

CAYm6 (LYGm2)

Table B.4c

24
For Example from data entry perspective:
Item
CAY CAYm1 CAYm2
(Information to be provided cumulatively for all the
(2016-17) (2015-16) (2014-15)
shifts with explicit headings, wherever applicable)
Sanctioned intake of the program (N)
120 120 120
Total number of students admitted in first year minus
number of students migrated to other programs/institutions 100 100 110
plus no. of students migrated to this program (N1)

Number of students admitted in 2nd year in the same batch

Nil 24 24
via lateral entry (N2)

Separate division (N3) Nil Nil Nil

Total number of students admitted in the Program (N1 + N2

124 124 134
+ N3)

Number of students who have

N1 + N2 + N3 successfully graduated without
Year of entry backlogs in any semester/year of
study
(As defined above)

I Year II Year III Year IV Year

CAY (2016-17) 100 (100+0+0)

CAY (2015-16) 124(100+24+0) 60

CAYm1 (2014-15) 124 (100+24+0) 50 40+20

CAYm2 (2013-14) 134 (110+24+0) 90 80+20 70+20

CAYm3 (LYG) (2012-13) 124 (100+24+0) 100 90+20 85+18 85+15

CAYm4 (LYGm1) (2011-12) 130 (120+10+0) 80 70+10 60+10 50+10

CAYm5 (LYGm2) (2010-11) 144 (120+24+0) 70 60+15 54+10 50+10

Number of students who have

successfully graduated in stipulated
period of study)
N1 + N2 + N3
Year of entry [Total of with Backlog + without
(As defined above)
Backlog]

I Year II Year III Year IV Year

CAY (2016-17) 124 (100+0+0)

CAY (2015-16) 124 (100+24+0) 40

CAYm1 (2014-15) 124 (100+24+0) 50 45+4

CAYm2 (2013-14) 134 (110+24+0) 20 20+4 15+3

25
 CAYm3 (LYG) (2012-13) 124 (100+24+0) 0 0+4 5+4 5+4

CAYm4 (LYGm1) (2011-12) 130 (120+10+0) 30 30+10 25+4 50+10

CAYm5 (LYGm2) (2010-11) 144 (120+24+0) 30 25+5 25+5 20+5

4.1. Enrolment Ratio (20) Enrolment Ratio= N1/N

Item
(Students enrolled at the First Year Level on average basis during the previous three Marks
academic years starting from current academic year)

>=90% students enrolled 20

>=80% students enrolled 18

>=70% students enrolled 16

>=60% students enrolled 14

>=50% students enrolled 12

Otherwise 0

Table B.4.1

4.2. Success Rate in the stipulated period of the program (40)

4.2.1. Success rate without backlogs in any semester/year of study (25)

SI= (Number of students who have graduated from the program without backlog)/
(Number of students admitted in the first year of that batch and actually admitted in 2nd
year via lateral entry and separate division, if applicable)

Average SI = Mean of Success Index (SI) for past three batches

Success rate without backlogs in any year of study = 25 × Average SI

Last Year of Last Year of Last Year of

Item Graduate, LYG Graduate minus 1, Graduate minus 2,

(CAYm4) LYGm1 (CAYm5) LYGm2 (CAYm6)

Number of students admitted in the

corresponding First Year + admitted in 2nd
year via lateral entry and separate
division, if applicable

Number of students who have graduated

without backlogs in the stipulated period

Success Index (SI)

Average SI

Table B.4.2.1

26
 4.2.2. Success rate in stipulated period of study (15)

SI= (Number of students who graduated from the program in the stipulated period of course duration)/
(Number of students admitted in the first year of that batch and actual admitted in 2nd year via lateral
entry and separate division, if applicable)

Average SI = mean of Success Index (SI) for past three batches

Success rate = 15 × Average SI

Last Year of Last Year of Last Year of Graduate

Item Graduate (LYG) Graduate minus 1, minus 2
(CAYm4) LYGm1(CAYm5) LYGm2(CAYm6)

Number of students admitted in the corresponding

First Year + admitted in 2nd year via lateral entry
and separate division, if applicable

Number of students who have graduated in the

stipulated period

Success Index (SI)

Average Success Index

Table B.4.2.2

Note: If 100% students clear without any backlog then also total marks scored will be 40 as both 4.2.1 &
4.2.2 will be applicable simultaneously.

4.3. Academic Performance in Third Year (15)

Academic Performance = 1.5 * Average API (Academic Performance Index)

API = ((Mean of 3rd Year Grade Point Average of all successful Students on a 10 point scale) or (Mean
of the percentage of marks of all successful students in Third Year/10)) x (number of successful
students/number of students appeared in the examination)

Successful students are those who are permitted to proceed to the final year.

