TK3212

Download as pdf or txt
Download as pdf or txt
You are on page 1of 47

UHF FM TRANSCEIVER

TK-3212/3217
SERVICE MANUAL
© 2005-1 PRINTED IN JAPAN
B51-8716-00 (S) 971

CONTENTS
GENERAL ............................................................. 2
Antenna SYSTEM SET-UP ................................................. 2
(T90-1039-15): TK-3212(K,M)
(T90-1040-15): TK-3212(K2,M2)
OPERATING FEATURES ..................................... 3
(T90-0798-25): TK-3217(M) REALIGNMENT .................................................... 4
DISASSEMBLY FOR REPAIR .............................. 9
CIRCUIT DESCRIPTION ..................................... 12
Knob (CH selector) SEMICONDUCTOR DATA ................................. 16
(K29-9345-04) COMPONENTS DESCRIPTION ......................... 17
TERMINAL FUNCTION ...................................... 17
Knob (Volume) PARTS LIST ........................................................ 18
(K29-9309-03) EXPLODED VIEW ............................................... 24
PACKING ............................................................ 25
ADJUSTMENT ................................................... 26
Cabinet assy
PC BOARD
(A02-3894-13) TX-RX UNIT (X57-7130-XX) ......................... 32
SCHEMATIC DIAGRAM ..................................... 36
BLOCK DIAGRAM .............................................. 40
LEVEL DIAGRAM ............................................... 42
KSC-31 / KNB-29N / KBH-10 ............................ 43
Key top SPECIFICATIONS ............................ BACK COVER
Knob (PTT) (K29-9346-02)
(K29-9308-13)

Button Knob
(Side1/Side2)
(K29-9307-13)

Photo is TK-3212. This product uses Lead Free solder


TK-3212/3217
GENERAL / SYSTEM SET-UP
INTRODUCTION PERSONAL SAFETY
SCOPE OF THIS MANUAL The following precautions are recommended for personal
This manual is intended for use by experienced technicians safety:
familiar with similar types of commercial grade ● DO NOT transmit until all RF connectors are verified secure

communications equipment. It contains all required service and any open connectors are properly terminated.
information for the equipment and is current as of the ● SHUT OFF and DO NOT operate this equipment near

publication date. Changes which may occur after publication electrical blasting caps or in an explosive atmosphere.
are covered by either Service Bulletins or Manual Revisions. ● This equipment should be serviced by a qualified technician only.

These are issued as required.


SERVICE
ORDERING REPLACEMENT PARTS This transceiver is designed for easy servicing. Refer to
When ordering replacement parts or equipment information, the schematic diagrams, printed circuit board views, and
the full part identification number should be included. This alignment procedures contained within.
applies to all parts, components, kits, or chassis. If the part
number is not known, include the chassis or kit number of
which it is a part, and a sufficient description of the required
component for proper identification.

Unit
Model TX-RX Unit Frequency range Remarks
& destination

TK-3212 K,M X57-7130-10 450~490MHz

K2, IF1 : 38.85MHz


TK-3212 X57-7130-11 470~512MHz
M2 LOC : 38.4MHz

TK-3217 M X57-7130-21 440~480MHz

SYSTEM SET-UP

Merchandise received

License and frequency allocated by FCC


Frequency range (MHz) RF power Type
TX/RX 450~490 4.0W TK-3212 (K,M)
Choose the type of transceiver
TX/RX 470~512 4.0W TK-3212 (K2,M2)
TX/RX 440~480 4.0W TK-3217 (M)
Transceiver programming
A personal computer (IBM PC or compatible), programming
interface (KPG-22), and programming software (KPG-100D)
are required for programming.
(The frequency, TX power HI/LOW, and signaling data are programmed
for the transceiver.)

YES KRA-23 or KRA-27


Are you using the optional antenna?
Optional antenna
NO

YES KMC-17 or KMC-21


Are you using the speaker microphone?
Speaker microphone
NO
(Option)

Delivery

2
TK-3212/3217
OPERATING FEATURES
@ A key
1. Controls and Functions
Press to activate its programmable function. The default
1 2 3 5
setting is None (no function).
# <B key
Press to activate its programmable function. The default
setting is Channel Down.
$ C> key
1

4 6
Press to activate its programmable function. The default
setting is Channel Up.
% Speaker/ Microphone jacks
Microphone
Connect an optional speaker/ microphone or headset here.
Otherwise, keep the supplied cap in place.
11
10 12 2. Display
7
13
15
14
8
9

Speaker

Indicator Description
Appears when the key programmed as
Monitor or Squelch Off is pressed.
1 Antenna connector Appears when you receive a Code Squelch
Connect an antenna here. call or transmit using Code Squelch.
2 Selector Appears while using the Talk Around
Your dealer can program the selector as either Zone Up/ function.
Down (default setting) or Channel Up/Down. Rotate the The selected zone is added to the
selector to select a zone or channel. scanning sequence.
3 Power switch/ Volume control Appears while scanning.
Turn clockwise to switch ON the transceiver. Rotate to
adjust the volume. Turn counterclockwise fully to switch Appears while using the VOX function
OFF the transceiver.
4 Transmit/ Busy/ Call indicator Appears when a message is stored in the
This LED lights red while transmitting and green while re- transceiver stack memory. Appears and
ceiving a call. The LED flashes orange while receiving an blinks when a new message has arrived.
encoded call (i.e. Code Squelch, etc.) and red when the The selected channel is set as a Priority
battery power is low while transmitting. channel.
5 Release Latch Appears while using low transmit power
Press the release latch to unlock and remove the battery on the selected channel.
pack. The selected channel is added to the
6 Safety Catch scanning sequence.
Lock this catch to avoid accidentally pressing the release Appears when the Scrambler function has
latch and removing the battery pack. been activated.
7 PTT (Push-to-Talk) switch Displays the current battery status (full/
Press this switch, then speak into the microphone to call a sufficent/ low/ requires charging).
station. Displays the currently selected zone and
8 Side 1 key channel number or the channel name. Also
Press to activate its programmable function. The default displays FleetSync messages.
setting is Squelch Off Momentary.
9 Side 2 key
Press to activate its programmable function. The default
setting is Lamp.
0 Display
Refer to the display.
! S key
Press to activate its programmable function. The default
setting is None (no function).

3
TK-3212/3217
REALIGNMENT

REALIGNMENT When data is transmitting from the transceiver, the red


LED lights.
1. Modes When data is received by the transceiver, the green LED
lights.
User mode
Data programming Notes:
PC mode mode
• The data stored in the personal computer must match the
Clone mode PC test mode PC tuning mode model type when it is written into the EEPROM.
• Change the TK-3212/3217 to PC mode, then attach the
Self programming mode
interface cable.
Firmware version information
3-3. KPG-22 description
Mode Function (PC programming interface cable: Option)
User mode For normal use. The KPG-22 is required to interface the TK-3212/3217 with
PC mode Used for communication between the the computer. It has a circuit in its D-subconnector (25-pin)
transceiver and PC (IBM compatible). case that converts the RS-232C logic level to the TTL level.
Data programming Used to read and write frequency data The KPG-22 connects the SP/MIC connector of the TK-3212/
mode and other features to and from the 3217 to the computer’s RS-232C serial port.
transceiver.
3-4. Programming software description
PC test mode Used to check the transceiver using
KPG-100D is the programming software for TK-3212/3217
the PC.
supplied on a CD-ROM. This software runs under Windows
This feature is included in the FPU.
98, ME, Windows 2000 or XP on an IBM-PC or compatible
Clone mode Used to transfer programming data
machine.
from one transceiver to another.
The data can be input to or read from TK-3212/3217 and
Self programming You can program the frequency,
edited on the screen. The programmed or edited data can be
mode signaling and other functions using
printed out. It is also possible to tune the transceiver.
only the transceiver.
Firmware version Used to confirm the internal firmware IBM-PC
information version.
KPG-22

2. How to Enter Each Mode


Mode Operation Gray +
Gray/Black – } SP
User mode Power ON 1.5D-XV Lead wire +
PC mode Received commands from PC
KPG-100D
1.5D-XV Shield wire – } MIC
Clone mode [<B]+Power ON (Two seconds) Tuning cable
RF Power meter
(E30-3216-05)
Self programming mode [S]+Power ON (Two seconds) or SSG
Firmware version [Side1]+[Side2]+Power ON
information (Two seconds)

3. PC Mode
3-1. Preface
The TK-3212/3217 transceivers are programmed using a Fig. 1
personal computer, a programming interface (KPG-22) and
programming software (KPG-100D).
The programming software can be used with an IBM PC 4. Clone Mode
or compatible. Figure 1 shows the setup of an IBM PC for 4-1. Outline
programming. "Clone Mode" copies the transceiver data to another
transceiver.
3-2. Connection procedure The dealer can copy the transceiver data to another
1. Connect the TK-3212/3217 to the personal computer with transceiver even without the use of a personal computer.
the interface cable.
2. When the POWER is switched on, user mode can be 4-2. Example
entered immediately. When the PC sends a command, The transceiver can copy the programming data to one or
the transceiver enters PC mode. In the PC mode, more transceivers via RF communication.
"PROGRAM" is displayed on the LCD. The clone master and clone slave/s must be in Clone mode.
4
TK-3212/3217
REALIGNMENT
4-3. Operation Cloning Frequency Table
1. To switch the clone slave/s to Clone mode, press and hold MODEL TK-3212 TK-3217
the [<B] key while turning the transceiver power ON. Type K, M K2, M2 M
2. Wait for 2 seconds. “CLONE” appears on the LCD, followed Operating
by “FRQTBL 1”. Clone Frequency
450~490 470~512 440~480
3. Select a channel table number using the [Selector] knob. Frequency (MHz)
4. To switch the clone master to Clone mode, press and hold Table
the [<B] key while turning the transceiver power ON. 1 450.000 470.000 440.000
2 452.000 472.000 442.000
5. Wait for 2 seconds. “CLONE” appears on the LCD, followed
3 454.000 474.000 446.000
by “FRQTBL 1”.
4 456.000 476.000 448.000
6. Select the same channel table number as the clone slave/s. 5 458.000 478.000 450.000
7. Press the [S] key on the clone master to begin data 6 460.000 480.000 452.000
transmission. When the clone slave starts to receive data, 7 462.000 482.000 454.000
the green LED will light and “CLONING” will appear on 8 464.000 484.000 456.000
the LCD. The master unit will display “MASTER”. 9 466.000 486.000 458.000
8. When the clone master finishes sending data, a 10 468.000 488.000 460.000
“confirmation” tone will sound and “COMPLETE” will 11 470.000 490.000 462.000
appear on the LCD. If data transmission failed while cloning, 12 472.000 492.000 464.000
the Slave unit will produced an error tone and “CLONE 13 474.000 494.000 466.000
14 476.000 496.000 468.000
NG” will appear on the LCD.
15 478.000 498.000 470.000
9. If the cloning fails, no data will be available in the Slave unit
16 480.000 500.000 472.000
when it is returned to User mode. 17 482.000 502.000 474.000
10.When the cloning is successful, the Slave unit's "Scan" and 18 484.000 504.000 476.000
"Key lock" functions will return to their default values (Scan 19 486.000 506.000 478.000
= OFF, Key lock = OFF). 20 488.000 508.000 480.000
11.The master will remain in clone mode after cloning. The
slave unit will return to user mode after a successful cloning.
4-4. Adding the Data Password
Notes: If the Data password is set to the transceiver, you must
• The dealer can clone data to two or more transceivers by enter the password to activate a clone mode. The maximum
repeating the above procedures. length of the password is 6 digits.
• If the transceivers Clone Mode is configured as "Disabled", The following describes how to enter the password.
the transceiver cannot enter Clone mode.
• The table shown below will cover the frequency tables used 1. Press and hold the [S] key for 2 seconds while turning the
for wireless cloning. transceiver power on.
• Clone mode cannot be entered in battery low state. 2. “CLN.LOCK.R”(When the Read authorization password is
• A unit cannot be a "Master Unit" if it is unprogrammed. If set to the transceiver.) / “CLN.LOCK.W” (When the
the [S] key is pressed, an "error" tone will sound. Overwrite password is set to the transceiver.) is displayed
• Once a unit is set to be the Master, it cannot be a slave on the LCD.
after the data has been transmitted. This protects the data 3. If the [selector] knob is rotated while “CLN.LOCK.R”/
in the Master unit. “CLN.LOCK.W” is displayed, the number (0 to 9) flashes
• MSK signaling is used in cloning. on the LCD.
• Electronic interface may cause a failure in data transfer When you press the [C>] key, the currently selected
during Wireless Clone, such as when waveforms or number is determined.
electromagnetics are being performed at the workbench. If you press the [A] key, the least digit of the password is
• Clone mode can be used ONLY by the authorized service deleted.
personnel. If you press the [S] key after entering the password in this
• The Clone mode setting must be configured as "Disable" procedure, “FRQTBL 1” is displayed if the entered
before being delivered to the end-user. password is correct.
• To clone, replace the antenna from both the master If the password is incorrect, “CLN.LOCK.R”/
transceiver and the slave transceiver with a dummy “CLN.LOCK.W” is redisplayed.
load.
• The transmit output power is automatically set to Low
in Clone mode.

5
TK-3212/3217
REALIGNMENT
■ Flow Chart (Master transceiver) If you press the [A] key, the least digit of the password is
[<B]+Power ON deleted.
If you press the [S] key after entering the password in this
Is Data
procedure, "SELF" is displayed if the entered password is
Yes
password correct.
set?
If the password is incorrect, "SLF.LOCK.R"/ "SLF.LOCK.W"
No "CLN.LOCK.R”/“CLN.LOCK.W”
is displayed. is redisplayed.

5-3. Channel Selection Mode


Enter the password and
then press the [S] key. In this mode, the Zone or Channel can be selected.
Press and hold the [S] key for 2 seconds while turning the
transceiver power on to enter self programming mode. When
Is password No the transceiver enters in the self programming mode, the
correct? transceiver automatically enters the Channel Selection mode.
Yes 2 seconds after displaying "SELF", "1- 1" appears on the LCD.

Clone mode
The setup item for channel selection mode is as follows.
[S]
Setup item Display Remarks
Start the clone function Select ∗∗∗ - ∗∗∗ Zone: 1~128
Zone/Channel ∗∗∗ - ∗∗∗ Channel: 1~128

5. Self Programming Mode Key operation


Write mode for frequency data and signaling, etc. To be Key Key Function
used ONLY by the authorized service person maintaining the [Selector] Toggle between Zone selection and Channel selection.
user's equipment. After programming, reset the FPU to the [Side1] No action
"Self- Programming" disabled mode. Transceivers CANNOT be [Side2] No action
delivered to the end-user in the self-programming mode. [S] Enter the Item Selection mode
[A] Error tone sounds
5-1. Enter to the Self Programming Mode [<B] Decrement the blinking Zone/Channel number by 1.
Press and hold the [S] key for 2 seconds while turning the Press and hold to decrement in steps of 10.
transceiver power on. [C>] Increment the blinking Zone/Channel number by 1.
When the transceiver enters in the self programming mode, Press and hold to decrement in steps of 10.
"1- 1" is displayed 2 seconds after "SELF " is displayed.
Note :
If a non-existing Zone-Channel is selected and the memory
Note :
for all 128 channels is already filled, an error tone will sound
This mode (self programming mode) cannot be set when it
and "MEM.FULL" will appear on the LCD for 2 seconds.
has been disabled with the FPU.

5-2. Adding the Data Password 5-4. Item Selection Mode


In this mode, the following items can be selected.
If the Data password is set to the transceiver, you must
• RX frequency
enter the password to activate a self programming mode. The
• RX signaling
maximum length of the password is 6 digits.
• TX frequency
The following describes how to enter the password.
• TX signaling
• Wide/ Narrow
1. Press and hold the [S] key for 2 seconds while turning the
• RF power Hi/Low
transceiver power on.
• Scan Del/Add
2. "SLF.LOCK.R"(When the Read authorization password is
• Beat shift on/off
set to the transceiver.) / "SLF.LOCK.W" (When the
• Compander on/off
Overwrite password is set to the transceiver.) is displayed
When the [S] key is pressed in the Channel Selection mode,
on the LCD.
the transceiver enters the Item Selection mode.
3. If the [selector] knob is rotated while "SLF.LOCK.R"/
"SLF.LOCK.W" is displayed, the number (0 to 9) flashes on
the LCD.
When you press the [C>] key, the currently selected
number is determined.
6
TK-3212/3217
REALIGNMENT
Key operation 5-6. Self Programming Mode flow chart
Key Key Function ■ Channel selection mode flow chart
[Selector] The selected item changes
[S]+Power ON Display
[Side1] No action When the Read
Data password SLF.LOCK.R authorization password is
[Side2] No action
or set to the transceiver.
[S] Enter the Item Setting mode
When the Overwrite
[A] Return to the Channel Selection mode SLF.LOCK.W authorization password is
set to the transceiver.
[<B] Error tone sounds
Read authorization password /
[C>] Error tone sounds Overwrite password entry (6 digits)
[S]
5-5. Item Setting Mode Self programming mode SELF I I
In this mode, the selected item in the Item Selection mode Zone Channel
can be programmed.
[Selector]
When the [S] key is pressed in the Item Selection mode,
Channel selection mode Zone selection Channel selection
the transceiver enters the Item Setting mode.
[A] [S] [<B] : Zone/Channel number decrement
[C>] : Zone/Channel number increment
The setup items for item setting mode are as follows. Item selection mode
Setup item Display Remarks
[A] [S]
1.RX frequency 1. RX FREQ → Receive frequency
∗∗∗.∗∗∗∗∗ 327.00000~550.00000MHz Item setting mode
2.RX signaling 2. RX SIG → Receive QT/DQT [S]
TONE OFF/
QT ∗ ∗ ∗ .∗/
■ Item selection mode flow chart
DQT∗ ∗ ∗ N/
DQT∗ ∗ ∗ I Channel selection mode
3.TX frequency 3. TX FREQ → Transmit frequency
[S]
∗∗∗.∗∗∗∗∗ 327.00000~550.00000MHz
4.TX signaling 4. TX SIG → Transmit QT/DQT
1. RX frequency
TONE OFF/ [A] [S]
QT ∗ ∗ ∗ .∗/ [Selector]
DQT∗ ∗ ∗ N/ 2. RX signaling
DQT∗ ∗ ∗ I [A] [S]
[Selector]
5. Wide / Narrow 5. BAND ∗ W/N
6.RF power Hi / Low 6. PWR ∗∗∗ HI / LOW 3. TX frequency
[A] [S]
7.Scan Del / Add 7. SCN ∗∗∗ DEL / ADD
[Selector]
8.Beat shift on / off 8. SFT ∗∗∗ ON / OFF
9.Compander on / off 9. CMP ∗∗∗ ON / OFF 4. TX signaling
[A] [S]
[Selector]
Key operation
5. Wide / Narrow
Key Key Function [A] [S]
[Selector] Changing the selection item (RX/ TX frequency and [Selector]
RX/ TX signaling only) 6. RF power Hi / Low
[Side1] No action [A] [S]
[Selector]
[Side2] No action
[S] • Store the current settings and return to the Item 7. Scan Del / Add
[A] [S]
Selection mode.
[Selector]
• A MHz digit of the frequency blinks.
(RX/ TX frequency only) 8. Beat shift on / off
[A] [S]
• The icon of the current signaling configuration blinks. [Selector]
(RX/ TX signaling only)
9. Compander on / off
[A] Abort the current settings and return to the Item [A] [S]
Selection mode without backup. [Selector]
[<B] Toggle/ Decrease the blinking value.
Item setting mode
[C>] Toggle/ Increase the blinking value.

7
TK-3212/3217
REALIGNMENT
■ Item setting mode flow chart 6. Firmware Version Information
Display Turn the transceiver ON with the [Side1] and [Side2] keys
[1. RX frequency] or Current
setting value 450. 00000 held down. Then, the version is displayed during holding the
[3. TX frequency]
-------- [Side1] and [Side2] keys.
Value is not set
[S]
MHz setting [<B] / [C>] [S] 450. 00000
[A]
[Selector]

KHz setting [<B] / [C>] [S] 450. 00000


[A]
[Selector]

Channel step [<B] / [C>] [S] STP 5.00K


[A]
[Selector]

Frequency clear [S] : Cleared --------


[A]
[Selector]

[2. RX signaling] or
[4. TX signaling]

[S] Display
OFF [S] : Tone off TONE OFF
[A]
[Selector]

QT [<B] / [C>] [S] QT 67.0


[A]
[Selector]

DQT N [<B] / [C>] [S] DQT 023N


[A]
[Selector]

DQT I [<B] / [C>] [S] DQT 023 I


[A]
[Selector]

5. Wide / Narrow
[S] [<B] / [C>] Display
Wide / Narrow selection Wide Narrow 5.BAND W
[A]:Not
stored [S] : Stored

6. RF power Hi / Low
[S] [<B] / [C>] Display
Hi / Low selection Hi Low 6.PWR HI
[A]:Not
stored [S] : Stored

7. Scan Del / Add


[S] [<B] / [C>] Display
Del / Add selection Del Add 7.SCN ADD
[A]:Not
stored [S] : Stored

[8. Beat shift on / off] or


[9. Compander on / off]
[S] [<B] / [C>] Display
on / off selection on off 8.SF T ON or
[A]:Not
stored [S] : Stored 9.CMP ON

8
TK-3212/3217
DISASSEMBLY FOR REPAIR

Disassembly Procedure ■ Removing the TX-RX unit from the chassis.


1. Remove the packing m from the SP / MIC jack of the TX-
■ Removing the case assembly from the chassis.
RX unit.
1. Remove the volume knob z and channel knob x.
2. Remove the eleven screws , fixing the TX-RX unit.
2. Remove the two screws c.
3. Remove the mounting hardware . of the SP / MIC.
3. Lift and remove the chassis from the case assembly v. 4. Remove the solder of the antenna terminal with a soldering
(Use a flat-blade screwdriver to easily lift the chassis.)
iron /.
1 5. Remove the solder of the positive terminal with a soldering
2
iron Ω.
3
Note: You can remove the TX-RX unit from the chassis without
3 removing the solder at the positive terminal. However,
4 in this case, you can not attach the packing (G53-1605-
03) that is on the positive terminal to the chassis in
assembling. So, it is advisable to remove the solder on
the positive terminal first.
6. Remove the FPC from the flat cable connector ≈.
7. Lift and remove the TX-RX unit from the chassis ç.
8
8

■ Removing the LCD ASSY from the mounting


hardware
1. Remove the sheet attached to the flat cable connector z. 9
2. Remove the FPC from the flat cable connector x. 10

Note: Be careful not to forget to attach the sheet after the


LCD ASSY is reassembled. 8
3. Insert a flat-head screwdriver on the right side of the 8
8 8
illumination guide c, then lever the screwdriver to remove 8
the right side of the illumination guide from the mounting 12
hardware v. 13
4. Slide the LCD ASSY b to the right so that the two tabs on
the left side of the illumination guide are removed from the
7
mounting hardware n.
11
Sheet 4

1
3
■ Removing the battery release lever from the case
2 assembly.
1. Press the upper part of the lever toward the inside of the
case assembly. One side of the shaft will be removed z.
Sheet
2. Lift and remove the battery release lever from the case
assembly x.
Mounting hardware Note: Scratch and widen the glue hole if there is difficulty in
Illumination guide removing the other end of the shaft.
No glue is required when you reassemble the battery
6 release lever.

9
TK-3212/3217
DISASSEMBLY FOR REPAIR

Precautions for Reassembly ■ Attaching the positive terminal to the chassis.


Always attach the positive terminal to the chassis, using
■ Attaching the battery release lever to the case
the following procedures, before mounting the TX-RX unit
assembly.
onto the chassis.
1. Insert one side of the shaft into the hole at the lever fitting
1. Remove the holder assembly x from the packing z of
section on the case assembly z.
the positive terminal.
Note: The thin spring (G01-4543-04) should be positioned
2. Mount the packing of the positive terminal into the chassis
above the two tabs of the lever.
hole c.
2. Tilt the battery release lever slightly forward x, so that the
3. Mount the holder assembly into the packing of the positive
thick spring (G01-4542-04) is positioned below the case
terminal v.
surface.
3. With the thick spring positioned below the case surface, attach 2
the other side of the shaft to the case assembly by pressing
the battery release lever c until it snaps into place v.
Note: Be careful not to tilt the battery release lever too
forward. 3
If the battery release lever is pushed in this state where
the two tabs come below the case surface, there is a
1
possibility of damaging the two tabs.
A thin spring
4

Two tabs
Shaft
A thick spring

2
1

■ Mounting the chassis to the case assembly.


3 1. Confirm that the waterproof packing attached to the
4
circumference of the chassis is securely inserted in the
groove of the chassis z.
2. Attach the speaker to the speaker recess of the case
assembly x. Make sure the speaker is securely inserted.

■ Assembling the battery release lever 2


1. Place the lever x onto the stopper z.
2. Place the thick spring c onto the lever.
3. Hook the right and left ends of the thin spring v onto the
tabs of the stopper, then place the thin spring onto the 1
lever b.
Confirm that the
4. Slide the shaft through the hole of the stopper and lever n. waterproof packing is
securely inserted in the
4 groove of the chassis.

3 3. Insert the upper part of the chassis into the case assembly
c.
Note: Take care that the speaker lead wire is not caught by
5
2 the microphone element.
4. Press the chassis v and the case assembly together to
6 attach them.

1
10
TK-3212/3217
DISASSEMBLY FOR REPAIR
Note: If the packing of the SP / MIC does not come to the ■ Connecting the speaker wires to the TX-RX unit
correct position after attaching the chassis to the case 1. To connect the speaker wires, solder them to the speaker
assembly, reposition the packing with your fingers. terminals of the TX-RX unit z.
3 2. Align the speaker wires as shown in figure, making sure to
avoid the legs of the discriminator.
3. Attach the fibrous sheet to the speaker wires as shown by
the silk print on the TX-RX unit x.

2
Fibrous sheet 1

legs of the discriminator


SP-
4 SP+

Silk print

■ LCD ASSY Installation Procedure


1. Insert the two tabs on the left side of the illumination guide
into the matching slots of the mounting hardware z. ■ Attaching the antenna receptacle to the chassis.
2. Insert the tab on the right side of the illumination guide into Screw the antenna receptacle to the chassis in the order
the mounting hardware using a pair of tweezers x, then shown in the drawing so that the antenna receptacle comes
press the illumination guide down until it snaps into place to the center of the case hole.
c.
3. Ensure that the tab of the illumination guide is fully inserted
into the mounting hardware.

1 Tighten this screw first.


1
Tighten this screw second.

■ The nuts of the volume knob and channel knob


Note that the shapes, colors and heights of nuts of the
2
volume knob and channel knob are different from one
another. (The nut of volume knob is silver, and the nut of
channel knob is gold)
Use the following jig when removing the nuts of the
volume knob and channel knob.
● Jig (Part No. : W05-1012-00)

Volume Knob Channel Knob


(Silver) (Gold)

Ensure that the tab of the illumination guide


is fully inserted into the mounting hardware.

11
TK-3212/3217
CIRCUIT DESCRIPTION
1. Frequency Configuration 3) IF Amplifier Circuit
The receiver utilizes double conversion. The first IF is 38.85 The first IF signal is passed through a four-pole monolithic
MHz and the second IF is 450 kHz. The first local oscillator crystal filter (XF201) to remove the adjacent channel signal.
signal is supplied from the PLL circuit. The filtered first IF signal is amplified by the first IF amplifier
The PLL circuit in the transmitter generates the necessary (Q203) and then applied to the lF system IC (IC201). The IF
frequencies. Fig. 1 shows the frequencies. system IC provides a second mixer, second local oscillator,
limiting amplifier, quadrature detector and RSSI (Received
ANT TX/RX: 450 ~ 490MHz (TK-3212(K,M)) CF Signal Strength Indicator). The second mixer mixes the first
470 ~ 512MHz (TK-3212(K2,M2)) 450kHz
440 ~ 480MHz (TK-3217(M))
SP
IF signal with the 38.4MHz of the second local oscillator
MCF output (TCXO X1) and produces the second IF signal of
RF AF
ANT SW IF SYSTEM
AMP AMP
450kHz.
38.85MHz
38.4MHz The second IF signal is passed through the ceramic filter
RX: 411.15 ~ 451.15MHz
TX: 450 ~ 490MHz
(TK-3212(K,M)) (TK-3212(K,M)) X3 multiply (CF201) to remove the adjacent channel signal. The filtered
470 ~ 512MHz 431.15 ~ 473.15MHz TCXO 12.8MHz
(TK-3212(K2,M2)) (TK-3212(K2,M2)) second IF signal is amplified by the limiting amplifier and
440 ~ 480MHz 401.15 ~ 441.15MHz
(TK-3217(M)) (TK-3217(M)) MIC demodulated by the quadrature detector with the ceramic
TX RF PLL MIC
AMP AMP VCO AMP discriminator (CD201). The demodulated signal is routed to
the audio circuit.
Fig. 1 Frequency configuration
4) Wide/Narrow Switching Circuit
Narrow and Wide settings can be made for each channel
2. Receiver by switching the demodulation level.
The frequency configuration of the receiver is shown in Fig. 2. The WIDE (low level) and NARROW (high level) data is
ANT output from IC405, pin 45.
When a WIDE (low level) data is received, Q202 turn on.
RF AMP MIXER MCF IF AMP
BPF Q205 BPF Q204 XF201 Q203 When a NARROW (high level) data is received, Q202 turn
ANT SW off.
TUNE TUNE 1st Local
Q202 turns off/on with the Wide/Narrow data and the IC201
detector output level is switched to maintain a constant
output level during wide or narrow signals.
CF201
IC301 IC302 SP
Q203
AF VOL AF PA
IC201 AQUA-L
IF,MIX,DET AFOUT
IC201
FM IF SYSTEM
X1
Q1
X3 multiply TCXO 12.8MHz

2nd Local QUAD IFOUT


Fig. 2 Receiver section
C214
R211
1) Front End (RF AMP) Q202
The signal coming from the antenna passes through the
RX_W/N
transmit/receive switching diode circuit, (D103,D104,D106 (IC405) R213 CD201
and D122) passes through a BPF (L229 and L228), and is L : Wide
amplified by the RF amplifier (Q205). H : Narrow
5R
The resulting signal passes through a BPF (L214,L212 and
L211) and goes to the mixer. These BPFs are adjusted by
variable capacitors (D203,D204,D205,D206 and D210). The Fig. 3 Wide/Narrow switching circuit
input voltage to the variable capacitor is regulated by
voltage output from the microprocessor (IC405). 5) Audio Amplifier Circuit
The demodulated signal from IC201 goes to AF amplifier
2) First Mixer through IC301.
The signal from the front end is mixed with the first local The signal then goes through an AF volume control, and is
oscillator signal generated in the PLL circuit by Q1 to routed to an audio power amplifier (IC302) where it is amplified
produce a first IF frequency of 38.85 MHz. and output to the speaker.
The resulting signal passes through the XF201 MCF to cut
the adjacent spurious and provide the opitimun
characteristics, such as adjacent frequency selectivity.

12
TK-3212/3217
CIRCUIT DESCRIPTION
6) Squelch phase with the 5 or 6.25kHz reference signal from the phase
Part of the AF signal from the IC enters the FM IC (IC201) comparator in IC1. The output signal from the phase
again, and the noise component is amplified and rectified comparator is filtered through a low-pass filter and passed
by a filter and an amplifier to produce a DC voltage to the VCO to control the oscillator frequency.(See Fig. 5)
corresponding to the noise level.
The DC signal from the FM IC goes to the analog port of 2) VCO
the microprocessor (IC405). IC405 determines whether to The operating frequency is generated by Q4 in transmit
output sounds from the speaker by checking whether the mode and Q3 in receive mode. The oscillator frequency is
input voltage is higher or lower than the preset value. controlled by applying the VCO control voltage, obtained
To output sounds from the speaker, IC405 sends a high from the phase comparator, to the varactor diodes (D4 and
signal to the SP MUTE line and turns IC302 on through D7 in transmit mode and D5 and D9 in receive mode). The
Q303,Q304,Q305,Q306 and Q316. (See Fig. 4) RX pin is set high in receive mode causing Q5 turn on.
The TX pin is set high in transmit mode. The outputs from
7) Receive Signaling Q3 and Q4 are amplified by Q6 and sent to the RF amplifiers.
(1) QT/DQT
The output signal from FM IC (IC201) enters the
D4,7 Q4
microprocessor (IC405) through IC301. IC405 determines LPF
TX VCO Q2
BUFFER
whether the QT or DQT matches the preset value, and
controls the SP MUTE and the speaker output sounds LPF Q6 Q9
RF AMP
BUFF AMP
according to the squelch results.
D5,9 Q3
RX VCO
(2) MSK (Fleet Sync) Q5, 7
The MSK input signal from the FM IC goes to pin 31 of IC 301. T/R SW

RX
The signal is demodulated by MSK demodulator in IC 301. TX
The demodulated data goes to the CPU for processing.
PLL IC IC1
RECEIVE SIGNALING
IC301
FM IF IC201

IF Amp 5kHz/6.25kHz
SIGNAL 1/N
DTMF AQUA-L

PLL DATA
QT/DQT PHASE CHARGE
COMPARATOR PUMP
REF OSC

IC302 Q306,316 SP
AF PA SW 1/M
IC405
5kHz/6.25kHz
CLK,DATA,
BUSY QT/DQT IN STD,LOADN

X1
CPU Q303,304,305 12.8MHz
SW

AF CONT
Fig. 5 PLL circuit
Fig. 4 AF amplifier and squelch
3) Unlock Detector
(3) DTMF If a pulse signal appears at the LD pin of IC1, an unlock
The DTMF input signal from the FM IC (IC201) goes to condition occurs, and the DC voltage obtained from C4,
IC301, the DTMF decoder. The decoded information is then R5, and D1 causes the voltage applied to the microprocessor
processed by the CPU. to go low. When the microprocessor detects this condition,
the transmitter is disabled, ignoring the push-to-talk switch
input signal.
3. PLL Frequency Synthesizer
The PLL circuit generates the first local oscillator signal for
reception and the RF signal for transmission.

1) PLL
The frequency step of the PLL circuit is 2.5 or 5kHz.
A 12.8MHz reference an oscillator signal is divided at IC1
by a fixed counter to produce oscillator (VCO) output signal
which is buffer amplified by Q2 then divided in IC1 by a
programmable counter. The divided signal is compared in

13
TK-3212/3217
CIRCUIT DESCRIPTION

4. Transmitter System to make both voltages the same.


The change of power high/low is carried out by the change
1) Microphone Amplifier
of the reference voltage.
The signal from the microphone passes through IC301.
When encoding DTMF, it is turned OFF for muting the
4) Encode Signalling
microphone input signal by IC301.
(1) QT/DQT
The signal passes through the Audio processor (IC301) for
QT,DQT data of the QTTCXO Line is output from pin 28 of
the maximum deviation adjustment, and goes to the VCO
the CPU. The signal passes through a low-pass CR filter
modulation input.
and goes to the TCXO(X1).
IC301
The QT,DQT data of the QTVCO Line is output from pin 24
AGC
of the CPU. The signal passes through a low pass CR filter,
MIC mixes with the audio signal, and goes to the VCO modulation
AQUA-L VCO
input. TX deviation is adjusted by the CPU.

(2) DTMF
LPF
High-speed data is output from pin 2 of the CPU. The signal
IC405
passes through a low-pass CR filter, and provides a TX and
DTMF QTVCO LPF SP out tone, and is then applied to the audio processor
X1 (IC301). The signal is mixed with the audio signal and goes
QTTCXO LPF TCXO
CPU
to the VCO.
TX deviation is adjusted by the CPU.

(3) MSK (Fleet Sync)


Fig. 6 Microphone amplifier Fleet Sync utilizes 1200bps and 2400bps MSK signal is
output from pin 6 of IC301. And is routed to the VCO.
2) Drive and Final Amplifier When encoding MSK, the microphone input signal is muted.
The signal from the T/R switch (D101 is on) is amplified by
the pre-drive (Q101) and drive amplifier (Q102) to 50mW. 5. Power Supply
The output of the drive amplifier is amplified by the RF power There are four 5V power supplies 5M,5C,5R, and 5T. 5M
amplifier (Q103) to 4.0W (1W when the power is low). The for microprocessor is always output while the power is on.
RF power amplifier consists of two MOS FET stages. The 5M is always output, but turns off when the power is turned
output of the RF power amplifier is then passed through off to prevent malfunction of the microprocessor.
the harmonic filter (LPF) and antenna switch (D103 and 5C is a common 5V and is output when SAVE is not set to
D122) and applied to the antenna terminal. OFF.
ANT 5R is 5V for reception and output during reception.
D103
From
Q100 Q101 Q102 Q103 D122 5T is 5V for transmission and output during transmission.
T/R SW RF Pre-DRIVE DRIVE RF ANT
AMP POWER AMP LPF
(D101) AMP AMP SW
VD VG VG
5T
+B
VDD 6. Control Circuit
R127
The control circuit consists of a microprocessor (IC405) and
R128
its peripheral circuits. It controls the TX-RX unit and transfers
R129
IC101 IC101 data to the Display unit. IC405 mainly performs the following:
(1/2) (2/2)
(1) Switching between transmission and reception by the
PCTV
(IC405) PTT signal input.
(2) Reading system, group, frequency, and program data
Fig. 7 Drive and final amplifier and APC circuit
from the memory circuit.
(3) Sending frequency program data to the PLL.
(4) Controlling squelch on/off by the DC voltage from the
3) APC Circuit
squelch circuit.
The APC circuit always monitors the current flowing through
(5) Controlling the audio mute circuit by the decode data
the RF power amplifier (Q103) and keeps a constant current.
input.
The voltage drop at R127, R128 and R129 is caused by the
(6) Transmitting tone and encode data.
current flowing through the RF power amplifier and this
voltage is applied to the differential amplifier IC101(1/2). 1) Frequency Shift Circuit
IC101(2/2) compares the output voltage of IC101(1/2) with The microprocessor (IC405) operates at a clock of
the reference voltage from IC405. The output of IC101(2/2) 7.3728MHz. This oscillator has a circuit that shifts the
controls the VG of the RF power amplifier and Drive amplifier frequency by BEAT SHIFT SW (Q407, Q408).

14
TK-3212/3217
CIRCUIT DESCRIPTION
A beat sound may be able to be evaded from generation if
SB R404 IC405
“Beat Shift” is set to ON when it is generated in the internal
88
spurious transmission modulated sound of a transceiver. BATT
CPU
11

R406
XOUT
X3 IC405
8
BSHIFT

Q408 Q407 Fig. 10 Low battery warning


H:OFF H:OFF
L : ON L : ON

Fig. 8 Frequency shift circuit 7. Control System


LCD, Keys and channel selector circuit.
2) Memory Circuit The signal from keys and channel selector input to
Memory circuit consists of the CPU (IC405) and an EEPROM microprocessor directly as shown in fig. 11.
(IC406). An EEPROM has a capacity of 64k bits that contains
Channel selector
the transceiver control program for the CPU and data such 27
PTT PTT
as transceiver channels and operating features. SW

IC405 IC406
CPU EEPROM 49 IC405
EN1
71 CPU
EN2 SIDE 1 74
Fig. 9 Memory circuit SW1

75
SIDE 2
3) Low Battery Warning SW2

The battery voltage is checked by the microprocessor.


The transceiver generates a warning tone when the battery Fig. 11 Control system
voltage falls below the warning voltage (2) shown in the
table.

(1) The red LED blinks when the battery voltage falls below
the voltage (1) shown in the table during transmission.
Transmission is still allowed.
Note:
The transceiver checks the battery voltage during reception
even when, in the FPU, the Battery Warning status function
is set to “While Transmitting” (default setting).
However, the LED does not blink during reception. The red
LED blinks during transmission. The transceiver is still
usable.

(2) The transceiver immediately stops transmission when


the battery voltage falls below the voltage (2) shown in
the table. A warning tone sounds while the PTT switch
is pressed.

Ni-MH Battery
(1) 6.2[V]
(2) 5.8[V]

15
TK-3212/3217
SEMICONDUCTOR DATA
Microprocessor : 30620MCP-A00GP (TX-RX UNIT : IC405)
■ Pin function
Pin Pin
No. Port Name I/O Function Port Name I/O Function
No.
1 PCTV O APC/BPF control data output 46-48 NC - NC
2 DTMF O DTMF/ Beep output 49 EN1 I Channel selector input
3 NC - NC 50 NC - NC
4 EEPDAT I/O EEPROM data input/output 51 OPTDET I Headset input detect
5 EEPCLK O EEPROM clock output 52 AF_CONT O Speaker mute
6 BYTE - GND 53 DO O LCD driver
7 GND - GND 54 CE O LCD driver
8 BSHIFT O Beat shift switch 55 CL O LCD driver
9 NC - NC 56 DI I LCD driver
10 RESET I CPU reset 57-59 NC - NC
11 XOUT O CPU clock (7.3728MHz) 60 VCC - +5V
12 VSS - GND 61 NC - NC
13 XIN I CPU clock (7.3728MHz) 62 VSS - GND
14-15 VCC - +5V 63-64 GND - GND
16 INT I Battery voltage monitor input 65-68 NC - NC
17 TCLK/DTRDO I Base band IC data input 69 AUX O Reserved
18 RDF/FD I Base band IC data input 70 NC - NC
19 SCLK O Base band IC clock output 71 EN2 I Channel selector input
20 D I/O I/O Base band IC data input / output 72 LEDTX O Red LED lights control output
21 TDATA/DTRCLK O Base band IC data output 73 LEDRX O Green LED lights control output
22 DIR O Base band IC data output 74 PF1 I SIDE1 key input
23 STD I Base band IC data input 75 PF2 I SIDE2 key input
24 QT VCO O QT/DQT output 76 SIM1 - GND
25 DTRLOADN O Base band IC data output 77 SIM2 - GND
26 NC - NC 78-79 NC - NC
27 PTT I PTT switch input 80 5T_C O 5T control output
28 QT TCXO O QT/DQT output 81 5R_C O 5R control output
29 TXD O Serial data (FPU/FLASH) 82 5C_C O 5C control output
30 RXD I Serial data (FPU/FLASH) 83-87 NC - NC
31 GND - GND 88 BATT I Battery voltage input
32 APCSW O APC switch Received Signal Strength
89 RSSI I
33-34 NC - NC Indicator input
35 DCSW O APC voltage discharge switch 90 BUSY I Busy level input
36 TX_W/N O TX Wide/Narrow switch 91 VOX I VOX level input
37 RX_SW O RX VCO switch 92 QT/DQT_IN I QT/DQT input
38 TX_SW O TX VCO switch 93 TH_DET I Thermistor input
39 GND - GND 94 AVSS - GND
40 PLL_UL I PLL unlock detect input 95 NC - NC
41 PLL_STB O PLL strobe output 96 VREF - +5V
42 PLL_DAT O PLL data output 97 AVCC - +5V
43 PLL_CLK O PLL clock output 98 NC - NC
44 VCC - +5V 99 MIC_MUTE O MIC mute
45 RX_W/N O RX Wide/Narrow switch 100 NC - NC

16
TK-3212/3217
COMPONENTS DESCRIPTION / TERMINAL FUNCTION
TX-RX UNIT (X57-7130-XX)
Ref. No. Part name Description Ref. No. Part name Description
IC1 IC PLL system D1 Diode Ripple filter
IC101 IC Comparator (APC) D2 Varicap Frequency control / TX VCO
IC201 IC FM IF system D3 Varicap Frequency control / RX VCO
IC301 IC Audio processor D4 Varicap Frequency control / TX VCO
IC302 IC AF AMP D5 Varicap Frequency control / RX VCO
IC401,402 IC Voltage regulator/ 5V D6,7 Varicap Frequency control / TX VCO
IC403 IC Voltage detector / Reset D8,9 Varicap Frequency control / RX VCO
IC404 IC Voltage detector / INT D10 Varicap Modulator
IC405 IC Microprocessor D11 Diode Current steering
IC406 IC EEPROM D101 Diode TX/RX RF switch
IC407 IC Frequency divider D102 Zener diode APC protect
Q1 Transistor Tripler D103,104 Diode ANT switch
Q2 Transistor PLL IC f_in AMP D106 Diode ANT switch
Q3 FET VCO / RX D122 Diode ANT switch
Q4 FET VCO / TX D202 Diode TX/RX RF switch
Q5 Transistor DC switch / TX VCO D203-206 Varicap RF BPF tuning
Q6 Transistor RF buffer AMP D210 Varicap RF BPF tuning
Q7 Transistor DC switch / RX VCO D301,302 Diode Detector
Q8 Transistor Ripple filter D303 Diode Isolation
Q9 Transistor RF AMP D401 Diode 5V protection
Q100 Transistor RF AMP D402 Diode Reverse protection
Q101 FET RF AMP D403 LED LED/ Red
Q102 FET TX drive AMP D404 LED LED/ Green
Q103 FET TX final AMP
Q104 Transistor APC switch TERMINAL FUNCTION
Q105 FET APC switch ■ CN401
Q107 Transistor APC switch Pin
No. Name I/O Function
Q108 FET APC switch
Q109 Transistor APC switch 1 B I B (Battery Voltage)

Q202 Transistor W/N switch / RX 2 SB O Switched B

Q203 Transistor IF AMP 3 AFI I Audio input

Q204 FET Mixer 4 AFO O Audio output

Q205 FET RF AMP 5 GND - GND

Q301 Transistor W/N switch / TX 6 UP I Encoder pulse input

Q302 Transistor MIC AGC 7 DOWN I Encoder pulse input

Q303 Transistor DC switch / SP mute 8 GND - GND

Q304 Transistor DC switch


■ CN402
Q305 Transistor DC switch / SP mute
Pin
Q306 FET SP mute switch No. Name I/O Function

Q316 FET SP mute switch 1 GND - GND


Q401 Transistor LED switch / Red 2 NC - No connection
Q402 Transistor LED switch / Green 3 SB O Switched B
Q403 FET 5T switch 4 5M - Power supply
Q404 Transistor 5R switch 5 GND - GND
Q405 Transistor 5C switch 6 DI I Transfer data
Q407,408 FET Beat shift switch 7 CL I Synchronization clock
Q901 FET W/N switch / TX 8 CE I Chip enable
9 DO O Output data
10 GND - GND

17
TK-3212/3217
PARTS LIST
∗ New Parts. indicates safety critical components. L: Scandinavia K: USA P: Canada
Parts without Parts No. are not supplied. Y: PX (Far East, Hawaii) T: England E: Europe
Les articles non mentionnes dans le Parts No. ne sont pas fournis. Y: AAFES (Europe) X: Australia M: Other Areas
Teile ohne Parts No. werden nicht geliefert.

