7

We 00 lb
igh . P
QT-711-EV t C atie
ap nt
ac
ity
Elevating Radiographic Mobile Float-Top Table
- A Digital Imaging Solution...

QT-7711-EEV ELEVATING MOBILE FLOAT-TTOP TABLE

Quantum’s QT-711-EV Elevating Mobile Float-Top Radiographic The QT-711-EV table allows patients to be imaged from
table incorporates a revolutionary design by combining the head-to-toe, without requiring the technologist to move the
flexibility of a mobile radiographic table with a floating top patient in most situations. This feature improves patient
capability and elevating features for ease of use. This unique throughput and operator efficiency.
ability makes the QT-711-EV Table an excellent choice for
simplicity in positioning patients for exams, including The completely flat table-top design is low maintenance and
recumbent and cross table exams. The elevation travel range easy to clean. Made of a robust low absorption radiolucent
of the QT-711-EV is from 22.50" to 33.75" (57 - 86 cm), with material, the table-top very durable, and can accommodate
motion speed of less than one (1) inch/per second of travel, patient weights of up to 700 lbs. (318 kg). Adjustable
for quick patient positioning. operator/patient handgrips are included and can be positioned
along both sides of the table's concealed accessory rails.
The QT-711-EV also provides visual indication (LED type) of These grips can be used by the operator for table movement
the battery power storage. When fully charged, the table can or to assist the patient during transfer or re-positioning.
provide over 100 elevation cycles, with a typical patient
(approximately 180-250 lbs), which is about 2-3 days of use The table also includes a "QUAD-Locking Wheel" feature,
within a busy radiology department. After 2-1/2 minutes of which allows the technologist to lock all four wheels with
non use, the elevation feature goes into a "sleep" mode to one convenient foot control. In the opposite position the fast
conserve battery charge power. To activate, simply depress pedal locks into a "Steering" mode, this locks the wheel at the
the foot switch and the unit will "wake up" and return to foot end of the table, to allow easy table movement and
normal operation. The system also provides a visual light control.
indicator, letting the user know when it needs to be charged. The QT-711-EV's revolutionary design combines the flexibility
Charging is quick & easy by plugging the retractable cord into of a mobile radiographic table with floating-top capability and
the unit. table elevation functionality to produce an excellent solution
The table also allows the user to set a "Preset" table height to for Direct Digital (DR) systems. The unique features of the
quickly accommodate fast positioning to a routine working QT-711-EV provides the technologist with superior positioning
height.The QT-711-EV's floating table-top is 85" in length and capabilities for faster throughput and comfort, and is designed
provides 15" (+/- 7 1/2") of longitudinal travel, while the table- to accommodate the largest patient (up to 700 lbs).
top width is 27 1/2" and provides 5" (+/- 2 1/2") of transverse
travel. A hand-controlled table-side locking lever makes adjust-
ments easy and convenient.

Innovations in Imaging.
 7
We 00 lb
igh . P
QT-711-EV Specifications t C atie
ap nt
ac
ity
QT-7711-EEV ELEVATING MOBILE FLOAT-TTOP RADIOGRAPHIC TABLE:

• Patient Weight capacity: 700 lbs. (318.2 kg) “Floating - Top”Table Design with Low
• Elevating (Motorized) Travel Range of 22.5" - 33.75" (57 - 86 cm)
absorption table material
• Collision sensing electronics of elevating motion for safety,
with auto stop control Adjustable patient handgrips
• Laser sensors below table for sensing digital image receptor, (set of 2) included Accessory Rails
with automatic stopping Safety corner
• Programmable "Preset" table height position, with indicator on bumpers
foot control
• Foot controlled switch for elevating function, with digital "LED"
type indicators of power level charge (switch is mounted to the
table structure and moves freely with table positioning)
• Unit designed to operate without need for incoming power line
(battery storage unit) ("GEL CELL" long-lasting battery type; Emergency Hand locking device
with no maintenance required) switch for floating top control
• Table Length 85" (216 cm)
• Table Longitudinal Travel +/- 7.5" (15" Total / 38 cm)
• Table Width 27.75" (70.5 cm)
• Table Transverse Travel +/- 2.5" (5" Total / 12.7 cm)
• Includes one set (2) Patient Grips
• Accessory rails (both sides)
• Table-top Markings: two lines along table length, to indicate Table wheels Operator foot switch for
actual image area foot control elevating control
• Hand locking device for control of floating table-top
(control mounted on left side)
• Includes Table corner bumpers
• "QUAD" Locking wheel system, with LEFT side single foot
control lever, which locks ALL four wheels
• Includes "Steering" wheel feature: right front wheel
locks at 0° or 90°, when table is moved,
in Steer mode
• Includes battery charger unit (wall or shelf
mounted), with retractable power cord
(25' length type) for recharging
- Power input: 115 VAC / single phase / 10 Amp
(Int'l: 220 VAC / single phase)

OPTIONAL ITEMS FOR

QT-7711-EEV TABLE:
QT-MOD: Table top length
may be specially modified
(consult factory)
R90-CB: Patient Compression Device

QT-TPAD: Table-top Pad: Nylon table pad

(85” x 22” in length, 11/42”
Specifications subject to change without prior notice. © 2004 Quantum Medical Imaging, LLC
thick, color: Black) p/n: QMI-EMFTT (09/04)

TM

Innovations in Imaging.
Quantum Medical Imaging, LLC
2905 Veterans Memorial Highway • Ronkonkoma, NY 11779 USA • Tel: (631) 567-5800 • Fax: (631) 567-5074
E-mail: [email protected] • Website: www.quantummedical.net