MERITOR® 14X™ DRIVE AXLE

PARTS

PB-1218
 TABLE OF CONTENTS
Model Nomenclature .................................................................. 3

TANDEM FORWARD CARRIER

Carrier and Cap/Inter-Axle Diff Shift .............................................. 4
Front Cover and Pump Assembly .................................................. 5
Input Shaft and Inter-Axle Diff...................................................... 6
Forward Tandem — Main Diff...................................................... 8
Main Diff Case ........................................................................ 10
Thru Shaft Assembly ................................................................. 12
Driver Controlled Diff Lock (DCDL) ................................................ 14

TANDEM AMBOID REAR CARRIER

Amboid Tandem Rear Carrier and input .......................................... 16
Amboid Tandem Rear — Main Diff ................................................ 18

TANDEM/SINGLE HYPOID REAR CARRIER

Hypoid Rear Carrier and Bearing Cage ........................................... 20
Hypoid Rear — Main Diff ........................................................... 22
Hypoid Driver Controlled Diff Lock (DCDL) Bolt-on Design .................... 24
Hypoid Driver Controlled Diff Lock (DCDL) Screw-in Design .................. 26

Main Diff and Diff Case Assemblies ................................................ 28

Gear Sets................................................................................ 30
Service Kits ............................................................................. 30

TECHNICAL PUBLICATIONS (availble online @ meritor.com - Literature on Demand)

Yoke Installation Tool Instructions (TP10164)
Tools for Servicing Meritor MT-14X Series Differential Carriers (TP1202)
Input Adjusting Ring Leak Repair Procedure (TP1214)

2 U.S. 888-725-9355
Canada 800-387-3889
 MERITOR MT-14X DRIVE AXLE MODEL NOMENCLATURE

U.S. 888-725-9355 MeritorPartsOnline.com 3

Canada 800-387-3889
 CARRIER AND CAP/INTER-AXLE DIFF SHIFT

Carrier and Cap Components

ITEM DESCRIPTION PART NUMBER - LESS DIFF LOCK PART NUMBER - WITH DIFF LOCK QUANTITY
20K 22K 20K 22K
1 Carrier and Cap A2-3200-K-2221 A2-3200-C-2239 A2-3200-N-2224 A2-3200-D-2240 1
2 • Leg cap - Not Sold Separately — 2
3 • Bolt - Leg Cap MS220120-1 4
4 • Washer - Leg Cap 42-X-1021 4
5 Jam Nut - Thrust Screw — 41X-1702 — 41X-1702 1
6 Thrust Screw — 40X-1016 — 40X-1016 1
7 Screw - Diff Bearing Adjusting Ring Lock 41-X-1669 4
8 Lock - Diff Bearing Adjusting Ring 1220-P-1108 2

Inter-Axle Diff Shift Components

ITEM DESCRIPTION PART NUMBER QUANTITY
9 Spring 2258-N-1262 1
10 Shift Fork 3296-A-1379 1
11 Shim 2803-A-3641 As Required
12 Push Rod 2244-Z-1274 1
Kit -IAD O-Rings KIT 2917
13 • O-Ring - IAD Shift Piston • 5X-1153 1
14 • O-Ring - Carrier to Cover - IAD Shift Bore • 5X-1368 1
• O-Ring - Carrier to Cover - IAD Shift Bore • 5X-1414 1
(Select Appropriate O-Ring to Match Channel in Carrier & Cap)
15 Piston 2230-Y-1377 1
4 U.S. 888-725-9355
Canada 800-387-3889
 FRONT COVER AND PUMP ASSEMBLY

FORWARD
Non-Pump Cover

To convert to pump use:

A-3226-P-1550 Cover
A-3297-X-1610 Input Shaft
A-2297-D-5334 Screen
3278-K-1207 Spider

Front Cover and Pump Components

ITEM DESCRIPTION LESS PUMP WITH PUMP
Part Number Quantity Part Number Quantity
1 Screw - Front Cover MS212035-2 10 MS212035-2 10
2 Washer - Front Cover 1229-D-4632 10 1229-D-4632 10
3-11 Cover Assembly - Complete with Pump (not shown) A-3226-P-1550 1
3 Cover 3226-M-1547 1
4 • Pump • A-3303-R-1032 1
5 • Screw MS208016A-1 3 • MS208016A-1 8
6 • Washer 1229-E-1669 3 • 1229-E-1669 8
7 • Oil Baffle or Pump Cover 3221-K-1025 1 • A-3266-Q-1499 1
8 • Valve - Pressure Relief • 2297-U-5273 1
9 • Spring - Pump • 2258-Z-1118 1
10 • Washer - Sealing Ring • 1229-F-4062 1
11 • Plug - Pressure Relief • 1250-N-1080 1
12 Plug - Plastic - Front Cover 1250-Z-572 1 1250-Z-572 1
13 Screen - Pump Filter A-2297-D-5334 1
U.S. 888-725-9355 MeritorPartsOnline.com 5
Canada 800-387-3889
 INPUT SHAFT AND INTER-AXLE DIFF

6 U.S. 888-725-9355
Canada 800-387-3889
 Input Shaft and Inter-Axle Diff Components

FORWARD
ITEM DESCRIPTION LESS PUMP WITH PUMP
Part Number Quantity Part Number Quantity
Kit -Input Yoke Nut & Washer KIT 2826 1 KIT 2826 1
1 • Nut - Input Yoke • 40X-1233 1 • 40X-1233 1
2 • Washer - Input Yoke • 1229-N-1730 1 • 1229-N-1730 1
3 Oil Seal - Input Yoke A1-1205-X-2728 1 A1-1205-X-2728 1
4 Adjusting Ring - Input Shaft 2214-W-1271 1 2214-W-1271 1
5 Bearing Cup - Input Shaft - Fwd 1228-U-1217 1 1228-U-1217 1
6 Screw - Input Shaft Adj Ring Lock MS208016A-1 1 MS208016A-1 1
7 Lock - Input Shaft Adjusting Ring 1220-T-1112 1 1220-T-1112 1
8 Bearing Cone - Input Shaft - Fwd A-1228-W-1713 1 A-1228-W-1713 1
9 Clutch Collar - Inter Axle Diff 3107-U-1269 1 3107-U-1269 1
10 Input Shaft 3297-D-1616 1 A-3297-X-1610 1
• Ball - Input Shaft (not shown) • 1228K37 1
11 Needle Bearing - Input Shaft 1228-G-1723 2 1228-G-1723 2
12 Snap Ring - Needle Bearing 2297-S-5349 1 2297-S-5349 1
13 Thrust Bearing - Input Shaft 1228-F-1722 1 1228-F-1722 1
14 Drive Gear 3892-F-5908 1 3892-F-5908 1
Inter-Axle Diff Assembly A-3235-V-3012 1 A1-3235-V-3012 1
15 • Diff Pinion - Inter-Axle Diff • 2233-P-1030 4 • 2233-P-1030 4
16 • Spider - Inter-Axle Diff • 3278-J-1206 1 • 3278-K-1207 1
17 • Inter- Axle Diff Case • 3235-V-3012 1 • 3235-V-3012 1
18 Rear Side Gear - Inter-Axle Diff 2234-L-1442 1 2234-L-1442 1
19 Bearing Cone - Rear Side Gear A-1228-P-1940 1 A-1228-P-1940 1
20 Bearing Cup - Rear Side Gear 1228-N-1938 1 1228-N-1938 1

