With a mission to serve the process industry by

providing quality products, incorporating the latest

technology in design and manufacturing, MIL
offers a product package of control valves for
applications ranging from superheated steam, feed
water, chemicals, petroleum...extending to nuclear
and cryogenic fluids. The standard range covers
sizes from 15NB to 500NB and pressure ratings
ranging from ANSI 150# to ANSI 2500#. MIL also
offers products with design features and materials
tailored to specific needs.

MIL owes its solid foundations to an innovative

design facility, which employs stringent and high
quality work procedures. These include CAD
workstations for design optimisation, design
procedures in tune with international codes and
standards, stress analysis of principal components based on finite element analysis, heat transfer calculations, sound
spectrum analysis and various development efforts aimed at upgrading, value engineering and standardisation. In
working towards accomplishing the preferred partner status for control valve
Thermal/Captive power
requirements we employ sophisticated testing equipment to ensure
highest quality of the final product. Sophisticated testing equipment Oil & natural gas,
which include helium mass spectrometers, dynamic response test petroleum
setup, cryogenic test setup etc. ensure highest quality of the final
Petrochemical, tyre &
product. rubber, textile & rayon
ISO 9001 certification, awarded by IRQS in 1995 warrants product Fertiliser, chemical,
component traceability and consistency of product quality. We are pharmaceutical
committed to excellence through continuous quality
Nuclear power, aerospace
improvement. research, cryogenic
MIL supplies control valves for all core sector requirements and is Metallurgy, iron & steel
particularly well known for its dominance in the thermal, fertiliser, petrochemical and refinery
industries. We have been continuously widening the product range to cater to the various applications demanded
by process industries.
Globe Control Valves
MIL 10000 DOUBLE PORTED TOP & BOTTOM GUIDED CONTROL VALVES
Features

Top & Bottom Guiding: Provides adequate support against side loads

High allowable pressure drops: These valves incorporate simplest form of balanced
construction and provide high pressure drop capability with standard actuators.

High capacity with low pressure recovery: Flow capacity is at top levels for contemporary
double ported valves and is attained with very little pressure recovery as indicated by the
high C factors, especially for V-Port plug design.
f

Invertible bodies & plugs: The same direct spring diaphragm actuator can provide both
air-to-close & air-to-open actions.

Special Options: For moderate applications bubble tight leak tightness of Class VI is
achieved, using adjustable, soft seated plugs.

Available Sizes & Rating

¾” to 12”: ANSI 150# to ANSI 1500#, 14” & 16”: ANSI 150# to ANSI 600#
Seat Leakage Class (as per ANSI/FCI 70.2)
Standard: Class II Optional: Class IV & Class VI

1
MIL 21000 TOP GUIDED SINGLE PORTED CONTROL VALVES
Features
Heavy, Rugged Top Guiding: Heavy top plug guiding provides sufficient support to
ensure plug stability.
Low noise / Anti-cavitation trim: By simply replacing the conventional plug with
Lo-dB design, noise attenuation / cavitation control is achieved.
Tight shut-off: Class IV leakage is standard, Optional constructions meet Class V &
Class VI leakage standards.
Threaded or Quick-change trim: Threaded & clamped seat rings can be provided.
Special Options: Bellow sealed bonnet for emission control, Multi-stage designs
available for severe applications.
Available Sizes & Rating
½” to 2” : ANSI 150# to ANSI 2500# 3” to 10”: ANSI 150# to ANSI 600#
Seat Leakage Class (as per ANSI/FCI 70.2)
Standard: Class IV Optional: Class V & Class VI

MIL 25000 TRIP VALVES

Features
Streamlined body design: Unique construction
of this value engineered product provides
compactness and the streamlined design provides increased flow capacity.
No-cavity design: Elimination of cavities in the flow path provides efficient flow
with low pressure drop.
Quick operating time: With addition of suitable accessories, operating times even
less than one second can be achieved.
Available Size & Rating
1”: ANSI 150# to ANSI 300#
Seat Leakage Class (as per ANSI/FCI 70.2)
Standard: Class IV Optional: Class V & Class VI