Academic Performance CAYm1 CAYm2 CAYm3

Mean of CGPA or Mean Percentage of all successful students

(X)

Total no. of successful students (Y)

Total no. of students appeared in the examination (Z)

API = x* (Y/Z) AP 1 AP 2 AP 3

27
Average API = (AP1 + AP2 + AP3)/3

Table B.4.3

4.4. Academic Performance in Second Year (15)

Academic Performance Level = 1.5 * Average API (Academic Performance Index)

API = ((Mean of 2nd Year Grade Point Average of all successful Students on a 10 point scale) or
(Mean of the percentage of marks of all successful students in Second Year/10)) x (number of
successful students/number of students appeared in the examination)

Successful students are those who are permitted to proceed to the Third year.

Academic Performance CAYm1 CAYm2 CAYm3

Mean of CGPA or Mean Percentage of all successful students

(X)

Total no. of successful students (Y)

Total no. of students appeared in the examination (Z)

API = X* (Y/Z) AP 1 AP 2 AP 3

Average API = (AP1 + AP2 + AP3)/3

Table B.4.4

4.5. Placement, Higher Studies and Entrepreneurship (40)

Assessment Points = 40 × average placement

Item CAYm1 CAYm2 CAYm3

Total No. of Final Year Students (N)

No. of students placed in companies or Government Sector (x)

No. of students admitted to higher studies with valid qualifying scores
(GATE or equivalent State or National Level Tests, GRE, GMAT etc.) (y)
No. of students turned entrepreneur in engineering/technology (z)

x+y+z=

Placement Index : (x + y + z )/N P1 P2 P3

Average placement= (P1 + P2 + P3)/3

Table B.4.5

28
4.5a. Provide the placement data in the below mentioned format with the name of the

program and the assessment year:

Programs Name and Assessment Year

Name of the Appointment
Enrollment Name of the
S.no. student letter reference
no. Employer
placed no. with date

Table B.4.5a

4.6. Professional Activities (20)

4.6.1. Professional societies/chapters and organizing engineering events (5)

(The Department shall provide relevant details)

4.6.2. Publication of technical magazines, newsletters, etc. (5)

(The Department shall list the publications mentioned earlier along with the names of the
editors, publishers, etc.)

4.6.3. Participation in inter-institute events by students of the program of study (10)

(The Department shall provide a table indicating those publications, which received
awards in the events/conferences organized by other institutes.)

29
 CRITERION 5 Faculty Information and Contributions 200

5. FACULTY INFORMATION AND CONTRIBUTIONS (200)

Academic Research

(In case Currently Associated is (“No”)

Qualification

Association with the Institution

Professor/ Associate Professor

Date of Joining the Institution

Date on which Designated as
Name of the Faculty Member

Currently Associated (Y/N)

during the Assessment Years
Research Paper Publications

Nature of Association
(Regular/Contract)
Degree (highest degree)

Faculty Receiving Ph.D.

Date of Leaving
Year of attaining higher

Specialization
Department
Designation

Ph.D. Guidance
qualification
University

Table B.5

Note: Please provide details for the faculty of the department, cumulative information for all the shifts
for all academic years starting from current year in above format in Annexure - II.

5.1. Student-Faculty Ratio (SFR) (20)

(To be calculated at Department Level)

No. of UG Programs in the Department (n):

No. of PG Programs in the Department (m):
No. of Students in UG 2nd Year= u1
No. of Students in UG 3rd Year= u2
No. of Students in UG 4th Year= u3
No. of Students in PG 1st Year= p1
No. of Students in PG 2nd Year= p2

No. of Students = Sanctioned Intake + Actual admitted lateral entry students

(The above data to be provided considering all the UG and PG programs of the department)

S=Number of Students in the Department = UG1 + UG2 +… +UGn + PG1 + …PGn

F = Total Number of Faculty Members in the Department (excluding first year faculty)

Student Teacher Ratio (STR) = S / F

30
 Year CAY CAYm1 CAYm2
u1.1
u1.2
u1.3
UG1 u1.1+u1.2+u1.3 u1.1+u1.2+u1.3 u1.1+u1.2+u1.3
…
un.1
un.2
un.3
UGn un.1+un.2+un.3 un.1+un.2+un.3 un.1+un.2+un.3
p1.1
p1.2
PG1 p1.1+p1.2 p1.1+p1.2 p1.1+p1.2
…..
pm.1
pm.2
PGm pn.1+pn.2 pn.1+pn.2 pn.1+pn.2
UG1 + UG2 +.. UG1 + UG2 + ..
Total No. of Students in the UG1 + UG2 + .. +UGn
+UGn + PG1 + +UGn + PG1+…
Department (S) + PG1+… + PGn
…PGn + PGn
No. of Faculty in the
F1 F2 F3
Department (F)
Student Faculty Ratio (SFR) SFR1=S1/F1 SFR2= S2/F2 SFR3= S3/F3
Average SFR SFR=(SFR1+SFR2+SFR3)/3

