Scribd
Upload
123 views2 pages

M101 PDF

Uploaded by

Soprano Y Plauta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
123 views2 pages

M101 PDF

Uploaded by

Soprano Y Plauta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

M101 PHASE 90

92503016096 revB
M101 PHASE 90
DESCRIPTION POWER DIRECTIONS SPECIFICATIONS 
• Add’s shimmery velocity to The MXR Phase 90 is powered • Run a cable from your guitar Input Impedance 1 MΩ
lead licks and a thick by one 9-volt battery (remove to the Phase 90’s INPUT jack Output Impedance 10 kΩ
swoosh to chords bottom plate to install), a 9-volt and run another cable from the Nominal Intput Level -20 dBV
AC Adapter such as the Dunlop Phase 90’s OUTPUT jack to Nominal Output Level -20 dBV
• Works well with bass, keyboards
ECB003/ECB003EU or a DC Brick™ your amplifier.
and even vocals Noise Floor* -96 dBV
power supply. • Start with the SPEED control
• True bypass at 12 o’clock. Bypass True Hardwire
• Turn the effect on by depressing Current Draw 5 mA
the footswitch. Power Supply 9 volts DC
• Rotate the SPEED knob *A-weighted
clockwise for a faster phase
effect or counterclockwise
CONTROLS for a slower phase effect.
SPEED knob controls
overall effect rate
FOOTSWITCH toggles effect on/
bypass (red LED indicates on)

SAMPLE SETTINGS

CLASSIC 80’s PSEUDO LESLIE YOUR SETTING


ROCK

DUNLOP MANUFACTURING, INC.


P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658

You might also like