MIL 26000 STEM GUIDED SPLIT BODY CONTROL VALVES

Features
Modular construction: Two piece body design & a clamped
seat ring located between the body halves allows ‘inline’
trim replacement especially for corrosive service applications.
Smooth internal flow passages: 'No-pocket' design prevents
material buildup.
Stem guiding: Guiding surface is removed from the flow
stream and prevents buildup / sedimentation of material
behind conventional bushing.
Special Options: Soft seat design
Available Sizes & Rating
¾” to 6”: ANSI 150# to ANSI 600#
Seat Leakage Class (as per ANSI/FCI 70.2)
Standard: Class IV
Optional: Class V & Class VI

2
 MIL 29000 MICROPAK VALVES
Features
High performance control for low flow applications: These valves
are designed to handle a variety of low flow applications with
pressures as high as 250 bar. Cage guided design ensures plug
stability.
High Cv ratio: Cv ratio of 500:1 provides wider application range.
Integral actuator & positioner: Force multiplying actuator with
rolling diaphragm & buit-in valve positioner provides compactness.
High performance materials: The valve design has integral body &
bonnet of forged stainless steel and solid stellite valve plug.
Material of construction has been selected for high performance &
long life when handling high pressure drops & corrosive fluids.
Field Reversibility: Air action can be reversed by merely relocating
the pivot pin.
Available Size & Rating
1”: ANSI 600# to ANSI 1500#
Seat Leakage Class (as per ANSI/FCI 70.2)
Standard: Class IV Optional: Class V

MIL 41000 HEAVY DUTY CAGE GUIDED CONTROL VALVES

Features
Higher allowable pressure drops: Cage guided valves provide
exceptional performance over a wide range of pressure drops typical
of severe services. These valves also handle a vast majority of all shut-
off pressures with standard pneumatic spring diaphragm actuators.
High capacity with low pressure recovery: Flow capacity is at top levels
for contemporary cage guided valves and is attained with very little
pressure recovery as indicated by the high C factors, which minimises
f
possibility of cavitation in liquid service.
High performance material is standard: Material specified as standard
has been selected to provide trouble free operation in services with
high pressure drops & extreme temperatures.
Tight shut off valves: For lower sizes unbalanced design has Class V
leakage. For higher sizes, the exceptional single seated leak tightness
of Class V is achieved by the specially engineered options viz. 1.
Auxiliary shut-off pilot plug : The pilot plug closes the balancing holes
located in the main plug in shut-off condition. 2. Self energised seal
rings : Pressure energised seal ring pressing against walls of the cage &
plug arrests leakage past the seal ring.
Lo-dB / Anti-cavitation cages: Noise attenuation & cavitation control
is achieved by replacing conventional cages with Lo-dB cages.
Special Options: Double cage design, Two stage design with diffuser
seat ring, Multi-stage design with concentric cages.
Available Sizes & Rating
¾” to 14”: ANSI 150# to ANSI 2500#
16” to 20”: ANSI 150# to ANSI 600#
Seat Leakage Class (as per ANSI/FCI 70.2)
Standard : Class III & Class IV Optional: Class V

3
MIL 50000 CRYOGENIC CONTROL VALVES
Features
Extended body construction: This ensures that stuffing box is as far away as
possible from the fluid flow area so as to prevent freezing of the packing.
Zig–Zag Flow path: Minimises body size to reduce heat in-leak thus preventing
loss of energy from the fluid.
Heavy guided extended tubular plug: The plug is guided heavily along the body
wall close to the seating area ensuring plug stability despite the extended plug.
Tubular construction again minimises heat in-leak.
Special Options: Vacuum jacketting, Bellow sealed bonnet.
Available Sizes & Rating
½” to 6”: ANSI 150# to ANSI 600#
Seat Leakage Class (as per ANSI/FCI 70.2)
Standard: Class IV Optional: Class V & Class VI

