SINAMICS G120C

The compact and versatile converter

with optimum functionality

siemens.com/sinamics-g120c
SINAMICS G120C | MEMBER OF THE SINAMICS FAMILY

The compact
converter series
Packed with powerful functions

A wealth of compelling advantages Highlights

The SINAMICS G120C converter is especially compact, deliver-
ing high power density: With seven frame sizes, it covers a Compact > for simple installation in the smallest space
range of power ratings from 0.55 kW to 132 kW (0.75 hp up to
150 hp). Simple commissioning and operation > completely
As true all-rounder, the compact SINAMICS G120C converter intuitive
can address a wide range of applications – e.g. conveyor belts,
mixers, agitators, extruders, pumps, fans, compressors and Perfect integration > in the automation environment
basic machine handling.
Leading-edge technology > for higher energy efficiency
Strong member of the SINAMICS family and safety
The SINAMICS G120C belongs to the SINAMIC family. It
offers the ideal drive for every application, which can be Reliable communication > all common bus systems can
intuitively commissioned using standard tools and oper- be used
ated.

Power range: 0.55 kW to 132 kW (0.75 hp up to 150 hp)

Voltage range: 3AC 380 V ... 480 V (–20 % / +10 %)

with 50/60 Hz +/- 5 %

Control modes: V/f (linear, square law, FCC, ECO),

vector control without encoder (SLVC)

Communication: PROFINET, EtherNet/IP, PROFIBUS,

USS/Modbus RTU

SINAMICS G120C – new frame sizes open up even more

possibilities. Compact, versatile and packed with functions.
Available over the complete power range from 0.55 kW to
132 kW.

Frame size FSAA Frame size FSA Frame size FSB Frame size FSC Frame size FSD Frame size FSE Frame size FSF
0.55 kW to 3 kW to 5.5 kW to 11 kW to 22 kW to 55 kW 75 kW to
2.2 kW 4 kW 7.5 kW 18.5 kW 45 kW 132 kW

2
 THE TYPICAL APPLICATIONS | SINAMICS G120C

The perfect solution to

address countless applications
For a wide range of applications

Much more than compact

SINAMICS G120C is a true all-rounder, combining compact-
ness, high power density and a wide variety of functions to
address many applications. Suitable for continuous motion
with mid-range performance relating to precisely control-
ling torque and speed.

Applications at a glance

Pumping, ventilating and compressing

• Centrifugal pumps
• Radial/axial fans
• Compressors

Moving

• Belt conveyors
• Roller conveyors
• Chain conveyors
• Treadmills
• Bucket conveyors

Processing

• Mills • Agitators
• Mixers • Centrifuges
• Kneaders • Extruders
• Crushers • Rotary furnaces

3
SINAMICS G120C | FEATURES AND BENEFITS

Features Benefits

Compact • Frame size FSAA needs up to 30 % less space • Compact design that requires little space in the
than equivalent converters cabinet and reduces the cost for the electrical
• Frame size FSD to FSF: especially compact with cabinet
integrated DC reactor • Can be used in small control cabinets, close to
• High power density, smaller envelope dimen- the machine
sions • SINAMICS G120C devices can be mounted next
• Side-by-side mounting without derating to one another without derating. This saves
additional space.
• Long service life, high reliability
• Frame sizes FSD to FSF have an integrated DC
reactor so that an input reactor is not required

Simple • Cloning function using BOP-2, IOP or SD card • Standard applications can be easily set up with
commissioning • Optimized parameter set the IOP (Intelligent Operator Panel) using appli-
and operation • Optimized commissioning cation-specific wizards
• Integrated USB port • Intuitive series commissioning, which reduces
• Easy configuration cost and saves time
• Simple and fast software settings
• Simple handling during commissioning and in
operation
• Simplified commissioning with a common hard-
ware configuration for all components. The
converter automatically goes online, even be-
yond network boundaries (routing/remote
maintenance).