Table B.5.1

Note: Marks to be given proportionally from a maximum of 20 to a minimum of 10 for average SFR
between 15:1 to 25:1, and zero for average SFR higher than 25:1. Marks distribution is given as below:

< = 15 - 20 Marks
< = 17 - 18 Marks
< = 19 - 16 Marks
< = 21 - 14 Marks
< = 23 - 12 Marks
< = 25 - 10 Marks
> 25.0 - 0 Marks
 Minimum 75% should be Regular faculty and the remaining shall be Contractual Faculty as per
AICTE norms and standards.

 The contractual faculty (doing away with the terminology of visiting/adjunct faculty, whatsoever)
who have taught for 2 consecutive semesters in the corresponding academic year on full time
basis shall be considered for the purpose of calculation in the Student Faculty Ratio.

5.1.1. Provide the information about the regular and contractual faculty as per the format
mentioned below:

Total number of regular faculty in Total number of contractual

the department faculty in the department
CAY
CAYm1
CAYm2
Table 5.1.1

31
5.2. Faculty Cadre Proportion (25)
The reference Faculty cadre proportion is 1(F1):2(F2):6(F3)

F1: Number of Professors required = 1/9 x Number of Faculty required to comply with 20:1
Student-Faculty ratio based on no. of students (N) as per 5.1

F2: Number of Associate Professors required = 2/9 x Number of Faculty required to comply with
20:1 Student-Faculty ratio based on no. of students (N) as per 5.1

F3: Number of Assistant Professors required = 6/9 x Number of Faculty required to comply with
20:1 Student-Faculty ratio based on no. of students (N) as per 5.1

Professors Associate Professors Assistant Professors

Year
Required F1 Available Required F2 Available Required F3 Available

CAY

CAYm1

CAYm2

Average
RF1= AF1= RF2= AF2= RF3= AF3=
Numbers

Table B.5.2

Cadre Ratio Marks= AF1 + AF2 x 0.6 + AF3 x 0.4 x 12.5

RF1 RF2 RF3

 If AF1 = AF2= 0 then zero marks

 Maximum marks to be limited if it exceeds 25

Example: Intake = 60 (i.e. total no. of students= 180); Required number of Faculty: 9; RF1= 1,
RF2=2 and RF3=6

Case 1: AF1/RF1= 1; AF2/RF2 = 1; AF3/RF3 = 1; Cadre proportion marks = (1+0.6+0.4) x 12.5

= 25

Case 2: AF1/RF1= 1; AF2/RF2 = 3/2; AF3/RF3 = 5/6; Cadre proportion marks = (1+0.9+0.3) x
12.5 = limited to 25

Case 3: AF1/RF1=0; AF2/RF2=1/2; AF3/RF3=8/6; Cadre proportion marks = (0+0.3+0.53) x

12.5 = 10.4

32
 5.3. Faculty Qualification (25)
FQ =2.5 x [(10X +4Y)/F)] where x is no. of regular faculty with Ph.D., Y is no. of
regular faculty with M.Tech. F is no. of regular faculty required to comply 20:1 Faculty
Student ratio (no. of faculty and no. of students required are to be calculated as per
5.1)

Years X Y F FQ=2.5 x [(10X +4Y)/F)]

CAY
CAYm1

CAYm2

Average Assessment

Table B.5.3

5.4. Faculty Retention (25)

No. of regular faculty members in CAYm1= CAY=

Item
Marks
(% of faculty retained during the period of assessment keeping CAYm2 as base year)

>=90% of required Faculty members retained during the period of assessment keeping 25
CAYm2 as base year)

>=75% of required Faculty members retained during the period of assessment keeping 20
CAYm2 as base year)

>=60% of required Faculty members retained during the period of assessment keeping 15
CAYm2 as base year)

>=50% of required Faculty members retained during the period of assessment keeping 10
CAYm2 as base year)

<50% of required Faculty members retained during the period of assessment keeping 0
CAYm2 as base year)

Table B.5.4

5.5. Innovations by the Faculty in Teaching and Learning (20)

Innovations by the Faculty in teaching and learning shall be summarized as per the following
description.

