Scribd
Upload
218 views7 pages

2g Huawei Handover Algoritm

The document contains configuration commands for activating different handover algorithms on a Huawei mobile network. It activates algorithms for quick handovers, TA-based handovers, poor-quality handovers, interference handovers, load handovers, and more. It also configures parameters for each algorithm and sets flags to enable the various handover features.

Uploaded by

Sofian Harianto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
218 views7 pages

2g Huawei Handover Algoritm

The document contains configuration commands for activating different handover algorithms on a Huawei mobile network. It activates algorithms for quick handovers, TA-based handovers, poor-quality handovers, interference handovers, load handovers, and more. It also configures parameters for each algorithm and sets flags to enable the various handover features.

Uploaded by

Sofian Harianto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Example

//Activating HUAWEI I handover algorithm


SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1;
SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1;
SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1;
SET GCELLHOIUO: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1;
SET GCELLHOAD: IDTYPE=BYID, CELLID=0, HOTRYCNT=3;

//Activating the quick handover algorithm


MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, ISCHAINN
SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, QUICKHOEN=YES;
SET GCELLHOFAST: IDTYPE=BYID, CELLID=0, HOUPTRIGE=50, HODOWNTRIGE=50, MOVESPEEDTHRES=35, SCE
SET GCELLOTHEXT: IDTYPE=BYID, CELLID=0, FREQADJ=YES, DLFREQADJ=YES, FREQADJVALUE=36671;

//Activating the TA handover algorithm


SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, TAHOEN=YES;
SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, TALIMIT=125;
SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, SSTAPUNISH=40, TIMETAPUN

//Activating the bad quality handover algorithm


SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, BQHOEN=YES;
SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, DLQUALIMIT=55, ULQUALIMIT=
SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, SSBQPUNISH=63, TIMEBQPU

//Activating rapid level drop handover algorithm


SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, RXQCKFALLHOEN=YES, ULEDG
SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, FLTPARAA1=10, FLTPARAA2=10

//Activating the interference handover algorithm


SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, INTRACELLHOEN=YES, INTERF
SET GCELLHOAD: IDTYPE=BYID, CELLID=0, BANTIME=20;
MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVH
SET GCELLAMRQUL: IDTYPE=BYID, CELLID=0 ,RXQUAL1=35;

//Activating the no downlink measurement report handover algorithm


SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, NODLMRHOEN=YES, NODLMRH
SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, DATAQUAFLTLEN=4, SIGQUAF

//Activating the enhanced dual-band network handover algorithm


MOD GCELL: IDTYPE=BYID, CELLID=0, IUOTP=EDB_cell, CELLINEXTP=Inner, DBLFREQADJIDTYPE=BYID, DBLFRE
SET GCELLHOEDBPARA: IDTYPE=BYID, CELLID=0, OUTASSOPTEN=YES;

//Activating the load handover algorithm


SET GCELLHOBASIC: IDTYPE=BYID, HOCTRLSWITCH=HOALGORITHM1, LoadHoEn=YES, DLEDGETHRES=20, HOT
SET GCELLHOAD: IDTYPE=BYID, CELLID=0, SYSFLOWLEV=10, TRIGTHRES=90, LoadAccThres=80, LOADOFFSET=
MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVH

//Activating the edge handover algorithm


SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, FRINGEHOEN=YES, ULEDGETH
MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVH

//Activating the fast-moving micro cell handover algorithm


SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, LAYER=3;
SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, QCKMVHOEN=YES, HOTHRES=
SET GCELLHOAD: IDTYPE=BYID, CELLID=0, QCKSTATCNT=3, QCKTRUECNT=2, QCKTIMETH=15, SPEEDPUNISH=3
MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVH

//Activating the inter-layer handover algorithm


SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, LEVHOEN=YES, HOTHRES=25
SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, LAYER=3, PRIOR=PRIOR-3;
MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVH

//Activating the PBGT handover algorithm


SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, PBGTHOEN=YES;
SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, LAYER=3, PRIOR=PRIOR-3;
MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVH
MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, SRCHOCT

