

   



I. Multiple Choice Questions (Type-I)
1. The element which exists in liquid state for a wide range of temperature and
can be used for measuring high temperature is
(i) B
(ii) Al
(iii) Ga
(iv) In

2. Which of the following is a Lewis acid ?

(i) AlCl3
(ii) MgCl2
(iii) CaCl2
(iv) BaCl2

3. The geometry of a complex species can be understood from the knowledge of

type of hybridisation of orbitals of central atom. The hybridisation of orbitals
–
of central atom in [Be(OH)4] and the geometry of the complex are respectively
(i) sp3 , tetrahedral
(ii) sp3 , square planar
(iii) sp 3 d 2 , octahedral
(iv) dsp2 , square planar

4. Which of the following oxides is acidic in nature?

(i) B2O3
(ii) Al2O3
(iii) Ga2O3
(iv) In2O3

16-04-2018
5. The exhibition of highest co-ordination number depends on the availability of
vacant orbitals in the central atom. Which of the following elements is not likely
3–
to act as central atom in MF6 ?
(i) B
(ii) Al
(iii) Ga
(iv) In

6. Boric acid is an acid because its molecule

(i) contains replaceable H+ ion
(ii) gives up a proton
–
(iii) accepts OH from water releasing proton
(iv) combines with proton from water molecule

7. Catenation i.e., linking of similar atoms depends on size and electronic

configuration of atoms. The tendency of catenation in Group 14 elements
follows the order:
(i) C > Si > Ge > Sn
(ii) C >> Si > Ge ≈ Sn
(iii) Si > C > Sn > Ge
(iv) Ge > Sn > Si > C

8. Silicon has a strong tendency to form polymers like silicones. The chain length
of silicone polymer can be controlled by adding
(i) MeSiCl3
(ii) Me2SiCl2
(iii) Me3SiCl
(iv) Me4Si

9. Ionisation enthalpy (∆i H1 kJ mol–1) for the elements of Group 13 follows the order.
(i) B > Al > Ga > In > Tl
(ii) B < Al < Ga < In < Tl
(iii) B < Al > Ga < In > Tl
(iv) B > Al < Ga > In < Tl

10. In the structure of diborane

(i) All hydrogen atoms lie in one plane and boron atoms lie in a plane
perpendicular to this plane.
(ii) 2 boron atoms and 4 terminal hydrogen atoms lie in the same plane
and 2 bridging hydrogen atoms lie in the perpendicular plane.
(iii) 4 bridging hydrogen atoms and boron atoms lie in one plane and two
terminal hydrogen atoms lie in a plane perpendicular to this plane.
(iv) All the atoms are in the same plane.
135 The p-Block Elements

16-04-2018
 11. A compound X, of boron reacts with NH3 on heating to give another compound
Y which is called inorganic benzene. The compound X can be prepared by
treating BF3 with Lithium aluminium hydride. The compounds X and Y are
represented by the formulas.
(i) B2H6 , B3N3H6
(ii) B2O3, B3 N3 H6
(iii) BF3, B3N3 H6
(iv) B3N3H6 , B2H6

12. Quartz is extensively used as a piezoelectric material, it contains ___________.

(i) Pb
(ii) Si
(iii) Ti
(iv) Sn

13. The most commonly used reducing agent is

(i) AlCl3
(ii) PbCl2
(iii) SnCl4
(iv) SnCl2

14. Dry ice is

(i) Solid NH3
(ii) Solid SO2
(iii) Solid CO2
(iv) Solid N2

15. Cement, the important building material is a mixture of oxides of several

elements. Besides calcium, iron and sulphur, oxides of elements of which of
the group (s) are present in the mixture?
(i) group 2
(ii) groups 2, 13 and 14
(iii) groups 2 and 13
(iv) groups 2 and 14

II. Multiple Choice Questions (Type-II)

In the following questions two or more options may be correct.