Contributions to teaching and learning are activities that contribute to the improvement of
student learning. These activities may include innovations not limited to, use of ICT, instruction
delivery, instructional methods, assessment, evaluation and inclusive class rooms that lead to
effective, efficient and engaging instruction. Any contributions to teaching and learning should
satisfy the following criteria:

 The work must be made available on Institute website

 The work must be available for peer review and critique

33
  The work must be reproducible and developed further by other scholars

The department/institution may set up appropriate processes for making the contributions
available to the public, getting them reviewed and for rewarding. These may typically include
statement of clear goals, adequate preparation, use of appropriate methods, significance of
results, effective presentation and reflective critique

5.6. Faculty as participants in Faculty development/training activities/STTPs (15)

 A Faculty scores maximum five points for participation

 Participation in 2 to 5 days Faculty development program: 3 Points

 Participation>5 days Faculty development program: 5 points

Max. 5 per Faculty

Name of the Faculty
CAYm1 CAYm2 CAYm3

Sum

RF= Number of Faculty required to comply

with 20:1 Student-Faculty ratio as per 5.1

Assessment = 3 × (Sum/0.5RF)

(Marks limited to 15)

Average assessment over three years (Marks limited to 15) =

Table B.5.6

5.7. Research and Development (30)

5.7.1. Academic Research (10)

Academic research includes research paper publications, Ph.D. guidance, and faculty
receiving Ph.D. during the assessment period.

 Number of quality publications in refereed/SCI Journals, citations, Books/Book Chapters

etc. (6)

 Ph.D. guided /Ph.D. awarded during the assessment period while working in the
institute (4)

All relevant details shall be mentioned.

34
 5.7.2. Sponsored Research (5)

 Funded research:

(Provide a list with Project Title, Funding Agency, Amount and Duration)

Funding amount (Cumulative during CAYm1, CAYm2 and CAYm3):

Amount > 20 Lakh –5 Marks
Amount >= 16 Lakh and <= 20 Lakh –4 Marks
Amount >= 12 Lakh and < 16 Lakh –3 Marks
Amount >= 8 Lakh and < 12 Lakh –2 Marks
Amount >= 4 Lakh and < 8 Lakh –1 Mark
Amount < 4 Lakh –0 Mark

5.7.3. Development activities (10)

Provide details:
 Product Development
 Research laboratories
 Instructional materials
 Working models/charts/monograms etc.

5.7.4. Consultancy (from Industry) (5)

(Provide a list with Project Title, Funding Agency, Amount and Duration)

Funding amount (Cumulative during CAYm1, CAYm2 and CAYm3):

Amount > 10 Lakh – 5 Marks
Amount >= 8 Lakh and <= 10 Lakh – 4 Marks
Amount >= 6 Lakh and < 8 Lakh – 3 Marks
Amount >= 4 Lakh and < 6 Lakh – 2 Marks
Amount >= 2 Lakh and < 4 Lakh – 1 Mark
Amount < 2 Lakh – 0 Mark

5.8. Faculty Performance Appraisal and Development System (FPADS) (30)

Faculty members of Higher Educational Institutions today have to perform a variety of tasks
pertaining to diverse roles. In addition to instruction, Faculty members need to innovate and
conduct research for their self-renewal, keep abreast with changes in technology, and develop
expertise for effective implementation of curricula. They are also expected to provide services to
the industry and community for understanding and contributing to the solution of real life problems
in industry. Another role relates to the shouldering of administrative responsibilities and co-
operation with other Faculty, Heads-of-Departments and the Head of Institute. An effective
performance appraisal system for Faculty is vital for optimizing the contribution of individual
Faculty to institutional performance.

The assessment is based on:

 A well-defined system for faculty appraisal for all the assessment years (10)

 Its implementation and effectiveness (20)

35
5.9. Visiting/Adjunct/Emeritus Faculty etc. (10)

Adjunct faculty also includes Industry experts. Provide details of participation and contributions in
teaching and learning and /or research by visiting/adjunct/Emeritus faculty etc. for all the
assessment years:
 Provision of inviting/having visiting/adjunct/emeritus faculty (1)

 Minimum 50 hours per year interaction with adjunct faculty from industry/retired professors
etc.
(Minimum 50 hours interaction in a year will result in 3 marks for that year; 3 marks x 3
years = 9 marks)

36
 CRITERION 6 Facilities and Technical Support 80

6. FACILITIES AND TECHNICAL SUPPORT (80)

6.1. Adequate and well equipped laboratories, and technical manpower (30)

Weekly Technical Manpower support

No. of utilization
students status
Name of Name of the
Sr. per setup (all the
the Important Name of the
No. courses
Laboratory (Batch equipment technical Designation Qualification
for which
Size) staff
the lab is
utilized)

1.