TK-3212/3217 (Y50-5980-XX)
TX-RX UNIT (X57-7130-XX)
New New
Ref. No. Address parts Parts No. Description Destination Ref. No. Address parts Parts No. Description Destination

57 1A ∗ J99-0385-04 ADHESIVE SHEET(LCD)


TK-3212/3217 58 1B K29-9307-13 BUTTON KNOB(SIDE1/SIDE2)
1 1B ∗ A02-3894-13 PLASTIC CABINET ASSY 59 1B K29-9308-13 BUTTON KNOB(PTT)
2 3A ∗ A10-4078-31 CHASSIS 60 1B K29-9309-03 KNOB(VOL)
3 2C B09-0680-03 CAP(SP/MIC) ACCESSORY 61 1B ∗ K29-9345-04 KNOB(ENC)
4 2B B11-1817-04 ILLUMINATION GUIDE(TX/RX)
5 1A ∗ B11-1830-03 ILLUMINATION GUIDE(LCD) 62 2B ∗ K29-9346-02 KEY TOP

6 1A ∗ B38-0906-15 LCD ASSY A 2B N14-0819-04 CIRCULAR NUT(VOL KNOB)


7 1C ∗ B62-1817-00 INSTRUCTION MANUAL(ENG/SPA/FR) AK,AM,AK2 B 2B N14-0820-04 CIRCULAR NUT(CH KNOB)
7 1C ∗ B62-1817-00 INSTRUCTION MANUAL(ENG/SPA/FR) AM2 C 2A N30-2604-46 PAN HEAD MACHINE SCREW(SMA)
7 1C ∗ B62-1818-00 INSTRUCTION MANUAL(KOREAN) BM D 3A N30-2606-46 PAN HEAD MACHINE SCREW(CHASSIS)
9 1B D10-0649-03 LEVER E 1A,2A, N83-2005-46 PAN HEAD TAPTITE SCREW(PCB)
2B, 3A
10 1B D21-0863-04 SHAFT
11 1B D32-0441-03 STOPPER 65 1C N99-2043-05 SCREW SET ACCESSORY
12 2A E04-0451-05 RF COAXIAL RECEPTACLE(SMA) 66 2A R31-0653-05 VARIABLE RESISTOR(POWER SW/VOL)
13 3A E23-1253-04 TERMINAL(BATT-) 67 1B T07-0369-05 SPEAKER
- E37-0781-05 PROCESSED LEAD WIRE(PCB) 68 1C T90-0798-25 HELICAL ANTENNA ACCESSORY BM
69 1C T90-1039-15 WHIP ANTENNA ACCESSORY AK,AM
14 2B E37-1158-05 PROCESSED LEAD WIRE(SP+)
15 2B E37-1176-05 PROCESSED LEAD WIRE(SP-) 69 1C T90-1040-15 WHIP ANTENNA ACCESSORY AK2,AM2
16 3A F20-3353-14 INSULATING SHEET(CHASSIS BATT+) 71 2A ∗ W02-3684-05 ENCODER
17 2B G01-4542-04 COIL SPRING(LEVER) 72 2D W08-0969-05 CHARGER ACCESSORY
18 2B G01-4543-04 COIL SPRING(STOPPER) 73 1D W08-0970-05 AC ADAPTER(AC120V) ACCESSORY AK,AK2
73 1D W08-0971-05 AC ADAPTER(AC230V) ACCESSORY AM,AM2
19 2A G10-1330-04 FIBROUS SHEET(IC302:AUDIO IC)
21 2A ∗ G10-1348-04 FIBROUS SHEET(SP WIRE)
22 3A G11-4283-04 RUBBER SHEET(Q103:FINAL FET) TX-RX UNIT (X57-7130-XX) -10:TK-3212 (K,M)
23 2A ∗ G11-4359-04 SHEET(FPC CONNECTOR)
-11: TK-3212 (K2,M2) -21: TK-3217 (M)
24 3A G13-2033-04 CUSHION(TERMINAL BATT-)
D403 B30-2156-05 LED(RED)
25 3A G13-2034-14 CUSHION(TERMINAL BATT-) D404 B30-2157-05 LED(YELLOW)
27 3A G13-2038-14 CUSHION(CHASSIS-CERAMIC FILTER) C1 CK73HB1H332K CHIP C 3300PF K
28 2A G13-2039-04 CUSHION(PCB-CERAMIC FILTER) C2 CK73HB1C682K CHIP C 6800PF K
29 3A G13-2045-04 CUSHION(CHASSIS) C3 CK73GB1A105K CHIP C 1.0UF K
30 2A ∗ G13-2053-04 CUSHION(CHASSIS,ENC)
C4 CK73HB1C103K CHIP C 0.010UF K
31 2A ∗ G13-2074-04 CUSHION(PCB) C5 CK73HB1H102K CHIP C 1000PF K
32 3A ∗ G13-2088-04 CUSHION(CHASSIS,VOL) C6 CK73HB1A104K CHIP C 0.10UF K
33 2A ∗ G13-2107-04 CUSHION(MOUNTING HARDWARE) C7 ,8 CC73HCH1H101J CHIP C 100PF J
34 3A G53-1604-03 PACKING(CHASSIS) C9 CC73HCH1H100D CHIP C 10PF D
35 3A G53-1605-03 PACKING(TERMINAL BATT+)
C10 C92-0560-05 CHIP-TAN 10UF 6.3WV
36 2B G53-1606-13 PACKING(VOL/ENC/LED) C11 CC73HCH1H101J CHIP C 100PF J
38 2A G53-1610-04 PACKING(SMA) C12 CK73HB1H102K CHIP C 1000PF K
39 2B ∗ G53-1660-03 PACKING(SP) C13 CK73HB1A104K CHIP C 0.10UF K
40 2A ∗ G53-1661-03 PACKING(SP/MIC) C14 CK73HB1C103K CHIP C 0.010UF K
41 2C ∗ H12-3179-05 PACKING FIXTURE
C15 CC73HCH1H100D CHIP C 10PF D
42 1D H13-2109-03 CARTON BOARD C16 CK73HB1H102K CHIP C 1000PF K
43 1C H25-0085-04 PROTECTION BAG (100/200/0.07) C17 CC73HCH1H470J CHIP C 47PF J
44 3C ∗ H52-2071-02 ITEM CARTON CASE AK,AM,AK2 C18 CC73HCH1H180J CHIP C 18PF J
44 3C ∗ H52-2071-02 ITEM CARTON CASE AM2 C19 CK73HB1A104K CHIP C 0.10UF K
44 3C ∗ H52-2072-02 ITEM CARTON CASE BM
C21 C92-0560-05 CHIP-TAN 10UF 6.3WV
46 2C J19-5472-03 HOLDER(SP/MIC) ACCESSORY C22 C92-0502-05 CHIP-TAN 0.33UF 35WV
50 2A J19-5473-03 HOLDER ASSY(TERMINAL BATT+) C24 CK73HB1H102K CHIP C 1000PF K
51 2B J21-8477-04 MOUNTING HARDWARE(VOL/ENC) C25 CC73HCH1H020B CHIP C 2.0PF B
52 1A ∗ J21-8496-02 MOUNTING HARDWARE(LCD) C26 CC73HCH1H300J CHIP C 30PF J
53 2B ∗ J21-8497-03 MOUNTING HARDWARE(4 KEY)
C27 C92-0697-05 CHIP-TAN 3.3UF 16WV
54 2C J29-0713-05 BELT CLIP ACCESSORY C29 CK73HB1H471K CHIP C 470PF K
55 1C J69-0352-05 HANDSTRAP ACCESSORY BM C32 C92-0001-05 CHIP-TAN 0.1UF 35WV
56 2A ∗ J82-0107-05 FPC C33 ,34 CK73HB1H102K CHIP C 1000PF K

AK : TK-3212 (K) AK2 : TK-3212 (K2) AM : TK-3212 (M) AM2 : TK-3212 (M2)
18 BM : TK-3217 (M)
TK-3212/3217
PARTS LIST
TX-RX UNIT (X57-7130-XX)
New New
Ref. No. Address parts Parts No. Description Destination Ref. No. Address parts Parts No. Description Destination

C35 CC73HCH1H270J CHIP C 27PF J C123 CC73GCH1H330G CHIP C 33PF G


C38 CC73HCH1H050B CHIP C 5.0PF B C124 CC73HCH1H100D CHIP C 10PF D
C39 CK73GB1H332K CHIP C 3300PF K C125 CC73GCH1H060B CHIP C 6.0PF B
C40 CC73HCH1H030B CHIP C 3.0PF B C126 C92-0004-05 CHIP-TAN 1.0UF 16WV
C41 CK73GB1H682K CHIP C 6800PF K C127 CC73GCH1H200J CHIP C 20PF J

C42 CC73HCH1H050B CHIP C 5.0PF B C128 CK73HB1H471K CHIP C 470PF K


C43 CC73HCH1H100C CHIP C 10PF C C129 CK73GB1H471K CHIP C 470PF K
C44 CK73HB1H471K CHIP C 470PF K C130 CK73HB1H471K CHIP C 470PF K
C45 CK73GB1A105K CHIP C 1.0UF K C132 CC73GCH1H240J CHIP C 24PF J BM
C47 CC73HCH1H101J CHIP C 100PF J C132 CC73GCH1H270J CHIP C 27PF J AK,AM,AK2

C48 CK73HB1H471K CHIP C 470PF K C132 CC73GCH1H270J CHIP C 27PF J AM2


C49 CC73HCH1H101J CHIP C 100PF J C133 CK73GB1H471K CHIP C 470PF K
C50 CC73HCH1H100D CHIP C 10PF D C134 CK73GB1H103K CHIP C 0.010UF K
C52 CC73HCH1H110J CHIP C 11PF J AK,AM C135 CK73GB1C104K CHIP C 0.10UF K
C52 CC73HCH1H120J CHIP C 12PF J AK2,AM2,BM C136 CK73GB1A105K CHIP C 1.0UF K

C54 CC73HCH1H060B CHIP C 6.0PF B BM C138 CK73GB1H102K CHIP C 1000PF K


C54 CC73HCH1H090B CHIP C 9.0PF B AK,AM,AK2 C140 CC73GCH1H101J CHIP C 100PF J
C54 CC73HCH1H090B CHIP C 9.0PF B AM2 C142 CC73GCH1H070B CHIP C 7.0PF B BM
C55 CC73HCH1H110J CHIP C 11PF J AK,AM C145 CC73GCH1H160J CHIP C 16PF J AK,AM
C55 CC73HCH1H120J CHIP C 12PF J AK2,AM2,BM C145 CC73GCH1H180J CHIP C 18PF J AK2,AM2,BM

C56 CC73HCH1H020B CHIP C 2.0PF B AK,AM C146 CK73GB1H102K CHIP C 1000PF K


C58 CC73HCH1H060B CHIP C 6.0PF B AK,AM,BM C148 CK73GB1H102K CHIP C 1000PF K
C58 CC73HCH1H090B CHIP C 9.0PF B AK2,AM2 C151 CC73GCH1H070B CHIP C 7.0PF B AK2,AM2
C59 ,60 CC73HCH1H010B CHIP C 1.0PF B C152 CC73GCH1H200J CHIP C 20PF J
C61 CC73HCH1H030B CHIP C 3.0PF B AK,AM,BM C154 CK73GB1H471K CHIP C 470PF K

C61 CC73HCH1H040B CHIP C 4.0PF B AK2,AM2 C156 CC73GCH1H040B CHIP C 4.0PF B BM


C62 CC73HCH1H020B CHIP C 2.0PF B C156 CC73GCH1H060B CHIP C 6.0PF B AK,AM
C63 CC73HCH1H101J CHIP C 100PF J C156 CC73GCH1H3R5B CHIP C 3.5PF B AK2,AM2
C64 CC73HCH1H040B CHIP C 4.0PF B AK,AM C157 CC73GCH1H010B CHIP C 1.0PF B BM
C64 CC73HCH1H050B CHIP C 5.0PF B BM C157 CC73GCH1H040B CHIP C 4.0PF B AK2,AM2

C64 ,65 CC73HCH1H050B CHIP C 5.0PF B AK2,AM2 C157 CC73GCH1H2R5B CHIP C 2.5PF B AK,AM
C65 ,66 CC73HCH1H060B CHIP C 6.0PF B AK,AM C158 CC73GCH1H101J CHIP C 100PF J
C65 ,66 CC73HCH1H070B CHIP C 7.0PF B BM C159 CC73GCH1H020C CHIP C 2.0PF C AK,AM,BM
C66 CC73HCH1H060B CHIP C 6.0PF B AK2,AM2 C159 CC73GCH1H030B CHIP C 3.0PF B AK2,AM2
C67 CC73HCH1H050B CHIP C 5.0PF B AK,AM,BM C160 CC73GCH1H020B CHIP C 2.0PF B AK,AM,BM

C67 CC73HCH1H070B CHIP C 7.0PF B AK2,AM2 C160 CC73GCH1H1R5B CHIP C 1.5PF B AK2,AM2
C68 -70 CK73HB1H471K CHIP C 470PF K C161 CC73GCH1H050B CHIP C 5.0PF B AK,AM,BM
C71 ,72 CK73HB1A104K CHIP C 0.10UF K C161 CC73GCH1H060B CHIP C 6.0PF B AK2,AM2
C73 ,74 CC73HCH1H0R5B CHIP C 0.5PF B C163 CC73GCH1H030B CHIP C 3.0PF B
C75 ,76 CK73HB1H102K CHIP C 1000PF K C164 CC73GCH1H050B CHIP C 5.0PF B AK,AM,BM

C77 CK73HB1H471K CHIP C 470PF K C164 CC73GCH1H060B CHIP C 6.0PF B AK2,AM2


C78 CC73HCH1H330J CHIP C 33PF J C166 CC73GCH1HR75B CHIP C 0.75PF B AK,AM,BM
C79 C92-0713-05 CHIP-TAN 10UF 6.3WV C166 CC73GCH1H1R5B CHIP C 1.5PF B AK2,AM2
C80 CK73HB1H471K CHIP C 470PF K C168 CC73GCH1H0R3B CHIP C 0.3PF B AK2,AM2
C83 CC73HCH1H150J CHIP C 15PF J C169 CC73GCH1H050B CHIP C 5.0PF B AK,AM

C84 -86 CK73HB1H102K CHIP C 1000PF K C169 CC73GCH1H060B CHIP C 6.0PF B BM


C87 CC73HCH1H100D CHIP C 10PF D C169 CC73GCH1H090B CHIP C 9.0PF B AK2,AM2
C90 CK73HB1H102K CHIP C 1000PF K C190 CK73GB1A105K CHIP C 1.0UF K
C100 CK73HB1H471K CHIP C 470PF K C191 CK73GB1H103K CHIP C 0.010UF K
C101 CK73GB1H471K CHIP C 470PF K C201 CK73GB1A224K CHIP C 0.22UF K

C102 CC73GCH1H120J CHIP C 12PF J C206 CK73HB1H102K CHIP C 1000PF K


C106 CK73HB1H471K CHIP C 470PF K C207 CK73HB1H182K CHIP C 1800PF K
C107 CC73GCH1H060B CHIP C 6.0PF B C208 CK73HB1H471K CHIP C 470PF K
C108 CK73HB1H471K CHIP C 470PF K C209 C92-0713-05 CHIP-TAN 10UF 6.3WV
C110,111 CK73GB1H471K CHIP C 470PF K C210 CK73HB1H471K CHIP C 470PF K

C112 CC73GCH1H070D CHIP C 7.0PF D C211 CK73HB1C103K CHIP C 0.010UF K


C113 CK73GB1C104K CHIP C 0.10UF K C213 CK73HB1A104K CHIP C 0.10UF K
C116 CC73GCH1H110J CHIP C 11PF J C214 CC73HCH1H680J CHIP C 68PF J
C119 CK73GB1H471K CHIP C 470PF K C215 CK73HB1H102K CHIP C 1000PF K
C122 CC73GCH1H330J CHIP C 33PF J C216 CK73GB1C104K CHIP C 0.10UF K

AK : TK-3212 (K) AK2 : TK-3212 (K2) AM : TK-3212 (M) AM2 : TK-3212 (M2)
BM : TK-3217 (M) 19
TK-3212/3217
PARTS LIST
TX-RX UNIT (X57-7130-XX)
New New
Ref. No. Address parts Parts No. Description Destination Ref. No. Address parts Parts No. Description Destination

C217 CK73HB1A104K CHIP C 0.10UF K C275 CC73GCH1H030B CHIP C 3.0PF B BM


C218 CK73GB1C104K CHIP C 0.10UF K C275 CC73GCH1H2R5B CHIP C 2.5PF B AK2,AM2
C219 CC73HCH1H330J CHIP C 33PF J C276 CC73GCH1H020B CHIP C 2.0PF B AK2,AM2
C220 CK73HB1H102K CHIP C 1000PF K C276 CC73GCH1H040B CHIP C 4.0PF B BM
C221 CK73GB1C104K CHIP C 0.10UF K C276 CC73GCH1H2R5B CHIP C 2.5PF B AK,AM

C222 CK73HB1H102K CHIP C 1000PF K C290 CC73GCH1H020B CHIP C 2.0PF B


C224,225 CK73HB1C103K CHIP C 0.010UF K C291 CC73GCH1H060B CHIP C 6.0PF B
C228 CC73GCH1H100C CHIP C 10PF C C292 CK73HB1H471K CHIP C 470PF K
C230 CK73HB1C103K CHIP C 0.010UF K C293 CC73GCH1H070B CHIP C 7.0PF B BM
C231 CK73GB1H103K CHIP C 0.010UF K C301 CK73HB1H392K CHIP C 3900PF K

C232 CK73HB1C103K CHIP C 0.010UF K C302 CK73HB1H271K CHIP C 270PF K


C233 CC73GCH1H060B CHIP C 6.0PF B C304 CK73GB1A224K CHIP C 0.22UF K
C234 CK73HB1H102K CHIP C 1000PF K C306 C92-0507-05 CHIP-TAN 4.7UF 6.3WV
C236 CC73GCH1H180J CHIP C 18PF J C307,308 CK73HB1A104K CHIP C 0.10UF K
C237 CK73HB1H102K CHIP C 1000PF K C309 CC73GCH1H820J CHIP C 82PF J

C238 CK73GB1C104K CHIP C 0.10UF K C310 CK73HB1A683K CHIP C 0.068UF K


C239 CK73GB1H102K CHIP C 1000PF K C311 CK73GB1A105K CHIP C 1.0UF K
C240 CC73GCH1H3R5B CHIP C 3.5PF B C312 CC73GCH1H120J CHIP C 12PF J
C241 CK73GB1H471K CHIP C 470PF K C313 CC73GCH1H121J CHIP C 120PF J
C244 CC73GCH1H030B CHIP C 3.0PF B AK,AM C314 CK73HB1A104K CHIP C 0.10UF K

C245 CC73GCH1H220J CHIP C 22PF J AK,AM C315 CK73GB1A105K CHIP C 1.0UF K


C246 CC73GCH1H010B CHIP C 1.0PF B AK,AM C316 CK73GB1C104K CHIP C 0.10UF K
C247 CK73HB1H471K CHIP C 470PF K AK,AM,BM C317 CK73HB1A104K CHIP C 0.10UF K
C248 CC73GCH1H020B CHIP C 2.0PF B AK,AM C318 C92-0507-05 CHIP-TAN 4.7UF 6.3WV
C249 CC73GCH1H030B CHIP C 3.0PF B AK2,AM2 C319 CC73GCH1H271J CHIP C 270PF J

C249 CC73GCH1H050B CHIP C 5.0PF B AK,AM C320 CK73HB1C103K CHIP C 0.010UF K


C249 CC73GCH1H2R5B CHIP C 2.5PF B BM C321 CK73GB1H103K CHIP C 0.010UF K
C250 CC73GCH1H180J CHIP C 18PF J AK2,AM2 C322 CK73HB1C153K CHIP C 0.015UF K
C250 CC73GCH1H220J CHIP C 22PF J AK,AM,BM C323 CC73GCH1H820J CHIP C 82PF J
C251 CK73HB1H471K CHIP C 470PF K C324 CC73HCH1H820J CHIP C 82PF J

C252 CC73GCH1H010B CHIP C 1.0PF B BM C325 CK73HB1A104K CHIP C 0.10UF K


C252 CC73GCH1H1R5B CHIP C 1.5PF B AK2,AM2 C326 CK73HB1H102K CHIP C 1000PF K
C252,253 CC73GCH1H020B CHIP C 2.0PF B AK,AM C327 CC73HCH1H101J CHIP C 100PF J
C253 CC73GCH1H010B CHIP C 1.0PF B AK2,AM2 C328 CK73HB1H391K CHIP C 390PF K
C253 CC73GCH1H1R5B CHIP C 1.5PF B BM C329,330 CK73GB1A105K CHIP C 1.0UF K

C254 CK73HB1H471K CHIP C 470PF K C331 CK73HB1A104K CHIP C 0.10UF K


C255 CC73GCH1H180J CHIP C 18PF J AK2,AM2 C332 CK73HB1H471K CHIP C 470PF K
C255 CC73GCH1H220J CHIP C 22PF J AK,AM,BM C333,334 CK73GB1C104K CHIP C 0.10UF K
C256 C92-0714-05 CHIP-TAN 4.7UF 6.3WV C335 CC73GCH1H221J CHIP C 220PF J
C257 CC73GCH1H050B CHIP C 5.0PF B AK2,AM2 C336 CK73FB1C474K CHIP C 0.47UF K

C257 CC73GCH1H3R5B CHIP C 3.5PF B AK,AM C338 CC73GCH1H101J CHIP C 100PF J


C257 CC73GCH1H4R5B CHIP C 4.5PF B BM C339 C92-0560-05 CHIP-TAN 10UF 6.3WV
C258 CK73HB1H471K CHIP C 470PF K C340 CK73GB1C104K CHIP C 0.10UF K
C259 CK73GB1H471K CHIP C 470PF K C341 CK73GB1C473K CHIP C 0.047UF K
C262,263 CK73HB1H471K CHIP C 470PF K C342 C92-0560-05 CHIP-TAN 10UF 6.3WV

