DTC 5618

Main Features
Advanced QAM demodulation and MPEG-II decoding technologies, which is able

to receive and decode all digital cable TV programs compatible by DVB/MPEG II.
It is a high performance digital cable decoder characteristic of fast program
switching, automatic search for frequency and encoding rate, password locking,
conditional access, friendly user interface and ease of use.
² Support QAM16, 32, 64, 128 and 256 modulation systems
² Select Televising pattern automatically
² Friendly user interface
² Super-clear screen and hi-fi digital stereophonic output
² Conditional access system (CA)
² Electronic program guide (EPG)
² OTA Support
Packing list
Your Set-Top-Box also includes the following items:

ď1Đ1 Pcs Digital cable STB (Set-Top-Box)
ď2Đ1 Pcs AV cable 1.5M
ď3Đ1 Pcs Remote control unit (RCU)
ď4Đ2 Pcs battery
ď5Đ1 Pcs User's manual

Contents

1. Safety Instructions ........................................................................ 1
2. Description of the Receiver .......................................................... 2
1) Up panel .................................................................................................. 2
2) Rear panel............................................................................................... 3
3) Connection .............................................................................................. 3
4) Remote control Unit (RCU) ..................................................................... 5
3. Function Introduce ........................................................................ 7
4. Installation ...................................................................................... 8
1) Automatic Scan ....................................................................................... 8
2) Manual Scan ........................................................................................... 9
3) Factory Reset .......................................................................................... 9
5. Record .......................................................................................... 10
1) Record program .................................................................................... 10
2) Playback Recording file ......................................................................... 10
3) Time Shift Record .................................................................................. 11
6. Software upgrade .........................................................................11
7. Troubleshooting .......................................................................... 12

1. Safety Instructions
Please read this Do not allow the

user's manual Receiver to be
carefully before exposed to
using. extreme heat,
cold or humid
conditions.
Do not remote the Do not put any
cover to prevent heavy object over
electrical shock or the Receiver.
damage.
If the Receiver When the

remains unused Receiver is
for a long time moved to another
please unplug place with a sharp
power cord to temperature
prevent from fire or difference, please
electrical shock. don't turn on the
Do not use a Receiver
damaged power immediately until
cord. 1-2 hours later.
Never allow Use a soft and
liquids, spray or dry cloth to clean
other materials to casing. Prior to
come into insider clearing, please
of the Receiver. pull off the power
cord.
Please place the Non-professional
Receiver personnel are
horizontally to forbidden to open
prevent damaged. the Receiver,
which may result
in electrical
shock.
1
2. Description of the Receiver
1) Up panel
1 —Menu/exit Display main menu or exit to TV

2 —CH+ Change the channels
3 —CH- Change the channels
4 —VOL-/OK Adjusts the volume or Executes the selected item
5 —VOL+/RETURN Adjusts the volume or Back to previous menu
6 —Smart Card slot Interface of Smart Card
2
2) Rear panel
1 k DC power input
2 k Video output
3 k Right & Left-channel audio output
4 k USB input
5 k CABLE IN
6 k LOOP OUT
3) Connection
1. Connection of conditional access

Insert smart card with the
marked surface upwards into
the upper slot horizontally
according to the indication of
the arrow
(As the screen on the right).
Warning: Don’t insert or
draw out the smart card when it is
working.
3
2. Connection of rear panel
A. Choose the correct RF cable, connecting the Terminal of cable input to
receiver with RF cable. (As follow screen)

B. Connect the TV (Video) to Receiver “CVBS "using the AV cables (Yellow
color).
Connect the TV (L/R Audio) to Receiver “L/R" using the AV cables (Red/
White color).
If there's only one Audio terminal on the TV set, please connect L/R Audio
anyone from the Receiver to TV. (As follow screen

C. Connect power cord to DC 5V/1.5A
4
4) Remote control Unit (RCU)
5
1. Standby Turn on/off the Receiver by RCU
2 0-9 Directly selects a channel or changes a parameter
3 Within a menu, moves to the next higher or lower item
Ÿ/ź In TV or Radio mode, moves to the next higher or lower
channel
4 Within a menu, moves to the left or right item in the
Ż/Ź menu
In TV or Radio mode, adjusts the volume
5 Returns to the previous menu or escapes out of the
EXIT
menu
6 CH+/- Change the channels
7. Mutes the sound

8 FAV Display the favorite channel list
9 VOL+/- Adjusts the volume
10 EPG Display the Electronic Program Guide
11 MENU Display main menu
12 Executes the selected item or displays the list of
OK
channels
13. INFO Display information about the current channel
14 TV/RADIO Switch between TV mode and Radio mode
15. RED /GREEN
/YELLOW Functions are decided by specific applications
/BLUE key
16 LIST Display channel list
17 HELP Display receiver help information
18 BACK Recall to previous channel
19 REW/FWD/PLA
Y/STOP/REC/P PVR key:For control program recording and playback
AUSE
20 Audio Display audio list

21 TV: VOL+/-/ Learning key. For control TV directly after your setting.
Power/AV
6
3. Function Introduce
After connections are completed, the
Receiver is switched on. The screen
displays the main menu. (As the
screen on the right)
It includes the following menus:

[Installation]: Manual or Auto scan for TV/Radio programs.
[Edit]: This menu is for edit channels.
[System]: In this menu. Users can set the working environment of the receiver
according to the actual needs.
[Utility]: Users can check calendar and update software. also can playback
recording file.
[CAS]: Users can check CA status and Smartcard status.
7
4. Installation

ǏInstallationǐ In this menu, users can install the program.
Press <MENU> to display main
menu. Use <Ż> <Ź> keys to select
[Installation], then press <OK> key
for confirm.
[Installation] includes [Automatic
Scan], [Manual scan], [Factory
Reset].
1) Automatic Scan
In ǏInstallationǐ, use <Ÿ> <ź>

keys to select [Automatic Scan] and
press <OK> key for confirm
Then press<OK>key to go on to scan
During scan process, press
<Exit> key to stop and exit scan.
8
2) Manual Scan
In ǏInstallationǐ, use <Ÿ> <ź>

keys to select [Manual Scan] and
press <OK> key for confirm.
Need to input parameters for
[manual Scan], when you select
[manual Scan]. The page on the
right will appear; users need to input
the Freq (MHz), Symbol Rate, QAM
Mode and other options, then press
<OK> key to scan immediately.
3) Factory Reset
In ǏInstallationǐ, use <Ÿ> <ź> keys to select [Factory Reset] and press <OK>
key for confirm.
If you want to reset your receiver,
press <Yes> to confirm, if not move
to <No> to cannel. (As screen on the
right).
*You may be required to enter PIN
code (default is “0000”) once you
enter any sub-menu under
INSTALLATION
Warning:
Be careful to use the operation of [Factory Reset] for you will lose all of the data
that has been installed on your Receiver (channels, lists of favorites, etc.)

9
5. Record
Be careful of inserting USB device. Nonsupport inserting USB hard disk without
external power, the electric current maybe damages your disk.
1) Record program
After connected USB disk. In the
normal state of TV program, press
<ƽ> key, The receiver will be enter
the recording .
Press < Ƶ > key can stop the
recording.
The record size can configure in
ǏSystem]ǐuse <Ÿ> <ź> keys to
select ǏSystem Configurationǐand
press < OK > key for confirm . The
item ofǏRecord Sizeǐcan change
from 1 hours to 12 hours.
2) Playback recording file

The receiver has two methods to enter the recording file list
Method 1: in ǏUtilityǐ, use <Ÿ>

<ź> keys to select ǏRecording File
Listǐ
Method 2: in the normal state of TV
program, press < LIST> key to direct
enter theǏRecording File Listǐ
10
3) Time Shift Record
After connected USB disk, in the
normal state of TV program press
< ͢͢> key can enter the time shift
mode that pause the program
playing.
When you want to continue watch
program press the <Ź> key can
direct enter the time shift record play
from the pause time.
When you want to catch up the actually time press the <Ƶ> key to enter the
normal state.
6. Software upgrade
This Receiver has automatically

searching upgrade function. In
normal view mode, system will
detect and download the upgrade
information automatically.
Once relevant upgrade information is
detected, system will appear a
message box as the screen on the
right.
The update process will take a time;
during process don’t cut the power.
Once the upgrade process complete, the receiver will return back standby or play
TV.

11
7. Troubleshooting
In case of failures which are not necessarily breakdowns of the receiver. Before
they are sent for repair, please check as per the following table:
Failure Possible cause Troubleshooting method
After startup, there’s

Power plug is not Insert the plug into the
nothing display on
connected. socket firmly.
the front panel.
Signal cable is not Connect RF input cable
“No TV signal”
connected properly. properly.
displayed on the
The parameter is not set Check and set parameters
screen
correctly. correctly.
Connect the cable
Audio cable is not
according to wiring
connected.
diagram again.
No voice in the Turn on voice and adjust
speaker properly Voice is closed.
volume louder.
Output voice channel is Enter System Setup to try

not correct. other audio channels.
Connect the cable
Video cable is not
There’s just voice, according to wiring
connected properly.
no image on the TV diagram again.
screen Radio program is tuned in Press <TV> key to switch
to. to TV program.
Power of battery is
Replace battery.
running out.
Remote controller
can’t be operated Remote controller is not Aim at the remote
aimed at properly or is too controller and shorten the
far away. distance.
There’s halt or
Measures should be taken
mosaic phenomena Signals are too weak
to strengthen signals.
on the images
12

DTC 5618

Uploaded by

Copyright:

Available Formats

DTC 5618

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DTC 5618

Uploaded by

Copyright:

Available Formats

Main Features

Advanced QAM demodulation and MPEG-II decoding technologies, which is able

Your Set-Top-Box also includes the following items:

Please read this Do not allow the

If the Receiver When the

1 —Menu/exit Display main menu or exit to TV

1. Connection of conditional access

7. Mutes the sound

20 Audio Display audio list

It includes the following menus:

In ǏInstallationǐ, use <Ÿ> <ź>

In ǏInstallationǐ, use <Ÿ> <ź>

2) Playback recording file

Method 1: in ǏUtilityǐ, use <Ÿ>

This Receiver has automatically

Failure Possible cause Troubleshooting method

After startup, there’s

Output voice channel is Enter System Setup to try

You might also like