22-36" Pipe Bending Machine (HPB22-36) Technical Specifications and Features

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

www.darbyequip.

com
22-36" Pipe Bending Machine (HPB22-36)
TECHNICAL SPECIFICATIONS AND FEATURES

Length 24'6" (7467.6mm)


Width 9'1" (2768.6mm)
Height 9'3" (2819.4mm)
51,000lbs (23,133kg)
Weight
(w/o bending set)
Engine CAT C6.6 Turbo Diesel 174hp @ 2200rpm
Winch Ramsey 20,000lb Powermaster® Winch
Air Compressor Quincy 390 Compressor w/ Hydraulic Drive
Cylinders (4) 9" (229mm)Outboard Cylinders w/ 19" Stroke
(4) 7" (178mm) Inboard Cylinders w/ 6" Stroke
Denison Main Pump, Parker Piston Pump for
Hydraulic Pump
Compressor Drive
Oil Cooler American Industrial

Features / Advantages
 35gal (133 Litre) fuel tank
 5 section hydraulic control valve for optional hydraulic mandrel operation as well as bending
operations
 120gal (454 Litre) hydraulic tank, 100gal (379 Litre) fill capacity – Keeps hydraullic oil cooler to extend
the life of the bending machine
 Oil cooler in compressor drive circuit keeps the circuit cool and also cools the oil while the compressor
is not running. This extends the life of the hydraulic system
 Machine side plates reinforced with stiffeners in key locations; Multi-pass welding for optimal frame
life and strength; Side plates made from 1" T1 steel; Die nest plates made from 1 1/2 " T-1 steel; all
welds are pre heated and heat controlled and all welds are made 'in position'
 Duel hydraulic filtration, pressure and return
 Murphy Control panel w/ electric start, throttle control, oil pressure, tachometer and hour meter
 Parker Seal-Lok™ hydraulic systems prevents leaks and has a working pressure rating of 3000psi
 Repairable hydraulic cylinders with Parker Seals come apart without cutting to enable easy seal repair
 15 ton CAT style 20” wide triple grouser tracks with 24” idlers for easier towing on the Right of Way

Performance
 Maximum bending force at front of stiffback 763,000lbs
 Air compressor with 250psi maximum continuous pressure
 Hydraulic vane pump for main bending circuit, 74gpm @2200 rpm, 3000psi

2940 North Toledo Avenue ∙ Tulsa, OK 74115 ∙ 918.582.2340 ∙ Fax 918.582.2001 ∙ sales@darbyequip.com

You might also like