C265 CK73HB1H471K CHIP C 470PF K C343 CK73GB1C473J CHIP C 0.047UF J


C266 CK73GB1H471K CHIP C 470PF K C344 CC73GCH1H221J CHIP C 220PF J
C267 CC73GCH1H040B CHIP C 4.0PF B BM C345 C92-0786-05 TANTAL 100UF 6.3WV
C267 CC73GCH1H3R5B CHIP C 3.5PF B AK,AM C346 CK73GB1H102K CHIP C 1000PF K
C267 CC73GCH1H4R5B CHIP C 4.5PF B AK2,AM2 C348 CK73HB1H471K CHIP C 470PF K

C268 CC73GCH1H180J CHIP C 18PF J AK2,AM2 C350 CK73HB1H471K CHIP C 470PF K


C268 CC73GCH1H220J CHIP C 22PF J AK,AM,BM C351,352 CK73HB1C103K CHIP C 0.010UF K
C269 CC73GCH1H020B CHIP C 2.0PF B C354 CK73HB1A104K CHIP C 0.10UF K
C270,271 CK73HB1H471K CHIP C 470PF K C356 CK73HB1A333K CHIP C 0.033UF K
C272 CC73GCH1H020B CHIP C 2.0PF B C357 CK73HB1E472K CHIP C 4700PF K

C273 CC73GCH1H180J CHIP C 18PF J AK2,AM2 C401 CC73GCH1H471J CHIP C 470PF J


C273 CC73GCH1H220J CHIP C 22PF J AK,AM,BM C402 CK73HB1H102K CHIP C 1000PF K
C274 CC73GCH1H010B CHIP C 1.0PF B BM C403 CK73GB1C104K CHIP C 0.10UF K
C274 CC73GCH1H1R5B CHIP C 1.5PF B AK2,AM2 C405 CC73GCH1H101J CHIP C 100PF J
C274,275 CC73GCH1H020B CHIP C 2.0PF B AK,AM C406 CK73HB1E472K CHIP C 4700PF K

AK : TK-3212 (K) AK2 : TK-3212 (K2) AM : TK-3212 (M) AM2 : TK-3212 (M2)
20 BM : TK-3217 (M)
TK-3212/3217
PARTS LIST
TX-RX UNIT (X57-7130-XX)
New New
Ref. No. Address parts Parts No. Description Destination Ref. No. Address parts Parts No. Description Destination

C407 CK73HB1H102K CHIP C 1000PF K L110 L40-2285-54 SMALL FIXED INDUCTOR(220NH)


C408 CK73HB1E472K CHIP C 4700PF K L111 L40-1092-81 SMALL FIXED INDUCTOR
C409,410 CK73GB1A105K CHIP C 1.0UF K L201 L40-1091-37 SMALL FIXED INDUCTOR(1.000UH)
C411 CK73HB1H102K CHIP C 1000PF K L202 L92-0138-05 CHIP FERRITE
C415 CK73HB1H471K CHIP C 470PF K L203 L40-5685-85 SMALL FIXED INDUCTOR(0.56UH)

C417 CK73GB1A105K CHIP C 1.0UF K L204 L40-2785-92 SMALL FIXED INDUCTOR(270NH)


C418 CK73HB1E562K CHIP C 5600PF K L206 ∗ L41-2775-38 SMALL FIXED INDUCTOR(27NH) AK2,AM2
C419 CK73HB1H102K CHIP C 1000PF K L211,212 L41-8268-14 SMALL FIXED INDUCTOR(8.2NH) AK,AM
C421 CK73GB1A105K CHIP C 1.0UF K L212 L41-6868-14 SMALL FIXED INDUCTOR(6.8NH) AK2,AM2
C424 CK73HB1H471K CHIP C 470PF K L212 L41-8268-14 SMALL FIXED INDUCTOR(8.2NH) BM

C426,427 CK73GB1A105K CHIP C 1.0UF K L214 L41-6868-14 SMALL FIXED INDUCTOR(6.8NH) AK2,AM2
C428,429 CK73HB1H102K CHIP C 1000PF K L214 L41-8268-14 SMALL FIXED INDUCTOR(8.2NH) AK,AM,BM
C430 CK73GB1H103K CHIP C 0.010UF K L215 L41-2285-03 SMALL FIXED INDUCTOR(220NH)
C431 CK73HB1C103K CHIP C 0.010UF K L220 L34-4602-05 AIR-CORE COIL
C432 CC73HCH1H050B CHIP C 5.0PF B L223 L34-4572-05 AIR-CORE COIL

C433,434 CC73HCH1H030B CHIP C 3.0PF B L224-226 L34-4564-05 AIR-CORE COIL


C435 CC73HCH1H050B CHIP C 5.0PF B L228,229 L41-6868-14 SMALL FIXED INDUCTOR(6.8NH) AK2,AM2
C440 CC73GCH1H1R5B CHIP C 1.5PF B L228,229 L41-8268-14 SMALL FIXED INDUCTOR(8.2NH) AK,AM,BM
C443 CK73GB1A474K CHIP C 0.47UF K L230 L41-3978-03 SMALL FIXED INDUCTOR(39NH) BM
C444,445 CC73GCH1H070B CHIP C 7.0PF B AK,AM L230 L41-5678-03 SMALL FIXED INDUCTOR(56NH) AK,AM,AK2

C445 CC73GCH1H200J CHIP C 20PF J AK2,AM2 L230 L41-5678-03 SMALL FIXED INDUCTOR(56NH) AM2
C450,451 CK73HB1C103K CHIP C 0.010UF K L250 L41-1875-38 SMALL FIXED INDUCTOR(18NH)
C452 CK73HB1H102K CHIP C 1000PF K L290 L41-3078-17 SMALL FIXED INDUCTOR(30NH) AK,AM,BM
C456 CK73GB1C104K CHIP C 0.10UF K L301 L92-0140-05 CHIP FERRITE
C901,902 CK73GB1A105K CHIP C 1.0UF K L302 L92-0149-05 CHIP FERRITE

TC1 ,2 C05-0245-05 CERAMIC TRIMMER CAPACITOR(10PF) L401 L92-0149-05 CHIP FERRITE


CN201 E23-1081-05 TERMINAL L402-404 L92-0138-05 CHIP FERRITE
CN401 ∗ E40-6363-05 FLAT CABLE CONNECTOR L410 L92-0138-05 CHIP FERRITE
CN402 ∗ E40-6430-05 FLAT CABLE CONNECTOR L411 L41-1875-38 SMALL FIXED INDUCTOR(18NH)
J301 E11-0457-05 PHONE JACK(2.5/3.5) X1 L77-1931-05 TCXO(12.8MHZ)

F401 ∗ F53-0324-05 FUSE(2.5A) X3 L77-1633-05 CRYSTAL RESONATOR(7.3728MHZ)


101 2A ∗ J30-1288-14 SPACER XF201 L71-0619-05 MCF(38.85MHZ)
CD201 L79-1582-05 TUNING COIL CP404 RK75HA1J473J CHIP-COM 47K J 1/16W
CF201 2A L72-0973-05 CERAMIC FILTER CP405-407 RK75HA1J102J CHIP-COM 1.0K J 1/16W
L1 L40-4791-37 SMALL FIXED INDUCTOR(4.700UH) R1 RK73HB1J223J CHIP R 22K J 1/16W

L3 L40-5681-86 SMALL FIXED INDUCTOR(0.56UH) R2 RK73HB1J103J CHIP R 10K J 1/16W


L5 L40-5681-86 SMALL FIXED INDUCTOR(0.56UH) R3 RK73HB1J333J CHIP R 33K J 1/16W
L6 ,7 L92-0138-05 CHIP FERRITE R4 RK73HB1J563J CHIP R 56K J 1/16W
L8 ,9 L41-1875-38 SMALL FIXED INDUCTOR(18NH) R5 RK73HB1J104J CHIP R 100K J 1/16W
L10 ,11 L41-1085-38 SMALL FIXED INDUCTOR(100NH) R6 RK73HB1J823J CHIP R 82K J 1/16W

L12 L92-0138-05 CHIP FERRITE R7 RK73HB1J101J CHIP R 100 J 1/16W


L13 ,14 L41-1085-38 SMALL FIXED INDUCTOR(100NH) R8 -11 R92-1368-05 CHIP R 0 OHM
L16 L40-1878-67 SMALL FIXED INDUCTOR(18NH) AK2,AM2 R12 RK73HB1J222J CHIP R 2.2K J 1/16W
L16 L40-2278-67 SMALL FIXED INDUCTOR(22NH) AK,AM,BM R13 R92-1252-05 CHIP R 0 OHM J 1/16W
L17 L40-2278-67 SMALL FIXED INDUCTOR(22NH) AK2,AM2 R14 RK73HB1J334J CHIP R 330K J 1/16W

L17 L40-2778-67 SMALL FIXED INDUCTOR(27NH) AK,AM,BM R15 RK73GB1J221J CHIP R 220 J 1/16W
L18 ,19 L41-2285-03 SMALL FIXED INDUCTOR(220N) R16 RK73GB1J561J CHIP R 560 J 1/16W
L20 ,21 L40-3391-86 SMALL FIXED INDUCTOR(3.3UH) R17 RK73HB1J101J CHIP R 100 J 1/16W
L22 L92-0138-05 CHIP FERRITE R18 RK73GB1J181J CHIP R 180 J 1/16W
L23 L41-2275-38 SMALL FIXED INDUCTOR(22NH) R19 RK73GB1J122J CHIP R 1.2K J 1/16W

L24 L92-0141-05 CHIP FERRITE R20 RK73HB1J100J CHIP R 10 J 1/16W


L25 L41-2275-38 SMALL FIXED INDUCTOR(22NH) R21 RK73GB1J681J CHIP R 680 J 1/16W
L100,101 L41-1575-38 SMALL FIXED INDUCTOR(15NH) R22 R92-1252-05 CHIP R 0 OHM J 1/16W
L102 L92-0138-05 CHIP FERRITE R23 RK73GB1J103J CHIP R 10K J 1/16W
L103,104 ∗ L41-8265-38 SMALL FIXED INDUCTOR(8.2NH) R25 RK73HB1J223J CHIP R 22K J 1/16W

L105 L40-1575-54 SMALL FIXED INDUCTOR(15NH) AK,AM,BM R26 RK73HB1J103J CHIP R 10K J 1/16W
L105 L40-2275-54 SMALL FIXED INDUCTOR(22NH) AK2,AM2 R27 RK73HB1J220J CHIP R 22 J 1/16W
L106 L92-0149-05 CHIP FERRITE R30 RK73HB1J333J CHIP R 33K J 1/16W
L107 L40-1263-92 SMALL FIXED INDUCTOR(1.2NH) R31 RK73HB1J474J CHIP R 470K J 1/16W
L109 L92-0149-05 CHIP FERRITE R32 RK73HB1J102J CHIP R 1.0K J 1/16W

AK : TK-3212 (K) AK2 : TK-3212 (K2) AM : TK-3212 (M) AM2 : TK-3212 (M2)
BM : TK-3217 (M) 21
TK-3212/3217
PARTS LIST
TX-RX UNIT (X57-7130-XX)
New New
Ref. No. Address parts Parts No. Description Destination Ref. No. Address parts Parts No. Description Destination

R33 RK73HB1J154J CHIP R 150K J 1/16W R219 RK73GB1J561J CHIP R 560 J 1/16W
R34 RK73HB1J474J CHIP R 470K J 1/16W R226,227 RK73GB1J102J CHIP R 1.0K J 1/16W
R35 ,36 RK73HB1J274J CHIP R 270K J 1/16W R228 RK73GB1J151J CHIP R 150 J 1/16W
R37 RK73HB1J101J CHIP R 100 J 1/16W R233 RK73HB1J104J CHIP R 100K J 1/16W
R38 RK73HB1J181J CHIP R 180 J 1/16W R236 RK73HB1J563J CHIP R 56K J 1/16W

R39 RK73HB1J151J CHIP R 150 J 1/16W AK,AM,AK2 R238 RK73HB1J104J CHIP R 100K J 1/16W
R39 RK73HB1J151J CHIP R 150 J 1/16W AM2 R239 RK73HB1J563J CHIP R 56K J 1/16W
R39 ,40 RK73HB1J151J CHIP R 150 J 1/16W BM R240 R92-1252-05 CHIP R 0 OHM J 1/16W
R40 RK73HB1J101J CHIP R 100 J 1/16W AK,AM,AK2 R241 RK73HB1J105J CHIP R 1.0M J 1/16W AK,AM,BM
R40 RK73HB1J101J CHIP R 100 J 1/16W AM2 R243,244 RK73HB1J105J CHIP R 1.0M J 1/16W

R41 RK73HB1J154J CHIP R 150K J 1/16W R248 RK73GB1J221J CHIP R 220 J 1/16W
R42 RK73HB1J103J CHIP R 10K J 1/16W BM R249 RK73GB1J220J CHIP R 22 J 1/16W
R42 RK73HB1J472J CHIP R 4.7K J 1/16W AK,AM,AK2 R251 RK73HB1J104J CHIP R 100K J 1/16W
R42 RK73HB1J472J CHIP R 4.7K J 1/16W AM2 R253 RK73HB1J104J CHIP R 100K J 1/16W
R43 RK73HB1J101J CHIP R 100 J 1/16W R254 RK73HB1J683J CHIP R 68K J 1/16W

R46 RK73HB1J103J CHIP R 10K J 1/16W R255 R92-1252-05 CHIP R 0 OHM J 1/16W
R47 RK73HB1J220J CHIP R 22 J 1/16W R256,257 RK73HB1J105J CHIP R 1.0M J 1/16W
R48 RK73HB1J331J CHIP R 330 J 1/16W R258 R92-0670-05 CHIP R 0 OHM
R49 RK73HB1J222J CHIP R 2.2K J 1/16W R301 RK73HB1J103J CHIP R 10K J 1/16W
R50 RK73HB1J472J CHIP R 4.7K J 1/16W R304 RK73HB1J273J CHIP R 27K J 1/16W

R100 RK73HB1J472J CHIP R 4.7K J 1/16W R305 RK73HB1J104J CHIP R 100K J 1/16W
R103 RK73GB1J473J CHIP R 47K J 1/16W R306 RK73HB1J102J CHIP R 1.0K J 1/16W
R105 RK73GB1J331J CHIP R 330 J 1/16W R307 R92-1368-05 CHIP R 0 OHM
R106 RK73GB1J220J CHIP R 22 J 1/16W R310 RK73GB1J394J CHIP R 390K J 1/16W
R107 RK73HB1J101J CHIP R 100 J 1/16W R311 RK73HB1J123J CHIP R 12K J 1/16W

R110 RK73GB1J331J CHIP R 330 J 1/16W R312 RK73GB1J334J CHIP R 330K J 1/16W
R111,112 R92-1252-05 CHIP R 0 OHM J 1/16W R313 RK73GB1J104J CHIP R 100K J 1/16W
R114 RK73GB1J124J CHIP R 120K J 1/16W R314 RK73GB1J103J CHIP R 10K J 1/16W
R115 RK73GB1J103J CHIP R 10K J 1/16W R315 RK73GB1J334J CHIP R 330K J 1/16W
R116 RK73GB1J220J CHIP R 22 J 1/16W R316 RK73GB1J124J CHIP R 120K J 1/16W

R121 RK73GB1J220J CHIP R 22 J 1/16W R317 RK73GB1J474J CHIP R 470K J 1/16W


R123 R92-0670-05 CHIP R 0 OHM R318 RK73GB1J122J CHIP R 1.2K J 1/16W
R124 RK73GB1J473J CHIP R 47K J 1/16W R319 RK73HB1J563J CHIP R 56K J 1/16W
R126 RK73GB1J222J CHIP R 2.2K J 1/16W R320 RK73HB1J332J CHIP R 3.3K J 1/16W
R127-129 RK73EB2ER39K CHIP R 0.39 K 1/4W R321 RK73HB1J224J CHIP R 220K J 1/16W

R130-135 RK73GH1J154D CHIP R 150K D 1/16W R322 RK73HB1J184J CHIP R 180K J 1/16W
R137 R92-0670-05 CHIP R 0 OHM R323 RK73HB1J563J CHIP R 56K J 1/16W
R138 RK73GB1J105J CHIP R 1.0M J 1/16W R324,325 RK73GB1J104J CHIP R 100K J 1/16W
R139 RK73GB1J473J CHIP R 47K J 1/16W R326 R92-1252-05 CHIP R 0 OHM J 1/16W
R140 RK73GB1J563J CHIP R 56K J 1/16W R327 RK73GB1J184J CHIP R 180K J 1/16W

R141 RK73GB1J104J CHIP R 100K J 1/16W R328 RK73GB1J103J CHIP R 10K J 1/16W
R142 R92-1252-05 CHIP R 0 OHM J 1/16W R329 RK73GB1J823J CHIP R 82K J 1/16W
R143 RK73GB1J104J CHIP R 100K J 1/16W R330 RK73HB1J332J CHIP R 3.3K J 1/16W
R145 R92-1252-05 CHIP R 0 OHM J 1/16W R331 RK73GB1J154J CHIP R 150K J 1/16W
R147 R92-1252-05 CHIP R 0 OHM J 1/16W R332 RK73GB1J153J CHIP R 15K J 1/16W

R190 RK73GB1J101J CHIP R 100 J 1/16W R334 RK73GB1J473J CHIP R 47K J 1/16W
R191,192 RK73GB1J271J CHIP R 270 J 1/16W R335 RK73GB1J222J CHIP R 2.2K J 1/16W
R193,194 RK73GB1J473J CHIP R 47K J 1/16W R336 RK73GB1J102J CHIP R 1.0K J 1/16W
R203 RK73HB1J184J CHIP R 180K J 1/16W R337 RK73GB1J151J CHIP R 150 J 1/16W
R206 RK73GB1J100J CHIP R 10 J 1/16W R338 RK73GB1J222J CHIP R 2.2K J 1/16W

R207 RK73HB1J472J CHIP R 4.7K J 1/16W R339 RK73GB1J471J CHIP R 470 J 1/16W
R208 RK73HB1J823J CHIP R 82K J 1/16W R340 RK73GB1J182J CHIP R 1.8K J 1/16W
R209 RK73HB1J272J CHIP R 2.7K J 1/16W R341 RK73GB1J103J CHIP R 10K J 1/16W
R210,211 RK73HB1J332J CHIP R 3.3K J 1/16W R342 RK73GB1J101J CHIP R 100 J 1/16W
R212 RK73HB1J823J CHIP R 82K J 1/16W R343 RK73GB1J474J CHIP R 470K J 1/16W

R213 RK73HB1J392J CHIP R 3.9K J 1/16W R344 RK73GB1J102J CHIP R 1.0K J 1/16W
R215 RK73HB1J101J CHIP R 100 J 1/16W R345,346 RK73GB1J101J CHIP R 100 J 1/16W
R216 RK73HB1J124J CHIP R 120K J 1/16W R347 RK73GB1J104J CHIP R 100K J 1/16W
R217 RK73HB1J472J CHIP R 4.7K J 1/16W R348 RK73GB1J563J CHIP R 56K J 1/16W
R218 RK73HB1J561J CHIP R 560 J 1/16W R349 RK73GB1J333J CHIP R 33K J 1/16W

AK : TK-3212 (K) AK2 : TK-3212 (K2) AM : TK-3212 (M) AM2 : TK-3212 (M2)
22 BM : TK-3217 (M)
TK-3212/3217
PARTS LIST
TX-RX UNIT (X57-7130-XX)
New New
Ref. No. Address parts Parts No. Description Destination Ref. No. Address parts Parts No. Description Destination

R350 RK73HB1J102J CHIP R 1.0K J 1/16W Q1 KTC4082 TRANSISTOR


R352 RK73HB1J104J CHIP R 100K J 1/16W Q2 2SC5108(Y) TRANSISTOR
R353 R92-1368-05 CHIP R 0 OHM Q3 ,4 2SK508NV(K52) FET
R354,355 RK73HB1J103J CHIP R 10K J 1/16W Q5 RT1P430U TRANSISTOR
R403 RK73GB1J101J CHIP R 100 J 1/16W Q6 2SC5108(Y) TRANSISTOR

R404 RK73HH1J474D CHIP R 470K D 1/16W Q7 RT1P430U TRANSISTOR


R405 RK73GB1J334J CHIP R 330K J 1/16W Q8 2SC4617(S) TRANSISTOR
R406 RK73HH1J474D CHIP R 470K D 1/16W Q9 2SC4619 TRANSISTOR
R407 RK73HB1J334J CHIP R 330K J 1/16W Q100 2SC4619 TRANSISTOR
R408 RK73HB1J473J CHIP R 47K J 1/16W Q101 2SK3077 FET

R409,410 R92-1368-05 CHIP R 0 OHM Q102 2SK2596 FET


R412 RK73HB1J473J CHIP R 47K J 1/16W Q103 2SK3476 FET
R413,414 RK73GB1J331J CHIP R 330 J 1/16W Q104 RT1N141U TRANSISTOR
R415,416 RK73GB1J473J CHIP R 47K J 1/16W Q105 2SK879(Y) FET
R417-420 RK73HB1J473J CHIP R 47K J 1/16W Q107 RT1N141U TRANSISTOR

R421,422 RK73HB1J102J CHIP R 1.0K J 1/16W Q108 2SK1824 FET


R423 R92-1368-05 CHIP R 0 OHM Q109 RT1P441U TRANSISTOR
R424,425 RK73HB1J473J CHIP R 47K J 1/16W Q202 RT1P441U TRANSISTOR
R435 RK73HB1J473J CHIP R 47K J 1/16W Q203 2SC4649(N,P) TRANSISTOR
R436 R92-1252-05 CHIP R 0 OHM J 1/16W Q204,205 3SK318 FET

R437,438 RK73HB1J473J CHIP R 47K J 1/16W Q301 RT1P141U TRANSISTOR


R447 RK73HB1J123J CHIP R 12K J 1/16W Q302 2SC4919 TRANSISTOR
R449,450 R92-1252-05 CHIP R 0 OHM J 1/16W AK2,AM2,BM Q303 RT1N441U TRANSISTOR
R451 RK73HB1J680J CHIP R 68 J 1/16W Q304 2SA1362(GR) TRANSISTOR
R452 RK73HB1J103J CHIP R 10K J 1/16W Q305 RT1N441U TRANSISTOR

R453 RK73HB1J223J CHIP R 22K J 1/16W Q306 CPH3413 FET


R456 R92-1252-05 CHIP R 0 OHM J 1/16W AK2,AM2 Q316 CPH3413 FET
R470 RK73HB1J102J CHIP R 1.0K J 1/16W Q401,402 RT1N141U TRANSISTOR
R901,902 RK73GB1J472J CHIP R 4.7K J 1/16W Q403 CPH3317 FET
VR1 R12-7491-05 TRIMMING POT.(68K) Q404,405 RT1P237U TRANSISTOR

S1 -3 S70-0414-05 TACT SWITCH Q407,408 2SK1830 FET


MIC1 2A ∗ T91-0648-05 MIC ELEMENT Q901 2SK1824 FET
D1 MA2S111 DIODE TH101 B57331V2104J THERMISTOR
D2 -9 HVC376B VARIABLE CAPACITANCE DIODE TH203 B57331V2104J THERMISTOR
D10 1SV278 VARIABLE CAPACITANCE DIODE

D11 MA2S111 DIODE


D101 HSC277 DIODE
D102 HZU5CLL ZENER DIODE
D103 HVC131 DIODE
D104 HSC277 DIODE

D106 HSC277 DIODE


D122 HVC131 DIODE
D202 HSC277 DIODE
D203-206 HVC355B VARIABLE CAPACITANCE DIODE
D210 HVC355B VARIABLE CAPACITANCE DIODE AK,AM,BM

D301,302 RB706F-40 DIODE


D303 DAN222 DIODE
D401 RB521S-30 DIODE
D402 1SR154-400 DIODE
IC1 MB15A02 MOS-IC

IC101 TA75W01FU MOS-IC


IC201 TA31136FN MOS-IC
IC301 AQUA-L MOS-IC
IC302 TA7368F MOS-IC
IC401,402 XC6204B502MR MOS-IC

IC403 BD4840FVE MOS-IC


IC404 BD4845FVE MOS-IC
IC405 ∗ 30620MCP-A00GP MICROPROCESSOR IC
IC406 AT24128N10SI27 ROM IC
IC407 TC7W74FU MOS-IC

AK : TK-3212 (K) AK2 : TK-3212 (K2) AM : TK-3212 (M) AM2 : TK-3212 (M2)
BM : TK-3217 (M) 23
TK-3212/3217
EXPLODED VIEW
A B

61
1 60
59 700
6 57 57

58
5
1 57

67
Ex2
Ex2 11 10

9 39
52 14
18
MIC1 33 17
31
E
101 19 15
Ex2
Ex2 62
23
21
Ex2
53
40
Ex2
2
TX-RX unit
36
56
28 4
CF201 38 B
C

12 C
A
51
71
50 66
30
22
32
27
35
2

34
3
Dx2

A :N14-0819-04
29 B :N14-0820-04
C :N30-2604-46
D :N30-2606-46
25
16 E :N83-2005-46
24
13
E

24 Parts with the exploded numbers larger than 700 are not supplied.
TK-3212/3217
PACKING
C D

7. INSTRUCTION MANUAL
(B62-1817-00) English/Spanish/French:
TK-3212(K,K2,M,M2) 73. AC ADAPTER
(B62-1818-00) Korean: (W08-0970-05):
TK-3217(M)) TK-3212(K,K2)
(W08-0971-05):
TK-3212(M,M2)
68. HELICAL ANTENNA
(T90-0798-25):TK-3217(M)
69. WHIP ANTENNA
43. PROTECTION BAG (T90-1039-15):TK-3212(K,M)
1 (T90-1040-15):TK-3212(K2,M2)
(H25-0085-04)

65. SCREW SET


(N99-2043-05)
46. HOLDER
(SP/MIC)
(J19-5472-03)

55. HANDSTRAP
(J69-0352-05):
3. CAP
TK-3217(M)
(SP/MIC)
(B09-0680-03)

42. CARTON BOARD 702.KNB-29N


(H13-2109-03) (Ni-MH BATTERY PACK)

2 41. PACKING FIXTURE


(H12-3179-05)

54. BELT CLIP


(J29-0713-03) 72. CHARGER
(W08-0969-05)

44. ITEM CARTON CASE


(H52-2071-02): TK-3212(K,K2,M,M2)
(H52-2072-02): TK-3217(M)

Parts with the exploded numbers larger than 700 are not supplied. 25
TK-3212/3217
ADJUSTMENT
Test Equipment Required for Alignment
Test Equipment Major Specifications
1. Standard Signal Generator Frequency Range 400 to 512MHz
(SSG) Modulation Frequency modulation and external modulation
Output -127dBm/0.1µV to greater than -47dBm/1mV
2. Power Meter Input Impedance 50Ω
Operation Frequency 400 to 512MHz
Measurement Range Vicinity of 10W
3. Deviation Meter Frequency Range 400 to 512MHz
4. Digital Volt Meter Measuring Range 10mV to 10V DC
(DVM) Input Impedance High input impedance for minimum circuit loading
5. Oscilloscope DC through 30MHz
6. High Sensitivity Frequency Range 10Hz to 1000MHz
Frequency Counter Frequency Stability 0.2ppm or less
7. Ammeter 5A
8. AF Volt Meter Frequency Range 50Hz to 10kHz
(AF VTVM) Voltage Range 1mV to 10V
9. Audio Generator (AG) Frequency Range 50Hz to 5kHz or more
Output 0 to 1V
10. Distortion Meter Capability 3% or less at 1kHz
Input Level 50mV to 10Vrms
11. Spectrum Analyzer Measuring Range DC to 1GHz or more
12. Tracking Generator Center frequency 50kHz to 600MHz
Output Voltage 100mV or more
13. 8Ω Dummy Load Approx. 8Ω, 3W
14. Regulated Power Supply 5V to 10V, approx. 3A
Useful if ammeter equipped

■ The following parts are required for Connect the power cable properly between the battery jig
adjustment installed in the transceiver and the power supply, and be sure
output voltage and the power supply polarity prior to switching
1. Antenna connector adapter the power supply ON, otherwise over voltage and reverse
The antenna connector of this transceiver uses an SMA connection may damage the transceiver, or the power supply
terminal. or both.
Use an antenna connector adapter [SMA(f) – BNC(f) or
SMA(f) – N(f)] for adjustment. (The adapter is not provided as Note: When using the battery jig, you must measure the
an option, so buy a commercially-available one.) voltage at the terminals of the battery jig. Otherwise, a slight
voltage drop may occur within the power cable, between the
2. Repair Jig (Chassis) power supply and the battery jig, especially while the
Use jig (part No.: A10-4086-03) for repairing the TK-3212/ transceiver transmits.
3217. Place the TX-RX unit on the jig and fit it with screws.
SCHEMATIC DIAGRAM
The jig facilitates the voltage check and protects the final
S
amplifier FET when the voltage on the flow side of the TX-RX
1.8M
R1

unit is checked during repairs.



100P/25V

470P/25V

100m/25V

3. Nut wrench
C1

C2

C3

In order to turn the volume nut and the channel selector +

nut, use a recommendation tool.


KENWOOD part No. : W05-1012-00 + Terminal
(Red)
– Terminal
(Black)
Power cable

4. Battery Jig (W05-1011-00) Power


supply

+ Terminal (Red)

– Terminal (Black)
26
TK-3212/3217
ADJUSTMENT
Frequency (MHz) M type (TK-3217)
Controls
Channel selector Channel No. RX Frequency TX Frequency
Power switch/ 1 460.050 460.100
Volume control 2 440.050 440.100
3 479.950 479.900
4 460.000 460.000
5 460.200 460.200
6 460.400 460.400

Microphone Signaling
Signaling No. RX TX
Speaker
1 None None
2 None 100Hz Square Wave
3 QT 67.0Hz QT 67.0Hz
4 QT 151.4Hz QT 151.4Hz
5 QT 250.3Hz QT 250.3Hz
6 DQT D023N DQT D023N
7 DQT D754I DQT D754I
8 DTMF 159D DTMF 159D
9 None DTMF tone 9
10 None MSK

■ Preparations for tuning the transceiver


Before attempting to tune the transceiver, connect the unit
PTT switch
Speaker/ to a suitable power supply.
Side 1 key Microphone Whenever the transmitter is tuned, the unit must be
jacks
Side 2 key connected to a suitable dummy load (i.e. power meter).
The speaker output connector must be terminated with a
8Ω dummy load and connected to an AC voltmeter and an
audio distortion meter or a SINAD measurement meter at all
times during tuning.

Adjustment Frequency
■ Frequency and signaling K, M type (TK-3212)
TEST CH
The transceiver has been adjusted for the frequencies RX Frequency TX Frequency
shown in the following table. When required, readjust them Center 470.050MHz 470.100MHz
following the adjustment procedure to obtain the frequencies Low 450.050MHz 450.100MHz
you want in actual operation. High 489.950MHz 489.900MHz
Low’ 460.050MHz 460.100MHz
Frequency (MHz) K, M type (TK-3212) High’ 480.050MHz 480.100MHz
Channel No. RX Frequency TX Frequency
1 470.050 470.100 K2, M2 type (TK-3212)
2 450.050 450.100 TEST CH
RX Frequency TX Frequency
3 489.950 489.900 Center 491.050MHz 491.100MHz
4 470.000 470.000 Low 470.050MHz 470.100MHz
5 470.200 470.200 High 511.950MHz 511.900MHz
6 470.400 470.400 Low’ 480.550MHz 480.600MHz
High’ 501.550MHz 501.600MHz
Frequency (MHz) K2, M2 type (TK-3212)
Channel No. RX Frequency TX Frequency
M type (TK-3217)
1 491.050 491.100 TEST CH
RX Frequency TX Frequency
2 470.050 470.100
Center 460.050MHz 460.100MHz
3 511.950 511.900
Low 440.050MHz 440.100MHz
4 491.000 491.000
High 479.950MHz 479.900MHz
5 491.200 491.200
Low’ 450.050MHz 450.100MHz
6 491.400 491.400
High’ 470.050MHz 470.100MHz

27
TK-3212/3217
ADJUSTMENT
Adjustment Points

AUX 5R BPF
BATT+ RSSI S1 S2 S3
SP– PTT SW1 SW2
SP+ CN13
5C ANT
PCTV B
TX-RX unit
SB Foil side VR1
5M
TX-RX unit
Component side TC1
RXD TC2
TXD J301
CV EXT. SP/EXT. MIC CV

BPF : Band-pass wave form test point VR1 : Frequency adjustment


CV : VCO lock voltage adjustment terminal TC1 : Transmit VCO lock voltage adjustment
TC2 : Receive VCO lock voltage adjustment
CV : VCO lock voltage adjustment terminal

Common Section
Measurement Adjustment Specifications/
Item Condition
Test equipment Terminal Parts Method Remarks
1.Setting 1) BATT terminal votage:7.5V
2) SSG standard modulation
[Wide] MOD:1kHz,DEV:3kHz
[Narrow] MOD:1kHz,DEV:1.5kHz
2.VCO lock 1) CH:High Power meter ANT TC2 3.4V(TK-3212(K,M)) ±0.1V
voltage DVM CV 3.0V(TK-3212(K2,M2)
RX TK-3217(M))
2) CH:Low Check 0.6V or more
3.VCO lock 3) CH:High TC1 3.1V(TK-3212(K,M)) ±0.1V
voltage PTT:ON 3.0V(TK-3212(K2,M2)
TX TK-3217(M))
4) CH:Low Check 0.6V or more
PTT:ON

Transmitter Section
Measurement Adjustment Specifications/
Item Condition
Test equipment Terminal Parts Method Remarks
1.Frequency 1) CH:High Frequency counter ANT VR1 High frequency Note: After replacing
Adjust 2) PTT:ON ±50Hz the TCXO(X1) align
frequency.
2.High power TEST CH: Low Power meter Programming 4.0W ±0.1W
Adjust Low’ Ammeter Software:KPG-100D 1.9 A or less
Center
High’
High
(5 points)
BATT terminal voltage:7.5V
PTT:ON
3.Low power TEST CH: Low 1.05W ±0.1W
Adjust Low’ 0.9 A or less
Center
High’
High
(5 points)
BATT terminal voltage:7.5V
PTT:ON

28
TK-3212/3217
ADJUSTMENT

Measurement Adjustment Specifications/


Item Condition
Test equipment Terminal Parts Method Remarks
4.Max deviation TEST CH: Center Power meter ANT Programming 4.2kHz ±80Hz
Adjust Low Deviation meter SP/MIC connector Software:KPG-100D (According to
[Wide] High Oscilloscope the lager +,–)
(3 points) AG
AG:1kHz/150mV AF VTVM
Deviation meter filter
LPF:15kHz
HPF:OFF
PTT:ON
[Narrow] TEST CH: Center 2.2kHz ±80Hz
PTT:ON (According to
the lager +,–)
5.VOX 1 TEST CH: Center
Writing AG:1kHz/45mV
6.VOX 10 TEST CH: Center
Writing AG:1kHz/3.0mV
7.DQT TEST CH: Center ANT Programming Make the
Balance Adjust Low Software:KPG-100D demodulation
[Wide] High wave into
(3 points) square waves
LPF:3kHz
HPF:OFF
PTT:ON
[Narrow] TEST CH:Center
PTT:ON
8.QT Deviation TEST CH: Center 0.75kHz ±40Hz
Adjust Low
[Wide] High
(3 points)
LPF:3kHz
HPF:OFF
PTT:ON
[Narrow] TEST CH: Center 0.35kHz ±40Hz
PTT:ON
9.DQT Deviation TEST CH: Center 0.75kHz ±40Hz
Adjust Low
[Wide] High
(3 points)
LPF:3kHz
HPF:OFF
PTT:ON
[Narrow] TEST CH:Center 0.35kHz ±40Hz
PTT:ON
10.DTMF Deviation TEST CH:Center 3.0kHz ±100Hz
Adjust LPF:15kHz
[Wide] HPF:OFF
PTT:ON
[Narrow] TEST CH:Center 1.5kHz ±100Hz
PTT:ON
11.MSK Deviation TEST CH: Center 3.1kHz ±100Hz
Adjust Low
[Wide] High
(3 points)
LPF:15kHz
HPF:OFF
PTT:ON
[Narrow] TEST CH:Center 1.5kHz ±100Hz
PTT:ON
29
TK-3212/3217
ADJUSTMENT
Receiver Section
Measurement Adjustment Specifications/
Item Condition
Test equipment Terminal Parts Method Remarks
REF -20.0 dBm MKR 470 MHz
1.BPF Wave (1)Center frequency Spectrum ANT Programming Adjust the 10 dB/ A_View Norm B_Blank Norm -54.63 dBm
CENTER
470 MHz
Adjust Spectrum analyzer setting analyzer BPF Software: waveform as
Center-f : 470MHz KPG-100D shown to the
TK-3212 Span : 200MHz right.
(K,M) RBW : 30kHz
CENTER 470 MHz SPAN 200.0 MHz
∗RBW 30 kHz VBW 30 kHz SWP 450 ms ATT 5 dB
VBW : 30kHz REF -20.0 dBm MKR 490 MHz
10 dB/ A_View Norm B_Blank Norm -53.38 dBm
ATT : 5dB CENTER
490 MHz
(2)High-edge frequency
Spectrum analyzer setting
Center-f : 490MHz
CENTER 490 MHz SPAN 200.0 MHz
∗RBW 30 kHz VBW 30 kHz SWP 450 ms ATT 5 dB

(3)Low-edge frequency REF -20.0 dBm MKR 450 MHz


10 dB/ A_View Norm B_Blank Norm -53.85 dBm
CENTER
Spectrum analyzer setting 450 MHz

Center-f : 450MHz

CENTER 450 MHz SPAN 200.0 MHz


∗RBW 30 kHz VBW 30 kHz SWP 450 ms ATT 5 dB

(1)Center frequency REF -20.0 dBm MKR 491 MHz


10 dB/ A_Write Norm B_Blank Norm -59.50 dBm
CENTER
TK-3212 Spectrum analyzer setting 491 MHz

(K2,M2) Center-f : 491MHz


Span : 200MHz
RBW : 30kHz
CENTER 491 MHz SPAN 200.0 MHz
∗RBW 30 kHz ∗VBW 30 kHz SWP 450 ms ∗ATT 5 dB
VBW : 30kHz REF -20.0 dBm MKR 512 MHz
10 dB/ A_Write Norm B_Blank Norm -60.22 dBm
ATT : 5dB CENTER
512 MHz
(2)High-edge frequency
Spectrum analyzer setting
Center-f : 512MHz
CENTER 512 MHz SPAN 200.0 MHz
∗RBW 30 kHz ∗VBW 30 kHz SWP 450 ms ∗ATT 5 dB

(3)Low-edge frequency REF -20.0 dBm MKR 470 MHz


10 dB/ A_Write Norm B_Blank Norm -62.44 dBm
CENTER
Spectrum analyzer setting 470 MHz

Center-f : 470MHz

CENTER 470 MHz SPAN 200.0 MHz


∗RBW 30 kHz ∗VBW 30 kHz SWP 450 ms ∗ATT 5 dB

(1)Center frequency REF -20.0 dBm MKR 460 MHz


10 dB/ A_Write Norm B_Blank Norm -60.05 dBm
CENTER
TK-3217 Spectrum analyzer setting 460 MHz

(M) Center-f : 460MHz


Span : 200MHz
RBW : 30kHz
CENTER 460 MHz SPAN 200.0 MHz
∗RBW 30 kHz ∗VBW 30 kHz SWP 450 ms ∗ATT 5 dB
VBW : 30kHz REF -20.0 dBm MKR 480 MHz
10 dB/ A_Write Norm B_Blank Norm -58.73 dBm
ATT : 5dB CENTER
480 MHz
(2)High-edge frequency
Spectrum analyzer setting
Center-f : 480MHz
CENTER 480 MHz SPAN 200.0 MHz
∗RBW 30 kHz ∗VBW 30 kHz SWP 450 ms ∗ATT 5 dB

(3)Low-edge frequency REF -20.0 dBm MKR 440 MHz


10 dB/ A_Write Norm B_Blank Norm -58.32 dBm
CENTER
Spectrum analyzer setting 440 MHz

Center-f : 440MHz

CENTER 440 MHz SPAN 200.0 MHz


∗RBW 30 kHz ∗VBW 30 kHz SWP 450 ms ∗ATT 5 dB

30
TK-3212/3217
ADJUSTMENT

Measurement Adjustment Specifications/


Item Condition
Test equipment Terminal Parts Method Remarks
2.Sensitivity TEST CH: Low SSG ANT Check 12dB SINAD or more
check Center DVM
[Wide] High Oscilloscope
SSG otuput:–117 dBm(0.3µV) AF VTVM
SSG MOD:3.0kHz
[Narrow] TEST CH:Center
SSG otuput:–115 dBm(0.4µV)
SSG MOD:1.5kHz
3.SQL1 TEST CH: Center Programming Write Squelch open
(Threshold) Low Software:
writing High KPG-100D
[Wide] SSG otuput:–123 dBm(0.16µV)
SSG MOD:3.0kHz
[Narrow] TEST CH: Center
SSG otuput:–122 dBm(0.18µV)
SSG MOD:1.5kHz
4.SQL9 TEST CH: Center
(Tight) Low
writing High
[Wide] SSG otuput:–117 dBm(0.3µV)
SSG MOD:3.0kHz
[Narrow] TEST CH: Center
SSG otuput:–116 dBm(0.35µV)
SSG MOD:1.5kHz
5.BATT BATT terminal voltage:5.75V DVM ANT Write BATT terminal
Detection BATT terminal voltage:5.75V
Writing

31
A B C D E F G H I J

1 TK-3212/3217 PC BOARD

2 TX-RX UNIT (X57-7130-XX) Component side view (J72-0968-09)


-10 : TK-3212 (K,M) -11 : TK-3212 (K2,M2) -21 : TK-3217 (M)

3
FUSE TH203 C430 L402
AUX

CP407
5R

R203

R213
F401 C201 L404 BPF
CP406

Q202
R415

CP404

R143
C405
L401

C401 75 51 R211

R206
R416 76 50 C215 C217
4 C402
SP–
C214
RSSI
SP+
BATT+

CP405
IC405
5C

1 GND
PCTV

NC
SB
5M
R406
C415
R404
C431

C
C456

6
L403

100 26
1 25

5M
IC404
Q408 S

4 3 R422 R409 R419


C411

7 R410
C435

5 1
D
R405

C419 R301
D401

R407
C410

C302
R354 R304

C301
Q407
S
G

IC403 1 4
R423

C433 C434
D

Q302
C351
C352

3 5 C432
R328

C333 C418 R307 R306


8
C306

R355
C318

Q901

C332
S
G

C354
R332
R311

16 10
D303

C314

+
+ 17 9
C308
C307

R353 C310
R901 C901
D302 R312
C316

C311 Q8
R310

C309

IC301 R902
C312

R316

R315
R318

L12
R25
R30
R31

9 R314 C319
R42
C315

25 1
C321

D301
R313

C313

C320

26 32 C77
R323

C317 R317 C902


C331

C45
C350

C324 D11
R321 C322

R320

R331 C323 R26


Q301

C325 R319
C326
R327

R326

R322
R325

R324
C328
C304

C39

C41
R330
R305

C330 R329 C329 CV


10 C327

11

Ref. No. Address Ref. No. Address Ref. No. Address Ref. No. Address
IC101 4N Q105 5L Q304 7Q D102 5M
IC301 9D Q107 5L Q305 8P D301 9B
12 IC302 9P Q108 4M Q306 8Q D302 9B
IC403 8B Q109 4M Q316 9O D303 8A
IC404 7B Q202 4F Q407 8D D401 7A
IC405 5D Q301 10E Q408 7D D403 8R
Q8 9J Q302 8B Q901 8F D404 8R
13
Q104 5M Q303 8O D11 9J

32
14
J K L M N O P Q R S

PC BOARD TK-3212/3217 1

TX-RX UNIT (X57-7130-XX) Component side view (J72-0968-09) 2


-10 : TK-3212 (K,M) -11 : TK-3212 (K2,M2) -21 : TK-3217 (M)

R438 J72-0968-09
3
R437

C424

R139

R134

R133
BPF

R403

R436
C406
5 4 R412 CN13
R141

C148
Q108 ANT
R408

C138
IC101 C403
G 4
R138
SP– R131 C408
R142

D 8 1
MIC1 S

1 B

8 GND
– + Q109 C140

SB
AFI
AFO
GND
UP
DOWN
R140

R132

R130
SP+ C146
R126

L111
R135
Q107
Q104 D102
R127
CN401
R121

5
D
S
10 GND

+ C126 R128
Q105
1 GND
NC
SB
5M
GND
DI
CL
CE
DO

B R129
CN402

SB
6

C334
R334

Q304
R335 7
R336

C335
R344

R338

C340

R341 C336

R343
R350
C356

Q303
D404
R421

R348
R347

R414
8
Q305

G
C343
L301

R413
R346 Q306 D
D403
5

S
IC302

Q8 MICIN MIC +
C80

R349

OPT
5MS
G
S
Q316

DET
C345

10
D

R42 + 9
R339 R340
C79

C77 RXD
SPO
R345

+ C344 C338
D11 TXD
C342

PTT/RXD
SPI TXD
C346

AE
L302 NC
10

11
Component side
Layer 1
Layer 2
Layer 3
Layer 4 12
Foil side

13

33
14
A B C D E F G H I J K L M N O P Q R S

1 TK-3212/3217 PC BOARD PC BOARD TK-3212/3217 1

2 TX-RX UNIT (X57-7130-XX) Component side view (J72-0968-09) TX-RX UNIT (X57-7130-XX) Component side view (J72-0968-09) 2
-10 : TK-3212 (K,M) -11 : TK-3212 (K2,M2) -21 : TK-3217 (M) -10 : TK-3212 (K,M) -11 : TK-3212 (K2,M2) -21 : TK-3217 (M)