N.

Table B.6.1

6.2. Additional facilities created for improving the quality of learning experience in
laboratories (25)

Areas in which
Sr. Reason(s) for students’ are
Facility Name Details Utilization Relevance to
No. creating facility expected to have
POs/PSOs
enhanced learning

1.

N.

Table B.6.2
6.3. Laboratories: Maintenance and overall ambiance (10)
(Self-Explanatory)

6.4. Project laboratory (5)

(Mention facilities & Utilization)

6.5. Safety measures in laboratories (10)

Sr. No. Name of the Laboratory Safety measures

1.

2.

N.

Table B.6.5

37
 CRITERION 7 Continuous Improvement 50

7. CONTINUOUS IMPROVEMENT (50)

7.1. Actions taken based on the results of evaluation of each of the POs & PSOs (20)

Identify the areas of weaknesses in the program based on the analysis of evaluation of POs & PSOs
attainment levels. Measures identified and implemented to improve POs & PSOs attainment levels
for the assessment years.

Actions to be written as per table in 3.3.2.

Examples of analysis and proposed action

Sample 1-Course outcomes for a laboratory course did not measure up, as some of the lab
equipment did not have the capability to do the needful (e.g., single trace oscilloscopes available
where dual trace would have been better, or, non-availability of some important support software
etc.). Action taken-Equipment up-gradation was carried out (with details of up-gradation)

Sample 2-In a course on EM theory student performance has been consistently low with respect
to some COs. Analysis of answer scripts and discussions with the students revealed that this could
be attributed to a weaker course on vector calculus.

Action taken-revision of the course syllabus was carried out (instructor/text book changed too has
been changed, when deemed appropriate).

Sample 3-In a course that had group projects it was determined that the expectations from this
course about PO3 (like: “to meet the specifications with consideration for the public health and
safety, and the cultural, societal, and environmental considerations”) were not realized as there
were no discussions about these aspects while planning and execution of the project. Action taken-
Project planning, monitoring and evaluation included in rubrics related to these aspects.

POs & PSOs Attainment Levels and Actions for improvement – CAY

POs Target Attainment

Observations
Level Level

PO1: Statement as mentioned in Annexure I

PO1

Action 1:

Action N:

PO2:Statement as mentioned in Annexure I

PO2

Action 1:

Action N:

38
PO3: Statement as mentioned in Annexure I

PO3

Action 1:

Action N:

PO4: Statement as mentioned in Annexure I

PO4

Action 1:

Action N:

PO5: Statement as mentioned in Annexure I

PO5

Action 1:

Action N:

PO6 :Statement as mentioned in Annexure I

PO6

Action 1:

Action N:

PO7:Statement as mentioned in Annexure I

PO7

Action 1:

Action N:

PO8:Statement as mentioned in Annexure I

PO8

Action 1:

Action N:

PO9 :Statement as mentioned in Annexure I

PO9

Action 1:

Action N:

PO10 :Statement as mentioned in Annexure I

39
PO10

Action 1:

Action N:

PO11 :Statement as mentioned in Annexure I

PO11

Action 1:

Action N:

PO12 :Statement as mentioned in Annexure I

PO12

Action 1:

Action N:

Similar information is to be provided for PSOs

Table B.7.1

Similar Tables should be presented for CAYm1 and CAYm2

7.2. Academic Audit and actions taken thereof during the period of Assessment (10)

(Academic Audit system/process and its implementation in relation to Continuous Improvement)

7.3. Improvement in Placement, Higher Studies and Entrepreneurship (10)

Assessment is based on improvement in:

 Placement: number, quality placement, core industry, pay packages etc.

 Higher studies: performance in GATE, GRE, GMAT, CAT etc., and admissions in premier
institutions

 Entrepreneurs

7.4. Improvement in the quality of students admitted to the program (10)

Assessment is based on improvement in terms of ranks/score in qualifying state level/national

level entrances tests, percentage marks in Physics, Chemistry and Mathematics in 12 th Standard
and percentage marks of the lateral entry students.