16. The reason for small radius of Ga compared to Al is _______.

(i) poor screening effect of d and f orbitals
(ii) increase in nuclear charge
Exemplar Problems, Chemistry 136

16-04-2018
 (iii) presence of higher orbitals
(iv) higher atomic number

17. The linear shape of CO2 is due to _________.

(i) sp3 hybridisation of carbon
(ii) sp hybridisation of carbon
(iii) pπ – pπ bonding between carbon and oxygen
(iv) sp2 hybridisation of carbon

18. Me3SiCl is used during polymerisation of organo silicones because

(i) the chain length of organo silicone polymers can be controlled by adding
Me3SiCl
(ii) Me3SiCl blocks the end terminal of silicone polymer
(iii) Me3SiCl improves the quality and yield of the polymer
(iv) Me3SiCl acts as a catalyst during polymerisation

19. Which of the following statements are correct?

(i) Fullerenes have dangling bonds
(ii) Fullerenes are cage-like molecules
(iii) Graphite is thermodynamically most stable allotrope of carbon
(iv) Graphite is slippery and hard and therefore used as a dry lubricant in
machines

20. Which of the following statements are correct. Answer on the basis of Fig.11.1.
(i) The two birdged hydrogen
atoms and the two boron atoms
lie in one plane;
(ii) Out of six B–H bonds two
bonds can be described in
terms of 3 centre 2-electron
bonds.
(iii) Out of six B-H bonds four B-H
bonds can be described in
terms of 3 centre 2 electron
bonds; Fig. 11.1

(iv) The four terminal B-H bonds

are two centre-two electron regular bonds.

21. Identify the correct resonance structures of carbon dioxide from the ones given
below :
(i) O – C≡O
(ii) O=C=O
– +
(iii) O ≡ C–O
– +
(iv) O – C≡O

137 The p-Block Elements

16-04-2018
 III. Short Answer Type
22. Draw the structures of BCl3.NH3 and AlCl3 (dimer).
23. Explain the nature of boric acid as a Lewis acid in water.
24. Draw the structure of boric acid showing hydrogen bonding. Which species
is present in water? What is the hybridisation of boron in this species?
25. Explain why the following compounds behave as Lewis acids?
(i) BCl3 (ii) AlCl3
26. Give reasons for the following:
(i) CCl4 is immiscible in water, whereas SiCl4 is easily hydrolysed.
(ii) Carbon has a strong tendency for catenation compared to silicon.

27. Explain the following :

(i) CO2 is a gas whereas SiO2 is a solid.
(ii) Silicon forms SiF62– ion whereas corresponding fluoro compound of
carbon is not known.

28. The +1 oxidation state in group 13 and +2 oxidation state in group 14 becomes
more and more stable with increasing atomic number. Explain.
29. Carbon and silicon both belong to the group 14, but inspite of the
stoichiometric similarity, the dioxides, (i.e., carbon dioxide and silicon dioxide),
differ in their structures. Comment.
30. If a trivalent atom replaces a few silicon atoms in three dimensional network
of silicon dioxide, what would be the type of charge on overall structure?
–
31. When BCl3 is treated with water, it hydrolyses and forms [B[OH]4] only whereas
3+
AlCl3 in acidified aqueous solution forms [Al (H2O)6] ion. Explain what is the
hybridisation of boron and aluminium in these species?
32. Aluminium dissolves in mineral acids and aqueous alkalies and thus shows
amphoteric character. A piece of aluminium foil is treated with dilute
hydrochloric acid or dilute sodium hydroxide solution in a test tube and on
bringing a burning matchstick near the mouth of the test tube, a pop sound
indicates the evolution of hydrogen gas. The same activity when performed
with concentrated nitric acid, reaction doesn’t proceed. Explain the reason.
33. Explain the following :
(i) Gallium has higher ionisation enthalpy than aluminium.
3+
(ii) Boron does not exist as B ion.
3– 3–
(iii) Aluminium forms [AlF6] ion but boron does not form [BF6] ion.
(iv) PbX2 is more stable than PbX4.
4+ 2+
(v) Pb acts as an oxidising agent but Sn acts as a reducing agent.
(vi) Electron gain enthalpy of chlorine is more negative as compared to fluorine.
(vii) Tl (NO3)3 acts as an oxidising agent.
Exemplar Problems, Chemistry 138

16-04-2018
 (viii) Carbon shows catenation property but lead does not.
(ix) BF3 does not hydrolyse.
(x) Why does the element silicon, not form a graphite like structure whereas
carbon does.