U.S. 888-725-9355 MeritorPartsOnline.com 7

Canada 800-387-3889
 FORWARD TANDEM — MAIN DIFF

8 U.S. 888-725-9355
Canada 800-387-3889
 Forward Tandem — Main Diff Components

FORWARD
ITEM DESCRIPTION PART NUMBER QUANTITY
Kit -Pinion Nut And Washer Included In Gear Set KIT 2638 1
1 • Nut - Pinion • 40X-1233 1
2 • Washer - Pinion • 1229-W-4521 1
3 Bearing Cone - Pinion - Outer A1-1228-G-605 1
4 Bearing Cup - Pinion - Inner 1228-F-604 1
5 Kit -Pinion Bearing Spacers Use 2 As Required KIT 2396 1
• Spacer - Pinion Bearing 5.30mm/.209 inch • 2203-D-9806 2
• Spacer - Pinion Bearing 5.33mm/.210 inch • 2203-E-9807 2
• Spacer - Pinion Bearing 5.35mm/.211 inch • 2203-F-9808 2
• Spacer - Pinion Bearing 5.38mm/.212 inch • 2203-G-9809 2
• Spacer - Pinion Bearing 5.40mm/.213 inch • 2203-H-9810 2
• Spacer - Pinion Bearing 5.50mm/.217 inch • 2203-J-9812 2
• Spacer - Pinion Bearing 5.60mm/.220 inch • 2203-K-9813 2
• Spacer - Pinion Bearing 5.70mm/.224 inch • 2203-L-9814 2
• Spacer - Pinion Bearing 5.80mm/.228 inch • 2203-M-9815 2
• Spacer - Pinion Bearing 5.90mm/.232 inch • 2203-N-9816 2
• Spacer - Pinion Bearing 6.00mm/.236 inch • 2203-P-9818 2
• Spacer - Pinion Bearing 6.10mm/.240 inch • 2203-Q-9819 2
• Spacer - Pinion Bearing 6.13mm/.241 inch • 2203-R-9820 2
• Spacer - Pinion Bearing 6.15mm/.242 inch • 2203-S-9821 2
• Spacer - Pinion Bearing 6.18mm/.243 inch • 2203-T-9822 2
• Spacer - Pinion Bearing 6.20mm/.244 inch • 2203-U-9823 2
6 Driven Gear 3892-J-5912 1
7 Spacer - Inner Pinion Bearing 1244-V-1764 1
Kit -Inner Pinion Bearing Cup Shims Use as Required KIT 1647 1
8 • Shim - Inner Pinion Bearing Cup .075mm/.003 inch • 2203-F-2788 3
• Shim - Inner Pinion Bearing Cup .125mm/.005 inch • 2203-G-2789 2
• Shim - Inner Pinion Bearing Cup .250mm/.010 inch • 2203-H-2790 4
9 Bearing Cup - Pinion - Inner 1228-Z-1716 1
10 Bearing Cone - Pinion - Inner A-1228-A-1717 1
11 Adjusting Ring - Main Diff 2214-G-1255 2
12 Bearing Cup - Main Diff 1228-Q-1473 2
13 Bearing Cone - Main Diff A-1228-R-1474 2
14-25 See Next Page - Main Diff Case
26 Diff Lock Clutch Collar Diff Lock Only 3107-U-1321 1
27 Gear Set See Page 30 1

U.S. 888-725-9355 MeritorPartsOnline.com 9

Canada 800-387-3889
 MAIN DIFF CASE

10 U.S. 888-725-9355
Canada 800-387-3889
 Diff Case Assemblies

FORWARD
ITEM DESCRIPTION RATIOS PART NUMBER — PART NUMBER — QUANTITY
LESS DIFF LOCK WITH DIFF LOCK
14-25 Main Diff Assembly — See Diff Cases Page 29 All
14-17 Diff Case Assembly — See Diff Cases Page 29 All
14 Diff Case - Flange Half 2.47 - 2.64 3235-A-2783 1
3.08 - 3.36 3235-C-2785
3.42 - 4.11 3235-E-2787
4.33 - 7.17 3235-G-2789
15 Diff Case - Plain Half All 3235-J-2792 3235-Q-2799 1

Main Diff
ITEM DESCRIPTION PART NUMBER PART NUMBER QUANTITY
20K 22K
Kit -Diff Case Bolts KIT 2819 1
16 • Bolt - Diff Case • 41-X-1327 16
17 • Washer - Diff Case • 1229-D-4632 16
Kit -Main Diff KIT 4778 KIT 4809 1
18 • Thrust Washer - Main Diff Side Gear • 1229-Q-5087 • 1229-Q-5087 2
19 • Side Gear - Main Diff • 2234-G-1437 • 2234-U-1451 2
20 • Thrust Washer - Main Diff Pinion • 1229-R-1032 • 1229-R-1032 4
21 • Spider - Main Diff • 3278-S-305 • 3278-Y-1117F 1
22 • Pinion Gear - Main Diff • 2233-J-1024 • 2233-X-1116 4
Kit -Bolt Kit -Diff Case to Gear — 2.47 - 2.64 KIT 4779 1
23 • Bolt - Diff Case to Gear • 41X-1715 12
Kit -Bolt Kit -Diff Case to Gear — 3.08 - 7.17 KIT 2317 1
23 • Bolt - Diff Case to Gear • 41X-1216 12
24 • Washer - Diff Case to Gear • 1229-U-1503 12
25 • Nut - Diff Case to Gear • 40X-1182 12

U.S. 888-725-9355 MeritorPartsOnline.com 11

Canada 800-387-3889
 THRU SHAFT ASSEMBLY

12 U.S. 888-725-9355
Canada 800-387-3889
 Thru Shaft Assembly Components

FORWARD
ITEM DESCRIPTION PART NUMBER QUANTITY
1 Washer - Thru Shaft Bearing Cage 1229-K-1597 4
2 Capscrew - Thru Shaft Bearing Cage 15X-387 4
Kit -Complete Thru Shaft A17-3226-T-1112K 1
3 • Oil Seal • A1-1205-Y-2729 1
4 • Bearing Cage • 3226-T-1112 1
5 • Bearing Cup • 1228-K-1545 2
6 • Thru Shaft • 3297-M-1599 1
7 • Bearing Cone • A-1228-L-1546 2
8 • Kit -Snap Ring • KIT 576 1
• Snap Ring - .155 • 1229-P-2590 1
• Snap Ring - .158 • 1229-Q-2591 1
• Snap Ring - .161 • 1229-R-2592 1
• Snap Ring - .164 • 1229-S-2593 1
• Snap Ring - .167 • 1229-U-2595 1
• Snap Ring - .170 • 1229-V-2596 1
• Snap Ring - .173 • 1229-W-2597 1
• Snap Ring - .176 • 1229-X-2598 1
• Snap Ring - .179 • 1229-Y-2599 1
• Snap Ring - .182 • 1229-T-2594 1
9 • Snap Ring/Yoke Spacer • 1229-W-4131 1
• Kit -Thru Shaft Nut and Washer • KIT 2637 1
10 • Washer • 1229-T-1736 1
11 • Nut • 40X-1237 1

