CenRF MU RU
CenRF MU RU
CenRF MU RU
1. RF Specification:
Parameter Uplink Downlink
LTE FDD 1800 Band 1710 - 1785 MHz 1805 - 1880 MHz
Frequency Range
LTE FDD 2100 Band 1920 - 1980 MHz 2110 - 2170 MHz
Max. Output Power -10dBm 43dBm/band
Max. Gain 55dB 55dB
ATT Adjustable Range 30dB, Step 1dB 30dB, Step 1dB
ATT Adjustable Error ≤ |±1.5|dB ≤ |±1.5|dB
ALC Range 20dB 20dB
ALC Accuracy ≤ |±2.0| dB ≤ |±2.0| dB
Max. nondestructive input power 20dBm 20dBm
Frequency Error ≤ ±0.05ppm
Intermodulation ≤ -50dBc
ACLR ≥ 45dBc/5MHz; ≥50dBc/10MHz
PCDE ≤ -45dBc
ACPR ≤ -45dBc
EVM ≤ 6%
Ripple In Band LTE FDD 1800 Band ≤ 6dB ≤ 6dB
(p-p) LTE FDD 2100 Band ≤ 5dB ≤ 5dB
7 f _ offset 7 f _ offset
0.05MHz≤f_offset<5.05MHz − 7dBm− ⋅ − 0.05dB − 7dBm− ⋅ − 0.05dB
Spectrum Emission 5 MHz 5 MHz
Mask PAR=8 5.05MHz≤f_offset<10.05MHz -14dBm/100kHz -14dBm/100kHz
10.5MHz≤f_offset<max -15dBm/30kHz -15dBm/30kHz
9kHz~150kHz ≤ -36dBm /1KHz ≤ -36dBm/1KHz
Spurious Emission
150kHz~30MHz ≤ -36dBm/10KHz ≤ -36dBm/10KHz
(at out of band offset
30MHz~1GHz ≤ -36dBm@100KHz ≤ -36dBm@100KHz
±10MHz)
1GHz~12.75GHz ≤ -20dBm@1MHz ≤ -20dBm@1MHz
Time Delay ≤ 5us ≤ 5us
VSWR ≤ 1.5 ≤ 1.5
Noise Figure ≤ 5.0 /
2. Optical Specification:
MU FC/APC * 4, Independent optical path
Optical Connector
RU FC/APC * 1
MU TX: 1550nm / RX: 1310nm, Single Mode
Optical Wavelength
RU TX: 1310nm / RX: 1550nm, Single Mode
MU -2dBm ±3
Optical Output Power
RU 4dBm ±3
Fiber optic path attenuation range 0 to 7dB, Max 10dB
Fiber core number from MU to 1 RU 1 core, Single Mode
4. System Diagram
5. Machine Drawing
MU:
Front panel
Unit:mm
RU:
CenR F
Unit:mm
Unit:mm