//Activating the AMR handover algorithm


SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, INTRACELLFHHOEN=YES, INFH
SET GTRXDEV: TRXID=0, TCHAJFLAG=YES;
SET GCELLCCACCESS: IDTYPE=BYID, CELLID=0, VOICEVER=FULL_RATE_VER1-0&FULL_RATE_VER2-0&FULL_RATE
SET BSCBASIC: AVer=GSM_PHASE_2;
SET GCELLCHMGAD: IDTYPE=BYID, CELLID=0, AMRTCHHPRIORALLOW=ON, AMRTCHHPRIORLOAD=55;

//Activating the SDCCH handover algorithm


SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, INTRACELLFHHOEN=YES, INFH
SET GCELLHOCTRL: IDTYPE=BYID, CELLID=0, INRBSCSDHOEN=YES;
=HANDOVERNCELL, ISCHAINNCELL=YES, CHAINNCELLTYPE=QUICK_HO_NCELL_TYPE_A;
QUICKHOEN=YES;
, MOVESPEEDTHRES=35, SCELLFILTER=4, NCELLFILTER=4, IGNOREMRNUM=1, TIMEPUNISH=10, HOPUNISHVALUE=63, HO
EQADJVALUE=36671;

TAHOEN=YES;
ALIMIT=125;
SSTAPUNISH=40, TIMETAPUNISH=10;

BQHOEN=YES;
LQUALIMIT=55, ULQUALIMIT=60;
SSBQPUNISH=63, TIMEBQPUNISH=10;

RXQCKFALLHOEN=YES, ULEDGETHRES=10;
LTPARAA1=10, FLTPARAA2=10, FLTPARAA3=10, FLTPARAA4=10, FLTPARAA5=10, FLTPARAA6=10, FLTPARAA7=10, FLTPARAA

INTRACELLHOEN=YES, INTERFHOEN=YES, HOTHRES=2;

=HANDOVERNCELL, INTELEVHOHYST=67;

ODLMRHOEN=YES, NODLMRHOQUALLIMIT=50, NODLMRHOALLOWLIMIT=8, NODLMRHOSTATTIME=1, NODLMRHOLASTTIME


DATAQUAFLTLEN=4, SIGQUAFLTLEN=2;

REQADJIDTYPE=BYID, DBLFREQADJCID=1;

YES, DLEDGETHRES=20, HOTHRES=25;


adAccThres=80, LOADOFFSET=25, LOADHOPERIOD=10, LOADHOSTEP=5;
=HANDOVERNCELL, INTELEVHOHYST=67;

FRINGEHOEN=YES, ULEDGETHRES=10, DLEDGETHRES=20, EDGESTAT1=6, EDGELAST1=4;


=HANDOVERNCELL, INTELEVHOHYST=67;

QCKMVHOEN=YES, HOTHRES=25;
KTIMETH=15, SPEEDPUNISH=30, SPEEDPUNISHT=4
=HANDOVERNCELL, INTELEVHOHYST=67;

LEVHOEN=YES, HOTHRES=25;

=HANDOVERNCELL, INTELEVHOHYST=67, LEVSTAT=6, LEVLAST=4;

PBGTHOEN=YES;

=HANDOVERNCELL, INTELEVHOHYST=67, PBGTSTAT=6, PBGTLAST=4;


=HANDOVERNCELL, SRCHOCTRLSWITCH=HOALGORITHM1, PBGTMARGIN=68, PBGTSTAT=6, PBGTLAST=4;

INTRACELLFHHOEN=YES, INFHHOSTAT=10, INFHHOLAST=8, INHOF2HTH=25, INHOH2FTH=12;

ULL_RATE_VER2-0&FULL_RATE_VER3-1&HALF_RATE_VER1-1&HALF_RATE_VER2-0&HALF_RATE_VER3-1&FULL_RATE_VER5-0;

HHPRIORLOAD=55;

INTRACELLFHHOEN=YES, INFHHOSTAT=10, INFHHOLAST=8, INHOF2HTH=25, INHOH2FTH=12;


10, HOPUNISHVALUE=63, HOOFFSET=68, MSLEVSTRQPBGT=NO, HODIRFORECASTEN=YES, HODIRSTATIME=3, HODIRLASTT

0, FLTPARAA7=10, FLTPARAA8=10, FLTPARAB=0;

IME=1, NODLMRHOLASTTIME=1;
BGTLAST=4;

VER3-1&FULL_RATE_VER5-0;
ODIRSTATIME=3, HODIRLASTTIME=2, AFCHOSTATTIME=4, AFCHOLASTTIME=3;

You might also like