Perfect • Fully integrated into the TIA Portal system diag- • Shared data management
integration nostics • Uniform, end-to-end operating concept
• SINAMICS Startdrive – Intuitive converter • Engineering efficiency
engineering and perfect interaction with • Consistent, end-to-end control of the drives
SIMATIC in the Totally Integrated Automation • Coordinated portfolio
Portal • Integrated safety technology
• TIA Portal libary concept • Reliable system diagnostics

Leading-edge • Integrated standard safety feature STO (Safe • No external components required – including
technology Torque Off): Prevents the motor from moving PROFIsafe – thanks to certified Safe Torque Off
unexpectedly and complies with safety standard safety function (STO)
SIL 2 according to EN 61508 respectively PL d, • Fully integrated as standard in the converter
Cat 3 according to EN ISO 13849.
• Energy-efficient, encoderless vector control
- automatic flux reduction with V/F ECO

Reliable • Frame size FSAA to FSC: PROFINET • Uses all of the common bus systems
communication (PROFIEnergy / PROFISafe), PROFIBUS, • Flexible use and simple plug in
USS Modbus RTU, EtherNet/IP • Uninterruptible thanks to the optional
• Frame size FSD to FSF: PROFINET 24V power supply
(PROFIEnergy / PROFISafe / PROFIdrive), • Increased performance with PROFINET
EtherNet/IP • PROFINET profile PROFIsafe: Safety-related
communication – open, integrated and proven
• PROFINET profile PROFIenergy: Communication
with energy saving potentials
• PROFIdrive: Rapid and easy implementation
of drive concepts

4
 IN THE AUTOMATION ENVIRONMENT | SINAMICS G120C

A customized
solution is simply integrated –
thanks to intelligent software

Supported by powerful software tools

SINAMICS G120C converters can be optimally integrated software tools help to make the selection, commissioning,
into the existing automation environment. Innovative and operation as easy and reliable as possible.

Selection

DT Configurator
• Fast product selection and ordering
• The optimum SINAMICS converter is selected to address the specific
requirements of the application
• 2D/3D models, operating, instructions,
data sheets
siemens.com/dt-configurator

SINAMICS SELECTOR App

• Fast and easy converter selection tool for mobile devices
• Conveniently provides the correct article numbers
siemens.com/sinamics-selector

Commissioning, diagnostics & service

SINAMICS StartDrive / STARTER commissioning software

• Integrated and seamless engineering platform for
automation and drive technology
• Intuitive converter engineering and seamless interaction with SIMATIC
in the Totally Integrated Automation Portal
siemens.com/startdrive

Panels
• Commissioning and diagnostics directly at the drive
• Using BOP-2, IOP or SD card

SINAMICS ASSISTANT App

• Converts converter frequency (Hz) to the motor speed as setpoint (rpm)
• Fault code analysis (offline)
• Support function
siemens.com/sinamics-assistant

5
SINAMICS G120C | IN THE AUTOMATION ENVIRONMENT

Optimally integrated
in the automation
Complete motion control solutions

Complete and optimized

With SINAMICS G120C and SIMATIC, Siemens offers compre- Example for SINAMICS G
hensive solutions from a single source for general motion Speed control of a G120C (StartDrive) with S7-1200
control applications. Through the seamless interaction (TIA Portal) via PROFINET/PROFIBUS DP with Safety
between SIMATIC controllers and SINAMICS drive technology Integrated (via terminal) and HMI.
we can provide you with highly efficient systems.
siemens.com/sinamics-applications

The task:

A SIMATIC S7-1200 (TIA Portal) is to cyclically read/write

access SINAMICS G120C process/control data via PROFINET/
1 2
PROFIBUS; data transfer is supported by standard function
blocks.
Implement a speed-controlled machine axis.
5

Our solution:

This example shows a SINAMICS G120C PN/G120C DP

connected to a SIMATIC S7-1212C. The StartDrive option
package is used to configure and integrate the drive into
STEP 7. PROFINET

The configuration is uploaded to the drive via EtherNet/IP

for the PROFINET version, and via USB for the PROFIBUS
version. 3 4

With the function blocks used, you can ...