U.S. 888-725-9355 MeritorPartsOnline.com 13

Canada 800-387-3889
 DRIVER CONTROLLED DIFF LOCK (DCDL)

14 U.S. 888-725-9355
Canada 800-387-3889
 Driver Controlled Diff Lock (DCDL) Components

FORWARD
Complete Diff Lock - KIT 4782 (Bolted)
ITEM DESCRIPTION PART NUMBER QUANTITY
1 Kit -Diff Lock Switch KIT 4429 1
• Diff Lock Switch • 3237-R-1292 1
• Pigtail - Diff Lock Switch - Not Shown Separately • 3237-X-1298 1
2 Shim (Use as Required) 2803-A-3641 3
3 Spring 2258-N-1262 1
4 Shift Fork 3296-C-1381 1
5 Piston 2230-Y-1377 1
6 Gasket - Diff Lock Cover 2208-Q-1005 1
7 Caging Bolt - Manual Engaging 41X-1368 1
8 O-Ring 5-X-521 1
9 Plug - Capscrew 41X-1742 1
10 Capscrew - Diff Lock Cover 41X-1669 4
11 Washer - Diff Lock Cover MWA-506 4
12 Cover - Diff Lock 3266-X-1610 1
13 O-Ring - Diff Lock Piston 5X-888 1
14 Push Rod 2244-N-1236 1
15 Collar 3107-U-1321 1

Complete Diff Lock - KIT 2932 (Screw-on)

ITEM DESCRIPTION PART NUMBER QUANTITY
1 Kit -Diff Lock Switch KIT 4429 1
• Diff Lock Switch • 3237-R-1292 1
• Pigtail - Diff Lock Switch - Not Shown Separately • 3237-X-1298 1
2 Shim (Use as Required) 2803-A-3641 3
3 Spring 2258-N-1262 1
4 Shift Fork 3296-C-1381 1
5 Piston 2230-Y-1377 1
6 Caging Bolt - Manual Engaging 41X-1368 1
7 O-Ring 5-X-521 1
8 Plug - Capscrew 41X-1742 1
9 3266-Q-1681 1
10 O-Ring 5X-1433 1
11 O-Ring 5X-1153 1
12 Push Rod 2244-Z-1274 1
13 Collar 3107-U-1321 1

U.S. 888-725-9355 MeritorPartsOnline.com 15

Canada 800-387-3889
 AMBOID TANDEM REAR CARRER AND INPUT

16 U.S. 888-725-9355
Canada 800-387-3889
 Amboid Tandem Rear Carrier and Input Components

ITEM DESCRIPTION PART NUMBER QUANTITY

1 Oil Seal A1-1205-Z-2730 1

AMBOID REAR
2 Bearing Cone - Outer Pinion A1-1228G605 1
3 Bearing Cup - Outer Pinion 1228-F-604 1
4 Carrier And Cap A2-3200G2217 1
5 Washer • 42X-1021 4
6 Bolt • MS220120-1 4
7 Thrust Block 2297-P-8336 1
8 Jam Nut 40X-1016 1
9 Thrust Screw 10X-1710 1
10 Kit -Pinion Bearing Spacers KIT 2541 1
Spacer - Pinion Bearing 9.40mm/.370 inch • 1244-M2-431 2
Spacer - Pinion Bearing 9.43mm/.371 inch • 1244-N-2432 2
Spacer - Pinion Bearing 9.45mm/.372 inch • 1244-P-2434 2
Spacer - Pinion Bearing 9.48mm/.373 inch • 1244-Q-2435 2
Spacer - Pinion Bearing 9.50mm/.374 inch • 1244-R-2436 2
Spacer - Pinion Bearing 9.60mm/.378 inch • 1244-S-2437 2
Spacer - Pinion Bearing 9.70mm/.382 inch • 1244-T-2438 2
Spacer - Pinion Bearing 9.80mm/.386 inch • 1244-U-2439 2
Spacer - Pinion Bearing 9.90mm/.390 inch • 1244-V-2440 2
Spacer - Pinion Bearing 10.00mm/.394 inch • 1244-W-2441 2
Spacer - Pinion Bearing 10.10mm/.398 inch • 1244-X-2442 2
Spacer - Pinion Bearing 10.20mm/.402 inch • 1244-Y-2443 2
Spacer - Pinion Bearing 10.23mm/.403 inch • 1244-Z-2444 2
Spacer - Pinion Bearing 10.25mm/.404 inch • 1244-A-2445 2
Spacer - Pinion Bearing 10.28mm/.405 inch • 1244-B-2446 2
Spacer - Pinion Bearing 10.30mm/.406 inch • 1244-C-2447 2
11 Spacer - Inner Pinion Bearing 1244-F-2346 1
12 Kit -Shims - Pinion Bearing KIT 1647 1
Shim . 076mm/.003 inch • 2203-F-2788 3
Shim .127mm/.005 inch • 2203-G-2789 2
Shim . 254mm/.010 inch • 2203-H-2790 4
13 Bearing Cup - Inner Pinion 1228-Z-1716 1
14 Bearing Cone - Inner Pinion A-1228A1717 2
15 Screw - Diff Adjusting Ring Lock 41X-1669 2
16 Lock - Diff Adjusting Ring 1220-P-1108 4

U.S. 888-725-9355 MeritorPartsOnline.com 17

Canada 800-387-3889
 AMBOID TANDEM REAR — MAIN DIFF

18 U.S. 888-725-9355
Canada 800-387-3889
 Diff Components
ITEM DESCRIPTION PART NUMBER QUANTITY
1 Adjusting Ring - Main Diff 2214-G-1255 2
2 Bearing Cup - Main Diff 1228-Q-1473 2
3 Bearing Cone - Main Diff A1-1228-R-1474 2

AMBOID REAR
Diff Case Assemblies
ITEM DESCRIPTION RATIOS PART NUMBER QUANTITY
4-12 Main Diff Assembly 2.47 - 264 A1-3235-A-2783 1
3.08 - 3.36 A1-3235-C-2785 1
3.42 - 4.11 A1-3235-E-2787 1
4-7 Diff Case Assembly 2.47 - 2.64 A-3235-A-2783 1
3.08 - 3.36 A-3235-C-2785
3.42 - 4.11 A-3235-E-2787
4 Diff Case - Plain Half All 3235-J-2792 1
5 Diff Case - Flange Half 2.47 - 2.64 3235-A-2783 1
3.08 - 3.36 3235-C-2785
3.42 - 4.11 3235-E-2787

