Scribd
Upload
1K views2 pages

SP 16 Tables

The document provides tables with percentages of flexural reinforcement (Pt) required for singly and doubly reinforced concrete sections based on the ratio of bending moment to section modulus (Mu/bd^2). For singly reinforced sections, Pt is provided for various Mu/bd^2 ratios from 0.3 to 3.3. For doubly reinforced sections, Pt and compression steel percentage (Psc) are given for different Mu/bd^2 ratios from 3.33 to 7.7 and various ratios of depth of compression block to effective depth (d'/d). The tables allow determining the required flexural reinforcement for concrete beams based on the bending moment and section properties.

Uploaded by

Prashant Bhimrao Kamate
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

SP 16 Tables

The document provides tables with percentages of flexural reinforcement (Pt) required for singly and doubly reinforced concrete sections based on the ratio of bending moment to section modulus (Mu/bd^2). For singly reinforced sections, Pt is provided for various Mu/bd^2 ratios from 0.3 to 3.3. For doubly reinforced sections, Pt and compression steel percentage (Psc) are given for different Mu/bd^2 ratios from 3.33 to 7.7 and various ratios of depth of compression block to effective depth (d'/d). The tables allow determining the required flexural reinforcement for concrete beams based on the bending moment and section properties.

Uploaded by

Prashant Bhimrao Kamate
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Flexure -Reinforcement Percentage (Pt) For Singly Reinforced Section

Grade of Concrete = M25


Grade of steel = Fe500
Limiting Percentage of steel = 0.36/0.87 x (fck/fy) x (Xumax/d) x 100
Pt lim = 0.944%

Pt req = 0.498 x (fck/fy) - SQRT(0.248 x fck/fy)^2 - 1.144 x (fck/fy^2) x Mu/bd^2 )

Mu /bd2 Pt % Mu /bd2 Pt %
0.30 0.070 1.85 0.470
0.35 0.082 1.90 0.484
0.40 0.094 1.95 0.498
0.45 0.106 2.00 0.513
0.50 0.118 2.05 0.527
0.55 0.130 2.10 0.542
0.60 0.142 2.15 0.557
0.65 0.154 2.20 0.571
0.70 0.166 2.25 0.586
0.75 0.179 2.30 0.601
0.80 0.191 2.35 0.617
0.85 0.204 2.40 0.632
0.90 0.216 2.45 0.647
0.95 0.229 2.50 0.663
1.00 0.242 2.55 0.679
1.05 0.254 2.60 0.695
1.10 0.267 2.65 0.711
1.15 0.280 2.70 0.727
1.20 0.293 2.75 0.743
1.25 0.306 2.80 0.760
1.30 0.319 2.85 0.776
1.35 0.333 2.90 0.793
1.40 0.346 2.95 0.810
1.45 0.359 3.00 0.827
1.50 0.373 3.05 0.844
1.55 0.386 3.10 0.862
1.60 0.400 3.15 0.880
1.65 0.414 3.20 0.898
1.70 0.428 3.25 0.916
1.75 0.441 3.30 0.934
1.80 0.455 3.32 0.941
Flexure -Reinforcement Percentage (Pt) For Doubly Reinforced Section

Grade of Concrete = M25


Grade of steel = Fe500
Limiting Percentage of steel = 0.36/0.87 x (fck/fy) x (Xumax/d) x 100
Pt lim = 0.944%
Mulim/bd2 = 0.133 x fck = 3.3260