• Operate the drive using its control word and define
a speed setpoint
• Read the drive status word and the actual speed,
current, torque, fault and alarm values
• Read and write ramp-up and ramp-down time drive 1 SINAMICS G120C with PROFINET
parameters (for example) 2 SIMATIC S7-1200 CPU 121xC
• Read the fault buffer
3 SIMOTICS 1LE standard induction motor
Customer benefits: 4 TIA Portal (PG/PC)

The controller and drive can be intuitively programmed

5 SIMATIC HMI KTP600 Basic Panel
in the standard way using the TIA Portal.

6
 IN THE AUTOMATION ENVIRONMENT | SINAMICS G120C

Teamwork for
perfect integration
SINAMICS G120C and TIA

One operating concept and many benefits

The Totally Integrated Automation Portal (TIA Portal) enables
digitalized automation to be fully accessed – from digital plan-
ning and integrated engineering up to transparent operation.
The TIA Portal can also be used to intuitively integrate SIN-
AMICS G120C drives into the automation and commissioned
them – a process that is especially fast, convenient, and effi-
cient. This is achieved by using the same operating concepts,
and a high degree of user friendliness.
siemens.com/tia
siemens.com/startdrive

Feature Benefit

• Control • Efficient engineering by simply controlling the drives

> SIMATIC technology objects including online synchronization – as well as freely selecting the control type
> DriveLib communication modules
> Safety Integrated communication module
> User-defined control via UDTs and F-UDTs

• Drives are fully integrated into the TIA Portal system • Drive messages in plain text without requiring any
diagnostics engineering are automatically available in the TIA Portal,
control, web server and HMI

•R
 outing across network boundaries • Time-saving as the device can be simply and centrally
accessed – remote maintenance

•P
 arameter download via data block • Simplified series commissioning and replacement of parts

• GSD script already included in STARTER V4.5 • Simple and synchronized telegram configuration be-
tween STARTER and the TIA Portal

•U
 se of the TIA Portal library concept • The library concept guarantees simple reusability of the
converter, including parameter settings and hardware
components

•T
 he SIMATIC Energy Suite - an integrated option for • Energy management efficiently combined with the auto-
TIA Portal mation to increase energy transparency in production

The TIA Portal Info Service

Our TIA Portal Tutorial Center offers a wide range of valu- the general functions and tools of the TIA Portal.
able and detailed information. In addition, we have com- siemens.com/tia-portal-tutorial-center
piled numerous videos that offer a complete overview of

7
SINAMICS G120C | A SYSTEM OVERVIEW

Full range of options

10
Fuse/
circuit breaker
6
Class B line filter
5
Line USB cable
reactor
Controller
BOP-2 IOP
IOP
1
Handheld
SINAMICS
G120C
2 3 4 7
Braking
resistor
PROFINET

8
11
Output
reactor Shield
connection plate

9
Motor

1 SINAMICS G120C (with / without Class A line filter) 7 Braking resistor converts the braking energy into
heat
2 Basic Operator Panel (BOP): user-friendly menu 8 Output reactor reduces the rate of voltage rise
navigation and two-line display. Standard commis- (dv/dt) and the current amplitude
sioning using the cloning function
3 Intelligent Operator Panel (IOP): user-friendly and 9 Standard induction motor for general applications
high-performance operator panel. Simple commis-
sioning of standard applications using application-
specific wizards
4 IOP Handheld: simple local commissioning using the 10 Fuse / circuit breaker: overcurrent protection
handheld version of the Intelligent Operator Panel
(IOP)
5 Line reactor: smoothes the current drawn by the 11 Shield connection plate makes it easier to connect the
converter and thus reduces harmonic components in shields of supply and control cables. Provides mechanical
the line current strain relief and ensures an optimum EMC level
6 Class B line filter to obtain a higher radio interference
class

8
 TECHNICAL DATA | SINAMICS G120C

Technical data
Voltage/frequency 3 AC 380 – 480 V –20 % +10 % with 47/63 Hz +/–5 %
Power range 0.55 – 132 kW/ 0.75 – 150 hp
Overload power For ILO _out (LO¹): 150 % for 3 sec., plus 110 % for 57 sec.
within a 300 sec. load cycle
For IHO _out (HO²): 200 % for 3 sec., plus 150 % for 57 sec.
within a 300 sec. load cycle3
Degree of protection IP20/UL open type
Ambient temperature -10° to 40 °C without derating/up to 60 °C with derating
EMC with Class A filter Device fulfills the requirements according to
EN 61800-3 Category C3 (industrial low-voltage line supplies)
Device complies with the limit values of cable-conducted and radiated interference
voltages according to EN 61800-3 Category C2 (public low-voltage grid)
Motor cable lengths Frame size FSAA: 50 m shielded/100 m unshielded
Frame size FSA-FSC: 150 m shielded/150 m unshielded
Frame size FSD-FSE: 200 m shielded/300 m unshielded
Frame size FSF: 300 m shielded/450 m unshielded
Signal inputs/outputs 6 DI/ 2 DO/ 1 AI/ 1 AO
Safety technology SIL 2 acc. EN 61508, PL d acc. EN ISO 13849, class 3 acc. EN 60204
Control modes Vector, V/f, V/f ECO
Energy functions Energy-saving calculator, energy consumption calculator, automatic flux reduction
Function Fixed speed setpoint, PID controller, motor holding brake control, free functions blocks
Braking Integrated braking chopper
Communication FSAA to FSC available with PROFINET, PROFIBUS, EtherNet/IP, USS/Modbus RTU.
FSD to FSF available with PROFINET

