ISO 9001 Q-1418

ISO 14001 E-223

BS OHSAS 18001 H-041

ELEMENTS AND SYSTEMS FOR

AGGRESSIVE MEDIA TRANSPORT

www.cinkarna.si
 ISO 9001 Q-1418
ISO 14001 E-223
BS OHSAS 18001 H-041

ET 4.1

Piping and coupling element protected with FEATURES

PTFE, PFA and FEP are used in all - practically absolute resistance to
environments which require high corrosion chemicals,
protection against mighty aggressive - high temperature resistance,
chemicals at high temperatures, - PTFE 260 °C,
physiologically neutral lining and non- - PFA 260 °C,
adhesive properties of such lining. In the - FEP 200 °C,
conditions of rapid temperature changes, - good anti-adhesive properties,
where ceramics, enamel and glass fail, the - absolute resistance to atmosphere and
fluoride artificial substances proved wear,
indispensable. Elevated hardness of the basic - physiologically neutral,
carrying material combined with excellent - very good insulation capacity,
properties of fluoride elements PTFE, PFA (electric and thermal),
and FEP, and applied according to the shape - resistance to impacts,
of the carrying element and operating - low maintenance costs,
conditions, yield best possible solutions. - long life.
Such protection ensures long life, simple
installation and considerably reduces the
maintenance costs.

PIPES
Pipes DIN 2848
- Interior lining:
pure PTFE or PTFE with filling upon
special request
- Length of pipes:
Lmax. DN 20-200 x 3000 mm

DN D1 s a d4 K D L1 L2 nxe
20 30 3 3 58 75 105 19 31 4x14
25 38,1 3,2 3 68 85 115 19 31 4x14
32 42,2 2,6 3 78 100 140 19 31 4x18
40 48,3 2,9 3 88 110 150 19 31 4x18
50 60,3 2,9 3 102 125 165 21 33 4x18
65 76,1 2,9 3 122 145 182 21 33 4x18
80 88,9 3,2 3 138 160 200 23 37 8x18
100 114,3 5 4 145 180 220 23 39 8x18
125 152 5 5 188 210 250 27 39 8x18
150 152 5 5 212 240 285 27 40 8x18
200 219,1 5,9 5 263 295 340 30 40 8x18

Metallurgical and Chemical Industry Celje d.d. Kidričeva 26, 3000 Celje, P.O.B 1032, SLOVENIA
Phone:+386 3 427 66 41,+386 3 427 66 45, +386 3 427 66 46 , fax: +386 3 427 66 39, e-mail: [email protected]
 ISO 9001 Q-1418
ISO 14001 E-223
BS OHSAS 18001 H-041

ET 4.2
T-JOINTS DIN 2848
Interior FEP, PFA C-antistatic

DN1 d1 DN 2 d2 lenght
L1 L2
20 35,0 20 35,0 95 95
25 42,5 25 42,5 110 110
20 35,0 95
32 48,0 130
32 48,0 25 42,5 130 110
20 35,0 95
40 55,0 150
32 48,0 130
40 55,0 25 42,5 150 110
20 35,0 100
50 63,5 120
40 55,0 150
50 63,5 32 48,0 120 130
25 42,5 110
65 82,5 140
50 63,5 120
65 82,5 40 55,0 140 150
32 48,0 130
80 90 165
65 82,5 140 ELBOWS 45° DIN 2848
80 90,0 50 63,5 165 120 Interior: PTFE, PTFE antistatic
40 55,0 150
100 114,3 205
80 90,0 165 DN d s L4
100 114,3 65 82,5 205 140 25 38,1 2,6 70
50 63,5 120 32 42,4 2,6 80
125 139,7 245 40 48,3 2,6 90
100 114,3 205 50 60,3 2,9 105
125 139,7 80 90,0 245 165 65 76,1 2,9 120
65 82,5 140 80 88,9 3,2 135
150 168,3 285 100 114,3 5 165
125 139,7 245 125 152 5 190
150 168,3 100 114,3 285 205 150 152 5 215
80 82,5 165

Metallurgical and Chemical Industry Celje d.d. Kidričeva 26, 3000 Celje, P.O.B 1032, SLOVENIA
Phone:+386 3 427 66 41,+386 3 427 66 45, +386 3 427 66 46 , fax: +386 3 427 66 39, e-mail: [email protected]
 ISO 9001 Q-1418
ISO 14001 E-223
BS OHSAS 18001 H-041

ET 4.3
ELBOWS 90° DIN 2848
Interior: PTFE, PTFE antistatic

DN d s L1 d4 Dk D
25 38,1 2,6 110 68 85 115
32 42,4 2,6 130 78 100 140
40 48,3 2,6 150 88 110 150
50 60,3 2,9 180 102 125 165
65 76,1 2,9 220 122 145 185
80 88,9 3,2 255 138 160 200
100 114,3 5 320 158 180 220
125 152 5 385 188 210 250
150 152 5 440 188 240 285