34. Identify the compounds A, X and Z in the following reactions :

(i) A + 2HCl + 5H2O → 2NaCl + X

∆ ∆
X 
370K
→ HBO2 
> 370K
→Z

35. Complete the following chemical equations :

Z + 3 LiAlH4 → X + 3 LiF + 3AlF3
X + 6H2O → Y + 6H2
∆
3X + 3O2 → B2O3 + 3H2O

IV. Matching Type

In the following questions more than one correlation is possible between
options of Column I and Column II. Make as many correlations as you can.

36. Match the species given in Column I with the properties mentioned in
Column II.

Column I Column II
–
(i) BF 4
(a) Oxidation state of central atom is +4
(ii) AlCl3 (b) Strong oxidising agent
(iii) SnO (c) Lewis acid
(iv) PbO2 (d) Can be further oxidised
(e) Tetrahedral shape

37. Match the species given in Column I with properties given in Column II.

Column I Column II
(i) Diborane (a) Used as a flux for soldering metals
(ii) Galluim (b) Crystalline form of silica
(iii) Borax (c) Banana bonds
(iv) Aluminosilicate (d) Low melting, high boiling, useful for
measuring high temperatures
(v) Quartz (e) Used as catalyst in petrochemical
industries
139 The p-Block Elements

16-04-2018
 38. Match the species given in Column I with the hybridisation given in Column II.

Column I Column II
(i) Boron in [B(OH)4]– (a) sp2
(ii) Aluminium in [Al(H2O)6]3+ (b) sp3
(iii) Boron in B2H6 (c) sp3d2
(iv) Carbon in Buckminsterfullerene
4–
(v) Silicon in SiO4
2–
(vi) Germanium in [GeCl6]

V. Assertion and Reason Type

In the following questions a statement of Assertion (A) followed by a statement
of Reason (R) is given. Choose the correct option out of the choices given
below each question.
39. Assertion (A): If aluminium atoms replace a few silicon atoms in three
dimensional network of silicon dioxide, the overall structure
acquires a negative charge.
Reason (R) : Aluminium is trivalent while silicon is tetravalent.
(i) Both A and R are correct and R is the correct explanation of A.
(ii) Both A and R are correct but R is not the correct explanation of A.
(iii) Both A and R are not correct
(iv) A is not correct but R is correct.
40. Assertion (A): Silicons are water repelling in nature.
Reason (R) : Silicons are organosilicon polymers, which have (–R2SiO–) as
repeating unit.
(i) A and R both are correct and R is the correct explanation of A.
(ii) Both A and R are correct but R is not the correct explanation of A.
(iii) A and R both are not true.
(iv) A is not true but R is true.

VI. Long Answer Type

41. Describe the general trends in the following properties of the elements in
Groups 13 and 14.
(i) Atomic size (ii) Ionisation enthalpy
(iii) Metallic character (iv) Oxidation states
(v) Nature of halides

Exemplar Problems, Chemistry 140

16-04-2018
42. Account for the following observations:
(i) AlCl3 is a Lewis acid
(ii) Though fluorine is more electronegative than chlorine yet BF3 is a weaker
Lewis acid than BCl3
(iii) PbO2 is a stronger oxidising agent than SnO2
(iv) The +1 oxidation state of thallium is more stable than its +3 state.

43. When aqueous solution of borax is acidified with hydrochloric acid, a white
crystalline solid is formed which is soapy to touch. Is this solid acidic or basic
in nature? Explain.

