Smart Street Light System: Design Report

SMART STREET LIGHT Design Report
SYSTEM Kuriakose Mathew

Libin Thomas
Midhun Shaji
PROBLEM STATEMENT
Automatic switching of street lights considering the intensity of
sunlight, brightness control of lights on detecting movement and
error reporting to electric sub sections.
PROJECT SCOPE/OBJECTIVE
Smart street light system tries to find solution for the faster depletion of
energy resources due to the inefficient usage and wastage of these
resources.
Increasing electricity bill is something that can be witnessed by these
practices.
This project help to decrease the wastage of electricity by controlling the
working of street light system that attributes to a good amount of
electricity bills in our nation
This project does not include methods to incorporate usage of renewable
resources like solar energy.
DESIGN AND IMPLEMENTATION
CONSTRAINTS
Constraints are mainly in the module that regulate the brightness of
the light by considering the traffic on the street at a specific time.
Infrared proximity sensors are costly and at the same time maximum
distance to which the sensor can sense is limited to 1 metre, which
may not be sufficient for a 45 metre road.
DEVELOPMENT METHOD
This project include three modules, the sunlight sensing and control
of on\off of the lights, the traffic sensing and brightness control,
error reporting system.
Microcontroller used is arduino uno r3 atmega 328p ,which has to be
programmed for the three tasks. Inputs for the same come from the
three sensors.output include instruction to on\off the control sytems.
SYSTEM OVERVIEW
SYSTEM FEATURES/USE CASES
System for controlling on\off of lights
Use Case Description
Sunlight intensity less than 250 lux
Sunlight intensity grater than 250 lux
Flow of events
If the intensity is less than 250 then switch on the lights
Else switch off the light
Illuminance Example
120,000 lux Brightest sunlight
110,000 lux Bright sunlight
20,000 lux Shade illuminated by entire clear blue sky, midday
1,000 - 2,000 lux Typical overcast day, midday
<200 lux Extreme of darkest storm clouds, midday
400 lux Sunrise or sunset on a clear day (ambient illumination).
40 lux Fully overcast, sunset/sunrise
<1 lux Extreme of darkest storm clouds, sunset/rise

FOR COMPARISON, NIGHTTIME
ILLUMINANCE LEVELS ARE:
Illuminance Example
<1 lux Moonlight[3]
0.25 lux Full Moon on a clear night[4][5]
0.01 lux Quarter Moon
0.002 lux Starlight clear moonless night sky including airglow[4]
0.0002 lux Starlight clear moonless night sky excluding airglow[4]
0.00014 lux Venus at brightest[4]
0.0001 lux Starlight overcast moonless night sky[4]

BRIGHTNESS CONTROL ON
SENSING TRAFFIC
Use Case Description
Movement detected
Flow of events
If there is any movement detected by the infrared proximity sensor

then increase the brightness by controlling voltage from 110v to 220v
Continue this for next 5 minutes then resume the previous state
SYSTEM ARCHITECTURE
INFRARED PROXIMITY SENSOR
An infrared sensor is an electronic instrument that is used to
sense certain characteristics of its surroundings by either emitting
and/or detecting infrared radiation. It is also capable of measuring
heat of an object and detecting motion. Infrared waves are not visible
to the human eye.In the electromagnetic spectrum, infrared radiation
is the region having wavelengths longer than visible light
wavelengths, but shorter than microwaves. The infrared region is
approximately demarcated from 0.75 to 1000µm. Infrared technology
is found in many of our everyday products. For example, a television
has an IR detector for interpreting the signal from the remote control.
Key benefits of infrared sensors include low power requirements,
simple circuitry, and their portable feature.
ARDUINO
Arduino is a single-board microcontroller, intended to make the
application of interactive objects or environments more accessible.
The hardware consists of an open- source hardware board designed
around an 8-bit Atmel AVR microcontroller, or a 32-bit Atmel ARM.
Current models feature a USB interface, 6 analog input pins, as well
as 14 digital I/O pins which allows the user to attach various
extension boards. The Arduino board exposes most of the
microcontroller's I/O pins for use by other circuits. The Diecimila,
Duemilanove, and current Uno provide 14 digital I/O pins, six of
which can produce pulsewidth modulated signals, and six analog
inputs.
DETAILED SYSTEM DESIGN
DETAILED SYSTEM DESIGN
LDR MODULE (up) INFRARED SENSOR

LDR
For sullight sensing
module(facing
F
lamp)
MICROCONTROLLER
GPS MODULE
LAMP
TO CONTROL SYSTEM
RISKS AND CHALLENGES
•The implementation of an error reporting system to the electricity
subsection is a difficult task.
•The switching of the lighting system between a minimum and
maximum mode is difficult.
GLOSSARY
Renewable Resources
Infrared proximity sensor
BIBILIOGRAPHY
https://www.arduino.cc/en/Guide/HomePage
http://www.engineersgarage.com/articles/embedded-systems
https://en.wikipedia.org/wiki/Arduino
THANK YOU

Smart Street Light System: Design Report

Uploaded by

Copyright:

Available Formats

Smart Street Light System: Design Report

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Smart Street Light System: Design Report

Uploaded by

Copyright:

Available Formats

SMART STREET LIGHT Design Report

SYSTEM Kuriakose Mathew

120,000 lux Brightest sunlight

110,000 lux Bright sunlight

20,000 lux Shade illuminated by entire clear blue sky, midday

1,000 - 2,000 lux Typical overcast day, midday

<200 lux Extreme of darkest storm clouds, midday

400 lux Sunrise or sunset on a clear day (ambient illumination).

40 lux Fully overcast, sunset/sunrise

<1 lux Extreme of darkest storm clouds, sunset/rise

<1 lux Moonlight[3]

0.25 lux Full Moon on a clear night[4][5]

0.01 lux Quarter Moon

0.002 lux Starlight clear moonless night sky including airglow[4]

0.0002 lux Starlight clear moonless night sky excluding airglow[4]

0.00014 lux Venus at brightest[4]

0.0001 lux Starlight overcast moonless night sky[4]

If there is any movement detected by the infrared proximity sensor

LDR MODULE (up) INFRARED SENSOR

You might also like