Item CAY CAYm1 CAYm2

No. of Students admitted

National Level Entrance
Examination (Name of the
Opening Score/Rank

40
Entrance Examination)
Closing Score/Rank

State/University/Level Entrance No. of Students admitted

Examination/Others
Opening Score/Rank
(Name of the Entrance
Examination) Closing Score/Rank

No. of Students admitted

Name of the Entrance
Examination for Lateral Entry or Opening Score/Rank
lateral entry details
Closing Score/Rank

Average CBSE/Any other Board Result of admitted

students (Physics, Chemistry & Maths)

Table B.7.4

41
 CRITERION 8 First Year Academics 50

8. FIRST YEAR ACADEMICS (50)

8.1. First Year Student-Faculty Ratio (FYSFR) (5)

Data for first year courses to calculate the FYSFR:

Number of
Number of faculty *Assessment = (5 ×20)/
students
Year members (considering FYSFR FYSFR
(approved
fractional load) (Limited to Max. 5)
intake strength)

CAY

CAYm1

CAYm2

Average

Table B.8.1

*Note: If FYSFR is greater than 25, then assessment equal to zero.

8.2. Qualification of Faculty Teaching First Year Common Courses (5)

Assessment of qualification = (5x +3y)/RF, x= Number of Regular Faculty with Ph.D, y = Number
of Regular Faculty with Post-graduate qualification RF= Number of faculty members required as
per SFR of 20:1, Faculty definition as defined in 5.1

Assessment of faculty
Year x Y RF
qualification (5x + 3y)/RF

CAY

CAYm1

CAYm2

Average Assessment

Table B.8.2

42
8.3. First Year Academic Performance (10)

Academic Performance = ((Mean of 1st Year Grade Point Average of all successful Students on a 10
point scale) or (Mean of the percentage of marks in First Year of all successful students/10)) x
(number of successful students/number of students appeared in the examination)

Successful students are those who are permitted to proceed to the second year.

8.4. Attainment of Course Outcomes of first year courses (10)

8.4.1. Describe the assessment processes used to gather the data upon which the
evaluation of Course Outcomes of first year is done (5)

(Examples of data collection processes may include, but are not limited to, specific exam
questions, laboratory tests, internally developed assessment exams, oral exams
assignments, presentations, tutorial sheets etc.)

8.4.2. Record the attainment of Course Outcomes of all first year courses (5)

Program shall have set attainment levels for all first year courses.

(The attainment levels shall be set considering average performance levels in the university
examination or any higher value set as target for the assessment years. Attainment level is
to be measured in terms of student performance in internal assessments with respect the
COs of a subject plus the performance in the University examination)

Refer to 3.2.2 for further details

8.5. Attainment of Program Outcomes from first year courses (20)

8.5.1. Indicate results of evaluation of each relevant PO and/or PSO, if applicable (15)

The relevant program outcomes that are to be addressed at first year need to be identified
by the institution.

Program Outcome attainment levels shall be set for all relevant POs and/or PSOs through
first year courses.

(Describe the assessment processes that demonstrate the degree to which the Program
Outcomes are attained through first year courses and document the attainment levels. Also
include information on assessment processes used to gather the data upon which the
evaluation of each Program Outcome is based indicating the frequency with which these
processes are carried out)

PO Attainment: Mention first year details from table 3.1.3

Course PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12

C101

C102

43
 ….

Direct
Attainment*

Table B.8.5.1

* Direct attainment level of a PO is determined by taking average across all courses addressing that
PO. Fractional numbers may be used for example 1.55.

Note: Add PSOs; if applicable

8.5.2. Actions taken based on the results of evaluation of relevant POs (5)

(The attainment levels by direct (student performance) are to be presented through Program
level Course-PO matrix as indicated)

PO Attainment Levels and Actions for improvement - CAY – Mention for relevant POs

POs Target Attainment

Observations
Level Level

PO1: Statement as mentioned in Annexure I

PO1

Action 1:

Action N:

PO2:Statement as mentioned in Annexure I

PO2

Action 1:

Action N:

PO3: Statement as mentioned in Annexure I

PO3

Action 1:

Action N:

PO4: Statement as mentioned in Annexure I

PO4

Action 1:

Action N:

PO5: Statement as mentioned in Annexure I

44
PO5

Action 1:

Action N:

PO6 :Statement as mentioned in Annexure I

PO6

Action 1:

Action N:

PO7:Statement as mentioned in Annexure I

PO7

Action 1:

Action N:

PO8:Statement as mentioned in Annexure I

PO8

Action 1:

Action N:

PO9 :Statement as mentioned in Annexure I

PO9

Action 1:

Action N:

PO10 :Statement as mentioned in Annexure I

PO10

Action 1:

Action N:

PO11 :Statement as mentioned in Annexure I

PO11

Action 1:

Action N:

PO12 :Statement as mentioned in Annexure I

PO12

45
Action 1:

Action N:

Table B.8.5.2

Note: PSOs, if applicable to be added appropriately.

Similar Tables should be presented for CAYm1 and CAYm2

46
 CRITERION 9 Student Support Systems 50

9. STUDENT SUPPORT SYSTEMS (50)

9.1 Mentoring system to help at individual level (5)

Type of mentoring: Professional guidance/career advancement/course work specific/laboratory

specific/all-round development. Number of faculty mentors: Number of students per mentor:
Frequency of meeting:

(The institution may report the details of the mentoring system that has been developed for the
students for various purposes and also state the efficacy of such system)

9.2. Feedback analysis and reward /corrective measures taken, if any (10)

Feedback collected for all courses: YES/NO; Specify the feedback collection process; Average
Percentage of students who participate; Specify the feedback analysis process; Basis of reward/
corrective measures, if any; Indices used for measuring quality of teaching & learning and
summary of the index values for all courses/teachers; Number of corrective actions taken.

9.3. Feedback on facilities (5)

Assessment is based on student feedback collection, analysis and corrective action taken.

9.4. Self-Learning (5)

(The institution needs to specify the facilities, materials and scope for self-learning / learning
beyond syllabus, Webinars, Podcast, MOOCs etc. and evaluate their effectiveness)

9.5. Career Guidance, Training, Placement (10)

(The institution may specify the facility, its management and its effectiveness for career guidance
including counseling for higher studies, campus placement support, industry interaction for
training/internship/placement, etc.)

9.6. Entrepreneurship Cell (5)

(The institution may describe the facility, its management and its effectiveness in encouraging
entrepreneurship and incubation) (Success stories for each of the assessment years are to be
mentioned)

9.7. Co-curricular and Extra-curricular Activities (10)

(The institution may specify the co-curricular and extra-curricular activities) (Quantify activities
such as NCC, NSS etc.)

47
 Governance, Institutional Support and Financial
CRITERION 10 120
Resources

10. GOVERNANCE, INSTITUTIONAL SUPPORT AND FINANCIAL RESOURCES (120)

10.1. Organization, Governance and Transparency (40)

10.1.1. State the Vision and Mission of the Institute (5)

(Vision statement typically indicates aspirations and Mission statement states the
broad approach to achieve aspirations)

10.1.2. Governing body, administrative setup, functions of various bodies, service

rules, procedures, recruitment and promotional policies (10)

List the governing, senate, and all other academic and administrative bodies; their
memberships, functions, and responsibilities; frequency of the meetings; and
attendance therein, in a tabular form. A few sample minutes of the meetings and
action-taken reports should be annexed.

The published rules including service rules, policies and procedures; year of
publication shall be listed. Also state the extent of awareness among the
employees/students.

10.1.3. Decentralization in working and grievance redressal mechanism (10)

List the names of the faculty members who have been delegated powers for taking
administrative decisions. Mention details in respect of decentralization in working.
Specify the mechanism and composition of grievance redressal cell including Anti
Ragging Committee & Sexual Harassment Committee.

10.1.4. Delegation of financial powers (10)

Institution should explicitly mention financial powers delegated to the Principal,

Heads of Departments and relevant in-charges. Demonstrate the utilization of
financial powers for each year of the assessment years.

10.1.5. Transparency and availability of correct/unambiguous information in public

domain (5)

(Information on policies, rules, processes and dissemination of this information to

stakeholders is to be made available on the web site)

10.2. Budget Allocation, Utilization, and Public Accounting at Institute level (30)

Summary of current financial year’s budget and actual expenditure incurred (for the institution
exclusively) in the three previous financial years.

48
 Total Income at Institute level: For CFY, CFYm1, CFYm2 & CFYm3

CFY: Current Financial Year, CFYm1 (Current Financial Year minus 1), CFYm2 (Current
Financial Year minus 2) and CFYm3 (Current Financial Year minus 3)

For CFY

Total No. of
Actual expenditure (till …): students:
Total Income:

Fee Govt. Grant(s) Other Recurring Non- Special Expenditure

Sources including recurring Projects/Any per student
Salaries other,
(specify)
specify

Table B.10.2a

Note: Similar tables are to be prepared for CFYm1, CFYm2 & CFYm3.

Actual
Actual Actual Actual
Budgeted expenses Budgeted Budgeted Budgeted
Items Expenses Expenses Expenses
in CFY in CFY in CFYm1 in CFYm2 in CFYm3
in CFYm1 in CFYm2 in CFYm3
(till …)

Infrastructure
Built-Up

Library

Laboratory
equipment

Laboratory
consumables

Teaching and
non-teaching
staff salary

Maintenance
and spares

49
 R&D

Training and
Travel

Miscellaneous
expenses *

Others,
specify

Total

Table B.10.2b

* Items to be mentioned.