44. Three pairs of compounds are given below. Identify that compound in each of
the pairs which has group 13 element in more stable oxidation state. Give
reason for your choice. State the nature of bonding also.
(i) TlCl3, TlCl
(ii) AlCl3 , AlCl
(iii) InCl3, InCl

45. BCl3 exists as monomer whereas AlCl3 is dimerised through halogen bridging.
Give reason. Explain the structure of the dimer of AlCl3 also.
46. Boron fluoride exists as BF3 but boron hydride doesn’t exist as BH3. Give
reason. In which form does it exist? Explain its structure.
47. (i) What are silicones? State the uses of silicones.
(ii) What are boranes? Give chemical equation for the preparation of diborane.
48. A compound (A) of boron reacts with NMe3 to give an adduct (B) which on
hydrolysis gives a compound (C) and hydrogen gas. Compound (C) is an acid.
Identify the compounds A, B and C. Give the reactions involved.
49. A nonmetallic element of group 13, used in making bullet proof vests is
extremely hard solid of black colour. It can exist in many allotropic forms and
has unusually high melting point. Its trifluoride acts as Lewis acid towards
ammonia. The element exihibits maximum covalency of four. Identify the
element and write the reaction of its trifluoride with ammonia. Explain why
does the trifluoride act as a Lewis acid.
50. A tetravalent element forms monoxide and dioxide with oxygen. When air is
passed over heated element (1273 K), producer gas is obtained. Monoxide of
the element is a powerful reducing agent and reduces ferric oxide to iron.
Identify the element and write formulas of its monoxide and dioxide. Write
chemical equations for the formation of producer gas and reduction of ferric
oxide with the monoxide.

141 The p-Block Elements

16-04-2018
 ANSWERS
I. Multiple Choice Questions (Type-I)

1. (iii) 2. (i) 3. (i) 4. (i) 5. (i) 6. (iii)

7. (ii) 8. (iii) 9. (iv) 10. (ii) 11. (i) 12. (ii)
13. (iv) 14. (iii) 15. (ii)

II. Multiple Choice Questions (Type-II)

16. (i), (ii) 17. (ii), (iii) 18. (i), (ii)

19. (ii), (iii) 20. (i), (ii), (iv) 21. (ii), (iv)

III. Short Answer Type

23. Boric acid acts as Lewis acid in water by accepting a pair of electrons
from a hydroxyl ion :
– +
B (OH)3 + 2HOH → [B(OH)4] + H3O
–
24. Species present in water is [B(OH) 4] . Boron is sp3 hybridised.

25. BCl3 and AlCl3 being electron deficient due to incomplete octet of central
metal atom behave as Lewis acids.

26. CCl4 is a covalent compound. Hence, insoluble in water whereas SiCl4 is

soluble because Si atom in SiCl4 can accomodate the lone pair of electrons
obtained from oxygen atom of water molecule in d-orbitals.

27. (i) Very high Si-O bond enthalpy and ionic character of Si-O bond.
(ii) Vacant 3d orbitals are available on Si atom to accomodate electrons
and expand coordination number upto 6.
29. [Hint : In CO2 , carbon is sp hybridised and it is a linear molecule. In
SiO2, Si is tetrahedrally bonded to four oxygen atoms.]
30. Negative

32. [Hint : Conc. HNO3 renders aluminium passive by forming a protective

oxide layer on the surface.]

34. A : Na2B4O7 (Borax) 35. A : BF3

X : H3BO3 X : B2H6
Z : B2O3 Y ; H3BO3

Exemplar Problems, Chemistry 142

16-04-2018
IV. Matching Type

36. (i) → (e) (ii) → (c) (iii) → (d) (iv) → (a), (b)
37. (i)→ (c) (ii)→ (d) (iii)→(a) (iv)→(e) (v)→(b)
38. (i)→ (b), (ii) → (c), (iii) → (b), (iv) → (a) (v)→(b)
(vi)→(c)

V. Assertion and Reason Type

39. (i) 40. (ii)

VI. Long Answer Type

45. [Hint : Absence of d-orbitals in boron.]

48. A = B2H6, B = BH3.NMe3, C = B(OH)3 i.e. H3BO3.

143 The p-Block Elements

16-04-2018