Hall Ticket Number :

R-15
Code: 5G356
III B.Tech. I Semester Regular & Supplementary Examinations November 2018
Microprocessors and Interfacing
( Common to CSE & IT )
Max. Marks: 70 Time: 3 Hours
Answer all five units by choosing one question from each unit ( 5 x 14 = 70 Marks )
*********
UNIT–I
1. a) Discuss the features of 8086 7M
b) Explain how the pipelining is implemented in 8086 7M
OR
2. a) List different instruction groups and mention two examples in each 7M
b) Develop 8086 alp to find the smallest word in a array of 100 words 7M
UNIT–II
3. a) Differentiate SRAM and DRAM 4M
b) Interface two 8Kb ROM and four 16Kb RAM memories to 8086 10M
OR
4. a) Justify latches and buffers used for interfacing 4M
b) Explain the architecture with different modes of 8255 10M
UNIT–III
5. a) How the DMA is faster than others. 4M
b) Sketch and explain how to Interface 8257 with 8086 10M
OR
6. a) Arrange the sequence of actions in 8086 when interrupt occurs. 4M
b) Develop the structure of cascading interrupt connection using 8259 10M
UNIT–IV
7. a) Give the importance of communication interface 4M
b) Explain the architecture of 8251 with neat sketch 10M
OR
8. a) Give the structure how to connect the devices using RS232 4M
b) Summarize the each pin function of RS232 10M
UNIT–V
9. a) Differentiate segmentation and paging 7M
b) Explain the salient features of 80386 7M
OR
10. a) Discuss Salient features of Pentium processors 7M
b) Explain the architectural features of Pentium pro processors 7M
***

Page 1 of 1
Hall Ticket Number :
R-15
Code: 5G153
III B.Tech. I Semester Regular & Supplementary Examinations November 2018
Operating Systems
( Computer Science and Engineering )
Max. Marks: 70 Time: 3 Hours
Answer all five units by choosing one question from each unit ( 5 x 14 = 70 Marks )
*********
UNIT–I
1. a) Explain inter process communication models along with its strengths and
weaknesses. 7M
b) Define a process and explain various operations on processes. 7M
OR
2. a) Let the five given processes whose arrival time is zero as per the given order and
length of the CPU burst time in milliseconds.
Process Burst Time
P1 12
P2 10
P3 8
P4 4
P5 11
Calculate the average waiting time of nonpreemptive SJF scheduling algorithm. 7M
b) What are the major activities of an Operating System related to file management? 7M
UNIT–II
3. a) Compare Single-threaded and Multi-threaded processes. Write the benefits of
multi-threaded programming. 7M
b) Explain Critical Section problem. 7M
OR
4. a) Write Short notes on a) Processor Affinity ii) Load Balancing 8M
b) Define a signal and explain signal handling. 6M
UNIT–III
5. a) Explain Resource-Allocation Graph. 7M
b) Explain any two page replacement algorithms. 7M
OR
6. a) Consider the following snapshot of the system.
Allocation Max Available
A B C D A B C D A B C D
P0 1 2 1 2 1 1 1 2 2 5 2 1
P1 1 1 0 0 1 8 5 0
P2 2 4 5 4 3 4 5 6
P3 1 6 4 2 1 6 6 2
P4 0 1 1 3 0 7 5 5
Answers the following questions using the Bankers algorithm.
i) Is the system in a safe state? If it is, find the sequence that satisfies safety
requirement.
