Scribd Logo
Upload

Welcome to Scribd!

  • 381 views

    Project Industrial Safety Engineering

    Uploaded by

    Mohammad Liftawi
    This document outlines the requirements for an industrial engineering safety audit project at Jordan University of Science and Technology. Students must conduct a safety audit at an approved location and write a report on their findings. The report must include a checklist of 10-20 safety questions, photos from the audit, suggested solutions to any safety issues found, and concluding remarks. Reports must be 6-11 pages long and are due by December 26, 2019. Students can complete the project individually or in groups of up to two students. The project aims to evaluate students' understanding of safety standards and issues.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Project Industrial Safety Engineering

    Uploaded by

    Mohammad Liftawi
    381 views3 pages
    This document outlines the requirements for an industrial engineering safety audit project at Jordan University of Science and Technology. Students must conduct a safety audit at an approved location and write a report on their findings. The report must include a checklist of 10-20 safety questions, photos from the audit, suggested solutions to any safety issues found, and concluding remarks. Reports must be 6-11 pages long and are due by December 26, 2019. Students can complete the project individually or in groups of up to two students. The project aims to evaluate students' understanding of safety standards and issues.

    Original Description:

    Rww

    Original Title

    Project Industrial Safety Engineering (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Read this document in other languages

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the requirements for an industrial engineering safety audit project at Jordan University of Science and Technology. Students must conduct a safety audit at an approved location and write a report on their findings. The report must include a checklist of 10-20 safety questions, photos from the audit, suggested solutions to any safety issues found, and concluding remarks. Reports must be 6-11 pages long and are due by December 26, 2019. Students can complete the project individually or in groups of up to two students. The project aims to evaluate students' understanding of safety standards and issues.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    381 views3 pages

    Project Industrial Safety Engineering

    Uploaded by

    Mohammad Liftawi
    This document outlines the requirements for an industrial engineering safety audit project at Jordan University of Science and Technology. Students must conduct a safety audit at an approved location and write a report on their findings. The report must include a checklist of 10-20 safety questions, photos from the audit, suggested solutions to any safety issues found, and concluding remarks. Reports must be 6-11 pages long and are due by December 26, 2019. Students can complete the project individually or in groups of up to two students. The project aims to evaluate students' understanding of safety standards and issues.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Jordan University of Science and Technology (JUST)

    Faculty of Engineering
    Industrial Engineering Department

    IE-555 Safety Engineering and Management Project


    First Semester 2019-2020

    1. Find or decide on a place to do a safety audit, you can choose from the list of suggested
    projects, or choose your place (Open-your choice).
    2. Create a checklist that contains 10-20 questions from OSHA Self-Inspection Checklist
    (Appendix –A in the course manual). Choose questions carefully, that are relevant to the
    place you are going to do your safety audit on it.
    3. After inspection, lack of safety features should be addressed by suggesting similar solutions
    to the one you studied in this course from the course manual (do not use your imagination)
    4. Write a report that consists of the following:
     The cover page contains the name of the place, your name, and student number, you
    can add the university name logo, etc. [one page]
     The checklist used, answered (i.e. filled with your findings) [one or two pages]
     Pictures from the place you inspect (not from the internet) [one page, as appropriate]
     The solution to the lack of safety features you find in the report be brief and use
    bullet points). [one or two pages]
     Conclusion remarks (a few statements) to describe your experience in this project.
    [one or two pages]
    – Your report should be presented professionally, a minimum of 6 pages and 11 pages
    maximum, including the cover page.
    – Marking will be on the content, following instruction and presentation of the report. The
    report is worth 20% of the course total mark.
    – Each student should do his/her report in a group of two student’s maximum or solo report.
    – Report materials will be checked for plagiarism, similar reports (not similar topic) by
    students would attract zero marks.
    – You must add a proof of visiting the place of inspection, photos including selfie at the end of
    the report as an appendix.
    – No reports will be considered for marking after the due date and time or failure to submit.
    – Due date: Thursday 26 / 12 /2019 midnight.
    Engineering Project Assessment

    Teamwork and project management:

    The most important way to start an effective project quickly is to:


    (a) Decide some directions towards the ultimate objective so that work can start without
    detailed planning. Collect information, previous work, etc.
    (b) Devise a series of achievable objectives and decide how to achieve them.
    (c) Write this up in the form of a ‘Project Planner’.

    To promote teamwork, make sure all members know how to contact each other, and who is
    responsible for doing each part of the work. Meet regularly in person or by telephone, but not for
    long. Usually’ a 15 – 20-minute meeting is sufficient. If matters take longer to resolve, ask the
    people involved to work on their arguments or justifications in their own time and arrange another
    meeting in a few days to decide the issue.

    Report:

    Your reports should be assessed on the following basis:


    (a) Depth of coverage - extent to which you have researched the problem by reading or by
    interviewing relevant contacts. Remember to cite all sources as references where they used
    in the text, and list the references at the end.
    (b) Your own opinions and evaluation of the different approaches used (in the conclusion
    section). Write this using the 'first-person' (e.g. in my/our opinion, this strategy flawed
    because, etc.)
    (c) Presentation- including the use of English language, spelling, punctuation, layout, etc.
    Reports do not have to be typed - neat handwriting is quite acceptable (if it is readable).
    (d) Diagrams - clarity and layout - ensure that diagrams reproduced from other sources
    acknowledged as such (e.g. Diagram from ...). Remember to exclude details, which are not
    relevant to the explanations in the text. Preparing illustrations and drawings usually takes
    about 40-50% of the time needed to write your report.

    Coverage of the Issues:

    Make sure you have covered the issues. Re-read instructions on what you need to write about
    before you finish drafting the report. If in doubt, ask me to check the report (at least one week)
    before you hand it in.

    Every student (or a group) has to select one of the listed topics or create his topic related to the
    course contents. The students (or the group) requested to write a comprehensive technical report
    about the selected topic, as per guidelines.
    Suggested projects

    Project location: Visit Ministry of labor in Jordan and OSHA websites


    Topic: Compare and write about the covering of industrial safety issues, compare between
    information obtained from the websites and differences.
    http://www.mol.gov.jo/ http://www.osha.gov/index.html

    Project location: Visit a Medical Centre at JUST.


    Topic: Examine the safety standards at the center. Write about issues the center concerns about
    the safety of personnel, patients and the general environment.

    Project location: Visit central workshop at JUST.


    Topic: Examine the safety standards at the workshop. Write about issues the workshop concerns
    about the safety of personnel, visitors and general environment.

    Project location: Visit the Maintenance Department at JUST.


    Topic: Examine the safety standards in the department. Write about issues the department
    concerns about the safety of personnel, clients and general environment.

    Project location: Visit restaurants and cafeterias at JUST.


    Topic: Examine the safety standards at the premises. Write about issues the food services about
    the safety of personnel, clients and general environment.

    Project location: Visit Chemical Department laboratories at JUST.


    Topic: Examine the safety standards at the premises. Write about issues of the laboratories about
    the safety of personnel, students and the general environment.

    Project location: Visit Mechanical Engineering Department laboratories at JUST.


    Topic: Examine the safety standards at the premises. Write about issues of the laboratories about
    the safety of personnel, students and the general environment.

    Project location: Visit Social Security Corporation in Jordan and OSHA websites
    Topic: Compare and Write about the worker’s compensation, information's, compare between and
    differences
    http://www.ssc.gov.jo/ http://www.osha.gov/index.html

    Project location: Visit an Industrial firm.


    Topic: Examine the safety standards at the premises. Write about issues about the safety of
    personnel, visitors and general environment.

    Enjoy...Good luck to all of you.

    You might also like