Scribd
Upload
2K views4 pages

Edison Robot Barcodes

The document contains lists of barcode programs and codes for different functions of an Edison robot, including pre-set driving programs, remote control commands, and calibration instructions. Specifically, it provides barcodes for line tracking, light following, bouncing in borders, sumo wrestling, and driving forwards, backwards, spinning left/right, and turning left/right. It also lists TV/DVD remote control codes and barcodes for calibrating driving and obstacle detection sensitivity.

Uploaded by

ethan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views4 pages

Edison Robot Barcodes

The document contains lists of barcode programs and codes for different functions of an Edison robot, including pre-set driving programs, remote control commands, and calibration instructions. Specifically, it provides barcodes for line tracking, light following, bouncing in borders, sumo wrestling, and driving forwards, backwards, spinning left/right, and turning left/right. It also lists TV/DVD remote control codes and barcodes for calibrating driving and obstacle detection sensitivity.

Uploaded by

ethan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Barcodes list

Pre-set barcode programs for Edison

Clap controlled driving Line tracking

Avoid obstacles Light following (follow a torch/flashlight)

Bounce in borders Sumo wrestle


Barcodes list
Remote control driving with Edison

Drive forwards Drive backwards

Spin left Spin right

Turn left Turn right

Play beep Play tune


Barcodes list
Remote control driving with Edison – programmable commands

TV/DVD remote control code # 0 TV/DVD remote control code # 1

TV/DVD remote control code # 2 TV/DVD remote control code # 3

TV/DVD remote control code # 4 TV/DVD remote control code # 5

TV/DVD remote control code # 6 TV/DVD remote control code # 7


Barcodes list
Calibration barcodes

Drive calibration instructions


1. Scan the barcode with a V2.0 Edison.
2. Press the play button twice.

Drive calibration – V2.0 robots only

Calibrate obstacle detection

Obstacle detection calibration instructions


Set maximum sensitivity:
1. Scan the barcode with Edison. Remove any obstacles in front of Edison.
2. Press the play button to enter calibration mode. The left sensitivity is calibrated first.
3. Repeatedly press the play button (this increases sensitivity) until the left red LED is
flickering.
4. Repeatedly press the record (round) button (this decreases sensitivity) until the LED
completely stops flickering.
5. Press the stop (square) button to switch to calibrate the right side.
6. Repeatedly press the play button until the right red LED is flickering. Now repeatedly
press the record button until the LED completely stops flickering.
7. Press the stop button and the calibration is complete.

Set custom sensitivity:


You can set the distance that obstacles are detected by placing an obstacle in front of
Edison and repeating above steps 1 through 7.

You might also like