Product Specification
5A-75B Receiver Card
Overview
5A-75B receiver card was designed for cost savings to customers, reduce points
of fault and the fault probability.
5A-75B receiver card , based on 5A receiver card, integrate the most common
HUB75, to ensure high-quality display of the premise, more reliable, more worry, more
affordable.
Features
• Integrated HUB75, more convenient and less costly.
• Reduce the plug connectors, reduce points of fault, lower fault probability.
• Superior display quality: high refresh, high intensity, high brightness with the
conventional chips
• Superior compatibility: suitable for all types of display module of the
mainstream products (5A = any row, any column, any scan ,any chips, any
drawn)
• The use of more advanced algorithms, so that the receiving card to maximize
the use of resources in order to improve display quality
• Support for high-precision point-by-point correction in the Brightness and the
color space
• Support for large area display
• Professional design and strict production testing to ensure high quality and
reliable
www.colorlight-led.com Version:V1.4 2015/05/18
Product Specification
Specifications
Control system parameters
iT7 Sender , iQ7 HD Sender, iQ7E UHD Sender, Gigabit NIC, C1
Sending device
Series Sender, T8 , etc.
Control area of every Full-color: 256*256 Pixels, for special applications the column can be
card extended to 1024 pixels.
Correction area of every
256*256 Pixels
card
Cascade control area of
65536*65536 pixels
the largest regional
Cascade card number 65536 PCS
Network port exchange support
Synchronization Nanosecond synchronization between the card and the card
Display Quality
Refresh rate for Static: 64*64, 4000Hz-12000Hz
conventional chip 1/8 scan: 128*128, 500Hz-3200Hz
Serial frequency 0.2MHz-41.7MHz
Gradation 65536
Minimum unit of OE
8ns, 8ns multiples steps
values
Gray scale
Each level grayscale separate compensation
compensation
Display module compatibility
Support conventional chips, PWM chips, lighting chips and other
Chip supports
mainstream chips.
Support hundreds of different specifications of the PWM chip, such as
PWM chip supports
MBI5042 (requires a separate program)
Scan mode Two scanning methods to support refresh rate multiplier
Scan type Support static sweep to 1/32 scan
module specifications
Support 4096 pixels within any row, any column
Support
Support route from left to right, from right to left, from top to bottom, from
The direction of the cable
bottom to top.
Data Sets 16 RGB data sets
Data folded Support to the fold, reverse fold, with the already discounted, such as
www.colorlight-led.com Version:V1.4 2015/05/18
Product Specification
refresh rate significantly improved.
Data exchange 16 sets of data any exchange
Module snapshot Support any pumping point
Data serial transmission RGB, R8G8B8, R16G16B16, etc. in the form of serial
Support the D signal as a clock extension, the total amount of data can
Data Expansion
be extended to 32.
Compatible device and interface type
UTP cable≤140M
Communication distance CAT6 cable≤170M
OPTIC FIBER transmission distance unrestricted
Compatible with
Gigabit switch, fiber transceiver, optical switches.
transmission equipment
power interface Wire terminal
HUB Interface Type HUB75
Physical parameters
Size 143* 93mm
Input voltage DC 3.3V-6V
Rated current 0.6A
Rated power 3W
Storage and transport
-50℃ to 125℃
temperature
Operating Temperature -25℃ to 75℃
Body static resistance 2KV
Weight 100g
Monitoring function (in conjunction with multi-function card)
Monitoring functions Temperature, humidity, smoke, relay switch
pixel level calibration
Brightness calibration Support
Chromaticity calibration Support
Other features
Double backup Support
Any offset of the 16sets of data, drawn at random points, the
Shaped screen
performance of data exchange control profiled screen.
www.colorlight-led.com Version:V1.4 2015/05/18
Product Specification
Hardware
① ⑧
③
②
⑥ ⑦
1、Interface
S/N Name Function Remarks
Connect DC5V power supply for the
1 Power 1
receiver card
Only one is used.
Connect DC5V power supply for the
2 Power 2
receiver card
Indicate power and signal transmission red for power,
3 Indicate lamp
status green for signal
The dual network ports can
4 Network port A RJ45，For transmitting data signals achieve import/export at
random, which can be
identified in an intelligent
5 Network port B RJ45，For transmitting data signals
way by the system.
The attached test procedures can
achieve four kinds of monochrome
6 Test button display (red, green, blue and white), as
well as horizontal, vertical and other
display scan modes.
External Two kinds of interface
7 For Indicate lamp and test button
interfaces definitions
HUB75 Interface, connected to display
8 HUB pins
modules
www.colorlight-led.com Version:V1.4 2015/05/18
Product Specification
2、Indicator Light functions
Red: ON for power available
Green: ON/OFF quick flash (about 5-10 times/second) indicates that the
data signal transmission is normal.
3、Definitions of HUB75
Data signal Scanning signal Control signal
GD1 GND GD1 GND B D LAT GND
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15
RD1 BD1 RD1 BD1 A C CLK OE
Data signal Scanning signal Control signal
Note: Onboard HUB75 Interface Contains D scanning signal, supporting 1/16 scan
display.
4、Figure for receiving card size and hole position
Unit: mm
www.colorlight-led.com Version:V1.4 2015/05/18