6-7 Kit -Diff Case Bolts All KIT 2819 1

6 Bolt - Diff Case • 41X-1327 16
7 Washer - Diff Case • 1229-D-4632 16

Main Diff Components

ITEM DESCRIPTION PART NUMBER QUANTITY
8-12 Kit -Main Diff KIT 4778 1
8 Thrust Washer - Main Diff Side Gear • 1229-Q-5087 2
9 Spider - Main Diff • 3278-S-305 1
10 Thrust Washer - Main Diff Pinion • 1229-R-1032 4
11 Side Gear - Main Diff • 2234-G-1437 2
12 Pinion Gears - Main Diff • 2234-J-1024 4
13 Kit -Bolt Kit -Diff Case to Gear — 2.47 -2.64 KIT 4779 1
13 Bolt • 41X-1715 12
13-15 Kit -Bolt Kit -Diff Case to Gear — 3.08 - 4.11 KIT 2317 1
13 Bolt • 41X-1216 12
14 Washer • 1229-U-1503 12
15 Nut • 40X-1182 12
16 Gear Set - See Gear Sets - Page 30 1
Kit -Pinion Nut and Washer KIT 2637 1
17 Pinion Washer • 1229-T-1736 1
18 Pinion Nut • 40X-1237 1

U.S. 888-725-9355 MeritorPartsOnline.com 19

Canada 800-387-3889
 HYPOID REAR CARRIER AND BEARING CAGE

20 U.S. 888-725-9355
Canada 800-387-3889
 Hypoid Rear Carrier and Bearing Cage Components

ITEM DESCRIPTION REMARKS PART NUMBER QUANTITY

1 End Yoke See Bill Of Material 1

HYPOiD REAR
2 Seal - Input Yoke A1-1205-Z-2730 1
3 Bearing Cone - Pinion - Outer A-1228-N-2068 1
4 Bolt - Bearing Cage MS212045-1 1
5 Washer - Bearing Cage 1229-D-4632 1
6 Bearing Cage Assemby A-3226-M-1053 1
7 Bearing Cup - Pinion - Outer 1228-U-645 1
8 Bearing Cup - Pinion - Inner 1228-F-604 1
9 Kit -Shim - Pinion Bearing Cage KIT 2313 1
Shim - Pinion Bearing Cage . 075mm/.003” • 2803-Q-2851 3
Shim - Pinion Bearing Cage .125mm/.005” • 2803-R-2852 2
Shim - Pinion Bearing Cage .250mm/.010” • 2803-S-2853 4
Shim - Pinion Bearing Cage .500mm/.020” • 2803-T-2854 1
10 Kit -Pinion Bearing Spacers Use 2 As Req’d KIT 2322 1
Spacer - Pinion Bearing 8.75mm/.345” • 2203-J-9474 2
Spacer - Pinion Bearing 8.78mm/.346” • 2203-K-9475 2
Spacer - Pinion Bearing 8.80mm/.347” • 2203-L-9476 2
Spacer - Pinion Bearing 8.83mm/.348” • 2203-M-9477 2
Spacer - Pinion Bearing 8.85mm/.349” • 2203-N-9478 2
Spacer - Pinion Bearing 8.98mm/.354” • 2203-P-9480 2
Spacer - Pinion Bearing 9.10mm/.358” • 2203-Q-9481 2
Spacer - Pinion Bearing 9.13mm/.359” • 2203-R-9482 2
Spacer - Pinion Bearing 9.15mm/.360” • 2203-S-9483 2
Spacer - Pinion Bearing 9.18mm/.361” • 2203-T-9484 2
Spacer - Pinion Bearing 9.20mm/.362” • 2203-U-9485 2
11 Bearing Cone - Pinion - Inner A1-1228-G-605 1
12 Carrier And Cap 20K Less Diff Lock A2-3200-L-1676 1
20K With Diff Lock A2-3200-A-8269 1
22K Less Diff Lock A2-3200-U-1919 1
22K With Diff Lock A2-3200-D-2266 1
13 Washer - Leg Cap 42X-1021 4
14 Bolt - Leg Cap MS220120-1 4
15 Screw - Main Diff Adjusting 41X-1637 2
Ring Lock
16 Jam Nut - Thrust Screw 22K Only 41X-1371 1
17 Thrust Screw 22K Only 40X-1016 1

U.S. 888-725-9355 MeritorPartsOnline.com 21

Canada 800-387-3889
 HYPOID REAR — MAIN DIFF

22 U.S. 888-725-9355
Canada 800-387-3889
 Diff Components
ITEM DESCRIPTION REMARKS LESS DIFF LOCK WITH DIFF LOCK QUANTITY
1 Adjusting Ring - Main Diff Right Hand - Plain Half 2214-C-1095 2214-Y-1039 1
Left Hand - Flange Half 2214-C-1095 1

HYPOiD REAR
2 Bearing Cup Right Hand - Plain Half 1228-L-1728 1228-F-1982 1
Left Hand - Flange Half 1228-L-1728 1
3 Bearing Cone Right Hand - Plain Half A-1228-M-1729 A-1228-G-1983 1
Left Hand - Flange Half A-1228-M-1729 1
4 Clutch Collar - Not Shown Diff Lock Only 3107-D-1018 1

Diff Case Assemblies

ITEM DESCRIPTION RATIOS LESS DIFF LOCK WITH DIFF LOCK QUANTITY
20K 22K 20X 22K
5-12 Main Diff Assembly — See Diff Cases
Page 29
5-8 Diff Case Assembly — See Diff Cases
Page 29
5 Diff Case - Plain Half All 3235-J-2064 3235-U-2153 3235-T-1918 3235-V-2154 1
6 Diff Case - Flange Half 2.47 - 2.64 3235-V-1920 3235-V-1920 1
3.08 - 3.36 3235-S-1839 3235-S-1839
3.42 - 4.11 3235-U-1841 3235-D-2188 3235-U-1841 3235-D-2188
4.33 - 7.17 3235-W-1843 3235-T-2152 3235-W-1843 3235-T-2152
Kit -Diff Case Bolts All KIT 2819 1
7 • Bolt - Diff Case • 41X-1327 16
8 • Washer - Diff Case • 1229-D-4632 16

Main Diff Components

ITEM DESCRIPTION 17K 20K 22K QUANTITY
Kit -Main Diff KIT 2389 KIT 2310 KIT 2696 1
9 • Pinion Gear - Main Diff • 2233-J-1024 • 2233-J-1024 • 2233-X-1116 4
10 • Spider - Main Diff • 3278-S-305 • 3278-S-305 • 3278-Y-1117F 1
11 • Thrust Washer - Main Diff Pinion • 1229-R-1032 • 1229-R-1032 • 1229-R-1032 4
12 • Side Gear - Main Diff • 2234-M-1469 • 2234-G-1437 • 2234-U-1451 2
13 • Thrust Washer - Main Diff • 1229-Q-5087 • 1229-Q-5087 • 1229-Q-5087 2
Side Gear
Kit -Bolt Kit -Diff Case to Gear KIT 2317 1
14 • Bolt - Diff Case to Gear • 41X-1216 12
15 • Washer - Diff Case to Gear • 1229-U-1503 12
16 • Nut - Diff Case to Gear • 40X-1182 12
17 Snap Ring - Spigot Bearing 46X-1084 1
18 Spigot Bearing 1228-F-552 1
19-21 Gear Set See Page 30 1
• Kit -Pinion Nut And Washer KIT 2637 1
20 • Washer - Pinion • 1229-T-1736 1
21 • Nut - Pinion • 40X-1237 1