Dimensions

kW Frame size W (mm) H (mm) D (mm)

0.55
0.75
1.1 FSAA 173 155
1.5 73
2.2
3
FSA
4
196
5.5 H
FSB 100
7.5 203
11
15 FSC 140 295
18.5
22
30
FSD 200 472 237
37
45
55 FSE 275 551 237 D
75
90 W
FSF 305 708 357
110
132
1
LO = Low Overload (continous duty)
2
HO = High Overload (cyclic duty)
3
The continuous output current is not reduced when using the overload capability

9
SINAMICS G120C | SELECTION AND ORDERING DATA

SINAMICS G120C – converter 3-phase supply voltage 380 - 480 V SINAMICS G120C – options

Rated Rated Output Output Article number Article number Article number Article number
power power current current Frame Power Modules with
P LO1 P LO1 I LO1_out I HO2_out5 size Unfiltered Power integrated Class B line filter Line reactor 3AC
(kW) (hp) (A) (A) Modules Class A line filter 4 (footprint)7 side-mounted

0.55 0.75 1.7 1.3 FSAA 6SL3210-1KE11-8U 2 6SL3210-1KE11-8A 2 6SL3203-0BE17-7BA0 6SL3203-0CE13-2AA0

0.75 1 2.2 1.7 FSAA 6SL3210-1KE12-3U 2 6SL3210-1KE12-3A 2 6SL3203-0BE17-7BA0 6SL3203-0CE13-2AA0
1.1 1.5 3.1 2.2 FSAA 6SL3210-1KE13-2U 2 6SL3210-1KE13-2A 2 6SL3203-0BE17-7BA0 6SL3203-0CE13-2AA0
1.5 2 4.1 3.1 FSAA 6SL3210-1KE14-3U 2 6SL3210-1KE14-3A 2 6SL3203-0BE17-7BA0 6SL3203-0CE21-0AA0
2.2 3 5.6 4.1 FSAA 6SL3210-1KE15-8U 2 6SL3210-1KE15-8A 2 6SL3203-0BE17-7BA0 6SL3203-0CE21-0AA0
3 4 7.3 5.6 FSA 6SL3210-1KE17-5U 1 6SL3210-1KE17-5A 1 6SL3203-0BE17-7BA0 6SL3203-0CE21-0AA0
4 5 8.8 7.3 FSA 6SL3210-1KE18-8U 1 6SL3210-1KE18-8A 1 6SL3203-0BE17-7BA0 6SL3203-0CE21-0AA0
5.5 7.5 12.5 8.8 FSB 6SL3210-1KE21-3U 1 6SL3210-1KE21-3A 1 6SL3203-0BE21-8BA0 6SL3203-0CE21-8AA0
7.5 10 16.5 12.5 FSB 6SL3210-1KE21-7U 1 6SL3210-1KE21-7A 1 6SL3203-0BE21-8BA0 6SL3203-0CE21-8AA0
11 15 25 16.5 FSC 6SL3210-1KE22-6U 1 6SL3210-1KE22-6A 1 6SL3203-0BE23-8BA0 6SL3203-0CE23-8AA0
15 20 31 25 FSC 6SL3210-1KE23-2U 1 6SL3210-1KE23-2A 1 6SL3203-0BE23-8BA0 6SL3203-0CE23-8AA0
18.5 25 37 31 FSC 6SL3210-1KE23-8U 1 6SL3210-1KE23-8A 1 6SL3203-0BE23-8BA0 6SL3203-0CE23-8AA0
22 25 43 37 FSD New6 6SL3210-1KE24-4U F 1 6SL3210-1KE24-4A F 1 integrated DC choke
30 30 58 43 FSD New 6
6SL3210-1KE26-0U F 1 6SL3210-1KE26-0A F 1 integrated DC choke
37 40 68 58 FSD New6 6SL3210-1KE27-0U F 1 6SL3210-1KE27-0A F 1 integrated DC choke
45 50 82.5 68 FSD New 6
6SL3210-1KE28-4U F 1 6SL3210-1KE28-4A F 1 integrated DC choke
55 60 103 83 FSE New 6
6SL3210-1KE31-1U F 1 6SL3210-1KE31-1A F 1 integrated DC choke
75 75 136 103 FSF New6 6SL3210-1KE31-4U F 1 6SL3210-1KE31-4A F 1 integrated DC choke
90 100 164 136 FSF New 6
6SL3210-1KE31-7U F 1 6SL3210-1KE31-7A F 1 integrated DC choke
110 110 201 164 FSF New6 6SL3210-1KE32-1U F 1 6SL3210-1KE32-1A F 1 integrated DC choke
132 150 237 201 FSF New 6
6SL3210-1KE32-4U F 1 6SL3210-1KE32-4A F 1 integrated DC choke

