Booster Compressors

N Series
Pressures to 650 psig
Capacities: 5.7 to 819 cfm

kaeser.com
Booster Compressors
High pressure systems from Kaeser
PET plastics, molding, leak testing and other special applications require higher pressures than
typical plant air systems can provide. In these cases, it is often effective and economical to take
a portion of the existing plant air and apply a booster compressor sized specifically for the high
pressure application. The alternatives of either installing a stand-alone high pressure compressor or
operating the whole plant at high pressure are costly and wasteful.

Kaeser offers reciprocating booster compressors to increase air system pressure as high as 650
psig. These reliable units are compact, quiet, and offer an excellent alternative for producing high
pressure. Simply install a Kaeser Booster to efficiently increase the pressure of the general plant
compressed air to higher pressures as needed.

This method is ideal and economical for many applications where only a small to moderate amount
of high pressure air is needed.

Kaeser has the ability to design a complete compressed air system to meet both your plant air
and high pressure requirements. We offer a full line of system components including high pressure
dryers, filters, and drains to achieve the high production quality you demand.

Schematic of Plant Air System with Booster

Main Plant Air System High Pressure System

Pressure (e.g. 100 psig)

Users
Pre-filter

High Pressure
Filter

Booster Compressor High Pressure High Pressure Air

Storage Dryer
NOTE: All components must be properly pressure-rated. Schematic does not show recommended accessories such as system
controllers, drains, flow controller, or condensate management system.

2
3
N 60-G and N 153-G Booster
N 60-G and N 153-G booster compressors are well suited to applications needing modest air volumes at
pressures to 580 psig. N 60-G maximum outlet pressure is 500 psig. Mounted on heavy-gauge baseplates
with anti-vibration pads, Kaeser boosters eliminate the need for reinforced foundations and floor fastenings.
Premium efficiency TEFC motors provide energy savings and extend equipment life. Aluminum cylinder
heads and finned copper cooling pipes promote efficient aftercooling for longer duty cycles.

Additional features
These units include a high pressure discharge hose with
check valve for flexible connection to the system. Inlet filters
with automatic drain traps remove contaminants to protect the
booster and improve compressed air quality. All components
are arranged for both safety and easy service.

Standard Starter Panel

Kaeser offers an enhanced starter control panel to monitor and
regulate booster operation. The starter is designed to be wall-
mounted.

4
High quality components Advanced cylinder Effective cooling
Our high pressure pumps feature lower technology The rugged aftercooler in our two-
rotational speeds to promote extended Kaeser industrial booster cylinders are cylinder machines is efficient and main-
operational life and consistent efficiency. bored with super precision and finished tenance free, achieving low compressed
by a special process that ensures air outlet temperatures.
minimum oil consumption and negligible
wear for great durability.

Manual belt tensioning Electric motor Low vibration

A simple slide based v-belt tensioner Our premium, TEFC motors have class Our boosters are built on durable steel
makes it easy to adjust belt tension and F insulation and are EISA compliant. base frames with anti-vibration mounts
avoid misalignment. 3-phase, 60 Hz in 230, 460 or 575 V are for quiet, smooth operation.
standard.

5
N 253-G to N 2001-G
For larger volumes of air, Kaeser’s Extra Pressure models offer a combination of higher flows and increased
discharge pressures to 650 psig.* Mounted on heavy-gauge steel bases with vibration isolators, these units
offer smooth, quiet operation and eliminate the need for reinforced foundations and floor fastenings.

All Kaeser boosters feature precision manufactured pumps with high quality cylinders.

Premium efficiency TEFC motors offer energy savings and long equipment service life. The automatic belt
drive tensioning system ensures consistent efficient power transmission and prolonged belt life. Other
features, such as controls and coolers, have been enhanced to meet the demands of larger applications.
*N 2001-G max outlet pressure is 360 psig

Air-cooled with a two-speed,

fan-powered aftercooler

Air-cooled with water-cooled

aftercooler

6
Durable high pressure Low discharge temperatures Water-coooled aftercooler
pumps A generously proportioned aftercooler A water-cooled aftercooler is offered
Our high pressure pumps feature lower keeps the compressed air outlet on the N 2001-G to achieve discharge
rotational speeds to promote extended temperatures comfortably low on air- approach temperatures as low as 11°F.
operational life and consistent efficiency. cooled models.

Automatic belt tensioning Forced lubrication Instrument panel

V-belt drive with an easily accessible A forced lubrication system provides Our standard instrument panel contains
automatic tensioning device provides increased reliability and service life of the gauges for air temperature, oil pressure,
optimum power transfer and long belt pump. Full-flow filtration extends the oil inlet air pressure, and discharge air
life. change interval. pressure.

7
Technical Specifications
Max.
Inlet Rated Motor Dimensions*
Discharge Weight
Model Pressure Power WxDxH
Pressure (lb.)
(psig) (hp) (in.)
(psig)
N 60-G** 500 3 36 x 18 x 21½ 154
N 153-G** 580 3 and 5 54½ x 28½ x 32½ 562
N 253-G** 10 and 15 54½ x 29 x 32 639
N 351-G** 45-190 650 15 and 20 61 x 34½ x 40½ 915
N 502-G** 15, 20, and 25 62 x 34¾ x 40¼ 1014
109½ x 39½ x 41 2624
N 2001G 360 50
78 x 39½ x 40*** 2271

* Dimensions shown are for units with air-cooled aftercoolers, unless otherwise specified.
** Not available with water-cooled aftercoolers.
*** With water-coooled aftercooler
Special models available for nitrogen.

Specifications are subject to change without notice.

H H

W D
D
W
N 60-G and N 153-G, air-cooled N 253-G up to N 502-G, air-cooled

www.kaeser.com

Kaeser Compressors, Inc. Kaeserr Compressors Canada InInc. Kaeser Compresores de México Kaeser Compresores de
511 Sigma Drive 3760 La Vérendrye Street S de RL de CV Guatemala y Cia. Ltda.
Fredericksburg, VA 22408 USA Boisbriand,
ian
nd QC J7H 1R1R5 CANADA
5 CANA
CA Calle 2 #123 Calz. Atanasio Tzul 21-00, zona 12
Telephone: 540-898-5500 Telephone: (450) 971-1414 Parque Industrial Juríca El Cortijo II, Bodega 501
Toll Free: 800-777-7873 Toll free: (800) 477-1416 76100 Querétaro, Qro. 01012–Guatemala City
[email protected] [email protected] Telephone: 01 (442) 218 64 48 Telephone: +502 2412-6000
[email protected] [email protected]

© 2017 Kaeser Compressors, Inc. All rights reserved. 06/17

USBOOSTERS