J72-0968-09

R438
3 3

R437
FUSE TH203 C430 L402 C424
AUX

CP407
5R

R203

R213

R139

R134

R133
F401 C201 L404 BPF
CP406

Q202

R403

R436
R415

CP404

R143
C405 C406
CN13
L401

75 51 5 4 R412
R211 R141

C148
C401 ANT

R206
Q108 R408

C138
76 50 C215 C217 IC101 C403
4 C402 R416 G 4

R138
SP– R131 C408

R142
C214 D 8 1
MIC1 S

1 B

8 GND
RSSI C140
– + Q109

SB
AFI
AFO
GND
UP
DOWN
R140

R132

R130
C146
SP+

R126

L111
BATT+ R135
Q107
Q104 D102
R127
CN401

R121

G
5 5

CP405
IC405

D
S
5C

10 GND
+ C126 R128

Q105
1 GND
PCTV

NC
SB
5M
GND
DI
CL
CE
DO
B R129
R406
C415
R404
C431

CN402
C456

6 SB
6
L403

100 26

C334
1 25
R334
5M
IC404
Q408 S

4 3 R422 R409 R419

Q304
C411

7 R410 7
C435

5 1 R335
D
R405

C419 R301
D401

R336

C335
R344

R338
R407
C410

C302
R354 R304

C301
Q407

C340
S
G

IC403 1 4 R341 C336


R423

R343
C433 C434
D

R350
C356
Q302 Q303
C351
C352

3 5 C432 D404

R421
R348
R328

R347
C333 C418 R307 R306 R414
8 8
C306

Q305
R355 G

C343
L301
C318

Q901

C332 R413
S
G

C354 Q306 D
R332
R311

16 10 R346
D303

C314

+ D403

1
+ 17 9
C308
C307

R353 C310 S
R901 C901

IC302
D302 R312
C316

C311 Q8 MICIN MIC +

C80

R349
OPT
R310

C309

IC301 R902
C312

5MS
R316

G
S
Q316
R315 DET

C345
R318

10
L12

D
R25
R30
R31

6
9 R314 C319
R42 + 9
C315

25 1
C321

D301 R339 R340

C79
R313

C313

C320

26 32 C77 RXD
R323

C317 R317 SPO


C902
C331

C45

R345
C350

+ C344 C338
C324 D11 TXD
R321 C322

R320

R331 C323 R26


Q301

C325 R319

C342
C326 PTT/RXD
TXD
R327

R326

R322
R325

R324
C328

SPI
C304

C39

C41
R330
R305

C346
C330 R329 C329 AE
C327 CV L302 NC
10 10

11 11
Component side
Ref. No. Address Ref. No. Address Ref. No. Address Ref. No. Address Layer 1
IC101 4N Q105 5L Q304 7Q D102 5M Layer 2
IC301 9D Q107 5L Q305 8P D301 9B Layer 3
12 IC302 9P Q108 4M Q306 8Q D302 9B Layer 4 12
IC403 8B Q109 4M Q316 9O D303 8A Foil side
IC404 7B Q202 4F Q407 8D D401 7A
IC405 5D Q301 10E Q408 7D D403 8R
Q8 9J Q302 8B Q901 8F D404 8R
13 13
Q104 5M Q303 8O D11 9J

32 33
14 14
A B C D E F G H I J

1 TK-3212/3217 PC BOARD

2 TX-RX UNIT (X57-7130-XX) Foil side view (J72-0968-09)


-10 : TK-3212 (K,M) -11 : TK-3212 (K2,M2) -21 : TK-3217 (M)

J72-0968-09
D104
R256

C270 D205
3

R255
C268
S1 S2 S3
PTT SW1 SW2
L228

C263
R254

C266

R248
C292
C157
R253
C156 L223
4 1 C254

R251
C168 C267 Q205 C251
C159

D204

C237
R228

C238
D203

L230
3 2 C348
4
D106

R244
R243
C158 R145 C247
C262

D210
C164

C161

C271 R257
L226
C166

R249

C274

D206

R241
C269
C265

L229

L212
C276

C255

C250
L224

D122

D103
C160

R147 or C171
L215 L211

C257
C24

L214
C258

C259
L410
C273

C272
C245 R240 R2

C244
C249
C275 R258
L225 C256 + C253 C252 C2
L110 C169
C154 R450 or C248 R449 or C246
5
C152

C151

C163 R191
C135

C133

C191

C134

C136
C130

C111
R192

C116
L106

L250
R124

C129

C127

C125

C122

C113
L102
R137
L109
R194 R110 R106
L103 R112
L220

6 L101

L105

R105
L100
R190

C123

C110
R111

C112
L107

Q101
4 1

3 2
L104
C293 S
C107

R107
C108 Q100
D Q103 G R123 C190
C444 R103
R452 R453

R116

R114
C128

G
D

S Q102
7
C132

S C124
C445
TH101

R148 C119
R115

R193
C142

R32
C70
Q402 L22
C145

Q5

R36
R35
C64
8

C75

R34
Q401
C60

D
C72
R40
C59

L19
R337

D10
R342

OPT C69
MIC MICIN 5MS C62
+ DET

C54
L16
C339

J301 TC1
9
C341

EXT. SP/EXT. MIC

SPO C52
L13 D6
TXD
PTT/RXD D7
SPI
NC AE
10

11

Ref. No. Address Ref. No. Address Ref. No. Address Ref. No. Address Ref. No. Address Ref. No. Address
IC1 9O Q3 9M Q102 7G Q404 8R D7 10J D122 4D
IC201 5N Q4 8J Q103 7F Q405 9R D8 10L D202 6K
12 IC401 9S Q5 8I Q203 4N D1 10Q D9 10L D203 4H
IC402 8S Q6 8K Q204 4K D2 9K D10 8J D204 4G
IC406 5Q Q7 10L Q205 4G D3 10M D101 6K D205 3F
IC407 8Q Q9 6L Q401 8B D4 9K D103 4D D206 4F
Q1 7O Q100 7J Q402 8B D5 10L D104 3C D210 4J
13
Q2 8L Q101 6I Q403 8R D6 9J D106 4D D402 4R

34
14
J K L M N O P Q R S

PC BOARD TK-3212/3217 1

TX-RX UNIT (X57-7130-XX) Foil side view (J72-0968-09) 2


-10 : TK-3212 (K,M) -11 : TK-3212 (K2,M2) -21 : TK-3217 (M)

C225
S3 CN201 R470
SW2
CD201
C232
C234
C236

R215
XF201
C231
L202

R226 D402
C237
R228

C238

R218
C224
L204

7 R227 L201 4
Q204

R216
Q203
D210

L203

R219

C228 C440 C219


C220
1 4

2 3
R238 R239

L211 C241
R417
R240 R233
16
C244

9
R236

C216
C239

C230 C207 R210


46 R418 1 8
5
IC201

R207
C206 R208
L290 or L206 R209
C240

IC406

R212
C208
C111

C233
1

8
C210
L250

C218

4 5

R435
C222

+
C290

C291

C211 R447

C209
R106
C213 R424
C34

R1
R217 R50 C35 C1 6
R105

R425
L100

D202

R2
C106

R420
C87

L5 C2
C25

R3
Q9 C221
D101
C100

R48 C14
R7

R17
R49

R100
C24

C3
L25

07 C85 C12 L7 C26


C102
C101

Q100
R14

C84 R46
C86

L3
C5

R103 L411 R47 R4


R6

C83
VR1 X3
7
Q1
X1

C43 C40

C450 C451 C452


L9
R32
C48

C427
C70

C443
C76

L22
Q2

L8 C38

Q404
C18

1
4
C50 C9
C17

C421
R33

IC407
C426

R451
R36
R35

L1

R12
C42

C29

C64 R43 C78 C15

Q403
L20 8
R34

4 3
R27
C44

8
R13 C16
C60 L23 C66 R38
IC402

D
D

S
Q4 G

C59 R41 Q6 S
L19

5 1

S
R15
C65
D10

C73 C74 C13


Q3 G

Q405
+ R8
R16

C22 C409
C62 C67 D L6
C61
L18
L21

R39 L17 + + 4 3
R20 C428
C54

TC1
9
10

C63 C27 + R18 IC401


C10

C21

C19
C33

C58 TC2
C55

C56
R37

C68 C357 5 1
R19
IC1

R352
D4
D2

L13 D6 C71 +
C32 R5 C429 C407
C49

R21
C4

L14
Q7

D5

C47
C90

D7 R9 C11
11

20
D3

C417

L10 L24
D1
R22

D8 R10 C8
C6

R23 CV L11 R11 C7


D9 10

11
Component side
Layer 1
Layer 2
Layer 3
Layer 4 12
Foil side

13

35
14
A B C D E F G H I J K L M N O P Q R S

1 TK-3212/3217 PC BOARD PC BOARD TK-3212/3217 1

2 TX-RX UNIT (X57-7130-XX) Foil side view (J72-0968-09) TX-RX UNIT (X57-7130-XX) Foil side view (J72-0968-09) 2
-10 : TK-3212 (K,M) -11 : TK-3212 (K2,M2) -21 : TK-3217 (M) -10 : TK-3212 (K,M) -11 : TK-3212 (K2,M2) -21 : TK-3217 (M)

J72-0968-09
D104
R256

C270 D205
3 3

R255
C268

C225
S1 S2 S3 CN201 R470
PTT SW1 SW2
L228
CD201

C263

C232
C234
R254

C266

C236
R248
C292

R215
C157
R253
C156 L223 XF201
C254

C231
L202
4 1 R226 D402

R251
C168 C267 Q205 C251
C159

D204

C237
R228

C238

R218
C224
D203

L230

L204
3 2 C348
4 4
D106

R244
R243
C158 R145 C247 R227 L201

Q204

R216
Q203
C262

D210

L203
C164

C161

R219
C271 R257
L226
C166

R249

C274
C228

D206
C440 C219

R241
C269
C265 C220

L229

1 4

2 3
L212
C276

C255

C250
L224

D122

D103
C160

R147 or C171
L215

R238 R239
L211

C257
C241

L214
C258 R417

C259
L410
C273

C272
C245 R240 R233

16
C244

9
C249

R236
C275

C216
R258

C239
L225 C256 + C253 C252 C230
L110 C169
R450 or C248 R449 or C246 C207 R210 R418 1 8
C154
5 5

IC201

R207
C206 R208
C152

R209
C151

C163 R191 L290 or L206

C240
IC406
C135

C133

C191

C134

C136

R212
C208
C130

C111
R192 C233

8
C116
L106
C210

L250
R124

C218
4 5

C129

C127

C125

C122

C113

R435
L102

C222
R137 +

C290

C291

C211
L109 R447

C209
R194 R110 R106
L103 R112 C213 R424

C34

R1
L220

R217 R50
6 L101 C35 C1 6

L105

R105
R425

L100
D202

R2
R190

C123

C110

C106
R111 R420

C112

C87
L5 C2

C25

R3
Q9 C221
D101

C100
L107

Q101
4 1

3 2
L104
C293 S R48 C14

R7

R17
R49
R100

C24
C3

L25
C107 C85 L7

R107
C12 C26
C102

C101
C108 Q100

R14
R123 C190 C84 R46

C86
D Q103 G L3

C5
C444 R103 L411 R4
R452 R453 R47

R6
C83

R116

R114
C128 VR1 X3

G
D

S Q102
7 7
C132

S C124

Q1
X1
C445
TH101

R148 C119
R115

R193
C142 C43 C40

C450 C451 C452


L9

R32
C48
C427

C70
C443

C76
L22

Q2
Q402 L8 C38

Q404
C18

1
C145

4
C50 C9

C17
C421

R33

IC407
Q5 C426

R451
R36
R35

L1

R12
C42

C29
C64 R43 C78 C15

Q403
8 L20 8

C75

R34
4 3

R27
C44

8
Q401 R13 C16
C60 L23 C66 R38
IC402

D
D

S
C72
R40

Q4 G
C59 R41 Q6 S

L19
5 1

G
R337

S
R15

C65
D10
C73 C74 C13
Q3 G
R342

C69

Q405
+ R8

R16
OPT C22 C409
MIC MICIN 5MS C62 C67 D L6
DET

C61
+

L18
L21
R39 L17 + + 4 3

C428
R20

C54
L16
C339

J301 TC1
9 9

10

1
C63 + R18
C341

C27 IC401

C10

C21
EXT. SP/EXT. MIC

C19
C33
C58 TC2

C55

C56
R37
C68 C357 5 1
R19

IC1
SPO C52 R352

D4
D2
L13 D6 C71 +
C32 R5 C429 C407

C49
R21

C4
TXD L14

Q7

D5
PTT/RXD C47

C90
D7 R9 C11

11

20
SPI

D3

C417
L10 L24

D1
R22
D8 R10 C8
AE

C6
NC R23 CV L11 R11 C7
10 D9 10

11 11
Component side
Ref. No. Address Ref. No. Address Ref. No. Address Ref. No. Address Ref. No. Address Ref. No. Address Layer 1
IC1 9O Q3 9M Q102 7G Q404 8R D7 10J D122 4D Layer 2
IC201 5N Q4 8J Q103 7F Q405 9R D8 10L D202 6K Layer 3
12 IC401 9S Q5 8I Q203 4N D1 10Q D9 10L D203 4H Layer 4 12
IC402 8S Q6 8K Q204 4K D2 9K D10 8J D204 4G Foil side
IC406 5Q Q7 10L Q205 4G D3 10M D101 6K D205 3F
IC407 8Q Q9 6L Q401 8B D4 9K D103 4D D206 4F
Q1 7O Q100 7J Q402 8B D5 10L D104 3C D210 4J
13 13
Q2 8L Q101 6I Q403 8R D6 9J D106 4D D402 4R

34 35
14 14
A B C D E

TK-3212/3217 SCHEMATIC DIAGRAM


1 TX-RX UNIT (X57-7130-XX)
5C
R9 0

L6
R10 0
R11 0

1000p
C33
R20
20

19
18
17

16
15

14

13
12

11

10
100p
100p
100p

R
NC5
P

FOUT
NC4

FC

LE
DATA

NC3

CLK
PLL SYSTEM

C7
C8
C11

OSCOUT
IC1

OSCIN
MB15A02

GND
VCC
NC1

NC2

FIN
DO
VP

LD
4.82V

2
3
4

6
7
8

9
10
R8
C29
0
470p
4.76V

10u6.3
10u6.3
R15

C21
C13
C10

C19

0.1u
0.1u
220

2
RIPPLE

1000p
100
R7
100k

C16
R5
FILTER
D1

1000p
0.01u
MA2S111 C4 VR1 68k

0
R12-7491-05

L7
0.01u

C6

0.1u

C14
X1

C12

R13
L77-1931-05

82k
R6
R1 R2 R3 C3 1 4 4.72V
VC VCC
22k 10k 33k 1u 12.8MHz
2 3 L1 R12

3300p

6800p

1000p
OSCIN

C2

C5
C1

56k
R4
GND oUTPUT
4.7u 2.2k

C9
LCD ASSY (B38-0906-15)

C15

10p
10p
TXCO

LCD
QTTCXO
PLL_UL
3 PLL_STB
PLL_DAT
PLL_CLK
5C
L401 F401
BATT B
F53-0324-05

1000p
C401

C405
C402
D402

100p
470p
BATT 2.5A 1SR154-400
REVERSE
CN401 PROTECTION
E40-6363-05 1 B

2 SB EN1
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S23
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33

AFI
C1
C2
C3
C4

3
S1
S2
S3
S4
S5
S6
S7
S8
S9

EN2
1 37 4 AFO R412 47k
5 GND R408 47k
6 UP

4700p
C406

4700p
C403

C408
0.1u
7 DOWN

8 GND

R404
4

470k(D)
R:3.70V
100

470k(D)

470p
C415

C456
R406

0.1u
T:3.57V
0

IC402
R436
R403

5V PROTECTION
XC6204B502MR 5.00V
D401
RB521S-30 1 5
VIN VoUT
R:7.56V 2
T:7.26V VSS
3 4
CE NC IC401,402
C409

VOLTAGE
1u

REGULATOR/5V
IC401
XC6204B502MR
R:7.28V 4.96V
T:6.80V 1 5
VIN VoUT
32

31
30

29
28
27

26
25
24
23

22
21
20

19
18

17

2
C417

VSS
1u

33 16 3 4
CE NC
34 15
C407

1000p

35 14

5 36 13
VOLTAGE DETECTOR/RESET
37 12
IC403
11 BD4840FVE

10 R407 1 5
VoUT VDD
330k
C410

40 LCD DRIVER 9 2
1u

SUB
PT6554LQ 3 4
41 8
NC GND
5600p
C418

42 7

43 6

44 5
VOLTAGE
45 DETECTOR/INT

46 IC404
CN402 BD4845FVE
47 E40-6430-05
R405 1 5
GND 1 VoUT VDD
330k
1000p
C411

10 2
NC 2 SUB
50

9 3 4
SB 3 NC GND
1000p
C419

8
6 7
5M 4
BATT
RESET
INT
GND 5 5M
C 6
DI 6 DI
5
CL 7 CL
B
4
CE 8 CE
3
A DO 9 DO
2
GND 10
S 1 SB

7
36
X57-713 1/4
F G H I J

SCHEMATIC DIAGRAM TK-3212/3217


TX-RX UNIT (X57-7130-XX)
5C
D2,4,6,7 L19
C40 CV
FREQUENCY D6 * R40 RF BUFFER AMP

R32
220n

1k

C69
VCO OSCILLATION (TX)

470p

C72

0.1u
3p CONTROL HVC376B T:3.37V Q6
2.74V

R23

10k
C43 L9 /TX VCO 0.72V 2SC5108(Y) C78
L8
L24
18n 10p 18n
L10 D7
* C52 * L16 * C64 C73
33p

470p
C48
100n
C38

C42
0.5p

150k
R33
HVC376B
5p

5p
VCO/TX

C59

22n
L23
R41
1p
(B)

* C54

150k
HVC376B
HVC376B

3.3u
L21
C50 Q4
2SK508NV(K52) 3.7V

C60

1p
100p

100n
Q2

C47
10p

L13
2SC5108(Y)

1000p
C76

R43
Q5

100
* C67
C62

R39
TC1

10p

150
PLL IC F_IN AMP

2p
1SV278
470p
RT1P430U

D10
R27

C44

D4
D2
22
R:4.97V
T:0.58V

1000p
C75
TX MODULATION MODULATOR DC SW/TX VCO
R16 R21 R22
R25 R26 C45 R31 L12 R34 R36 L22
560 680 0
R18
0.33u35

180

270k
0.1u35

22k 10k 1u 470k 470k 4.0V

C70
270k

470p
C32
C22

R35
R:0.59V

3300p

6800p
C39
C902

C41
R30 T:4.94V
D3,5,8,9
R19

3.3u16 1.2k

1u 33k

1000p
R:3.4V

C90
FREQUENCY
L18 R37 RIPPLE
CONTROL Q7 FILTER
C27

/RX VCO RT1P430U


D8 220n 100 Q8

C71
100p

470p
C68
C63

0.1u
VCO OSCILLATION (RX) DC SW/RX VCO 2SC4617(S)
L11 HVC376B
D9 C74
* C65

MA2S111
100n
* C55 * L17

R42
470p

470p
C77

C80
D11
HVC376B
HVC376B
0.5p

*
HVC376B

* C58
4.9V Q3 VCO/RX

L20
3.3u
R17 2SK508NV(K52)

100n
C49

100p

L14

10u6.3
C79
100 CURRENT
1000p

* C56

* C61

* C66
560n

STEERING

TC2

R38
C24

180
10p
L3

D3
D5
0.71V DCSW
C17 C25 C34 APCSW
OSCIN R14 OSCIN
5C
47p 330k TRIPLER 2p 1000p B
C26

560n
C35

5T
C18

18p

30p

27p
L5

Q1
KTC4082 5R

QTTCXO
PLL_UL
PLL_STB
PLL_DAT
PLL_CLK
5C
B

CP405

1Kx2
EN1
EN2

T:4.99V

R447
R418

R435
R417

47k

47k
47k

12k
5T SW
Q403
CPH3317
RX_W/N
C426
C443

0.47u

1u

R421

1k
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
R:5.01V
CP406
EN1

RX_W/N
VCC
PLL_CLK
PLL_DAT
PLL_STB
PLL_UL
GND
TX_SW
RX_SW
TX_W/N
DCSW

APCSW
GND
RxD
TxD
QTTCXO
PTT
Q404 51 TX_W/N
5R SW 1Kx2 25
RT1P237U DTMF
52 24 DTRLOADN
53 OPTDET 23 STD
C421

C427

DO DTRLOADN STD
1u

1u

CP407 54 AF_CONT 22
CE QTVCO DIR
1Kx2 DIR
55 21 TDATA/DTRCLK
CL TDATA/DTRCLK
56 20 DI/O
DI DI/O
Q405 57 19 SCLK
5C SW RT1P237U SCLK
R:4.83V 58 18 ROF/FD
RDF/FD
4.95V 59 17 TCLK/DTRDO
TCLK/DTRDO
C428
C429

1000p

1000p

60 16
VCC INT
61 15 R419
L402 C430 VCC
62 MICROPROCESSOR 14 47k
VSS VCC
0.01u 63 IC405 13 XIN
GND XIN
64 30620MCP-A00GP 12
GND VSS
R413

65 11
R414

XOUT
330
330

CP404 XOUT
47Kx2 66 10
LED/RED RESET
LED/GREEN 67 9
D403 D404 68 8 BSHIFT
B30-2156-05 B30-2157-05 AUX R470 BSHIFT R420
69 7
AUX GND
1k 70 6 47k
ON:4.92V ON:4.92V BYTE
OFF:0.01V OFF:0.01V 71 5 EEPCLK
EN2 EEPCLK
72 4 EEPDAT
LEDTX EEPDAT
73 3
LEDRX
QT/DQT_IN

MIC_MUTE

PTT SIDE1 74 2
PF1
TH_DET

DTMF
75 1
C424

SIDE2
BUSY

AVCC
VREF
AVSS
5R_C
5C_C

Q401 PF2
5T_C

BATT
470p

L404

Q402
77 SIM1
78 SIM2

RSSI

PCTV
VOX
S1

RT1N141U PTT
RT1N141U
LED SW GND
LED SW
R437
76

79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100

/RED /GREEN SW1 R415 47k


47k
S2

SW1 R416 47k


C431
L403

R438
SW2
0.01u
47k
S3

SW2
RSSI
BUSY
4.96V TMH
BATT VOX
RESET
INT
5M 5M

DI
AFCONT
CL OPTDET
RXD/PTT
CE TXD
PCTV
DO MIC_MUTE
QT/DQT_IN
PTTSW
SB SB

X57-7130-XX L16 L17 R40 R42 C52 C54 C55 C56 C58 C61 C64 C65 C66 C67
-10 TK-3212 K,M 22n 27n 100 4.7k 11p 9p 11p 2p 6p 3p 4p 6p 6p 5p
-11 TK-3212 K2,M2 18n 22n 100 4.7k 12p 9p 12p NO 9p 4p 5p 5p 6p 7p
-21 TK-3217 M 22n 27n 150 10k 12p 6p 12p NO 6p 3p 5p 7p 7p 5p

X57-713 2/4
K L M N O

TK-3212/3217 SCHEMATIC DIAGRAM


TX-RX UNIT (X57-7130-XX)

