FSE/FSE(w) 100ºC

Electrical heating cable for frost FREEZ S TOP EXTRA

protection or temperature maintenance. Self-Regulating Heating Cable

Automatically adjusts heat output in response Full range of controls and accessories.
to increasing or decreasing pipe temperature.
Approved for use in non-hazardous,
Can be cut-to-length with no wastage. hazardous and corrosive environments.
Will not overheat or burnout, even when Available up to 277VAC.
overlapped.

DESCRIPTION
Buswires.

FREEZSTOP EXTRA is an industrial grade, self-regulating

heating cable that can be used for freeze protection
or temperature maintenance to 100ºC. Inherently temperature-safe
self-regulating matrix.
It can be cut-to-length on site and exact piping
lengths can be matched without any complicated
design considerations.
FREEZSTOP EXTRA is approved for use in non-hazardous,
hazardous and corrosive environments to world wide
standards. Thermoplastic
electrical insulation.
Its self-regulating characteristics improve safety
and ­reliability. FREEZSTOP EXTRA will not overheat
or burnout, even when ­overlapped upon itself. Its
power output is self-regulated in response to the
pipe temperature.
Continuous
The installation of FREEZSTOP EXTRA is quick and simple conductive
and requires no special skills or tools. Termination, covering of
splicing and power connection components are all metal braid.
provided in convenient kits. (-C)

INHERENTLY TEMPERATURE-SAFE

“ The inherent ability to self-regulate at a Thermoplastic or

temperature level below the maximum product fluoropolymer
rating and withstand temperature of the insulating outer jacket.
materials, without the need for temperature
control.”
Similar competitor self-regulating products
are typically limited to a maximum energised
FSE FSEw
temperature, typically 65ºC at which point, their
retained power output prevent the cable from self-
regulating at its own limiting temperatures. All such
products require temperature control to ensure 0518
their own temperature safety.

The
SRDS0103 (181020181)

Heat Tracing Authority TM

 SPECIFICATION
MAXIMUM CONTINUOUS EXPOSURE MAXIMUM LENGTH (m) vs. CIRCUIT BREAKER SIZE:
TEMPERATURE (Power ON): 100ºC (212ºF) The following circuit details relate specifically to the
trace heating of pipework and equipment. For any
MAXIMUM PERMISSABLE EXPOSURE other application consult Heat Trace.
TEMPERATURE (Power OFF): 100ºC (212ºF)
Cat Start-up 230V
MINIMUM OPERATING Reference Temperature 6A 10A 16A 20A 25A
TEMPERATURE: -65ºC* (-85ºF)
17FSE 10ºC 46 76 120 148 -
MINIMUM INSTALLATION 0ºC 36 62 98 122 148
TEMPERATURE: -40ºC (-40ºF)
-20ºC 24 42 66 82 102
POWER SUPPLY: 12 - 277V AC -40ºC 16 28 44 56 68
TEMPERATURE CLASSIFICATION: 31FSE 10ºC 32 52 82 104 110
up to 45W/m @ nom voltage - T4 (135ºC)
0ºC 26 42 68 84 106
>45W/m @ nom 230V powered to 277V - T3 (200ºC)
-20ºC 16 28 46 56 70
MAXIMUM RESISTANCE -40ºC 12 18 30 38 48
OF PROTECTIVE BRAIDING: 18.2 Ohm/km
45FSEw 10ºC 24 38 62 76 96
INGRESS PROTECTION: IP67 0ºC 20 32 50 64 80
WEIGHTS & DIMENSIONS: -20ºC 12 22 34 42 52
Type Dimensions Weight Min Bend Gland
-40ºC 8 14 22 28 34
Ref (mm) +/-0.5 kg/100m radius Size
60FSEw 10ºC 20 35 52 66 82
FSE 10.5 x 3.75 5.7 25mm M20 0ºC 16 28 44 56 70
FSE..C 11.5 x 4.75 9.5 30mm M20
FSE..CT 12.7 x 5.95 11.8 35mm M20 -20ºC 12 20 32 40 50
FSE..CF 12.7 x 5.95 12.6 35mm M20 -40ºC 8 14 22 28 34
FSEw 13.2 x 4.3 8.7 25mm M20 For use with Type C circuit breakers to IEC 60898
FSEw..C 14.2 x 5.3 12.9 30mm M20
FSEw..CT 15.4 x 6.5 15.7 40mm M25 THERMAL RATINGS:
FSEw..CF 15.4 x 6.5 16.6 40mm M25 Nominal output at 115V or 230V when FSE is installed
on thermally insulated carbon steel pipes.
APPROVAL DETAILS:
ATEX - FSE: Sira 02ATEX3076 70

FSEw: Sira 12ATEX3114 65 60 FSEw

IECEx - FSE: SIR 11.0126 60
FSEw: SIR 11.0127 55
DNV-GL - TAE00002KA
50
EAC* - TC RU C-GB.МЮ62.B.06041 45 FSEw
45
W/m
ORDERING INFORMATION: 40
Options 35
31 FSE
FSE(w)-C Continuous conductive covering of metal 30
braid. Mechanical protection/earth path.
25
FSE(w)-CT Thermoplastic outer jacket over a metal
20
braid provides additional protection. 17 FSE
FSE(w)-CF Fluoropolymer outer jacket over a metal 15
braid provides protection where corrosive 10
chemical solutions or vapours may be 5
present.
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
Example: 45 FSEw 2 - C T
Pipe Temperature (ºC)

Output 45W/m at 10ºC

FURTHER INFORMATION:
FREEZSTOP EXTRA WIDE
Please consult the appropriate termination
Supply Voltage 220 - 277V AC
instructions and the Heat Trace Design, Installation &
Metal Braid Maintenance Manual (HTDIMM 010) for further details.
Thermoplastic Outerjacket

Heat Trace Ltd, Mere’s Edge, Chester Road, Helsby, Frodsham, Cheshire, WA6 0DJ, England.
SRDS0103 (181020181)

Tel: +44 (0)1928 726451 Fax: +44 (0)1928 727846

www.heat-trace.com email: [email protected]
The information given herein, including drawings, illustrations and schematics (which are intended for illustration purposes only),is believed to be reliable. However, Heat Trace Ltd makes no warranties
as to its accuracy or completeness and disclaims any liability in connection with its use. Users of Heat Trace Ltd products should make their own evaluation to determine the suitability of each such
product for specific applications. In no way will Heat Trace Ltd be liable for any damages arising out of the misuse, resale or use of the product.