U.S. 888-725-9355 MeritorPartsOnline.com 23

Canada 800-387-3889
 HYPOID DRIVER CONTROLLED DIFF LOCK (DCDL)
BOLT-ON DESIGN

24 U.S. 888-725-9355
Canada 800-387-3889
 Hypoid Driver Controlled Diff Lock (DCDL) Components

HYPOiD REAR
PART NUMBER PART NUMBER
ITEM DESCRIPTION 2.00 - 39 DIFF SPLINE 2.10 - 41 DIFF SPLINE QUANTITY
Kit -Complete Diff Lock Components KIT 4786 KIT 4785 1
1 Kit -Diff Lock Switch KIT 4429 KIT 4429 1
• Diff Lock Switch • 3237-R-1292 • 3237-R-1292 1
• Pigtail - Diff Lock Switch - Not Shown Separately • 3237-X-1298 • 3237-X-1298 1
2 Washer 1229-U-1503 1229-U-1503 1
3 Spring 2258-L-714 2258-L-714 1
4 Shift Fork 3296-Z-1300 3296-Z-1300 1
5 Pin 43X-1006 43X-1006 1
6 Tube 3196-S-1137 3196-S-1137 1
7 Piston 2230-N-170 2230-N-170 1
8 Copper Gasket - Diff Lock Cover 2208-H-944 2208-H-944 1
9 Caging Bolt - Manual Engaging 41X-1333 41X-1333 1
10 Washer - Diff Lock Cover MWA-506 MWA-506 4
11 O-Ring 2208-L-1000 2208L1000 1
12 Plug (Capscrew) - Inlet MS210016-1 MS210016-1 1
13 Screw - Diff Lock Cover MS206045-1 MS206045-1 4
14 Cover - Diff Lock 3266-F-1020 3266-F-1020 1
15 O-Ring - Diff Lock Piston 5X-1153 5X-1153 1
16 O-Ring - Tube 5X-1288 5X-1288 1
17 Push Rod 2244-Z-52 2244-Z-52 1
18 Clutch Collar 3107-H-1334 3107-D-1018 1

U.S. 888-725-9355 MeritorPartsOnline.com 25

Canada 800-387-3889
 HYPOID DRIVER CONTROLLED DIFF LOCK (DCDL)
SCREW-IN DESIGN

26 U.S. 888-725-9355
Canada 800-387-3889
 Hypoid Driver Controlled Diff Lock (DCDL) 22K Components

HYPOiD REAR
ITEM DESCRIPTION PART NUMBER QUANTITY
Kit -Complete Diff Lock Components KIT 2662 1
1 • Kit -Diff Lock Switch • KIT 4429 1
• Diff Lock Switch • 3237-R-1292 1
• Pigtail - Diff Lock Switch - Not Shown Separately • 3237-X-1298 1
2 • Spring • 2258-N-1262 1
3 • Shift Fork • 3296-Z-1170 1
4, 5 • Kit -Diff Lock Shift Cylinder • KIT 2824 1
6 • O-Ring • 5X-521 1
7 • Caging Bolt - Manual Engaging • 41X-1368 1
8 • Clutch Collar • 3107-D-1018 1

U.S. 888-725-9355 MeritorPartsOnline.com 27

Canada 800-387-3889
 MAIN DIFF AND DIFF CASE ASSEMBLIES

Main Diff Case - Items 1-8

Diff Case - Items 1-4

28 U.S. 888-725-9355
Canada 800-387-3889
 Main Diff and Diff Case Assembly Components
AXLE DIFF SPLINE RATIOS MAIN DIFF ASSEMBLY DIFF CASE ASSEMBLY
Includes Items 1-8 Includes Items 1-4
LESS DCDL WITH DCDL LESS DCDL WITH DCDL
FORWARD TANDEM
TANDEM FORWARD 2.10-41 247-264 A1-3235-A-2783 A3-3235-A-2783 A-3235-A-2783 A-2-3235-A-2783
""R"" WHEEL END 279-285 A1-3235-B-3174 A3-3235-B-3174 A-3235-B-3174 A-2-3235-B-3174
307-336 A1-3235-C-2785 A3-3235-C-2785 A-3235-C-2785 A-2-3235-C-2785
342-411 A1-3235-E-2787 A3-3235-E-2787 A-3235-E-2787 A-2-3235-E-2787

MAIN DIFF
433-717 A1-3235-G-2789 A3-3235-G-2789 A-3235-G-2789 A-2-3235-G-2789
TANDEM FORWARD (22K) 2.10-41 390-411 A4-3235-E-2787 A5-3235-E-2787 A-3235-E-2787 A-2-3235-E-2787
""R"" WHEEL END 433-586 A4-3235-G-2789 A5-3235-G-2789 A-3235-G-2789 A-2-3235-G-2789
AMBOID REAR
TANDEM REAR 2.10-41 247-264 A1-3235-A-2783 NA* A-3235-A-2783 NA*
""R"" WHEEL END 279-285 A1-3235-B-3174 NA* A-3235-B-3174 NA*
307-336 A1-3235-C-2785 NA* A-3235-C-2785 NA*
342-411 A1-3235-E-2787 NA* A-3235-E-2787 NA*
HYPOID REAR
SINGLE REAR ONLY 2.00-39 247-293 A10-3235-V-1920 A5-3235-V-1920 A8-3235-V-1920 A-2-3235-V-1920
""L"" WHEEL END 307-336 A10-3235-S-1839 A5-3235-S-1839 A8-3235-S-1839 A-2-3235-S-1839
342-411 A10-3235-U-1841 A5-3235-U-1841 A8-3235-U-1841 A-2-3235-U-1841
433-717 A10-3235-W-1843 A5-3235-W-1843 A8-3235-W-1843 A-2-3235-W-1843
SINGLE OR TANDEM REAR 2.10-41 247-293 A9-3235-V-1920 A3-3235-V-1920 A8-3235-V-1920 A-2-3235-V-1920
""R"" WHEEL END
307-336 A9-3235-S-1839 A3-3235-S-1839 A8-3235-S-1839 A-2-3235-S-1839
342-411 A9-3235-U-1841 A3-3235-U-1841 A8-3235-U-1841 A-2-3235-U-1841
433-717 A9-3235-W-1843 A3-3235-W-1843 A8-3235-W-1843 A-2-3235-W-1843
TANDEM REAR (22K) 2.10-41 390-411 A10-3235-D-2188 A11-3235-D-2188 A-3235-D-2188 A-2-3235-D-2188
""R"" WHEEL END 433-586 A10-3235-T-2152 A11-3235-T-2152 A-3235-T-2182 A-2-3235-T-2152

*NA = Not Applicable — Diff Lock option not offered in Amboid Rear.