RF AMP
D101,202 Q101 T:4.96V
T:4.81V 2SK3077 C112 R112 R111
TX/RX
RF AMP RF SW R:0V R103 C107
T:2.846V 7p 0 0
Q9 4.62V

R110

L101
47k 6p

15n
330
3.86V 2SC4619 C87 D101 C101 C102

R105
C83

L100
330

15n
10p HSC277 470p 12p Q100
15p 2SC4619

R49

HSC277
22n
L25
2.2k

L411
18n
D202

R100

R107
RF AMP

R50

100
4.7k
4.7k

C110

L102
470p
R:2.934V
T:3.002V

C106

R106
470p

22
1000p

1000p
C85

R48
R46

C86
330
10k

C100

470p
R453

22k

R452

470p
C108
10k
T:4.96V

5T
R47

22

C113
C111

470p

0.1u

R115
10k
1000p
C84

TH101

100k
-t
TMH TMH
DCSW DCSW
APCSW APCSW
OSCIN
5C
B B
5T
5R 5R L250
R:2.87V
CF201 T:0V 18n
R:5.01V
T:0V L72-0958-05 C290
R206

C213
10

2p(B)

R217
4.7k

C291
6p(B)
0.1u

6p(B)
C233
10u6.3

C211
C209

0.01u

C222

1000p
C216

38.4 MHz
0.1u
C208

MIXOUT 2 C218
R212
470p

0.1u
82k

R208 C210

82k 470p
8
FILIN 7
FILOUT 6

4
3

C221

C225
R209

0.1u

0.01u
R215
2.7k

L202
100
DEC
IFIN

VCC

GND OSCOUT

MIXIN OSCIN

R:5V
R207

C206

1000p
4.7k

FM IF 5R
C220

1000p

SYSTEM BPF

C230
L201

0.01u
AFOUT

14 N-REC

1u
N-DET
IFOUT
10 QUAD

MCF
RSSI

3.5p(B)
IC201

R233
R227

C240
XF201

100k
R902

1k
TA31136FN L71-0619-05
R:4.74V
4.7k 38.85 MHz R:5V
11
12

13

15
16
9
C901

C224 R218 C231 R219 L204


1u

R210 C219 R216 oUT IN Q204


3SK318 R:1.795V
C214
R901

4.7k

68p

3.3k 2 270n
1800p

33p 120k 0.01u 560 1 0.01u 560


C207

MIXER

0.56u
Q901
3
4
5
6

L203
W/N SW/RX R211
2SK1824
C440

Q202 C239
1.5p

3.3k R:0.47V R:1.808V


R203
180k

RX_W/N RT1P441U Q203 R226 1000p


CD201

C228
R213

2SC4649(N,P)
10p

W:0.015V
3.9k

1k
C217

C201

W/N SW/TX
0.22u
0.1u

N:4.94V

R236

* L290
* L206
IF AMP

0.01u
C232

56k
C234

1000p

C236
TH203

18p

1000p
C237

R228

C238
100K

CN201

150

0.1u
-t

C215

1000p

TX_W/N TX_W/N
DTMF
DTRLOADN R316
STD
120k

R312
DIR

R315

C319

C320
R317
270p
330k
330k

0.01u
470k
R301 C302 R304
TDATA/DTRCLK
DI/O 10k 270p 27k
5M
SCLK
ROF/FD C312
4.7u6.3
C307
3900p
C306
C301

C308
0.1u

0.1u

TCLK/DTRDO
12p

LIMLV
IC407 C315
TC7W74FU
XIN
C450 1 8 1u
9

8
7

6
5
4

3
2

CK VCC
XOUT R422 X3 0.01u
STD

VDD

MoD

EXTLIMIN

LIMLV

TXINo

TXIN

AGNDIN

2 7
L77-1633-05 D PR
BSHIFT ON:4.95V 1k C432 R423 R410 7.37MHz R409 C435 10 DTRLoADN 32
3 6 AGND
OFF:0V Q407 Q CLR TCLK/DTRDo
Q408 C451 11 31 RXIN
BSHIFT 2SK1830 5p 0 0 0 5p 4 5 TDATA/DTRCLK RXIN
2SK1830 GND Q
0.01u 12 30 RXINO
C434
C433

DI/o RXINo
3p

3p

IC301
R306 13 AQUA-L 29 FILTERO
FREQUENCY DIVIDER RDF/FD FILTERo
EEPCLK
C452 1k 14 AUDIO PROCESSOR 28 EXPOUT
EEPDAT SCLK EXPoUT
15 27 RXAFIN
1000p DIR RXAFIN
16 26 RXAF
XoUT RXAF
DTRAIN

Q407,408
AMP3N

AMP4N
AMP3P

AMP4P
AMP3o

AMP4o

EEPROM
R307

VSS
XIN

BEAT SHIFT SW
0

IC406
AT24128N10SI27
17

18
19

20
21

22

23

24

25

3.6864MHz CLK DTRAIN


1 8
A0 VCC
R451

68

2 7
A1 WP
C350

470p

3 6 R424 47k C309 C313


4.7u6.3

A2 SCL
C314

C318
0.1u

4 5 R425 47k 82p 120p


GND SDA R310
RSSI R313
BUSY D301
TMH RB706F-40 390k 100k
VOX
C311
R314 10k C316 0.1u
R305

C304

0.22u
100k

5M 1u
C310 0.068u R311 12k
DETECTOR
AFCONT AFCONT
OPTDET OPTDET
RXD/PTT RXD/PTT
TXD TXD
PCTV PCTV
MIC_MUTE MIC_MUTE
QT/DQT_IN QT/DQT_IN
PTTSW PTTSW
SB SB

X57-7130-XX L206 L290


-10 TK-3212 K,M NO 30n
-11 TK-3212 K2,M2 27n NO
-21 TK-3217 M NO 30n

X57-713 3/4
P Q R S T

SCHEMATIC DIAGRAM
Note : The components marked with a dot ( ● ) are parts of layer1.
TK-3212/3217
TX-RX UNIT (X57-7130-XX) 1
D103,122
ANT SW

TX DRIVE AMP TX FINAL AMP D122


C163
* C160 * C166
T:1.36V Q102
2SK2596
R:7.61V
T:7.26V
Q103
2SK3476 * R456 HVC131 3p
L107 STRIP LINE
L103 L104 C123 R123 R137 C152 D103 C158 L224 L225 L226 ANT
8.2n 8.2n 1.2n 4T 4T 4T CN13
33p(G) 0 0 20p HVC131 100p

* C132

* C159

* C168
* C161

* C164
* L105

R190
C116

R116

C125

C127

*C444
L220

*C445

L111
* C142

*C293

* C151
*C145
20p
11p

2.5n
100
22

220n

1u
6p

L110
(B)
0.01u
C191
R194

R124

C135
C129

C133
470p

470p
L109
47k

47k

0.1u
C122
R193

C119
R114

L106
470p
120k

33p
47k

R191

R192

C154

470p
270

270
L223 R147
R145
* C169
4T 0 0
2

HSC277
HSC277
C130

C134

C136
470p

0.01u

* C156

* C157
C124

C190

D106
C128

1u
470p

D104
10p

1u

(B)

(B)
5T
T:2.5V(H) D104,106
1.97V(L)
APC PROTECT R126 ANT SW

HZU5CLL 2.2k R135


C126

1u16
D102

APC SW
150k(D)
Q109
C140 IC101 RT1P441U
TA75W01FU
100p

R132
1 8 C146

150k
APC SW

(D)
DCSW OUT1 VCC

R138

R140
56k
Q104

1M
APCSW R130 2 7 1000p
RT1N141U IN1- OUT-B
150k(D) 3 6

R127

R128

R129

C138

1000p
IN1+

0.39

0.39
0.39
B Q105 IN2- APC SW
4

C148
5

1000p
2SK879(Y) R131 VEE IN2+ Q108
R141 2SK1824
R121

APC SW
150k(D)
22

R133

R139
100k

150k
(D)

R143
COMPARATOR

47k

100k
R134 (APC)
R:7.61V
150k(D)
3
T:7.39V R142

0
Q107
RT1N141U
APC SW
L410
5R
4.7u6.3

220n
L215
C258

C265
C262
C256

R251

R253
470p

470p

470p
100k
100k
R238
100k

Q205
* R449 * R450 R:4.9V 3SK318
R:4.98V
C241 R240
* C246 * C248 * C252
* C253 C259 R249
C266
470p R255 C269 C272
* C255
* C245

*C250

470p 0 (B) (B) (B) (B) 470p 22

*C273
0

*C268
2p

* C274
RF AMP 2p

R258
R239

C257
*C249
* C244

* L214
* L212
56k

* L211

R:2.046V

0
(B)
(B)

(B)
(B)

HVC355B

R:0.96V
*C275
HVC355B

* C267
D210

*L228
D204
R243

R244

*
1.0M

1.0M
D203

(B)

HVC355B
(B)

HVC355B
* R241

L229
D206
D205

C276
*

R257
C292

R254

R256
4

1.0M
1.0M
470p

68k
R248

C263
470p

(B)
220

* L230 *
RF BPF TUNING

D205,206
* C247

D203,204
C251

C270
C254

C271
470p
470p

470p
470p

TX_W/N RF BPF TUNING RF BPF TUNING

R354 R355 C354


C351

C352
0.01u

0.01u

10k 10k 0.1u


R:0.3V(MUTE ON) R343
7.3V(MUTE OFF)
IC302 470k SP MUTE SW R348
56k
T:0.3V
5M C334 TA7368F
Q306
1 10 CPH3413 C345
W/N SW/TX 0.1u Q304 1 PoUT
R319

7.52V 2SA1362(GR) 2 9 100u6.3


56k

Q301 VCC PW-GND


RT1P141U 3 8
R322 180k DC SW 3 PRE-GND
LIMLV R336 4 100p
R342

7 C338
100

VIN SP MUTE SW
C327

PHASE
R320

100p
3.3k

R334 1k 5 6 R337 C339


RIPPLE NF Q316
R323 56k
47k 150 10u6.3 CPH3413
C328 390p
C341

C343

R349
C336

0.047u

0.047u
C335

220p

0.47u

33k
R335

R324 100k
2.2k

AF AMP
5
C323

82p

RXIN SP
C340
R325 100k R329 C329
RXINO
82k R:7.3V(MUTE ON) 0.1u
FILTERO 1u
Q303 0.3V(MUTE OFF) Q305
R321 RT1N441U T:7.3V RT1N441U
EXPOUT C322 0.015u
L302

RXAFIN 220k R326 0 DC SW/SP MUTE DC SW/SP MUTE

RXAF
1000p
C346
C324

R327
82p

180k

J301
R330
3.3k C330 R338 2.2k R345 E11-0457-05
PTT/RXD
R341 10k 100 MIC
C325 R331 C331 1u MICIN
DTRAIN 0.1u
OPTDET
C326 1000p 150k 0.1u 5MS
100 AE
R352

MIC AGC R346


100k

DETECTOR ISOLATION TXD


D303 Q302 R344 1k NC
D302
R318 2SC4919 SPO
R339

C344

R347
220p

100k
470

C317 R328 SPI


1.2k
C332

C357

4700p
470p
C321

10k
0.01u

0.1u
10u6.3
R340

C342

0.033u

RB706F-40
C356

DAN222
R350
1.8k

1k
R353

6
0

C333 L301 MIC1


R332
15k 0.1u
C348

470p

AFCONT
OPTDET
RXD/PTT
TXD
PCTV
MIC_MUTE
QT/DQT_IN
PTTSW
SB

X57-7130-XX D210 L105 L211 L212 L214 L228 L229 L230 R241 R449 R450 R456 C132 C142 C145 C151 C156 C157 C159 C160 C161 C164 C166 C168 C169
-10 TK-3212 K,M HVC355B 15n 8.2n 8.2n 8.2n 8.2n 8.2n 56n 1.0M NO NO NO 27p NO 16p NO 6p 2.5p 2p 2p 5p 5p 0.75p NO 5p
-11 TK-3212 K2,M2 NO 22n NO 6.8n 6.8n 6.8n 6.8n 56n NO 0 0 0 27p NO 18p 7p 3.5p 4p 3p 1.5p 6p 6p 1.5p 0.3p 9p
-21 TK-3217 M HVC355B 15n NO 8.2n 8.2n 8.2n 8.2n 39n 1.0M 0 0 NO 24p 7p 18p NO 4p 1p 2p 2p 5p 5p 0.75p NO 6p

X57-7130-XX C244 C245 C246 C247 C248 C249 C250 C252 C253 C255 C257 C267 C268 C273 C274 C275 C276 C293 C444 C445
7
-10
-11
TK-3212
TK-3212
K,M
K2,M2
3p
NO
22p
NO
1p
NO
470p
NO
2p
NO
5p
3p
22p
18p
2p
1.5p
2p
1p
22p
18p
3.5p
5p
3.5p
4.5p
22p
18p
22p
18p
2p
1.5p
2p
2.5p
2.5p
2p
NO
NO
7p
NO
7p
20p
39
-21 TK-3217 M NO NO NO 470p NO 2.5p 22p 1p 1.5p 22p 4.5p 4p 22p 22p 1p 3p 4p 7p NO NO

X57-713 4/4
TK-3212/3217 SCHEMATIC DIAGRAM Note : The components marked with a dot ( ● ) are parts of layer1.
TX-RX UNIT (X57-7130-XX)
5C 5C
R9 0 D2,4,6,7 L19 D103,122
C40 CV * R40

L6
R10 0 FREQUENCY D6 RF BUFFER AMP

R32
220n ANT SW

1k

C69
VCO OSCILLATION (TX)

470p

C72

0.1u
3p CONTROL HVC376B T:3.37V Q6
R11 0 2.74V

R23

10k
/TX VCO 0.72V 2SC5108(Y) TX DRIVE AMP TX FINAL AMP D122
C43 C163
L8 L9 C78
* C160 * C166

1000p
C33
R20
20

19
18
17

16
15

14

13
12

11
L24

10
L10 D7
* C52
* L16
* C64 C73 R:7.61V
* R456

100p
100p
100p
18n RF AMP T:1.36V Q102 Q103 HVC131
10p 18n 33p T:4.96V 2SK3476 3p
2SK2596 T:7.26V

470p
C48
100n D101,202 Q101

R
NC5
P

FOUT
NC4

FC

LE
DATA

NC3

CLK

C38

C42
0.5p

150k
R33
HVC376B STRIP LINE

5p

5p
VCO/TX

C59

22n
L23
T:4.81V 2SK3077 C112 L103 C123 L107 C152 D103 C158 L224 L225 L226

R41
L104 R137

1p
(B) R123

* C54
R111

150k
PLL SYSTEM R112 ANT

HVC376B
HVC376B
TX/RX

3.3u
L21
C50 Q4

C7
C8
C11
RF AMP RF SW R:0V R103 C107 CN13

OSCOUT
IC1 2SK508NV(K52) 3.7V 7p 0 0 8.2n 8.2n 33p(G) 1.2n 0 0 HVC131 100p 4T 4T 4T
T:2.846V 20p

C60

* C132
4.62V

OSCIN
Q9

1p
MB15A02

100p

100n
Q2

C47
10p

L13

R110

L101
6p

* C159

* C168
47k

15n

* C161

* C164
330
GND
3.86V

* L105
D101

VCC

R190
C116

R116

C125

C127
2SC4619 C87

NC1

NC2
C101 C102

*C444
L220

*C445

L111
* C142

*C293

* C151
*C145
2SC5108(Y)

20p
11p
1000p

2.5n
100
FIN

22
DO

C76

220n

1u
6p
VP

L110
LD

R105
R43
C83

L100

(B)
330
Q5

15n
100
4.82V

* C67
C62

R39
TC1

10p

150
PLL IC F_IN AMP

2p
Q100

1SV278
10p 470p 12p

470p
RT1P430U HSC277

D10
R27

C44

D4
D2
22
2SC4619

2
3

4
5

6
7

9
10
R:4.97V 15p

R49
R8

HSC277
22n
L25
2.2k

L411
18n
D202
T:0.58V

R100

R107
C29 RF AMP

R50

100
4.7k
4.7k

C110

L102
470p
0 R:2.934V

0.01u
C191
R194

R124

C135
C129

C133
470p

470p
L109
1000p

47k
T:3.002V

47k

0.1u
C122
R193

C119
C75

R114

L106
470p
TX MODULATION MODULATOR DC SW/TX VCO

120k
470p

33p
47k
C106

R106
470p
4.76V

22

R191

R192
10u6.3

C154
10u6.3
R16 R21 R22

470p
R15

270

270
1000p

1000p
C21
C13
C10

C19

0.1u
L12

0.1u
R26 C45 R34 L22

C85

R48
R25 R31

R46
R36

C86
330
10k
220 560 680 0

C100

470p
L223 R147
* C169

R18
0.33u35

180
270k R145

0.1u35
22k 10k 1u 470k 470k 4.0V

C70
270k

470p
R453

C32
C22

R35
R:0.59V

3300p

6800p
4T 0

C39
C902

C41
R30 T:4.94V 0

HSC277
HSC277
C130

C134

C136
470p
D3,5,8,9

0.01u

* C156
22k

* C157
R19

C124
3.3u16 1.2k

C190
R452

D106
C128
470p
C108

1u
470p

D104
10k

10p

1u
33k

(B)

(B)
1u

1000p
R:3.4V

C90
FREQUENCY T:4.96V
RIPPLE L18 R37 RIPPLE
CONTROL

1000p
Q7

100
R7
100k

C16
R5
FILTER

C27
FILTER /RX VCO RT1P430U 5T 5T

R47
D8 220n

22
100 Q8

C71
100p

470p
C68
C63

0.1u
D1 DC SW/RX VCO T:2.5V(H) D104,106
VCO OSCILLATION (RX)

C113
2SC4617(S)

C111

470p

0.1u
HVC376B 1.97V(L)

R115
APC PROTECT ANT SW

1000p
L11

10k
0.01u
MA2S111 C4 VR1 68k D9 C65 C74 R126

MA2S111
L17
100n
* C55
* *

R42
0

470p

470p
C77

C80
D11

HZU5CLL
R12-7491-05 2.2k R135

HVC376B
HVC376B
L7
0.01u 0.5p

C126
*

1u16
D102
HVC376B

* C58
APC SW

C6

0.1u

1000p
4.9V Q3 VCO/RX

C84
L20
C14
X1

C12

3.3u
150k(D)

R13
R17

TH101
2SK508NV(K52) Q109

100n
C49

100p

100k
L77-1931-05

82k
R6

L14
C140

10u6.3
IC101 RT1P441U

C79

-t
100 CURRENT TA75W01FU

1000p
R1 R2 R3 C3 4

* C56

* C61

* C66
1 4.72V

560n
STEERING

TC2

R38
100p

C24

180
VCC

10p
VC

L3

R132
TMH TMH 1 C146

D3
8

150k
D5
22k 10k 33k 1u APC SW

(D)
12.8MHz 0.71V DCSW DCSW DCSW DCSW OUT1 VCC

R138

R140
56k
Q104

1M
C25 APCSW APCSW APCSW APCSW R130 2 7 1000p
2 3 L1 R12 C17 R14 C34

3300p

6800p

1000p
OSCIN OSCIN OSCIN OSCIN RT1N141U IN1- OUT-B

C2

C5
C1

56k
R4
GND oUTPUT
4.7u 5C 5C 150k(D) 3 6
2p

R127

R128

R129
2.2k 47p 330k 1000p

C138

1000p
IN1+

0.39

0.39
0.39
TRIPLER B B B B Q105 IN2- APC SW

C26
4

560n
C35
5T 5T

C148
5

C18

18p

30p
C9
LCD ASSY (B38-0906-15)

C15

27p
10p
10p

1000p
L5
Q1 L250 2SK879(Y) VEE Q108
TXCO 5R 5R 5R R:2.87V R131 IN2+
KTC4082 2SK1824
CF201 T:0V 18n R141

R121
R:5.01V APC SW
L72-0958-05 C290 150k(D)

22
T:0V

R206

R133

R139
LCD 100k

150k
(D)

R143
COMPARATOR

47k
QTTCXO QTTCXO C213

100k
10
2p(B) (APC)

R217
PLL_UL PLL_UL R134

4.7k
PLL_STB PLL_STB

C291
6p(B)
0.1u

6p(B)
C233
R:7.61V
PLL_DAT PLL_DAT T:7.39V 150k(D)
R142

10u6.3
PLL_CLK PLL_CLK

C211
C209

0.01u

C222

1000p
C216
5C 5C

38.4 MHz
0.1u
C208

C218
R212
470p

0.1u
82k
0
L401 F401 C210
BATT B B R208
Q107
F53-0324-05 RT1N141U

1000p
82k 470p

8
FILIN 7
FILOUT 6

4
3

1
C401

C405

C221

C225
C402
D402

100p
470p

R209

0.1u

0.01u
R215
2.7k

L202
2.5A

100
BATT 1SR154-400 APC SW

DEC
IFIN

VCC

MIXOUT
GND OSCOUT

MIXIN OSCIN
R:5V

R207

C206

1000p
4.7k
REVERSE L410
CN401 PROTECTION FM IF 5R 5R

CP405

C220

1000p
E40-6363-05 1 B SYSTEM

1Kx2
BPF

C230

4.7u6.3
L201

0.01u
AFOUT

220n
L215
C258

C265
14 N-REC

C262
C256

R251
1u

R253
N-DET

470p

470p

470p
IFOUT

100k
100k
10 QUAD
MCF

RSSI

3.5p(B)
2 SB IC201

R233
R227

C240
EN1 EN1 XF201

100k
R902

1k
TA31136FN

R238
L71-0619-05
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S23
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33

100k
AFI R:4.74V
C1
C2
C3
C4

3
S1
S2
S3
S4
S5
S6
S7
S8
S9

EN2 EN2 4.7k 38.85 MHz R:5V

11
12

13

15
16
9
C901
Q205
C224 R218 C231 R219 L204
* R449 * R450

1u
4 AFO R412 47k R210 C219 R216 oUT IN Q204 R:4.9V 3SK318
1 37 R:1.795V R:4.98V
3SK318

C214
T:4.99V

R901

4.7k

68p
3.3k 2 270n C241 R240
* C246 * C248 * C252 * C253 C259 R249

1800p
5 GND R408 47k 120k 0.01u 560 1 0.01u 560

R447
R418

R435
33p

C207
R417
C266

47k

47k

12k
47k
MIXER

0.56u
Q901

3
4
5
6

L203
5T SW W/N SW/RX R211 470p R255 C269 C272

C255
C245

C250
6 UP 2SK1824 470p 0 (B) (B) (B) (B) 470p 22

4700p
Q403

C440
Q202 C239

C406

4700p
C403

C408

C273
1.5p
0

*C268
2p

* C274
3.3k R:1.808V 2p

0.1u
R:0.47V RF AMP

R258
R203

R239

C257
CPH3317

*C249
180k
DOWN R226

* C244
7 1000p

* L214
* L212
56k
RT1P441U

* L211

*
Q203 R:2.046V

*
*
RX_W/N RX_W/N

0
(B)

(B)
(B)