10.2.1. Adequacy of budget allocation (10)

(The institution needs to justify that the budget allocated during assessment years
was adequate)

10.2.2. Utilization of allocated funds (15)

(The institution needs to state how the budget was utilized during assessment years)

10.2.3. Availability of the audited statements on the institute’s website (5)

(The institution needs to make audited statements available on its website)

10.3. Program Specific Budget Allocation, Utilization (30)

Total Budget at program level: For CFY, CFYm1, CFYm2 & CFYm3

CFY: Current Financial Year, CFYm1 (Current Financial Year minus 1), CFYm2 (Current
Financial Year minus 2) and CFYm3 (Current Financial Year minus 3).

For CFY

Total No. of
Actual expenditure (till …): students:
Total Budget:

Non recurring Recurring Non Recurring Recurring Expenditure

per student

Table B.10.3a

Note: Similar tables are to be prepared for CFYm1, CFYm2 & CFYm3.

50
 Actual
Actual Actual Actual
Budgeted expenses Budgeted Budgeted Budgeted
Items Expenses Expenses Expenses
in CFY in CFY (till in CFYm1 in CFYm2 in CFYm3
in CFYm1 in CFYm2 in CFYm3
…)

Laboratory
equipment

Software

Laboratory
consumable

Maintenance and
spares

R&D

Training and
Travel

Miscellaneous
expenses *

Total

Table B.10.3b

* Items to be mentioned.

10.3.1. Adequacy of budget allocation (10)

(Program needs to justify that the budget allocated over the assessment years was
adequate for the program)

10.3.2. Utilization of allocated funds (20)

(Program needs to state how the budget was utilized during the last three assessment
years)

10.4. Library and Internet (20)

(Indicate whether zero deficiency report was received by the Institution for all the assessment
years. Effective availability/purchase records and utilization of facilities/equipment etc. to be
documented and demonstrated)

51
10.4.1. Quality of learning resources (hard/soft) (10)

 Relevance of available learning resources including e-resources

 Accessibility to students
 Support to students for self-learning activities

10.4.2. Internet (10)

 Name of the Internet provider:
 Available bandwidth:
 Wi Fi availability:
 Internet access in labs, classrooms, library and offices of all Departments:
 Security arrangements:

52
 Declaration

(The head of the institution needs to make a declaration as per the format given)

I undertake that, the institution is well aware about the provisions in the NBA’s accreditation
manual concerned for this application, rules, regulations, notifications and NBA expert visit
guidelines in force as on date and the institute shall fully abide by them.

It is submitted that information provided in this Self Assessment Report is factually correct. I
understand and agree that an appropriate disciplinary action against the Institute will be
initiated by the NBA, in case any false statement/information is observed during pre-visit,
visit, post visit and subsequent to grant of accreditation.

Date: Signature & Name

Place: Head of the Institution with seal

53
 ANNEXURE I:

(A) PROGRAM OUTCOMES(POs)

Engineering Graduates will be able to:

1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering

fundamentals, and an engineering specialization to the solution of complex engineering problems.

2. Problem analysis: Identify, formulate, review research literature, and analyze complex
engineering problems reaching substantiated conclusions using first principles of mathematics,
natural sciences, and engineering sciences.

3. Design/development of solutions: Design solutions for complex engineering problems and

design system components or processes that meet the specified needs with appropriate
consideration for the public health and safety, and the cultural, societal, and environmental
considerations.

4. Conduct investigations of complex problems: Use research-based knowledge and research

methods including design of experiments, analysis and interpretation of data, and synthesis of the
information to provide valid conclusions.

5. Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern
engineering and IT tools including prediction and modeling to complex engineering activities with an
understanding of the limitations.

6. The engineer and society: Apply reasoning informed by the contextual knowledge to assess
societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the
professional engineering practice.

7. Environment and sustainability: Understand the impact of the professional engineering solutions
in societal and environmental contexts, and demonstrate the knowledge of, and need for
sustainable development.

8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of
the engineering practice.

9. Individual and team work: Function effectively as an individual, and as a member or leader in
diverse teams, and in multidisciplinary settings.

10. Communication: Communicate effectively on complex engineering activities with the engineering
community and with society at large, such as, being able to comprehend and write effective reports
and design documentation, make effective presentations, and give and receive clear instructions.

11. Project management and finance: Demonstrate knowledge and understanding of the
engineering and management principles and apply these to one’s own work, as a member and
leader in a team, to manage projects and in multidisciplinary environments.

12. Life-long learning: Recognize the need for, and have the preparation and ability to engage in
independent and life-long learning in the broadest context of technological change.

(B) PROGRAM SPECIFIC OUTCOMES (PSOs)

Program shall specify 2-4 program specific outcomes.

54