KSP 315

Sludge pump

Output max. 230 m³/h

Output pressure max. 150 bar
Driving power 2 x 800 kW
Machine weight 16,000 kg / 35,275 lb
The KSP 315 from SCHWING KSP 315 Sludge pump

Ready for big tasks

Large quantities of material, wide pumping range, 24h continuous operation: exactly the right task for the KSP
315 from SCHWING. With a maximum of 12 strokes per minute, in continuous operation it pumps up to 230 m³
of material per hour with a low level of wear, and with the well-known reliability of SCHWING sludge pumps.
Ideal conditions in order to carry out demanding tasks such as the backfilling of mines or the pumping of fly
ash from power plants in a safe and smooth manner. The KSP 315 from SCHWING: a guarantee for reliable
maximum power.

Mine backfill (Ocambo, Mexico) Fly ash pumping (Plomin, Croatia)

Maximum reliability Continuous pump flow SSC - SCHWING synchronic control Efficient drive

24/7
SCHWING sludge pumps prove their Due to the asynchronous control of the The innovative SSC system controls and The open hydraulic system of the
reliability all over the world on a daily basis differential cylinders via separate hydraulic regulates the sludge pump in such a way KSP 315 converts the motor
in different industrial sectors. Operating circuits, water hammer in delivery pipeline to ensure a nearly pulsation free conti- power of both powerful electric
periods of over 20 years and annual is avoided. Result: a constant pump flow. nuous operation and therefore low-wear motors of efficiency class IE3 (Pre-
performances of approx. 8,000 hours Advantage: no pulsation dampers are and noise. mium Efficiency) efficiently and with
without major repairs are not unusual. required and wear and noise reduction. a low level of loss in the pumping
Excellent reliability provides a high level of power. High outputs combined with
operational safety. increased efficiency.

Extremely tough Quality made by SCHWING High operating comfort Easier replacement of the pumping piston
With its large XL poppet valves, the robust The main components of the sludge pump Machine data, operating modes, selec- The differential cylinders are longer than the
valve system of the KSP 315 is capable of system, such as the differential cylinders, control ted settings and various parameters pumping cylinders (additional maintenance
pumping materials with a dry solids content block and the complete electric control are de- of the KSP 315 can be called up via stroke). As such, the pumping pistons can be
(TS content) of up to 80 % and a grain size veloped, tested and manufactured by SCHWING. the large colour display. The touch retracted to the water box for servicing and thus
of up to 60 mm. This ensures high power, extraordinary reliability panel which is integrated in the control quickly and safely replaced. Simple solutions for
and fast delivery of spare parts. cabinet allows its operators to change increased efficiency and occupational safety.
pump settings and alerts to the main-
tenance intervals.
 KSP 315 Sludge pump

Technical data
Performance
Output m3/hr 22 - 230
Output pressure max. bar 150
Strokes 1/min. 1.2 - 12.2
Driving power kW 2 x 800
Pump kit
Delivery cylinders Ø mm 360
Stroke length mm 3,100
Delivery cylinder volume dm³/l 315.5
Differential cylinders Ø mm 160/250
Valve system XL poppet valves
Suction valve opening mm 2 x 280 (Ø)
Pressure valve opening mm 2 x 250 (Ø)
Pressure outlet DN 200/250
Grain size max. mm 60
Dimensions
Length mm 11,703
Width mm 1,844
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 2 2
Height 3 3 4 4 5 5 6 6
mm 7 7
2,016
8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16

Machine weight kg / lb 16,000 / 35,275 A A

B B

C
2,016

C C

D D

E
1,844

E E

11,703
F F

SCHWING sludge pumps. The benchmark for reliability. G G

H
10312138.09.2017

SCHWING GmbH Stetter GmbH

Dr.-Karl-Lenz-Strasse 70 · 87700 Memmingen, Germany
H

Heerstrasse 9-27 · 44653 Herne, Germany

H

Fon +49 23 25 - 987-0 · Fax +49 23 25 - 72922 Fon +49 83 31 - 78-0 · Fax +49 83 31 - 78 275
www.schwing-stetter.com · [email protected] www.schwing-stetter.com · [email protected]
I I

Subject to technical and dimensional modifications. Illustrations are non-binding. The exact standard specification, the scope of delivery and the technical data are detailed in the offer.

J J