U.S. 888-725-9355 MeritorPartsOnline.com 29

Canada 800-387-3889
 GEAR SETS
RATIO FORWARD AMBOID REAR HYPOID REAR
228 B-44570-1F-228 B-44574-1R-228
247 B-43498-1F-247 B-43498-1R-247
264 B-43500-1F-264 B-43500-1R-264 B-41716-1R-264
279 A-44440-1F-279 A-44440-1R-279
285 A-44524-1F-285 A-44524-1R-285
308 A-42200-1F-308 A-42200-1R-308 A-43608-1R-308
325 A-43502-1F-325 A-43502-1R-325 A-43610-1R-325
336 A-42202-1F-336 A-42202-1R-336 A-43612-1R-336
342 A-43752-1F-342 A-43752-1R-342 A-41164-1R-342
355 A-42204-1F-355 A-42204-1R-355 A-43614-1R-355
370 B-42206-1F-370 A-42206-1R-370 B-43616-1R-370
390 B-42180-1F-390 A-42180-1R-390 B-41684-1R-390
411 B-42128-1F-411 A-42128-1R-411 B-41686-1R-411
433 B-41278-1F-433 B-41266-1R-433
463 B-41280-1F-463 B-41268-1R-463
488 B-41282-1F-488 B-41270-1R-488
513 A-41272-1R-513
529 B-41284-1F-529 B-41274-1R-529
557 A-41304-1R-557
586 B-41466-1F-586 B-41456-1R-586
614 A-41468-1F-614 A-41458-1R-614
643 A-41470-1F-643 A-41460-1R-643
683 A-41472-1F-683 A-41462-1R-683
717 A-41474-1F-717 B-43426-1R-717

30 U.S. 888-725-9355
Canada 800-387-3889
 SERVICE KITS
DESCRIPTION FORWARD AMBOID REAR HYPOID REAR
KIT 4841 KIT 4842 KIT 4843
Seal And Bearing Kits
Diff Lock KIT 4844
"L" Wheel End KIT 2389
Main Diff KIT "R" Wheel End KIT 4778 KIT 4778 KIT 2310
"R" Wheel End (22K) KIT 4809 KIT 2696
KIT 4785
“R” Wheel End (Bolt-On) KIT 4782
KIT 4786
Diff Lock (DCDL)
“R” Wheel End (Screw-In) KIT 2932 KIT 2662 (2.1” - 41)
“L” Wheel End (Screw-In) KIT 2926 (2” - 39)
Diff Lock Switch KIT 4429 KIT 4429
Diff Case Bolts KIT 2819
KIT 2317 (3.08 - 7.17) KIT 2317 (3.08 - 4.11) KIT 2317 (2.64 - 7.17)
Gear to Case Bolts
KIT 4779 (2.47 - 2.64) KIT 4779 (2.47 - 2.64) KIT 2317 (2.64 - 7.17)

GEAR SETS
IAD O-Rings KIT 2917
A-3235-A-2779
IAD KIT
Diff Lock A1-3235-A-2779
Input Shaft - Nut & Washer KIT 2826
Pinion - Nut & Washer KIT 2638 KIT 2637
Shims - Pinion Bearing KIT 1647 KIT 2313
Spacers - Pinion Bearing KIT 2396 KIT 2541 KIT 2322
Thru Shaft A17-3226-T-1112K
Thru Shaft Snap Rings KIT 576

U.S. 888-725-9355 MeritorPartsOnline.com 31

Canada 800-387-3889
 SERVICE KITS BILL OF MATERIALS
PART NUMBER DESCRIPTION QUANTITY PART NUMBER DESCRIPTION QUANTITY
A-3235-W-2779 IAD Less Pump KIT 2317 Gear to Case Bolts
2233-P-1030 Pinion Gear - IAD 4 41-X1216 Bolt - Gear to Case 12
3278-J-1206 Spider - IAD 1 1229-U-1503 Washer - Gear to Case 12
3235-W-2779 IAD Case 1 40-X-1182 Nut - Gear to Case 12
A1-3235-W-2779 IAD With Pump KIT 2322 Pinion Bearing Spacers
2233-P-1030 Pinion Gear - IAD 4 2203-J-9474 Spacer - .345 2
3278-K-1207 Spider - IAD 1 2203-K-9475 Spacer - .346 2
3235-W-2779 IAD Case 1 2203-L-9476 Spacer - .347 2
A17-3226-T-1112K Thru Shaft 2203-M-9477 Spacer - .348 2
A1-1205-Y-2729 Oil Seal 1 2203-N-9478 Spacer - .349 2
3226-T-1112 Bearing Cage 1 2203-P-9480 Spacer - .354 2
1228-K-1545 Bearing Cup 2 2203-Q-9481 Spacer - .358 2

GEAR SETS
3297-M-1599 Thru Shaft 1 2203-R-9482 Spacer - .359 2
A-1228-L-1546 Bearing Cone 2 2203-S-9483 Spacer - .360 2
KIT 576 Kit -Snap Ring 1 2203-T-9484 Spacer - .361 2
1229-P-2590 Snap Ring - .155 1 2203-U-9485 Spacer - .362 2
1229-Q-2591 Snap Ring - .158 1 KIT 2389 Diff Kit -2.00-39 Spline
1229-R-2592 Snap Ring - .161 1 2234-M-1469 Side Gear 2
1229-S-2593 Snap Ring - .164 1 3278-S-305 Spider 1
1229-U-2595 Snap Ring - .167 4 2233-J-1024 Pinion Gear 4
1229-V-2596 Snap Ring - .170 4 1229-Q-5087 Thrust Washer - Side Gear 2
1229-W-2597 Snap Ring - .173 1 1229-R-1032 Thrust Washer - Pinion 4
1229-X-2598 Snap Ring - .176 1 KIT 2396 Pinion Bearings Spacers
1229-Y-2599 Snap Ring - .179 1 2203-D-9806 Spacer - .209 2
1229-T-2594 Snap Ring - .182 1 2203-E-9807 Spacer - .210 2
1229-W-4131 Snap Ring 1 2203-F-9808 Spacer - .211 2
1229-T-1736 Washer 1 2203-G-9809 Spacer - .212 2
40-X-1237 Nut 1 2203-H-9810 Spacer - .213 2
KIT 1647 Pinion Bearing Shims 2203-J-9812 Spacer - .217 2
2203-F-2788 Shim - .003 3 2203-K-9813 Spacer - .220 2
2203-G-2789 Shim - .005 2 2203-L-9814 Spacer - .224 2
2203-H-2790 Shim - .010 4 2203-M-9815 Spacer - .228 2
KIT 2310 Diff Kit -2.10-41 Spline 2203-N-9816 Spacer - .232 2
2234-G-1437 Side Gear 2 2203-P-9818 Spacer - .236 2
3278-S-305 Spider 1 2203-Q-9819 Spacer - .240 2
2233-J-1024 Pinion Gear 4 2203-R-9820 Spacer - .241 2
1229-Q-5087 Thrust Washer - Side Gear 2 2203-S-9821 Spacer - .242 2
1229-R-1032 Thrust Washer - Pinion 4 2203-T-9822 Spacer - .243 2
KIT 2313 Pinion Bearing Shims 2203-U-9823 Spacer - .244 2
2803-Q-2851 Shim - .003 3
2803-R-2852 Shim - .005 2
2803-S-2853 Shim - .010 4
2803-T-2854 Shim - .020 1