ii) If a request from a process P1 arrives (0 3 1 0) can the request be granted
immediately? Give detail explanation. 8M
b) Explain the importance of contiguous memory allocation. 6M
UNIT–IV
7. a) Explain file access methods. 7M
b) Explain disk structure. 7M
OR
8. a) Explain swap-space management. 6M
b) Explain disk scheduling. 8M
UNIT–V
9. a) Define Access Matrix and explain its implementation. 7M
b) Explain Kernel I/O subsystem. 7M
OR
10. a) Explain the classification of security attacks. 7M
b) Explain capability based systems. 7M
****
Page 1 of 1
Hall Ticket Number :
R-15
Code: 5G154
III B.Tech. I Semester Regular & Supplementary Examinations November 2018
Software Engineering
( Computer Science Engineering )
Max. Marks: 70 Time: 3 Hours
Answer all five units by choosing one question from each unit ( 5 x 14 = 70 Marks )
*********
UNIT–I
1. a) What is software process frame work? Explain in detail. 7M
b) State and explain software practitioners myths and reality. 7M
OR
2. a) Explain the incremental software process model in detail. 7M
b) What are the core principles of software engineering practice ? 7M
UNIT–II
3. a) Explain in detail about requirements specification. 7M
b) What is scenario based modeling? Describe the steps of scenario based
modeling with a suitable example. 7M
OR
4. Write about following Requirements Engineering activities:
i. Inception ii. Elicitation iii. Elaboration
iv. Negotiation v. Specification vi. Validation
vii. Requirements Management 14M
UNIT–III
5. a) Explain Component-Level Design for WebApps. 7M
b) Explain different design Concepts in details. 7M
OR
6. What is an architectural design? How would you assess various alternative
architectural designs? 14M
UNIT–IV
7. a) What are the steps involved in user interface design? How is the interface
evaluation done? 7M
b) What categories of errors are traceable using Black-Box testing? Explain in
detail the following Black-Box testing methods i) Equivalence partitioning
ii) Boundary value analysis iii) Orthogonal Array testing 7M
OR
8. a) What are the unit testing considerations? What is the difference between test
stub and driver? What are the problems associated with Top-down integration? 7M
b) What are objectives of white-box testing? Explain in detail the following White
box testing techniques.
i) Data Flow Testing ii) Branch Testing. 7M
UNIT–V
9. a) What is software quality? Explain in detail
i) McCall’s Quality factors ii) ISO 9126 Quality factors. 7M
b) What are activities of software maintenance? 3M
c) What are the basic principles of project scheduling? 4M
OR
10 a) What is software configuration management? 7M
b) What are roles, features and contents of SCM repository? 7M
***

Page 1 of 1
 Hall Ticket Number :
R-15
Code: 5G155
III B.Tech. I Semester Regular & Supplementary Examinations November 2018
Web Technologies
( Computer Science and Engineering)
Max. Marks: 70 Time: 3 Hours
Answer all five units by choosing one question from each unit ( 5 x 14 = 70 Marks )
*********
UNIT–I
1 What is HTML table? Explain table element with necessary attributes. Write
the HTML code to print following table.
ONE TWO
FOUR
THREE SIX
FIVE
SEVEN EIGHT 14M
OR
2. What are different types of CSS available? Explain with examples. 14M
UNIT–II
3. What is DOM? Explain DOM and SAX using XML processors. 14M
OR
4. a) Explain XML Schema Architecture. 7M
b) What is XSLT? Describe with an example. 7M
UNIT–III
5. Discuss the following:
i) Driver manager 5M
ii) Database metadata 4M
iii) Querying database 5M
OR
6. a) Develop a JDBC program to retrieve data from the database using the steps
involve in the JDBC Program. 7M
b) Difference between Statement and Prepared Statement? 7M
UNIT–IV
7. a) Describe the lifecycle of servlet. 7M
b) Explain about handling HTTP request & response. 7M
OR
8. a) Using cookies, discuss session tracking. 7M
b) Illustrate with example how database is accessed using servlets. 7M
UNIT–V
9. List out the important elements used in Constructing JSP Page use at least
one element with suitable program 14M
OR
10. a) In JSP, explain how to display values using expressions to set an attribute? 7M
b) Discuss error handling and debugging in JSP applications. 7M
***
Page 1 of 1
Hall Ticket Number :
R-15
Code: 5G151
III B.Tech. I Semester Regular & Supplementary Examinations November 2018
Compiler Design
( Computer Science and Engineering)
Max. Marks: 70 Time: 3 Hours
Answer all five units by choosing one question from each unit ( 5 x 14 = 70 Marks )
*********
UNIT–I
1. a) Explain various compiler construction tools. 6M
b) Given a statement a=b+c*20.where a,b,c are real. Write the output for
every phase of compiler and describe its functionality. 8M
OR
2. a) What is LEX? Explain in detail different sections of LEX Program with a
suitable example. 6M
b) Write short notes on boot strapping with suitable example. 4M
c) Explain regular grammar and regular expression with examples. 4M
UNIT–II
3. a) State whether the grammar is LL(1) or not.
