0% found this document useful (0 votes)
285 views1 page

AN-SCI02 Wi-Fi User Manual PDF

This document provides instructions for connecting a Wi-Fi datalogger to a wireless router using an app. It includes the following steps: 1. Find the interface code for the datalogger model and match it to the corresponding interface icon. 2. Complete the installation according to the interface code by following the steps in the icon. 3. Confirm the datalogger's LED light is normal by checking that four LEDs remain lit after installation.

Uploaded by

bima kurniawan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
285 views1 page

AN-SCI02 Wi-Fi User Manual PDF

This document provides instructions for connecting a Wi-Fi datalogger to a wireless router using an app. It includes the following steps: 1. Find the interface code for the datalogger model and match it to the corresponding interface icon. 2. Complete the installation according to the interface code by following the steps in the icon. 3. Confirm the datalogger's LED light is normal by checking that four LEDs remain lit after installation.

Uploaded by

bima kurniawan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

2.

Wireless Router Connection

Wi-Fi PlugII 2.1 Download APP


Quick Installation Guideline
① Scan the QR Code on the right
side and download the APP.

iOS Android

1. Installation

Datalogger Model Interface Code Interface Icon Connected WLAN


2.2 Connect Wi-Fi Datalogger
① Find the corresponding Wi-Fi PlugII - 01/11(Method 1) SmartESS Disconnect
WLAN

interface code on the right table,


Wi-Fi PlugII - 04(Method 2)
❶ Please enter user name Please choose a Wi-Fi and connect.
CHOOSE A NETWORK...

2018LA
① Open the APP, tap the Wi-Fi Config
button to enter this page.
according to the model of the Please enter password
W2015
PASSWORD

datalogger. Keep password


Eybond2015
12345678 ② Tap the Connect Wi-Fi Datalogger

Eybond 2.4g

② Based on the corresponding icon, Wi-Fi PlugII - 02/10 Connect


button on the Connected page
Login W0016250020617

finish the installation according to Wi-Fi Datalogger


Wifi-test
(Android phone has no need of this
Wi-Fi Config
the interface code. Wifi111 step) .
③ Confirm the status of the LED light
Register
③ Select the same number of Wi-Fi
(After step2.3, when 4 LED light
Wi-Fi PlugII - 07
❸ DEMO> PlugII PN to connect.
keep on, showing the normal
Network Setting Network Diagnose
(Initial Password: 12345678)
working status). Wi-Fi PlugII - 03/05/06/08/12/13


Method 1 : Connected Network Settings
① Connect the 4PIN power cable of the Wi-Fi 2.3 Network Setting Please connect to the wireless router

PlugII to the inverter. W0016250020617 Router Name:

② Fasten the Wi-Fi PlugII to the inverter with ① After the connection completes, tap the Please choose a Wi-Fi and connect. Password:

the screw. Network Setting button. Confirm password:

② According to the prompts, type in the


Method 2 : information to finish the network setting. Connect
Wi-Fi Datalogger
VRS
TEN
MCC
RWP

① Connect the 2 PIN green interface of the ③ Reconnect the Wi-Fi or Cellular Data
Wi-Fi PlugII to the RS-485 terminal of which can surf the Internet instead of the
the inverter. Wi-Fi connected by step 2.2. Setting

② Connect the 5PIN power cable of the Wi-Fi Network Setting Network Diagnose

PlugII to the inverter.


③ Fasten the Wi-Fi PlugII to the inverter
with the screw.

3. Create Account And Plant

❷ SmartESS User Name


Register

① Align the 4-hole aviation plug of the Password


3.1 Create Account
Wi-Fi PlugII with the inverter and Please enter user name
Confirm Password
plug it in. Please enter password

Keep password
E-mail ① Open the APP, tap the Register button
② Tighten the nut of the Wi-Fi PlugII to PWR
CCM
NET
SRV

Phone Number Datalogger PN to enter this page.


the inverter. Login

Wi-Fi Config
PN
② According to the prompts, type in the
information to create an account.
Register

Demo> Register

新建电站
Create Plant
新建电站
Location of the plant Create Plants

❸ 3.2 Create Plant Please enter the location of the plant Plant Name*

Please enter plant’s name

Plant description

① Align the RJ-45 crystal head of the Wi-Fi ① Login the account and click Please input the description the plant

PlugII with the inverter and insert it in tightly. the list button on the bottom
② Fasten the Wi-Fi PlugII to the inverter with of the home page. You don't have Plant picture

a plant yet.
VRS
TEN
MCC
RWP

the screw. ② Tap the “+” button on the top- Plant picture

right corner of the list page


③ According to the prompts, type
Finish
in the information to finish Location:Baoan,Shenzhen

creating plant. OVERVIEW LIST MAP ME


Confirm Cancel

Note: One account can create multiple plants and one plant can add multiple dataloggers. If you only have one
datalogger, you could ignore this step.

❹ 3.3 Add Multiple Dataloggers


Add Datalogger
Device Add Datalogger
Plant Name Device 1
① Tap the new plant you just created,
Current power: 55.6kW

① Align the serial port of the Wi-Fi PlugII


PN:123456789
Daily generation: 141.6kWh
Current power : 125kW
Daily income: ¥158.2
Total generation: 364.3kWh Daily generation : 125kWh Datalogger PN
with the inverter and plug it in tightly. and enter its home page.
② Fasten the Wi-Fi PlugII to the inverter PWR
CCM
NET
SRV
② Click the Device button on the
with the screw. bottom of the home page.
③ Tap the “+” button at the top-right
corner to add the datalogger.
Input the Datalogger PN
④ Scan the datalogger PN on the
Wi-Fi PlugII, or input it manually.
OVERVIEW LIST MAP ME Info Data
Devices Alarm
Map

You might also like