MIL 70000 SELF DRAINING ANGLE VALVES

Features
Self draining: These valves generally installed
in flow to close direction minimizes body erosion especially for slurry &
flashing service. Many angle valves are designed for specific purposes like
flashing hydrocarbon liquids involving severe operating conditions such as
high temperatures & pressures, choking etc.
Other features are similar to 21000 series viz. Heavy & Rugged Top
Guiding, Low noise trims, Tight shut-off, Threaded or Quick-change trims
etc.
Special Options: Venturi seat, Cage guided construction.
Available Sizes & Rating
¾” to 2”: ANSI 150# to ANSI 2500# 3” to 8”: ANSI 150# to ANSI 600#
Seat Leakage Class (as per ANSI/FCI 70.2)
Standard: Class IV Optional: Class V & Class VI

MIL 78000 ANTI-CAVITATION & LOW NOISE MULTI-STEP HIGH PRESSURE DROP CONTROL VALVES
Features
High allowable pressure drops: The special design provides control of high pressure
fluids without erosion, vibration & high noise levels associated with conventionally
designed control valves.
Adiabatic Flow with Friction: Reduces pressure much like pressure loss occurring in a
long pipe line.
Low pressure recovery: Minimises potential for cavitation of liquids & contributes
towards reduction of noise for all fluids.
Balanced trims: Available for sizes 2” and above allow much higher shut-off pressures
with conventional actuators.
Special Options: Soft seat construction with encapsulated inserts, Angle & Inline body
configurations.
Available Sizes & Rating
½” to 6”: ANSI 900# to ANSI 2500#
Seat Leakage Class (as per ANSI/FCI 70.2)
Standard: Class V Optional: Class VI

4
MIL 81000 THREE-WAY CONTROL VALVES
Features
Combining & Diverting: Separate designs available for combining & diverting
service.
Plug stability: Valves are designed to be installed with flow tending to open both
ports. The important advantage of this design is inherent plug stability.
Special Options: Soft seat construction
Available Sizes & Rating
¾” to 10”: ANSI 150# to ANSI 1500#
Seat Leakage Class (as per ANSI/FCI 70.2)
Standard: Class IV Optional: Class V & Class VI

MIL 500 SELF ACTUATED CONTROL VALVES

535-H
Features
Downstream
Regulators Downstream control: Model 535-H single ported design is used for moderate
applications upto 2” size. For severe applications & sizes above 2”, 525 series
526/525 double ported valves are used.
Upstream/ Upstream control: Model 526 double ported valves are available upto 4” size for
Downstream upstream control.
Regulators Compact Actuators: Special compact actuators having diaphragm material,
compatible with the fluid handled are used for the self regulating valves.
External impulse connection: Wetted parts in the actuator are the diaphragm &
diaphragm case alone, avoiding the need for frequent maintenance.
Available Sizes & Rating
¾” to 4”: ANSI 150# to ANSI 300#

SPECIAL VALVES
Custom built valves for specific applications.
Apart from the above standard product range we have developed valves to cater to various
special applications ranging from defence to seismically qualified nuclear valves and
cryogenic valves for aerospace propulsion application.

ADDITIONAL OPTIONS
· Bellow Sealed Bonnets NACE Compliance
Bottom Flanges Non-destructive Testing
Double Packing Other Flange Facings
Electrical / Piston actuators Special Materials
Extension / Finned Bonnets Oxygen service cleaning
Hand Operated valves Purge Connection
Live Loaded packing Steam Jacketting
Lubricator & Isolating valves Urea Application

5
NEW! Actuators & Accessories

Type 57/58 Pneumatic

Multi-Spring Actuators
MIL 77.4
AIR FILTER REGULATOR

MIL 776
AIR LOCK RELAY

MIL 37 MIL 38
New! DIRECT ACTUATOR REVERSE ACTUATOR

Type 67/68 Pneumatic

Piston Cyliner Actuators

MIL 7400 MIL 8013

PNEUMATIC VALVE POSITIONER ELECTRO-PNEUMATIC VALVE POSTIONER

MIL 400A for low strokes

MIL 400 X for std. strokes

MIL 400 MIL 496

ELECTRONIC POSITION TRANSMITTER ROTARY ELECTRIC LIMIT SWITCH