RS485 with USS/Modbus RTU³ B B

SUB-D with PROFIBUS DP³ P P
PROFINET; EtherNet/IP³ F F

Selecting SIMATIC S7-1200 controllers for SINAMICS G120C

CPU Article number
CPU 1211C 1211 CPU AC/DC/Rly 6ES7 211-1BE40-0XB0
1211 CPU DC/DC/DC 6ES7 211-1AE40-0XB0
1211 CPU DC/DC/Rly 6ES7 211-1HE40-0XB0
CPU 1212C 1212 CPU AC/DC/Rly 6ES7 212-1BE40-0XB0 The selected SIMATIC CPU
1212 CPU DC/DC/DC 6ES7 212-1AE40-0XB0 is only a suggestion.
For more information please refer
1212 CPU DC/DC/Rly 6ES7 212-1HE40-0XB0 to the SIMATIC S7-1200
CPU 1214C 1214 CPU AC/DC/Rly 6ES7 214-1BG40-0XB0 brochure, catalog or web
page:
1214 CPU DC/DC/DC 6ES7 214-1AG40-0XB0
1214 CPU DC/DC/Rly 6ES7 214-1HG40-0XB0 siemens.com/
CPU 1215C 1215 CPU AC/DC/Rly 6ES7 215-1BG40-0XB0 simatic-s7-1200
1215 CPU DC/DC/DC 6ES7 215-1AG40-0XB0
1215 CPU DC/DC/Rly 6ES7 215-1HG40-0XB0
CPU 1217C 1217 CPU DC/DC/DC 6ES7 217-1AG40-0XB0

10
 SELECTION AND ORDERING DATA | SINAMICS G120C

Article number Article number Article number Article number Article number Article number
Shield plate
for Power
Footprint line Braking resistor Footprint braking Output reactor Footprint output Sine-wave filters
Modules
reactor side-mounted resistor side-mounted reactor

6SE6400-3CC00-2AD3 6SL3201-0BE14-3AA0 6SE6400-4BD11-0AA0 6SL3202-0AE16-1CA0 6SE6400-3TC00-4AD2 6SE6400-3TD00-4AD0 included