(B)
CD201

C228

HVC355B
R:0.96V

R213
2SC4649(N,P)
*C275

10p
W:0.015V

*
3.9k

HVC355B

* C267
8 GND

D210
1k

*L228
C217

D204
R243
C201

R244

*
W/N SW/TX

1.0M

1.0M
0.22u

D203
C426

0.1u
N:4.94V

C443

(B)
0.47u

HVC355B
R236
1u

* L290
* L206
IF AMP (B)

HVC355B
0.01u
C232

56k
C234

1000p

C236
R421

R241
TH203
R404

* L229
18p

D206
1000p
C237

R228

D205
C238
100K

C276
CN201

150

*
0.1u

R257
C292

R254

R256

1.0M
1.0M
470p

68k
R248

C263
-t

470p

(B)
470k(D)

220
R:3.70V
100

470k(D) 1k

470p
C415

C456
R406
C215

*
0.1u
T:3.57V

*
0

1000p RF BPF TUNING

50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26

L230
R:5.01V
IC402 D205,206
R436
R403

5V PROTECTION

C247
D203,204

C251

C270
C254

C271
470p
470p
CP406

470p
EN1

RX_W/N
VCC
PLL_CLK
PLL_DAT
PLL_STB
PLL_UL
GND
TX_SW
RX_SW
TX_W/N
DCSW

APCSW
GND
RxD
TxD
QTTCXO
PTT

470p
XC6204B502MR Q404 TX_W/N TX_W/N TX_W/N TX_W/N

*
D401 5.00V 5R SW 1Kx2 51 25 RF BPF TUNING RF BPF TUNING
RB521S-30 RT1P237U DTMF DTMF

*
1 5 52 24
VIN VoUT DTRLOADN DTRLOADN R316 R354 R355
OPTDET C354

C351

C352
2 53 23 STD STD

0.01u

0.01u
R:7.56V 10k 0.1u

C421
10k

C427
DO DTRLOADN STD 120k

1u

1u
T:7.26V VSS CP407 54 AF_CONT 22

R312
DIR DIR R343

R315
QTVCO R:0.3V(MUTE ON)

C319

C320
R317
3 4 CE

270p
330k
330k

0.01u
470k
1Kx2 DIR R301 C302 R304
CE NC IC401,402 55 21 TDATA/DTRCLK TDATA/DTRCLK 7.3V(MUTE OFF)

R348
CL TDATA/DTRCLK IC302 470k SP MUTE SW

56k
T:0.3V
C409

VOLTAGE 56 20 DI/O DI/O 10k 270p 27k TA7368F


1u

DI DI/O 5M 5M C334
REGULATOR/5V Q405 57 19 Q306
5C SW SCLK SCLK CPH3413 C345
IC401 RT1P237U SCLK 1 10
58 18 ROF/FD ROF/FD C312 W/N SW/TX 0.1u Q304 1 PoUT
XC6204B502MR

4.7u6.3
R:4.83V RDF/FD

C307
3900p
C306
C301

C308

R319
R:7.28V 4.96V 7.52V 2SA1362(GR) 2 9 100u6.3

56k
59

0.1u

0.1u
4.95V 17 TCLK/DTRDO TCLK/DTRDO Q301
1 5 TCLK/DTRDO VCC PW-GND

C428
12p

C429

1000p
T:6.80V

1000p
VIN VoUT 60 16 RT1P141U 3 8
VCC INT
32

31
30

29

28

27

26
25
24
23

22
21
20

19
18

17

2 61 15 R419 R322 180k DC SW 3 PRE-GND


LIMLV LIMLV
C417

VSS VCC R336 4 100p

R342
L402 C430 MICROPROCESSOR 7 C338
1u

IC407

100
33 16 62 14 47k C315 VIN SP MUTE SW

C327
3 4 PHASE

R320
VSS

100p
VCC TC7W74FU

3.3k
CE NC 63 R334 1k 5 6 R337 C339
15 0.01u IC405 13 XIN XIN Q316
34 GND XIN R323 56k RIPPLE NF
C407

1000p

30620MCP-A00GP C450 1 8 1u CPH3413


64 12 47k 150 10u6.3

8
7

6
5
4

3
2

1
14 GND VSS CK VCC C328 390p
35 R422 X3

C341

C343

R349
C336
R413

0.047u
65 11

0.047u
C335
R414

220p
XOUT XOUT 0.01u

STD

VDD

MoD

EXTLIMIN

LIMLV

TXINo

TXIN

AGNDIN

0.47u
2 7

330
330

33k
R335
CP404 XOUT L77-1633-05 R324 100k

2.2k
36 13 66 10 D PR AF AMP
47Kx2 BSHIFT ON:4.95V 1k C432 R423 R410 7.37MHz R409 C435 10 32
LED/RED RESET 3 6 DTRLoADN
VOLTAGE DETECTOR/RESET LED/GREEN 67 9 OFF:0V AGND

C323
Q407 Q CLR TCLK/DTRDo
37 12 11 31

82p
IC403 D403 2SK1830 5p 0 0 0 5p Q408 4 5 C451 RXIN RXIN SP
D404 68 8 BSHIFT BSHIFT TDATA/DTRCLK RXIN
11 BD4840FVE B30-2156-05 AUX BSHIFT 2SK1830 GND Q C340
B30-2157-05 R470 69 7 R420 12 30 R325 100k R329 C329
0.01u RXINO RXINO

C434
C433
AUX GND DI/o RXINo

3p

3p
10 R407 1 5 70 6 47k IC301 R:7.3V(MUTE ON) 0.1u
VoUT VDD 1k R306 13 AQUA-L 29 82k 1u
ON:4.92V ON:4.92V BYTE FILTERO FILTERO Q303 0.3V(MUTE OFF)
330k 71 5 FREQUENCY DIVIDER RDF/FD FILTERo Q305
C410

40 LCD DRIVER 9 2 OFF:0.01V OFF:0.01V EN2 EEPCLK EEPCLK RT1N441U T:7.3V


EEPCLK 1k 14 AUDIO PROCESSOR 28 R321 C322 RT1N441U
1u

SUB 72 4 C452 EXPOUT EXPOUT 0.015u


PT6554LQ LEDTX EEPDAT EEPDAT SCLK EXPoUT

L302
41 8 3 4 EEPDAT DC SW/SP MUTE
NC GND 73 3 15 27 RXAFIN RXAFIN 220k R326 0 DC SW/SP MUTE
LEDRX 1000p DIR

QT/DQT_IN

MIC_MUTE
RXAFIN
5600p
C418

42 7 PTT SIDE1 74 2 16 26 RXAF RXAF

1000p
C346
PF1

TH_DET

C324

R327
DTMF XoUT

82p
RXAF

180k
DTRAIN
75 1 Q407,408

AMP3N

AMP4N
J301

AMP3P

AMP4P
C424
SIDE2

AMP3o

AMP4o
BUSY

AVCC
VREF
AVSS
5R_C
5C_C
6 Q401 PF2

5T_C

BATT
470p

L404
Q402 EEPROM R330

77 SIM1
78 SIM2

RSSI
43

R307
PCTV

VOX
S1
PTT E11-0457-05

VSS
2.2k R345

XIN
RT1N141U BEAT SHIFT SW 3.3k C330 R338 PTT/RXD

0
RT1N141U IC406
44 5 GND R341 10k MIC
VOLTAGE LED SW LED SW AT24128N10SI27 C331 100
R437 R331 1u

76

79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
MICIN

17

18
19

20
21

22

23

24

25
/RED /GREEN SW1 R415 47k DTRAIN DTRAIN C325 0.1u
45 DETECTOR/INT 3.6864MHz CLK OPTDET
47k 1 8 C326 1000p 0.1u 5MS
A0 VCC 150k
IC404

S2
R416 47k

R451
46 SW1 100 AE

R352
R346

68
MIC AGC

100k
CN402 BD4845FVE 2 7 DETECTOR ISOLATION TXD
C431 A1 WP

L403

C350
Q302

470p
47 E40-6430-05 R438 D302 D303 R344 1k NC
R405 1 5 3 6 R424 47k C309 C313 R318
SW2 2SC4919 SPO

4.7u6.3

R339

C344

R347
GND VoUT VDD A2

220p
1 SCL

100k
0.01u

470
C314

C318
C317 R328 SPI

0.1u
330k
1000p

47k
C411

10 2 4 5 R425 47k 82p 120p 1.2k

C332

C357
S3

4700p
NC SUB SW2 GND SDA

470p
2

C321
R310
50

RSSI RSSI R313 10k

0.01u
3 4 0.1u
9 D301

10u6.3
BUSY BUSY

R340

C342

0.033u
SB 3 NC GND RB706F-40

C356
4.96V RB706F-40 DAN222

R350
1.8k
TMH TMH 390k 100k
1000p

1k
R353
C419

8 BATT BATT VOX VOX


5M 4 C311

0
RESET RESET MIC1
7 INT INT C333 L301
R314 10k C316 0.1u R332

R305

C304
GND 5

0.22u
100k
5M 5M 5M 5M 1u
C 6 15k
DI 6 C310 0.068u R311 12k 0.1u

C348

470p
DI DI DETECTOR
5 AFCONT AFCONT AFCONT AFCONT
CL 7
B CL CL OPTDET OPTDET OPTDET OPTDET
4 RXD/PTT RXD/PTT RXD/PTT RXD/PTT
CE 8 CE CE TXD TXD TXD TXD
3 PCTV PCTV PCTV PCTV
A DO 9 DO DO MIC_MUTE MIC_MUTE MIC_MUTE MIC_MUTE
2 QT/DQT_IN QT/DQT_IN QT/DQT_IN QT/DQT_IN
GND 10 PTTSW PTTSW PTTSW PTTSW
S 1 SB SB SB SB SB SB

X57-7130-XX D210 L105 L211 L212 L214 L228 L229 L230 R241 R449 R450 R456 C132 C142 C145 C151 C156 C157 C159 C160 C161 C164 C166 C168 C169
-10 TK-3212 K,M HVC355B 15n 8.2n 8.2n 8.2n 8.2n 8.2n 56n 1.0M NO NO NO 27p NO 16p NO 6p 2.5p 2p 2p 5p 5p 0.75p NO 5p
-11 TK-3212 K2,M2 NO 22n NO 6.8n 6.8n 6.8n 6.8n 56n NO 0 0 0 27p NO 18p 7p 3.5p 4p 3p 1.5p 6p 6p 1.5p 0.3p 9p
X57-7130-XX -21 TK-3217 M HVC355B 15n NO 8.2n 8.2n 8.2n 8.2n 39n 1.0M 0 0 NO 24p 7p 18p NO 4p 1p 2p 2p 5p 5p 0.75p NO 6p
L16 L17 R40 R42 C52 C54 C55 C56 C58 C61 C64 C65 C66 C67 X57-7130-XX L206 L290
-10 TK-3212 K,M 22n 27n 100 4.7k 11p 9p 11p 2p 6p 3p 4p 6p 6p 5p -10 TK-3212 K,M NO 30n
X57-7130-XX C244 C245 C246 C247 C248 C249 C250 C252 C253 C255 C257 C267 C268 C273 C274 C275 C276 C293 C444 C445
-11 TK-3212 K2,M2 18n 22n 100 4.7k 12p 9p 12p NO 9p 4p 5p 5p 6p 7p -11 TK-3212 K2,M2 27n NO
-10 TK-3212 K,M 3p 22p 1p 470p 2p 5p 22p 2p 2p 22p 3.5p 3.5p 22p 22p 2p 2p 2.5p NO 7p 7p
-21 TK-3217 M 22n 27n 150 10k 12p 6p 12p NO 6p 3p 5p 7p 7p 5p -21 TK-3217 M NO 30n
-11 TK-3212 K2,M2 NO NO NO NO NO 3p 18p 1.5p 1p 18p 5p 4.5p 18p 18p 1.5p 2.5p 2p NO NO 20p
-21 TK-3217 M NO NO NO 470p NO 2.5p 22p 1p 1.5p 22p 4.5p 4p 22p 22p 1p 3p 4p 7p NO NO
TK-3212/3217
BLOCK DIAGRAM
X57-713

IC404 BD4845FVE IC403 BD4840FVE IC1 MB15A02

PLL_DAT
INT INT RESET RESET PLL_CLK
PLL_STB

D401 RB521S-30 IC401 XC6204B502MR Q4 2SK508NV(K52)


PLL D2,D4,D6,D7 HVC3768
D10 1SV278
SB PROTECT AVR 5M
Q405 RT1P237U Loop TX
Filter VCO
DC 5C
SW Q5 RT1P430U
5C
12.8MHz DC
5C_C TX
X1 SW
L77-1931-05
Q403 CPH3317
QTTCXO LPF LPF Q3 2SK508NV(K52)
DC 5T D3,D5,D8,D9 HVC3768
IC402 XC6204B502MR SW
5C QTVCO RX
AVR 5T_C
VCO
Q7 RT1P430U
ENCODER Q404 CPH3317
EN1 RX DC
DC 5R SW
EN2 SW

5R_C Q901 2SK1824 Q1 KTC4082

38.4MHz
WIDE/ NARROW SW TRIPLER

5R
Q202 RT1P441U CD201 L79-1582-05

RX_W/N SW

BATT + 5C 5C
450kHz

- PROTECT
Batt.
Det.
BATT
MOD
IC301 AQUA-L

D402 1SR154-400

AUDIO
PROCESSOR
PWR SW
5M
/ VOL SB

DI/O
DTRLOADN STD
TDATA/DTRCLK RDF/FD
SCLK TCLK/DTRDO
DIR
ALT IC406 AT24128N10S127
DTMF
AQUAXIN
Q306, Q316 CPH3413 IC302 TA7368F TXAFI
RXAF0 EEPROM
XIN
MUTE AF
SP SW AMP
AGC
Q407 2SK1830
Q302 2SC4919
D303 DAN222
D302 RB706F-40 SW
Q305 RT1N441U Q304 2SA1362(GR)

DC DC
SW SW DET VOX

SB SB D301 RB706F-40
X3 L77-1633-05
7.37MHz

DC AFCONT
SW
Q303 RT1N441U

MIC

40
TK-3212/3217
BLOCK DIAGRAM

TX/RX:450.00~490.00MHz (TK-3212(K,M))
TX/RX:470.00~512.00MHz (TK-3212(K2,M2))
Q2 2SC5108(Y) TX/RX:440.00~480.00MHz (TK-3217(M))
RF
AMP

5C
Q6 2SC5108(Y) Q9 2SC4619 D101,D202 HSC277 Q100 2SC4619 Q101 2SK3077 Q102 2SK2596 Q103 2SK3476 D122,D103,D104,D106 HVC131

BUFF RF T/R RF RF RF RF ANT LPF


ANT
AMP AMP SW AMP AMP AMP AMP SW

5C 5C 5R 5C 5T 5T 5T

B
Q104 RT1N141U
Q105 2SK879(Y) Q109 RT1P441U IC101 TA75W01FU

DC DC CURRENT
SW SW DET
Q108 2SK1824
DCSW

APCSW DC DC APCSW
Q8 2SC4617 SW SW
D11 MA2S111
Q107 RT1N141U
RIPPLE 5C PCTV
FILTER

IC201 TA31136FN Q203 2SC4649(N,P) XF201 L71-0619-05 Q204 3SK318 D203,D204 HVC3558 Q205 3SK318 D205,D206 HVC3558

IF MCF 1st BPF RF BPF


AMP MIXER AMP
38.85MHz
5R 5R PCTV 5R PCTV
CF201 L72-0973-05

FM IF
SYSTEM CF

450kHz
SB SB
D403 B30-2156-05 D404 B30-2157-05
RSSI
LED LED
BUSY (RED) (GREEN)
PTT
PTT
5C
Q401 RT1N141U Q402 RT1N141U
PF1
DC DC SW1
SW SW
PF2
SW2
LEDTX LEDRX

IC405 30620MCP-***GP
EEPDAT INT TCLK/DTRDO OPTDET
RESET PTT
EEPCLK VOX PF1
RXD PF2
BUSY EN1
BATT EN2
TH_DET RDF/FD
RSSI STD
BSHIFT QT/DQT_IN PLL_UL
MICROPROCESSOR
5T_C APCSW RX_W/N PCTV
5C_C DCSW TX_SW
5R_C QTVCO RX_SW
DTRLOADN QTTCXO PLL_DAT
XOUT TDATA/DTRCLK MIC MUTE PLL_CLK
SCLK DTMF PLL_STB
XIN DIR TXD LEDTX
AF_CONT TX_W/N LEDRX
DI CE CL DO
5M
DI/O

LCD ASSY

B38-0906-15

41
42
Receiver Section
RF (Center Frequency) IF1 (38.85MHz) IF2 (450kHz) AF (1kHz)

-119.5dBm
-104.0dBm

-119.5dBm -120.0dBm -104.0dBm -110.0dBm 290mV 30mV

FM IF SP
AQUA-L
SYSTEM 500mW
C158 C266 C241 Q204 C224 C219 C329 C330
L224 L228 Q205 L211 XF201 Q203 IC201 IC301 IC302
TK-3212/3217

To make measurements in the AF section, connect


the AC level meter. (ANT input: -53dBm, 1kHz FM,
3kHz DEV (WIDE).)
In the RF section, use 1000pF coupling capacitor.
(The display shows the SSG input value required to
obtain 12dB SINAD without local level.)

Transmitter Section
LEVEL DIAGRAM

AF (1kHz) RF (Center Frequency)

16mVrms

206mVrms 3.8dBm 7.3dBm 15.0dBm 31.5dBm 4.0W

MIC AQUA-L VCO


C60 C83 Q9 C87 D101 C107 C112 C158
IC301 Q101 Q102 Q103 L224
D202

AG is set to the MIC input becomes 3kHz DEV at


RXLO
PLL 1kHz MOD.(WIDE)
To make measurements in the AF section, connect
the AC level meter.
In the RF section, use 1000pF coupling capacitor.
TK-3212/3217
KSC-31 / KNB-29N / KBH-10

KSC-31 (RAPID CHARGER) KNB-29N (Ni-MH BATTERY PACK)


■ External View ■ External View ■ Specifications
Voltage ................ 7.2V (1.2V x 6)
Battery capacity ... 1500mAh

■ Specifications
Charging current ................. 850mA ±5% ■ Schematic Diagram
Charging time ..................... KNB-29N : Approx.180 minutes DISCHARGING TERMINALS
Dimensions (Charger only) .... 86.3W x 46.2H x 100.0D (mm)
3-3/8W x 1-7/8H x 4D (inches)
Weight (Charger only) ............ Approx.100g / 0.22 lbs
Breaker
(4N) (75ºC) (2N)

Thermistor
Diode

AXIAL LEADED
INDUCTOR

CHARGING TERMINALS

KBH-10 (BELT CLIP)


■ External View

43
TK-3212/3217
SPECIFICATIONS
General
Frequency Range ............................................................. 450~490MHz (TK-3212(K,M) )
470~512MHz (TK-3212(K2,M2) )
440~480MHz (TK-3217(M) )
Number of Channels ........................................................ Zone : Max.128 per Radio Channel : Max.128 per Zone
Channel Spacing ............................................................... 25kHz (Wide) 12.5kHz (Narrow)
Battery Voltage ................................................................. 7.5 V DC ±20%
Battery Life
(5-5-90 duty cycle, during high power, Battery Saver off) ... KNB-29N(1500mAh) : Approx.10 hours
Operating Temperature Range ......................................... –22˚F to +140˚F (–30˚C to +60˚C)
(+14˚F to +140˚F (–10˚C to +60˚C) when KNB-29N in use)
Frequency Stability ........................................................... ±2.5ppm (–22˚F to +140˚F / –30˚C to +60˚C)
Antenna Impedance ......................................................... 50Ω
Channel Frequency Spread .............................................. 40MHz (TK-3212(K,M) )
42MHz (TK-3212(K2,M2) )
40MHz (TK-3217(M) )
Dimensions (W x H x D)
(Projections not included, Min /Max)
Radio Only ...................................................................... 54 x 122 x 21.1 mm / 57 x 124.5 x 30.1 mm
2-1/8 x 4-13/16 x 13/16 in. / 2-1/4 x 4-7/8 x 1-3/16 in.
With KNB-29N (1500mAh battery) ................................. 54 x 122 x 33 mm / 57 x 124.5 x 42 mm
2-1/8 x 4-13/16 x 1-5/16 in. / 2-1/4 x 4-7/8 x 1-5/8 in.
Weight (net)
Radio Only ...................................................................... 6.3 oz (180g)
With KNB-29N (1500mAh battery) ................................. 13.4 oz (380g)

Receiver (Measurements made per TIA/EIA-603)


Selectivity (12dB SINAD) .................................................. 0.25µV (Wide)/0.28µV (Narrow)
Selectivity ......................................................................... 70dB (Wide)/60dB (Narrow)
Intermodulation ................................................................ 65dB (Wide)/60dB (Narrow)
Spurious Response .......................................................... 65dB
Audio Output (8Ω) ............................................................ 500mW with less than 10% distortion

Transmitter (Measurements made per TIA/EIA-603)


RF Output Power ............................................................. 4W/1W
Spurious Response .......................................................... 65dB
Type of Emission .............................................................. 16K0F3E (Wide)/11K0F3E (Narrow)
FM Hum and Noise .......................................................... 45dB (Wide)/40dB (Narrow)
Audio Distortion ............................................................... Less than 5%

KENWOOD CORPORATION
2967-3, Ishikawa-machi, Hachioji-shi, Tokyo 192-8525, Japan

KENWOOD U.S.A. CORPORATION KENWOOD ELECTRONICS ITALIA S.p.A.


P.O. BOX 22745, 2201 East Dominguez Street, Long Beach, CA 90801-5745, Via G. Sirtori, 7/9 20129 Milano, Italy
U.S.A.
KENWOOD IBERICA S.A.
KENWOOD ELECTRONICS CANADA INC. Bolivia, 239-08020 Barcelona, Spain
6070 Kestrel Road, Mississauga, Ontario, Canada L5T 1S8
KENWOOD ELECTRONICS AUSTRALIA PTY. LTD.
KENWOOD ELECTRONICS DEUTSCHLAND GMBH (A.C.N. 001 499 074)
Rembrücker Str. 15, 63150 Heusenstamm, Germany 16 Giffnock Avenue, Centrecourt Estate, North Ryde, N.S.W. 2113, Australia
KENWOOD ELECTRONICS BELGIUM N.V. KENWOOD ELECTRONICS (HONG KONG) LTD.
Leuvensesteenweg 248 J, 1800 Vilvoorde, Belgium Unit 3712-3724, Level 37, Tower one Metroplaza, 223 Hing Fong Road,
Kwai Fong, N.T., Hong Kong
KENWOOD ELECTRONICS FRANCE S.A.
13, Boulevard Ney, 75018 Paris, France KENWOOD ELECTRONICS SINGAPORE PTE LTD.
1 Ang Mo Kio Street 63, Singapore 569110
KENWOOD ELECTRONICS U.K. LIMITED
KENWOOD House, Dwight Road, Watford, Herts., WD18 9EB, United Kingdom
KENWOOD ELECTRONICS EUROPE B.V.
Amsterdamseweg 37, 1422 AC Uithoorn, The Netherlands

You might also like