U.S. 888-725-9355 MeritorPartsOnline.com 32

Canada 800-387-3889
 SERVICE KITS BILL OF MATERIALS
PART NUMBER DESCRIPTION QUANTITY PART NUMBER DESCRIPTION QUANTITY
KIT 2541 Pinion Bearing Spacers KIT 2696 Diff Kit -2.10-41 Spline (22K)
1244-M-2431 Spacer - .370 2 2234-U-1451 Thrust Washer - Side Gear 2
1244-N-2432 Spacer - .371 2 3278-Y-1117 Side Gear 2
1244-P-2434 Spacer - .372 2 2233-X-1116 Thrust Washer - Pinion 4
1244-Q-2435 Spacer - .373 2 1229-Q-5087 Spider 1
1244-R-2436 Spacer - .374 2 1229-R-1032 Pinion Gear 4
1244-S-2437 Spacer - .378 2 KIT 2819 Diff Case Bolts
1244-T-2438 Spacer - .382 2 2297-F-6324 Loctite - Diff Case 1
1244-U-2439 Spacer - .386 2 41-X-1327 Bolt - Diff Case 16
1244-V-2440 Spacer - .390 2 1229-D-4632 Washer - Diff Case 16
1244-W-2441 Spacer - .394 2 KIT 2826 Input Shaft Nut & Washer
1244-X-2442 Spacer - .398 2 40-X-1233 Nut - Input Yoke 1
1244-Y-2443 Spacer - .402 2 1229-N-1730 Washer - Input Yoke 1
1244-Z-2444 Spacer - .403 2 KIT 2917 IAD O-Rings
1244-A-2445 Spacer - .404 2 5X-1153 O-Ring - IAD Shift Piston 1
1244-B-2446 Spacer - .405 2 5-X-1368 O-Ring - Carrier IAD Bore 1
1244-C-2447 Spacer - .406 2 5-X-1414 O-Ring - Carrier IAD Bore 1
KIT 2637 Pinion Nut And Washer KIT 4429 Diff Lock Switch
40-X-1237 Nut 1 3237-R-1292 Switch 1
1229-T-1736 Washer 1 3237-X-1298 Pigtail 1
KIT 2638 Pinion Nut And Washer KIT 4778 Diff Kit -2.10-41 Spline
40-X-1233 Nut - Input Yoke 1 1229-Q-5087 Thrust Washer - Side Gear 2
1229-W-4521 Washer - Input Yoke 1 2234-G-1437 Side Gear 2
KIT 2662 (2.1” - 41) Diff Lock - Screw-In Design 1229-R-1032 Thrust Washer - Pinion Gear 4
3107-D-1018 Clutch Collar 1 3278-S-305 Spider 1
A-3261-A-1067 Shift Cylinder 1 2233-J-1024 Pinion Gear 4
2244-Z-1222 Push Rod 1 KIT 4779 Gear to Case Bolts
3296-Z-1170 Shift Fork 1 41-X-1715 Bolt - Gear to Case 12
KIT 4429 Diff Lock Switch 1 KIT 4782 Diff Lock - Forward Rear (Bolt-On0
3237-R-1292 Switch 1 KIT 4429 Kit -Diff Lock Switch 1
3237-X-1298 Wire Harness 1 3237-R-1292 Switch 1
2258-N-1262 Spring 1 3237-X-1298 Pigtail 1
2257-M-1235 Clip 1
5-X-521 O-Ring 1
41-X-1368 Caging Bolt 1
KIT 2926 (2” - 39) Diff Lock - Screw-in Design
3296-Z-1170 Shift Fork 1
3107-H-1334 Collar 1
2244-Z-1222 Push Rod 1
2258-N-1262 Spring 1
A-3261-A-1067 Shift Cylinder 1
5-X-521 O-Ring 1
41-X-1368 Caging Bolt 1
KIT 4429 Diff Lock Switch 1
3237-R-1292 Switch 1
3237-X-1298 Wire Harness 1
33 U.S. 888-725-9355
Canada 800-387-3889
 SERVICE KITS BILL OF MATERIALS
PART NUMBER DESCRIPTION QUANTITY PART NUMBER DESCRIPTION QUANTITY
2803-A-3641 Shim 3 KIT 4785 (Bolt-On) Diff Lock Kit - 2.10-41 Spline
2258-N-1262 Spring 1 3296-Z-1300 Shift Fork 1
3296-C-1381 Shift Fork 1 3107-D-1018 Clutch Collar 1
2230-Y-1377 Piston 1 2244-Z- 52 Shift Shaft 1
2208-Q-1005 Gasket - Lock Cover 1 43-X-1006 Pin - Shift Shaft 1
41-X-1368 Screw - Manual Engaging 1 2258-L-714 Spring 1
5-X-521 O-Ring - Manual Engaging Screw 1 3196-S-1137 Tube - Air Cylinder 1
41-X-1742 Plug (Capscrew) - Cylinder Cover 1 5-X-1288 O-Ring - Tube 1
41-X-1669 Screw - Diff Lock Cover 4 2230-N-170 Piston 1
MWA-506 Washer - Diff Lock Cover 4 5X-1153 O-Ring - Piston 1
3266-X-1610 Cover 1 2208-H-944 Gasket 1
5X-1153 O-Ring - Piston 1 3266-F-1020 Cover 1
2244-Z-1274 Push Rod 1 1779-F-344 Shipping Plug 1
3107-U-1321 Clutch Collar 1 MWA-506 Washer 4
KIT 2932 Diff Lock - Forward Rear (Screw-In) MS206045-1 Capscrew 4
KIT 4429 Diff Lock Switch 1 2208-L-1000 O-Ring - Inlet Plug 1

SERVICE KITS
3237-R-1292 Switch 1 MS210016-1 Plug(Capscrew) - Inlet 1
3237-X-1298 Wire Harness 1 41-X-1333 Caging Bolt 1
2803-A-3641 Shim 3 KIT 4429 Diff Lock Switch 1
2258-N-1262 Spring 1 3237-R-1292 Switch 1
3296-C-1381 Shift Fork 1 3237-X-1298 Wire Harness 1
2230-Y-1377 Piston 1 1229-U-1503 Washer 2
41-X-1368 Screw - Manual Engaging 1 KIT 4786 (Bolt-On) Diff Lock Kit - 2.00-39 Spline
5X-1433 O-Ring 1 3296-Z-1300 Shift Fork 1
5X-1153 O-Ring - Piston 1 3107-H-1334 Clutch Collar 1
5X-521 O-Ring 1 2244-Z- 52 Shift Shaft 1
41-X-1742 Capscrew 1 43-X-1006 Pin - Shift Shaft 1
3266-Q-1681 DCDL Shift Cylinder 1 2258-L-714 Spring 1
2244-Z-1274 Push Rod 1 3196-S-1137 Tube - Air Cylinder 1
3107-U-1321 Clutch Collar 1 5-X-1288 O-Ring - Tube 1
2230-N-170 Piston 1
5X-1153 O-Ring - Piston 1
2208-H-944 Gasket 1
3266-F-1020 Cover 1
1779-F-344 Shipping Plug 1
MWA-506 Washer 4
MS206045-1 Capscrew 4
2208-L-1000 O-Ring - Inlet Plug 1
MS210016-1 Plug(Capscrew) - Inlet 1
41-X-1333 Caging Bolt 1
KIT 4429 Diff Lock Switch 1
3237-R-1292 Switch 1
3237-X-1298 Wire Harness 1
1229-U-1503 Washer 2

U.S. 888-725-9355 MeritorPartsOnline.com 34

Canada 800-387-3889
 SERVICE KITS BILL OF MATERIALS
PART NUMBER DESCRIPTION QUANTITY PART NUMBER DESCRIPTION QUANTITY
KIT 4809 Diff Kit - 2.10-41 Spline KIT 4844 Bearing Kit -Hypoid Rear - DCDL
1229-Q-5087 Thrust Washer - Side Gear 2 1228-F-604 Bearing Cup - Pinion - Inner 1
2234-U-1451 Side Gear 2 A1-1228-G-605 Bearing Cone - Pinion - Inner 1
1229-R-1032 Thrust Washer - Diff Pinion 4 1228-L-1728 Bearing Cup - Main Diff LH 1
3278-Y-1117F Spider 1 A-1228-M-1729 Bearing Cone - Main Diff LH 1
2233-X-1116 Pinion Gear 4 1228-U-645 Bearing Cup - Pinion - Outer 1
KIT 4786 (Bolt-On) Diff Lock Kit - 2.00-39 Spline A-1228-N-2068 Bearing Cone - Pinion - Outer 1
3296-Z-1300 Shift Fork 1 1228-F-1982 Bearing Cup - Main Diff RH 1
3107-H-1334 Clutch Collar 1 A-1228-G-1983 Bearing Cone - Main Diff RH 1
2244-Z- 52 Shift Shaft 1 1228-F-552 Spigot Bearing 1
43-X-1006 Pin - Shift Shaft 1 A1-1205-Z-2730 Oil Seal 1
2258-L-714 Spring 1 KIT 576 Snap Rings - Thru Shaft
3196-S-1137 Tube - Air Cylinder 1 1229-P-2590 Snap Ring - .155 1
5-X-1288 O-Ring - Tube 1 1229-Q-2591 Snap Ring - .158 1
2230-N-170 Piston 1 1229-R-2592 Snap Ring - .161 1
5X-1153 O-Ring - Piston 1 1229-S-2593 Snap Ring - .164 1
2208-H-944 Gasket 1 1229-U-2595 Snap Ring - .167 1
3266-F-1020 Cover 1 1229-V-2596 Snap Ring - .170 1
1779-F-344 Shipping Plug 1 1229-W-2597 Snap Ring - .173 1
MWA-506 Washer 4 1229-X-2598 Snap Ring - .176 1
MS206045-1 Capscrew 4 1229-Y-2599 Snap Ring - .179 1
2208-L-1000 O-Ring - Inlet Plug 1 1229-T-2594 Snap Ring - .182 1
MS210016-1 Plug(Capscrew) - Inlet 1
41-X-1333 Caging Bolt 1
KIT 4429 Diff Lock Switch 1
3237-R-1292 Switch 1
3237-X-1298 Wire Harness 1
1229-U-1503 Washer 2
KIT 4809 Diff Kit - 2.10-41 Spline
1229-Q-5087 Thrust Washer - Side Gear 2
2234-U-1451 Side Gear 2
1229-R-1032 Thrust Washer - Diff Pinion 4
3278-Y-1117F Spider 1
2233-X-1116 Pinion Gear 4

35 U.S. 888-725-9355
Canada 800-387-3889
 SERVICE CARRIERS — REMAN
PART TANDEM REAR
NUMBER TANDEM FORWARD AMBOID TANDEM/SINGLE REAR HYPOID
GAWR 20,000 22,000 20,000 17,000 20,000 22,000
Axle Spline 2.10-41 2.10-41 2.10-41 2.00-39 2.10-41 2.10-41

"Less Diff Lock Reman MD2014X MD2214X MR2014X MR1714XH MR2014XH MR2214XH
Less Pump" (Add Ratio)
BOM1 A-3200-K-2221 A-3200-C-2239 A-3200-G-2217 B7-3200-L-1676 B4-3200-L-1676 B68-3200-U-1919
2
Casting 3200-J-2220 3200-F-2216 3200-K-1675

Diff Lock Only Reman MDL2014X MDL2214X MRL1714XH MRL2014XH MRL2214XH

(Add Ratio)
BOM A-3200-N-2224 A-3200-D-2240 A21-3200-A-8269 A20-3200-A-8269 A1-3200-D-2266
Casting 3200-M-2223 3200-Z-8268

Pump Only Reman MP2014X MP2214X 1 For Reference Only - New part number less ratio from
(Add Ratio) axle BOM
BOM A1-3200-K-2221 A1-3200-C-2239 2 For Reference Only - Carrier and cap casting number
Casting 3200-J-2220

SERVICE KITS
SERVICE CARRIERS SOLD AS REMAN ONLY WITH CORE
CHARGE
Diff Lock And Reman MPL2014X MPL2214X
Pump (Add Ratio) Add ratio for service reman part number
BOM A1-3200-N-2224 A1-3200-D-2240 Example: MD2014X 355

Casting 3200-M-2223

TANDEM REAR
TANDEM FORWARD AMBOID TANDEM/SINGLE REAR HYPOID
Available
Ratios 20,000 22,000 20,000 17,000 20,000 22,000
2.47 X X
2.64 X X X X
3.08 X X X X
3.25 X X X X
3.36 X X X X
3.55 X X X X
3.70 X X X X
3.90 X X X X X X
4.11 X X X X X X
4.33 X X X X X
4.63 X X X X X
4.88 X X X X X
5.13 X
5.29 X X X X X
5.57 X
5.86 X X X X X
6.14 X X X
6.43 X X X
6.83 X X X
7.17 X X X
U.S. 888-725-9355 MeritorPartsOnline.com 36
Canada 800-387-3889
• Yoke Installation Tool Instructions (TP10164)
• Tools for Servicing Meritor MT-14X Series Differential Carriers (TP1202)
• Input Adjusting Ring Leak Repair Procedure (TP1214)
 MERITOR AFTERMARKET PARTS WARRANTY

We warrant all new parts for one year from date of shipment to the buyer against defective material or
workmanship (but not against damage caused by accident, abuse or improper installation, maintenance or
repair) when such parts are used on vehicles the specifications of which have been approved by our Engineering
Department.

As the exclusive remedy under this warranty, we will, at our option, repair or replace such parts free of charge, or
take back the nonconforming parts and refund the monies paid by buyer for such parts, if found on examination
by us to be nonconforming and if any necessary return charges are prepaid.

If it is necessary to return any parts under this warranty, buyer agrees not to make any deduction on account
thereof from remittances on current accounts while claims are in the process of disposition. Any expense
incurred without our consent for repairs or replacement will not be allowed.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED
OR STATUToRY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR
PURPOSE. IN NO EVENT SHALL SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE.

Only genuine Meritor replacement parts are covered by this aftermarket parts warranty.
Vehicle models, brands and names depicted herein are the property of their respective owners, and are not in any way associated with Meritor, Inc., or its affiliates.

Meritor Heavy Vehicle Systems, LLC 888-7259-9355 U.S. ©2016 Meritor, Inc.
Litho in USA, PB-1218
7975 Dixie Highway 800-387-3889 Canada
Revised 04-16 (FLOA)
Florence, KY 41024 USA MeritorPartsOnline
meritor.com