6SE6400-3CC00-4AD3 6SL3201-0BE14-3AA0 6SE6400-4BD11-0AA0 6SL3202-0AE16-1CA0 6SE6400-3TC00-4AD2 6SE6400-3TD00-4AD0 included
6SE6400-3CC00-4AD3 6SL3201-0BE14-3AA0 6SE6400-4BD11-0AA0 6SL3202-0AE16-1CA0 6SE6400-3TC00-4AD2 6SE6400-3TD00-4AD0 included
6SE6400-3CC00-6AD3 6SL3201-0BE14-3AA0 6SE6400-4BD11-0AA0 6SL3202-0AE16-1CA0 6SE6400-3TC00-4AD2 6SE6400-3TD00-4AD0 included
Drives Options Partner8 6SL3201-0BE21-0AA0 Drives Options Partner8 6SL3202-0AE16-1CA0 included
Drives Options Partner8 6SL3201-0BE21-0AA0 Drives Options Partner8 6SL3202-0AE18-8CA0 included
Drives Options Partner8 6SL3201-0BE21-0AA0 Drives Options Partner8 6SL3202-0AE18-8CA0 included
Drives Options Partner8
6SL3201-0BE21-8AA0 Drives Options Partner 8
6SL3202-0AE21-8CA0 included
Drives Options Partner8 6SL3201-0BE21-8AA0 Drives Options Partner8 6SL3202-0AE21-8CA0 included
Drives Options Partner8
6SL3201-0BE23-8AA0 6SL3202-0AE23-8CA0 included
Drives Options Partner8 6SL3201-0BE23-8AA0 6SL3202-0AE23-8CA0 included
Drives Options Partner8
6SL3201-0BE23-8AA0 6SL3202-0AE23-8CA0 included
JJY: 023422620001 6SE6400-3TC07-5ED0 included
JJY: 023424020001 6SE6400-3TC07-5ED0 included
JJY: 023424020001 6SE6400-3TC07-5ED0 included
JJY: 023434020001 6SE6400-3TC14-5FD0 included
JJY: 023434020001 6SE6400-3TC14-5FD0 included
JJY: 023454020001 6SE6400-3TC14-5FD0 included
JJY: 023454020001 6SE6400-3TC14-5FD0 included
JJY: 023464020001 6SL3000-2BE32-1AA0 included
JJY: 023464020001 6SL3000-2BE32-6AA0 included

Accessories
Operator panels Article number Training Article number
BOP-2 Basic Operator Panel 6SL3255-0AA00-4CA1 Training case SINAMICS G120C PN FSA 6AG1067-2AA00-0AA0
with motor and panels
IOP Intelligent Operator 6SL3255-0AA00-4JA1 Starter kits SINAMICS G120C quick and 6SL3200-0AE31-0AA0
Panel convenient implemantation of drive tasks (without filter)
on TIA Portal
6SL3200-0AE30-0AA0
(PROFINET; 0,55 kW; frame size FSAA)
(with Class A line filter)
including control panel BOP-2
siemens.com/sinamics-starter-kits

¹ LO = Low Overload (continuous operation) ⁵ The continuous output current is not reduced when using the
overload capability
² HO = High Overload (cyclic duty)
6
Available in the 1st half of 2017
³ FSAA to FSC available with PROFINET, PROFIBUS, EtherNet/IP,
USS/Modbus RTU 7
 n unfiltered power module is required for use of the external
A
FSD to FSF available with PROFINET and EtherNet/IP Class B line filter
B = RS485 with USS/Modbus RTU 8
 or detailed information please refer to
F
P = SUB-D with PROFIBUS DB
siemens.com/drives-options-partner
F = PROFINET; EtherNet/IP
For detailed and further information about SINAMICS G120C
⁴ For detailed information on maintaining interference classes,
converter please refer to Catalog D31 or the Siemens Industry Mall
refer to the product documentation
web page: mall.industry.siemens.com

11
There ‫׳‬s more to it:
siemens.com/ids

Discover in detail how

Integrated Drive Systems boost
your competitive edge and
improve your time to profit.

Integrated 
Drive Systems
to go: Visit our
mobile site!

Follow us on:
www.twitter.com/siemensindustry
www.youtube.com/siemens

Published by
Siemens AG 2016
Digital Factory
P.O. Box 31 80
91050 Erlangen, Germany
Subject to changes without prior notice
Article No. E80001-A360-P210-V7-7600
Printed in Germany
Dispo 21500
WÜ/1000173743 WS 11167.0
The information given in this document
only contains general descriptions and/or
performance features which may not always
specifically reflect those described,
or which may undergo modification in
the course of further development of
the products. The requested performance
features are binding only when they are
expressly agreed upon in the concluded Contact person
contract.
For the secure operation of Siemens
products and solutions, it is necessary
to take suitable preventive action (e.g.
cell protection concept) and integrate
each component into a holistic, stateof-
the-art industrial security concept.
Third-party products that may be in use
should also be considered.
For more information about industrial
security, visit
http://www.siemens.com/industrialsecurity