DN1 d1 DN2 d2 L
25 38,1 20 30,0 125
32 42,4 25 38,1 130
REDUCTION COUPLING DIN 2848 20 30,0
Interior:
32 42,4 150
PTFE, FEP, PFA C-antistatic
40 48,3 25 38,1 145
20 30,0
40 48,3 165
50 60,3 32 42,4
25 38,1 160
50 60,3 185
65 76,1 40 48,3 180
32 42,4
65 76,1 190
80 88,9 50 60,3
40 48,3 185
80 88,9 205
100 114,3 65 76,1 200
50 60,3
100 114,3 235
125 139,7 80 88,9
65 76,1 230
125 139,7
150 168,3 100 114,3 250
80 88,9

Metallurgical and Chemical Industry Celje d.d. Kidričeva 26, 3000 Celje, P.O.B 1032, SLOVENIA
Phone:+386 3 427 66 41,+386 3 427 66 45, +386 3 427 66 46 , fax: +386 3 427 66 39, e-mail: [email protected]
 ISO 9001 Q-1418
ISO 14001 E-223
BS OHSAS 18001 H-041

ET 4.4
REDUCTION FLANGES 2848
Interior: FEP, PFA C antistatic DN1 DN2 D d1 Dk1 Bolts d2 Dk2 Bolts L
d3 d4 d5
25 20 115 68 85 M12 58 75
32 20 140 78 100 58 75
25 68 85 M12
20 58 75
40 25 150 88 110 68 85
32 78 100 M16
20 58 75 M12
50 25 165 102 125 68 75
32 4 M16 - 78 100 M16
40 88 110
35
20 58 75 M12
25 68 85 4
65 32 185 122 145 78 100 M16
40 88 110
50 102 125
25 - 18 68 85 M12
32 78 100
80 40 200 138 160 M16 - 88 110
50 102 125 M16
65 122 145
25 8 68 68 M12
32 - 18 78 100
100 40 220 158 180 88 110
50 102 125
65 M16 - 122 145
80 138 160 8
32 78 100
40 - 18 88 110
50 102 125 4 M16
125 250 188 210 45
65 122 145
80 M16 - 138 160 8
100 158 180
40 88 110
50 - 22 102 125 4
65 122 145
150 80 285 212 240 138 160
100 M20 - 158 180 8
CLEARING PIECES DIN 2848 125 188 210
Interior: PTFE, FEP, PFA C antistatic
SCHAPE F SCHAPE G SHAPE H

DN d1 d3 d4 d5 b
20 16 26,9 58 60 12
25 22 38,1 68 70 12
32 31 42,4 78 82 12
40 37 48,3 88 92 12
50 48 60,3 102 107 14
65 64 76,1 122 127 14
80 76 88,9 138 142 16
100 101 114,3 158 182 16
125 125 139,7 188 192 18
150 153 168,3 212 218 18

Lenght (mm)
SCHAPE F 10 15 20
SCHAPE G 10 15 20 25 30 40 50 60 70 80 90
SCHAPE H 60 70 80 90 100

Metallurgical and Chemical Industry Celje d.d. Kidričeva 26, 3000 Celje, P.O.B 1032, SLOVENIA
Phone:+386 3 427 66 41,+386 3 427 66 45, +386 3 427 66 46 , fax: +386 3 427 66 39, e-mail: [email protected]
 ISO 9001 Q-1418
ISO 14001 E-223
BS OHSAS 18001 H-041

ET 4.5
T-JOINTS FOR INSTRUMENTS DIN 2848 DN1 DN2 L H
Interior: FEP, PFA C-antistatic 25
25 20 50 90
15
25
32 20 50 100
15
32 75
40 25
20 50 110
15
40 75
32
50 25 120
20 50
15
40 75
32
65 25 140
20 50
15
50 100
40 75
32
80 25 140
20 50
15
50 100
40 75
32
100 25 150
REMOVABLE FILTERS DIN 2848 20 50
15
Interior: FEP, PFA C-antistatic

Measures in mm
DN d D Dk L nxd
15 13 95 65 115 4x14
20 18 105 75 120 4x14
25 24 115 85 125 4x14
32 32 140 100 130 4x18
40 38 150 110 140 4x18
50 48 165 125 150 4x18
65 62 185 145 170 4x18
80 76 200 160 180 8x18
100 96 220 180 190 8x18
125 125 250 210 200 8x18
150 120 285 240 210 8x18
BLIND FLANGES DIN 2848
Washer: PTFE

Metallurgical and Chemical Industry Celje d.d. Kidričeva 26, 3000 Celje, P.O.B 1032, SLOVENIA
Phone:+386 3 427 66 41,+386 3 427 66 45, +386 3 427 66 46 , fax: +386 3 427 66 39, e-mail: [email protected]
 ISO 9001 Q-1418
ISO 14001 E-223
BS OHSAS 18001 H-041

