Scribd
Upload
410 views2 pages

DR63L4

This document provides technical specifications for an SEW Eurodrive GmbH & Co KG DR 63L 4 motor. Some key details include: - It is a 0.25 kW, 220/440V, 60Hz, 1600 rpm induction motor designed for continuous duty (S1). - It has an IP55 degree of protection, IC411 fan cooling, and operates between -20°C to +40°C. - Starting and load characteristics including 1.8 starting torque ratio, 1.7 pull-up torque ratio, and 1.8 pull-out torque ratio are provided.

Uploaded by

Ramiro Sew Eurodrive
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
410 views2 pages

DR63L4

This document provides technical specifications for an SEW Eurodrive GmbH & Co KG DR 63L 4 motor. Some key details include: - It is a 0.25 kW, 220/440V, 60Hz, 1600 rpm induction motor designed for continuous duty (S1). - It has an IP55 degree of protection, IC411 fan cooling, and operates between -20°C to +40°C. - Starting and load characteristics including 1.8 starting torque ratio, 1.7 pull-up torque ratio, and 1.8 pull-out torque ratio are provided.

Uploaded by

Ramiro Sew Eurodrive
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Motor data sheet

DR 63L 4 Page 1/2

1 Designation
1.1 Manufacturer SEW Eurodrive GmbH & Co KG
1.2 Type DR 63L 4
1.3 Type of construction M1
1.4 Electrical standard IEC
1.5 Connection diagram DT76
1.6 Equivalent IEC frame size 63
1.7 Type of motor Cage induction motor
1.8 Duty type S1

2 Rating
2.1 Output power 0.25kW
2.2 Rotor speed 1600min-1
2.3 Torque 1.49Nm
2.4 Voltage 220/440V
2.5 Frequency 60Hz

3 Design
3.1 Degree of protection IP55
3.2 Method of cooling IC411 (fan-cooled)
3.3 Ambient temperatur -20°C to +40°C

4 Operation characteristics
4.1 Rated current 1.24//0.62A
4.2 Load table

Perc. rated load 100%


Current [A] 1.24//0.62

Speed min-1 1600

Power factor 0.81

Efficiency A* [%] -

input power [kW] -


A* IEC 60034-2-1 Ed.1 (2007)/PLL from Residual Losses
Motor data sheet

DR 63L 4 Page 2/2

5 Starting characteristics
5.1 Starting torque ratio 1.8
5.2 Pull-up torque ratio 1.7
5.3 Pull-out torque ratio 1.8
5.4 Locked rotor current ratio 3.1
5.5 Perm. no-load starts 8000h-1
5.6 KVA letter D

6 Winding and insulation


6.1 Winding type single speed
6.2 Connection YY/Y
6.3 Winding resist. cold 43,90 Ohm at 20°C
6.4 Thermal class F
6.5 Thermal protection -

7 Design details
7.1 Direction of rotation both
7.2 Inertia rotor 0,000440kgm2

8 Standard bearing sizes


8.1 Bearing A flange-mounted motor 6203-2Z-J
8.2 Bearing A gearmotor 6303-2Z-J
8.3 Bearing A foot-mounted motor -
8.4 Bearing B motor w/o brake 6202-2Z-J
8.5 Bearing B brake motor 6202-2RS-J-C3

You might also like