Pt2 req = ( (Mu/bd^2 - Mulim/bd^2) / (0.87fy) (1 - (d'/d)) )100

d'/d = 0.05 d'/d = 0.1 d'/d = 0.15 d'/d = 0.2


Mu /bd2 Pt % Psc % Pt % Psc % Pt % Psc % Pt % Psc %
3.33 0.944 0.000 0.944 0.000 0.944 0.000 0.944 0.000
3.40 0.961 0.019 0.962 0.021 0.964 0.023 0.965 0.026
3.50 0.986 0.044 0.988 0.048 0.991 0.053 0.994 0.061
3.60 1.010 0.070 1.013 0.076 1.018 0.084 1.022 0.095
3.70 1.034 0.095 1.039 0.104 1.045 0.115 1.051 0.130
3.80 1.058 0.121 1.065 0.131 1.072 0.145 1.080 0.165
3.90 1.082 0.146 1.090 0.159 1.099 0.176 1.108 0.200
4.00 1.107 0.172 1.116 0.187 1.126 0.207 1.137 0.235
4.10 1.131 0.197 1.141 0.215 1.153 0.237 1.166 0.270
4.20 1.155 0.223 1.167 0.242 1.180 0.268 1.195 0.304
4.30 1.179 0.248 1.192 0.270 1.207 0.299 1.223 0.339
4.40 1.203 0.274 1.218 0.298 1.234 0.329 1.252 0.374
4.50 1.228 0.299 1.243 0.325 1.261 0.360 1.281 0.409
4.60 1.252 0.325 1.269 0.353 1.288 0.390 1.310 0.444
4.70 1.276 0.350 1.294 0.381 1.315 0.421 1.338 0.479
4.80 1.300 0.376 1.320 0.409 1.342 0.452 1.367 0.513
4.90 1.324 0.401 1.346 0.436 1.369 0.482 1.396 0.548
5.00 1.349 0.427 1.371 0.464 1.396 0.513 1.425 0.583
5.10 1.373 0.452 1.397 0.492 1.423 0.544 1.453 0.618
5.20 1.397 0.478 1.422 0.519 1.450 0.574 1.482 0.653
5.30 1.421 0.503 1.448 0.547 1.477 0.605 1.511 0.688
5.40 1.445 0.529 1.473 0.575 1.504 0.636 1.539 0.722
5.50 1.470 0.554 1.499 0.603 1.531 0.666 1.568 0.757
5.60 1.494 0.580 1.524 0.630 1.559 0.697 1.597 0.792
5.70 1.518 0.605 1.550 0.658 1.586 0.728 1.626 0.827
5.80 1.542 0.631 1.575 0.686 1.613 0.758 1.654 0.862
5.90 1.566 0.656 1.601 0.713 1.640 0.789 1.683 0.897
6.00 1.591 0.682 1.627 0.741 1.667 0.820 1.712 0.931
6.10 1.615 0.707 1.652 0.769 1.694 0.850 1.741 0.966
6.20 1.639 0.733 1.678 0.797 1.721 0.881 1.769 1.001
6.30 1.663 0.758 1.703 0.824 1.748 0.912 1.798 1.036
6.40 1.687 0.784 1.729 0.852 1.775 0.942 1.827 1.071
6.50 1.712 0.809 1.754 0.880 1.802 0.973 1.856 1.106
6.60 1.736 0.835 1.780 0.908 1.829 1.003 1.884 1.140
6.70 1.760 0.860 1.805 0.935 1.856 1.034 1.913 1.175
6.80 1.784 0.886 1.831 0.963 1.883 1.065 1.942 1.210
6.90 1.808 0.911 1.856 0.991 1.910 1.095 1.971 1.245
7.00 1.833 0.937 1.882 1.018 1.937 1.126 1.999 1.280
7.10 1.857 0.962 1.907 1.046 1.964 1.157 2.028 1.315
7.20 1.881 0.988 1.933 1.074 1.991 1.187 2.057 1.349
7.30 1.905 1.013 1.959 1.102 2.018 1.218 2.085 1.384
7.40 1.929 1.039 1.984 1.129 2.045 1.249 2.114 1.419
7.50 1.954 1.064 2.010 1.157 2.072 1.279 2.143 1.454
7.60 1.978 1.090 2.035 1.185 2.099 1.310 2.172 1.489
7.70 2.002 1.115 2.061 1.212 2.126 1.341 2.200 1.524

You might also like