ET 4.1

Piping and coupling element protected with FEATURES

PTFE, PFA and FEP are used in all - practically absolute resistance to
environments which require high corrosion chemicals,
protection against mighty aggressive - high temperature resistance,
chemicals at high temperatures, - PTFE 260 °C,
physiologically neutral lining and non- - PFA 260 °C,
adhesive properties of such lining. In the - FEP 200 °C,
conditions of rapid temperature changes, - good anti-adhesive properties,
where ceramics, enamel and glass fail, the - absolute resistance to atmosphere and
fluoride artificial substances proved wear,
indispensable. Elevated hardness of the basic - physiologically neutral,
carrying material combined with excellent - very good insulation capacity,
properties of fluoride elements PTFE, PFA (electric and thermal),
and FEP, and applied according to the shape - resistance to impacts,
of the carrying element and operating - low maintenance costs,
conditions, yield best possible solutions. - long life.
Such protection ensures long life, simple
installation and considerably reduces the
maintenance costs.

PIPES
ASME/ANSI B16.5 Classe 150
- Interior lining:
pure PTFE or PTFE with filling upon special request
- Length of pipes:
Lmax. DN 1/2˝-8˝ x 3000 mm

DN D K d4 nxe D1 s a L1 L2
1/2˝ 88,9 60,3 35 4x16 30 3 3 19 31
3/4˝ 98,4 69,8 43 4x16 30 3 3 19 31
1˝ 107,9 79,4 51 4x16 38,1 3,2 3 19 31
1 1/4˝ 117,5 88,9 64 4x16 42,2 2,6 3 19 31
1 1/4˝ 127,0 98,4 73 4x16 48,3 2,9 3 19 31
2˝ 152,4 120,6 92 4x19 60,3 2,9 3 21 33
2 1/2˝ 177,8 139,7 105 4x19 76,1 2,9 3 21 33
3˝ 190,5 152,4 127 4x19 88,9 3,2 3 23 37
4˝ 228,6 190,5 158 8x19 114,3 5 4 23 39
5˝ 254,0 215,9 186 8x22 152 5 5 27 39
6˝ 279,4 241,3 216 8x22 152 5 5 27 40
8˝ 342,9 298,4 270 8x22 219,1 5,9 5 30 40

Metallurgical and Chemical Industry Celje d.d. Kidričeva 26, 3000 Celje, P.O.B 1032, SLOVENIA
Phone:+386 3 427 66 41,+386 3 427 66 45, +386 3 427 66 46 , fax: +386 3 427 66 39, e-mail: [email protected]
 ISO 9001 Q-1418
ISO 14001 E-223
BS OHSAS 18001 H-041

ET 4.2
T-JOINTS ASME/ANSI B16.5 Class 150
Interior FEP, PFA C-antistatic

DN1 d1 DN 2 d2 lenght
(mm) (mm) L1(mm) L2(mm)
1/2˝ 30 1/2˝ 30 65 65
3/4˝ 35,0 3/4˝ 35,0 75 75
1/2˝ 30
1˝ 42,5
1˝ 42,5 3/4˝ 35,0 89 89
1/2˝ 30
1 1/4˝ 48,0
1 1/4˝ 48,0 1˝ 42,5 95 95
3/4˝ 35,0
1 1/2˝ 55,0
1 1/4˝ 48,0
1 1/2˝ 55,0 1˝ 42,5 102 102
3/4˝ 35,0
2˝ 63,5
1 1/2˝ 55,0
2˝ 63,5 1 1/4˝ 48,0 114 114
1˝ 42,5
2 1/2˝ 82,5
2˝ 63,5
2 1/2˝ 82,5 1 1/2˝ 55,0 127 127 ELBOWS 45° ASME/ANSI B16.5 Class 150
1 1/4˝ 48,0 Interior: PTFE, PTFE antistatic
3˝ 90
2 1/2˝ 82,5 DN d s L4
3˝ 90,0 2˝ 63,5 140 140 mm mm mm
1 1/2˝ 55,0 1/2˝ 30 2,9 45
4˝ 114,3 3/4˝ 30 2,9 45
3˝ 90,0 1˝ 38,1 2,6 45
4˝ 114,3 2 1/2˝ 82,5 165 165 1 1/4˝ 42,4 2,6 51
2˝ 63,5 1 1/2˝ 48,3 2,6 57
5˝ 139,7 2˝ 60,3 2,9 64
4˝ 114,3 2 1/2˝ 76,1 2,9 76
5˝ 139,7 3˝ 90,0 190 190 3˝ 88,9 3,2 76
2 1/2˝ 82,5 4˝ 114,3 5 102
6˝ 168,3 5˝ 152 5 114
5˝ 139,7 6˝ 152 5 127
6˝ 168,3 4˝ 114,3 203 203
3˝ 82,5

Metallurgical and Chemical Industry Celje d.d. Kidričeva 26, 3000 Celje, P.O.B 1032, SLOVENIA
Phone:+386 3 427 66 41,+386 3 427 66 45, +386 3 427 66 46 , fax: +386 3 427 66 39, e-mail: [email protected]