PD;S DD;D/a/ε
SS;S/b 8M
b) List preprocessing steps for applying predictive parsing. Illustrate with an
example 6M
OR
4. a) Construct recursive descent parser for the following grammar.
S Ab / Ba ABa / BB / ab Bab / bb / b 10M
b) Write the procedure to compute FIRST & FOLLOW. 4M
UNIT–III
5. a) Construct SLR parsing table for the given grammar and check whether
“ id or id and id” is a valid string or not.
EE or T ET
TT and F TF
Fid 10M
b) Write Syntax Direct Translation for converting infix expression to post fix
form. 4M
OR
6. a) Construct the CLR Parsing table for the following grammar
SCC CcC/d 8M
b) Discuss briefly about Equivalence of Type Expressions. 6M
UNIT–IV
7. a) Construct various three address code representations of an expression
X = -a * b + -a * b 6M
b) Discuss in detail about the Symbol table organization. 8M
OR
8. a) Describe briefly the types of Three address code with suitable example. 6M
b) Give an overview of various storage allocation strategies. 8M
Page 1 of 2
 Code: 5G151
UNIT–V
9. a) Write an algorithm for partition of blocks and apply it on the below
Basic Code.
1. prod = 0 6. t 4 = prod+ t3
2. i = 1 7. prod = t4
3. t1 = 4*i 8. t5 = i+1
4. t2 = a[t1] 9. i= t5
5. t3 = t2*10 10. if i < = 20 goto (3). 8M
b) Explain machine dependent and machine independent optimizations in
detail. 6M
OR
10. a) What is a Basic block? With a suitable example explain procedure for
identifying basic blocks. 6M
b) Distinguish local and global optimization. 4M
c) Write in detail about object code forms. 4M
***

Page 2 of 2
 Hall Ticket Number :
R-15
Code: 5G152
III B.Tech. I Semester Regular & Supplementary Examinations November 2018
Computer Networks
( Common to CSE & IT )
Max. Marks: 70 Time: 3 Hours
Answer all five units by choosing one question from each unit ( 5 x 14 = 70 Marks )
*********
UNIT–I
1. a) List two ways in which the OSI references model and the TCP/IP reference
model are the same. Also list two ways in which they differ. Discuss the layered
architecture of TCP/IP reference model. 10M
b) If a binary signal is sent over a 3-kHz channel whose signal to noise ratio is 20
dB, what is the maximum achievable data rate? 4M
OR
2. a) What are two reasons for using layered protocols? What is one possible
disadvantages of using layered protocols? 7M
b) Make a comparison between the fiber optics and copper wire. 7M
UNIT–II
3. a) An 8 bit byte with binary value 10101111 is to be encoded using an even parity
hamming code. What is the binary value after encoding? 5M
b) Explain about pure ALOHA and slotted ALOHA 9M
OR
4. a) With the help of neat diagram, explain the architecture of classical Ethernet. 7M
b) In the binary countdown protocol, explain how a lower numbered station may
be starved from sending a packet. 7M
UNIT–III
5. a) Describe the major differences between the ECN method and the RED method
of congestive avoidance. 5M
b) Explain in detail about the Link State Routing Algorithm with an example. 9M
OR
6. a) What is a Routing protocol? List and explain the principles of routing 9M
b) Convert the IP address whose hexadecimal representation is C22F1582 to
dotted decimal notation. 5M
UNIT–IV
7. Explain the following transport layer protocols. 14M
a) Simple protocol
b) Stop and wait protocol
c) Go-Back-N protocol
d) Selective Repeat Protocol
OR
8. a) Draw TCP header format. Write the significance of the components in TCP
header format 9M
b) Discuss the advantages and disadvantages of Delay Tolerant Networks. 5M
UNIT–V
9. a) Can a computer have two DNS names that fall in different top level domains?
If so give a plausible example. If not explain why not. 9M
b) Compare and contrast JPEG and MPEG standard. 5M
OR
10. Write a short notes on the following:
a) Web Proxies
b) Server Farms
c) SIP 14M
***
Page 1 of 1