Ds G Tap A Series Optical Network Tap
Ds G Tap A Series Optical Network Tap
Ds G Tap A Series Optical Network Tap
GigaTAP A Series
Product Description
The GigaTAP™ A Series is a line of network TAPs designed with the Gigamon
“Always On” architecture. This one-of-a-kind architecture eliminates network link
downtime on network connections through the use of up to four power sources,
including PoE, AC, DC, and on-board battery backup. While using any of the primary
forms of power (PoE, AC, DC), the G-TAP A Series’ unique design constantly charges
G-TAP A-TX FRONT
the integrated backup battery, which allows it to assume power load in the event of a
primary power failure. This eliminates link downtime associated to link renegotiation
on the end devices connected to the TAP.
The G-TAP A Series also provide intelligent management capabilities that monitor link
states of connected devices and the power state of all forms of power. In the event G-TAP A-SF FRONT
that primary power is lost, SNMP traps alert users that the TAP is utilizing the backup
battery. The SNMP traps are re-triggered as battery levels drop to ensure rapid alert
and renewal of the primary power source,eliminating further network downtime. The G-TAP A Series’ intelligent monitoring also offers
an added level of network security to your network by providing SNMP trap alerts when existing links are removed or when new links
are added.
The G-TAP A Series is shipped with its backup battery uninstalled. The backup battery provides a failsafe in case all primary power
sources (AC, DC, or PoE) are unavailable. Primary power sources constantly charge the backup battery so it’s ready to assume the power
load in the event of a power failure on the primary sources.
Table 1: Features
®
ACO ACO
PWR PWR
POWER
SOURCE A POWER
SOURCE B
®
ACO ACO
PWR PWR
FRONT VIEW
SOURCE
A
125VAC/5A 5x20MM FAST
FUSE RATING
SOURCE
A
125VAC/5A 5x20MM FAST
REAR VIEW
FUSE RATING
G-TAP A-SF 1.75in (4.44cm) 5.5in (13.97cm) 9.75in (24.76cm) 3.12lbs (1.41kg)
Type Specification
AC Voltage 100-240V
AC Nominal Current 0.18A@120V
Requirement
AC Frequency 47-63Hz
DC Voltage -36 to -72VDC inputs reverse polarity protected
DC Nominal Current 0.35A@-48V
Requirement
Power over Ethernet Type 1 (802.3af) – CAT3 or higher
(PoE) Type 2 (802.3at) – CAT5 or higher
© 2012-2018 Gigamon. All rights reserved. Gigamon and the Gigamon logo are trademarks of Gigamon in the United States and/or 4010-07 06/18
other countries. Gigamon trademarks can be found at www.gigamon.com/legal-trademarks. All other trademarks are the trademarks
of their respective owners. Gigamon reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
3300 Olcott Street, Santa Clara, CA 95054 USA | +1 (408) 831-4000 | www.gigamon.com