ABT Configuration
ABT Configuration
ABT Configuration
(4G0)
AUDI A6 LIMOUSINE (4G0)
Your products
Description Order no.
ABT POWER consisting of: ABT-ECU (AEC), bracket set, cable harness and mounting kit
In this technology, the ABT Power Software is used in an additional engine control unit, the ABT Engine Control (AEC). Thus, ABT ensures the high standard in
performance increase also in new developments and increasing high-tech in vehicles.
Your advantage: The serial engine control unit remains untouched and the vehicle is completely diagnosable. And when it comes to the quality of AEC, the high
standards of the VW Group apply.
4G0120205CGLC/1
Attention:
- on vehicles with an S-Line Exterior package the serial front spoiler must be mounted before assembling the Abt front spoiler.
additional information:
- the glue which is needed for the assembly is not included in the delivery. Please only use the adhesives mentioned in the test documents (general operating
license, approval). Disregard leads to the loss of the general operating license and insurance protection of the vehicle as well as prosecution in case of damage.
The approved adhesives can be bought at Volkswagen/ Audi with article number 000.071.785 D as a complete adhesive set (glue incl. primer). Two adhesive
sets are needed for the assembly. The primer which is included in the adhesive set is not needed for the assembly. 4G0801110
Attention:
- on vehicles with an S-Line Exterior package the serial side skirts must be mounted before assembling the Abt side skirts
additional information:
- the glue which is needed for the assembly is not included in the delivery. Please only use the adhesives mentioned in the test documents (general operating
license, approval). Disregard leads to the loss of the general operating license and insurance protection of the vehicle as well as prosecution in case of damage.
The approved adhesives can be bought at Volkswagen/ Audi with article number 000.071.785 D as a complete adhesive set (glue incl. primer). Three adhesive
sets are needed for the assembly. The primer which is included in the adhesive set is not needed for the assembly. 4G0801120
additional information:
- the glue which is needed for the assembly is not included in the delivery. Please only use the adhesives mentioned in the test documents (general operating
license, approval). Disregard leads to the loss of the general operating license and insurance protection of the vehicle as well as prosecution in case of damage.
The approved adhesives can be bought at Volkswagen/ Audi with article number 000.071.785 D as a complete adhesive set (glue incl. primer). One adhesive set
is needed for the assembly.
8T0800105
ABT - MIRROR CAPS The standard version of the ABT mirror caps is carbonfiber clear coated
CARBON GLOSS
Following further options are possible:
carbon matt (optional with extra charge);
carbon with colored coating (optional with extra charge);
4G0808220
ABT - FR20 - SPORT ALLOY Conceived for motorsport, built for the roads.
WHEEL SET Elegant and refined down to the smallest detail. But also powerful and striking. Mystic black meets gleaming silver. The FR is the latest iteration of ABT
Sportsline’s classic five-spoke design. Made from high-quality materials. Produced with devotion. A statement of intent.
Lowering:
Audi A4, S4, A5, S5, RS5
FA: 15 - 40mm
RA: 15 - 40mm
Audi A6
FA: 35 - 55mm
RA: 35 - 55mm
Higher cost for the installation of the ABT-suspension products may arise due to additional set up cost for electronical equipment (like automatic cruise control
(ACC), active lane assist, active side assist and others). This cost are not included yet in the installation cost. The instructions of the manufacturer have to be
obeyed. 8T2505250
YOUR ABT CODEOn your next visit, provide this code on our home page to re-load your configuration. ABT-4577-LLLL-3B
Or give your personal configuration code to your next ABT dealer: